@’ÁDÕÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÕÿÿÿÿ(../../ntoskrnl/kd/kdio.c:375) ----------------------------------------------------- (../../ntoskrnl/kd/kdio.c:376) ReactOS 0.4-SVN (Build 20130210-r58309) (../../ntoskrnl/kd/kdio.c:378) 1 System Processor [3327 MB Memory] (../../ntoskrnl/kd/kdio.c:379) Command Line: DEBUG DEBUGPORT=COM1 BAUDRATE=115200 SOS (../../ntoskrnl/kd/kdio.c:383) ARC Paths: multi(0)disk(0)rdisk(0)partition(1) \ multi(0)disk(0)rdisk(0)partition(1) \ReactOS\ (../../ntoskrnl/ke/i386/cpu.c:494) Supported CPU features : KF_V86_VIS KF_RDTSC KF_CR4 KF_CMOV KF_GLOBAL_PAGE KF_LARGE_PAGE KF_MTRR KF_CMPXCHG8B KF_MMX KF_WORKING_PTE KF_PAT KF_FXSR KF_FAST_SYSCALL KF_XMMI KF_XMMI64 KF_DTS KF_NX_BIT (../../ntoskrnl/ke/i386/cpu.c:801) Prefetch Cache: 64 bytes L2 Cache: 0 bytes L2 Cache Line: 64 bytes L2 Cache Associativity: 0 (../../hal/halx86/acpi/halacpi.c:782) ACPI Timer at: 808h (EXT: 0) (../../hal/halx86/acpi/halacpi.c:890) ACPI 2.0 Detected. Tables: [RSDT] [FACP] (../../ntoskrnl/mm/ARM3/expool.c:930) EXPOOL: Pool Tracker Table at: 0xB7B01000 with 0xe01c bytes (../../ntoskrnl/mm/ARM3/expool.c:932) EXPOOL: Big Pool Tracker Table at: 0xB7AF1000 with 0x10000 bytes (../../ntoskrnl/mm/ARM3/mminit.c:1433) HAL I/O Mapping at FFFE0000 is unsafe (../../ntoskrnl/mm/mminit.c:262) 0x80000000 - 0x82400000 Boot Loaded Image (../../ntoskrnl/mm/mminit.c:266) 0xB0000000 - 0xB1380000 PFN Database (../../ntoskrnl/mm/mminit.c:270) 0xB1380000 - 0xB7B10000 ARM3 Non Paged Pool (../../ntoskrnl/mm/mminit.c:274) 0xBB000000 - 0xBD000000 System View Space (../../ntoskrnl/mm/mminit.c:278) 0xBD000000 - 0xC0000000 Session Space (../../ntoskrnl/mm/mminit.c:281) 0xC0000000 - 0xC03FFFFF Page Tables (../../ntoskrnl/mm/mminit.c:284) 0xC0300000 - 0xC0300FFF Page Directories (../../ntoskrnl/mm/mminit.c:287) 0xC0400000 - 0xC07FFFFF Hyperspace (../../ntoskrnl/mm/mminit.c:291) 0xE1000000 - 0xECC00000 ARM3 Paged Pool (../../ntoskrnl/mm/mminit.c:294) 0xECC00000 - 0xF7BE0000 System PTE Space (../../ntoskrnl/mm/mminit.c:297) 0xF7BE0000 - 0xFFBE0000 Non Paged Pool Expansion PTE Space ACPI Compatible Eisa/Isa HAL Detected (../../ntoskrnl/io/pnpmgr/pnpmgr.c:3188) Firmware mapper is disabled (../../ntoskrnl/io/pnpmgr/pnpreport.c:353) Reported device: DETECTEDInternal\ACPI_HAL (Root\ACPI_HAL\0) (../../hal/halx86/legacy/bus/pcibus.c:715) WARNING: PCI Slot Resource Assignment is FOOBAR (../../hal/halx86/legacy/bus/pcibus.c:715) WARNING: PCI Slot Resource Assignment is FOOBAR (../../hal/halx86/legacy/bus/pcibus.c:715) WARNING: PCI Slot Resource Assignment is FOOBAR (../../ntoskrnl/io/iomgr/driver.c:1582) '\Driver\BUSLOGIC' initialization failed, status (0xc00000c0) (../../ntoskrnl/io/iomgr/driver.c:61) Deleting driver object '\Driver\BUSLOGIC' (../../drivers/bus/acpi/busmgr/bus.c:1202) Using HPET hack (../../drivers/bus/acpi/acpienum.c:70) Detected duplicate device: PNP0C02 0 (../../drivers/bus/acpi/acpienum.c:70) Detected duplicate device: PNP0C02 1 (../../drivers/bus/acpi/acpienum.c:70) Detected duplicate device: PNP0C0F 0 (../../drivers/bus/acpi/acpienum.c:70) Detected duplicate device: PNP0C0F 0 (../../drivers/bus/acpi/acpienum.c:70) Detected duplicate device: PNP0C0F 0 (../../drivers/bus/acpi/acpienum.c:70) Detected duplicate device: PNP0C0F 0 (../../drivers/bus/acpi/acpienum.c:70) Detected duplicate device: PNP0C0F 0 (../../drivers/bus/acpi/acpienum.c:70) Detected duplicate device: PNP0C0F 0 (../../drivers/bus/acpi/buspdo.c:692) Using _BBN for bus number (../../drivers/bus/acpi/buspdo.c:695) Found PCI root hub: 0 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../drivers/bus/pci/fdo.c:571) Unknown IOCTL 0x9 (../../drivers/bus/pci/fdo.c:571) Unknown IOCTL 0x14 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../drivers/bus/pci/pdo.c:1267) Enabling command flags for PCI device 0x1 on bus 0x0: None (../../drivers/bus/pci/fdo.c:571) Unknown IOCTL 0x9 (../../drivers/bus/pci/fdo.c:571) Unknown IOCTL 0x14 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../ntoskrnl/mm/ARM3/sysldr.c:2961) ZwOpenFile failed for '\SystemRoot\system32\drivers\vbemp.sys' with status 0xc000003a (../../ntoskrnl/mm/ARM3/sysldr.c:2961) ZwOpenFile failed for '\SystemRoot\system32\drivers\vbemp.sys' with status 0xc000003a (../../lib/drivers/libusb/libusb.cpp:31) USBLIB_AddDevice (../../drivers/usb/usbuhci/hardware.cpp:168) CUSBHardwareDevice::Initialize (../../drivers/bus/pci/pdo.c:1250) Assigning IRQ 10 to PCI device 0x1a on bus 0x0 (../../drivers/bus/pci/pdo.c:1267) Enabling command flags for PCI device 0x1a on bus 0x0: [Bus master] [I/O space enable] (../../drivers/usb/usbuhci/hardware.cpp:254) CUSBHardwareDevice::PnpStart (../../drivers/usb/usbuhci/hardware.cpp:298) UHCI Base 0000A800 Length ffff0020 (../../drivers/usb/usbuhci/hardware.cpp:606) [USBUHCI] InitializeController (../../drivers/usb/usbuhci/hardware.cpp:634) [USBUHCI] LEGSUP f00 (../../drivers/usb/usbuhci/hardware.cpp:639) [USBUHCI] Acquired ownership (../../drivers/usb/usbuhci/hardware.cpp:642) [USBUHCI] SBRN 10 (../../drivers/usb/usbuhci/hardware.cpp:572) Waiting 10 milliseconds for global reset (../../drivers/usb/usbuhci/hardware.cpp:733) Index 0 QueueHead F789A000 LinkPhysical 1af022 ElementPhysical 1 PhysicalAddress 1af000 Request 0 NextElementDescriptor 0 (../../drivers/usb/usbuhci/hardware.cpp:741) Index 1 QueueHead F789A020 LinkPhysical 1af042 ElementPhysical 1 PhysicalAddress 1af020 Request 0 NextElementDescriptor 0 (../../drivers/usb/usbuhci/hardware.cpp:750) Index 2 QueueHead F789A040 LinkPhysical 1af062 ElementPhysical 1 PhysicalAddress 1af040 Request 0 NextElementDescriptor 0 (../../drivers/usb/usbuhci/hardware.cpp:758) Index 3 QueueHead F789A060 LinkPhysical 1af082 ElementPhysical 1 PhysicalAddress 1af060 Request 0 NextElementDescriptor 0 (../../drivers/usb/usbuhci/hardware.cpp:766) Index 4 QueueHead F789A080 LinkPhysical 1 ElementPhysical 1 PhysicalAddress 1af080 Request 0 NextElementDescriptor 0 (../../drivers/usb/usbuhci/hardware.cpp:833) [USBUHCI] Controller initialized (../../drivers/usb/usbuhci/hardware.cpp:382) Starting Controller (../../drivers/usb/usbuhci/hardware.cpp:471) [USBUHCI] USBCMD: 80 USBSTS 20 (../../drivers/usb/usbuhci/hardware.cpp:489) [USBUHCI] Status 0 (../../drivers/usb/usbuhci/hardware.cpp:500) [USBUHCI] USBCMD: 81 USBSTS 0 (../../drivers/usb/usbuhci/hardware.cpp:531) [USBUHCI] Controller Started (../../drivers/usb/usbuhci/hardware.cpp:532) [USBUHCI] Controller Status 0 (../../drivers/usb/usbuhci/hardware.cpp:533) [USBUHCI] Controller Cmd Status c1 (../../drivers/usb/usbuhci/hardware.cpp:534) [USBUHCI] Controller Interrupt Status d (../../drivers/usb/usbuhci/hardware.cpp:535) [USBUHCI] Controller Frame 27 (../../drivers/usb/usbuhci/hardware.cpp:536) [USBUHCI] Controller Port Status 0 80 (../../drivers/usb/usbuhci/hardware.cpp:537) [USBUHCI] Controller Port Status 1 80 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../lib/drivers/libusb/hub_controller.cpp:3900) CHubController::CreatePDO: DeviceName \Device\USBPDO-0 (../../lib/drivers/libusb/hub_controller.cpp:556) [USBUHCI] Name USB\ROOT_HUB&VID8086&PID3a37&REV0000 (../../drivers/usb/usbhub/fdo.c:1638) Status 0, Result 0x00000040 (../../drivers/usb/usbhub/fdo.c:1639) InformationLevel 0 (../../drivers/usb/usbhub/fdo.c:1640) ActualLength 40 (../../drivers/usb/usbhub/fdo.c:1641) PortNumber 0 (../../drivers/usb/usbhub/fdo.c:1642) DeviceDescriptor 20000112 (../../drivers/usb/usbhub/fdo.c:1643) HubAddress 0 (../../drivers/usb/usbhub/fdo.c:1644) NumberofPipes 0 (../../drivers/usb/usbhub/fdo.c:1737) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 2 (../../drivers/usb/usbuhci/hardware.cpp:1160) [UHCI] SetPortFeature PortId 0 Feature 8 (../../drivers/usb/usbuhci/hardware.cpp:1160) [UHCI] SetPortFeature PortId 1 Feature 8 (../../lib/drivers/libusb/hub_controller.cpp:313) [USBUHCI] SCE Request B77ACF80 TransferBufferLength 8 Flags 3 MDL 00000000 (../../lib/drivers/libusb/hub_controller.cpp:324) [USBUHCI] Port 0: Status 100, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:324) [USBUHCI] Port 1: Status 100, Change 0 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../lib/drivers/libusb/libusb.cpp:31) USBLIB_AddDevice (../../drivers/usb/usbuhci/hardware.cpp:168) CUSBHardwareDevice::Initialize (../../drivers/bus/pci/pdo.c:1250) Assigning IRQ 14 to PCI device 0x3a on bus 0x0 (../../drivers/bus/pci/pdo.c:1267) Enabling command flags for PCI device 0x3a on bus 0x0: [Bus master] [I/O space enable] (../../drivers/usb/usbuhci/hardware.cpp:254) CUSBHardwareDevice::PnpStart (../../drivers/usb/usbuhci/hardware.cpp:298) UHCI Base 0000A880 Length ffff0020 (../../drivers/usb/usbuhci/hardware.cpp:606) [USBUHCI] InitializeController (../../drivers/usb/usbuhci/hardware.cpp:634) [USBUHCI] LEGSUP f00 (../../drivers/usb/usbuhci/hardware.cpp:639) [USBUHCI] Acquired ownership (../../drivers/usb/usbuhci/hardware.cpp:642) [USBUHCI] SBRN 10 (../../drivers/usb/usbuhci/hardware.cpp:572) Waiting 10 milliseconds for global reset (../../drivers/usb/usbuhci/hardware.cpp:733) Index 0 QueueHead F7896000 LinkPhysical 1b3022 ElementPhysical 1 PhysicalAddress 1b3000 Request 0 NextElementDescriptor 0 (../../drivers/usb/usbuhci/hardware.cpp:741) Index 1 QueueHead F7896020 LinkPhysical 1b3042 ElementPhysical 1 PhysicalAddress 1b3020 Request 0 NextElementDescriptor 0 (../../drivers/usb/usbuhci/hardware.cpp:750) Index 2 QueueHead F7896040 LinkPhysical 1b3062 ElementPhysical 1 PhysicalAddress 1b3040 Request 0 NextElementDescriptor 0 (../../drivers/usb/usbuhci/hardware.cpp:758) Index 3 QueueHead F7896060 LinkPhysical 1b3082 ElementPhysical 1 PhysicalAddress 1b3060 Request 0 NextElementDescriptor 0 (../../drivers/usb/usbuhci/hardware.cpp:766) Index 4 QueueHead F7896080 LinkPhysical 1 ElementPhysical 1 PhysicalAddress 1b3080 Request 0 NextElementDescriptor 0 (../../drivers/usb/usbuhci/hardware.cpp:833) [USBUHCI] Controller initialized (../../drivers/usb/usbuhci/hardware.cpp:382) Starting Controller (../../drivers/usb/usbuhci/hardware.cpp:471) [USBUHCI] USBCMD: 80 USBSTS 20 (../../drivers/usb/usbuhci/hardware.cpp:489) [USBUHCI] Status 0 (../../drivers/usb/usbuhci/hardware.cpp:500) [USBUHCI] USBCMD: 81 USBSTS 0 (../../drivers/usb/usbuhci/hardware.cpp:531) [USBUHCI] Controller Started (../../drivers/usb/usbuhci/hardware.cpp:532) [USBUHCI] Controller Status 0 (../../drivers/usb/usbuhci/hardware.cpp:533) [USBUHCI] Controller Cmd Status c1 (../../drivers/usb/usbuhci/hardware.cpp:534) [USBUHCI] Controller Interrupt Status d (../../drivers/usb/usbuhci/hardware.cpp:535) [USBUHCI] Controller Frame 27 (../../drivers/usb/usbuhci/hardware.cpp:536) [USBUHCI] Controller Port Status 0 80 (../../drivers/usb/usbuhci/hardware.cpp:537) [USBUHCI] Controller Port Status 1 80 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../lib/drivers/libusb/hub_controller.cpp:3900) CHubController::CreatePDO: DeviceName \Device\USBPDO-1 (../../lib/drivers/libusb/hub_controller.cpp:556) [USBUHCI] Name USB\ROOT_HUB&VID8086&PID3a38&REV0000 (../../drivers/usb/usbhub/fdo.c:1638) Status 0, Result 0x00000040 (../../drivers/usb/usbhub/fdo.c:1639) InformationLevel 0 (../../drivers/usb/usbhub/fdo.c:1640) ActualLength 40 (../../drivers/usb/usbhub/fdo.c:1641) PortNumber 0 (../../drivers/usb/usbhub/fdo.c:1642) DeviceDescriptor 20000112 (../../drivers/usb/usbhub/fdo.c:1643) HubAddress 0 (../../drivers/usb/usbhub/fdo.c:1644) NumberofPipes 0 (../../drivers/usb/usbhub/fdo.c:1737) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 2 (../../drivers/usb/usbuhci/hardware.cpp:1160) [UHCI] SetPortFeature PortId 0 Feature 8 (../../drivers/usb/usbuhci/hardware.cpp:1160) [UHCI] SetPortFeature PortId 1 Feature 8 (../../lib/drivers/libusb/hub_controller.cpp:313) [USBUHCI] SCE Request B77939E0 TransferBufferLength 8 Flags 3 MDL 00000000 (../../lib/drivers/libusb/hub_controller.cpp:324) [USBUHCI] Port 0: Status 100, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:324) [USBUHCI] Port 1: Status 100, Change 0 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../lib/drivers/libusb/libusb.cpp:31) USBLIB_AddDevice (../../drivers/usb/usbuhci/hardware.cpp:168) CUSBHardwareDevice::Initialize (../../drivers/bus/pci/pdo.c:1250) Assigning IRQ 15 to PCI device 0x5a on bus 0x0 (../../drivers/bus/pci/pdo.c:1267) Enabling command flags for PCI device 0x5a on bus 0x0: [Bus master] [I/O space enable] (../../drivers/usb/usbuhci/hardware.cpp:254) CUSBHardwareDevice::PnpStart (../../drivers/usb/usbuhci/hardware.cpp:298) UHCI Base 0000AC00 Length ffff0020 (../../drivers/usb/usbuhci/hardware.cpp:606) [USBUHCI] InitializeController (../../drivers/usb/usbuhci/hardware.cpp:634) [USBUHCI] LEGSUP f00 (../../drivers/usb/usbuhci/hardware.cpp:639) [USBUHCI] Acquired ownership (../../drivers/usb/usbuhci/hardware.cpp:642) [USBUHCI] SBRN 10 (../../drivers/usb/usbuhci/hardware.cpp:572) Waiting 10 milliseconds for global reset (../../drivers/usb/usbuhci/hardware.cpp:733) Index 0 QueueHead F7892000 LinkPhysical 1b7022 ElementPhysical 1 PhysicalAddress 1b7000 Request 0 NextElementDescriptor 0 (../../drivers/usb/usbuhci/hardware.cpp:741) Index 1 QueueHead F7892020 LinkPhysical 1b7042 ElementPhysical 1 PhysicalAddress 1b7020 Request 0 NextElementDescriptor 0 (../../drivers/usb/usbuhci/hardware.cpp:750) Index 2 QueueHead F7892040 LinkPhysical 1b7062 ElementPhysical 1 PhysicalAddress 1b7040 Request 0 NextElementDescriptor 0 (../../drivers/usb/usbuhci/hardware.cpp:758) Index 3 QueueHead F7892060 LinkPhysical 1b7082 ElementPhysical 1 PhysicalAddress 1b7060 Request 0 NextElementDescriptor 0 (../../drivers/usb/usbuhci/hardware.cpp:766) Index 4 QueueHead F7892080 LinkPhysical 1 ElementPhysical 1 PhysicalAddress 1b7080 Request 0 NextElementDescriptor 0 (../../drivers/usb/usbuhci/hardware.cpp:833) [USBUHCI] Controller initialized (../../drivers/usb/usbuhci/hardware.cpp:382) Starting Controller (../../drivers/usb/usbuhci/hardware.cpp:471) [USBUHCI] USBCMD: 80 USBSTS 20 (../../drivers/usb/usbuhci/hardware.cpp:489) [USBUHCI] Status 0 (../../drivers/usb/usbuhci/hardware.cpp:500) [USBUHCI] USBCMD: 81 USBSTS 0 (../../drivers/usb/usbuhci/hardware.cpp:531) [USBUHCI] Controller Started (../../drivers/usb/usbuhci/hardware.cpp:532) [USBUHCI] Controller Status 0 (../../drivers/usb/usbuhci/hardware.cpp:533) [USBUHCI] Controller Cmd Status c1 (../../drivers/usb/usbuhci/hardware.cpp:534) [USBUHCI] Controller Interrupt Status d (../../drivers/usb/usbuhci/hardware.cpp:535) [USBUHCI] Controller Frame 27 (../../drivers/usb/usbuhci/hardware.cpp:536) [USBUHCI] Controller Port Status 0 80 (../../drivers/usb/usbuhci/hardware.cpp:537) [USBUHCI] Controller Port Status 1 80 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../lib/drivers/libusb/hub_controller.cpp:3900) CHubController::CreatePDO: DeviceName \Device\USBPDO-2 (../../lib/drivers/libusb/hub_controller.cpp:556) [USBUHCI] Name USB\ROOT_HUB&VID8086&PID3a39&REV0000 (../../drivers/usb/usbhub/fdo.c:1638) Status 0, Result 0x00000040 (../../drivers/usb/usbhub/fdo.c:1639) InformationLevel 0 (../../drivers/usb/usbhub/fdo.c:1640) ActualLength 40 (../../drivers/usb/usbhub/fdo.c:1641) PortNumber 0 (../../drivers/usb/usbhub/fdo.c:1642) DeviceDescriptor 20000112 (../../drivers/usb/usbhub/fdo.c:1643) HubAddress 0 (../../drivers/usb/usbhub/fdo.c:1644) NumberofPipes 0 (../../drivers/usb/usbhub/fdo.c:1737) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 2 (../../drivers/usb/usbuhci/hardware.cpp:1160) [UHCI] SetPortFeature PortId 0 Feature 8 (../../drivers/usb/usbuhci/hardware.cpp:1160) [UHCI] SetPortFeature PortId 1 Feature 8 (../../lib/drivers/libusb/hub_controller.cpp:313) [USBUHCI] SCE Request B7774B90 TransferBufferLength 8 Flags 3 MDL 00000000 (../../lib/drivers/libusb/hub_controller.cpp:324) [USBUHCI] Port 0: Status 100, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:324) [USBUHCI] Port 1: Status 100, Change 0 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../lib/drivers/libusb/libusb.cpp:31) USBLIB_AddDevice (../../drivers/bus/pci/pdo.c:1250) Assigning IRQ 15 to PCI device 0xfa on bus 0x0 (../../drivers/bus/pci/pdo.c:1267) Enabling command flags for PCI device 0xfa on bus 0x0: [Bus master] [Memory space enable] (../../drivers/usb/usbehci/hardware.cpp:366) Controller has 32 Length (../../drivers/usb/usbehci/hardware.cpp:367) Controller EHCI Version 100 (../../drivers/usb/usbehci/hardware.cpp:368) Controller EHCI Caps HCSParamsLong 103206 (../../drivers/usb/usbehci/hardware.cpp:369) Controller EHCI Caps HCCParamsLong 16871 (../../drivers/usb/usbehci/hardware.cpp:370) Controller has 6 Ports (../../drivers/usb/usbehci/hardware.cpp:255) Controller Port Routing Rules 0 (../../drivers/usb/usbehci/hardware.cpp:256) Number of Ports per Companion Controller 2 (../../drivers/usb/usbehci/hardware.cpp:257) Number of Companion Controller 3 (../../drivers/usb/usbehci/hardware.cpp:266) Controller has Debug Port Support At Port 1 (../../drivers/usb/usbehci/hardware.cpp:271) Controller has Extended Capabilities Support (../../drivers/usb/usbehci/hardware.cpp:286) Controller uses 64-Bit Addressing (../../drivers/usb/usbehci/hardware.cpp:488) Starting Controller (../../drivers/usb/usbehci/hardware.cpp:562) [EHCI] Extended Caps Support detected! (../../drivers/usb/usbehci/hardware.cpp:713) Interrupt Mask 37 (../../drivers/usb/usbehci/hardware.cpp:812) UsbSts c000 (../../drivers/usb/usbehci/hardware.cpp:815) UsbCmd.PeriodicEnable 1 (../../drivers/usb/usbehci/hardware.cpp:816) UsbCmd.AsyncEnable 1 (../../drivers/usb/usbehci/hardware.cpp:817) UsbCmd.IntThreshold 8 (../../drivers/usb/usbehci/hardware.cpp:818) UsbCmd.Run 1 (../../drivers/usb/usbehci/hardware.cpp:819) UsbCmd.FrameListSize 0 (../../drivers/usb/usbehci/hardware.cpp:826) EHCI Started! (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../lib/drivers/libusb/hub_controller.cpp:3900) CHubController::CreatePDO: DeviceName \Device\USBPDO-3 (../../lib/drivers/libusb/hub_controller.cpp:556) [USBEHCI] Name USB\ROOT_HUB20&VID8086&PID3a3c&REV0000 (../../drivers/usb/usbhub/fdo.c:1638) Status 0, Result 0x00000040 (../../drivers/usb/usbhub/fdo.c:1639) InformationLevel 0 (../../drivers/usb/usbhub/fdo.c:1640) ActualLength 40 (../../drivers/usb/usbhub/fdo.c:1641) PortNumber 0 (../../drivers/usb/usbhub/fdo.c:1642) DeviceDescriptor 20000112 (../../drivers/usb/usbhub/fdo.c:1643) HubAddress 0 (../../drivers/usb/usbhub/fdo.c:1644) NumberofPipes 0 (../../drivers/usb/usbhub/fdo.c:1737) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 6 (../../lib/drivers/libusb/hub_controller.cpp:313) [USBEHCI] SCE Request B77AB5D8 TransferBufferLength 24 Flags 3 MDL 00000000 (../../lib/drivers/libusb/hub_controller.cpp:324) [USBEHCI] Port 0: Status 100, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:324) [USBEHCI] Port 1: Status 100, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:324) [USBEHCI] Port 2: Status 100, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:324) [USBEHCI] Port 3: Status 100, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:324) [USBEHCI] Port 4: Status 100, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:324) [USBEHCI] Port 5: Status 100, Change 0 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../drivers/bus/pci/pdo.c:1267) Enabling command flags for PCI device 0x1c on bus 0x0: None (../../drivers/bus/pci/fdo.c:571) Unknown IOCTL 0x9 (../../drivers/bus/pci/fdo.c:571) Unknown IOCTL 0x14 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../drivers/bus/pci/pdo.c:1267) Enabling command flags for PCI device 0x9c on bus 0x0: None (../../drivers/bus/pci/fdo.c:571) Unknown IOCTL 0x9 (../../drivers/bus/pci/fdo.c:571) Unknown IOCTL 0x14 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../ntoskrnl/mm/ARM3/sysldr.c:2961) ZwOpenFile failed for '\SystemRoot\system32\drivers\pciide.sys' with status 0xc000003a (../../ntoskrnl/mm/ARM3/sysldr.c:2961) ZwOpenFile failed for '\SystemRoot\system32\drivers\pciide.sys' with status 0xc000003a (../../drivers/bus/pci/pdo.c:1267) Enabling command flags for PCI device 0xbc on bus 0x0: None (../../drivers/bus/pci/fdo.c:571) Unknown IOCTL 0x9 (../../drivers/bus/pci/fdo.c:571) Unknown IOCTL 0x14 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../lib/drivers/libusb/libusb.cpp:31) USBLIB_AddDevice (../../drivers/usb/usbuhci/hardware.cpp:168) CUSBHardwareDevice::Initialize (../../drivers/bus/pci/pdo.c:1250) Assigning IRQ 6 to PCI device 0x1d on bus 0x0 (../../drivers/bus/pci/pdo.c:1267) Enabling command flags for PCI device 0x1d on bus 0x0: [Bus master] [I/O space enable] (../../drivers/usb/usbuhci/hardware.cpp:254) CUSBHardwareDevice::PnpStart (../../drivers/usb/usbuhci/hardware.cpp:298) UHCI Base 0000A080 Length ffff0020 (../../drivers/usb/usbuhci/hardware.cpp:606) [USBUHCI] InitializeController (../../drivers/usb/usbuhci/hardware.cpp:634) [USBUHCI] LEGSUP f00 (../../drivers/usb/usbuhci/hardware.cpp:639) [USBUHCI] Acquired ownership (../../drivers/usb/usbuhci/hardware.cpp:642) [USBUHCI] SBRN 10 (../../drivers/usb/usbuhci/hardware.cpp:572) Waiting 10 milliseconds for global reset (../../drivers/usb/usbuhci/hardware.cpp:733) Index 0 QueueHead F7889000 LinkPhysical 201022 ElementPhysical 1 PhysicalAddress 201000 Request 0 NextElementDescriptor 0 (../../drivers/usb/usbuhci/hardware.cpp:741) Index 1 QueueHead F7889020 LinkPhysical 201042 ElementPhysical 1 PhysicalAddress 201020 Request 0 NextElementDescriptor 0 (../../drivers/usb/usbuhci/hardware.cpp:750) Index 2 QueueHead F7889040 LinkPhysical 201062 ElementPhysical 1 PhysicalAddress 201040 Request 0 NextElementDescriptor 0 (../../drivers/usb/usbuhci/hardware.cpp:758) Index 3 QueueHead F7889060 LinkPhysical 201082 ElementPhysical 1 PhysicalAddress 201060 Request 0 NextElementDescriptor 0 (../../drivers/usb/usbuhci/hardware.cpp:766) Index 4 QueueHead F7889080 LinkPhysical 1 ElementPhysical 1 PhysicalAddress 201080 Request 0 NextElementDescriptor 0 (../../drivers/usb/usbuhci/hardware.cpp:833) [USBUHCI] Controller initialized (../../drivers/usb/usbuhci/hardware.cpp:382) Starting Controller (../../drivers/usb/usbuhci/hardware.cpp:471) [USBUHCI] USBCMD: 80 USBSTS 20 (../../drivers/usb/usbuhci/hardware.cpp:489) [USBUHCI] Status 0 (../../drivers/usb/usbuhci/hardware.cpp:500) [USBUHCI] USBCMD: 81 USBSTS 0 (../../drivers/usb/usbuhci/hardware.cpp:531) [USBUHCI] Controller Started (../../drivers/usb/usbuhci/hardware.cpp:532) [USBUHCI] Controller Status 0 (../../drivers/usb/usbuhci/hardware.cpp:533) [USBUHCI] Controller Cmd Status c1 (../../drivers/usb/usbuhci/hardware.cpp:534) [USBUHCI] Controller Interrupt Status d (../../drivers/usb/usbuhci/hardware.cpp:535) [USBUHCI] Controller Frame 27 (../../drivers/usb/usbuhci/hardware.cpp:536) [USBUHCI] Controller Port Status 0 80 (../../drivers/usb/usbuhci/hardware.cpp:537) [USBUHCI] Controller Port Status 1 80 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../lib/drivers/libusb/hub_controller.cpp:3900) CHubController::CreatePDO: DeviceName \Device\USBPDO-4 (../../lib/drivers/libusb/hub_controller.cpp:556) [USBUHCI] Name USB\ROOT_HUB&VID8086&PID3a34&REV0000 (../../drivers/usb/usbhub/fdo.c:1638) Status 0, Result 0x00000040 (../../drivers/usb/usbhub/fdo.c:1639) InformationLevel 0 (../../drivers/usb/usbhub/fdo.c:1640) ActualLength 40 (../../drivers/usb/usbhub/fdo.c:1641) PortNumber 0 (../../drivers/usb/usbhub/fdo.c:1642) DeviceDescriptor 20000112 (../../drivers/usb/usbhub/fdo.c:1643) HubAddress 0 (../../drivers/usb/usbhub/fdo.c:1644) NumberofPipes 0 (../../drivers/usb/usbhub/fdo.c:1737) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 2 (../../drivers/usb/usbuhci/hardware.cpp:1160) [UHCI] SetPortFeature PortId 0 Feature 8 (../../drivers/usb/usbuhci/hardware.cpp:1160) [UHCI] SetPortFeature PortId 1 Feature 8 (../../lib/drivers/libusb/hub_controller.cpp:313) [USBUHCI] SCE Request B77AB5C8 TransferBufferLength 8 Flags 3 MDL 00000000 (../../lib/drivers/libusb/hub_controller.cpp:324) [USBUHCI] Port 0: Status 100, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:324) [USBUHCI] Port 1: Status 100, Change 0 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../lib/drivers/libusb/libusb.cpp:31) USBLIB_AddDevice (../../drivers/usb/usbuhci/hardware.cpp:168) CUSBHardwareDevice::Initialize (../../drivers/bus/pci/pdo.c:1250) Assigning IRQ 5 to PCI device 0x3d on bus 0x0 (../../drivers/bus/pci/pdo.c:1267) Enabling command flags for PCI device 0x3d on bus 0x0: [Bus master] [I/O space enable] (../../drivers/usb/usbuhci/hardware.cpp:254) CUSBHardwareDevice::PnpStart (../../drivers/usb/usbuhci/hardware.cpp:298) UHCI Base 0000A400 Length ffff0020 (../../drivers/usb/usbuhci/hardware.cpp:606) [USBUHCI] InitializeController (../../drivers/usb/usbuhci/hardware.cpp:634) [USBUHCI] LEGSUP f00 (../../drivers/usb/usbuhci/hardware.cpp:639) [USBUHCI] Acquired ownership (../../drivers/usb/usbuhci/hardware.cpp:642) [USBUHCI] SBRN 10 (../../drivers/usb/usbuhci/hardware.cpp:572) Waiting 10 milliseconds for global reset (../../drivers/usb/usbuhci/hardware.cpp:733) Index 0 QueueHead F7885000 LinkPhysical 205022 ElementPhysical 1 PhysicalAddress 205000 Request 0 NextElementDescriptor 0 (../../drivers/usb/usbuhci/hardware.cpp:741) Index 1 QueueHead F7885020 LinkPhysical 205042 ElementPhysical 1 PhysicalAddress 205020 Request 0 NextElementDescriptor 0 (../../drivers/usb/usbuhci/hardware.cpp:750) Index 2 QueueHead F7885040 LinkPhysical 205062 ElementPhysical 1 PhysicalAddress 205040 Request 0 NextElementDescriptor 0 (../../drivers/usb/usbuhci/hardware.cpp:758) Index 3 QueueHead F7885060 LinkPhysical 205082 ElementPhysical 1 PhysicalAddress 205060 Request 0 NextElementDescriptor 0 (../../drivers/usb/usbuhci/hardware.cpp:766) Index 4 QueueHead F7885080 LinkPhysical 1 ElementPhysical 1 PhysicalAddress 205080 Request 0 NextElementDescriptor 0 (../../drivers/usb/usbuhci/hardware.cpp:833) [USBUHCI] Controller initialized (../../drivers/usb/usbuhci/hardware.cpp:382) Starting Controller (../../drivers/usb/usbuhci/hardware.cpp:471) [USBUHCI] USBCMD: 80 USBSTS 20 (../../drivers/usb/usbuhci/hardware.cpp:489) [USBUHCI] Status 0 (../../drivers/usb/usbuhci/hardware.cpp:500) [USBUHCI] USBCMD: 81 USBSTS 0 (../../drivers/usb/usbuhci/hardware.cpp:531) [USBUHCI] Controller Started (../../drivers/usb/usbuhci/hardware.cpp:532) [USBUHCI] Controller Status 0 (../../drivers/usb/usbuhci/hardware.cpp:533) [USBUHCI] Controller Cmd Status c1 (../../drivers/usb/usbuhci/hardware.cpp:534) [USBUHCI] Controller Interrupt Status d (../../drivers/usb/usbuhci/hardware.cpp:535) [USBUHCI] Controller Frame 27 (../../drivers/usb/usbuhci/hardware.cpp:536) [USBUHCI] Controller Port Status 0 80 (../../drivers/usb/usbuhci/hardware.cpp:537) [USBUHCI] Controller Port Status 1 93 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../lib/drivers/libusb/hub_controller.cpp:3900) CHubController::CreatePDO: DeviceName \Device\USBPDO-5 (../../lib/drivers/libusb/hub_controller.cpp:556) [USBUHCI] Name USB\ROOT_HUB&VID8086&PID3a35&REV0000 (../../drivers/usb/usbhub/fdo.c:1638) Status 0, Result 0x00000040 (../../drivers/usb/usbhub/fdo.c:1639) InformationLevel 0 (../../drivers/usb/usbhub/fdo.c:1640) ActualLength 40 (../../drivers/usb/usbhub/fdo.c:1641) PortNumber 0 (../../drivers/usb/usbhub/fdo.c:1642) DeviceDescriptor 20000112 (../../drivers/usb/usbhub/fdo.c:1643) HubAddress 0 (../../drivers/usb/usbhub/fdo.c:1644) NumberofPipes 0 (../../drivers/usb/usbhub/fdo.c:1737) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 2 (../../drivers/usb/usbuhci/hardware.cpp:1160) [UHCI] SetPortFeature PortId 0 Feature 8 (../../drivers/usb/usbuhci/hardware.cpp:1160) [UHCI] SetPortFeature PortId 1 Feature 8 (../../lib/drivers/libusb/hub_controller.cpp:313) [USBUHCI] SCE Request B77AB570 TransferBufferLength 8 Flags 3 MDL 00000000 (../../lib/drivers/libusb/hub_controller.cpp:324) [USBUHCI] Port 0: Status 100, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:324) [USBUHCI] Port 1: Status 101, Change 0 (../../drivers/usb/usbuhci/hardware.cpp:1160) [UHCI] SetPortFeature PortId 1 Feature 4 (../../drivers/usb/usbuhci/hardware.cpp:904) [UHCI] ResetPort Id 1 (../../drivers/usb/usbuhci/hardware.cpp:937) Waiting 20 milliseconds for port reset (../../drivers/usb/usbehci/hardware.cpp:1278) EHCI Status = 0xb (../../drivers/usb/usbehci/hardware.cpp:1324) CStatus b (../../drivers/usb/usbuhci/hardware.cpp:1014) [USBUhci] Port Index 1 Status after reset 85 (../../lib/drivers/libusb/hub_controller.cpp:313) [USBUHCI] SCE Request B77AB570 TransferBufferLength 8 Flags 3 MDL 00000000 (../../lib/drivers/libusb/hub_controller.cpp:324) [USBUHCI] Port 0: Status 100, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:324) [USBUHCI] Port 1: Status 103, Change 10 (../../lib/drivers/libusb/hub_controller.cpp:332) [USBUHCI] Change state on port 1 (../../drivers/usb/usbhub/fdo.c:234) Port 1 Status 100 (../../drivers/usb/usbhub/fdo.c:235) Port 1 Change 0 (../../drivers/usb/usbhub/fdo.c:234) Port 2 Status 103 (../../drivers/usb/usbhub/fdo.c:235) Port 2 Change 10 (../../drivers/usb/usbhub/fdo.c:325) Port 2 Status 103 (../../drivers/usb/usbhub/fdo.c:326) Port 2 Change 0 (../../lib/drivers/libusb/hub_controller.cpp:2710) USBHI_CreateUsbDevice (../../lib/drivers/libusb/usb_device.cpp:314) [USBUHCI] SetDeviceAddress> Address 1 (../../lib/drivers/libusb/usb_device.cpp:847) Dumping Device Descriptor b77691b0 (../../lib/drivers/libusb/usb_device.cpp:848) bLength 12 (../../lib/drivers/libusb/usb_device.cpp:849) bDescriptorType 1 (../../lib/drivers/libusb/usb_device.cpp:850) bcdUSB 200 (../../lib/drivers/libusb/usb_device.cpp:851) bDeviceClass ef (../../lib/drivers/libusb/usb_device.cpp:852) bDeviceSubClass 2 (../../lib/drivers/libusb/usb_device.cpp:853) bDeviceProtocol 1 (../../lib/drivers/libusb/usb_device.cpp:854) bMaxPacketSize0 40 (../../lib/drivers/libusb/usb_device.cpp:855) idVendor 458 (../../lib/drivers/libusb/usb_device.cpp:856) idProduct 705f (../../lib/drivers/libusb/usb_device.cpp:857) bcdDevice 1 (../../lib/drivers/libusb/usb_device.cpp:858) iManufacturer 10 (../../lib/drivers/libusb/usb_device.cpp:859) iProduct 60 (../../lib/drivers/libusb/usb_device.cpp:860) iSerialNumber 0 (../../lib/drivers/libusb/usb_device.cpp:861) bNumConfigurations 1 (../../lib/drivers/libusb/usb_device.cpp:868) Dumping ConfigurationDescriptor b7753000 (../../lib/drivers/libusb/usb_device.cpp:869) bLength 9 (../../lib/drivers/libusb/usb_device.cpp:870) bDescriptorType 2 (../../lib/drivers/libusb/usb_device.cpp:871) wTotalLength 26a (../../lib/drivers/libusb/usb_device.cpp:872) bNumInterfaces 4 (../../lib/drivers/libusb/usb_device.cpp:873) bConfigurationValue 1 (../../lib/drivers/libusb/usb_device.cpp:874) iConfiguration 30 (../../lib/drivers/libusb/usb_device.cpp:875) bmAttributes 80 (../../lib/drivers/libusb/usb_device.cpp:876) MaxPower fa (../../drivers/usb/usbhub/misc.c:16) Dumping Device Descriptor b7756b28 (../../drivers/usb/usbhub/misc.c:17) bLength 12 (../../drivers/usb/usbhub/misc.c:18) bDescriptorType 1 (../../drivers/usb/usbhub/misc.c:19) bcdUSB 200 (../../drivers/usb/usbhub/misc.c:20) bDeviceClass ef (../../drivers/usb/usbhub/misc.c:21) bDeviceSubClass 2 (../../drivers/usb/usbhub/misc.c:22) bDeviceProtocol 1 (../../drivers/usb/usbhub/misc.c:23) bMaxPacketSize0 40 (../../drivers/usb/usbhub/misc.c:24) idVendor 458 (../../drivers/usb/usbhub/misc.c:25) idProduct 705f (../../drivers/usb/usbhub/misc.c:26) bcdDevice 1 (../../drivers/usb/usbhub/misc.c:27) iManufacturer 10 (../../drivers/usb/usbhub/misc.c:28) iProduct 60 (../../drivers/usb/usbhub/misc.c:29) iSerialNumber 0 (../../drivers/usb/usbhub/misc.c:30) bNumConfigurations 1 (../../drivers/usb/usbhub/misc.c:37) Dumping ConfigurationDescriptor f78c1cb3 (../../drivers/usb/usbhub/misc.c:38) bLength 9 (../../drivers/usb/usbhub/misc.c:39) bDescriptorType 2 (../../drivers/usb/usbhub/misc.c:40) wTotalLength 26a (../../drivers/usb/usbhub/misc.c:41) bNumInterfaces 4 (../../drivers/usb/usbhub/misc.c:42) bConfigurationValue 1 (../../drivers/usb/usbhub/misc.c:43) iConfiguration 30 (../../drivers/usb/usbhub/misc.c:44) bmAttributes 80 (../../drivers/usb/usbhub/misc.c:45) MaxPower fa (../../drivers/usb/usbhub/fdo.c:1285) Warning: Device has more that one interface. Only one interface (the first) is currently supported (../../drivers/usb/usbhub/fdo.c:801) IsCompositeDevice: TRUE (../../drivers/usb/usbhub/fdo.c:685) StringDesc->bLength 22 (../../lib/drivers/libusb/hub_controller.cpp:313) [USBUHCI] SCE Request B77AB570 TransferBufferLength 8 Flags 3 MDL 00000000 (../../lib/drivers/libusb/hub_controller.cpp:324) [USBUHCI] Port 0: Status 100, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:324) [USBUHCI] Port 1: Status 103, Change 0 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../drivers/usb/usbhub/pdo.c:541) iSlim 321R (../../drivers/usb/usbhub/pdo.c:541) iSlim 321R (../../ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbccgp' for critical device 'USB#COMPOSITE' (../../drivers/usb/usbhub/pdo.c:747) PDO IRP_MJ_PNP / unknown minor function 0xd WARNING: USBHUB_PdoStartDevice at ../../drivers/usb/usbhub/pdo.c:414 is UNIMPLEMENTED! (../../drivers/usb/usbhub/pdo.c:244) URB_FUNCTION_GET_DESCRIPTOR_FROM_DEVICE (../../drivers/usb/usbhub/pdo.c:244) URB_FUNCTION_GET_DESCRIPTOR_FROM_DEVICE (../../drivers/usb/usbhub/pdo.c:244) URB_FUNCTION_GET_DESCRIPTOR_FROM_DEVICE Dumping ConfigurationDescriptor b7879220 bLength 9 bDescriptorType 2 wTotalLength 26a bNumInterfaces 4 bConfigurationValue 1 iConfiguration 30 bmAttributes 80 MaxPower fa Bogus ConfigurationDescriptor Found InterfaceCount 4 Descriptor Type 2 Length 9 Offset 0 Descriptor Type b Length 8 Offset 9 Descriptor Type 4 Length 9 Offset 17 Descriptor Type 24 Length 13 Offset 26 Descriptor Type 24 Length 9 Offset 39 Descriptor Type 24 Length 26 Offset 48 Descriptor Type 24 Length 18 Offset 74 Descriptor Type 24 Length 11 Offset 92 Descriptor Type 5 Length 7 Offset 103 Descriptor Type 25 Length 5 Offset 110 Descriptor Type 4 Length 9 Offset 115 Descriptor Type 24 Length 14 Offset 124 Descriptor Type 24 Length 11 Offset 138 Descriptor Type 24 Length 38 Offset 149 Descriptor Type 24 Length 38 Offset 187 Descriptor Type 24 Length 38 Offset 225 Descriptor Type 24 Length 38 Offset 263 Descriptor Type 24 Length 38 Offset 301 Descriptor Type 24 Length 27 Offset 339 Descriptor Type 24 Length 6 Offset 366 Descriptor Type 4 Length 9 Offset 372 Descriptor Type 5 Length 7 Offset 381 Descriptor Type 4 Length 9 Offset 388 Descriptor Type 5 Length 7 Offset 397 Descriptor Type 4 Length 9 Offset 404 Descriptor Type 5 Length 7 Offset 413 Descriptor Type 4 Length 9 Offset 420 Descriptor Type 5 Length 7 Offset 429 Descriptor Type 4 Length 9 Offset 436 Descriptor Type 5 Length 7 Offset 445 Descriptor Type 4 Length 9 Offset 452 Descriptor Type 5 Length 7 Offset 461 Descriptor Type 0 Length 0 Offset 468 Bogus Descriptor!!! Assertion '0' failed at ../../drivers/usb/usbccgp/descriptor.c line 366  Entered debugger on embedded INT3 at 0x0008:0x80927776. kdb:> bt Eip: Frames: --- Press q to abort, any other key to continue --- --- Press q to abort, any other key to continue --- --- Press q to abort, any other key to continue --- <0000000e> Couldn't access memory at 0x00097A00! kdb:> cont Dumping ConfigurationDescriptor b7879220 bLength 9 bDescriptorType 2 wTotalLength 26a bNumInterfaces 4 bConfigurationValue 1 iConfiguration 30 bmAttributes 80 MaxPower fa Bogus ConfigurationDescriptor Found InterfaceCount 4 Descriptor Type 2 Length 9 Offset 0 Descriptor Type b Length 8 Offset 9 Descriptor Type 4 Length 9 Offset 17 Descriptor Type 24 Length 13 Offset 26 Descriptor Type 24 Length 9 Offset 39 Descriptor Type 24 Length 26 Offset 48 Descriptor Type 24 Length 18 Offset 74 Descriptor Type 24 Length 11 Offset 92 Descriptor Type 5 Length 7 Offset 103 Descriptor Type 25 Length 5 Offset 110 Descriptor Type 4 Length 9 Offset 115 Descriptor Type 24 Length 14 Offset 124 Descriptor Type 24 Length 11 Offset 138 Descriptor Type 24 Length 38 Offset 149 Descriptor Type 24 Length 38 Offset 187 Descriptor Type 24 Length 38 Offset 225 Descriptor Type 24 Length 38 Offset 263 Descriptor Type 24 Length 38 Offset 301 Descriptor Type 24 Length 27 Offset 339 Descriptor Type 24 Length 6 Offset 366 Descriptor Type 4 Length 9 Offset 372 Descriptor Type 5 Length 7 Offset 381 Descriptor Type 4 Length 9 Offset 388 Descriptor Type 5 Length 7 Offset 397 Descriptor Type 4 Length 9 Offset 404 Descriptor Type 5 Length 7 Offset 413 Descriptor Type 4 Length 9 Offset 420 Descriptor Type 5 Length 7 Offset 429 Descriptor Type 4 Length 9 Offset 436 Descriptor Type 5 Length 7 Offset 445 Descriptor Type 4 Length 9 Offset 452 Descriptor Type 5 Length 7 Offset 461 Descriptor Type 0 Length 0 Offset 468 Bogus Descriptor!!! Assertion '0' failed at ../../drivers/usb/usbccgp/descriptor.c line 366 Entered debugger on embedded INT3 at 0x0008:0x80927776. kdb:> bt Eip: Frames: --- Press q to abort, any other key to continue --- --- Press q to abort, any other key to continue --- --- Press q to abort, any other key to continue --- <0000000e> Couldn't access memory at 0x00097A00! kdb:> cont (../../drivers/usb/usbhub/pdo.c:253) URB_FUNCTION_SELECT_CONFIGURATION (../../lib/drivers/libusb/usb_device.cpp:1073) [USBUHCI] SelectConfiguration New Configuration 0 Old Configuration 0 Result 0 Assertion 'InterfaceInfo->Length != 0' failed at ../../lib/drivers/libusb/usb_device.cpp line 1108 Entered debugger on embedded INT3 at 0x0008:0x80927776. kdb:> cont Assertion 'InterfaceInfo->NumberOfPipes == InterfaceDescriptor->bNumEndpoints' failed at ../../lib/drivers/libusb/usb_device.cpp line 1121 Entered debugger on embedded INT3 at 0x0008:0x80927776. kdb:> cont Assertion 'InterfaceInfo->Length != 0' failed at ../../lib/drivers/libusb/usb_device.cpp line 1108 Entered debugger on embedded INT3 at 0x0008:0x80927776. kdb:> cont Assertion 'InterfaceInfo->NumberOfPipes == InterfaceDescriptor->bNumEndpoints' failed at ../../lib/drivers/libusb/usb_device.cpp line 1121 Entered debugger on embedded INT3 at 0x0008:0x80927776. kdb:> cont (../../ntoskrnl/mm/ARM3/expool.c:274) Entry BlockSize 11, tag None. NextEntry PreviousSize 270, tag ˜au· *** Fatal System Error: 0x00000019 (0x00000005,0xB77569F8,0x00000116,0xB77569A0) Entered debugger on embedded INT3 at 0x0008:0x8092777c. kdb:> cont (../../ntoskrnl/ke/bug.c:599) Potentially unloaded driver! (../../ntoskrnl/ke/b