(/srv/buildbot_cmake/full_cmake/build/ntoskrnl/kd/kdio.c:326) ----------------------------------------------------- (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/kd/kdio.c:327) ReactOS 0.4-SVN (Build 20120913-r57292) (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/kd/kdio.c:329) 1 System Processor [0 MB Memory] (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/kd/kdio.c:330) Command Line: /DEBUG /DEBUGPORT=COM1 /BAUDRATE=115200 /SOS /MININT (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/kd/kdio.c:334) ARC Paths: multi(0)disk(0)cdrom(111) \ multi(0)disk(0)cdrom(111) \reactos\ (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/ke/i386/cpu.c:494) Supported CPU features : KF_V86_VIS KF_RDTSC KF_CR4 KF_CMOV KF_GLOBAL_PAGE KF_LARGE_PAGE KF_MTRR KF_CMPXCHG8B KF_MMX KF_WORKING_PTE KF_PAT KF_FXSR KF_FAST_SYSCALL KF_XMMI KF_XMMI64 KF_DTS KF_NX_BIT (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/ke/i386/cpu.c:801) Prefetch Cache: 64 bytes L2 Cache: 0 bytes L2 Cache Line: 64 bytes L2 Cache Associativity: 0 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/mm/ARM3/expool.c:925) EXPOOL: Pool Tracker Table at: 0xB71A9000 with 0xe01c bytes (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/mm/ARM3/expool.c:927) EXPOOL: Big Pool Tracker Table at: 0xB7199000 with 0x10000 bytes (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/mm/ARM3/mminit.c:1430) HAL I/O Mapping at FFFE0000 is unsafe (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/mm/mminit.c:262) 0x80000000 - 0x81800000 Boot Loaded Image (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/mm/mminit.c:266) 0xB0000000 - 0xB1200000 PFN Database (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/mm/mminit.c:270) 0xB1200000 - 0xB71B8000 ARM3 Non Paged Pool (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/mm/mminit.c:274) 0xBB000000 - 0xBD000000 System View Space (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/mm/mminit.c:278) 0xBD000000 - 0xC0000000 Session Space (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/mm/mminit.c:281) 0xC0000000 - 0xC03FFFFF Page Tables (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/mm/mminit.c:284) 0xC0300000 - 0xC0300FFF Page Directories (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/mm/mminit.c:287) 0xC0400000 - 0xC07FFFFF Hyperspace (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/mm/mminit.c:291) 0xE1000000 - 0xECC00000 ARM3 Paged Pool (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/mm/mminit.c:294) 0xECC00000 - 0xF7BE0000 System PTE Space (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/mm/mminit.c:297) 0xF7BE0000 - 0xFFBE0000 Non Paged Pool Expansion PTE Space (/srv/buildbot_cmake/full_cmake/build/hal/halx86/legacy/bussupp.c:591) Your machine has a PCI-to-PCI or CardBUS Bridge. PCI devices may fail! (/srv/buildbot_cmake/full_cmake/build/hal/halx86/legacy/bussupp.c:620) Found parent bus (indicating PCI Bridge). PCI devices may fail! ====== PCI BUS HARDWARE DETECTION ======= 00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 10) Subsystem: P5KPL-VM Motherboard [1043:82b0] Flags: bus master, fast devsel, latency 0 00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 10) Subsystem: Unknown [0000:0000] Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at 00040400 (32-bit, non-prefetchable) [size=1K] Memory at 2000e0e0 (32-bit, non-prefetchable) [size=8K] Memory at feb0fa00 (32-bit, non-prefetchable) [size=512] I/O ports at dff1d000 [size=4K] 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01) Subsystem: P5KPL-CM Motherboard [1043:82ea] Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at f9ef8000 (64-bit, non-prefetchable) [size=32K] Device is using IRQ 10! ISA Cards using that IRQ may fail! 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01) Subsystem: Unknown [0000:0000] Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at 00030300 (32-bit, non-prefetchable) [size=256] Memory at 200000f0 (32-bit, non-prefetchable) [size=512M] Memory at 0000fff0 (32-bit, non-prefetchable) [size=256] I/O ports at 1fff0 [size=16] 00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 01) Subsystem: Unknown [0000:0000] Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at 00020200 (32-bit, non-prefetchable) [size=512] Memory at 2000d0d0 (32-bit, non-prefetchable) [size=4K] Memory at f9f0f9f0 (32-bit, non-prefetchable) [size=256] I/O ports at 1fff0 [size=16] 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 01) Subsystem: P5KPL-VM Motherboard [1043:8179] Flags: bus master, medium devsel, latency 0, IRQ 03 I/O ports at b000 [size=4K] Device is using IRQ 3! ISA Cards using that IRQ may fail! Device is an Intel UHCI (USB) Controller. Turn off Legacy USB in your BIOS! 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 01) Subsystem: P5KPL-VM Motherboard [1043:8179] Flags: bus master, medium devsel, latency 0, IRQ 05 I/O ports at b080 [size=128] Device is using IRQ 5! ISA Cards using that IRQ may fail! Device is an Intel UHCI (USB) Controller. Turn off Legacy USB in your BIOS! 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 01) Subsystem: P5KPL-VM Motherboard [1043:8179] Flags: bus master, medium devsel, latency 0, IRQ 15 I/O ports at b400 [size=1K] Device is using IRQ 15! ISA Cards using that IRQ may fail! Device is an Intel UHCI (USB) Controller. Turn off Legacy USB in your BIOS! 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 01) Subsystem: P5KPL-VM Motherboard [1043:8179] Flags: bus master, medium devsel, latency 0, IRQ 10 I/O ports at b480 [size=128] Device is using IRQ 10! ISA Cards using that IRQ may fail! Device is an Intel UHCI (USB) Controller. Turn off Legacy USB in your BIOS! 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01) Subsystem: P5KPL-VM Motherboard [1043:8179] Flags: bus master, medium devsel, latency 0, IRQ 03 Memory at f9effc00 (32-bit, non-prefetchable) [size=1K] Device is using IRQ 3! ISA Cards using that IRQ may fail! Device is an Intel UHCI (USB) Controller. Turn off Legacy USB in your BIOS! 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) Subsystem: Unknown [0000:0000] Flags: bus master, fast devsel, latency 0 Memory at 20010100 (32-bit, non-prefetchable) [size=256] Memory at 228000f0 (32-bit, non-prefetchable) [size=8M] Memory at 0000fff0 (32-bit, non-prefetchable) [size=256] I/O ports at 1fff0 [size=16] 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01) Subsystem: P5KPL-VM Motherboard [1043:8179] Flags: bus master, medium devsel, latency 0 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) Subsystem: P5KPL-VM Motherboard [1043:8179] Flags: bus master, medium devsel, latency 0, IRQ 15 I/O ports at c080 [size=128] I/O ports at c000 [size=16K] I/O ports at 08f0 [size=16] I/O ports at 08f8 [size=8] I/O ports at b800 [size=2K] 00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller [8086:27c0] (rev 01) Subsystem: P5KPL-VM Motherboard [1043:8179] Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 05 I/O ports at cc00 [size=1K] I/O ports at c880 [size=128] I/O ports at c800 [size=2K] I/O ports at c480 [size=128] I/O ports at c400 [size=1K] 00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01) Subsystem: P5KPL-VM Motherboard [1043:8179] Flags: medium devsel, latency 0, IRQ 05 I/O ports at 0400 [size=1K] Device is using IRQ 5! ISA Cards using that IRQ may fail! 02:00.0 Ethernet controller [0200]: Attansic Technology Corp. Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller [1969:1026] (rev b0) Subsystem: P5KPL-CM Motherboard [1043:8304] Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at f9fc0000 (64-bit, non-prefetchable) [size=256K] I/O ports at dc00 [size=1K] Device is using IRQ 11! ISA Cards using that IRQ may fail! 04:00.0 VGA compatible controller [0300]: nVidia Corporation G92 [GeForce 9800 GT] [10de:0614] (rev a2) Subsystem: Unknown [1019:1a0e] Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at fa000000 (64-bit, non-prefetchable) [size=32M] I/O ports at ec00 [size=1K] Device is using IRQ 10! ISA Cards using that IRQ may fail! ====== PCI BUS DETECTION COMPLETE ======= PC Compatible Eisa/Isa HAL Detected (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:3188) Firmware mapper is enabled (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpreport.c:353) Reported device: DETECTEDInternal\PCI_HAL (Root\PCI_HAL\0) ATAPI IDE MiniPort Driver (UniATA) v 0.44 Parameter PrintLogo Parameter PrintLogo = 0x0 Locate NTOSKRNL.EXE CrNtFindModuleBaseByPtr 0x809439e4, NtBuildNumber CrNtGetProcAddress 0x80800000, NtBuildNumber CrNtGetProcAddress: 0x809439e4 CrNtFindModuleBaseByPtr: 0x80800000 CrNtGetProcAddress 0x80800000, KeNumberProcessors CrNtGetProcAddress: 0x80993280 CrNtFindModuleBaseByPtr 0x8034fe41, HalDisplayString CrNtGetProcAddress 0x8034e000, HalDisplayString CrNtGetProcAddress: 0x8034fe41 CrNtFindModuleBaseByPtr: 0x8034e000 CrNtGetProcAddress 0x80800000, ZwQuerySystemInformation CrNtGetProcAddress: 0x808437b4 CrNtGetProcAddress 0x80800000, PsGetVersion CrNtGetProcAddress: 0x808f3090 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/ex/sysinfo.c:116) User-mode list not yet supported in ReactOS! Init PsGetCurrentProcessId cur 0 CrNtGetProcAddress 0x80800000, PsGetCurrentProcessId CrNtGetProcAddress: 0x808f10af GetProcAddr(NTOSKRNL.EXE,PsGetCurrentProcessId) = 808f10af final Init PsGetCurrentThreadId cur 0 CrNtGetProcAddress 0x80800000, PsGetCurrentThreadId CrNtGetProcAddress: 0x808fac40 GetProcAddr(NTOSKRNL.EXE,PsGetCurrentThreadId) = 808fac40 final Init KeTestSpinLock cur 0 CrNtGetProcAddress 0x80800000, KeTestSpinLock CrNtGetProcAddress: 0x80886682 GetProcAddr(NTOSKRNL.EXE,KeTestSpinLock) = 80886682 final Init InterlockedIncrement cur 0 CrNtGetProcAddress 0x80800000, InterlockedIncrement CrNtGetProcAddress: 0x80830c93 GetProcAddr(NTOSKRNL.EXE,InterlockedIncrement) = 80830c93 final Init InterlockedDecrement cur 0 CrNtGetProcAddress 0x80800000, InterlockedDecrement CrNtGetProcAddress: 0x80830c8a GetProcAddr(NTOSKRNL.EXE,InterlockedDecrement) = 80830c8a final Init InterlockedExchangeAdd cur 0 CrNtGetProcAddress 0x80800000, InterlockedExchangeAdd CrNtGetProcAddress: 0x80830c6e GetProcAddr(NTOSKRNL.EXE,InterlockedExchangeAdd) = 80830c6e final Init InterlockedCompareExchange cur 0 CrNtGetProcAddress 0x80800000, InterlockedCompareExchange CrNtGetProcAddress: 0x80830c7f GetProcAddr(NTOSKRNL.EXE,InterlockedCompareExchange) = 80830c7f final Init HAL.DLL,KeRaiseIrqlToDpcLevel cur 0 CrNtGetProcAddress 0x8034e000, KeRaiseIrqlToDpcLevel CrNtGetProcAddress: 0x80359901 GetProcAddr(HAL.DLL,KeRaiseIrqlToDpcLevel) = 80359901 final 80359901 Init HAL.DLL,KeRaiseIrqlToSynchLevel cur 0 CrNtGetProcAddress 0x8034e000, KeRaiseIrqlToSynchLevel CrNtGetProcAddress: 0x80359926 GetProcAddr(HAL.DLL,KeRaiseIrqlToSynchLevel) = 80359926 final 80359926 Init NDIS.SYS,NdisInitializeReadWriteLock cur 0 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/ex/sysinfo.c:116) User-mode list not yet supported in ReactOS! (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/ex/sysinfo.c:116) User-mode list not yet supported in ReactOS! CrNtGetProcAddress 0xf78fc000, NdisInitializeReadWriteLock CrNtGetProcAddress: 0xf7902136 GetProcAddr(NDIS.SYS,NdisInitializeReadWriteLock) = f7902136 final f7902136 Init NDIS.SYS,NdisAcquireReadWriteLock cur 0 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/ex/sysinfo.c:116) User-mode list not yet supported in ReactOS! (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/ex/sysinfo.c:116) User-mode list not yet supported in ReactOS! CrNtGetProcAddress 0xf78fc000, NdisAcquireReadWriteLock CrNtGetProcAddress: 0xf7901ffc GetProcAddr(NDIS.SYS,NdisAcquireReadWriteLock) = f7901ffc final f7901ffc Init NDIS.SYS,NdisReleaseReadWriteLock cur 0 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/ex/sysinfo.c:116) User-mode list not yet supported in ReactOS! (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/ex/sysinfo.c:116) User-mode list not yet supported in ReactOS! CrNtGetProcAddress 0xf78fc000, NdisReleaseReadWriteLock CrNtGetProcAddress: 0xf7901f9f GetProcAddr(NDIS.SYS,NdisReleaseReadWriteLock) = f7901f9f final f7901f9f check CPU Gen CPU Gen 6 ILOCK ok UniATA Init: OS ver 5.2 (-1073738034), 1 CPU(s) Performance calibration: dt=14995, counter=3038027 InitBadBlocks general InitBadBlocks returned: 0xc0000034 UniataInitAtaCommands: Parameter SkipRaids Parameter SkipRaids = 0x1 Parameter ForceSimplex Parameter ForceSimplex = 0x0 Parameter LogToDisplay Parameter LogToDisplay = 0x0 HwInitializationDataSize = 50 set NeedPhysicalAddresses = TRUE set AtapiAdapterControl() ptr ATAPI IDE enum supported BusMaster Devices Parameter VirtualMachineType Parameter VirtualMachineType = 0x0 Parameter VirtualBox Parameter VirtualBox = 0x0 -- BusID: 0x0:0x1f:0x1 Storage Class DevId = 27DF8086 Class = 0001/0001, ProgIf 8F (!) InterruptPin = 0x1 (!) InterruptLine = 0xf Parameter Include Parameter Include = 0x0 No force include, check exclude Parameter Exclude Parameter Exclude = 0x0 Default device found, pass 0 InterruptPin = 0x1 InterruptLine = 0xf Enabling Mem/Io spaces and busmastering... Initial pciData.Command = 0x5 PCI_ENABLE_IO_SPACE PCI_ENABLE_MEMORY_SPACE New pciData.Command = 0x5 PCI_ENABLE_BUS_MASTER InterruptLine = 0xf Final pciData.Command = 0x5 Range 0 = 0xc081 Range 1 = 0xc001 Range 2 = 0x8f1 Range 3 = 0x8f9 Range 4 = 0xb801 count: BMListLen++ -- BusID: 0x0:0x1f:0x2 Storage Class DevId = 27C08086 Class = 0001/0001, ProgIf 8F Parameter Include Parameter Include = 0x0 No force include, check exclude Parameter Exclude Parameter Exclude = 0x0 Default device found, pass 0 InterruptPin = 0x2 InterruptLine = 0x5 Enabling Mem/Io spaces and busmastering... Initial pciData.Command = 0x5 PCI_ENABLE_IO_SPACE PCI_ENABLE_MEMORY_SPACE New pciData.Command = 0x5 PCI_ENABLE_BUS_MASTER InterruptLine = 0x5 Final pciData.Command = 0x5 Range 0 = 0xcc01 Range 1 = 0xc881 Range 2 = 0xc801 Range 3 = 0xc481 Range 4 = 0xc401 count: BMListLen++ -- BusID: 0x0:0x1f:0x1 Storage Class DevId = 27DF8086 Class = 0001/0001, ProgIf 8F (!) InterruptPin = 0x1 (!) InterruptLine = 0xf Parameter Include Parameter Include = 0x0 No force include, check exclude Parameter Exclude Parameter Exclude = 0x0 Default device found, pass 1 InterruptPin = 0x1 InterruptLine = 0xf Range 0 = 0xc081 Range 1 = 0xc001 Range 2 = 0x8f1 Range 3 = 0x8f9 Range 4 = 0xb801 found suitable device -- BusID: 0x0:0x1f:0x2 Storage Class DevId = 27C08086 Class = 0001/0001, ProgIf 8F Parameter Include Parameter Include = 0x0 No force include, check exclude Parameter Exclude Parameter Exclude = 0x0 Default device found, pass 1 InterruptPin = 0x2 InterruptLine = 0x5 Range 0 = 0xcc01 Range 1 = 0xc881 Range 2 = 0xc801 Range 3 = 0xc481 Range 4 = 0xc401 found suitable device -- BusID: 0x0:0x1f:0x1 Storage Class DevId = 27DF8086 Class = 0001/0001, ProgIf 8F (!) InterruptPin = 0x1 (!) InterruptLine = 0xf Parameter Include Parameter Include = 0x0 No force include, check exclude Parameter Exclude Parameter Exclude = 0x0 Default device found, pass 2 InterruptPin = 0x1 InterruptLine = 0xf Range 0 = 0xc081 Range 1 = 0xc001 Range 2 = 0x8f1 Range 3 = 0x8f9 Range 4 = 0xb801 found suitable device Add to BMList, AltInit 0 -- BusID: 0x0:0x1f:0x2 Storage Class DevId = 27C08086 Class = 0001/0001, ProgIf 8F Parameter Include Parameter Include = 0x0 No force include, check exclude Parameter Exclude Parameter Exclude = 0x0 Default device found, pass 2 InterruptPin = 0x2 InterruptLine = 0x5 Range 0 = 0xcc01 Range 1 = 0xc881 Range 2 = 0xc801 Range 3 = 0xc481 Range 4 = 0xc401 found suitable device Add to BMList, AltInit 0 BMListLen=2 Parameter WaitBusyCount Parameter WaitBusyCount = 0xc8 Parameter WaitBusyDelay Parameter WaitBusyDelay = 0xa Parameter WaitDrqDelay Parameter WaitDrqDelay = 0xa Parameter WaitBusyLongCount Parameter WaitBusyLongCount = 0x7d0 Parameter WaitBusyLongDelay Parameter WaitBusyLongDelay = 0xfa Parameter AtapiSendDisableIntr Parameter AtapiSendDisableIntr = 0x0 Parameter AtapiDmaRawRead Parameter AtapiDmaRawRead = 0x1 Parameter MaxIsrWait Parameter MaxIsrWait = 0x28 ATAPI IDE: Look for legacy ISA-bridged PCI IDE controller (onboard) ATAPI IDE: BMListLen 2 !BMList[i].MasterDev ATAPI IDE: Look for PCI IDE controller ATAPI IDE: i 0, BMListLen 2 Parameter IgnoreNativePci Parameter IgnoreNativePci = 0x0 Try init 8086 27df (/srv/buildbot_cmake/full_cmake/build/hal/halx86/legacy/bussupp.c:1152) Slot assignment for 5 on bus 0 (/srv/buildbot_cmake/full_cmake/build/hal/halx86/legacy/bus/pcibus.c:719) WARNING: PCI Slot Resource Assignment is FOOBAR UniataFindBusMasterController: Context=0, BMListLen=2 ConfigInfo->Length 8c bm_offset 0, channel 0 AdapterInterfaceType=0x5 IoBusNumber=0x0 slotNumber=0x3f busDataRead DevId = 27DF8086 Class = 0001/0001 Storage Class UniataChipDetect: HwFlags: 0x0 Parameter ForceSimplex Parameter ForceSimplex = 0x0 i: 0x28 VendorID/DeviceID/Rev 0x8086/0x27df/0x1 i: 0x18 HwFlags: 0x0 Parameter HwFlagsOverride Parameter HwFlagsOverride = 0x0 HwFlagsOverride: 0x0 Parameter HwFlagsAdd Parameter HwFlagsAdd = 0x0 HwFlagsAdd: 0x0 HwFlags (final): 0x0 MaxTransferMode: 0x45 Parameter MaxTransferMode Parameter MaxTransferMode = 0x45 MaxTransferMode (overriden): 0x45 UniataChipDetectChannels: allocate 2 Luns for 2 channels ForceSimplex = 0 HwFlags = 0 (0)HwFlags = 0 (1)HwFlags = 0 (2)found suitable device HwFlags = 0 (3)Range 0 = 0xc081 Range 1 = 0xc001 Range 2 = 0x8f1 Range 3 = 0x8f9 Range 4 = 0xb801 IsBusMaster == TRUE AtapiGetIoRange: AtapiGetIoRange: rid 0x4, start 0xb800, offs 0x0, len 0x10, mem 0x0 AtapiGetIoRange: (2) 0xb800 BusMasterAddress (base): 0xb800 IsBusMaster == TRUE && !MasterDev BM statusByte = 4 AtapiReadChipConfig: devExt 0xb71742b4 AtapiReadChipConfig: dev 0x0, ph chan -1 Parameter ForceSimplex Parameter ForceSimplex = 0x0 MaxTransferMode (base): 0x45 Parameter MaxTransferMode Parameter MaxTransferMode = 0x45 MaxTransferMode (overriden): 0x45 Parameter MaxTransferMode Parameter MaxTransferMode = 0x45 MaxTransferMode (overriden): 0x45 Parameter AtapiDmaZeroTransfer Parameter AtapiDmaZeroTransfer = 0x0 Parameter AtapiDmaControlCmd Parameter AtapiDmaControlCmd = 0x0 Parameter AtapiDmaRawRead Parameter AtapiDmaRawRead = 0x1 Parameter AtapiDmaReadWrite Parameter AtapiDmaReadWrite = 0x1 AtapiChipInit: dev 0x0, ph chan -2, c -1 HwFlags: 0x0 VendorID/DeviceID/Rev 0x8086/0x27df/0x1 AtapiChipInit: dev 0x0, ph chan 0, c 0 HwFlags: 0x0 VendorID/DeviceID/Rev 0x8086/0x27df/0x1 intel 80-pin check (reg54=0) check failed (not supported) AtapiChipInit: dev 0x0, ph chan 1, c 1 HwFlags: 0x0 VendorID/DeviceID/Rev 0x8086/0x27df/0x1 intel 80-pin check (reg54=0) check failed (not supported) simplexOnly = 0 (2)!MasterDev update ConfigInfo->nt4 using AtaReq sz 1000 update ConfigInfo->w2k: 64bit 0 chan[0] InterruptMode: 0, Level 15, Level2 0, Vector 15, Vector2 0 Reconstruct ConfigInfo set Dma32BitAddresses BMList[i].channel 0x0, NumberChannels 0x2, channel 0x0 de 0xb71742b4, Channel 0x0 chan = 0xb71748c8 AtapiSetupLunPtrs for channel 0 of 2, 2 luns Chan 0xb71748c8 Lun 0x0 Lun ptr 0xb6f1e000 Lun 0x1 Lun ptr 0xb6f1e308 AtapiReadChipConfig: devExt 0xb71742b4 AtapiReadChipConfig: dev 0x0, ph chan 0 Parameter MaxTransferMode Parameter MaxTransferMode = 0x45 MaxTransferMode (overriden): 0x45 Parameter ReorderEnable Parameter ReorderEnable = 0x1 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x45 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x45 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 Getting IO ranges !MasterDev mode IO range 1 0xc080 IO range 2 0xc002 IDX_IO1 0->c080(io) IDX_IO2 10->c002(io) IDX_BM_IO 14->b800(io) IDX_SATA_IO 19->0(io) AltStatus (0x7f) Reg_0x1 (0xc081) = 0x7f Reg_0x2 (0xc082) = 0x7f Reg_0x3 (0xc083) = 0x7f Reg_0x4 (0xc084) = 0x7f Reg_0x5 (0xc085) = 0x7f Reg_0x6 (0xc086) = 0x7f Reg_0x7 (0xc087) = 0x7f BM_0x0 (0xb800) = 0x0 BM_0x1 (0xb801) = 0x0 BM_0x2 (0xb802) = 0x4 BM_0x3 (0xb803) = 0x0 clean IDE intr 0 clean IDE intr 1 DMA status 0x4 clear unexpected DMA intr AtapiDmaDone: dev 0 AtapiDmaAlloc: allocate tmp buffers below 4Gb de 0xb71742b4, Channel 0x1 chan = 0xb7174b30 AtapiSetupLunPtrs for channel 1 of 2, 2 luns Chan 0xb7174b30 Lun 0x0 Lun ptr 0xb6f1e610 Lun 0x1 Lun ptr 0xb6f1e918 AtapiReadChipConfig: devExt 0xb71742b4 AtapiReadChipConfig: dev 0x0, ph chan 1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x45 MaxTransferMode (overriden): 0x45 Parameter ReorderEnable Parameter ReorderEnable = 0x1 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x45 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x45 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 Getting IO ranges !MasterDev mode IO range 1 0x8f0 IO range 2 0x8fa IDX_IO1 0->8f0(io) IDX_IO2 10->8fa(io) IDX_BM_IO 14->b808(io) IDX_SATA_IO 19->0(io) AltStatus (0xff) Reg_0x1 (0x8f1) = 0xff Reg_0x2 (0x8f2) = 0xff Reg_0x3 (0x8f3) = 0xff Reg_0x4 (0x8f4) = 0xff Reg_0x5 (0x8f5) = 0xff Reg_0x6 (0x8f6) = 0xff Reg_0x7 (0x8f7) = 0xff BM_0x0 (0xb808) = 0x0 BM_0x1 (0xb809) = 0x0 BM_0x2 (0xb80a) = 0x0 BM_0x3 (0xb80b) = 0x0 clean IDE intr 0 clean IDE intr 1 DMA status 0x0 AtapiDmaAlloc: allocate tmp buffers below 4Gb exit: init spinlock MasterDev=0x0, NumberChannels=0x2, Isr2DevObj=0x0 Init ISR: Multichannel native mode, go... Create DO DO name: len(38, 38), \Device\uniata0_2ch HalGetInterruptVector OrigAdapterInterfaceType=5 SystemIoBusNumber=0 BusInterruptLevel=15 BusInterruptVector=15 isr2_de 0xb7174798 isr2_vector 0x3f isr2_irql 0xc isr2_affinity 0x1 IoConnectInterrupt MasterDev=0x0, NumberChannels=0x2, Isr2DevObj=0xb71746e0 final chan[2] InterruptMode: 0, Level 15, Level2 0, Vector 15, Vector2 0 return SP_RETURN_FOUND AtapiHwInitialize: (base) AtapiChipInit: dev 0xffffffff, ph chan -1, c -1 HwFlags: 0x0 VendorID/DeviceID/Rev 0x8086/0x27df/0x1 AtapiChipInit: dev 0xffffffff, ph chan 0, c 0 HwFlags: 0x0 VendorID/DeviceID/Rev 0x8086/0x27df/0x1 intel 80-pin check (reg54=0) check failed (not supported) FindDevices: AtapiDisableInterrupts_0: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x0 nobody home! 0x2a != 0xAA CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 7f: DMA status 0x0 nobody home! 0x2a != 0xAA AtapiEnableInterrupts_0: 1 FindDevices: returning 0 AtapiHwInitialize: lChannel 0x0, dev 0 AtapiHwInitialize: lChannel 0x0, dev 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x0 VendorID/DeviceID/Rev 0x8086/0x27df/0x1 intel 80-pin check (reg54=0) check failed (not supported) FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 ff: DMA status 0x0 nobody home! 0xff != 0x55 CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 ff: DMA status 0x0 nobody home! 0xff != 0x55 AtapiEnableInterrupts_1: 1 FindDevices: returning 0 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiHwInitialize: (base) done TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x27df8086/0x1 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf78f9e34 TopLevel (3), AtaReq 0xb7161000 nobody home! 0x2a != 0xAA AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf78f9e34 complete with status 0xa AtapiStartIo: AtapiDmaDBSync(b71748c8, f78f9e34) AtapiStartIo: UniataRemoveRequest(b71748c8, f78f9e34) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71748c8, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1 VendorID+DeviceID/Rev 0x27df8086/0x1 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf78f9e34 TopLevel (3), AtaReq 0xb7161000 nobody home! 0x2a != 0xAA AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf78f9e34 complete with status 0xa AtapiStartIo: AtapiDmaDBSync(b71748c8, f78f9e34) AtapiStartIo: UniataRemoveRequest(b71748c8, f78f9e34) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71748c8, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x27df8086/0x1 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf78f9e34 TopLevel (3), AtaReq 0xb7161000 nobody home! 0xff != 0x55 AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf78f9e34 complete with status 0xa AtapiStartIo: AtapiDmaDBSync(b7174b30, f78f9e34) AtapiStartIo: UniataRemoveRequest(b7174b30, f78f9e34) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b7174b30, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27df8086/0x1 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf78f9e34 TopLevel (3), AtaReq 0xb7161000 nobody home! 0xff != 0x55 AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf78f9e34 complete with status 0xa AtapiStartIo: AtapiDmaDBSync(b7174b30, f78f9e34) AtapiStartIo: UniataRemoveRequest(b7174b30, f78f9e34) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b7174b30, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x0:0x0 VendorID+DeviceID/Rev 0x27df8086/0x1 AtapiStartIo: Communication port INQUIRY AtapiStartIo: Srb 0xf78f9e34 complete with status 0x1 AtapiStartIo: UniataRemoveRequest(0, f78f9e34) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan 0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x1:0x0 VendorID+DeviceID/Rev 0x27df8086/0x1 AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf78f9e34 complete with status 0xa AtapiStartIo: UniataRemoveRequest(0, f78f9e34) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan 0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x0:0x1 VendorID+DeviceID/Rev 0x27df8086/0x1 AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf78f9e34 complete with status 0xa AtapiStartIo: UniataRemoveRequest(0, f78f9e34) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan 0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request ScsiPortInitialize Status 0x0 Parameter IgnoreNativePci Parameter IgnoreNativePci = 0x0 Try init 8086 27c0 (/srv/buildbot_cmake/full_cmake/build/hal/halx86/legacy/bussupp.c:1152) Slot assignment for 5 on bus 0 (/srv/buildbot_cmake/full_cmake/build/hal/halx86/legacy/bus/pcibus.c:719) WARNING: PCI Slot Resource Assignment is FOOBAR UniataFindBusMasterController: Context=1, BMListLen=2 ConfigInfo->Length 8c bm_offset 0, channel 0 AdapterInterfaceType=0x5 IoBusNumber=0x0 slotNumber=0x5f busDataRead DevId = 27C08086 Class = 0001/0001 Storage Class UniataChipDetect: HwFlags: 0x0 Parameter ForceSimplex Parameter ForceSimplex = 0x0 i: 0x28 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 i: 0x19 HwFlags: 0x10001000 Parameter HwFlagsOverride Parameter HwFlagsOverride = 0x10001000 HwFlagsOverride: 0x10001000 Parameter HwFlagsAdd Parameter HwFlagsAdd = 0x0 HwFlagsAdd: 0x0 HwFlags (final): 0x10001000 MaxTransferMode: 0x48 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 UniataChipDetectChannels: Parameter IgnoreAhciPM Parameter IgnoreAhciPM = 0x1 SATA/AHCI w/o PM, max luns 1 or 2 allocate 2 Luns for 2 channels Intel chip config: 0 AtapiGetIoRange: AtapiGetIoRange: rid 0x5, start 0x0, offs 0x0, len 0x10, mem 0x0 AtapiGetIoRange: (2) 0x0 other Intel other Intel ForceSimplex = 0 HwFlags = 10001000 (0)HwFlags = 10001000 (1)HwFlags = 10001000 (2)found suitable device HwFlags = 10001000 (3)Range 0 = 0xcc01 Range 1 = 0xc881 Range 2 = 0xc801 Range 3 = 0xc481 Range 4 = 0xc401 IsBusMaster == TRUE AtapiGetIoRange: AtapiGetIoRange: rid 0x4, start 0xc400, offs 0x0, len 0x10, mem 0x0 AtapiGetIoRange: (2) 0xc400 BusMasterAddress (base): 0xc400 IsBusMaster == TRUE && !MasterDev BM statusByte = 20 AtapiReadChipConfig: devExt 0xb71602b4 AtapiReadChipConfig: dev 0x1, ph chan -1 Parameter ForceSimplex Parameter ForceSimplex = 0x0 MaxTransferMode (base): 0x48 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 Parameter AtapiDmaZeroTransfer Parameter AtapiDmaZeroTransfer = 0x0 Parameter AtapiDmaControlCmd Parameter AtapiDmaControlCmd = 0x0 Parameter AtapiDmaRawRead Parameter AtapiDmaRawRead = 0x1 Parameter AtapiDmaReadWrite Parameter AtapiDmaReadWrite = 0x1 AtapiChipInit: dev 0x1, ph chan -2, c -1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA Base init simplexOnly = 0 (2)!MasterDev update ConfigInfo->nt4 using AtaReq sz 1000 update ConfigInfo->w2k: 64bit 0 chan[0] InterruptMode: 0, Level 5, Level2 0, Vector 5, Vector2 0 Reconstruct ConfigInfo set Dma32BitAddresses BMList[i].channel 0x0, NumberChannels 0x2, channel 0x0 de 0xb71602b4, Channel 0x0 chan = 0xb71608c8 AtapiSetupLunPtrs for channel 0 of 2, 2 luns Chan 0xb71608c8 Lun 0x0 Lun ptr 0xb6eda000 Lun 0x1 Lun ptr 0xb6eda308 AtapiReadChipConfig: devExt 0xb71602b4 AtapiReadChipConfig: dev 0x1, ph chan 0 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 Parameter ReorderEnable Parameter ReorderEnable = 0x1 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 Getting IO ranges !MasterDev mode IO range 1 0xcc00 IO range 2 0xc882 IDX_IO1 0->cc00(io) IDX_IO2 10->c882(io) IDX_BM_IO 14->c400(io) IDX_SATA_IO 19->0(io) AltStatus (0x50) Reg_0x1 (0xcc01) = 0x0 Reg_0x2 (0xcc02) = 0x0 Reg_0x3 (0xcc03) = 0x0 Reg_0x4 (0xcc04) = 0x0 Reg_0x5 (0xcc05) = 0x0 Reg_0x6 (0xcc06) = 0xe0 Reg_0x7 (0xcc07) = 0x50 BM_0x0 (0xc400) = 0x0 BM_0x1 (0xc401) = 0x0 BM_0x2 (0xc402) = 0x20 BM_0x3 (0xc403) = 0x0 clean IDE intr 0 clean IDE intr 1 DMA status 0x20 AtapiDmaAlloc: allocate tmp buffers below 4Gb de 0xb71602b4, Channel 0x1 chan = 0xb7160b30 AtapiSetupLunPtrs for channel 1 of 2, 2 luns Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 Lun 0x1 Lun ptr 0xb6eda918 AtapiReadChipConfig: devExt 0xb71602b4 AtapiReadChipConfig: dev 0x1, ph chan 1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 Parameter ReorderEnable Parameter ReorderEnable = 0x1 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 Getting IO ranges !MasterDev mode IO range 1 0xc800 IO range 2 0xc482 IDX_IO1 0->c800(io) IDX_IO2 10->c482(io) IDX_BM_IO 14->c408(io) IDX_SATA_IO 19->0(io) AltStatus (0x50) Reg_0x1 (0xc801) = 0x0 Reg_0x2 (0xc802) = 0x3 Reg_0x3 (0xc803) = 0x0 Reg_0x4 (0xc804) = 0x0 Reg_0x5 (0xc805) = 0x8 Reg_0x6 (0xc806) = 0xb0 Reg_0x7 (0xc807) = 0x50 BM_0x0 (0xc408) = 0x0 BM_0x1 (0xc409) = 0x0 BM_0x2 (0xc40a) = 0x60 BM_0x3 (0xc40b) = 0x0 clean IDE intr 0 clean IDE intr 1 DMA status 0x60 AtapiDmaAlloc: allocate tmp buffers below 4Gb exit: init spinlock MasterDev=0x0, NumberChannels=0x2, Isr2DevObj=0x0 Init ISR: Multichannel native mode, go... Create DO DO name: len(38, 38), \Device\uniata1_2ch HalGetInterruptVector OrigAdapterInterfaceType=5 SystemIoBusNumber=0 BusInterruptLevel=5 BusInterruptVector=5 isr2_de 0xb71729d0 isr2_vector 0x35 isr2_irql 0x16 isr2_affinity 0x1 IoConnectInterrupt MasterDev=0x0, NumberChannels=0x2, Isr2DevObj=0xb7172918 final chan[2] InterruptMode: 0, Level 5, Level2 0, Vector 5, Vector2 0 return SP_RETURN_FOUND AtapiHwInitialize: (base) AtapiChipInit: dev 0xffffffff, ph chan -1, c -1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA Base init AtapiChipInit: dev 0xffffffff, ph chan 0, c 0 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 0 other Intel FindDevices: AtapiDisableInterrupts_0: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x20 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223218672 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=ffffffff tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x24 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x0 FindDevices: select 0 dev on exit AtapiEnableInterrupts_0: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x0, dev 0 AtapiDisableInterrupts_0: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223218672 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 49 AtaSetTransferMode: Set 0x48 on Device 0/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_0: 1 AtapiHwInitialize: lChannel 0x0, dev 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x60 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223218672 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=ffffffff tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x60 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223218672 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223218672 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: ATAPI/Changer branch try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: (base) done AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x50 base status 0x50 Unexpected interrupt. OurInterrupt = 0 AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x64 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... IDE status 0x50 base status 0x50 Unexpected interrupt. OurInterrupt = 2 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78f9e34, CDB 0xf78f9e64, AtaReq 0xb6e89000, SCmd 0x12 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf78f9e34 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78f9b30 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_INQUIRY PATH:LUN:TID = 0x0:0x0:0x0 IdeSendCommand: SCSIOP_INQUIRY ok HDD at home RelativeAddressing IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf78f9e34 complete with status 0x1 AtapiStartIo: AtapiDmaDBSync(b71608c8, f78f9e34) AtapiStartIo: UniataRemoveRequest(b71608c8, f78f9e34) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71608c8, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x1:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf78f9e34 complete with status 0xa AtapiStartIo: UniataRemoveRequest(0, f78f9e34) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan 0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf78f9e34 TopLevel (3), AtaReq 0xb6e89000 HDD at home CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x0 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf78f9e34 complete with status 0xa AtapiStartIo: AtapiDmaDBSync(b71608c8, f78f9e34) AtapiStartIo: UniataRemoveRequest(b71608c8, f78f9e34) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71608c8, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78f9e34, CDB 0xf78f9e64, AtaReq 0xb6e89000, SCmd 0x12 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf78f9e34 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78f9b30 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_INQUIRY PATH:LUN:TID = 0x1:0x0:0x0 IdeSendCommand: SCSIOP_INQUIRY ok HDD at home RelativeAddressing IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf78f9e34 complete with status 0x1 AtapiStartIo: AtapiDmaDBSync(b7160b30, f78f9e34) AtapiStartIo: UniataRemoveRequest(b7160b30, f78f9e34) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b7160b30, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x1:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf78f9e34 complete with status 0xa AtapiStartIo: UniataRemoveRequest(0, f78f9e34) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan 0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78f9e34, CDB 0xf78f9e64, AtaReq 0xb6e89000, SCmd 0x12 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf78f9e34 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 12 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: BuildMechanismStatusSrb() MechanismStatusSrb 0xb7160b6c AtapiSendCommand: AtapiSendCommand recursive AtapiSendCommand: req state 0x20, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb b7160b9c) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data b7160b4c, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=b7160b4c) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b7160b9c Command 0xbd to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiSendCommand: SRB_STATUS_PENDING (2) AtapiStartIo: next Srb f78f9e34 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xb7160b6c, chan 0xb7160b30 restore original SRB 0xf78f9e34 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78f9e34, CDB 0xf78f9e64, AtaReq 0xb6e89000, SCmd 0x12 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf78f9e34 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 12 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 12 (Cdb f78f9e64) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788ef80, count 24, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788ef80) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 12 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78f9e64 Command 0x12 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78f9e34 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = TRUE perform generic check getting status... ATAPI status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:1, irql 0x16, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 42 AtapiInterrupt: ATAPI Entered with status (0x50) AtapiInterrupt: iReason 3 AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 3 AtapiInterrupt: i-reason=3, status=0x50 AtapiInterrupt: interruptReason = CompleteRequest AtapiInterrupt: CompleteRequest, was DmaTransfer AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 24, full size 24 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xf78f9e34, status 1 AtapiInterrupt: RequestComplete, srb 0xf78f9e34 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x1:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf78f9e34 complete with status 0xa AtapiStartIo: UniataRemoveRequest(0, f78f9e34) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan 0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 AtapiStartIo: Communication port INQUIRY AtapiStartIo: Srb 0xf78f9e34 complete with status 0x1 AtapiStartIo: UniataRemoveRequest(0, f78f9e34) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan 0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x1:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf78f9e34 complete with status 0xa AtapiStartIo: UniataRemoveRequest(0, f78f9e34) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan 0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf78f9e34 complete with status 0xa AtapiStartIo: UniataRemoveRequest(0, f78f9e34) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan 0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request ScsiPortInitialize Status 0x0 Parameter IgnoreIsa Parameter IgnoreIsa = 0x0 ATAPI IDE: Look for ISA Controllers AtapiFindController: assume max PIO4 allocate 2 Luns for 1 channels AtapiSetupLunPtrs for channel 0 of 1, 2 luns Chan 0xb6e87008 Lun 0x0 Lun ptr 0xb715b008 Lun 0x1 Lun ptr 0xb715b310 AtapiReadChipConfig: devExt 0xb6e887f4 AtapiReadChipConfig: dev 0xffffffff, ph chan -1 Parameter ForceSimplex Parameter ForceSimplex = 0x0 MaxTransferMode (base): 0xc Parameter MaxTransferMode Parameter MaxTransferMode = 0xc MaxTransferMode (overriden): 0xc Parameter AtapiDmaZeroTransfer Parameter AtapiDmaZeroTransfer = 0x0 Parameter AtapiDmaControlCmd Parameter AtapiDmaControlCmd = 0x0 Parameter AtapiDmaRawRead Parameter AtapiDmaRawRead = 0x1 Parameter AtapiDmaReadWrite Parameter AtapiDmaReadWrite = 0x1 AtapiChipInit: dev 0xffffffff, ph chan -1, c -1 HwFlags: 0x0 VendorID/DeviceID/Rev 0x0/0x0/0x0 Parameter PortBase Parameter PortBase = 0x0 Parameter Irq Parameter Irq = 0x0 BaseIoAddress1=1f0 BaseIoAddress2=3f6 AltStatus (0xff) Reg_0x1 (0x1f1) = 0xff Reg_0x2 (0x1f2) = 0xff Reg_0x3 (0x1f3) = 0xff Reg_0x4 (0x1f4) = 0xff Reg_0x5 (0x1f5) = 0xff Reg_0x6 (0x1f6) = 0xff Reg_0x7 (0x1f7) = 0xff BM_0x0 (0x0) = 0x0 BM_0x1 (0x0) = 0x0 BM_0x2 (0x0) = 0x0 BM_0x3 (0x0) = 0x0 AtapiFindController: Identifier read back from Master (0xff) AtapiFindController: Identifier read back from Slave (0xff) Parameter PortBase Parameter PortBase = 0x0 Parameter Irq Parameter Irq = 0x0 BaseIoAddress1=170 BaseIoAddress2=376 AltStatus (0xff) Reg_0x1 (0x171) = 0xff Reg_0x2 (0x172) = 0xff Reg_0x3 (0x173) = 0xff Reg_0x4 (0x174) = 0xff Reg_0x5 (0x175) = 0xff Reg_0x6 (0x176) = 0xff Reg_0x7 (0x177) = 0xff BM_0x0 (0x0) = 0x0 BM_0x1 (0x0) = 0x0 BM_0x2 (0x0) = 0x0 BM_0x3 (0x0) = 0x0 AtapiFindController: Identifier read back from Master (0xff) AtapiFindController: Identifier read back from Slave (0xff) Parameter PortBase Parameter PortBase = 0x0 Parameter Irq Parameter Irq = 0x0 BaseIoAddress1=1e8 BaseIoAddress2=3ee AltStatus (0xff) Reg_0x1 (0x1e9) = 0xff Reg_0x2 (0x1ea) = 0xff Reg_0x3 (0x1eb) = 0xff Reg_0x4 (0x1ec) = 0xff Reg_0x5 (0x1ed) = 0xff Reg_0x6 (0x1ee) = 0xff Reg_0x7 (0x1ef) = 0xff BM_0x0 (0x0) = 0x0 BM_0x1 (0x0) = 0x0 BM_0x2 (0x0) = 0x0 BM_0x3 (0x0) = 0x0 AtapiFindController: Identifier read back from Master (0xff) AtapiFindController: Identifier read back from Slave (0xff) Parameter PortBase Parameter PortBase = 0x0 Parameter Irq Parameter Irq = 0x0 BaseIoAddress1=168 BaseIoAddress2=36e AltStatus (0xff) Reg_0x1 (0x169) = 0xff Reg_0x2 (0x16a) = 0xff Reg_0x3 (0x16b) = 0xff Reg_0x4 (0x16c) = 0xff Reg_0x5 (0x16d) = 0xff Reg_0x6 (0x16e) = 0xff Reg_0x7 (0x16f) = 0xff BM_0x0 (0x0) = 0x0 BM_0x1 (0x0) = 0x0 BM_0x2 (0x0) = 0x0 BM_0x3 (0x0) = 0x0 AtapiFindController: Identifier read back from Master (0xff) AtapiFindController: Identifier read back from Slave (0xff) AtapiFindController: return SP_RETURN_NOT_FOUND ScsiPortInitialize Status 0xc00000c0 Parameter IgnoreMca Parameter IgnoreMca = 0x0 ATAPI IDE: Look for MCA Controllers ScsiPortInitialize Status 0xc00000c0 Leave UNIATA MiniPort DriverEntry with status 0x0 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:1575) '\Driver\BUSLOGIC' initialization failed, status (0xc00000c0) (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:61) Deleting driver object '\Driver\BUSLOGIC' TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa348, CDB 0xf78fa378, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78fa348 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f78fa378) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa378 Command 0x25 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa348 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa348, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 1) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa348, CDB 0xf78fa378, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78fa348 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f78fa378) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa378 Command 0x25 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa348 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa348, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa348, CDB 0xf78fa378, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78fa348 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f78fa378) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa378 Command 0x25 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa348 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa348, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa348, CDB 0xf78fa378, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78fa348 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f78fa378) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa378 Command 0x25 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa348 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa348, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa348, CDB 0xf78fa378, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78fa348 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f78fa378) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa378 Command 0x25 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa348 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa348, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa348, CDB 0xf78fa378, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78fa348 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f78fa378) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa378 Command 0x25 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa348 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa348, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa348, CDB 0xf78fa378, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78fa348 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f78fa378) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa378 Command 0x25 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa348 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa348, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa348, CDB 0xf78fa378, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78fa348 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f78fa378) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa378 Command 0x25 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa348 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa348, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa348, CDB 0xf78fa378, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78fa348 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f78fa378) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa378 Command 0x25 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa348 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa348, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa348, CDB 0xf78fa378, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78fa348 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f78fa378) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa378 Command 0x25 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa348 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa348, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa348, CDB 0xf78fa378, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78fa348 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f78fa378) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa378 Command 0x25 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa348 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa348, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa348, CDB 0xf78fa378, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78fa348 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f78fa378) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa378 Command 0x25 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa348 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa348, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa348, CDB 0xf78fa378, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78fa348 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f78fa378) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa378 Command 0x25 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa348 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa348, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa348, CDB 0xf78fa378, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78fa348 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f78fa378) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa378 Command 0x25 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa348 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa348, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa348, CDB 0xf78fa378, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78fa348 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f78fa378) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa378 Command 0x25 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa348 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa348, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa348, CDB 0xf78fa378, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78fa348 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f78fa378) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa378 Command 0x25 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa348 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa348, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa34c, CDB 0xf78fa37c, AtaReq 0xb6e89000, SCmd 0xbd UniataNeedQueueing: TopLevel, qd=0 Send to device bd TopLevel (2), srb 0xf78fa34c TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send bd AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f78fa37c) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa37c Command 0xbd to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa34c AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa34c, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa34c, CDB 0xf78fa37c, AtaReq 0xb6e89000, SCmd 0xbd UniataNeedQueueing: TopLevel, qd=0 Send to device bd TopLevel (2), srb 0xf78fa34c TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send bd AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f78fa37c) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa37c Command 0xbd to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa34c AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa34c, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa34c, CDB 0xf78fa37c, AtaReq 0xb6e89000, SCmd 0xbd UniataNeedQueueing: TopLevel, qd=0 Send to device bd TopLevel (2), srb 0xf78fa34c TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send bd AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f78fa37c) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa37c Command 0xbd to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa34c AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa34c, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa34c, CDB 0xf78fa37c, AtaReq 0xb6e89000, SCmd 0xbd UniataNeedQueueing: TopLevel, qd=0 Send to device bd TopLevel (2), srb 0xf78fa34c TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send bd AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f78fa37c) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa37c Command 0xbd to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa34c AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa34c, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa34c, CDB 0xf78fa37c, AtaReq 0xb6e89000, SCmd 0xbd UniataNeedQueueing: TopLevel, qd=0 Send to device bd TopLevel (2), srb 0xf78fa34c TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send bd AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f78fa37c) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa37c Command 0xbd to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa34c AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa34c, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa34c, CDB 0xf78fa37c, AtaReq 0xb6e89000, SCmd 0xbd UniataNeedQueueing: TopLevel, qd=0 Send to device bd TopLevel (2), srb 0xf78fa34c TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send bd AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f78fa37c) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa37c Command 0xbd to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa34c AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa34c, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa34c, CDB 0xf78fa37c, AtaReq 0xb6e89000, SCmd 0xbd UniataNeedQueueing: TopLevel, qd=0 Send to device bd TopLevel (2), srb 0xf78fa34c TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send bd AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f78fa37c) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa37c Command 0xbd to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa34c AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa34c, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa34c, CDB 0xf78fa37c, AtaReq 0xb6e89000, SCmd 0xbd UniataNeedQueueing: TopLevel, qd=0 Send to device bd TopLevel (2), srb 0xf78fa34c TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send bd AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f78fa37c) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa37c Command 0xbd to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa34c AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa34c, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa34c, CDB 0xf78fa37c, AtaReq 0xb6e89000, SCmd 0xbd UniataNeedQueueing: TopLevel, qd=0 Send to device bd TopLevel (2), srb 0xf78fa34c TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send bd AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f78fa37c) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa37c Command 0xbd to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa34c AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa34c, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa34c, CDB 0xf78fa37c, AtaReq 0xb6e89000, SCmd 0xbd UniataNeedQueueing: TopLevel, qd=0 Send to device bd TopLevel (2), srb 0xf78fa34c TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send bd AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f78fa37c) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa37c Command 0xbd to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa34c AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa34c, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa34c, CDB 0xf78fa37c, AtaReq 0xb6e89000, SCmd 0xbd UniataNeedQueueing: TopLevel, qd=0 Send to device bd TopLevel (2), srb 0xf78fa34c TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send bd AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f78fa37c) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa37c Command 0xbd to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa34c AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa34c, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa34c, CDB 0xf78fa37c, AtaReq 0xb6e89000, SCmd 0xbd UniataNeedQueueing: TopLevel, qd=0 Send to device bd TopLevel (2), srb 0xf78fa34c TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send bd AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f78fa37c) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa37c Command 0xbd to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa34c AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa34c, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa34c, CDB 0xf78fa37c, AtaReq 0xb6e89000, SCmd 0xbd UniataNeedQueueing: TopLevel, qd=0 Send to device bd TopLevel (2), srb 0xf78fa34c TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send bd AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f78fa37c) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa37c Command 0xbd to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa34c AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa34c, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa34c, CDB 0xf78fa37c, AtaReq 0xb6e89000, SCmd 0xbd UniataNeedQueueing: TopLevel, qd=0 Send to device bd TopLevel (2), srb 0xf78fa34c TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send bd AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f78fa37c) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa37c Command 0xbd to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa34c AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa34c, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa34c, CDB 0xf78fa37c, AtaReq 0xb6e89000, SCmd 0xbd UniataNeedQueueing: TopLevel, qd=0 Send to device bd TopLevel (2), srb 0xf78fa34c TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send bd AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f78fa37c) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa37c Command 0xbd to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa34c AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa34c, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa34c, CDB 0xf78fa37c, AtaReq 0xb6e89000, SCmd 0xbd UniataNeedQueueing: TopLevel, qd=0 Send to device bd TopLevel (2), srb 0xf78fa34c TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send bd AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f78fa37c) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa37c Command 0xbd to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa34c AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa34c, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 1a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 14, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 1a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x1a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 1a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 14, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 1a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x1a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 1a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 14, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 1a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x1a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 1a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 14, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 1a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x1a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 1a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 14, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 1a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x1a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 1a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 14, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 1a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x1a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 1a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 14, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 1a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x1a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 1a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 14, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 1a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x1a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 1a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 14, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 1a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x1a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 1a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 14, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 1a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x1a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 1a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 14, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 1a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x1a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 1a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 14, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 1a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x1a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 1a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 14, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 1a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x1a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 1a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 14, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 1a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x1a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 1a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 14, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 1a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x1a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 1a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 14, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 1a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x1a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x5a UniataNeedQueueing: TopLevel, qd=0 Send to device 5a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 5a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 18, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 5a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x5a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x5a UniataNeedQueueing: TopLevel, qd=0 Send to device 5a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 5a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 18, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 5a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x5a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x5a UniataNeedQueueing: TopLevel, qd=0 Send to device 5a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 5a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 18, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 5a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x5a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x5a UniataNeedQueueing: TopLevel, qd=0 Send to device 5a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 5a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 18, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 5a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x5a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x5a UniataNeedQueueing: TopLevel, qd=0 Send to device 5a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 5a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 18, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 5a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x5a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x5a UniataNeedQueueing: TopLevel, qd=0 Send to device 5a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 5a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 18, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 5a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x5a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x5a UniataNeedQueueing: TopLevel, qd=0 Send to device 5a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 5a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 18, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 5a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x5a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x5a UniataNeedQueueing: TopLevel, qd=0 Send to device 5a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 5a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 18, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 5a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x5a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x5a UniataNeedQueueing: TopLevel, qd=0 Send to device 5a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 5a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 18, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 5a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x5a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x5a UniataNeedQueueing: TopLevel, qd=0 Send to device 5a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 5a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 18, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 5a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x5a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x5a UniataNeedQueueing: TopLevel, qd=0 Send to device 5a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 5a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 18, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 5a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x5a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x5a UniataNeedQueueing: TopLevel, qd=0 Send to device 5a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 5a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 18, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 5a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x5a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x5a UniataNeedQueueing: TopLevel, qd=0 Send to device 5a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 5a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 18, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 5a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x5a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x5a UniataNeedQueueing: TopLevel, qd=0 Send to device 5a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 5a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 18, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 5a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x5a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x5a UniataNeedQueueing: TopLevel, qd=0 Send to device 5a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 5a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 18, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 5a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x5a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x5a UniataNeedQueueing: TopLevel, qd=0 Send to device 5a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 5a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 18, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 5a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x5a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa284, CDB 0xf78fa2b4, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa284 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809966f4 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_MODE_SENSE PATH:LUN:TID = 0x0:0x0:0x0 IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf78fa284 complete with status 0x6 AtapiStartIo: AtapiDmaDBSync(b71608c8, f78fa284) AtapiStartIo: UniataRemoveRequest(b71608c8, f78fa284) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71608c8, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa284, CDB 0xf78fa2b4, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa284 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78f9f50 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_MODE_SENSE PATH:LUN:TID = 0x0:0x0:0x0 IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf78fa284 complete with status 0x6 AtapiStartIo: AtapiDmaDBSync(b71608c8, f78fa284) AtapiStartIo: UniataRemoveRequest(b71608c8, f78fa284) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71608c8, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa2a8, CDB 0xf78fa2d8, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78fa2a8 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78f9f70 ** Ide: Command AtaReq 0xb6e89000 ** --- ** ** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x0:0x0:0x0 ** IDE disk 0x0 - #sectors 0x3f, #heads 0xff, #cylinders 0xed81 IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf78fa2a8 complete with status 0x1 AtapiStartIo: AtapiDmaDBSync(b71608c8, f78fa2a8) AtapiStartIo: UniataRemoveRequest(b71608c8, f78fa2a8) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71608c8, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e87250, CDB 0xb6e87280, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e87250 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78f9e08 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtapiDmaSetup: mode 0x48, data f788e000, count 200, lCh 0, dev 0 get Phys(PRD=b6e89058) get Phys(data[0]=f788e000) set TERM AtapiDmaSetup: OK IdeReadWrite: Lba 0x0, Count 0x1(0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0 Status 0x0 AtapiDmaStart: read on 0x0:0x0 IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b6e87250 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 1) AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE perform generic check getting status... IDE status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:0, irql 0x16, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 AtapiInterrupt: Entered with status (0x50) AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb6e87250, status 1 AtapiInterrupt: RequestComplete, srb 0xb6e87250 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e87250, CDB 0xb6e87280, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e87250 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78f9cf8 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtapiDmaSetup: mode 0x48, data f788e000, count 200, lCh 0, dev 0 get Phys(PRD=b6e89058) get Phys(data[0]=f788e000) set TERM AtapiDmaSetup: OK IdeReadWrite: Lba 0x0, Count 0x1(0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0 Status 0x0 AtapiDmaStart: read on 0x0:0x0 IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b6e87250 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 2) AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE perform generic check getting status... IDE status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:0, irql 0x16, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 AtapiInterrupt: Entered with status (0x50) AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb6e87250, status 1 AtapiInterrupt: RequestComplete, srb 0xb6e87250 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78f9ed8, CDB 0xf78f9f08, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78f9ed8 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78f9ba0 ** Ide: Command AtaReq 0xb6e89000 ** --- ** ** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x0:0x0:0x0 ** IDE disk 0x0 - #sectors 0x3f, #heads 0xff, #cylinders 0xed81 IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf78f9ed8 complete with status 0x1 AtapiStartIo: AtapiDmaDBSync(b71608c8, f78f9ed8) AtapiStartIo: UniataRemoveRequest(b71608c8, f78f9ed8) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71608c8, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e87250, CDB 0xb6e87280, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e87250 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78f9d68 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtapiDmaSetup: mode 0x48, data f788e9e8, count 200, lCh 0, dev 0 get Phys(PRD=b6e89058) get Phys(data[0]=f788e9e8) set TERM AtapiDmaSetup: OK IdeReadWrite: Lba 0x0, Count 0x1(0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0 Status 0x0 AtapiDmaStart: read on 0x0:0x0 IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b6e87250 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 2) AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE perform generic check getting status... IDE status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:0, irql 0x16, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 AtapiInterrupt: Entered with status (0x50) AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb6e87250, status 1 AtapiInterrupt: RequestComplete, srb 0xb6e87250 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e87250, CDB 0xb6e87280, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e87250 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78f9d80 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtapiDmaSetup: mode 0x48, data f788e000, count 200, lCh 0, dev 0 get Phys(PRD=b6e89058) get Phys(data[0]=f788e000) set TERM AtapiDmaSetup: OK IdeReadWrite: Lba 0x0, Count 0x1(0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0 Status 0x0 AtapiDmaStart: read on 0x0:0x0 IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b6e87250 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 2) AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE perform generic check getting status... IDE status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:0, irql 0x16, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 AtapiInterrupt: Entered with status (0x50) AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb6e87250, status 1 AtapiInterrupt: RequestComplete, srb 0xb6e87250 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa284, CDB 0xf78fa2b4, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa284 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78f9f50 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_MODE_SENSE PATH:LUN:TID = 0x1:0x0:0x0 IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf78fa284 complete with status 0x6 AtapiStartIo: AtapiDmaDBSync(b7160b30, f78fa284) AtapiStartIo: UniataRemoveRequest(b7160b30, f78fa284) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b7160b30, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa284, CDB 0xf78fa2b4, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa284 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78f9f50 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_MODE_SENSE PATH:LUN:TID = 0x1:0x0:0x0 IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf78fa284 complete with status 0x6 AtapiStartIo: AtapiDmaDBSync(b7160b30, f78fa284) AtapiStartIo: UniataRemoveRequest(b7160b30, f78fa284) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b7160b30, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa2a8, CDB 0xf78fa2d8, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78fa2a8 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78f9f70 ** Ide: Command AtaReq 0xb6e89000 ** --- ** ** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x1:0x0:0x0 ** IDE disk 0x0 - #sectors 0x3f, #heads 0xff, #cylinders 0xed81 IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf78fa2a8 complete with status 0x1 AtapiStartIo: AtapiDmaDBSync(b7160b30, f78fa2a8) AtapiStartIo: UniataRemoveRequest(b7160b30, f78fa2a8) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b7160b30, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e87da8, CDB 0xb6e87dd8, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e87da8 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78f9e08 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtapiDmaSetup: mode 0x48, data f788e000, count 200, lCh 1, dev 0 get Phys(PRD=b6e89058) get Phys(data[0]=f788e000) set TERM AtapiDmaSetup: OK IdeReadWrite: Lba 0x0, Count 0x1(0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0 Status 0x0 AtapiDmaStart: read on 0x1:0x0 IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b6e87da8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = TRUE perform generic check getting status... ATAPI status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:1, irql 0x16, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 AtapiInterrupt: Entered with status (0x50) AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb6e87da8, status 1 AtapiInterrupt: RequestComplete, srb 0xb6e87da8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e87da8, CDB 0xb6e87dd8, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e87da8 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78f9cf8 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtapiDmaSetup: mode 0x48, data f788e000, count 200, lCh 1, dev 0 get Phys(PRD=b6e89058) get Phys(data[0]=f788e000) set TERM AtapiDmaSetup: OK IdeReadWrite: Lba 0x0, Count 0x1(0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0 Status 0x0 AtapiDmaStart: read on 0x1:0x0 IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b6e87da8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = TRUE perform generic check getting status... ATAPI status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:1, irql 0x16, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 AtapiInterrupt: Entered with status (0x50) AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb6e87da8, status 1 AtapiInterrupt: RequestComplete, srb 0xb6e87da8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78f9ed8, CDB 0xf78f9f08, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78f9ed8 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78f9ba0 ** Ide: Command AtaReq 0xb6e89000 ** --- ** ** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x1:0x0:0x0 ** IDE disk 0x0 - #sectors 0x3f, #heads 0xff, #cylinders 0xed81 IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf78f9ed8 complete with status 0x1 AtapiStartIo: AtapiDmaDBSync(b7160b30, f78f9ed8) AtapiStartIo: UniataRemoveRequest(b7160b30, f78f9ed8) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b7160b30, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e87da8, CDB 0xb6e87dd8, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e87da8 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78f9d68 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtapiDmaSetup: mode 0x48, data f788e2f8, count 200, lCh 1, dev 0 get Phys(PRD=b6e89058) get Phys(data[0]=f788e2f8) set TERM AtapiDmaSetup: OK IdeReadWrite: Lba 0x0, Count 0x1(0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0 Status 0x0 AtapiDmaStart: read on 0x1:0x0 IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b6e87da8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = TRUE perform generic check getting status... ATAPI status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:1, irql 0x16, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 AtapiInterrupt: Entered with status (0x50) AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb6e87da8, status 1 AtapiInterrupt: RequestComplete, srb 0xb6e87da8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e87da8, CDB 0xb6e87dd8, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e87da8 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78f9d80 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtapiDmaSetup: mode 0x48, data f788e000, count 200, lCh 1, dev 0 get Phys(PRD=b6e89058) get Phys(data[0]=f788e000) set TERM AtapiDmaSetup: OK IdeReadWrite: Lba 0x0, Count 0x1(0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0 Status 0x0 AtapiDmaStart: read on 0x1:0x0 IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b6e87da8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = TRUE perform generic check getting status... ATAPI status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:1, irql 0x16, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 AtapiInterrupt: Entered with status (0x50) AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb6e87da8, status 1 AtapiInterrupt: RequestComplete, srb 0xb6e87da8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:61) Deleting driver object '\Driver\CDFS' (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'pci' for critical device '*PNP0A03' (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/hal/halx86/legacy/halpnpdd.c:716) Start device received (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/fdo.c:571) Unknown IOCTL 0x9 (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/fdo.c:571) Unknown IOCTL 0x14 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'pci' for critical device 'PCI#CC_0604' (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'pci' for critical device 'PCI#CC_0604' (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'pci' for critical device 'PCI#CC_0604' (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbuhci' for critical device 'PCI#CC_0C0300' (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbuhci' for critical device 'PCI#CC_0C0300' (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbuhci' for critical device 'PCI#CC_0C0300' (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbuhci' for critical device 'PCI#CC_0C0300' (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbehci' for critical device 'PCI#CC_0C0320' (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'pci' for critical device 'PCI#CC_0604' (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/pdo.c:1267) Enabling command flags for PCI device 0x1 on bus 0x0: None (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/fdo.c:571) Unknown IOCTL 0x9 (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/fdo.c:571) Unknown IOCTL 0x14 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'VBE' for critical device 'PCI#CC_0300' (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/mm/ARM3/sysldr.c:2959) ZwOpenFile failed with status 0xc000003a (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/mm/ARM3/sysldr.c:2959) ZwOpenFile failed with status 0xc000003a (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/pdo.c:1267) Enabling command flags for PCI device 0x1c on bus 0x0: None (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/fdo.c:571) Unknown IOCTL 0x9 (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/fdo.c:571) Unknown IOCTL 0x14 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/pdo.c:1267) Enabling command flags for PCI device 0x3c on bus 0x0: None (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/fdo.c:571) Unknown IOCTL 0x9 (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/fdo.c:571) Unknown IOCTL 0x14 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/libusb.cpp:31) EHCI_AddDevice (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:160) CUSBHardwareDevice::Initialize (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/hal/halx86/legacy/bus/pcibus.c:690) HAL: No PCI Resource Adjustment done! Hardware may malfunction (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/pdo.c:1250) Assigning IRQ 3 to PCI device 0x1d on bus 0x0 (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/pdo.c:1267) Enabling command flags for PCI device 0x1d on bus 0x0: [Bus master] [I/O space enable] (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:246) CUSBHardwareDevice::PnpStart (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:290) UHCI Base 0000B000 Length ffff0020 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:598) [USBUHCI] InitializeController (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:626) [USBUHCI] LEGSUP f00 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:631) [USBUHCI] Acquired ownership (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:634) [USBUHCI] SBRN 10 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:564) Waiting 10 milliseconds for global reset (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:725) Index 0 QueueHead F788C000 LinkPhysical 14e022 ElementPhysical 1 PhysicalAddress 14e000 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:733) Index 1 QueueHead F788C020 LinkPhysical 14e042 ElementPhysical 1 PhysicalAddress 14e020 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:742) Index 2 QueueHead F788C040 LinkPhysical 14e062 ElementPhysical 1 PhysicalAddress 14e040 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:750) Index 3 QueueHead F788C060 LinkPhysical 14e082 ElementPhysical 1 PhysicalAddress 14e060 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:758) Index 4 QueueHead F788C080 LinkPhysical 1 ElementPhysical 1 PhysicalAddress 14e080 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:825) [USBUHCI] Controller initialized (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:374) Starting Controller (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:463) [USBUHCI] USBCMD: 80 USBSTS 20 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:481) [USBUHCI] Status 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:492) [USBUHCI] USBCMD: 81 USBSTS 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:523) [USBUHCI] Controller Started (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:524) [USBUHCI] Controller Status 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:525) [USBUHCI] Controller Cmd Status c1 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:526) [USBUHCI] Controller Interrupt Status d (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:527) [USBUHCI] Controller Frame 37 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:528) [USBUHCI] Controller Port Status 0 80 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:529) [USBUHCI] Controller Port Status 1 80 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:198) CHubController::Initialize (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3840) CHubController::CreatePDO: DeviceName \Device\USBPDO-0 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:556) [USBLIB] Name USB\ROOT_HUB&VID8086&PID27c8&REV0000 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbhub' for critical device 'USB#ROOT_HUB' (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3023) USBHI_QueryDeviceInformation B7150838 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1612) Status 0, Result 0x00000040 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1613) InformationLevel 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1614) ActualLength 40 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1615) PortNumber 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1616) DeviceDescriptor 20000112 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1617) HubAddress 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1618) NumberofPipes 0 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3208) USBHI_GetExtendedHubInformation (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1711) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 2 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3515) USBDI_IsDeviceHighSpeed (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:1152) [UHCI] SetPortFeature PortId 0 Feature 8 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:1152) [UHCI] SetPortFeature PortId 1 Feature 8 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:313) [USBLIB] SCE Request B7175110 TransferBufferLength 8 Flags 3 MDL 00000000 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:324) [USBLIB] Port 0: Status 100, Change 0 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:324) [USBLIB] Port 1: Status 100, Change 0 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/libusb.cpp:31) EHCI_AddDevice (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:160) CUSBHardwareDevice::Initialize (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/hal/halx86/legacy/bus/pcibus.c:690) HAL: No PCI Resource Adjustment done! Hardware may malfunction (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/pdo.c:1250) Assigning IRQ 5 to PCI device 0x3d on bus 0x0 (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/pdo.c:1267) Enabling command flags for PCI device 0x3d on bus 0x0: [Bus master] [I/O space enable] (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:246) CUSBHardwareDevice::PnpStart (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:290) UHCI Base 0000B080 Length ffff0020 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:598) [USBUHCI] InitializeController (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:626) [USBUHCI] LEGSUP f00 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:631) [USBUHCI] Acquired ownership (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:634) [USBUHCI] SBRN 10 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:564) Waiting 10 milliseconds for global reset (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:725) Index 0 QueueHead F7888000 LinkPhysical 152022 ElementPhysical 1 PhysicalAddress 152000 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:733) Index 1 QueueHead F7888020 LinkPhysical 152042 ElementPhysical 1 PhysicalAddress 152020 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:742) Index 2 QueueHead F7888040 LinkPhysical 152062 ElementPhysical 1 PhysicalAddress 152040 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:750) Index 3 QueueHead F7888060 LinkPhysical 152082 ElementPhysical 1 PhysicalAddress 152060 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:758) Index 4 QueueHead F7888080 LinkPhysical 1 ElementPhysical 1 PhysicalAddress 152080 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:825) [USBUHCI] Controller initialized (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:374) Starting Controller (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:463) [USBUHCI] USBCMD: 80 USBSTS 20 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:481) [USBUHCI] Status 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:492) [USBUHCI] USBCMD: 81 USBSTS 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:523) [USBUHCI] Controller Started (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:524) [USBUHCI] Controller Status 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:525) [USBUHCI] Controller Cmd Status c1 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:526) [USBUHCI] Controller Interrupt Status d (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:527) [USBUHCI] Controller Frame 37 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:528) [USBUHCI] Controller Port Status 0 80 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:529) [USBUHCI] Controller Port Status 1 80 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:198) CHubController::Initialize (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3840) CHubController::CreatePDO: DeviceName \Device\USBPDO-1 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:556) [USBLIB] Name USB\ROOT_HUB&VID8086&PID27c9&REV0000 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbhub' for critical device 'USB#ROOT_HUB' (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3023) USBHI_QueryDeviceInformation B6E84DF8 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1612) Status 0, Result 0x00000040 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1613) InformationLevel 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1614) ActualLength 40 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1615) PortNumber 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1616) DeviceDescriptor 20000112 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1617) HubAddress 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1618) NumberofPipes 0 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3208) USBHI_GetExtendedHubInformation (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1711) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 2 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3515) USBDI_IsDeviceHighSpeed (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:1152) [UHCI] SetPortFeature PortId 0 Feature 8 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:1152) [UHCI] SetPortFeature PortId 1 Feature 8 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:313) [USBLIB] SCE Request B6E87808 TransferBufferLength 8 Flags 3 MDL 00000000 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:324) [USBLIB] Port 0: Status 100, Change 0 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:324) [USBLIB] Port 1: Status 100, Change 0 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/libusb.cpp:31) EHCI_AddDevice (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:160) CUSBHardwareDevice::Initialize (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/hal/halx86/legacy/bus/pcibus.c:690) HAL: No PCI Resource Adjustment done! Hardware may malfunction (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/pdo.c:1250) Assigning IRQ 15 to PCI device 0x5d on bus 0x0 (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/pdo.c:1267) Enabling command flags for PCI device 0x5d on bus 0x0: [Bus master] [I/O space enable] (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:246) CUSBHardwareDevice::PnpStart (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:290) UHCI Base 0000B400 Length ffff0020 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:598) [USBUHCI] InitializeController (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:626) [USBUHCI] LEGSUP f00 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:631) [USBUHCI] Acquired ownership (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:634) [USBUHCI] SBRN 10 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:564) Waiting 10 milliseconds for global reset (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:725) Index 0 QueueHead F7884000 LinkPhysical 156022 ElementPhysical 1 PhysicalAddress 156000 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:733) Index 1 QueueHead F7884020 LinkPhysical 156042 ElementPhysical 1 PhysicalAddress 156020 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:742) Index 2 QueueHead F7884040 LinkPhysical 156062 ElementPhysical 1 PhysicalAddress 156040 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:750) Index 3 QueueHead F7884060 LinkPhysical 156082 ElementPhysical 1 PhysicalAddress 156060 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:758) Index 4 QueueHead F7884080 LinkPhysical 1 ElementPhysical 1 PhysicalAddress 156080 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:825) [USBUHCI] Controller initialized (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:374) Starting Controller (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:463) [USBUHCI] USBCMD: 80 USBSTS 20 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:481) [USBUHCI] Status 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:492) [USBUHCI] USBCMD: 81 USBSTS 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:523) [USBUHCI] Controller Started (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:524) [USBUHCI] Controller Status 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:525) [USBUHCI] Controller Cmd Status c1 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:526) [USBUHCI] Controller Interrupt Status d (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:527) [USBUHCI] Controller Frame 37 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:528) [USBUHCI] Controller Port Status 0 80 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:529) [USBUHCI] Controller Port Status 1 80 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:198) CHubController::Initialize (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3840) CHubController::CreatePDO: DeviceName \Device\USBPDO-2 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:556) [USBLIB] Name USB\ROOT_HUB&VID8086&PID27ca&REV0000 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbhub' for critical device 'USB#ROOT_HUB' (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3023) USBHI_QueryDeviceInformation B6E814C8 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1612) Status 0, Result 0x00000040 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1613) InformationLevel 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1614) ActualLength 40 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1615) PortNumber 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1616) DeviceDescriptor 20000112 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1617) HubAddress 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1618) NumberofPipes 0 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3208) USBHI_GetExtendedHubInformation (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1711) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 2 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3515) USBDI_IsDeviceHighSpeed (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:1152) [UHCI] SetPortFeature PortId 0 Feature 8 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:1152) [UHCI] SetPortFeature PortId 1 Feature 8 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:313) [USBLIB] SCE Request B715F820 TransferBufferLength 8 Flags 3 MDL 00000000 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:324) [USBLIB] Port 0: Status 100, Change 0 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:324) [USBLIB] Port 1: Status 100, Change 0 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/libusb.cpp:31) EHCI_AddDevice (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:160) CUSBHardwareDevice::Initialize (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/hal/halx86/legacy/bus/pcibus.c:690) HAL: No PCI Resource Adjustment done! Hardware may malfunction (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/pdo.c:1250) Assigning IRQ 10 to PCI device 0x7d on bus 0x0 (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/pdo.c:1267) Enabling command flags for PCI device 0x7d on bus 0x0: [Bus master] [I/O space enable] (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:246) CUSBHardwareDevice::PnpStart (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:290) UHCI Base 0000B480 Length ffff0020 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:598) [USBUHCI] InitializeController (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:626) [USBUHCI] LEGSUP f00 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:631) [USBUHCI] Acquired ownership (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:634) [USBUHCI] SBRN 10 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:564) Waiting 10 milliseconds for global reset (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:725) Index 0 QueueHead F7880000 LinkPhysical 15a022 ElementPhysical 1 PhysicalAddress 15a000 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:733) Index 1 QueueHead F7880020 LinkPhysical 15a042 ElementPhysical 1 PhysicalAddress 15a020 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:742) Index 2 QueueHead F7880040 LinkPhysical 15a062 ElementPhysical 1 PhysicalAddress 15a040 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:750) Index 3 QueueHead F7880060 LinkPhysical 15a082 ElementPhysical 1 PhysicalAddress 15a060 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:758) Index 4 QueueHead F7880080 LinkPhysical 1 ElementPhysical 1 PhysicalAddress 15a080 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:825) [USBUHCI] Controller initialized (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:374) Starting Controller (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:463) [USBUHCI] USBCMD: 80 USBSTS 20 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:481) [USBUHCI] Status 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:492) [USBUHCI] USBCMD: 81 USBSTS 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:523) [USBUHCI] Controller Started (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:524) [USBUHCI] Controller Status 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:525) [USBUHCI] Controller Cmd Status c1 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:526) [USBUHCI] Controller Interrupt Status d (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:527) [USBUHCI] Controller Frame 37 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:528) [USBUHCI] Controller Port Status 0 80 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:529) [USBUHCI] Controller Port Status 1 80 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:198) CHubController::Initialize (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3840) CHubController::CreatePDO: DeviceName \Device\USBPDO-3 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:556) [USBLIB] Name USB\ROOT_HUB&VID8086&PID27cb&REV0000 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbhub' for critical device 'USB#ROOT_HUB' (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3023) USBHI_QueryDeviceInformation B6E7E130 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1612) Status 0, Result 0x00000040 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1613) InformationLevel 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1614) ActualLength 40 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1615) PortNumber 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1616) DeviceDescriptor 20000112 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1617) HubAddress 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1618) NumberofPipes 0 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3208) USBHI_GetExtendedHubInformation (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1711) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 2 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3515) USBDI_IsDeviceHighSpeed (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:1152) [UHCI] SetPortFeature PortId 0 Feature 8 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:1152) [UHCI] SetPortFeature PortId 1 Feature 8 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:313) [USBLIB] SCE Request B7157158 TransferBufferLength 8 Flags 3 MDL 00000000 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:324) [USBLIB] Port 0: Status 100, Change 0 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:324) [USBLIB] Port 1: Status 100, Change 0 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/libusb.cpp:31) EHCI_AddDevice (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/hal/halx86/legacy/bus/pcibus.c:690) HAL: No PCI Resource Adjustment done! Hardware may malfunction (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/pdo.c:1250) Assigning IRQ 3 to PCI device 0xfd on bus 0x0 (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/pdo.c:1267) Enabling command flags for PCI device 0xfd on bus 0x0: [Bus master] [Memory space enable] (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:359) Controller has 32 Length (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:360) Controller EHCI Version 100 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:361) Controller EHCI Caps HCSParamsLong 104208 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:362) Controller EHCI Caps HCCParamsLong 6871 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:363) Controller has 8 Ports (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:248) Controller Port Routing Rules 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:249) Number of Ports per Companion Controller 2 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:250) Number of Companion Controller 4 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:259) Controller has Debug Port Support At Port 1 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:264) Controller has Extended Capabilities Support (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:279) Controller uses 64-Bit Addressing (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:481) Starting Controller (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:555) [EHCI] Extended Caps Support detected! (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:706) Interrupt Mask 37 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:805) UsbSts c000 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:808) UsbCmd.PeriodicEnable 1 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:809) UsbCmd.AsyncEnable 1 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:810) UsbCmd.IntThreshold 8 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:811) UsbCmd.Run 1 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:812) UsbCmd.FrameListSize 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:819) EHCI Started! (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:198) CHubController::Initialize (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3840) CHubController::CreatePDO: DeviceName \Device\USBPDO-4 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:556) [USBLIB] Name USB\ROOT_HUB20&VID8086&PID27cc&REV0000 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbhub' for critical device 'USB#ROOT_HUB20' (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3023) USBHI_QueryDeviceInformation B6E7D500 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1612) Status 0, Result 0x00000040 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1613) InformationLevel 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1614) ActualLength 40 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1615) PortNumber 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1616) DeviceDescriptor 20000112 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1617) HubAddress 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1618) NumberofPipes 0 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3208) USBHI_GetExtendedHubInformation (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1711) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 8 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3515) USBDI_IsDeviceHighSpeed (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:313) [USBLIB] SCE Request B6F23CD0 TransferBufferLength 32 Flags 3 MDL 00000000 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:324) [USBLIB] Port 0: Status 100, Change 0 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:324) [USBLIB] Port 1: Status 100, Change 0 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:324) [USBLIB] Port 2: Status 100, Change 0 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:324) [USBLIB] Port 3: Status 100, Change 0 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:324) [USBLIB] Port 4: Status 100, Change 0 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:324) [USBLIB] Port 5: Status 100, Change 0 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:324) [USBLIB] Port 6: Status 100, Change 0 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:324) [USBLIB] Port 7: Status 100, Change 0 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/pdo.c:1267) Enabling command flags for PCI device 0x1e on bus 0x0: None (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/fdo.c:571) Unknown IOCTL 0x9 (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/fdo.c:571) Unknown IOCTL 0x14 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/mm/ARM3/sysldr.c:2959) ZwOpenFile failed with status 0xc000003a TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e87250, CDB 0xb6e87280, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e87250 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78fa460 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtapiDmaSetup: mode 0x48, data f7879978, count 200, lCh 0, dev 0 get Phys(PRD=b6e89058) get Phys(data[0]=f7879978) set TERM AtapiDmaSetup: OK IdeReadWrite: Lba 0x0, Count 0x1(0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0 Status 0x0 AtapiDmaStart: read on 0x0:0x0 IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b6e87250 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 2) AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE perform generic check getting status... IDE status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:0, irql 0x16, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 AtapiInterrupt: Entered with status (0x50) AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb6e87250, status 1 AtapiInterrupt: RequestComplete, srb 0xb6e87250 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e87250, CDB 0xb6e87280, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e87250 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78fa338 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtapiDmaSetup: mode 0x48, data f7879000, count 200, lCh 0, dev 0 get Phys(PRD=b6e89058) get Phys(data[0]=f7879000) set TERM AtapiDmaSetup: OK IdeReadWrite: Lba 0x0, Count 0x1(0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0 Status 0x0 AtapiDmaStart: read on 0x0:0x0 IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b6e87250 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 2) AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE perform generic check getting status... IDE status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:0, irql 0x16, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 AtapiInterrupt: Entered with status (0x50) AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb6e87250, status 1 AtapiInterrupt: RequestComplete, srb 0xb6e87250 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e87250, CDB 0xb6e87280, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e87250 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78fa3a8 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtapiDmaSetup: mode 0x48, data f7879008, count 200, lCh 0, dev 0 get Phys(PRD=b6e89058) get Phys(data[0]=f7879008) set TERM AtapiDmaSetup: OK IdeReadWrite: Lba 0x0, Count 0x1(0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0 Status 0x0 AtapiDmaStart: read on 0x0:0x0 IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b6e87250 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 2) AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE perform generic check getting status... IDE status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:0, irql 0x16, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 AtapiInterrupt: Entered with status (0x50) AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb6e87250, status 1 AtapiInterrupt: RequestComplete, srb 0xb6e87250 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e87250, CDB 0xb6e87280, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e87250 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78fa4c0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:1271) EHCI Status = 0xb ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtapiDmaSetup: mode 0x48, data f7879000, count 200, lCh 0, dev 0 get Phys(PRD=b6e89058) get Phys(data[0]=f7879000) set TERM AtapiDmaSetup: OK IdeReadWrite: Lba 0x0, Count 0x1(0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0 Status 0x0 AtapiDmaStart: read on 0x0:0x0 IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b6e87250 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 2) AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE perform generic check getting status... IDE status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:0, irql 0x16, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 AtapiInterrupt: Entered with status (0x50) AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb6e87250, status 1 AtapiInterrupt: RequestComplete, srb 0xb6e87250 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:1317) CStatus b TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e87250, CDB 0xb6e87280, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e87250 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78fa530 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtapiDmaSetup: mode 0x48, data f7879978, count 200, lCh 0, dev 0 get Phys(PRD=b6e89058) get Phys(data[0]=f7879978) set TERM AtapiDmaSetup: OK IdeReadWrite: Lba 0x0, Count 0x1(0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0 Status 0x0 AtapiDmaStart: read on 0x0:0x0 IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b6e87250 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 2) AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE perform generic check getting status... IDE status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:0, irql 0x16, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 AtapiInterrupt: Entered with status (0x50) AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb6e87250, status 1 AtapiInterrupt: RequestComplete, srb 0xb6e87250 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e87da8, CDB 0xb6e87dd8, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e87da8 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78fa460 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtapiDmaSetup: mode 0x48, data f7879978, count 200, lCh 1, dev 0 get Phys(PRD=b6e89058) get Phys(data[0]=f7879978) set TERM AtapiDmaSetup: OK IdeReadWrite: Lba 0x0, Count 0x1(0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0 Status 0x0 AtapiDmaStart: read on 0x1:0x0 IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b6e87da8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = TRUE perform generic check getting status... ATAPI status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:1, irql 0x16, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 AtapiInterrupt: Entered with status (0x50) AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb6e87da8, status 1 AtapiInterrupt: RequestComplete, srb 0xb6e87da8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e87da8, CDB 0xb6e87dd8, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e87da8 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78fa338 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtapiDmaSetup: mode 0x48, data f7879000, count 200, lCh 1, dev 0 get Phys(PRD=b6e89058) get Phys(data[0]=f7879000) set TERM AtapiDmaSetup: OK IdeReadWrite: Lba 0x0, Count 0x1(0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0 Status 0x0 AtapiDmaStart: read on 0x1:0x0 IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b6e87da8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = TRUE perform generic check getting status... ATAPI status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:1, irql 0x16, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 AtapiInterrupt: Entered with status (0x50) AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb6e87da8, status 1 AtapiInterrupt: RequestComplete, srb 0xb6e87da8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e87da8, CDB 0xb6e87dd8, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e87da8 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78fa3a8 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtapiDmaSetup: mode 0x48, data f7879008, count 200, lCh 1, dev 0 get Phys(PRD=b6e89058) get Phys(data[0]=f7879008) set TERM AtapiDmaSetup: OK IdeReadWrite: Lba 0x0, Count 0x1(0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0 Status 0x0 AtapiDmaStart: read on 0x1:0x0 IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b6e87da8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = TRUE perform generic check getting status... ATAPI status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:1, irql 0x16, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 AtapiInterrupt: Entered with status (0x50) AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb6e87da8, status 1 AtapiInterrupt: RequestComplete, srb 0xb6e87da8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e87da8, CDB 0xb6e87dd8, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e87da8 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78fa4c0 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtapiDmaSetup: mode 0x48, data f7879000, count 200, lCh 1, dev 0 get Phys(PRD=b6e89058) get Phys(data[0]=f7879000) set TERM AtapiDmaSetup: OK IdeReadWrite: Lba 0x0, Count 0x1(0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0 Status 0x0 AtapiDmaStart: read on 0x1:0x0 IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b6e87da8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = TRUE perform generic check getting status... ATAPI status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:1, irql 0x16, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 AtapiInterrupt: Entered with status (0x50) AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb6e87da8, status 1 AtapiInterrupt: RequestComplete, srb 0xb6e87da8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e87da8, CDB 0xb6e87dd8, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e87da8 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78fa530 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtapiDmaSetup: mode 0x48, data f7879978, count 200, lCh 1, dev 0 get Phys(PRD=b6e89058) get Phys(data[0]=f7879978) set TERM AtapiDmaSetup: OK IdeReadWrite: Lba 0x0, Count 0x1(0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0 Status 0x0 AtapiDmaStart: read on 0x1:0x0 IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b6e87da8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = TRUE perform generic check getting status... ATAPI status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:1, irql 0x16, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 AtapiInterrupt: Entered with status (0x50) AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb6e87da8, status 1 AtapiInterrupt: RequestComplete, srb 0xb6e87da8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e7d148, CDB 0xb6e7d178, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e7d148 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b6e7d178) AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f7879378, count 800, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f7879378) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b6e7d178 Command 0x28 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb b6e7d148 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xb6e7d148, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 1) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x50 base status 0x50 Unexpected interrupt. OurInterrupt = 0 AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e7d148, CDB 0xb6e7d178, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e7d148 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b6e7d178) AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f7879378, count 800, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f7879378) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b6e7d178 Command 0x28 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb b6e7d148 AtapiStartIo: query PORT for next request AtapiResetController(0) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 0 CompleteType 0x1, Luns 2, chan 0xb71608c8, sptr 0x80996840 ATA path, chan 0xb71608c8 disable intr (0) AtapiDisableInterrupts_0: 0 done send reset wait a little disable intr AtapiDisableInterrupts_0: 1 re-enable intr AtapiEnableInterrupts_0: 2 wait a little (2) done check DMA engine DMA status 0x0 process connected devices 0 - 1 Chan 0xb71608c8 Lun 0x0 Lun ptr 0xb6eda000 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb71608c8 Lun 0x1 Lun ptr 0xb6eda308 HDD at home CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found AtapiResetController: deviceExtension->chan[0].DisableIntr 1 -> 1 AtapiEnableInterrupts_0: 1 AtapiChipInit: dev 0xffffffff, ph chan 0, c 0 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 0 other Intel FindDevices: AtapiDisableInterrupts_0: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x0 FindDevices: select 0 dev on exit AtapiEnableInterrupts_0: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x0, dev 0 AtapiDisableInterrupts_0: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 49 AtaSetTransferMode: Set 0x48 on Device 0/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_0: 1 AtapiHwInitialize: lChannel 0x0, dev 1 AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996840 AtapiResetController: pending SRB 0xb6e7d148, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiResetController(2) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x50 base status 0x50 Unexpected interrupt. OurInterrupt = 0 AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e7d148, CDB 0xb6e7d178, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e7d148 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b6e7d178) AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f7879378, count 800, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f7879378) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b6e7d178 Command 0x28 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb b6e7d148 AtapiStartIo: query PORT for next request AtapiResetController(0) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 0 CompleteType 0x1, Luns 2, chan 0xb71608c8, sptr 0x80996840 ATA path, chan 0xb71608c8 disable intr (0) AtapiDisableInterrupts_0: 0 done send reset wait a little disable intr AtapiDisableInterrupts_0: 1 re-enable intr AtapiEnableInterrupts_0: 2 wait a little (2) done check DMA engine DMA status 0x0 process connected devices 0 - 1 Chan 0xb71608c8 Lun 0x0 Lun ptr 0xb6eda000 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb71608c8 Lun 0x1 Lun ptr 0xb6eda308 HDD at home CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found AtapiResetController: deviceExtension->chan[0].DisableIntr 1 -> 1 AtapiEnableInterrupts_0: 1 AtapiChipInit: dev 0xffffffff, ph chan 0, c 0 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 0 other Intel FindDevices: AtapiDisableInterrupts_0: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x0 FindDevices: select 0 dev on exit AtapiEnableInterrupts_0: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x0, dev 0 AtapiDisableInterrupts_0: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 49 AtaSetTransferMode: Set 0x48 on Device 0/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_0: 1 AtapiHwInitialize: lChannel 0x0, dev 1 AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996840 AtapiResetController: pending SRB 0xb6e7d148, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiResetController(2) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x50 base status 0x50 Unexpected interrupt. OurInterrupt = 0 AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e7d148, CDB 0xb6e7d178, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e7d148 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b6e7d178) AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f7879378, count 800, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f7879378) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b6e7d178 Command 0x28 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb b6e7d148 AtapiStartIo: query PORT for next request AtapiResetController(0) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 0 CompleteType 0x1, Luns 2, chan 0xb71608c8, sptr 0x80996840 ATA path, chan 0xb71608c8 disable intr (0) AtapiDisableInterrupts_0: 0 done send reset wait a little disable intr AtapiDisableInterrupts_0: 1 re-enable intr AtapiEnableInterrupts_0: 2 wait a little (2) done check DMA engine DMA status 0x0 process connected devices 0 - 1 Chan 0xb71608c8 Lun 0x0 Lun ptr 0xb6eda000 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb71608c8 Lun 0x1 Lun ptr 0xb6eda308 HDD at home CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found AtapiResetController: deviceExtension->chan[0].DisableIntr 1 -> 1 AtapiEnableInterrupts_0: 1 AtapiChipInit: dev 0xffffffff, ph chan 0, c 0 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 0 other Intel FindDevices: AtapiDisableInterrupts_0: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x0 FindDevices: select 0 dev on exit AtapiEnableInterrupts_0: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x0, dev 0 AtapiDisableInterrupts_0: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 49 AtaSetTransferMode: Set 0x48 on Device 0/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_0: 1 AtapiHwInitialize: lChannel 0x0, dev 1 AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996840 AtapiResetController: pending SRB 0xb6e7d148, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiResetController(2) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x50 base status 0x50 Unexpected interrupt. OurInterrupt = 0 AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e7d148, CDB 0xb6e7d178, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e7d148 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b6e7d178) AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f7879378, count 800, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f7879378) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b6e7d178 Command 0x28 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb b6e7d148 AtapiStartIo: query PORT for next request AtapiResetController(0) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 0 CompleteType 0x1, Luns 2, chan 0xb71608c8, sptr 0x80996840 ATA path, chan 0xb71608c8 disable intr (0) AtapiDisableInterrupts_0: 0 done send reset wait a little disable intr AtapiDisableInterrupts_0: 1 re-enable intr AtapiEnableInterrupts_0: 2 wait a little (2) done check DMA engine DMA status 0x0 process connected devices 0 - 1 Chan 0xb71608c8 Lun 0x0 Lun ptr 0xb6eda000 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb71608c8 Lun 0x1 Lun ptr 0xb6eda308 HDD at home CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found AtapiResetController: deviceExtension->chan[0].DisableIntr 1 -> 1 AtapiEnableInterrupts_0: 1 AtapiChipInit: dev 0xffffffff, ph chan 0, c 0 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 0 other Intel FindDevices: AtapiDisableInterrupts_0: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x0 FindDevices: select 0 dev on exit AtapiEnableInterrupts_0: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x0, dev 0 AtapiDisableInterrupts_0: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 49 AtaSetTransferMode: Set 0x48 on Device 0/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_0: 1 AtapiHwInitialize: lChannel 0x0, dev 1 AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996840 AtapiResetController: pending SRB 0xb6e7d148, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiResetController(2) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x50 base status 0x50 Unexpected interrupt. OurInterrupt = 0 AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e7d148, CDB 0xb6e7d178, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e7d148 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b6e7d178) AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f7879378, count 800, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f7879378) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b6e7d178 Command 0x28 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb b6e7d148 AtapiStartIo: query PORT for next request AtapiResetController(0) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 0 CompleteType 0x1, Luns 2, chan 0xb71608c8, sptr 0x80996840 ATA path, chan 0xb71608c8 disable intr (0) AtapiDisableInterrupts_0: 0 done send reset wait a little disable intr AtapiDisableInterrupts_0: 1 re-enable intr AtapiEnableInterrupts_0: 2 wait a little (2) done check DMA engine DMA status 0x0 process connected devices 0 - 1 Chan 0xb71608c8 Lun 0x0 Lun ptr 0xb6eda000 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb71608c8 Lun 0x1 Lun ptr 0xb6eda308 HDD at home CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found AtapiResetController: deviceExtension->chan[0].DisableIntr 1 -> 1 AtapiEnableInterrupts_0: 1 AtapiChipInit: dev 0xffffffff, ph chan 0, c 0 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 0 other Intel FindDevices: AtapiDisableInterrupts_0: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x0 FindDevices: select 0 dev on exit AtapiEnableInterrupts_0: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x0, dev 0 AtapiDisableInterrupts_0: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 49 AtaSetTransferMode: Set 0x48 on Device 0/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_0: 1 AtapiHwInitialize: lChannel 0x0, dev 1 AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996840 AtapiResetController: pending SRB 0xb6e7d148, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiResetController(2) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x50 base status 0x50 Unexpected interrupt. OurInterrupt = 0 AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e7d148, CDB 0xb6e7d178, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e7d148 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b6e7d178) AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f7879378, count 800, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f7879378) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b6e7d178 Command 0x28 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb b6e7d148 AtapiStartIo: query PORT for next request AtapiResetController(0) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 0 CompleteType 0x1, Luns 2, chan 0xb71608c8, sptr 0x80996840 ATA path, chan 0xb71608c8 disable intr (0) AtapiDisableInterrupts_0: 0 done send reset wait a little disable intr AtapiDisableInterrupts_0: 1 re-enable intr AtapiEnableInterrupts_0: 2 wait a little (2) done check DMA engine DMA status 0x0 process connected devices 0 - 1 Chan 0xb71608c8 Lun 0x0 Lun ptr 0xb6eda000 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb71608c8 Lun 0x1 Lun ptr 0xb6eda308 HDD at home CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found AtapiResetController: deviceExtension->chan[0].DisableIntr 1 -> 1 AtapiEnableInterrupts_0: 1 AtapiChipInit: dev 0xffffffff, ph chan 0, c 0 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 0 other Intel FindDevices: AtapiDisableInterrupts_0: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x0 FindDevices: select 0 dev on exit AtapiEnableInterrupts_0: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x0, dev 0 AtapiDisableInterrupts_0: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 49 AtaSetTransferMode: Set 0x48 on Device 0/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_0: 1 AtapiHwInitialize: lChannel 0x0, dev 1 AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996840 AtapiResetController: pending SRB 0xb6e7d148, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiResetController(2) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x50 base status 0x50 Unexpected interrupt. OurInterrupt = 0 AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e7d148, CDB 0xb6e7d178, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e7d148 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b6e7d178) AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f7879378, count 800, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f7879378) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b6e7d178 Command 0x28 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb b6e7d148 AtapiStartIo: query PORT for next request AtapiResetController(0) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 0 CompleteType 0x1, Luns 2, chan 0xb71608c8, sptr 0x80996840 ATA path, chan 0xb71608c8 disable intr (0) AtapiDisableInterrupts_0: 0 done send reset wait a little disable intr AtapiDisableInterrupts_0: 1 re-enable intr AtapiEnableInterrupts_0: 2 wait a little (2) done check DMA engine DMA status 0x0 process connected devices 0 - 1 Chan 0xb71608c8 Lun 0x0 Lun ptr 0xb6eda000 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb71608c8 Lun 0x1 Lun ptr 0xb6eda308 HDD at home CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found AtapiResetController: deviceExtension->chan[0].DisableIntr 1 -> 1 AtapiEnableInterrupts_0: 1 AtapiChipInit: dev 0xffffffff, ph chan 0, c 0 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 0 other Intel FindDevices: AtapiDisableInterrupts_0: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x0 FindDevices: select 0 dev on exit AtapiEnableInterrupts_0: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x0, dev 0 AtapiDisableInterrupts_0: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 49 AtaSetTransferMode: Set 0x48 on Device 0/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_0: 1 AtapiHwInitialize: lChannel 0x0, dev 1 AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996840 AtapiResetController: pending SRB 0xb6e7d148, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: