(ntoskrnl/kd/kdio.c:376) ----------------------------------------------------- (ntoskrnl/kd/kdio.c:377) ReactOS 0.4-SVN (Build 20140227-r62348) (ntoskrnl/kd/kdio.c:379) 1 System Processor [502 MB Memory] (ntoskrnl/kd/kdio.c:380) Command Line: DEBUG DEBUGPORT=COM1 BAUDRATE=115200 SOS MININT (ntoskrnl/kd/kdio.c:384) ARC Paths: multi(0)disk(0)cdrom(2) \ multi(0)disk(0)cdrom(2) \reactos\ (ntoskrnl/ke/i386/cpu.c:494) Supported CPU features : KF_V86_VIS KF_RDTSC KF_CR4 KF_CMOV KF_GLOBAL_PAGE KF_LARGE_PAGE KF_MTRR KF_CMPXCHG8B KF_MMX KF_WORKING_PTE KF_PAT KF_FXSR KF_FAST_SYSCALL KF_XMMI KF_XMMI64 KF_DTS KF_NX_BIT (ntoskrnl/ke/i386/cpu.c:801) Prefetch Cache: 32 bytes L2 Cache: 2097152 bytes L2 Cache Line: 64 bytes L2 Cache Associativity: 8 (ntoskrnl/mm/ARM3/mminit.c:1443) HAL I/O Mapping at FFFE0000 is unsafe (ntoskrnl/mm/mminit.c:260) 0x80000000 - 0x83000000 Boot Loaded Image (ntoskrnl/mm/mminit.c:264) 0xB0000000 - 0xB0370000 PFN Database (ntoskrnl/mm/mminit.c:268) 0xB0370000 - 0xB12F8000 ARM3 Non Paged Pool (ntoskrnl/mm/mminit.c:272) 0xB9400000 - 0xBB400000 System View Space (ntoskrnl/mm/mminit.c:276) 0xBB400000 - 0xC0000000 Session Space (ntoskrnl/mm/mminit.c:279) 0xC0000000 - 0xC03FFFFF Page Tables (ntoskrnl/mm/mminit.c:282) 0xC0300000 - 0xC0300FFF Page Directories (ntoskrnl/mm/mminit.c:285) 0xC0400000 - 0xC07FFFFF Hyperspace (ntoskrnl/mm/mminit.c:289) 0xE1000000 - 0xECC00000 ARM3 Paged Pool (ntoskrnl/mm/mminit.c:292) 0xECC00000 - 0xF7BE0000 System PTE Space (ntoskrnl/mm/mminit.c:295) 0xF7BE0000 - 0xFFBE0000 Non Paged Pool Expansion PTE Space (hal/halx86/legacy/bussupp.c:594) Your machine has a PCI-to-PCI or CardBUS Bridge. PCI devices may fail! (hal/halx86/legacy/bussupp.c:623) Found parent bus (indicating PCI Bridge). PCI devices may fail! ====== PCI BUS HARDWARE DETECTION ======= 00:00.0 Host bridge [0600]: Unknown device [8086:2770] (rev 02) Subsystem: Unknown [1028:01ad] Flags: bus master, fast devsel, latency 0 00:01.0 PCI bridge [0604]: Unknown device [8086:2771] (rev 02) Subsystem: Unknown [0000:0000] Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at 00010100 (32-bit, non-prefetchable) [size=256] Memory at 000000f0 (32-bit, non-prefetchable) Memory at fe90fe90 (32-bit, non-prefetchable) [size=512] I/O ports at 1fff0 [size=16] 00:02.0 VGA compatible controller [0300]: Unknown device [8086:2772] (rev 02) Subsystem: Unknown [1028:01ad] Flags: fast devsel, latency 0, IRQ 11 Memory at feb00000 (32-bit, non-prefetchable) [size=1M] I/O ports at e898 [size=8] Memory at e0000000 (32-bit, prefetchable) [size=512M] Memory at feac0000 (32-bit, non-prefetchable) [size=256K] Device is using IRQ 11! ISA Cards using that IRQ may fail! 00:02.1 Display controller [0380]: Unknown device [8086:2776] (rev 02) Subsystem: Unknown [1028:01ad] Flags: bus master, fast devsel, latency 0 Memory at feb80000 (32-bit, non-prefetchable) [size=512K] 00:1c.0 PCI bridge [0604]: Unknown device [8086:27d0] (rev 01) Subsystem: Unknown [0000:0000] Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at 00020200 (32-bit, non-prefetchable) [size=512] Memory at 000000f0 (32-bit, non-prefetchable) Memory at fe80fe80 (32-bit, non-prefetchable) [size=512] I/O ports at 1fff0 [size=16] 00:1c.1 PCI bridge [0604]: Unknown device [8086:27d2] (rev 01) Subsystem: Unknown [0000:0000] Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at 00030300 (32-bit, non-prefetchable) [size=256] Memory at 200000f0 (32-bit, non-prefetchable) [size=512M] Memory at fe70fe70 (32-bit, non-prefetchable) [size=512] I/O ports at 1fff0 [size=16] 00:1d.0 USB controller [0c03]: Unknown device [8086:27c8] (rev 01) Subsystem: Unknown [1028:01ad] Flags: bus master, medium devsel, latency 0, IRQ 09 I/O ports at ff80 [size=128] Device is using IRQ 9! ISA Cards using that IRQ may fail! Device is an Intel UHCI (USB) Controller. Turn off Legacy USB in your BIOS! 00:1d.1 USB controller [0c03]: Unknown device [8086:27c9] (rev 01) Subsystem: Unknown [1028:01ad] Flags: bus master, medium devsel, latency 0, IRQ 05 I/O ports at ff60 [size=32] Device is using IRQ 5! ISA Cards using that IRQ may fail! Device is an Intel UHCI (USB) Controller. Turn off Legacy USB in your BIOS! 00:1d.2 USB controller [0c03]: Unknown device [8086:27ca] (rev 01) Subsystem: Unknown [1028:01ad] Flags: bus master, medium devsel, latency 0, IRQ 03 I/O ports at ff40 [size=64] Device is using IRQ 3! ISA Cards using that IRQ may fail! Device is an Intel UHCI (USB) Controller. Turn off Legacy USB in your BIOS! 00:1d.3 USB controller [0c03]: Unknown device [8086:27cb] (rev 01) Subsystem: Unknown [1028:01ad] Flags: bus master, medium devsel, latency 0, IRQ 10 I/O ports at ff20 [size=32] Device is using IRQ 10! ISA Cards using that IRQ may fail! Device is an Intel UHCI (USB) Controller. Turn off Legacy USB in your BIOS! 00:1d.7 USB controller [0c03]: Unknown device [8086:27cc] (rev 01) Subsystem: Unknown [1028:01ad] Flags: bus master, medium devsel, latency 0, IRQ 09 Memory at ffa80800 (32-bit, non-prefetchable) [size=2K] Device is using IRQ 9! ISA Cards using that IRQ may fail! Device is an Intel UHCI (USB) Controller. Turn off Legacy USB in your BIOS! 00:1e.0 PCI bridge [0604]: Unknown device [8086:244e] (rev e1) Subsystem: Unknown [0000:0000] Flags: bus master, fast devsel, latency 0 Memory at 20040400 (32-bit, non-prefetchable) [size=1K] Memory at 2280d0d0 (32-bit, non-prefetchable) [size=4K] Memory at fe60fe60 (32-bit, non-prefetchable) [size=512] I/O ports at 1fff0 [size=16] 00:1e.2 Multimedia audio controller [0401]: Unknown device [8086:27de] (rev 01) Subsystem: Unknown [1028:01ad] Flags: bus master, medium devsel, latency 0, IRQ 10 I/O ports at ec00 [size=1K] I/O ports at e8c0 [size=64] Memory at feabfa00 (32-bit, non-prefetchable) [size=512] Memory at feabf900 (32-bit, non-prefetchable) [size=256] Device is using IRQ 10! ISA Cards using that IRQ may fail! 00:1f.0 ISA bridge [0601]: Unknown device [8086:27b8] (rev 01) Subsystem: Unknown [0000:0000] Flags: bus master, medium devsel, latency 0 00:1f.1 IDE interface [0101]: Unknown device [8086:27df] (rev 01) Subsystem: Unknown [1028:01ad] Flags: bus master, medium devsel, latency 0, IRQ 11 I/O ports at 01f0 [size=16] I/O ports at 03f4 [size=4] I/O ports at 0170 [size=16] I/O ports at 0374 [size=4] I/O ports at ffa0 [size=32] 00:1f.2 IDE interface [0101]: Unknown device [8086:27c0] (rev 01) Subsystem: Unknown [1028:01ad] Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 05 I/O ports at fe00 [size=512] I/O ports at fe10 [size=16] I/O ports at fe20 [size=32] I/O ports at fe30 [size=16] I/O ports at fea0 [size=32] 00:1f.3 SMBus [0c05]: Unknown device [8086:27da] (rev 01) Subsystem: Unknown [1028:01ad] Flags: medium devsel, latency 0, IRQ 10 I/O ports at e8a0 [size=32] Device is using IRQ 10! ISA Cards using that IRQ may fail! 02:00.0 Ethernet controller [0200]: Unknown device [14e4:1677] (rev 01) Subsystem: Unknown [1028:01ad] Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at fe8f0000 (64-bit, non-prefetchable) [size=64K] Device is using IRQ 11! ISA Cards using that IRQ may fail! 04:02.0 Communication controller [0780]: Unknown device [14f1:2f20] (rev 00) Subsystem: Unknown [14f1:200f] Flags: bus master, medium devsel, latency 64, IRQ 03 Memory at fe6f0000 (32-bit, non-prefetchable) [size=64K] I/O ports at dcf8 [size=8] Device is using IRQ 3! ISA Cards using that IRQ may fail! ====== PCI BUS DETECTION COMPLETE ======= PC Compatible Eisa/Isa HAL Detected (ntoskrnl/io/pnpmgr/pnpmgr.c:3186) Firmware mapper is enabled (ntoskrnl/io/pnpmgr/pnpreport.c:353) Reported device: DETECTEDInternal\PCI_HAL (Root\PCI_HAL\0) SAC DriverEntry: Entering. (ntoskrnl/io/iomgr/driver.c:1602) '\Driver\SACDRV' initialization failed, status (0xc0000037) (ntoskrnl/io/iomgr/driver.c:61) Deleting driver object '\Driver\SACDRV' (drivers/bus/acpi/main.c:460) GetProcessorInformation() (hal/halx86/legacy/bussupp.c:1159) Slot assignment for 5 on bus 0 (hal/halx86/legacy/bus/pcibus.c:715) WARNING: PCI Slot Resource Assignment is FOOBAR (ntoskrnl/io/iomgr/iorsrce.c:874) IoReportResourceUsage is halfplemented! (ntoskrnl/io/iomgr/iorsrce.c:874) IoReportResourceUsage is halfplemented! (hal/halx86/legacy/bussupp.c:1159) Slot assignment for 5 on bus 0 (hal/halx86/legacy/bus/pcibus.c:715) WARNING: PCI Slot Resource Assignment is FOOBAR (ntoskrnl/io/iomgr/driver.c:1602) '\Driver\BUSLOGIC' initialization failed, status (0xc00000c0) (ntoskrnl/io/iomgr/driver.c:61) Deleting driver object '\Driver\BUSLOGIC' (ntoskrnl/io/iomgr/driver.c:61) Deleting driver object '\Driver\CDFS' (ntoskrnl/mm/ARM3/sysldr.c:937) Leaking driver: cdfs.sys (ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'pci' for critical device '*PNP0A03' (ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:699) ZwOpenKey() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:699) ZwOpenKey() failed with Status C0000034 (hal/halx86/legacy/halpnpdd.c:716) Start device received (drivers/bus/pci/fdo.c:586) Unknown IOCTL 0x9 (drivers/bus/pci/fdo.c:586) Unknown IOCTL 0x14 (ntoskrnl/io/pnpmgr/pnpmgr.c:4028) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'pci' for critical device 'PCI#CC_0604' (ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'VBE' for critical device 'PCI#CC_0300' (ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'pci' for critical device 'PCI#CC_0604' (ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'pci' for critical device 'PCI#CC_0604' (ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbuhci' for critical device 'PCI#CC_0C0300' (ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbuhci' for critical device 'PCI#CC_0C0300' (ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbuhci' for critical device 'PCI#CC_0C0300' (ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbuhci' for critical device 'PCI#CC_0C0300' (ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbehci' for critical device 'PCI#CC_0C0320' (ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'pci' for critical device 'PCI#CC_0604' (ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:699) ZwOpenKey() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:699) ZwOpenKey() failed with Status C0000034 (drivers/bus/pci/pdo.c:1289) Enabling command flags for PCI device 0x1 on bus 0x0: None (drivers/bus/pci/fdo.c:586) Unknown IOCTL 0x9 (drivers/bus/pci/fdo.c:586) Unknown IOCTL 0x14 (ntoskrnl/io/pnpmgr/pnpmgr.c:4028) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (ntoskrnl/mm/ARM3/sysldr.c:3007) ZwOpenFile failed for '\SystemRoot\system32\drivers\vbemp.sys' with status 0xc000003a (ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:699) ZwOpenKey() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:699) ZwOpenKey() failed with Status C0000034 (drivers/bus/pci/pdo.c:1289) Enabling command flags for PCI device 0x1c on bus 0x0: None (drivers/bus/pci/fdo.c:586) Unknown IOCTL 0x9 (drivers/bus/pci/fdo.c:586) Unknown IOCTL 0x14 (ntoskrnl/io/pnpmgr/pnpmgr.c:4028) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:699) ZwOpenKey() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:699) ZwOpenKey() failed with Status C0000034 (drivers/bus/pci/pdo.c:1289) Enabling command flags for PCI device 0x3c on bus 0x0: None (drivers/bus/pci/fdo.c:586) Unknown IOCTL 0x9 (drivers/bus/pci/fdo.c:586) Unknown IOCTL 0x14 (ntoskrnl/io/pnpmgr/pnpmgr.c:4028) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:699) ZwOpenKey() failed with Status C0000034 (lib/drivers/libusb/libusb.cpp:33) USBLIB_AddDevice (drivers/usb/usbuhci/hardware.cpp:169) CUSBHardwareDevice::Initialize (ntoskrnl/io/iomgr/driver.c:699) ZwOpenKey() failed with Status C0000034 (hal/halx86/legacy/bus/pcibus.c:686) HAL: No PCI Resource Adjustment done! Hardware may malfunction (drivers/bus/pci/pdo.c:1272) Assigning IRQ 9 to PCI device 0x1d on bus 0x0 (drivers/bus/pci/pdo.c:1289) Enabling command flags for PCI device 0x1d on bus 0x0: [Bus master] [I/O space enable] (drivers/usb/usbuhci/hardware.cpp:255) CUSBHardwareDevice::PnpStart (drivers/usb/usbuhci/hardware.cpp:299) UHCI Base 0000FF80 Length ffff0020 (drivers/usb/usbuhci/hardware.cpp:607) [USBUHCI] InitializeController (drivers/usb/usbuhci/hardware.cpp:635) [USBUHCI] LEGSUP 3b (drivers/usb/usbuhci/hardware.cpp:640) [USBUHCI] Acquired ownership (drivers/usb/usbuhci/hardware.cpp:643) [USBUHCI] SBRN 10 (drivers/usb/usbuhci/hardware.cpp:573) Waiting 10 milliseconds for global reset (drivers/usb/usbuhci/hardware.cpp:734) Index 0 QueueHead F784F000 LinkPhysical 109022 ElementPhysical 1 PhysicalAddress 109000 Request 00000000 NextElementDescriptor 00000000 (drivers/usb/usbuhci/hardware.cpp:742) Index 1 QueueHead F784F020 LinkPhysical 109042 ElementPhysical 1 PhysicalAddress 109020 Request 00000000 NextElementDescriptor 00000000 (drivers/usb/usbuhci/hardware.cpp:751) Index 2 QueueHead F784F040 LinkPhysical 109062 ElementPhysical 1 PhysicalAddress 109040 Request 00000000 NextElementDescriptor 00000000 (drivers/usb/usbuhci/hardware.cpp:759) Index 3 QueueHead F784F060 LinkPhysical 109082 ElementPhysical 1 PhysicalAddress 109060 Request 00000000 NextElementDescriptor 00000000 (drivers/usb/usbuhci/hardware.cpp:767) Index 4 QueueHead F784F080 LinkPhysical 1 ElementPhysical 1 PhysicalAddress 109080 Request 00000000 NextElementDescriptor 00000000 (drivers/usb/usbuhci/hardware.cpp:834) [USBUHCI] Controller initialized (drivers/usb/usbuhci/hardware.cpp:383) Starting Controller (drivers/usb/usbuhci/hardware.cpp:472) [USBUHCI] USBCMD: 80 USBSTS 20 (drivers/usb/usbuhci/hardware.cpp:490) [USBUHCI] Status 0 (drivers/usb/usbuhci/hardware.cpp:501) [USBUHCI] USBCMD: 81 USBSTS 0 (drivers/usb/usbuhci/hardware.cpp:532) [USBUHCI] Controller Started (drivers/usb/usbuhci/hardware.cpp:533) [USBUHCI] Controller Status 0 (drivers/usb/usbuhci/hardware.cpp:534) [USBUHCI] Controller Cmd Status c1 (drivers/usb/usbuhci/hardware.cpp:535) [USBUHCI] Controller Interrupt Status d (drivers/usb/usbuhci/hardware.cpp:536) [USBUHCI] Controller Frame 24 (drivers/usb/usbuhci/hardware.cpp:537) [USBUHCI] Controller Port Status 0 1a3 (drivers/usb/usbuhci/hardware.cpp:538) [USBUHCI] Controller Port Status 1 1a3 (ntoskrnl/io/pnpmgr/pnpmgr.c:4028) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (lib/drivers/libusb/hub_controller.cpp:3922) CHubController::CreatePDO: DeviceName \Device\USBPDO-0 (ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbhub' for critical device 'USB#ROOT_HUB' (ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:699) ZwOpenKey() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:699) ZwOpenKey() failed with Status C0000034 (drivers/usb/usbhub/fdo.c:1641) Status 0, Result 0x00000040 (drivers/usb/usbhub/fdo.c:1642) InformationLevel 0 (drivers/usb/usbhub/fdo.c:1643) ActualLength 40 (drivers/usb/usbhub/fdo.c:1644) PortNumber 0 (drivers/usb/usbhub/fdo.c:1645) DeviceDescriptor 20000112 (drivers/usb/usbhub/fdo.c:1646) HubAddress 0 (drivers/usb/usbhub/fdo.c:1647) NumberofPipes 0 (drivers/usb/usbhub/fdo.c:1740) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 2 (drivers/usb/usbuhci/hardware.cpp:1161) [UHCI] SetPortFeature PortId 0 Feature 8 (drivers/usb/usbuhci/hardware.cpp:1161) [UHCI] SetPortFeature PortId 1 Feature 8 (ntoskrnl/io/pnpmgr/pnpmgr.c:4028) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:699) ZwOpenKey() failed with Status C0000034 (lib/drivers/libusb/libusb.cpp:33) USBLIB_AddDevice (drivers/usb/usbuhci/hardware.cpp:169) CUSBHardwareDevice::Initialize (ntoskrnl/io/iomgr/driver.c:699) ZwOpenKey() failed with Status C0000034 (hal/halx86/legacy/bus/pcibus.c:686) HAL: No PCI Resource Adjustment done! Hardware may malfunction (drivers/bus/pci/pdo.c:1272) Assigning IRQ 5 to PCI device 0x3d on bus 0x0 (drivers/bus/pci/pdo.c:1289) Enabling command flags for PCI device 0x3d on bus 0x0: [Bus master] [I/O space enable] (drivers/usb/usbuhci/hardware.cpp:255) CUSBHardwareDevice::PnpStart (drivers/usb/usbuhci/hardware.cpp:299) UHCI Base 0000FF60 Length ffff0020 (drivers/usb/usbuhci/hardware.cpp:607) [USBUHCI] InitializeController (drivers/usb/usbuhci/hardware.cpp:635) [USBUHCI] LEGSUP 10 (drivers/usb/usbuhci/hardware.cpp:640) [USBUHCI] Acquired ownership (drivers/usb/usbuhci/hardware.cpp:643) [USBUHCI] SBRN 10 (drivers/usb/usbuhci/hardware.cpp:573) Waiting 10 milliseconds for global reset (lib/drivers/libusb/hub_controller.cpp:314) [USBUHCI] SCE Request B12C9C38 TransferBufferLength 8 Flags 3 MDL 00000000 (drivers/usb/usbuhci/hardware.cpp:734) Index 0 QueueHead F784B000 LinkPhysical 10d022 ElementPhysical 1 PhysicalAddress 10d000 Request 00000000 NextElementDescriptor 00000000 (drivers/usb/usbuhci/hardware.cpp:742) Index 1 QueueHead F784B020 LinkPhysical 10d042 ElementPhysical 1 PhysicalAddress 10d020 Request 00000000 NextElementDescriptor 00000000 (drivers/usb/usbuhci/hardware.cpp:751) Index 2 QueueHead F784B040 LinkPhysical 10d062 ElementPhysical 1 PhysicalAddress 10d040 Request 00000000 NextElementDescriptor 00000000 (drivers/usb/usbuhci/hardware.cpp:759) Index 3 QueueHead F784B060 LinkPhysical 10d082 ElementPhysical 1 PhysicalAddress 10d060 Request 00000000 NextElementDescriptor 00000000 (drivers/usb/usbuhci/hardware.cpp:767) Index 4 QueueHead F784B080 LinkPhysical 1 ElementPhysical 1 PhysicalAddress 10d080 Request 00000000 NextElementDescriptor 00000000 (drivers/usb/usbuhci/hardware.cpp:834) [USBUHCI] Controller initialized (drivers/usb/usbuhci/hardware.cpp:383) Starting Controller (drivers/usb/usbuhci/hardware.cpp:472) [USBUHCI] USBCMD: 80 USBSTS 20 (drivers/usb/usbuhci/hardware.cpp:490) [USBUHCI] Status 0 (drivers/usb/usbuhci/hardware.cpp:501) [USBUHCI] USBCMD: 81 USBSTS 0 (drivers/usb/usbuhci/hardware.cpp:532) [USBUHCI] Controller Started (drivers/usb/usbuhci/hardware.cpp:533) [USBUHCI] Controller Status 0 (drivers/usb/usbuhci/hardware.cpp:534) [USBUHCI] Controller Cmd Status c1 (drivers/usb/usbuhci/hardware.cpp:535) [USBUHCI] Controller Interrupt Status d (drivers/usb/usbuhci/hardware.cpp:536) [USBUHCI] Controller Frame 24 (drivers/usb/usbuhci/hardware.cpp:537) [USBUHCI] Controller Port Status 0 80 (drivers/usb/usbuhci/hardware.cpp:538) [USBUHCI] Controller Port Status 1 80 (ntoskrnl/io/pnpmgr/pnpmgr.c:4028) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (lib/drivers/libusb/hub_controller.cpp:3922) CHubController::CreatePDO: DeviceName \Device\USBPDO-1 (ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbhub' for critical device 'USB#ROOT_HUB' (ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:699) ZwOpenKey() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:699) ZwOpenKey() failed with Status C0000034 (drivers/usb/usbhub/fdo.c:1641) Status 0, Result 0x00000040 (drivers/usb/usbhub/fdo.c:1642) InformationLevel 0 (drivers/usb/usbhub/fdo.c:1643) ActualLength 40 (drivers/usb/usbhub/fdo.c:1644) PortNumber 0 (drivers/usb/usbhub/fdo.c:1645) DeviceDescriptor 20000112 (drivers/usb/usbhub/fdo.c:1646) HubAddress 0 (drivers/usb/usbhub/fdo.c:1647) NumberofPipes 0 (drivers/usb/usbhub/fdo.c:1740) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 2 (drivers/usb/usbuhci/hardware.cpp:1161) [UHCI] SetPortFeature PortId 0 Feature 8 (drivers/usb/usbuhci/hardware.cpp:1161) [UHCI] SetPortFeature PortId 1 Feature 8 (ntoskrnl/io/pnpmgr/pnpmgr.c:4028) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:699) ZwOpenKey() failed with Status C0000034 (lib/drivers/libusb/libusb.cpp:33) USBLIB_AddDevice (drivers/usb/usbuhci/hardware.cpp:169) CUSBHardwareDevice::Initialize (ntoskrnl/io/iomgr/driver.c:699) ZwOpenKey() failed with Status C0000034 (hal/halx86/legacy/bus/pcibus.c:686) HAL: No PCI Resource Adjustment done! Hardware may malfunction (drivers/bus/pci/pdo.c:1272) Assigning IRQ 3 to PCI device 0x5d on bus 0x0 (drivers/bus/pci/pdo.c:1289) Enabling command flags for PCI device 0x5d on bus 0x0: [Bus master] [I/O space enable] (drivers/usb/usbuhci/hardware.cpp:255) CUSBHardwareDevice::PnpStart (drivers/usb/usbuhci/hardware.cpp:299) UHCI Base 0000FF40 Length ffff0020 (drivers/usb/usbuhci/hardware.cpp:607) [USBUHCI] InitializeController (drivers/usb/usbuhci/hardware.cpp:635) [USBUHCI] LEGSUP 10 (drivers/usb/usbuhci/hardware.cpp:640) [USBUHCI] Acquired ownership (drivers/usb/usbuhci/hardware.cpp:643) [USBUHCI] SBRN 10 (drivers/usb/usbuhci/hardware.cpp:573) Waiting 10 milliseconds for global reset (lib/drivers/libusb/hub_controller.cpp:325) [USBUHCI] Port 0: Status 301, Change 0 (lib/drivers/libusb/hub_controller.cpp:325) [USBUHCI] Port 1: Status 301, Change 0 (drivers/usb/usbuhci/hardware.cpp:734) Index 0 QueueHead F7847000 LinkPhysical 111022 ElementPhysical 1 PhysicalAddress 111000 Request 00000000 NextElementDescriptor 00000000 (drivers/usb/usbuhci/hardware.cpp:742) Index 1 QueueHead F7847020 LinkPhysical 111042 ElementPhysical 1 PhysicalAddress 111020 Request 00000000 NextElementDescriptor 00000000 (drivers/usb/usbuhci/hardware.cpp:751) Index 2 QueueHead F7847040 LinkPhysical 111062 ElementPhysical 1 PhysicalAddress 111040 Request 00000000 NextElementDescriptor 00000000 (drivers/usb/usbuhci/hardware.cpp:759) Index 3 QueueHead F7847060 LinkPhysical 111082 ElementPhysical 1 PhysicalAddress 111060 Request 00000000 NextElementDescriptor 00000000 (drivers/usb/usbuhci/hardware.cpp:767) Index 4 QueueHead F7847080 LinkPhysical 1 ElementPhysical 1 PhysicalAddress 111080 Request 00000000 NextElementDescriptor 00000000 (drivers/usb/usbuhci/hardware.cpp:834) [USBUHCI] Controller initialized (drivers/usb/usbuhci/hardware.cpp:383) Starting Controller (drivers/usb/usbuhci/hardware.cpp:472) [USBUHCI] USBCMD: 80 USBSTS 20 (drivers/usb/usbuhci/hardware.cpp:490) [USBUHCI] Status 0 (drivers/usb/usbuhci/hardware.cpp:501) [USBUHCI] USBCMD: 81 USBSTS 0 (drivers/usb/usbuhci/hardware.cpp:532) [USBUHCI] Controller Started (drivers/usb/usbuhci/hardware.cpp:533) [USBUHCI] Controller Status 0 (drivers/usb/usbuhci/hardware.cpp:534) [USBUHCI] Controller Cmd Status c1 (drivers/usb/usbuhci/hardware.cpp:535) [USBUHCI] Controller Interrupt Status d (drivers/usb/usbuhci/hardware.cpp:536) [USBUHCI] Controller Frame 24 (drivers/usb/usbuhci/hardware.cpp:537) [USBUHCI] Controller Port Status 0 80 (drivers/usb/usbuhci/hardware.cpp:538) [USBUHCI] Controller Port Status 1 80 (ntoskrnl/io/pnpmgr/pnpmgr.c:4028) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (lib/drivers/libusb/hub_controller.cpp:3922) CHubController::CreatePDO: DeviceName \Device\USBPDO-2 (ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbhub' for critical device 'USB#ROOT_HUB' (ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:699) ZwOpenKey() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:699) ZwOpenKey() failed with Status C0000034 (drivers/usb/usbhub/fdo.c:1641) Status 0, Result 0x00000040 (drivers/usb/usbhub/fdo.c:1642) InformationLevel 0 (drivers/usb/usbhub/fdo.c:1643) ActualLength 40 (drivers/usb/usbhub/fdo.c:1644) PortNumber 0 (drivers/usb/usbhub/fdo.c:1645) DeviceDescriptor 20000112 (drivers/usb/usbhub/fdo.c:1646) HubAddress 0 (drivers/usb/usbhub/fdo.c:1647) NumberofPipes 0 (drivers/usb/usbhub/fdo.c:1740) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 2 (drivers/usb/usbuhci/hardware.cpp:1161) [UHCI] SetPortFeature PortId 0 Feature 8 (drivers/usb/usbuhci/hardware.cpp:1161) [UHCI] SetPortFeature PortId 1 Feature 8 (ntoskrnl/io/pnpmgr/pnpmgr.c:4028) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:699) ZwOpenKey() failed with Status C0000034 (lib/drivers/libusb/libusb.cpp:33) USBLIB_AddDevice (drivers/usb/usbuhci/hardware.cpp:169) CUSBHardwareDevice::Initialize (ntoskrnl/io/iomgr/driver.c:699) ZwOpenKey() failed with Status C0000034 (hal/halx86/legacy/bus/pcibus.c:686) HAL: No PCI Resource Adjustment done! Hardware may malfunction (drivers/bus/pci/pdo.c:1272) Assigning IRQ 10 to PCI device 0x7d on bus 0x0 (drivers/bus/pci/pdo.c:1289) Enabling command flags for PCI device 0x7d on bus 0x0: [Bus master] [I/O space enable] (drivers/usb/usbuhci/hardware.cpp:255) CUSBHardwareDevice::PnpStart (drivers/usb/usbuhci/hardware.cpp:299) UHCI Base 0000FF20 Length ffff0020 (drivers/usb/usbuhci/hardware.cpp:607) [USBUHCI] InitializeController (drivers/usb/usbuhci/hardware.cpp:635) [USBUHCI] LEGSUP 10 (drivers/usb/usbuhci/hardware.cpp:640) [USBUHCI] Acquired ownership (drivers/usb/usbuhci/hardware.cpp:643) [USBUHCI] SBRN 10 (drivers/usb/usbuhci/hardware.cpp:573) Waiting 10 milliseconds for global reset (drivers/usb/usbuhci/hardware.cpp:1161) [UHCI] SetPortFeature PortId 0 Feature 4 (drivers/usb/usbuhci/hardware.cpp:734) Index 0 QueueHead F7843000 LinkPhysical 115022 ElementPhysical 1 PhysicalAddress 115000 Request 00000000 NextElementDescriptor 00000000 (drivers/usb/usbuhci/hardware.cpp:742) Index 1 QueueHead F7843020 LinkPhysical 115042 ElementPhysical 1 PhysicalAddress 115020 Request 00000000 NextElementDescriptor 00000000 (drivers/usb/usbuhci/hardware.cpp:751) Index 2 QueueHead F7843040 LinkPhysical 115062 ElementPhysical 1 PhysicalAddress 115040 Request 00000000 NextElementDescriptor 00000000 (drivers/usb/usbuhci/hardware.cpp:759) Index 3 QueueHead F7843060 LinkPhysical 115082 ElementPhysical 1 PhysicalAddress 115060 Request 00000000 NextElementDescriptor 00000000 (drivers/usb/usbuhci/hardware.cpp:767) Index 4 QueueHead F7843080 LinkPhysical 1 ElementPhysical 1 PhysicalAddress 115080 Request 00000000 NextElementDescriptor 00000000 (drivers/usb/usbuhci/hardware.cpp:834) [USBUHCI] Controller initialized (drivers/usb/usbuhci/hardware.cpp:383) Starting Controller (drivers/usb/usbuhci/hardware.cpp:472) [USBUHCI] USBCMD: 80 USBSTS 20 (drivers/usb/usbuhci/hardware.cpp:490) [USBUHCI] Status 0 (drivers/usb/usbuhci/hardware.cpp:501) [USBUHCI] USBCMD: 81 USBSTS 0 (drivers/usb/usbuhci/hardware.cpp:532) [USBUHCI] Controller Started (drivers/usb/usbuhci/hardware.cpp:533) [USBUHCI] Controller Status 0 (drivers/usb/usbuhci/hardware.cpp:534) [USBUHCI] Controller Cmd Status c1 (drivers/usb/usbuhci/hardware.cpp:535) [USBUHCI] Controller Interrupt Status d (drivers/usb/usbuhci/hardware.cpp:536) [USBUHCI] Controller Frame 24 (drivers/usb/usbuhci/hardware.cpp:537) [USBUHCI] Controller Port Status 0 80 (drivers/usb/usbuhci/hardware.cpp:538) [USBUHCI] Controller Port Status 1 80 (ntoskrnl/io/pnpmgr/pnpmgr.c:4028) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (lib/drivers/libusb/hub_controller.cpp:3922) CHubController::CreatePDO: DeviceName \Device\USBPDO-3 (ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbhub' for critical device 'USB#ROOT_HUB' (ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:699) ZwOpenKey() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:699) ZwOpenKey() failed with Status C0000034 (drivers/usb/usbhub/fdo.c:1641) Status 0, Result 0x00000040 (drivers/usb/usbhub/fdo.c:1642) InformationLevel 0 (drivers/usb/usbhub/fdo.c:1643) ActualLength 40 (drivers/usb/usbhub/fdo.c:1644) PortNumber 0 (drivers/usb/usbhub/fdo.c:1645) DeviceDescriptor 20000112 (drivers/usb/usbhub/fdo.c:1646) HubAddress 0 (drivers/usb/usbhub/fdo.c:1647) NumberofPipes 0 (drivers/usb/usbhub/fdo.c:1740) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 2 (drivers/usb/usbuhci/hardware.cpp:1161) [UHCI] SetPortFeature PortId 0 Feature 8 (drivers/usb/usbuhci/hardware.cpp:1161) [UHCI] SetPortFeature PortId 1 Feature 8 (ntoskrnl/io/pnpmgr/pnpmgr.c:4028) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:699) ZwOpenKey() failed with Status C0000034 (lib/drivers/libusb/libusb.cpp:33) USBLIB_AddDevice (ntoskrnl/io/iomgr/driver.c:699) ZwOpenKey() failed with Status C0000034 (hal/halx86/legacy/bus/pcibus.c:686) HAL: No PCI Resource Adjustment done! Hardware may malfunction (drivers/bus/pci/pdo.c:1272) Assigning IRQ 9 to PCI device 0xfd on bus 0x0 (drivers/bus/pci/pdo.c:1289) Enabling command flags for PCI device 0xfd on bus 0x0: [Bus master] [Memory space enable] (drivers/usb/usbehci/hardware.cpp:367) Controller has Length (drivers/usb/usbehci/hardware.cpp:368) Controller EHCI Version 100 (drivers/usb/usbehci/hardware.cpp:369) Controller EHCI Caps HCSParamsLong 104208 (drivers/usb/usbehci/hardware.cpp:370) Controller EHCI Caps HCCParamsLong 6871 (drivers/usb/usbehci/hardware.cpp:371) Controller has 8 Ports (drivers/usb/usbehci/hardware.cpp:256) Controller Port Routing Rules 0 (drivers/usb/usbehci/hardware.cpp:257) Number of Ports per Companion Controller 2 (drivers/usb/usbehci/hardware.cpp:258) Number of Companion Controller 4 (drivers/usb/usbehci/hardware.cpp:267) Controller has Debug Port Support At Port 1 (drivers/usb/usbehci/hardware.cpp:272) Controller has Extended Capabilities Support (drivers/usb/usbehci/hardware.cpp:287) Controller uses 64-Bit Addressing (drivers/usb/usbehci/hardware.cpp:489) Starting Controller (drivers/usb/usbehci/hardware.cpp:563) [EHCI] Extended Caps Support detected! (drivers/usb/usbehci/hardware.cpp:581) [EHCI] Controller is BIOS owned, acquring control (drivers/usb/usbehci/hardware.cpp:626) [EHCI] acquired ownership (drivers/usb/usbehci/hardware.cpp:714) Interrupt Mask 37 (drivers/usb/usbehci/hardware.cpp:813) UsbSts c000 (drivers/usb/usbehci/hardware.cpp:816) UsbCmd.PeriodicEnable 1 (drivers/usb/usbehci/hardware.cpp:817) UsbCmd.AsyncEnable 1 (drivers/usb/usbehci/hardware.cpp:818) UsbCmd.IntThreshold 8 (drivers/usb/usbehci/hardware.cpp:819) UsbCmd.Run 1 (drivers/usb/usbehci/hardware.cpp:820) UsbCmd.FrameListSize 0 (drivers/usb/usbehci/hardware.cpp:827) EHCI Started! (drivers/usb/usbehci/hardware.cpp:1394) Device connected on port 0 (drivers/usb/usbehci/hardware.cpp:1405) Low speed device connected. Releasing ownership (drivers/usb/usbehci/hardware.cpp:1394) Device connected on port 1 (drivers/usb/usbehci/hardware.cpp:1405) Low speed device connected. Releasing ownership (drivers/usb/usbehci/hardware.cpp:1418) Device disconnected on port 0 (drivers/usb/usbehci/hardware.cpp:1418) Device disconnected on port 1 (drivers/usb/usbehci/hardware.cpp:1418) Device disconnected on port 0 (drivers/usb/usbehci/hardware.cpp:1418) Device disconnected on port 1 (ntoskrnl/io/pnpmgr/pnpmgr.c:4028) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (lib/drivers/libusb/hub_controller.cpp:3922) CHubController::CreatePDO: DeviceName \Device\USBPDO-4 (ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbhub' for critical device 'USB#ROOT_HUB20' (ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:699) ZwOpenKey() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:699) ZwOpenKey() failed with Status C0000034 (drivers/usb/usbhub/fdo.c:1641) Status 0, Result 0x00000040 (drivers/usb/usbhub/fdo.c:1642) InformationLevel 0 (drivers/usb/usbhub/fdo.c:1643) ActualLength 40 (drivers/usb/usbhub/fdo.c:1644) PortNumber 0 (drivers/usb/usbhub/fdo.c:1645) DeviceDescriptor 20000112 (drivers/usb/usbhub/fdo.c:1646) HubAddress 0 (drivers/usb/usbhub/fdo.c:1647) NumberofPipes 0 (drivers/usb/usbhub/fdo.c:1740) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 8 (ntoskrnl/io/pnpmgr/pnpmgr.c:4028) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:699) ZwOpenKey() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:699) ZwOpenKey() failed with Status C0000034 (drivers/bus/pci/pdo.c:1289) Enabling command flags for PCI device 0x1e on bus 0x0: None (drivers/bus/pci/fdo.c:586) Unknown IOCTL 0x9 (drivers/bus/pci/fdo.c:586) Unknown IOCTL 0x14 (ntoskrnl/io/pnpmgr/pnpmgr.c:4028) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (ntoskrnl/mm/ARM3/sysldr.c:3007) ZwOpenFile failed for '\SystemRoot\system32\drivers\vbemp.sys' with status 0xc000003a (drivers/usb/usbuhci/hardware.cpp:905) [UHCI] ResetPort Id 0 (drivers/usb/usbuhci/hardware.cpp:938) Waiting 20 milliseconds for port reset (lib/drivers/libusb/hub_controller.cpp:314) [USBUHCI] SCE Request B10010C0 TransferBufferLength 8 Flags 3 MDL 00000000 (lib/drivers/libusb/hub_controller.cpp:325) [USBUHCI] Port 0: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:325) [USBUHCI] Port 1: Status 100, Change 0 (drivers/usb/usbuhci/hardware.cpp:1015) [USBUhci] Port Index 0 Status after reset 185 (lib/drivers/libusb/hub_controller.cpp:314) [USBUHCI] SCE Request B12C9C38 TransferBufferLength 8 Flags 3 MDL 00000000 (lib/drivers/libusb/hub_controller.cpp:325) [USBUHCI] Port 0: Status 303, Change 10 (lib/drivers/libusb/hub_controller.cpp:333) [USBUHCI] Change state on port 0 (lib/drivers/libusb/hub_controller.cpp:325) [USBUHCI] Port 1: Status 301, Change 1 (ntoskrnl/io/iomgr/arcname.c:386) Boot device found (lib/drivers/libusb/hub_controller.cpp:333) [USBUHCI] Change state on port 1 (lib/drivers/libusb/hub_controller.cpp:314) [USBUHCI] SCE Request B12AE118 TransferBufferLength 8 Flags 3 MDL 00000000 (lib/drivers/libusb/hub_controller.cpp:325) [USBUHCI] Port 0: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:325) [USBUHCI] Port 1: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:314) [USBUHCI] SCE Request B0FFC818 TransferBufferLength 8 Flags 3 MDL 00000000 (lib/drivers/libusb/hub_controller.cpp:325) [USBUHCI] Port 0: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:325) [USBUHCI] Port 1: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:314) [USBEHCI] SCE Request B10AFC78 TransferBufferLength 32 Flags 3 MDL 00000000 (lib/drivers/libusb/hub_controller.cpp:325) [USBEHCI] Port 0: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:325) [USBEHCI] Port 1: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:325) [USBEHCI] Port 2: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:325) [USBEHCI] Port 3: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:325) [USBEHCI] Port 4: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:325) [USBEHCI] Port 5: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:325) [USBEHCI] Port 6: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:325) [USBEHCI] Port 7: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:2689) USBHI_CreateUsbDevice (lib/drivers/libusb/hub_controller.cpp:3981) There was no pending IRP for SCE. Did the usb hub 2.0 driver (usbhub2) load? (drivers/usb/usbehci/hardware.cpp:1269) EHCI: Host System Error! (lib/drivers/libusb/usb_device.cpp:314) [USBUHCI] SetDeviceAddress> Address 1 (ntoskrnl/mm/ARM3/sysldr.c:174) Loading: \SystemRoot\system32\drivers\vbemp.sys at F7834000 with 9 pages (lib/drivers/libusb/hub_controller.cpp:3981) There was no pending IRP for SCE. Did the usb hub 2.0 driver (usbhub2) load? (ntoskrnl/mm/ARM3/sysldr.c:174) Loading: \SystemRoot\system32\drivers\videoprt.sys at F781D000 with 17 pages (ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:699) ZwOpenKey() failed with Status C0000034 Formatted registry key '\Registry\Machine\System\CurrentControlSet\Services\VBE' -> '\Registry\Machine\System\CurrentControlSet\Hardware Profiles\Current\System\CurrentControlSet\Services\VBE\Device0' WARNING: ExUuidCreate at ntoskrnl/ex/uuid.c:305 is UNIMPLEMENTED! (win32ss/drivers/videoprt/registry.c:312) Failed to open device software key. Status 0xc0000034(ntoskrnl/io/iomgr/driver.c:699) ZwOpenKey() failed with Status C0000034 (hal/halx86/legacy/bus/pcibus.c:686) HAL: No PCI Resource Adjustment done! Hardware may malfunction (drivers/bus/pci/pdo.c:1272) Assigning IRQ 11 to PCI device 0x2 on bus 0x0 (drivers/bus/pci/pdo.c:1289) Enabling command flags for PCI device 0x2 on bus 0x0: [Bus master] [Memory space enable] [I/O space enable] (ntoskrnl/io/pnpmgr/pnpmgr.c:848) IRP_MN_QUERY_CAPABILITIES failed with status 0xc00000bb (ntoskrnl/io/pnpmgr/pnpmgr.c:681) IopInitiatePnpIrp() failed (Status 0xc00000bb) (ntoskrnl/io/pnpmgr/pnpmgr.c:4028) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (ntoskrnl/mm/ARM3/sysldr.c:174) Loading: \SystemRoot\system32\drivers\floppy.sys at F780A000 with 13 pages (lib/drivers/libusb/hub_controller.cpp:3981) There was no pending IRP for SCE. Did the usb hub 2.0 driver (usbhub2) load?