(/srv/buildbot_cmake/full_cmake/build/ntoskrnl/kd/kdio.c:326) ----------------------------------------------------- (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/kd/kdio.c:327) ReactOS 0.4-SVN (Build 20120913-r57292) (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/kd/kdio.c:329) 1 System Processor [0 MB Memory] (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/kd/kdio.c:330) Command Line: /DEBUG /DEBUGPORT=COM1 /BAUDRATE=115200 /SOS /MININT (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/kd/kdio.c:334) ARC Paths: multi(0)disk(0)cdrom(111) \ multi(0)disk(0)cdrom(111) \reactos\ (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/ke/i386/cpu.c:494) Supported CPU features : KF_V86_VIS KF_RDTSC KF_CR4 KF_CMOV KF_GLOBAL_PAGE KF_LARGE_PAGE KF_MTRR KF_CMPXCHG8B KF_MMX KF_WORKING_PTE KF_PAT KF_FXSR KF_FAST_SYSCALL KF_XMMI KF_XMMI64 KF_DTS KF_NX_BIT (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/ke/i386/cpu.c:801) Prefetch Cache: 64 bytes L2 Cache: 0 bytes L2 Cache Line: 64 bytes L2 Cache Associativity: 0 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/mm/ARM3/expool.c:925) EXPOOL: Pool Tracker Table at: 0xB71A9000 with 0xe01c bytes (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/mm/ARM3/expool.c:927) EXPOOL: Big Pool Tracker Table at: 0xB7199000 with 0x10000 bytes (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/mm/ARM3/mminit.c:1430) HAL I/O Mapping at FFFE0000 is unsafe (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/mm/mminit.c:262) 0x80000000 - 0x81800000 Boot Loaded Image (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/mm/mminit.c:266) 0xB0000000 - 0xB1200000 PFN Database (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/mm/mminit.c:270) 0xB1200000 - 0xB71B8000 ARM3 Non Paged Pool (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/mm/mminit.c:274) 0xBB000000 - 0xBD000000 System View Space (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/mm/mminit.c:278) 0xBD000000 - 0xC0000000 Session Space (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/mm/mminit.c:281) 0xC0000000 - 0xC03FFFFF Page Tables (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/mm/mminit.c:284) 0xC0300000 - 0xC0300FFF Page Directories (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/mm/mminit.c:287) 0xC0400000 - 0xC07FFFFF Hyperspace (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/mm/mminit.c:291) 0xE1000000 - 0xECC00000 ARM3 Paged Pool (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/mm/mminit.c:294) 0xECC00000 - 0xF7BE0000 System PTE Space (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/mm/mminit.c:297) 0xF7BE0000 - 0xFFBE0000 Non Paged Pool Expansion PTE Space (/srv/buildbot_cmake/full_cmake/build/hal/halx86/legacy/bussupp.c:591) Your machine has a PCI-to-PCI or CardBUS Bridge. PCI devices may fail! (/srv/buildbot_cmake/full_cmake/build/hal/halx86/legacy/bussupp.c:620) Found parent bus (indicating PCI Bridge). PCI devices may fail! ====== PCI BUS HARDWARE DETECTION ======= 00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 10) Subsystem: P5KPL-VM Motherboard [1043:82b0] Flags: bus master, fast devsel, latency 0 00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 10) Subsystem: Unknown [0000:0000] Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at 00040400 (32-bit, non-prefetchable) [size=1K] Memory at 2000e0e0 (32-bit, non-prefetchable) [size=8K] Memory at feb0fa00 (32-bit, non-prefetchable) [size=512] I/O ports at dff1d000 [size=4K] 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01) Subsystem: P5KPL-CM Motherboard [1043:82ea] Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at f9ef8000 (64-bit, non-prefetchable) [size=32K] Device is using IRQ 10! ISA Cards using that IRQ may fail! 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01) Subsystem: Unknown [0000:0000] Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at 00030300 (32-bit, non-prefetchable) [size=256] Memory at 200000f0 (32-bit, non-prefetchable) [size=512M] Memory at 0000fff0 (32-bit, non-prefetchable) [size=256] I/O ports at 1fff0 [size=16] 00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 01) Subsystem: Unknown [0000:0000] Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at 00020200 (32-bit, non-prefetchable) [size=512] Memory at 2000d0d0 (32-bit, non-prefetchable) [size=4K] Memory at f9f0f9f0 (32-bit, non-prefetchable) [size=256] I/O ports at 1fff0 [size=16] 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 01) Subsystem: P5KPL-VM Motherboard [1043:8179] Flags: bus master, medium devsel, latency 0, IRQ 03 I/O ports at b000 [size=4K] Device is using IRQ 3! ISA Cards using that IRQ may fail! Device is an Intel UHCI (USB) Controller. Turn off Legacy USB in your BIOS! 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 01) Subsystem: P5KPL-VM Motherboard [1043:8179] Flags: bus master, medium devsel, latency 0, IRQ 05 I/O ports at b080 [size=128] Device is using IRQ 5! ISA Cards using that IRQ may fail! Device is an Intel UHCI (USB) Controller. Turn off Legacy USB in your BIOS! 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 01) Subsystem: P5KPL-VM Motherboard [1043:8179] Flags: bus master, medium devsel, latency 0, IRQ 15 I/O ports at b400 [size=1K] Device is using IRQ 15! ISA Cards using that IRQ may fail! Device is an Intel UHCI (USB) Controller. Turn off Legacy USB in your BIOS! 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 01) Subsystem: P5KPL-VM Motherboard [1043:8179] Flags: bus master, medium devsel, latency 0, IRQ 10 I/O ports at b480 [size=128] Device is using IRQ 10! ISA Cards using that IRQ may fail! Device is an Intel UHCI (USB) Controller. Turn off Legacy USB in your BIOS! 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01) Subsystem: P5KPL-VM Motherboard [1043:8179] Flags: bus master, medium devsel, latency 0, IRQ 03 Memory at f9effc00 (32-bit, non-prefetchable) [size=1K] Device is using IRQ 3! ISA Cards using that IRQ may fail! Device is an Intel UHCI (USB) Controller. Turn off Legacy USB in your BIOS! 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) Subsystem: Unknown [0000:0000] Flags: bus master, fast devsel, latency 0 Memory at 20010100 (32-bit, non-prefetchable) [size=256] Memory at 228000f0 (32-bit, non-prefetchable) [size=8M] Memory at 0000fff0 (32-bit, non-prefetchable) [size=256] I/O ports at 1fff0 [size=16] 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01) Subsystem: P5KPL-VM Motherboard [1043:8179] Flags: bus master, medium devsel, latency 0 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) Subsystem: P5KPL-VM Motherboard [1043:8179] Flags: bus master, medium devsel, latency 0, IRQ 15 I/O ports at c080 [size=128] I/O ports at c000 [size=16K] I/O ports at 08f0 [size=16] I/O ports at 08f8 [size=8] I/O ports at b800 [size=2K] 00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller [8086:27c0] (rev 01) Subsystem: P5KPL-VM Motherboard [1043:8179] Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 05 I/O ports at cc00 [size=1K] I/O ports at c880 [size=128] I/O ports at c800 [size=2K] I/O ports at c480 [size=128] I/O ports at c400 [size=1K] 00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01) Subsystem: P5KPL-VM Motherboard [1043:8179] Flags: medium devsel, latency 0, IRQ 05 I/O ports at 0400 [size=1K] Device is using IRQ 5! ISA Cards using that IRQ may fail! 02:00.0 Ethernet controller [0200]: Attansic Technology Corp. Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller [1969:1026] (rev b0) Subsystem: P5KPL-CM Motherboard [1043:8304] Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at f9fc0000 (64-bit, non-prefetchable) [size=256K] I/O ports at dc00 [size=1K] Device is using IRQ 11! ISA Cards using that IRQ may fail! 04:00.0 VGA compatible controller [0300]: nVidia Corporation G92 [GeForce 9800 GT] [10de:0614] (rev a2) Subsystem: Unknown [1019:1a0e] Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at fa000000 (64-bit, non-prefetchable) [size=32M] I/O ports at ec00 [size=1K] Device is using IRQ 10! ISA Cards using that IRQ may fail! ====== PCI BUS DETECTION COMPLETE ======= PC Compatible Eisa/Isa HAL Detected (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:3188) Firmware mapper is enabled (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpreport.c:353) Reported device: DETECTEDInternal\PCI_HAL (Root\PCI_HAL\0) ATAPI IDE MiniPort Driver (UniATA) v 0.44a Parameter PrintLogo Parameter PrintLogo = 0x0 Locate NTOSKRNL.EXE CrNtFindModuleBaseByPtr 0x809439e4, NtBuildNumber CrNtGetProcAddress 0x80800000, NtBuildNumber CrNtGetProcAddress: 0x809439e4 CrNtFindModuleBaseByPtr: 0x80800000 CrNtGetProcAddress 0x80800000, KeNumberProcessors CrNtGetProcAddress: 0x80993280 CrNtFindModuleBaseByPtr 0x8034fe41, HalDisplayString CrNtGetProcAddress 0x8034e000, HalDisplayString CrNtGetProcAddress: 0x8034fe41 CrNtFindModuleBaseByPtr: 0x8034e000 CrNtGetProcAddress 0x80800000, ZwQuerySystemInformation CrNtGetProcAddress: 0x808437b4 CrNtGetProcAddress 0x80800000, PsGetVersion CrNtGetProcAddress: 0x808f3090 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/ex/sysinfo.c:116) User-mode list not yet supported in ReactOS! Init PsGetCurrentProcessId cur 0 CrNtGetProcAddress 0x80800000, PsGetCurrentProcessId CrNtGetProcAddress: 0x808f10af GetProcAddr(NTOSKRNL.EXE,PsGetCurrentProcessId) = 808f10af final Init PsGetCurrentThreadId cur 0 CrNtGetProcAddress 0x80800000, PsGetCurrentThreadId CrNtGetProcAddress: 0x808fac40 GetProcAddr(NTOSKRNL.EXE,PsGetCurrentThreadId) = 808fac40 final Init KeTestSpinLock cur 0 CrNtGetProcAddress 0x80800000, KeTestSpinLock CrNtGetProcAddress: 0x80886682 GetProcAddr(NTOSKRNL.EXE,KeTestSpinLock) = 80886682 final Init InterlockedIncrement cur 0 CrNtGetProcAddress 0x80800000, InterlockedIncrement CrNtGetProcAddress: 0x80830c93 GetProcAddr(NTOSKRNL.EXE,InterlockedIncrement) = 80830c93 final Init InterlockedDecrement cur 0 CrNtGetProcAddress 0x80800000, InterlockedDecrement CrNtGetProcAddress: 0x80830c8a GetProcAddr(NTOSKRNL.EXE,InterlockedDecrement) = 80830c8a final Init InterlockedExchangeAdd cur 0 CrNtGetProcAddress 0x80800000, InterlockedExchangeAdd CrNtGetProcAddress: 0x80830c6e GetProcAddr(NTOSKRNL.EXE,InterlockedExchangeAdd) = 80830c6e final Init InterlockedCompareExchange cur 0 CrNtGetProcAddress 0x80800000, InterlockedCompareExchange CrNtGetProcAddress: 0x80830c7f GetProcAddr(NTOSKRNL.EXE,InterlockedCompareExchange) = 80830c7f final Init HAL.DLL,KeRaiseIrqlToDpcLevel cur 0 CrNtGetProcAddress 0x8034e000, KeRaiseIrqlToDpcLevel CrNtGetProcAddress: 0x80359901 GetProcAddr(HAL.DLL,KeRaiseIrqlToDpcLevel) = 80359901 final 80359901 Init HAL.DLL,KeRaiseIrqlToSynchLevel cur 0 CrNtGetProcAddress 0x8034e000, KeRaiseIrqlToSynchLevel CrNtGetProcAddress: 0x80359926 GetProcAddr(HAL.DLL,KeRaiseIrqlToSynchLevel) = 80359926 final 80359926 Init NDIS.SYS,NdisInitializeReadWriteLock cur 0 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/ex/sysinfo.c:116) User-mode list not yet supported in ReactOS! (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/ex/sysinfo.c:116) User-mode list not yet supported in ReactOS! CrNtGetProcAddress 0xf78fc000, NdisInitializeReadWriteLock CrNtGetProcAddress: 0xf7902136 GetProcAddr(NDIS.SYS,NdisInitializeReadWriteLock) = f7902136 final f7902136 Init NDIS.SYS,NdisAcquireReadWriteLock cur 0 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/ex/sysinfo.c:116) User-mode list not yet supported in ReactOS! (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/ex/sysinfo.c:116) User-mode list not yet supported in ReactOS! CrNtGetProcAddress 0xf78fc000, NdisAcquireReadWriteLock CrNtGetProcAddress: 0xf7901ffc GetProcAddr(NDIS.SYS,NdisAcquireReadWriteLock) = f7901ffc final f7901ffc Init NDIS.SYS,NdisReleaseReadWriteLock cur 0 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/ex/sysinfo.c:116) User-mode list not yet supported in ReactOS! (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/ex/sysinfo.c:116) User-mode list not yet supported in ReactOS! CrNtGetProcAddress 0xf78fc000, NdisReleaseReadWriteLock CrNtGetProcAddress: 0xf7901f9f GetProcAddr(NDIS.SYS,NdisReleaseReadWriteLock) = f7901f9f final f7901f9f check CPU Gen CPU Gen 6 ILOCK ok UniATA Init: OS ver 5.2 (-1073738034), 1 CPU(s) Performance calibration: dt=14995, counter=3038025 InitBadBlocks general InitBadBlocks returned: 0xc0000034 UniataInitAtaCommands: Parameter SkipRaids Parameter SkipRaids = 0x1 Parameter ForceSimplex Parameter ForceSimplex = 0x0 Parameter LogToDisplay Parameter LogToDisplay = 0x0 HwInitializationDataSize = 50 set NeedPhysicalAddresses = TRUE set AtapiAdapterControl() ptr ATAPI IDE enum supported BusMaster Devices Parameter VirtualMachineType Parameter VirtualMachineType = 0x0 Parameter VirtualBox Parameter VirtualBox = 0x0 -- BusID: 0x0:0x1f:0x1 Storage Class DevId = 27DF8086 Class = 0001/0001, ProgIf 8F (!) InterruptPin = 0x1 (!) InterruptLine = 0xf Parameter Include Parameter Include = 0x0 No force include, check exclude Parameter Exclude Parameter Exclude = 0x0 Default device found, pass 0 InterruptPin = 0x1 InterruptLine = 0xf Enabling Mem/Io spaces and busmastering... Initial pciData.Command = 0x5 PCI_ENABLE_IO_SPACE PCI_ENABLE_MEMORY_SPACE New pciData.Command = 0x5 PCI_ENABLE_BUS_MASTER InterruptLine = 0xf Final pciData.Command = 0x5 Range 0 = 0xc081 Range 1 = 0xc001 Range 2 = 0x8f1 Range 3 = 0x8f9 Range 4 = 0xb801 count: BMListLen++ -- BusID: 0x0:0x1f:0x2 Storage Class DevId = 27C08086 Class = 0001/0001, ProgIf 8F Parameter Include Parameter Include = 0x0 No force include, check exclude Parameter Exclude Parameter Exclude = 0x0 Default device found, pass 0 InterruptPin = 0x2 InterruptLine = 0x5 Enabling Mem/Io spaces and busmastering... Initial pciData.Command = 0x5 PCI_ENABLE_IO_SPACE PCI_ENABLE_MEMORY_SPACE New pciData.Command = 0x5 PCI_ENABLE_BUS_MASTER InterruptLine = 0x5 Final pciData.Command = 0x5 Range 0 = 0xcc01 Range 1 = 0xc881 Range 2 = 0xc801 Range 3 = 0xc481 Range 4 = 0xc401 count: BMListLen++ -- BusID: 0x0:0x1f:0x1 Storage Class DevId = 27DF8086 Class = 0001/0001, ProgIf 8F (!) InterruptPin = 0x1 (!) InterruptLine = 0xf Parameter Include Parameter Include = 0x0 No force include, check exclude Parameter Exclude Parameter Exclude = 0x0 Default device found, pass 1 InterruptPin = 0x1 InterruptLine = 0xf Range 0 = 0xc081 Range 1 = 0xc001 Range 2 = 0x8f1 Range 3 = 0x8f9 Range 4 = 0xb801 found suitable device -- BusID: 0x0:0x1f:0x2 Storage Class DevId = 27C08086 Class = 0001/0001, ProgIf 8F Parameter Include Parameter Include = 0x0 No force include, check exclude Parameter Exclude Parameter Exclude = 0x0 Default device found, pass 1 InterruptPin = 0x2 InterruptLine = 0x5 Range 0 = 0xcc01 Range 1 = 0xc881 Range 2 = 0xc801 Range 3 = 0xc481 Range 4 = 0xc401 found suitable device -- BusID: 0x0:0x1f:0x1 Storage Class DevId = 27DF8086 Class = 0001/0001, ProgIf 8F (!) InterruptPin = 0x1 (!) InterruptLine = 0xf Parameter Include Parameter Include = 0x0 No force include, check exclude Parameter Exclude Parameter Exclude = 0x0 Default device found, pass 2 InterruptPin = 0x1 InterruptLine = 0xf Range 0 = 0xc081 Range 1 = 0xc001 Range 2 = 0x8f1 Range 3 = 0x8f9 Range 4 = 0xb801 found suitable device Add to BMList, AltInit 0 -- BusID: 0x0:0x1f:0x2 Storage Class DevId = 27C08086 Class = 0001/0001, ProgIf 8F Parameter Include Parameter Include = 0x0 No force include, check exclude Parameter Exclude Parameter Exclude = 0x0 Default device found, pass 2 InterruptPin = 0x2 InterruptLine = 0x5 Range 0 = 0xcc01 Range 1 = 0xc881 Range 2 = 0xc801 Range 3 = 0xc481 Range 4 = 0xc401 found suitable device Add to BMList, AltInit 0 BMListLen=2 Parameter WaitBusyCount Parameter WaitBusyCount = 0xc8 Parameter WaitBusyDelay Parameter WaitBusyDelay = 0xa Parameter WaitDrqDelay Parameter WaitDrqDelay = 0xa Parameter WaitBusyLongCount Parameter WaitBusyLongCount = 0x7d0 Parameter WaitBusyLongDelay Parameter WaitBusyLongDelay = 0xfa Parameter AtapiSendDisableIntr Parameter AtapiSendDisableIntr = 0x0 Parameter AtapiDmaRawRead Parameter AtapiDmaRawRead = 0x1 Parameter MaxIsrWait Parameter MaxIsrWait = 0x28 ATAPI IDE: Look for legacy ISA-bridged PCI IDE controller (onboard) ATAPI IDE: BMListLen 2 !BMList[i].MasterDev ATAPI IDE: Look for PCI IDE controller ATAPI IDE: i 0, BMListLen 2 Parameter IgnoreNativePci Parameter IgnoreNativePci = 0x0 Try init 8086 27df (/srv/buildbot_cmake/full_cmake/build/hal/halx86/legacy/bussupp.c:1152) Slot assignment for 5 on bus 0 (/srv/buildbot_cmake/full_cmake/build/hal/halx86/legacy/bus/pcibus.c:719) WARNING: PCI Slot Resource Assignment is FOOBAR UniataFindBusMasterController: Context=0, BMListLen=2 ConfigInfo->Length 8c bm_offset 0, channel 0 AdapterInterfaceType=0x5 IoBusNumber=0x0 slotNumber=0x3f busDataRead DevId = 27DF8086 Class = 0001/0001 Storage Class UniataChipDetect: HwFlags: 0x0 Parameter ForceSimplex Parameter ForceSimplex = 0x0 i: 0x28 VendorID/DeviceID/Rev 0x8086/0x27df/0x1 i: 0x18 HwFlags: 0x0 Parameter HwFlagsOverride Parameter HwFlagsOverride = 0x0 HwFlagsOverride: 0x0 Parameter HwFlagsAdd Parameter HwFlagsAdd = 0x0 HwFlagsAdd: 0x0 HwFlags (final): 0x0 MaxTransferMode: 0x45 Parameter MaxTransferMode Parameter MaxTransferMode = 0x45 MaxTransferMode (overriden): 0x45 UniataChipDetectChannels: allocate 2 Luns for 2 channels ForceSimplex = 0 HwFlags = 0 (0)HwFlags = 0 (1)HwFlags = 0 (2)found suitable device HwFlags = 0 (3)Range 0 = 0xc081 Range 1 = 0xc001 Range 2 = 0x8f1 Range 3 = 0x8f9 Range 4 = 0xb801 IsBusMaster == TRUE AtapiGetIoRange: AtapiGetIoRange: rid 0x4, start 0xb800, offs 0x0, len 0x10, mem 0x0 AtapiGetIoRange: (2) 0xb800 BusMasterAddress (base): 0xb800 IsBusMaster == TRUE && !MasterDev BM statusByte = 4 AtapiReadChipConfig: devExt 0xb71742b4 AtapiReadChipConfig: dev 0x0, ph chan -1 Parameter ForceSimplex Parameter ForceSimplex = 0x0 MaxTransferMode (base): 0x45 Parameter MaxTransferMode Parameter MaxTransferMode = 0x45 MaxTransferMode (overriden): 0x45 Parameter MaxTransferMode Parameter MaxTransferMode = 0x45 MaxTransferMode (overriden): 0x45 Parameter AtapiDmaZeroTransfer Parameter AtapiDmaZeroTransfer = 0x0 Parameter AtapiDmaControlCmd Parameter AtapiDmaControlCmd = 0x0 Parameter AtapiDmaRawRead Parameter AtapiDmaRawRead = 0x1 Parameter AtapiDmaReadWrite Parameter AtapiDmaReadWrite = 0x1 AtapiChipInit: dev 0x0, ph chan -2, c -1 HwFlags: 0x0 VendorID/DeviceID/Rev 0x8086/0x27df/0x1 AtapiChipInit: dev 0x0, ph chan 0, c 0 HwFlags: 0x0 VendorID/DeviceID/Rev 0x8086/0x27df/0x1 intel 80-pin check (reg54=0) check failed (not supported) AtapiChipInit: dev 0x0, ph chan 1, c 1 HwFlags: 0x0 VendorID/DeviceID/Rev 0x8086/0x27df/0x1 intel 80-pin check (reg54=0) check failed (not supported) simplexOnly = 0 (2)!MasterDev update ConfigInfo->nt4 using AtaReq sz 1000 update ConfigInfo->w2k: 64bit 0 chan[0] InterruptMode: 0, Level 15, Level2 0, Vector 15, Vector2 0 Reconstruct ConfigInfo set Dma32BitAddresses BMList[i].channel 0x0, NumberChannels 0x2, channel 0x0 de 0xb71742b4, Channel 0x0 chan = 0xb71748c8 AtapiSetupLunPtrs for channel 0 of 2, 2 luns Chan 0xb71748c8 Lun 0x0 Lun ptr 0xb6f1e000 Lun 0x1 Lun ptr 0xb6f1e308 AtapiReadChipConfig: devExt 0xb71742b4 AtapiReadChipConfig: dev 0x0, ph chan 0 Parameter MaxTransferMode Parameter MaxTransferMode = 0x45 MaxTransferMode (overriden): 0x45 Parameter ReorderEnable Parameter ReorderEnable = 0x1 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x45 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x45 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 Getting IO ranges !MasterDev mode IO range 1 0xc080 IO range 2 0xc002 IDX_IO1 0->c080(io) IDX_IO2 10->c002(io) IDX_BM_IO 14->b800(io) IDX_SATA_IO 19->0(io) AltStatus (0x7f) Reg_0x1 (0xc081) = 0x7f Reg_0x2 (0xc082) = 0x7f Reg_0x3 (0xc083) = 0x7f Reg_0x4 (0xc084) = 0x7f Reg_0x5 (0xc085) = 0x7f Reg_0x6 (0xc086) = 0x7f Reg_0x7 (0xc087) = 0x7f BM_0x0 (0xb800) = 0x0 BM_0x1 (0xb801) = 0x0 BM_0x2 (0xb802) = 0x4 BM_0x3 (0xb803) = 0x0 clean IDE intr 0 clean IDE intr 1 DMA status 0x4 clear unexpected DMA intr AtapiDmaDone: dev 0 AtapiDmaAlloc: allocate tmp buffers below 4Gb de 0xb71742b4, Channel 0x1 chan = 0xb7174b30 AtapiSetupLunPtrs for channel 1 of 2, 2 luns Chan 0xb7174b30 Lun 0x0 Lun ptr 0xb6f1e610 Lun 0x1 Lun ptr 0xb6f1e918 AtapiReadChipConfig: devExt 0xb71742b4 AtapiReadChipConfig: dev 0x0, ph chan 1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x45 MaxTransferMode (overriden): 0x45 Parameter ReorderEnable Parameter ReorderEnable = 0x1 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x45 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x45 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 Getting IO ranges !MasterDev mode IO range 1 0x8f0 IO range 2 0x8fa IDX_IO1 0->8f0(io) IDX_IO2 10->8fa(io) IDX_BM_IO 14->b808(io) IDX_SATA_IO 19->0(io) AltStatus (0xff) Reg_0x1 (0x8f1) = 0xff Reg_0x2 (0x8f2) = 0xff Reg_0x3 (0x8f3) = 0xff Reg_0x4 (0x8f4) = 0xff Reg_0x5 (0x8f5) = 0xff Reg_0x6 (0x8f6) = 0xff Reg_0x7 (0x8f7) = 0xff BM_0x0 (0xb808) = 0x0 BM_0x1 (0xb809) = 0x0 BM_0x2 (0xb80a) = 0x0 BM_0x3 (0xb80b) = 0x0 clean IDE intr 0 clean IDE intr 1 DMA status 0x0 AtapiDmaAlloc: allocate tmp buffers below 4Gb exit: init spinlock MasterDev=0x0, NumberChannels=0x2, Isr2DevObj=0x0 Init ISR: Multichannel native mode, go... Create DO DO name: len(38, 38), \Device\uniata0_2ch HalGetInterruptVector OrigAdapterInterfaceType=5 SystemIoBusNumber=0 BusInterruptLevel=15 BusInterruptVector=15 isr2_de 0xb7174798 isr2_vector 0x3f isr2_irql 0xc isr2_affinity 0x1 IoConnectInterrupt MasterDev=0x0, NumberChannels=0x2, Isr2DevObj=0xb71746e0 final chan[2] InterruptMode: 0, Level 15, Level2 0, Vector 15, Vector2 0 return SP_RETURN_FOUND AtapiHwInitialize: (base) AtapiChipInit: dev 0xffffffff, ph chan -1, c -1 HwFlags: 0x0 VendorID/DeviceID/Rev 0x8086/0x27df/0x1 AtapiChipInit: dev 0xffffffff, ph chan 0, c 0 HwFlags: 0x0 VendorID/DeviceID/Rev 0x8086/0x27df/0x1 intel 80-pin check (reg54=0) check failed (not supported) FindDevices: AtapiDisableInterrupts_0: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x0 nobody home! 0x2a != 0xAA CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 7f: DMA status 0x0 nobody home! 0x2a != 0xAA AtapiEnableInterrupts_0: 1 FindDevices: returning 0 AtapiHwInitialize: lChannel 0x0, dev 0 AtapiHwInitialize: lChannel 0x0, dev 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x0 VendorID/DeviceID/Rev 0x8086/0x27df/0x1 intel 80-pin check (reg54=0) check failed (not supported) FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 ff: DMA status 0x0 nobody home! 0xff != 0x55 CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 ff: DMA status 0x0 nobody home! 0xff != 0x55 AtapiEnableInterrupts_1: 1 FindDevices: returning 0 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiHwInitialize: (base) done TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x27df8086/0x1 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf78f9e34 TopLevel (3), AtaReq 0xb7161000 nobody home! 0x2a != 0xAA AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf78f9e34 complete with status 0xa AtapiStartIo: AtapiDmaDBSync(b71748c8, f78f9e34) AtapiStartIo: UniataRemoveRequest(b71748c8, f78f9e34) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71748c8, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1 VendorID+DeviceID/Rev 0x27df8086/0x1 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf78f9e34 TopLevel (3), AtaReq 0xb7161000 nobody home! 0x2a != 0xAA AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf78f9e34 complete with status 0xa AtapiStartIo: AtapiDmaDBSync(b71748c8, f78f9e34) AtapiStartIo: UniataRemoveRequest(b71748c8, f78f9e34) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71748c8, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x27df8086/0x1 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf78f9e34 TopLevel (3), AtaReq 0xb7161000 nobody home! 0xff != 0x55 AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf78f9e34 complete with status 0xa AtapiStartIo: AtapiDmaDBSync(b7174b30, f78f9e34) AtapiStartIo: UniataRemoveRequest(b7174b30, f78f9e34) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b7174b30, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27df8086/0x1 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf78f9e34 TopLevel (3), AtaReq 0xb7161000 nobody home! 0xff != 0x55 AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf78f9e34 complete with status 0xa AtapiStartIo: AtapiDmaDBSync(b7174b30, f78f9e34) AtapiStartIo: UniataRemoveRequest(b7174b30, f78f9e34) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b7174b30, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x0:0x0 VendorID+DeviceID/Rev 0x27df8086/0x1 AtapiStartIo: Communication port INQUIRY AtapiStartIo: Srb 0xf78f9e34 complete with status 0x1 AtapiStartIo: UniataRemoveRequest(0, f78f9e34) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan 0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x1:0x0 VendorID+DeviceID/Rev 0x27df8086/0x1 AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf78f9e34 complete with status 0xa AtapiStartIo: UniataRemoveRequest(0, f78f9e34) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan 0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x0:0x1 VendorID+DeviceID/Rev 0x27df8086/0x1 AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf78f9e34 complete with status 0xa AtapiStartIo: UniataRemoveRequest(0, f78f9e34) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan 0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request ScsiPortInitialize Status 0x0 Parameter IgnoreNativePci Parameter IgnoreNativePci = 0x0 Try init 8086 27c0 (/srv/buildbot_cmake/full_cmake/build/hal/halx86/legacy/bussupp.c:1152) Slot assignment for 5 on bus 0 (/srv/buildbot_cmake/full_cmake/build/hal/halx86/legacy/bus/pcibus.c:719) WARNING: PCI Slot Resource Assignment is FOOBAR UniataFindBusMasterController: Context=1, BMListLen=2 ConfigInfo->Length 8c bm_offset 0, channel 0 AdapterInterfaceType=0x5 IoBusNumber=0x0 slotNumber=0x5f busDataRead DevId = 27C08086 Class = 0001/0001 Storage Class UniataChipDetect: HwFlags: 0x0 Parameter ForceSimplex Parameter ForceSimplex = 0x0 i: 0x28 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 i: 0x19 HwFlags: 0x10001000 Parameter HwFlagsOverride Parameter HwFlagsOverride = 0x10001000 HwFlagsOverride: 0x10001000 Parameter HwFlagsAdd Parameter HwFlagsAdd = 0x0 HwFlagsAdd: 0x0 HwFlags (final): 0x10001000 MaxTransferMode: 0x48 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 UniataChipDetectChannels: Parameter IgnoreAhciPM Parameter IgnoreAhciPM = 0x1 SATA/AHCI w/o PM, max luns 1 or 2 allocate 2 Luns for 2 channels Intel chip config: 0 AtapiGetIoRange: AtapiGetIoRange: rid 0x5, start 0x0, offs 0x0, len 0x10, mem 0x0 AtapiGetIoRange: (2) 0x0 other Intel other Intel ForceSimplex = 0 HwFlags = 10001000 (0)HwFlags = 10001000 (1)HwFlags = 10001000 (2)found suitable device HwFlags = 10001000 (3)Range 0 = 0xcc01 Range 1 = 0xc881 Range 2 = 0xc801 Range 3 = 0xc481 Range 4 = 0xc401 IsBusMaster == TRUE AtapiGetIoRange: AtapiGetIoRange: rid 0x4, start 0xc400, offs 0x0, len 0x10, mem 0x0 AtapiGetIoRange: (2) 0xc400 BusMasterAddress (base): 0xc400 IsBusMaster == TRUE && !MasterDev BM statusByte = 20 AtapiReadChipConfig: devExt 0xb71602b4 AtapiReadChipConfig: dev 0x1, ph chan -1 Parameter ForceSimplex Parameter ForceSimplex = 0x0 MaxTransferMode (base): 0x48 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 Parameter AtapiDmaZeroTransfer Parameter AtapiDmaZeroTransfer = 0x0 Parameter AtapiDmaControlCmd Parameter AtapiDmaControlCmd = 0x0 Parameter AtapiDmaRawRead Parameter AtapiDmaRawRead = 0x1 Parameter AtapiDmaReadWrite Parameter AtapiDmaReadWrite = 0x1 AtapiChipInit: dev 0x1, ph chan -2, c -1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA Base init simplexOnly = 0 (2)!MasterDev update ConfigInfo->nt4 using AtaReq sz 1000 update ConfigInfo->w2k: 64bit 0 chan[0] InterruptMode: 0, Level 5, Level2 0, Vector 5, Vector2 0 Reconstruct ConfigInfo set Dma32BitAddresses BMList[i].channel 0x0, NumberChannels 0x2, channel 0x0 de 0xb71602b4, Channel 0x0 chan = 0xb71608c8 AtapiSetupLunPtrs for channel 0 of 2, 2 luns Chan 0xb71608c8 Lun 0x0 Lun ptr 0xb6eda000 Lun 0x1 Lun ptr 0xb6eda308 AtapiReadChipConfig: devExt 0xb71602b4 AtapiReadChipConfig: dev 0x1, ph chan 0 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 Parameter ReorderEnable Parameter ReorderEnable = 0x1 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 Getting IO ranges !MasterDev mode IO range 1 0xcc00 IO range 2 0xc882 IDX_IO1 0->cc00(io) IDX_IO2 10->c882(io) IDX_BM_IO 14->c400(io) IDX_SATA_IO 19->0(io) AltStatus (0x50) Reg_0x1 (0xcc01) = 0x0 Reg_0x2 (0xcc02) = 0x0 Reg_0x3 (0xcc03) = 0x0 Reg_0x4 (0xcc04) = 0x0 Reg_0x5 (0xcc05) = 0x0 Reg_0x6 (0xcc06) = 0xe0 Reg_0x7 (0xcc07) = 0x50 BM_0x0 (0xc400) = 0x0 BM_0x1 (0xc401) = 0x0 BM_0x2 (0xc402) = 0x20 BM_0x3 (0xc403) = 0x0 clean IDE intr 0 clean IDE intr 1 DMA status 0x20 AtapiDmaAlloc: allocate tmp buffers below 4Gb de 0xb71602b4, Channel 0x1 chan = 0xb7160b30 AtapiSetupLunPtrs for channel 1 of 2, 2 luns Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 Lun 0x1 Lun ptr 0xb6eda918 AtapiReadChipConfig: devExt 0xb71602b4 AtapiReadChipConfig: dev 0x1, ph chan 1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 Parameter ReorderEnable Parameter ReorderEnable = 0x1 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 Getting IO ranges !MasterDev mode IO range 1 0xc800 IO range 2 0xc482 IDX_IO1 0->c800(io) IDX_IO2 10->c482(io) IDX_BM_IO 14->c408(io) IDX_SATA_IO 19->0(io) AltStatus (0x50) Reg_0x1 (0xc801) = 0x0 Reg_0x2 (0xc802) = 0x3 Reg_0x3 (0xc803) = 0x0 Reg_0x4 (0xc804) = 0x0 Reg_0x5 (0xc805) = 0x8 Reg_0x6 (0xc806) = 0xb0 Reg_0x7 (0xc807) = 0x50 BM_0x0 (0xc408) = 0x0 BM_0x1 (0xc409) = 0x0 BM_0x2 (0xc40a) = 0x60 BM_0x3 (0xc40b) = 0x0 clean IDE intr 0 clean IDE intr 1 DMA status 0x60 AtapiDmaAlloc: allocate tmp buffers below 4Gb exit: init spinlock MasterDev=0x0, NumberChannels=0x2, Isr2DevObj=0x0 Init ISR: Multichannel native mode, go... Create DO DO name: len(38, 38), \Device\uniata1_2ch HalGetInterruptVector OrigAdapterInterfaceType=5 SystemIoBusNumber=0 BusInterruptLevel=5 BusInterruptVector=5 isr2_de 0xb71729d0 isr2_vector 0x35 isr2_irql 0x16 isr2_affinity 0x1 IoConnectInterrupt MasterDev=0x0, NumberChannels=0x2, Isr2DevObj=0xb7172918 final chan[2] InterruptMode: 0, Level 5, Level2 0, Vector 5, Vector2 0 return SP_RETURN_FOUND AtapiHwInitialize: (base) AtapiChipInit: dev 0xffffffff, ph chan -1, c -1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA Base init AtapiChipInit: dev 0xffffffff, ph chan 0, c 0 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 0 other Intel 0 -> 0/2 FindDevices: AtapiDisableInterrupts_0: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x20 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223218672 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=ffffffff tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x24 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x0 FindDevices: select 0 dev on exit AtapiEnableInterrupts_0: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x0, dev 0 AtapiDisableInterrupts_0: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223218672 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 49 AtaSetTransferMode: Set 0x48 on Device 0/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_0: 1 AtapiHwInitialize: lChannel 0x0, dev 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x60 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223218672 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=ffffffff tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x60 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223218672 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223218672 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: ATAPI/Changer branch try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: (base) done AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x50 base status 0x50 Unexpected interrupt. OurInterrupt = 0 AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x64 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... IDE status 0x50 base status 0x50 Unexpected interrupt. OurInterrupt = 2 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78f9e34, CDB 0xf78f9e64, AtaReq 0xb6e89000, SCmd 0x12 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf78f9e34 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78f9b30 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_INQUIRY PATH:LUN:TID = 0x0:0x0:0x0 IdeSendCommand: SCSIOP_INQUIRY ok HDD at home RelativeAddressing IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf78f9e34 complete with status 0x1 AtapiStartIo: AtapiDmaDBSync(b71608c8, f78f9e34) AtapiStartIo: UniataRemoveRequest(b71608c8, f78f9e34) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71608c8, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x1:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf78f9e34 complete with status 0xa AtapiStartIo: UniataRemoveRequest(0, f78f9e34) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan 0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf78f9e34 TopLevel (3), AtaReq 0xb6e89000 HDD at home CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x0 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf78f9e34 complete with status 0xa AtapiStartIo: AtapiDmaDBSync(b71608c8, f78f9e34) AtapiStartIo: UniataRemoveRequest(b71608c8, f78f9e34) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71608c8, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78f9e34, CDB 0xf78f9e64, AtaReq 0xb6e89000, SCmd 0x12 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf78f9e34 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78f9b30 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_INQUIRY PATH:LUN:TID = 0x1:0x0:0x0 IdeSendCommand: SCSIOP_INQUIRY ok HDD at home RelativeAddressing IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf78f9e34 complete with status 0x1 AtapiStartIo: AtapiDmaDBSync(b7160b30, f78f9e34) AtapiStartIo: UniataRemoveRequest(b7160b30, f78f9e34) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b7160b30, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x1:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf78f9e34 complete with status 0xa AtapiStartIo: UniataRemoveRequest(0, f78f9e34) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan 0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78f9e34, CDB 0xf78f9e64, AtaReq 0xb6e89000, SCmd 0x12 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf78f9e34 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 12 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: BuildMechanismStatusSrb() MechanismStatusSrb 0xb7160b6c AtapiSendCommand: AtapiSendCommand recursive AtapiSendCommand: req state 0x20, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb b7160b9c) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data b7160b4c, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=b7160b4c) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b7160b9c Command 0xbd to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiSendCommand: SRB_STATUS_PENDING (2) AtapiStartIo: next Srb f78f9e34 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xb7160b6c, chan 0xb7160b30 restore original SRB 0xf78f9e34 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78f9e34, CDB 0xf78f9e64, AtaReq 0xb6e89000, SCmd 0x12 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf78f9e34 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 12 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 12 (Cdb f78f9e64) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788ef80, count 24, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788ef80) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 12 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78f9e64 Command 0x12 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78f9e34 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = TRUE perform generic check getting status... ATAPI status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:1, irql 0x16, c 1 DmaTransfer = TRUE dev_type ATAPI OldReqState = 42 AtapiInterrupt: ATAPI Entered with status (0x50) AtapiInterrupt: iReason 3 AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 3 AtapiInterrupt: i-reason=3, status=0x50 AtapiInterrupt: interruptReason = CompleteRequest AtapiInterrupt: CompleteRequest, was DmaTransfer AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 24, full size 24 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xf78f9e34, status 1 AtapiInterrupt: RequestComplete, srb 0xf78f9e34 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x1:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf78f9e34 complete with status 0xa AtapiStartIo: UniataRemoveRequest(0, f78f9e34) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan 0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 AtapiStartIo: Communication port INQUIRY AtapiStartIo: Srb 0xf78f9e34 complete with status 0x1 AtapiStartIo: UniataRemoveRequest(0, f78f9e34) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan 0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x1:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf78f9e34 complete with status 0xa AtapiStartIo: UniataRemoveRequest(0, f78f9e34) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan 0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf78f9e34 complete with status 0xa AtapiStartIo: UniataRemoveRequest(0, f78f9e34) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan 0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request ScsiPortInitialize Status 0x0 Parameter IgnoreIsa Parameter IgnoreIsa = 0x0 ATAPI IDE: Look for ISA Controllers AtapiFindController: assume max PIO4 allocate 2 Luns for 1 channels AtapiSetupLunPtrs for channel 0 of 1, 2 luns Chan 0xb6e87008 Lun 0x0 Lun ptr 0xb715b008 Lun 0x1 Lun ptr 0xb715b310 AtapiReadChipConfig: devExt 0xb6e887f4 AtapiReadChipConfig: dev 0xffffffff, ph chan -1 Parameter ForceSimplex Parameter ForceSimplex = 0x0 MaxTransferMode (base): 0xc Parameter MaxTransferMode Parameter MaxTransferMode = 0xc MaxTransferMode (overriden): 0xc Parameter AtapiDmaZeroTransfer Parameter AtapiDmaZeroTransfer = 0x0 Parameter AtapiDmaControlCmd Parameter AtapiDmaControlCmd = 0x0 Parameter AtapiDmaRawRead Parameter AtapiDmaRawRead = 0x1 Parameter AtapiDmaReadWrite Parameter AtapiDmaReadWrite = 0x1 AtapiChipInit: dev 0xffffffff, ph chan -1, c -1 HwFlags: 0x0 VendorID/DeviceID/Rev 0x0/0x0/0x0 Parameter PortBase Parameter PortBase = 0x0 Parameter Irq Parameter Irq = 0x0 BaseIoAddress1=1f0 BaseIoAddress2=3f6 AltStatus (0xff) Reg_0x1 (0x1f1) = 0xff Reg_0x2 (0x1f2) = 0xff Reg_0x3 (0x1f3) = 0xff Reg_0x4 (0x1f4) = 0xff Reg_0x5 (0x1f5) = 0xff Reg_0x6 (0x1f6) = 0xff Reg_0x7 (0x1f7) = 0xff BM_0x0 (0x0) = 0x0 BM_0x1 (0x0) = 0x0 BM_0x2 (0x0) = 0x0 BM_0x3 (0x0) = 0x0 AtapiFindController: Identifier read back from Master (0xff) AtapiFindController: Identifier read back from Slave (0xff) Parameter PortBase Parameter PortBase = 0x0 Parameter Irq Parameter Irq = 0x0 BaseIoAddress1=170 BaseIoAddress2=376 AltStatus (0xff) Reg_0x1 (0x171) = 0xff Reg_0x2 (0x172) = 0xff Reg_0x3 (0x173) = 0xff Reg_0x4 (0x174) = 0xff Reg_0x5 (0x175) = 0xff Reg_0x6 (0x176) = 0xff Reg_0x7 (0x177) = 0xff BM_0x0 (0x0) = 0x0 BM_0x1 (0x0) = 0x0 BM_0x2 (0x0) = 0x0 BM_0x3 (0x0) = 0x0 AtapiFindController: Identifier read back from Master (0xff) AtapiFindController: Identifier read back from Slave (0xff) Parameter PortBase Parameter PortBase = 0x0 Parameter Irq Parameter Irq = 0x0 BaseIoAddress1=1e8 BaseIoAddress2=3ee AltStatus (0xff) Reg_0x1 (0x1e9) = 0xff Reg_0x2 (0x1ea) = 0xff Reg_0x3 (0x1eb) = 0xff Reg_0x4 (0x1ec) = 0xff Reg_0x5 (0x1ed) = 0xff Reg_0x6 (0x1ee) = 0xff Reg_0x7 (0x1ef) = 0xff BM_0x0 (0x0) = 0x0 BM_0x1 (0x0) = 0x0 BM_0x2 (0x0) = 0x0 BM_0x3 (0x0) = 0x0 AtapiFindController: Identifier read back from Master (0xff) AtapiFindController: Identifier read back from Slave (0xff) Parameter PortBase Parameter PortBase = 0x0 Parameter Irq Parameter Irq = 0x0 BaseIoAddress1=168 BaseIoAddress2=36e AltStatus (0xff) Reg_0x1 (0x169) = 0xff Reg_0x2 (0x16a) = 0xff Reg_0x3 (0x16b) = 0xff Reg_0x4 (0x16c) = 0xff Reg_0x5 (0x16d) = 0xff Reg_0x6 (0x16e) = 0xff Reg_0x7 (0x16f) = 0xff BM_0x0 (0x0) = 0x0 BM_0x1 (0x0) = 0x0 BM_0x2 (0x0) = 0x0 BM_0x3 (0x0) = 0x0 AtapiFindController: Identifier read back from Master (0xff) AtapiFindController: Identifier read back from Slave (0xff) AtapiFindController: return SP_RETURN_NOT_FOUND ScsiPortInitialize Status 0xc00000c0 Parameter IgnoreMca Parameter IgnoreMca = 0x0 ATAPI IDE: Look for MCA Controllers ScsiPortInitialize Status 0xc00000c0 Leave UNIATA MiniPort DriverEntry with status 0x0 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:1575) '\Driver\BUSLOGIC' initialization failed, status (0xc00000c0) (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:61) Deleting driver object '\Driver\BUSLOGIC' TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa348, CDB 0xf78fa378, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78fa348 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f78fa378) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa378 Command 0x25 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa348 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa348, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 1) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa348, CDB 0xf78fa378, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78fa348 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f78fa378) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa378 Command 0x25 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa348 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa348, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa348, CDB 0xf78fa378, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78fa348 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f78fa378) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa378 Command 0x25 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa348 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa348, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa348, CDB 0xf78fa378, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78fa348 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f78fa378) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa378 Command 0x25 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa348 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa348, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa348, CDB 0xf78fa378, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78fa348 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f78fa378) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa378 Command 0x25 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa348 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa348, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa348, CDB 0xf78fa378, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78fa348 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f78fa378) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa378 Command 0x25 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa348 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa348, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa348, CDB 0xf78fa378, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78fa348 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f78fa378) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa378 Command 0x25 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa348 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa348, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa348, CDB 0xf78fa378, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78fa348 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f78fa378) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa378 Command 0x25 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa348 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa348, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa348, CDB 0xf78fa378, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78fa348 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f78fa378) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa378 Command 0x25 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa348 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa348, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa348, CDB 0xf78fa378, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78fa348 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f78fa378) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa378 Command 0x25 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa348 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa348, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa348, CDB 0xf78fa378, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78fa348 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f78fa378) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa378 Command 0x25 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa348 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa348, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa348, CDB 0xf78fa378, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78fa348 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f78fa378) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa378 Command 0x25 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa348 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa348, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa348, CDB 0xf78fa378, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78fa348 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f78fa378) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa378 Command 0x25 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa348 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa348, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa348, CDB 0xf78fa378, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78fa348 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f78fa378) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa378 Command 0x25 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa348 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa348, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa348, CDB 0xf78fa378, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78fa348 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f78fa378) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa378 Command 0x25 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa348 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa348, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa348, CDB 0xf78fa378, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78fa348 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f78fa378) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa378 Command 0x25 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa348 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa348, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa34c, CDB 0xf78fa37c, AtaReq 0xb6e89000, SCmd 0xbd UniataNeedQueueing: TopLevel, qd=0 Send to device bd TopLevel (2), srb 0xf78fa34c TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send bd AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f78fa37c) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa37c Command 0xbd to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa34c AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa34c, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa34c, CDB 0xf78fa37c, AtaReq 0xb6e89000, SCmd 0xbd UniataNeedQueueing: TopLevel, qd=0 Send to device bd TopLevel (2), srb 0xf78fa34c TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send bd AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f78fa37c) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa37c Command 0xbd to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa34c AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa34c, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa34c, CDB 0xf78fa37c, AtaReq 0xb6e89000, SCmd 0xbd UniataNeedQueueing: TopLevel, qd=0 Send to device bd TopLevel (2), srb 0xf78fa34c TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send bd AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f78fa37c) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa37c Command 0xbd to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa34c AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa34c, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa34c, CDB 0xf78fa37c, AtaReq 0xb6e89000, SCmd 0xbd UniataNeedQueueing: TopLevel, qd=0 Send to device bd TopLevel (2), srb 0xf78fa34c TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send bd AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f78fa37c) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa37c Command 0xbd to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa34c AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa34c, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa34c, CDB 0xf78fa37c, AtaReq 0xb6e89000, SCmd 0xbd UniataNeedQueueing: TopLevel, qd=0 Send to device bd TopLevel (2), srb 0xf78fa34c TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send bd AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f78fa37c) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa37c Command 0xbd to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa34c AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa34c, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa34c, CDB 0xf78fa37c, AtaReq 0xb6e89000, SCmd 0xbd UniataNeedQueueing: TopLevel, qd=0 Send to device bd TopLevel (2), srb 0xf78fa34c TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send bd AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f78fa37c) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa37c Command 0xbd to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa34c AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa34c, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa34c, CDB 0xf78fa37c, AtaReq 0xb6e89000, SCmd 0xbd UniataNeedQueueing: TopLevel, qd=0 Send to device bd TopLevel (2), srb 0xf78fa34c TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send bd AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f78fa37c) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa37c Command 0xbd to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa34c AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa34c, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa34c, CDB 0xf78fa37c, AtaReq 0xb6e89000, SCmd 0xbd UniataNeedQueueing: TopLevel, qd=0 Send to device bd TopLevel (2), srb 0xf78fa34c TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send bd AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f78fa37c) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa37c Command 0xbd to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa34c AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa34c, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa34c, CDB 0xf78fa37c, AtaReq 0xb6e89000, SCmd 0xbd UniataNeedQueueing: TopLevel, qd=0 Send to device bd TopLevel (2), srb 0xf78fa34c TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send bd AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f78fa37c) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa37c Command 0xbd to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa34c AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa34c, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa34c, CDB 0xf78fa37c, AtaReq 0xb6e89000, SCmd 0xbd UniataNeedQueueing: TopLevel, qd=0 Send to device bd TopLevel (2), srb 0xf78fa34c TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send bd AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f78fa37c) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa37c Command 0xbd to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa34c AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa34c, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa34c, CDB 0xf78fa37c, AtaReq 0xb6e89000, SCmd 0xbd UniataNeedQueueing: TopLevel, qd=0 Send to device bd TopLevel (2), srb 0xf78fa34c TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send bd AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f78fa37c) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa37c Command 0xbd to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa34c AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa34c, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa34c, CDB 0xf78fa37c, AtaReq 0xb6e89000, SCmd 0xbd UniataNeedQueueing: TopLevel, qd=0 Send to device bd TopLevel (2), srb 0xf78fa34c TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send bd AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f78fa37c) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa37c Command 0xbd to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa34c AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa34c, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa34c, CDB 0xf78fa37c, AtaReq 0xb6e89000, SCmd 0xbd UniataNeedQueueing: TopLevel, qd=0 Send to device bd TopLevel (2), srb 0xf78fa34c TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send bd AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f78fa37c) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa37c Command 0xbd to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa34c AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa34c, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa34c, CDB 0xf78fa37c, AtaReq 0xb6e89000, SCmd 0xbd UniataNeedQueueing: TopLevel, qd=0 Send to device bd TopLevel (2), srb 0xf78fa34c TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send bd AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f78fa37c) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa37c Command 0xbd to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa34c AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa34c, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa34c, CDB 0xf78fa37c, AtaReq 0xb6e89000, SCmd 0xbd UniataNeedQueueing: TopLevel, qd=0 Send to device bd TopLevel (2), srb 0xf78fa34c TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send bd AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f78fa37c) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa37c Command 0xbd to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa34c AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa34c, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa34c, CDB 0xf78fa37c, AtaReq 0xb6e89000, SCmd 0xbd UniataNeedQueueing: TopLevel, qd=0 Send to device bd TopLevel (2), srb 0xf78fa34c TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send bd AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f78fa37c) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e110, count 8, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e110) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa37c Command 0xbd to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa34c AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa34c, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 1a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 14, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 1a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x1a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 1a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 14, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 1a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x1a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 1a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 14, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 1a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x1a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 1a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 14, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 1a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x1a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 1a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 14, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 1a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x1a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 1a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 14, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 1a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x1a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 1a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 14, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 1a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x1a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 1a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 14, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 1a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x1a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 1a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 14, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 1a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x1a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 1a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 14, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 1a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x1a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 1a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 14, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 1a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x1a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 1a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 14, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 1a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x1a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 1a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 14, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 1a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x1a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 1a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 14, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 1a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x1a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 1a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 14, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 1a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x1a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 1a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 14, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 1a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x1a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x5a UniataNeedQueueing: TopLevel, qd=0 Send to device 5a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 5a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 18, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 5a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x5a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x5a UniataNeedQueueing: TopLevel, qd=0 Send to device 5a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 5a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 18, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 5a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x5a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x5a UniataNeedQueueing: TopLevel, qd=0 Send to device 5a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 5a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 18, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 5a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x5a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x5a UniataNeedQueueing: TopLevel, qd=0 Send to device 5a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 5a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 18, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 5a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x5a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x5a UniataNeedQueueing: TopLevel, qd=0 Send to device 5a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 5a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 18, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 5a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x5a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x5a UniataNeedQueueing: TopLevel, qd=0 Send to device 5a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 5a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 18, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 5a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x5a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x5a UniataNeedQueueing: TopLevel, qd=0 Send to device 5a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 5a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 18, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 5a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x5a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x5a UniataNeedQueueing: TopLevel, qd=0 Send to device 5a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 5a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 18, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 5a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x5a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x5a UniataNeedQueueing: TopLevel, qd=0 Send to device 5a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 5a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 18, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 5a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x5a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x5a UniataNeedQueueing: TopLevel, qd=0 Send to device 5a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 5a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 18, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 5a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x5a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x5a UniataNeedQueueing: TopLevel, qd=0 Send to device 5a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 5a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 18, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 5a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x5a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x5a UniataNeedQueueing: TopLevel, qd=0 Send to device 5a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 5a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 18, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 5a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x5a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x5a UniataNeedQueueing: TopLevel, qd=0 Send to device 5a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 5a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 18, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 5a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x5a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x5a UniataNeedQueueing: TopLevel, qd=0 Send to device 5a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 5a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 18, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 5a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x5a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x5a UniataNeedQueueing: TopLevel, qd=0 Send to device 5a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 5a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 18, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 5a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x5a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa3d4, CDB 0xf78fa404, AtaReq 0xb6e89000, SCmd 0x5a UniataNeedQueueing: TopLevel, qd=0 Send to device 5a TopLevel (2), srb 0xf78fa3d4 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 5a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f78fa404) assume IN AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f788e5f0, count 18, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f788e5f0) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 5a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f78fa404 Command 0x5a to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb f78fa3d4 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xf78fa3d4, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x0 base status 0x0 no DRQ/DRDY set AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa284, CDB 0xf78fa2b4, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa284 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0x809966f4 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_MODE_SENSE PATH:LUN:TID = 0x0:0x0:0x0 IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf78fa284 complete with status 0x6 AtapiStartIo: AtapiDmaDBSync(b71608c8, f78fa284) AtapiStartIo: UniataRemoveRequest(b71608c8, f78fa284) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71608c8, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa284, CDB 0xf78fa2b4, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa284 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78f9f50 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_MODE_SENSE PATH:LUN:TID = 0x0:0x0:0x0 IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf78fa284 complete with status 0x6 AtapiStartIo: AtapiDmaDBSync(b71608c8, f78fa284) AtapiStartIo: UniataRemoveRequest(b71608c8, f78fa284) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71608c8, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa2a8, CDB 0xf78fa2d8, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78fa2a8 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78f9f70 ** Ide: Command AtaReq 0xb6e89000 ** --- ** ** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x0:0x0:0x0 ** IDE disk 0x0 - #sectors 0x3f, #heads 0xff, #cylinders 0xed81 IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf78fa2a8 complete with status 0x1 AtapiStartIo: AtapiDmaDBSync(b71608c8, f78fa2a8) AtapiStartIo: UniataRemoveRequest(b71608c8, f78fa2a8) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71608c8, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e87250, CDB 0xb6e87280, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e87250 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78f9e08 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtapiDmaSetup: mode 0x48, data f788e000, count 200, lCh 0, dev 0 get Phys(PRD=b6e89058) get Phys(data[0]=f788e000) set TERM AtapiDmaSetup: OK IdeReadWrite: Lba 0x0, Count 0x1(0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0 Status 0x0 AtapiDmaStart: read on 0x0:0x0 IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b6e87250 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 1) AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE perform generic check getting status... IDE status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:0, irql 0x16, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 AtapiInterrupt: Entered with status (0x50) AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb6e87250, status 1 AtapiInterrupt: RequestComplete, srb 0xb6e87250 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e87250, CDB 0xb6e87280, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e87250 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78f9cf8 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtapiDmaSetup: mode 0x48, data f788e000, count 200, lCh 0, dev 0 get Phys(PRD=b6e89058) get Phys(data[0]=f788e000) set TERM AtapiDmaSetup: OK IdeReadWrite: Lba 0x0, Count 0x1(0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0 Status 0x0 AtapiDmaStart: read on 0x0:0x0 IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b6e87250 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 2) AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE perform generic check getting status... IDE status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:0, irql 0x16, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 AtapiInterrupt: Entered with status (0x50) AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb6e87250, status 1 AtapiInterrupt: RequestComplete, srb 0xb6e87250 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78f9ed8, CDB 0xf78f9f08, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78f9ed8 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78f9ba0 ** Ide: Command AtaReq 0xb6e89000 ** --- ** ** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x0:0x0:0x0 ** IDE disk 0x0 - #sectors 0x3f, #heads 0xff, #cylinders 0xed81 IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf78f9ed8 complete with status 0x1 AtapiStartIo: AtapiDmaDBSync(b71608c8, f78f9ed8) AtapiStartIo: UniataRemoveRequest(b71608c8, f78f9ed8) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71608c8, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e87250, CDB 0xb6e87280, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e87250 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78f9d68 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtapiDmaSetup: mode 0x48, data f788e9e8, count 200, lCh 0, dev 0 get Phys(PRD=b6e89058) get Phys(data[0]=f788e9e8) set TERM AtapiDmaSetup: OK IdeReadWrite: Lba 0x0, Count 0x1(0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0 Status 0x0 AtapiDmaStart: read on 0x0:0x0 IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b6e87250 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 2) AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE perform generic check getting status... IDE status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:0, irql 0x16, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 AtapiInterrupt: Entered with status (0x50) AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb6e87250, status 1 AtapiInterrupt: RequestComplete, srb 0xb6e87250 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e87250, CDB 0xb6e87280, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e87250 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78f9d80 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtapiDmaSetup: mode 0x48, data f788e000, count 200, lCh 0, dev 0 get Phys(PRD=b6e89058) get Phys(data[0]=f788e000) set TERM AtapiDmaSetup: OK IdeReadWrite: Lba 0x0, Count 0x1(0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0 Status 0x0 AtapiDmaStart: read on 0x0:0x0 IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b6e87250 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 2) AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE perform generic check getting status... IDE status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:0, irql 0x16, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 AtapiInterrupt: Entered with status (0x50) AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb6e87250, status 1 AtapiInterrupt: RequestComplete, srb 0xb6e87250 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa284, CDB 0xf78fa2b4, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa284 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78f9f50 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_MODE_SENSE PATH:LUN:TID = 0x1:0x0:0x0 IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf78fa284 complete with status 0x6 AtapiStartIo: AtapiDmaDBSync(b7160b30, f78fa284) AtapiStartIo: UniataRemoveRequest(b7160b30, f78fa284) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b7160b30, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa284, CDB 0xf78fa2b4, AtaReq 0xb6e89000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78fa284 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78f9f50 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_MODE_SENSE PATH:LUN:TID = 0x1:0x0:0x0 IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf78fa284 complete with status 0x6 AtapiStartIo: AtapiDmaDBSync(b7160b30, f78fa284) AtapiStartIo: UniataRemoveRequest(b7160b30, f78fa284) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b7160b30, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78fa2a8, CDB 0xf78fa2d8, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78fa2a8 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78f9f70 ** Ide: Command AtaReq 0xb6e89000 ** --- ** ** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x1:0x0:0x0 ** IDE disk 0x0 - #sectors 0x3f, #heads 0xff, #cylinders 0xed81 IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf78fa2a8 complete with status 0x1 AtapiStartIo: AtapiDmaDBSync(b7160b30, f78fa2a8) AtapiStartIo: UniataRemoveRequest(b7160b30, f78fa2a8) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b7160b30, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e87da8, CDB 0xb6e87dd8, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e87da8 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78f9e08 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtapiDmaSetup: mode 0x48, data f788e000, count 200, lCh 1, dev 0 get Phys(PRD=b6e89058) get Phys(data[0]=f788e000) set TERM AtapiDmaSetup: OK IdeReadWrite: Lba 0x0, Count 0x1(0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0 Status 0x0 AtapiDmaStart: read on 0x1:0x0 IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b6e87da8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = TRUE perform generic check getting status... ATAPI status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:1, irql 0x16, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 AtapiInterrupt: Entered with status (0x50) AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb6e87da8, status 1 AtapiInterrupt: RequestComplete, srb 0xb6e87da8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e87da8, CDB 0xb6e87dd8, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e87da8 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78f9cf8 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtapiDmaSetup: mode 0x48, data f788e000, count 200, lCh 1, dev 0 get Phys(PRD=b6e89058) get Phys(data[0]=f788e000) set TERM AtapiDmaSetup: OK IdeReadWrite: Lba 0x0, Count 0x1(0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0 Status 0x0 AtapiDmaStart: read on 0x1:0x0 IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b6e87da8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = TRUE perform generic check getting status... ATAPI status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:1, irql 0x16, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 AtapiInterrupt: Entered with status (0x50) AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb6e87da8, status 1 AtapiInterrupt: RequestComplete, srb 0xb6e87da8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xf78f9ed8, CDB 0xf78f9f08, AtaReq 0xb6e89000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78f9ed8 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78f9ba0 ** Ide: Command AtaReq 0xb6e89000 ** --- ** ** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x1:0x0:0x0 ** IDE disk 0x0 - #sectors 0x3f, #heads 0xff, #cylinders 0xed81 IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf78f9ed8 complete with status 0x1 AtapiStartIo: AtapiDmaDBSync(b7160b30, f78f9ed8) AtapiStartIo: UniataRemoveRequest(b7160b30, f78f9ed8) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b7160b30, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e87da8, CDB 0xb6e87dd8, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e87da8 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78f9d68 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtapiDmaSetup: mode 0x48, data f788e2f8, count 200, lCh 1, dev 0 get Phys(PRD=b6e89058) get Phys(data[0]=f788e2f8) set TERM AtapiDmaSetup: OK IdeReadWrite: Lba 0x0, Count 0x1(0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0 Status 0x0 AtapiDmaStart: read on 0x1:0x0 IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b6e87da8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = TRUE perform generic check getting status... ATAPI status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:1, irql 0x16, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 AtapiInterrupt: Entered with status (0x50) AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb6e87da8, status 1 AtapiInterrupt: RequestComplete, srb 0xb6e87da8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e87da8, CDB 0xb6e87dd8, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e87da8 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78f9d80 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtapiDmaSetup: mode 0x48, data f788e000, count 200, lCh 1, dev 0 get Phys(PRD=b6e89058) get Phys(data[0]=f788e000) set TERM AtapiDmaSetup: OK IdeReadWrite: Lba 0x0, Count 0x1(0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0 Status 0x0 AtapiDmaStart: read on 0x1:0x0 IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b6e87da8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = TRUE perform generic check getting status... ATAPI status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:1, irql 0x16, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 AtapiInterrupt: Entered with status (0x50) AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb6e87da8, status 1 AtapiInterrupt: RequestComplete, srb 0xb6e87da8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:61) Deleting driver object '\Driver\CDFS' (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'pci' for critical device '*PNP0A03' (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/hal/halx86/legacy/halpnpdd.c:716) Start device received (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/fdo.c:571) Unknown IOCTL 0x9 (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/fdo.c:571) Unknown IOCTL 0x14 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'pci' for critical device 'PCI#CC_0604' (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'pci' for critical device 'PCI#CC_0604' (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'pci' for critical device 'PCI#CC_0604' (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbuhci' for critical device 'PCI#CC_0C0300' (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbuhci' for critical device 'PCI#CC_0C0300' (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbuhci' for critical device 'PCI#CC_0C0300' (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbuhci' for critical device 'PCI#CC_0C0300' (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbehci' for critical device 'PCI#CC_0C0320' (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'pci' for critical device 'PCI#CC_0604' (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/pdo.c:1267) Enabling command flags for PCI device 0x1 on bus 0x0: None (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/fdo.c:571) Unknown IOCTL 0x9 (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/fdo.c:571) Unknown IOCTL 0x14 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'VBE' for critical device 'PCI#CC_0300' (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/mm/ARM3/sysldr.c:2959) ZwOpenFile failed with status 0xc000003a (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/mm/ARM3/sysldr.c:2959) ZwOpenFile failed with status 0xc000003a (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/pdo.c:1267) Enabling command flags for PCI device 0x1c on bus 0x0: None (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/fdo.c:571) Unknown IOCTL 0x9 (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/fdo.c:571) Unknown IOCTL 0x14 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/pdo.c:1267) Enabling command flags for PCI device 0x3c on bus 0x0: None (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/fdo.c:571) Unknown IOCTL 0x9 (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/fdo.c:571) Unknown IOCTL 0x14 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/libusb.cpp:31) EHCI_AddDevice (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:160) CUSBHardwareDevice::Initialize (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/hal/halx86/legacy/bus/pcibus.c:690) HAL: No PCI Resource Adjustment done! Hardware may malfunction (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/pdo.c:1250) Assigning IRQ 3 to PCI device 0x1d on bus 0x0 (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/pdo.c:1267) Enabling command flags for PCI device 0x1d on bus 0x0: [Bus master] [I/O space enable] (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:246) CUSBHardwareDevice::PnpStart (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:290) UHCI Base 0000B000 Length ffff0020 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:598) [USBUHCI] InitializeController (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:626) [USBUHCI] LEGSUP f00 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:631) [USBUHCI] Acquired ownership (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:634) [USBUHCI] SBRN 10 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:564) Waiting 10 milliseconds for global reset (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:725) Index 0 QueueHead F788C000 LinkPhysical 14e022 ElementPhysical 1 PhysicalAddress 14e000 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:733) Index 1 QueueHead F788C020 LinkPhysical 14e042 ElementPhysical 1 PhysicalAddress 14e020 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:742) Index 2 QueueHead F788C040 LinkPhysical 14e062 ElementPhysical 1 PhysicalAddress 14e040 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:750) Index 3 QueueHead F788C060 LinkPhysical 14e082 ElementPhysical 1 PhysicalAddress 14e060 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:758) Index 4 QueueHead F788C080 LinkPhysical 1 ElementPhysical 1 PhysicalAddress 14e080 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:825) [USBUHCI] Controller initialized (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:374) Starting Controller (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:463) [USBUHCI] USBCMD: 80 USBSTS 20 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:481) [USBUHCI] Status 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:492) [USBUHCI] USBCMD: 81 USBSTS 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:523) [USBUHCI] Controller Started (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:524) [USBUHCI] Controller Status 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:525) [USBUHCI] Controller Cmd Status c1 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:526) [USBUHCI] Controller Interrupt Status d (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:527) [USBUHCI] Controller Frame 37 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:528) [USBUHCI] Controller Port Status 0 80 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:529) [USBUHCI] Controller Port Status 1 80 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:198) CHubController::Initialize (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3840) CHubController::CreatePDO: DeviceName \Device\USBPDO-0 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:556) [USBLIB] Name USB\ROOT_HUB&VID8086&PID27c8&REV0000 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbhub' for critical device 'USB#ROOT_HUB' (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3023) USBHI_QueryDeviceInformation B7150838 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1612) Status 0, Result 0x00000040 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1613) InformationLevel 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1614) ActualLength 40 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1615) PortNumber 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1616) DeviceDescriptor 20000112 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1617) HubAddress 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1618) NumberofPipes 0 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3208) USBHI_GetExtendedHubInformation (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1711) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 2 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3515) USBDI_IsDeviceHighSpeed (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:1152) [UHCI] SetPortFeature PortId 0 Feature 8 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:1152) [UHCI] SetPortFeature PortId 1 Feature 8 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:313) [USBLIB] SCE Request B7175110 TransferBufferLength 8 Flags 3 MDL 00000000 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:324) [USBLIB] Port 0: Status 100, Change 0 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:324) [USBLIB] Port 1: Status 100, Change 0 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/libusb.cpp:31) EHCI_AddDevice (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:160) CUSBHardwareDevice::Initialize (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/hal/halx86/legacy/bus/pcibus.c:690) HAL: No PCI Resource Adjustment done! Hardware may malfunction (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/pdo.c:1250) Assigning IRQ 5 to PCI device 0x3d on bus 0x0 (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/pdo.c:1267) Enabling command flags for PCI device 0x3d on bus 0x0: [Bus master] [I/O space enable] (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:246) CUSBHardwareDevice::PnpStart (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:290) UHCI Base 0000B080 Length ffff0020 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:598) [USBUHCI] InitializeController (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:626) [USBUHCI] LEGSUP f00 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:631) [USBUHCI] Acquired ownership (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:634) [USBUHCI] SBRN 10 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:564) Waiting 10 milliseconds for global reset (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:725) Index 0 QueueHead F7888000 LinkPhysical 152022 ElementPhysical 1 PhysicalAddress 152000 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:733) Index 1 QueueHead F7888020 LinkPhysical 152042 ElementPhysical 1 PhysicalAddress 152020 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:742) Index 2 QueueHead F7888040 LinkPhysical 152062 ElementPhysical 1 PhysicalAddress 152040 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:750) Index 3 QueueHead F7888060 LinkPhysical 152082 ElementPhysical 1 PhysicalAddress 152060 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:758) Index 4 QueueHead F7888080 LinkPhysical 1 ElementPhysical 1 PhysicalAddress 152080 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:825) [USBUHCI] Controller initialized (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:374) Starting Controller (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:463) [USBUHCI] USBCMD: 80 USBSTS 20 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:481) [USBUHCI] Status 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:492) [USBUHCI] USBCMD: 81 USBSTS 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:523) [USBUHCI] Controller Started (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:524) [USBUHCI] Controller Status 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:525) [USBUHCI] Controller Cmd Status c1 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:526) [USBUHCI] Controller Interrupt Status d (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:527) [USBUHCI] Controller Frame 37 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:528) [USBUHCI] Controller Port Status 0 80 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:529) [USBUHCI] Controller Port Status 1 80 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:198) CHubController::Initialize (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3840) CHubController::CreatePDO: DeviceName \Device\USBPDO-1 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:556) [USBLIB] Name USB\ROOT_HUB&VID8086&PID27c9&REV0000 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbhub' for critical device 'USB#ROOT_HUB' (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3023) USBHI_QueryDeviceInformation B6E84DF8 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1612) Status 0, Result 0x00000040 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1613) InformationLevel 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1614) ActualLength 40 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1615) PortNumber 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1616) DeviceDescriptor 20000112 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1617) HubAddress 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1618) NumberofPipes 0 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3208) USBHI_GetExtendedHubInformation (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1711) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 2 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3515) USBDI_IsDeviceHighSpeed (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:1152) [UHCI] SetPortFeature PortId 0 Feature 8 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:1152) [UHCI] SetPortFeature PortId 1 Feature 8 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:313) [USBLIB] SCE Request B6E87808 TransferBufferLength 8 Flags 3 MDL 00000000 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:324) [USBLIB] Port 0: Status 100, Change 0 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:324) [USBLIB] Port 1: Status 100, Change 0 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/libusb.cpp:31) EHCI_AddDevice (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:160) CUSBHardwareDevice::Initialize (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/hal/halx86/legacy/bus/pcibus.c:690) HAL: No PCI Resource Adjustment done! Hardware may malfunction (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/pdo.c:1250) Assigning IRQ 15 to PCI device 0x5d on bus 0x0 (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/pdo.c:1267) Enabling command flags for PCI device 0x5d on bus 0x0: [Bus master] [I/O space enable] (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:246) CUSBHardwareDevice::PnpStart (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:290) UHCI Base 0000B400 Length ffff0020 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:598) [USBUHCI] InitializeController (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:626) [USBUHCI] LEGSUP f00 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:631) [USBUHCI] Acquired ownership (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:634) [USBUHCI] SBRN 10 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:564) Waiting 10 milliseconds for global reset (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:725) Index 0 QueueHead F7884000 LinkPhysical 156022 ElementPhysical 1 PhysicalAddress 156000 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:733) Index 1 QueueHead F7884020 LinkPhysical 156042 ElementPhysical 1 PhysicalAddress 156020 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:742) Index 2 QueueHead F7884040 LinkPhysical 156062 ElementPhysical 1 PhysicalAddress 156040 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:750) Index 3 QueueHead F7884060 LinkPhysical 156082 ElementPhysical 1 PhysicalAddress 156060 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:758) Index 4 QueueHead F7884080 LinkPhysical 1 ElementPhysical 1 PhysicalAddress 156080 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:825) [USBUHCI] Controller initialized (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:374) Starting Controller (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:463) [USBUHCI] USBCMD: 80 USBSTS 20 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:481) [USBUHCI] Status 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:492) [USBUHCI] USBCMD: 81 USBSTS 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:523) [USBUHCI] Controller Started (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:524) [USBUHCI] Controller Status 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:525) [USBUHCI] Controller Cmd Status c1 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:526) [USBUHCI] Controller Interrupt Status d (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:527) [USBUHCI] Controller Frame 37 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:528) [USBUHCI] Controller Port Status 0 80 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:529) [USBUHCI] Controller Port Status 1 80 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:198) CHubController::Initialize (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3840) CHubController::CreatePDO: DeviceName \Device\USBPDO-2 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:556) [USBLIB] Name USB\ROOT_HUB&VID8086&PID27ca&REV0000 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbhub' for critical device 'USB#ROOT_HUB' (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3023) USBHI_QueryDeviceInformation B6E814C8 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1612) Status 0, Result 0x00000040 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1613) InformationLevel 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1614) ActualLength 40 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1615) PortNumber 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1616) DeviceDescriptor 20000112 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1617) HubAddress 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1618) NumberofPipes 0 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3208) USBHI_GetExtendedHubInformation (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1711) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 2 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3515) USBDI_IsDeviceHighSpeed (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:1152) [UHCI] SetPortFeature PortId 0 Feature 8 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:1152) [UHCI] SetPortFeature PortId 1 Feature 8 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:313) [USBLIB] SCE Request B715F820 TransferBufferLength 8 Flags 3 MDL 00000000 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:324) [USBLIB] Port 0: Status 100, Change 0 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:324) [USBLIB] Port 1: Status 100, Change 0 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/libusb.cpp:31) EHCI_AddDevice (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:160) CUSBHardwareDevice::Initialize (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/hal/halx86/legacy/bus/pcibus.c:690) HAL: No PCI Resource Adjustment done! Hardware may malfunction (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/pdo.c:1250) Assigning IRQ 10 to PCI device 0x7d on bus 0x0 (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/pdo.c:1267) Enabling command flags for PCI device 0x7d on bus 0x0: [Bus master] [I/O space enable] (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:246) CUSBHardwareDevice::PnpStart (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:290) UHCI Base 0000B480 Length ffff0020 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:598) [USBUHCI] InitializeController (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:626) [USBUHCI] LEGSUP f00 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:631) [USBUHCI] Acquired ownership (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:634) [USBUHCI] SBRN 10 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:564) Waiting 10 milliseconds for global reset (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:725) Index 0 QueueHead F7880000 LinkPhysical 15a022 ElementPhysical 1 PhysicalAddress 15a000 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:733) Index 1 QueueHead F7880020 LinkPhysical 15a042 ElementPhysical 1 PhysicalAddress 15a020 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:742) Index 2 QueueHead F7880040 LinkPhysical 15a062 ElementPhysical 1 PhysicalAddress 15a040 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:750) Index 3 QueueHead F7880060 LinkPhysical 15a082 ElementPhysical 1 PhysicalAddress 15a060 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:758) Index 4 QueueHead F7880080 LinkPhysical 1 ElementPhysical 1 PhysicalAddress 15a080 Request 0 NextElementDescriptor 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:825) [USBUHCI] Controller initialized (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:374) Starting Controller (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:463) [USBUHCI] USBCMD: 80 USBSTS 20 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:481) [USBUHCI] Status 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:492) [USBUHCI] USBCMD: 81 USBSTS 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:523) [USBUHCI] Controller Started (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:524) [USBUHCI] Controller Status 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:525) [USBUHCI] Controller Cmd Status c1 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:526) [USBUHCI] Controller Interrupt Status d (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:527) [USBUHCI] Controller Frame 37 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:528) [USBUHCI] Controller Port Status 0 80 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:529) [USBUHCI] Controller Port Status 1 80 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:198) CHubController::Initialize (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3840) CHubController::CreatePDO: DeviceName \Device\USBPDO-3 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:556) [USBLIB] Name USB\ROOT_HUB&VID8086&PID27cb&REV0000 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbhub' for critical device 'USB#ROOT_HUB' (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3023) USBHI_QueryDeviceInformation B6E7E130 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1612) Status 0, Result 0x00000040 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1613) InformationLevel 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1614) ActualLength 40 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1615) PortNumber 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1616) DeviceDescriptor 20000112 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1617) HubAddress 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1618) NumberofPipes 0 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3208) USBHI_GetExtendedHubInformation (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1711) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 2 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3515) USBDI_IsDeviceHighSpeed (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:1152) [UHCI] SetPortFeature PortId 0 Feature 8 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbuhci/hardware.cpp:1152) [UHCI] SetPortFeature PortId 1 Feature 8 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:313) [USBLIB] SCE Request B7157158 TransferBufferLength 8 Flags 3 MDL 00000000 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:324) [USBLIB] Port 0: Status 100, Change 0 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:324) [USBLIB] Port 1: Status 100, Change 0 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/libusb.cpp:31) EHCI_AddDevice (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/hal/halx86/legacy/bus/pcibus.c:690) HAL: No PCI Resource Adjustment done! Hardware may malfunction (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/pdo.c:1250) Assigning IRQ 3 to PCI device 0xfd on bus 0x0 (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/pdo.c:1267) Enabling command flags for PCI device 0xfd on bus 0x0: [Bus master] [Memory space enable] (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:359) Controller has 32 Length (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:360) Controller EHCI Version 100 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:361) Controller EHCI Caps HCSParamsLong 104208 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:362) Controller EHCI Caps HCCParamsLong 6871 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:363) Controller has 8 Ports (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:248) Controller Port Routing Rules 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:249) Number of Ports per Companion Controller 2 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:250) Number of Companion Controller 4 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:259) Controller has Debug Port Support At Port 1 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:264) Controller has Extended Capabilities Support (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:279) Controller uses 64-Bit Addressing (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:481) Starting Controller (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:555) [EHCI] Extended Caps Support detected! (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:706) Interrupt Mask 37 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:805) UsbSts c000 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:808) UsbCmd.PeriodicEnable 1 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:809) UsbCmd.AsyncEnable 1 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:810) UsbCmd.IntThreshold 8 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:811) UsbCmd.Run 1 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:812) UsbCmd.FrameListSize 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:819) EHCI Started! (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:198) CHubController::Initialize (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3840) CHubController::CreatePDO: DeviceName \Device\USBPDO-4 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:556) [USBLIB] Name USB\ROOT_HUB20&VID8086&PID27cc&REV0000 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbhub' for critical device 'USB#ROOT_HUB20' (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3023) USBHI_QueryDeviceInformation B6E7D500 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1612) Status 0, Result 0x00000040 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1613) InformationLevel 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1614) ActualLength 40 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1615) PortNumber 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1616) DeviceDescriptor 20000112 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1617) HubAddress 0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1618) NumberofPipes 0 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3208) USBHI_GetExtendedHubInformation (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbhub/fdo.c:1711) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 8 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:3515) USBDI_IsDeviceHighSpeed (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:313) [USBLIB] SCE Request B6F23CD0 TransferBufferLength 32 Flags 3 MDL 00000000 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:324) [USBLIB] Port 0: Status 100, Change 0 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:324) [USBLIB] Port 1: Status 100, Change 0 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:324) [USBLIB] Port 2: Status 100, Change 0 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:324) [USBLIB] Port 3: Status 100, Change 0 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:324) [USBLIB] Port 4: Status 100, Change 0 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:324) [USBLIB] Port 5: Status 100, Change 0 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:324) [USBLIB] Port 6: Status 100, Change 0 (/srv/buildbot_cmake/full_cmake/build/lib/drivers/libusb/hub_controller.cpp:324) [USBLIB] Port 7: Status 100, Change 0 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/driver.c:695) ZwOpenKey() failed with Status C0000034 (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/pdo.c:1267) Enabling command flags for PCI device 0x1e on bus 0x0: None (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/fdo.c:571) Unknown IOCTL 0x9 (/srv/buildbot_cmake/full_cmake/build/drivers/bus/pci/fdo.c:571) Unknown IOCTL 0x14 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/mm/ARM3/sysldr.c:2959) ZwOpenFile failed with status 0xc000003a TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e87250, CDB 0xb6e87280, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e87250 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78fa460 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtapiDmaSetup: mode 0x48, data f7879978, count 200, lCh 0, dev 0 get Phys(PRD=b6e89058) get Phys(data[0]=f7879978) set TERM AtapiDmaSetup: OK IdeReadWrite: Lba 0x0, Count 0x1(0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0 Status 0x0 AtapiDmaStart: read on 0x0:0x0 IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b6e87250 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 2) AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE perform generic check getting status... IDE status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:0, irql 0x16, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 AtapiInterrupt: Entered with status (0x50) AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb6e87250, status 1 AtapiInterrupt: RequestComplete, srb 0xb6e87250 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e87250, CDB 0xb6e87280, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e87250 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78fa338 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtapiDmaSetup: mode 0x48, data f7879000, count 200, lCh 0, dev 0 get Phys(PRD=b6e89058) get Phys(data[0]=f7879000) set TERM AtapiDmaSetup: OK IdeReadWrite: Lba 0x0, Count 0x1(0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0 Status 0x0 AtapiDmaStart: read on 0x0:0x0 IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b6e87250 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 2) AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE perform generic check getting status... IDE status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:0, irql 0x16, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 AtapiInterrupt: Entered with status (0x50) AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb6e87250, status 1 AtapiInterrupt: RequestComplete, srb 0xb6e87250 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e87250, CDB 0xb6e87280, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e87250 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78fa3a8 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtapiDmaSetup: mode 0x48, data f7879008, count 200, lCh 0, dev 0 get Phys(PRD=b6e89058) get Phys(data[0]=f7879008) set TERM AtapiDmaSetup: OK IdeReadWrite: Lba 0x0, Count 0x1(0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0 Status 0x0 AtapiDmaStart: read on 0x0:0x0 IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b6e87250 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 2) AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE perform generic check getting status... IDE status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:0, irql 0x16, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 AtapiInterrupt: Entered with status (0x50) AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb6e87250, status 1 AtapiInterrupt: RequestComplete, srb 0xb6e87250 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e87250, CDB 0xb6e87280, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e87250 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78fa4c0 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:1271) EHCI Status = 0xb ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtapiDmaSetup: mode 0x48, data f7879000, count 200, lCh 0, dev 0 get Phys(PRD=b6e89058) get Phys(data[0]=f7879000) set TERM AtapiDmaSetup: OK IdeReadWrite: Lba 0x0, Count 0x1(0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0 Status 0x0 AtapiDmaStart: read on 0x0:0x0 IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b6e87250 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 2) AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE perform generic check getting status... IDE status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:0, irql 0x16, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 AtapiInterrupt: Entered with status (0x50) AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb6e87250, status 1 AtapiInterrupt: RequestComplete, srb 0xb6e87250 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (/srv/buildbot_cmake/full_cmake/build/drivers/usb/usbehci/hardware.cpp:1317) CStatus b TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e87250, CDB 0xb6e87280, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e87250 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78fa530 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtapiDmaSetup: mode 0x48, data f7879978, count 200, lCh 0, dev 0 get Phys(PRD=b6e89058) get Phys(data[0]=f7879978) set TERM AtapiDmaSetup: OK IdeReadWrite: Lba 0x0, Count 0x1(0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0 Status 0x0 AtapiDmaStart: read on 0x0:0x0 IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b6e87250 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 2) AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE perform generic check getting status... IDE status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:0, irql 0x16, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 AtapiInterrupt: Entered with status (0x50) AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb6e87250, status 1 AtapiInterrupt: RequestComplete, srb 0xb6e87250 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e87da8, CDB 0xb6e87dd8, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e87da8 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78fa460 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtapiDmaSetup: mode 0x48, data f7879978, count 200, lCh 1, dev 0 get Phys(PRD=b6e89058) get Phys(data[0]=f7879978) set TERM AtapiDmaSetup: OK IdeReadWrite: Lba 0x0, Count 0x1(0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0 Status 0x0 AtapiDmaStart: read on 0x1:0x0 IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b6e87da8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = TRUE perform generic check getting status... ATAPI status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:1, irql 0x16, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 AtapiInterrupt: Entered with status (0x50) AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb6e87da8, status 1 AtapiInterrupt: RequestComplete, srb 0xb6e87da8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e87da8, CDB 0xb6e87dd8, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e87da8 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78fa338 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtapiDmaSetup: mode 0x48, data f7879000, count 200, lCh 1, dev 0 get Phys(PRD=b6e89058) get Phys(data[0]=f7879000) set TERM AtapiDmaSetup: OK IdeReadWrite: Lba 0x0, Count 0x1(0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0 Status 0x0 AtapiDmaStart: read on 0x1:0x0 IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b6e87da8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = TRUE perform generic check getting status... ATAPI status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:1, irql 0x16, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 AtapiInterrupt: Entered with status (0x50) AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb6e87da8, status 1 AtapiInterrupt: RequestComplete, srb 0xb6e87da8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e87da8, CDB 0xb6e87dd8, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e87da8 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78fa3a8 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtapiDmaSetup: mode 0x48, data f7879008, count 200, lCh 1, dev 0 get Phys(PRD=b6e89058) get Phys(data[0]=f7879008) set TERM AtapiDmaSetup: OK IdeReadWrite: Lba 0x0, Count 0x1(0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0 Status 0x0 AtapiDmaStart: read on 0x1:0x0 IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b6e87da8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = TRUE perform generic check getting status... ATAPI status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:1, irql 0x16, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 AtapiInterrupt: Entered with status (0x50) AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb6e87da8, status 1 AtapiInterrupt: RequestComplete, srb 0xb6e87da8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e87da8, CDB 0xb6e87dd8, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e87da8 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78fa4c0 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtapiDmaSetup: mode 0x48, data f7879000, count 200, lCh 1, dev 0 get Phys(PRD=b6e89058) get Phys(data[0]=f7879000) set TERM AtapiDmaSetup: OK IdeReadWrite: Lba 0x0, Count 0x1(0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0 Status 0x0 AtapiDmaStart: read on 0x1:0x0 IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b6e87da8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = TRUE perform generic check getting status... ATAPI status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:1, irql 0x16, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 AtapiInterrupt: Entered with status (0x50) AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb6e87da8, status 1 AtapiInterrupt: RequestComplete, srb 0xb6e87da8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e87da8, CDB 0xb6e87dd8, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e87da8 TopLevel (3), AtaReq 0xb6e89000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78fa530 ** Ide: Command AtaReq 0xb6e89000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtapiDmaSetup: mode 0x48, data f7879978, count 200, lCh 1, dev 0 get Phys(PRD=b6e89058) get Phys(data[0]=f7879978) set TERM AtapiDmaSetup: OK IdeReadWrite: Lba 0x0, Count 0x1(0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0 Status 0x0 AtapiDmaStart: read on 0x1:0x0 IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b6e87da8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = TRUE perform generic check getting status... ATAPI status 0x50 base status 0x50 AtapiDmaDone: dev -1 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x1:1, irql 0x16, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 AtapiInterrupt: Entered with status (0x50) AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb6e87da8, status 1 AtapiInterrupt: RequestComplete, srb 0xb6e87da8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e7d148, CDB 0xb6e7d178, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e7d148 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b6e7d178) AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f7879378, count 800, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f7879378) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b6e7d178 Command 0x28 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb b6e7d148 AtapiStartIo: query PORT for next request AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996848 AtapiResetController: pending SRB 0xb6e7d148, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 retry waiting DRQ, status 0xd0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur 1 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur 1 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: 1 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 1) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x50 base status 0x50 Unexpected interrupt. OurInterrupt = 0 AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e7d148, CDB 0xb6e7d178, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e7d148 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b6e7d178) AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f7879378, count 800, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f7879378) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b6e7d178 Command 0x28 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb b6e7d148 AtapiStartIo: query PORT for next request AtapiResetController(0) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 0 CompleteType 0x1, Luns 2, chan 0xb71608c8, sptr 0x80996840 ATA path, chan 0xb71608c8 disable intr (0) AtapiDisableInterrupts_0: 0 done send reset wait a little disable intr AtapiDisableInterrupts_0: 1 re-enable intr AtapiEnableInterrupts_0: 2 wait a little (2) done check DMA engine DMA status 0x0 process connected devices 0 - 1 Chan 0xb71608c8 Lun 0x0 Lun ptr 0xb6eda000 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb71608c8 Lun 0x1 Lun ptr 0xb6eda308 HDD at home CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found AtapiResetController: deviceExtension->chan[0].DisableIntr 1 -> 1 AtapiEnableInterrupts_0: 1 AtapiChipInit: dev 0xffffffff, ph chan 0, c 0 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 0 other Intel 0 -> 0/2 FindDevices: AtapiDisableInterrupts_0: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x0 FindDevices: select 0 dev on exit AtapiEnableInterrupts_0: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x0, dev 0 AtapiDisableInterrupts_0: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 49 AtaSetTransferMode: Set 0x48 on Device 0/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_0: 1 AtapiHwInitialize: lChannel 0x0, dev 1 AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996840 AtapiResetController: pending SRB 0xb6e7d148, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiResetController(2) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x50 base status 0x50 Unexpected interrupt. OurInterrupt = 0 AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e7d148, CDB 0xb6e7d178, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e7d148 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b6e7d178) AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f7879378, count 800, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f7879378) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b6e7d178 Command 0x28 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb b6e7d148 AtapiStartIo: query PORT for next request AtapiResetController(0) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 0 CompleteType 0x1, Luns 2, chan 0xb71608c8, sptr 0x80996840 ATA path, chan 0xb71608c8 disable intr (0) AtapiDisableInterrupts_0: 0 done send reset wait a little disable intr AtapiDisableInterrupts_0: 1 re-enable intr AtapiEnableInterrupts_0: 2 wait a little (2) done check DMA engine DMA status 0x0 process connected devices 0 - 1 Chan 0xb71608c8 Lun 0x0 Lun ptr 0xb6eda000 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb71608c8 Lun 0x1 Lun ptr 0xb6eda308 HDD at home CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found AtapiResetController: deviceExtension->chan[0].DisableIntr 1 -> 1 AtapiEnableInterrupts_0: 1 AtapiChipInit: dev 0xffffffff, ph chan 0, c 0 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 0 other Intel 0 -> 0/2 FindDevices: AtapiDisableInterrupts_0: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x0 FindDevices: select 0 dev on exit AtapiEnableInterrupts_0: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x0, dev 0 AtapiDisableInterrupts_0: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 49 AtaSetTransferMode: Set 0x48 on Device 0/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_0: 1 AtapiHwInitialize: lChannel 0x0, dev 1 AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996840 AtapiResetController: pending SRB 0xb6e7d148, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiResetController(2) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x50 base status 0x50 Unexpected interrupt. OurInterrupt = 0 AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e7d148, CDB 0xb6e7d178, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e7d148 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b6e7d178) AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f7879378, count 800, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f7879378) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b6e7d178 Command 0x28 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb b6e7d148 AtapiStartIo: query PORT for next request AtapiResetController(0) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 0 CompleteType 0x1, Luns 2, chan 0xb71608c8, sptr 0x80996840 ATA path, chan 0xb71608c8 disable intr (0) AtapiDisableInterrupts_0: 0 done send reset wait a little disable intr AtapiDisableInterrupts_0: 1 re-enable intr AtapiEnableInterrupts_0: 2 wait a little (2) done check DMA engine DMA status 0x0 process connected devices 0 - 1 Chan 0xb71608c8 Lun 0x0 Lun ptr 0xb6eda000 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb71608c8 Lun 0x1 Lun ptr 0xb6eda308 HDD at home CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found AtapiResetController: deviceExtension->chan[0].DisableIntr 1 -> 1 AtapiEnableInterrupts_0: 1 AtapiChipInit: dev 0xffffffff, ph chan 0, c 0 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 0 other Intel 0 -> 0/2 FindDevices: AtapiDisableInterrupts_0: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x0 FindDevices: select 0 dev on exit AtapiEnableInterrupts_0: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x0, dev 0 AtapiDisableInterrupts_0: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 49 AtaSetTransferMode: Set 0x48 on Device 0/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_0: 1 AtapiHwInitialize: lChannel 0x0, dev 1 AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996840 AtapiResetController: pending SRB 0xb6e7d148, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiResetController(2) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x50 base status 0x50 Unexpected interrupt. OurInterrupt = 0 AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e7d148, CDB 0xb6e7d178, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e7d148 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b6e7d178) AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f7879378, count 800, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f7879378) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b6e7d178 Command 0x28 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb b6e7d148 AtapiStartIo: query PORT for next request AtapiResetController(0) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 0 CompleteType 0x1, Luns 2, chan 0xb71608c8, sptr 0x80996840 ATA path, chan 0xb71608c8 disable intr (0) AtapiDisableInterrupts_0: 0 done send reset wait a little disable intr AtapiDisableInterrupts_0: 1 re-enable intr AtapiEnableInterrupts_0: 2 wait a little (2) done check DMA engine DMA status 0x0 process connected devices 0 - 1 Chan 0xb71608c8 Lun 0x0 Lun ptr 0xb6eda000 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb71608c8 Lun 0x1 Lun ptr 0xb6eda308 HDD at home CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found AtapiResetController: deviceExtension->chan[0].DisableIntr 1 -> 1 AtapiEnableInterrupts_0: 1 AtapiChipInit: dev 0xffffffff, ph chan 0, c 0 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 0 other Intel 0 -> 0/2 FindDevices: AtapiDisableInterrupts_0: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x0 FindDevices: select 0 dev on exit AtapiEnableInterrupts_0: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x0, dev 0 AtapiDisableInterrupts_0: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 49 AtaSetTransferMode: Set 0x48 on Device 0/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_0: 1 AtapiHwInitialize: lChannel 0x0, dev 1 AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996840 AtapiResetController: pending SRB 0xb6e7d148, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiResetController(2) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x50 base status 0x50 Unexpected interrupt. OurInterrupt = 0 AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e7d148, CDB 0xb6e7d178, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e7d148 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b6e7d178) AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f7879378, count 800, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f7879378) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b6e7d178 Command 0x28 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb b6e7d148 AtapiStartIo: query PORT for next request AtapiResetController(0) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 0 CompleteType 0x1, Luns 2, chan 0xb71608c8, sptr 0x80996840 ATA path, chan 0xb71608c8 disable intr (0) AtapiDisableInterrupts_0: 0 done send reset wait a little disable intr AtapiDisableInterrupts_0: 1 re-enable intr AtapiEnableInterrupts_0: 2 wait a little (2) done check DMA engine DMA status 0x0 process connected devices 0 - 1 Chan 0xb71608c8 Lun 0x0 Lun ptr 0xb6eda000 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb71608c8 Lun 0x1 Lun ptr 0xb6eda308 HDD at home CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found AtapiResetController: deviceExtension->chan[0].DisableIntr 1 -> 1 AtapiEnableInterrupts_0: 1 AtapiChipInit: dev 0xffffffff, ph chan 0, c 0 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 0 other Intel 0 -> 0/2 FindDevices: AtapiDisableInterrupts_0: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x0 FindDevices: select 0 dev on exit AtapiEnableInterrupts_0: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x0, dev 0 AtapiDisableInterrupts_0: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 49 AtaSetTransferMode: Set 0x48 on Device 0/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_0: 1 AtapiHwInitialize: lChannel 0x0, dev 1 AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996840 AtapiResetController: pending SRB 0xb6e7d148, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiResetController(2) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x50 base status 0x50 Unexpected interrupt. OurInterrupt = 0 AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e7d148, CDB 0xb6e7d178, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e7d148 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b6e7d178) AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f7879378, count 800, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f7879378) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b6e7d178 Command 0x28 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb b6e7d148 AtapiStartIo: query PORT for next request AtapiResetController(0) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 0 CompleteType 0x1, Luns 2, chan 0xb71608c8, sptr 0x80996840 ATA path, chan 0xb71608c8 disable intr (0) AtapiDisableInterrupts_0: 0 done send reset wait a little disable intr AtapiDisableInterrupts_0: 1 re-enable intr AtapiEnableInterrupts_0: 2 wait a little (2) done check DMA engine DMA status 0x0 process connected devices 0 - 1 Chan 0xb71608c8 Lun 0x0 Lun ptr 0xb6eda000 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb71608c8 Lun 0x1 Lun ptr 0xb6eda308 HDD at home CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found AtapiResetController: deviceExtension->chan[0].DisableIntr 1 -> 1 AtapiEnableInterrupts_0: 1 AtapiChipInit: dev 0xffffffff, ph chan 0, c 0 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 0 other Intel 0 -> 0/2 FindDevices: AtapiDisableInterrupts_0: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x0 FindDevices: select 0 dev on exit AtapiEnableInterrupts_0: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x0, dev 0 AtapiDisableInterrupts_0: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 49 AtaSetTransferMode: Set 0x48 on Device 0/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_0: 1 AtapiHwInitialize: lChannel 0x0, dev 1 AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996840 AtapiResetController: pending SRB 0xb6e7d148, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiResetController(2) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x50 base status 0x50 Unexpected interrupt. OurInterrupt = 0 AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e7d148, CDB 0xb6e7d178, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e7d148 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b6e7d178) AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f7879378, count 800, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f7879378) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b6e7d178 Command 0x28 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb b6e7d148 AtapiStartIo: query PORT for next request AtapiResetController(0) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 0 CompleteType 0x1, Luns 2, chan 0xb71608c8, sptr 0x80996840 ATA path, chan 0xb71608c8 disable intr (0) AtapiDisableInterrupts_0: 0 done send reset wait a little disable intr AtapiDisableInterrupts_0: 1 re-enable intr AtapiEnableInterrupts_0: 2 wait a little (2) done check DMA engine DMA status 0x0 process connected devices 0 - 1 Chan 0xb71608c8 Lun 0x0 Lun ptr 0xb6eda000 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb71608c8 Lun 0x1 Lun ptr 0xb6eda308 HDD at home CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found AtapiResetController: deviceExtension->chan[0].DisableIntr 1 -> 1 AtapiEnableInterrupts_0: 1 AtapiChipInit: dev 0xffffffff, ph chan 0, c 0 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 0 other Intel 0 -> 0/2 FindDevices: AtapiDisableInterrupts_0: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x0 FindDevices: select 0 dev on exit AtapiEnableInterrupts_0: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x0, dev 0 AtapiDisableInterrupts_0: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 49 AtaSetTransferMode: Set 0x48 on Device 0/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_0: 1 AtapiHwInitialize: lChannel 0x0, dev 1 AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996840 AtapiResetController: pending SRB 0xb6e7d148, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiResetController(2) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x50 base status 0x50 Unexpected interrupt. OurInterrupt = 0 AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e7d148, CDB 0xb6e7d178, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e7d148 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b6e7d178) AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f7879378, count 800, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f7879378) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b6e7d178 Command 0x28 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb b6e7d148 AtapiStartIo: query PORT for next request AtapiResetController(0) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 0 CompleteType 0x1, Luns 2, chan 0xb71608c8, sptr 0x80996840 ATA path, chan 0xb71608c8 disable intr (0) AtapiDisableInterrupts_0: 0 done send reset wait a little disable intr AtapiDisableInterrupts_0: 1 re-enable intr AtapiEnableInterrupts_0: 2 wait a little (2) done check DMA engine DMA status 0x0 process connected devices 0 - 1 Chan 0xb71608c8 Lun 0x0 Lun ptr 0xb6eda000 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb71608c8 Lun 0x1 Lun ptr 0xb6eda308 HDD at home CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found AtapiResetController: deviceExtension->chan[0].DisableIntr 1 -> 1 AtapiEnableInterrupts_0: 1 AtapiChipInit: dev 0xffffffff, ph chan 0, c 0 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 0 other Intel 0 -> 0/2 FindDevices: AtapiDisableInterrupts_0: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x0 FindDevices: select 0 dev on exit AtapiEnableInterrupts_0: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x0, dev 0 AtapiDisableInterrupts_0: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 49 AtaSetTransferMode: Set 0x48 on Device 0/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_0: 1 AtapiHwInitialize: lChannel 0x0, dev 1 AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996840 AtapiResetController: pending SRB 0xb6e7d148, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiResetController(2) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x50 base status 0x50 Unexpected interrupt. OurInterrupt = 0 AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e7d148, CDB 0xb6e7d178, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e7d148 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b6e7d178) AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f7879378, count 800, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f7879378) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b6e7d178 Command 0x28 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb b6e7d148 AtapiStartIo: query PORT for next request AtapiResetController(0) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 0 CompleteType 0x1, Luns 2, chan 0xb71608c8, sptr 0x80996840 ATA path, chan 0xb71608c8 disable intr (0) AtapiDisableInterrupts_0: 0 done send reset wait a little disable intr AtapiDisableInterrupts_0: 1 re-enable intr AtapiEnableInterrupts_0: 2 wait a little (2) done check DMA engine DMA status 0x0 process connected devices 0 - 1 Chan 0xb71608c8 Lun 0x0 Lun ptr 0xb6eda000 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb71608c8 Lun 0x1 Lun ptr 0xb6eda308 HDD at home CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found AtapiResetController: deviceExtension->chan[0].DisableIntr 1 -> 1 AtapiEnableInterrupts_0: 1 AtapiChipInit: dev 0xffffffff, ph chan 0, c 0 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 0 other Intel 0 -> 0/2 FindDevices: AtapiDisableInterrupts_0: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x0 FindDevices: select 0 dev on exit AtapiEnableInterrupts_0: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x0, dev 0 AtapiDisableInterrupts_0: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 49 AtaSetTransferMode: Set 0x48 on Device 0/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_0: 1 AtapiHwInitialize: lChannel 0x0, dev 1 AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996840 AtapiResetController: pending SRB 0xb6e7d148, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiResetController(2) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x50 base status 0x50 Unexpected interrupt. OurInterrupt = 0 AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e7d148, CDB 0xb6e7d178, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e7d148 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b6e7d178) AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f7879378, count 800, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f7879378) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b6e7d178 Command 0x28 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb b6e7d148 AtapiStartIo: query PORT for next request AtapiResetController(0) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 0 CompleteType 0x1, Luns 2, chan 0xb71608c8, sptr 0x80996840 ATA path, chan 0xb71608c8 disable intr (0) AtapiDisableInterrupts_0: 0 done send reset wait a little disable intr AtapiDisableInterrupts_0: 1 re-enable intr AtapiEnableInterrupts_0: 2 wait a little (2) done check DMA engine DMA status 0x0 process connected devices 0 - 1 Chan 0xb71608c8 Lun 0x0 Lun ptr 0xb6eda000 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb71608c8 Lun 0x1 Lun ptr 0xb6eda308 HDD at home CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found AtapiResetController: deviceExtension->chan[0].DisableIntr 1 -> 1 AtapiEnableInterrupts_0: 1 AtapiChipInit: dev 0xffffffff, ph chan 0, c 0 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 0 other Intel 0 -> 0/2 FindDevices: AtapiDisableInterrupts_0: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x0 FindDevices: select 0 dev on exit AtapiEnableInterrupts_0: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x0, dev 0 AtapiDisableInterrupts_0: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 49 AtaSetTransferMode: Set 0x48 on Device 0/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_0: 1 AtapiHwInitialize: lChannel 0x0, dev 1 AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996840 AtapiResetController: pending SRB 0xb6e7d148, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiResetController(2) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x50 base status 0x50 Unexpected interrupt. OurInterrupt = 0 AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e7d148, CDB 0xb6e7d178, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e7d148 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b6e7d178) AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f7879378, count 800, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f7879378) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b6e7d178 Command 0x28 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb b6e7d148 AtapiStartIo: query PORT for next request AtapiResetController(0) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 0 CompleteType 0x1, Luns 2, chan 0xb71608c8, sptr 0x80996840 ATA path, chan 0xb71608c8 disable intr (0) AtapiDisableInterrupts_0: 0 done send reset wait a little disable intr AtapiDisableInterrupts_0: 1 re-enable intr AtapiEnableInterrupts_0: 2 wait a little (2) done check DMA engine DMA status 0x0 process connected devices 0 - 1 Chan 0xb71608c8 Lun 0x0 Lun ptr 0xb6eda000 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb71608c8 Lun 0x1 Lun ptr 0xb6eda308 HDD at home CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found AtapiResetController: deviceExtension->chan[0].DisableIntr 1 -> 1 AtapiEnableInterrupts_0: 1 AtapiChipInit: dev 0xffffffff, ph chan 0, c 0 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 0 other Intel 0 -> 0/2 FindDevices: AtapiDisableInterrupts_0: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x0 FindDevices: select 0 dev on exit AtapiEnableInterrupts_0: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x0, dev 0 AtapiDisableInterrupts_0: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 49 AtaSetTransferMode: Set 0x48 on Device 0/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_0: 1 AtapiHwInitialize: lChannel 0x0, dev 1 AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996840 AtapiResetController: pending SRB 0xb6e7d148, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiResetController(2) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x50 base status 0x50 Unexpected interrupt. OurInterrupt = 0 AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e7d148, CDB 0xb6e7d178, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e7d148 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b6e7d178) AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f7879378, count 800, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f7879378) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b6e7d178 Command 0x28 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb b6e7d148 AtapiStartIo: query PORT for next request AtapiResetController(0) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 0 CompleteType 0x1, Luns 2, chan 0xb71608c8, sptr 0x80996840 ATA path, chan 0xb71608c8 disable intr (0) AtapiDisableInterrupts_0: 0 done send reset wait a little disable intr AtapiDisableInterrupts_0: 1 re-enable intr AtapiEnableInterrupts_0: 2 wait a little (2) done check DMA engine DMA status 0x0 process connected devices 0 - 1 Chan 0xb71608c8 Lun 0x0 Lun ptr 0xb6eda000 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb71608c8 Lun 0x1 Lun ptr 0xb6eda308 HDD at home CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found AtapiResetController: deviceExtension->chan[0].DisableIntr 1 -> 1 AtapiEnableInterrupts_0: 1 AtapiChipInit: dev 0xffffffff, ph chan 0, c 0 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 0 other Intel 0 -> 0/2 FindDevices: AtapiDisableInterrupts_0: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x0 FindDevices: select 0 dev on exit AtapiEnableInterrupts_0: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x0, dev 0 AtapiDisableInterrupts_0: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 49 AtaSetTransferMode: Set 0x48 on Device 0/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_0: 1 AtapiHwInitialize: lChannel 0x0, dev 1 AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996840 AtapiResetController: pending SRB 0xb6e7d148, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiResetController(2) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x50 base status 0x50 Unexpected interrupt. OurInterrupt = 0 AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e7d148, CDB 0xb6e7d178, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e7d148 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b6e7d178) AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f7879378, count 800, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f7879378) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b6e7d178 Command 0x28 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb b6e7d148 AtapiStartIo: query PORT for next request AtapiResetController(0) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 0 CompleteType 0x1, Luns 2, chan 0xb71608c8, sptr 0x80996840 ATA path, chan 0xb71608c8 disable intr (0) AtapiDisableInterrupts_0: 0 done send reset wait a little disable intr AtapiDisableInterrupts_0: 1 re-enable intr AtapiEnableInterrupts_0: 2 wait a little (2) done check DMA engine DMA status 0x0 process connected devices 0 - 1 Chan 0xb71608c8 Lun 0x0 Lun ptr 0xb6eda000 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb71608c8 Lun 0x1 Lun ptr 0xb6eda308 HDD at home CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found AtapiResetController: deviceExtension->chan[0].DisableIntr 1 -> 1 AtapiEnableInterrupts_0: 1 AtapiChipInit: dev 0xffffffff, ph chan 0, c 0 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 0 other Intel 0 -> 0/2 FindDevices: AtapiDisableInterrupts_0: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x0 FindDevices: select 0 dev on exit AtapiEnableInterrupts_0: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x0, dev 0 AtapiDisableInterrupts_0: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 49 AtaSetTransferMode: Set 0x48 on Device 0/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_0: 1 AtapiHwInitialize: lChannel 0x0, dev 1 AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996840 AtapiResetController: pending SRB 0xb6e7d148, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiResetController(2) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x50 base status 0x50 Unexpected interrupt. OurInterrupt = 0 AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x27c08086/0x1 SRB 0xb6e7d148, CDB 0xb6e7d178, AtaReq 0xb6e89000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb6e7d148 TopLevel (3), AtaReq 0xb6e89000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b6e7d178) AtapiSendCommand: force use dma (ahci) AtapiDmaSetup: mode 0x45, data f7879378, count 800, lCh 1, dev 1 get Phys(PRD=b6e89058) get Phys(data[0]=f7879378) set TERM AtapiDmaSetup: OK AtapiSendCommand: use dma AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b6e7d178 Command 0x28 to TargetId 1 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiDmaStart: read on 0x1:0x1 AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiStartIo: next Srb b6e7d148 AtapiStartIo: query PORT for next request AtapiResetController(0) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 0 CompleteType 0x1, Luns 2, chan 0xb71608c8, sptr 0x80996840 ATA path, chan 0xb71608c8 disable intr (0) AtapiDisableInterrupts_0: 0 done send reset wait a little disable intr AtapiDisableInterrupts_0: 1 re-enable intr AtapiEnableInterrupts_0: 2 wait a little (2) done check DMA engine DMA status 0x0 process connected devices 0 - 1 Chan 0xb71608c8 Lun 0x0 Lun ptr 0xb6eda000 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb71608c8 Lun 0x1 Lun ptr 0xb6eda308 HDD at home CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found AtapiResetController: deviceExtension->chan[0].DisableIntr 1 -> 1 AtapiEnableInterrupts_0: 1 AtapiChipInit: dev 0xffffffff, ph chan 0, c 0 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 0 other Intel 0 -> 0/2 FindDevices: AtapiDisableInterrupts_0: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AAXK0-10AC FW: 510. S/N: W -DCWYAHU468082 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x170e OrigTransferMode: 49, Active: 49 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda000 S/N:WDC_WD5000AAKX-001CA0___________________-_____WD-WCAYUH640828 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 1 HDD at home HDD at home CheckDevice: status 0x0 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x0 FindDevices: select 0 dev on exit AtapiEnableInterrupts_0: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x0, dev 0 AtapiDisableInterrupts_0: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 49 AtaSetTransferMode: Set 0x48 on Device 0/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_0: 1 AtapiHwInitialize: lChannel 0x0, dev 1 AtapiResetController(1) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiResetController: Reset channel 1 CompleteType 0x1, Luns 2, chan 0xb7160b30, sptr 0x80996840 AtapiResetController: pending SRB 0xb6e7d148, chan 0xb7160b30 senseBuffer 0xb6e8a000, chan 0xb7160b30 AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET chan 0xb7160b30 ATA path, chan 0xb7160b30 disable intr (0) AtapiDisableInterrupts_1: 0 done send reset wait a little disable intr AtapiDisableInterrupts_1: 1 re-enable intr AtapiEnableInterrupts_1: 2 wait a little (2) done check DMA engine DMA status 0x0 AtapiDmaDone: dev 0 process connected devices 0 - 1 Chan 0xb7160b30 Lun 0x0 Lun ptr 0xb6eda610 HDD at home IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) Chan 0xb7160b30 Lun 0x1 Lun ptr 0xb6eda918 HDD at home AtapiResetController: Status before Atapi reset (0x0). AtapiDisableInterrupts_1: 1 AtapiSoftReset: statusByte2 0: DMA status 0x0 AtapiEnableInterrupts_1: 2 IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) AtapiResetController: deviceExtension->chan[1].DisableIntr 1 -> 1 AtapiEnableInterrupts_1: 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x10001000 VendorID/DeviceID/Rev 0x8086/0x27c0/0x1 Intel SATA channel init reg 90: 0, init lun map chan 1 other Intel 0 -> 1/3 FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x4 clear unexpected DMA intr on ATAPI reset AtapiDmaDone: dev 0 HDD at home HDD at home CheckDevice: status 0x51 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x50) AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: DW CDW0500AASJ5-A5B8 FW: 100. S/N: W -DMWSA5Y935860 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 44, CAPs 0x706 OrigTransferMode: 48, Active: 48 Accoustic 128, cur 128 AdvPowerMode 0, cur -1223294284 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1fe UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93d NativeNumOfSectors 0x3a386030 Update NumOfSectors to 0x3a386030 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 Status 0x50 Read high order bytes NativeNumOfSectors 0x3a38602f requested LunExt->GeomType=0 tmp_cylinders = 0xec93d Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb6eda610 S/N:WDC_WD5000AAJS-55A8B0___________________-_____WD-WMASY5398506 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x0 is IDE CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x0 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: pOitra cVD DWRA -D25 FW: .190 S/N: Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 20/3f SATA: 40 SATA support: 48, CAPs 0x602 OrigTransferMode: 47, Active: 47 Accoustic 0, cur 0 AdvPowerMode 0, cur -1223294284 InitBadBlocks local LunExt 0xb6eda918 S/N:Optiarc_DVD_RW_AD-5200S_________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: Device 0x1 is ATAPI CheckDevice: check status: found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 0 dev on exit AtapiEnableInterrupts_1: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 AtapiHwInitialize: IDE branch AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0 Status 0x50 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16 Try Enable Read Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa Status 0x50 Try Enable Write Cache AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2 Status 0x50 Try Enable Adv. Power Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x5 Status 0x51 AtapiHwInitialize: Enable APM on Device 0 failed Try Enable Acoustic Mgmt AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42 Status 0x50 Try init standby timer: -1223294284 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xe3, lba 0x0 count 0x0 feature 0x0 Status 0x50 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x50 Using 0x48 mode AtapiEnableInterrupts_1: 1 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiDisableInterrupts_1: 0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 1 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x5 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 47 AtaSetTransferMode: Set 0x47 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x46 feature 0x3 Status 0x51 wait ready after error AtaSetTransferMode: Set 0x45 on Device 1/1 AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x45 feature 0x3 Status 0x50 Using 0x45 mode AtapiEnableInterrupts_1: 1 AtapiResetController(2) AtapiResetController: Reset IDE 0x8086/0x27c0 @ 0x5f simplexOnly 0 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x27c08086/0x1 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x1 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE DMA status 0x4 perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x50 base status 0x50 Unexpected interrupt. ATAPI additional check AtapiCheckInterrupt__: ATAPI int reason 0 AtapiInterrupt(base): Catch unexpected AtapiInterrupt(base): cntrlr 0x1 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 perform generic check getting status... IDE status 0x50 base status 0x50 Unexpected interrupt. OurInterrupt = 0 AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x1 (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/io/iomgr/iomgr.c:526) IopCreateArcNames failed: c0000034 *** Fatal System Error: 0x00000069 (0x00000000,0x00000000,0x00000000,0x00000000)  Entered debugger on embedded INT3 at 0x0008:0x809257f8. kdb:> bt Eip: Frames: <0000000e> Couldn't access memory at 0x00097A38! kdb:> thread list TID State Prior. Affinity EBP EIP *0x00000008 Running 31 0x00000001 0x00000000 0x00000000 0x0000000c Waiting 13 0x00000001 0xb71532c0 0x00000000 0x00000010 Waiting 13 0x00000001 0xb7152020 0x00000000 0x00000014 Waiting 13 0x00000001 0xb7152db0 0x00000000 0x00000018 Waiting 13 0x00000001 0xb7152b40 0x00000000 0x0000001c Waiting 13 0x00000001 0xb71523f0 0x00000000 0x00000020 Waiting 12 0x00000001 0xb7152660 0x00000000 0x00000024 Waiting 12 0x00000001 0xb71523f0 0x00000000 0x00000028 Waiting 12 0x00000001 0x00000000 0x00000000 0x0000002c Waiting 15 0x00000001 0xb7153530 0x00000000 0x00000030 Ready 14 0x00000001 0x00000000 0x00000000 0x00000034 Ready 17 0x00000001 0xb6f25020 0x00000000 0x00000038 Ready 27 0x00000001 0x0000009b 0x00000000 0x0000003c Ready 16 0x00000001 0x00000000 0x00000000 kdb:> disasm : ret $0x4 : push %ebp : mov %esp,%ebp : mov 0x10(%ebp),%eax : mov 0x8(%ebp),%ecx : mov 0xc(%ebp),%edx : int $0x2d : int3 : pop %ebp : ret $0xc kdb:>