=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.08.03 23:29:26 =~=~=~=~=~=~=~=~=~=~=~= (ntoskrnl/kd/kdio.c:376) ----------------------------------------------------- (ntoskrnl/kd/kdio.c:377) ReactOS 0.4-SVN (Build 20140723-r63733) (ntoskrnl/kd/kdio.c:379) 1 System Processor [3069 MB Memory] (ntoskrnl/kd/kdio.c:380) Command Line: DEBUG DEBUGPORT=COM1 BAUDRATE=9600 SOS MIPaths: multi(0)disk(0)cdrom(31) \ (ntoskrnl/ke/i386/cpu.c:494) Supported CPU features : KF_V86_VIS KF_RDTSC KF_CR4 KF_CMOV KF_GF_CMPXCHG8B KF_MMX KF_WORKING_PTE KF_PAT KF_FXSR KF_FAST_SYSCALL KF_XMMI KF_3DNOW KF_XMMI64 KF_NX_BIT (ntoskrnl/ke/i386/cpu.c:801) Prefetch Cache: 64 bytes L2 Cache: 524288 bytes L2 Cache Line: 64 bytes L2 Cache Associativity: 16 I/O Mapping at FFFE0000 is unsafe (ntoskrnl/mm/mminit.c:260) 0x80000000 - 0x84400000 Boot Loaded Image (ntoskrnl/mm/mminit.c:264) 0xB0000000 - 0xB14FC000 PFN Database (ntoskrnl/mm/mminit.c:268) 0xB14FC000 - 0xB7474000 ARM3 Non Paged Pool (ntoskrnl/mm/mminit.c:272) 0xB9400000 - 0xBB400000 System View Space (ntoskrnl/mm/mminit.c:276) 0xBB400000 - 0xC0000000 Session Space (ntoskrnl/mm/mminit.c:279) 0xC0000000 - 0xC03FFFFF Page Tables (ntoskrnl/mm/mminit.c:282) 0xC0300000 - 0xC0300FFF Page Directories (ntoskrnl/mm/mminit.c:285) 0xC0400000 - 0xC07FFFFF Hyperspace (ntoskrnl/mm/mminit.c:289) 0xE1000000 - 0xECC00000 ARM3 Paged Pool (ntoskrnl/mm/mminit.c:292) 0xECC00000 - 0xF7BE0000 System PTE Space (ntoskrnl/mm/mminit.c:295) 0xF7BE0000 - 0xFFBE0000 Non Paged Pool Expansion PTE Space (ntoskrnl/config/cmcheck.c:25) CmCheckRegistry(0xB7200008, 2) is UNIMPLEMENTED! (hal/halx86/legacy/bussupp.c:594) Your machine has a PCI-to-PCI or CardBUS Bridge. PCI devices may fail! (hal/halx86/legacy/bussupp.c:623) Found parent bus (indicating PCI Bridge). PCI devices may fail! ====== PCI BUS HARDWARE DETECTION ======= 00:00.0 Host b00] (rev 00) Subsystem: Unknown [1022:9600] Flags: bus master, 66MHz, medium devsel, latency 32 Memory at e0000000 (64-bit, non-prefetchable) [size=512M] 00:02.0 PCI bridge [0604]: Unknown device [1022:9603] (rev 00) Subsystem: Unknown [0000:0000] Flags: bus master, fast devsel, latency 0, IRQ 03 Memory at 00010100 (32-bit, non-prefetchable) [size=256] I/O ports at 2000e1e0 [size=32] Memory at fde0fde0 (32-bit, non-prefetchable) [size=256] I/O ports at dff1c000 [size=16K] 00:04.0 PCI bridge [0604]: Unknown device [1022:9604] (rev 00) Subsystem: Unknown [0000:0000] Flags: bus master, fast devsel, latency 0, IRQ 05 Memory at 00020200 (32-bit, non-prefetchable) [size=512] I/O ports at 2000d1d0 [size=16] Memory at fdd0fdd0 (32-bit, non-prefetchable) [size=256] I/O ports at fdc1fdc0 [size=64] 00:0a.0 PCI bridge [0604]: Unknown device [1022:9609] (rev 00) Subsystem: Unknown [0000:0000] Flags: bus master, fast devsel, latency 0, IRQ 03 Memory at 00030300 (32-bit, non-prefetchable) [size=256] I/O ports at 2000c1c0 [size=64] Memory at fd90fd90 (32-bit, non-prefetchable) [size=256] I/O ports at fdf1fdf0 [size=16] 00:11.0 SATA controller [0106]: Unknown device [1002:4391] (rev 00) Subsystem: Unknown [1458:b002] Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 10 I/O ports at ff00 [size=256] I/O ports at fe00 [size=512] I/O ports at fd00 [size=256] I/O ports at fc00 [size=1K] I/O ports at fb00 [size=256] Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Device is using IRQ 10! ISA Cards using that IRQ may fail! 00:12.0 USB controller [0c03]: Unknown device [1002:4397] (rev 00) Subsystem: Unknown [1458:5004] Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 05 Memory at fe02e000 (32-bit, non-prefetchable) [size=8K] Device is using IRQ 5! ISA Cards using that IRQB) PCI Expansion Card. Turn off Legacy USB in your BIOS! 00:12.1 USB controller [0c03]: Unknown device [1002:4398] (rev 00) Subsystem: Unknown [1458:5004]evsel, latency 32, IRQ 05 Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Device is using IRQ 5! ISA Cards using that IRQ may fail! Device is an OHCI (USB) PCI Expansion Card. Tu 00:12.2 USB controller [0c03]: Unknown device [1002:4396] (rev 00) Subsystem: Unknown [1458:5004] Flags: 66MHz, medium devsel, latency 32, IRQ 11 Memory at fe02c000 (32-bit, non-prefetchable) [size=16K] Device is using IRQ 11! ISA Cards using that IRQ may fail! 00:13.0 USB controller [0c03]: Unknown device [1002:4397] (rev 00) Subsystem: Unknown [1458:5004] Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 03 Memory at fe02b000 (32-bit, non-prefetchable) [size=4K] Device is using IRQ 3! ISA Cards using that IRQ may fail! Device is an OHCI Legacy USB in your BIOS! 00:13.1 USB controller [0c03]: Unknown device [1002:4398] (rev 00) Subsystem: Unknown [1458:5004] Flags: bus master, 66MHz, meemory at fe02a000 (32-bit, non-prefetchable) [size=8K] Device is using IRQ 3! ISA Cards using that IRQ may fail! Device is an OHCI (USB) PCI Expansion Card. Turn off Legacy USB in your BIOS! 00:13.2 USB controller [0cev 00) Subsystem: Unknown [1458:5004] Flags: 66MHz, medium devsel, latency 32, IRQ 11 Memory at fe029000 (32-bit, non-prefetchable) [size=4K] Device is using IRQ 11! ISA Cards using that IRQ may fail! 00:14.0 SMBus [0c05]: Unknown device [1002:4385] (rev 3a) Subsystem: Unknown [1458:4385] Flags: 66MHz, medium devsel, latency 0 00:1 device [1002:439c] (rev 00) Subsystem: Unknown [1458:5002] Flags: bus master, 66MHz, medium devsel, latency 32, IRQ assignment required I/O ports at 0000 I/O ports at 0000 I/O ports at 0000 I/O ports at 0000 I/O ports at fa00 [size=512] 00:14.2 Audio device [0403]: Unknown device [1002:4383] (rev 00) Subsystem: Unknown [1458:a022] Flags: bus master, slow devsel, latency 32, IRQ 05 Memory at fe024000 (64-bit, non-prefetchable) [size=16K] Device is using IRQ 5! ISA Cards using that IRQ may fail! 00:14.3 ISA bridge [0601]: Unknown device [1002:439d] (rev 00) Subsystem: Unknown [1002:439d] Flags: bus master, 66MHz, medium devsel, latency 0 00:14.4 PCI bridge [0604]: Unknown device [1002:4384] (rev 00) Subsystem: Unknown [0000:0000] Flags: bus master, 66MHz, medium devsel, latency 64 Memory at 40040400 (32-bit, non-prefetchable) [size=1K] Memory at 2280b0b0 (32-bit, non-prefetchable) [size=4K] Memory at fdb0fdb0 (32-bit, non-prefetchable) [size=256] Memory at fda0fda0 (32-bit, non-prefetchable) [size=256] 00:14.5 USB controller [0c03]: Unknown device [1002:4399] (rev 00) Subsystem: Unknown [1458:5004] Flags: bus master, RQ 03 Memory at fe028000 (32-bit, non-prefetchable) [size=32K]s using that IRQ may fail! Device is an OHCI (USB) PCI Expansion Card. Turn off Legacy USB in your BIOS! 00:18.0 Host bridge [0600]: Unknown device [1022:1200] (rev 00) Subsystem: Unknown [0000:0000] Flags: fast devsel, latency 0 00:18.1 Host bridge [0600]: Unknown device [1022:1201] (rev 00) Subsystem: Unknown [0000:0000] Flags: fast devsel, latency 0 00:18.2 Host bridge [0600]: Unknown device [1022:1202] (rev 00) Subsystem: Unknown [0000:0000] Flags: fast devsel, latency 0 00:18.3 Host bridge [0600]: Unknown device [1022:1203] (rev 00) Subsystem: Unknown [0000:0000] Flags: fast devsel, latency 0 00:18.4 Host bridge [0600]: Unknown device [1022:1204] (rev 00) Subsystem: Unknown [0000:0000] Flags: fast devsel, latency 0 01:00.0 VGA compatible controller [0300]: Unknown device [1002:6658] (rev 00) Subsystem: Unknown [1787:200f] Flags: bus master, fast devsel, latency 0, IRQ 03 Memory at c0000000 (64-bit, prefetchable) [size=1024M] Memory at df800000 (64-bit, prefetchable) [size=8M] I/O ports at ee00 [size=512] Memory at fde80000 (32-bit, non-prefeing IRQ 3! ISA Cards using that IRQ may fail! 01:00.1 Audio device [0403]: Unknown device [1002:aac0] (rev 00) Subsystem: Unknown [1787:aac0] Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at fdefc000 (64-bit, non-prefetchable) [size=16K] Device is using IRQ 11! ISA Cards using that IRQ may fail! 02:00.0 SATA controller [0106]: Unknown device [1b4b:9123] (rev 11) Subsystem: Unknown [1b4b:9123] Flags: bus master, fast devsel, latency 0, IRQ 05 I/O ports at df00 [size=256] I/O ports at de00 [size=512] I/O ports at dd00 [size=256] I/O ports at dc00 [size=1K] I/O ports at db00 [size=256] Memory at fddff000 (32-bit, non-prefetchable) [size=4K] Device is using IRQ 5! ISA Cards using that IRQ may fail! 02:00.1 IDE interface [0101]: Unknown device [1b4b:91a4] (rev 11) Subsystem: Unknown [1b4b:91a4] Flags: bus master, fast devsel, latency 0, IRQ 11 I/O ports at da00 [size=512] I/O ports at d900 [size=256] I/O ports at d800 [size=2K] I/O ports at d700 [size=256] I/O ports at d600 [size=512] Memory at fddfe000 (32-bit, non-prefetchable) [size=8K] 03:00.0 Ethernet controller [0200]: Unknown device [10ec:8168] (rev 02) Subsystem: Unknown [1evsel, latency 0, IRQ 03 I/O ports at ce00 [size=512] Memory at fdfff000 (64-bit, prefetchable) [size=4K] Memory at fdfe0000 (64-bit, prefetchable) [size=128K] Device is using IRQ 3! ISA Cards using that IRQ may fail! 04:06.0 Ethernet controller [0200]: Unknown device [10ec:8139] (rev 10) Subsystem: Unknown [10ec:8139] Flags: bus master, medium devsel, latency 64, IRQ 07 I/O ports at be00 [size=512] Memory at fdbff000 (32-bit, non-prefetchable) [size=4K] Device is using IRQ 7! ISA Cards using that IRQ may fail! ====== PCI BUS DETECTION COMPLETE ======= PC Compatible Eisa/Isa HAL Detected (ntoskrnl/io/pnpmgr/pnpmgr.c:3190) Firmware mapper is enabled (ntoskrnl/io/pnpmgr/pnpreport.c:353) Reported device: DETECTEDInternal\PCI_HAL (Root\PCI_HAL\0) SAC DriverEntry: Entering. (ntoskrnl/io/iomgr/driver.c:1629) '\Driver\SACDRV' initialization failed, status (0xc0000037) (ntoskrnl/io/iomgr/driver.c:61) Deleting driver object '\Driver\SACDRV' ATAPI IDE MiniPort Driver (UniATA) v 0.45a3 Parameter PrintLogo Parameter PrintLogo = 0x0 UniATA Init: OS should be ReactOS UniATA Init: OS ver 4.1 (1), 1 CPU(s) Performance calibration: dt=14995, counter=3012360 InitBadBlocks general InitBadBlocks returned: 0xc0000034 UniataInitAtaCommands: Parameter SkipRaids Parameter SkipRaids = 0x1 Parameter ForceSimplex Parameter ForceSimplex = 0x0 Parameter LogToDisplay Parameter LogToDisplay = 0x0 HwInitializationDataSize = 50 set NeedPhysicalAddresses = TRUE set AtapiAdapterControl() ptr ATAPI IDE enum supported BusMaster Devices Parameter VirtualMachineType Parameter VirtualMachineType = 0x0 Parameter VirtualBox Parameter VirtualBox = 0x0 -- BusID: 0x0:0x11:0x0 Storage Class DevId = 43911002 Class = 0001/0006, ProgIf 01 Parameter Include Parameter Include = 0x0 No force include, check exclude Parameter Exclude Parameter Exclude = 0x0 Default device found, pass 0 InterruptPin = 0x1 InterruptLine = 0xa Enabling Mem/Io spaces and busmastering... Initial pciData.Command = 0x7 PCI_ENABLE_IO_SPACE PCI_ENABLE_MEMORY_SPACE PCI_ENABLE_BUS_MASTER InterruptLine = 0xa Final pciData.Command = 0x7 Range 0 = 0xff01 Range 1 = 0xfe01 Range 2 = 0xfd01 Range 3 = 0xfc01 Range 4 = 0xfb01 Range 5 = 0xfe02f000 count: BMListLen++ -- BusID: 0x0:0x14:0x1 Storage Class DevId = 439C1002 Class = 0001/0001, ProgIf 8A Parameter Include Parameter Include = 0x0 No force include, check exclude Parameter Exclude Parameter Exclude = 0x0 Default device found, pass 0 InterruptPin = 0x1 InterruptLine = 0xff Enabling Mem/Io spata.Command = 0x5 PCI_ENABLE_IO_SPACE PCI_ENABLE_MEMORY_SPACE New pciData.Command = 0x5 PCI_ENABLE_BUS_MASTER InterruptLine = 0xff Final pciData.Command = 0x5 Range 4 = 0xfa01 count: BMListLen++ -- BusID: 0x2:0x0:0x0 Storage Class DevId = 91231B4B Class = 0001/0006, ProgIf 01 Parameter Include Parameter Include = 0x0 No force include, check exclude Parameter Exclude Parameter Exclude = 0x0 unknown Default device found, pass 0 InterruptPin = 0x1 InterruptLine = 0x5 Range 0 = 0xdf01 Range 1 = 0xde01 Range 2 = 0xdd01 Range 3 = 0xdc01 Range 4 = 0xdb01 Range 5 = 0xfddff000 count: BMListLen++ -- BusID: 0x2:0x0:0x1 Storage Class DevId = 91A41B4B Class = 0001/0001, ProgIf 8F Parameter Include Parameter Include = 0x0 No force include, check exclude Parameter Exclude Parameter Exclude = , pass 0 InterruptPin = 0x2 InterruptLine = 0xb Range 0 = 0xda01 Range 1 = 0xd901 Range 2 = 0xd801 Range 3 = 0xd701 Range 4 = 0xd601 Range 5 = 0xfddfe000 count: BMListLen++ -- BusID: 0x0:0x11:0x0 Storage Class DevId = 43911002 Class = 0001/0006, ProgIf 01 Parameter Include Parameter Include = 0x0 No force include, check exclude Parameter Exclude Parameter Exclude = 0x0 Default device found, pass 1 InterruptPin = 0x1 InterruptLine = 0xa Range 0 = 0xff01 Range 1 = 0xfe01 Range 2 = 0xfd01 Range 3 = 0xfc01 Range 4 = 0xfb01 Range 5 = 0xfe02f000 found suitable device -- BusID: 0x0:0x14:0x1 Storage Class DevId = 439C1002 Class = 0001/0001, ProgIf 8A Parameter Include Parameter Include = 0x0 No force include, check exclude Parameter Exclude Parameter Exclude = 0x0 Default device found, pass 1 InterruptPin = 0x1 InterruptLine = 0xff Range 4 = 0xfa01 found suitable device Parameter NativePCIMode Parameter NativePCIMode = 0x0 Add to BMList, AltInit 0 -- BusID: 0x2:0x0:0x0 Storage Class DevId = 91231B4B Class = 0001/0006, ProgIf 01 Parameter Include Parameter Include = 0x0 No force include, check exclude Parameter Exclude Parameter Exclude = 0x0 unknown Default device found, pass 1 InterruptPin = 0x1 InterruptLine = 0x5 Range 0 = 0xdf01 Range 1 = 0xde01 Range 2 = 0xdd01 Range 3 = 0xdc01 Range 4 = 0xdb01 Range 5 = 0xfddff000 found suitable device -- BusID: 0x2:0x0:0x1 Storage Class DevId = 91A41B4B Class = 0001/0001, ProgIf 8F Parameter Include Parameter Include = 0x0 No force include, check exclude Parameter Exclude Parameter Exclude = 0x0 unknown Default device found, pass 1 InterruptPin = 0x2 InterruptLine = 0xb Range 0 = 0xda01 Range 1 = 0xd901 Range 2 = 0xd801 Range 3 = 0xd701 Range 4 = 0xd601 Range 5 = 0xfddfe000 found suitable device -- BusID: 0x0:0x11:0x0 Storage Class DevId = 43911002 Class = 0001/0006, ProgIf 01 Parameter Include Parameter Include = 0x0 No force include, check exclude Parameter Exclude Parameter Exclude = 0x0 Default device found, pass 2 InterruptPin = 0x1 InterruptLine = 0xa Range 0 = 0xff01 Range 1 = 0xfe01 Range 2 = 0xfd01 Range 3 = 0xfc01 Range 4 = 0xfb01 Range 5 = 0xfe02f000 found suitable device Add to BMList, AltInit 0 -- BusID: 0x0:0x14:0x1 Storage Class DevId = 439C1002 Class = 0001/0001, ProgIf 8A Parameter Include Parameter Include = 0x0 No force include, check exclude Parameter Exclude Parameter Exclude = 0x0 Default device found, pass 2 InterruptPin = 0x1 InterruptLine = 0xff Range 4 = 0xfa01 found suitable device -- BusID: 0x2:0x0:0x0 Storage Class DevId = 91231B4B Class = 0001/0006, ProgIf 01 Parameter Include Parameter Include = 0x0 No force include, check exclude Parameter Exclude Parameter Exclude = 0x0 unknown DefatPin = 0x1 InterruptLine = 0x5 Range 0 = 0xdf01 Range 1 = 0xde01 Range 2 = 0xdd01 Range 3 = 0xdc01 Range 4 = 0xdb01 Range 5 = 0xfddff000 found suitable device Add to BMList, AltInit 0 -- BusID: 0x2:0x0:0x1 Storage Class DevId = 91A41B4B Class = 0001/0001, ProgIf 8F Parameter Include Parameter Include = 0x0 No force include, check exclude Parameter Exclude Parameter Exclude = 0x0 unknown Default device found, pass 2 InterruptPin = 0x2 InterruptLine = 0xb Range 0 = 0xda01 Range 1 = 0xd901 Range 2 = 0xd801 Range 3 = 0xd701 Range 4 = 0xd601 Range 5 = 0xfddfe000 found suitable device Add to BMList, AltInit 0 BMListLen=4 Parameter WaitBusyCount Parameter WaitBusyCount = 0xc8 Parameter WaitBusyDelay Parameter WaitBusyDelay = 0xa Parameter WaitDrqDelay Parameter WaitDrqDelay = 0xa Parameter WaitBusyLongCount Parameter WaitBusyLongCount = 0x7d0 Parameter WaitBusyLongDelay Parameter WaitBusyLongDelay = 0xfa Parameter AtapiSendDisableIntr Parameter AtapiSendDisableIntr = 0x0 Parameter AtapiDmaRawRead Parameter AtapiDmaRawRead = 0x1 Parameter MaxIsrWait Parameter MaxIsrWait = 0x28 ATAPI IDE: Look for legacy ISA-bridged PCI IDE controller (onboard) ATAPI IDE: BMListLen 4 Parameter IgnoreIsaCompatiblePci Parameter IgnoreIsaCompatIIDE: (hal/halx86/legacy/bussupp.c:1159) Slot assignment for 5 on bus 0 (hal/halx86/legacy/bus/pcibus.c:715) WARNING: PCI Slot Parameter IgnoreIsaCompatiblePci Parameter IgnoreIsaCompatiblePci = 0x0 Try init channel 0, method 0 UniataFindBusMasterController: Context=0, BMListLen=4 ConfigInfo->Length 8c AdapterInterfaceType: Isa bm_offset 0, channel 0 AdapterInterfaceType=0x1 IoBusNumber=0x0 slotNumber=0x34 busDataRead DevId = 439C1002 Class = 0001/0001 Storage Class MasterDev (1) UniataCh ForceSimplex Parameter ForceSimplex = 0x0 i: 0x15 VendorID/DeviceID/Rev 0x1002/0x439c/0x0 i: 0x8 HwFlags: 0x0 Parameter HwFlagsOverride Parameter HwFlagsOverride = 0x0 HwFlagsOverride: 0x0 Parameter HwFlagsAdd gsAdd: 0x0 HwFlags (final): 0x0 MaxTransferMode: 0x46 Parameter MaxTransferMode Parameter MaxTransferMode = 0x46 MaxTransferMode (overriden): 0x46 UniataChipDetectChannels: MasterDev -> 1 chan ATI IXP700 AtapiFindListedDev: lim=ffffffff, Bus=0, Slot=ffffffff scanning range Bus 0-0, Slot 0-1f AtapiFindListedDev: found AtapiFindListedDev: b:s:f(0:14:0) 1002/4385/3a SATA controller enabled (secondary channel) New ATI PATA 1 chan allocate 2 Luns for 1 channels ATI ForceSimplex = 0 HwFlags = 0 (0)HwFlags = 0 (1)HwFlags = 0 (2)found suitable device HwFlags = 0 (3)Range 4 = 0xfa01 IsBusMaster == TRUE AtapiGetIoRange: AtapiGetIoRange: rid 0x4, start 0x0, offs 0x0, len 0x8, mem 0x0 AtapiGetIoR devExt 0xb71fc9a4 AtapiReadChipConfig: dev 0x0, ph chan -1 Parameter ForceSimplex Parameter ForceSimplex = 0x0 MaxTransferMode (base): 0x46 Parameter MaxTransferMode Parameter MaxTransferMode = 0x46 MaxTransferMode (overriden): 0x46 Parameter AtapiDmaZeroTransfer Parameter AtapiDmaZeroTransfer = 0x0 Parameter AtapiDmaControlCmd Parameter AtapiDmaControlCmd = 0x0 Parameter AtapiDmaRawRead Parameter AtapiDmaRawRead = 0x1 Parameter AtapiDmaReadWrite Parameter AtapiDmaReadWrite = 0x1 AtapiChipInit: dev 0x0, ph chan -2, c -1 HwFlags: 0x0 VendorID/DeviceID/Rev 0x1002/0x439c/0x0 re-enable IO resources of MasterDev Enabling Mem/Io spaces and busmastering... Initial pciData.Command = 0x5 PCI_ENABLE_IO_SPACE PCI_ENABLE_MEMORY_SPACE New pciData.Command = 0x5 PC = 0xff Final pciData.Command = 0x5 ATI AtapiChipInit: dev 0x0, ph chan 0, c 0 HwFlags: 0x0 VendorID/DeviceID/Rev 0x1002/0x439c/0x0 ATI simplexOnly = 0 (2)MasterDev (2) 1 channels & 1 irq for 1 controller update ConfigInfo->nt4 using AtaReq sz 1000 update ConfigInfo->w2k: 64bit 0 chan[0] InterruptMode: 1, Level 14, Level2 0, Vector 0, Vecist[i].channel 0x0, NumberChannels 0x1, channel 0x0 de 0xb71fc9a4, Channel 0x0 chan = 0xb71fb008 AtapiSetupLunPtrs for channel 0 of 1, 2 luns Chan 0xb71fb008 Lun 0x0 Lun ptr 0xb7431008 Lun 0x1 Lun ptr 0xb7431310 AtapiReadChipConfig: devExt 0xb71fc9a4 AtapiReadChipConfig: dev 0x0, ph chan 0 Parameter MaxTransferMode Parameter MaxTransferMode = 0x46 MaxTransferMode (overriden): 0x46 Parameter ReorderEnable Parameter ReorderEnable = 0x1 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x46 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x46 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Paramet0xffffffff Parameter Hidden Parameter Hidden = 0x0 set AccessRanges Getting IO ranges IO range 1 0x1f0 IO range 2 0x3f6 IDX_IO1 0->1f0(io) IDX_IO2 10->3f6(io) IDX_BM_IO 14->fa00(io) IDX_SATA_IO 19->0(io) AltStatus (0x50) Reg_0x1 (0x1f1) = 0x0 Reg_0x2 (0x1f2) = 0x3 Reg_0x3 (0x1f3) = 0xe Reg_0x4 (0x1f4) = 0x0 Reg_0x5 (0x1f5) = 0x0 Reg_0x6 (0x1f6) = 0xa0 Reg_0x7 (0x1f7) = 0x50 BM_0x0 (0xfa00) = 0x0 BM_0x1 (0xfa01) = 0x0 BM_0x2 (0xfa02) = 0x20 BM_0x3 (0xfa03) = 0x0 clean IDE intr 0 clean IDE intr 1 DMA status 0x20 claim Compatible controller claim Primary AtapiDmaAlloc: allocate tmp buffers below 4Gb exit: init spinlock MasterDev=0x1, NumberChannels=0x1, Isr2DevObj=0xb71fc038 Init ISR: Unnecessary MasterDev=0x1, NumberChannels=0x1, Isr2DevObj=0xb71fc038 do not tell system, that we know about PCI IO ranges final chan[1] InterruptMode: 1, Level 14, Level2 0, Vector 0, Vector2 0 return SP_RETURN_FOUND Attempt 0 of MasterDev ok (ntoskrnl/io/iomgr/iorsrce.c:874) IoReportResourceUsage is halfplemented! AtapiHwInitialize: (base) mark chan 0 of master controller [0] as inited AtapiChipInit: dev 0xffffffff, ph chan -1, c -1 HwFlags: 0x0 VendorID/DeviceID/Rev 0x1002/0x439c/0x0 re-enable IO resources of MasterDev Enabling Mem/Io spaces and busmastering... Initial pciData.Command = 0x5 PCI_ENABLE_IO_SPACE PCI_ENABLE_MEMORY_SPACE New pciData.Command = 0x5 PCI_ENABLE_BUS_MASTER InterruptLine = 0xff Final pciData.Command = 0x5 ATI AtapiChipInit: dev 0xffffffff, ph chan 0, c 0 HwFlags: 0x0 VendorID/DeviceID/Rev 0x1002/0x439c/0x0 ATI FindDevices: AtapiDisableInterrupts_0: 0 max_ldev 2 CheckDevicdev AtapiSoftReset: statusByte2 50: DMA status 0x20 ATAPI at home ATAPI at home CheckDevice: status 0x0 CheckDevice: ATAPI signature found IssueIdentify: Checking for ATAPI. Status (0x0) IssueIdentify: Checking for ATAPI (2). Status (0x0) AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0 IssueIdentify: IDE_STATUS_DRQ (0x58) IssueIdentify: Status before read words 0x58 IssueIdentify: statusByte 0x58 IssueIdentify: BASE statusByte 0x58 use 16bit IO IssueIdentify: suck data port IssueIdentify: statusByte 0x50 IssueIdentify: statusByte 0x50 IssueIdentify: Status after read words 0x50 Model: IPNOEE RVD-DWR VD-R FW: .114 S/N: E Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 10/1f SATA: 0 SATA support: 0, CAPs 0x0 OrigTransferMode: 44, Active: 44 Accoustic 0, cur 0 AdvPowerMode 0, cur 0 InitBadBlocks local LunExt 0xb7431008 S/N:PIONEER_DVD-RW__DVR-110D________________- IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. (0x50) CheckDevice: Device 0x0 is ATAPI CheckDevice: check status: found CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 50: DMA status 0x20 HDD at home HDD at home CheckDevice: or IDE. Status (0x0) IssueIdentify: statusByte != IDE_STATUS_IDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found FindDevices: select 0 dev to clear INTR FindDevices: statusByte=0x50 FindDevices: select 1 dev to clear INTR FindDevices: statusByte=0x1 FindDevices: select 0 dev on exit AtapiEnableInterrupts_0: 1 FindDevices: returning 1 AtapiHwInitialize: lChannel 0x0, dev 0 AtapiDisableInterrupts_0: 0 AtapiHwInitialize: ATAPI/Changer branch try mode 0x46 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x46 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x4 Setup chip a:w:u=4:2:4 ATI AtaSetTransferMode: Set 0x44 on Device 0/0 AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x44 feature 0x3 Status 0x50 Using 0x44 mode AtapiEnableInterrupts_0: 1 AtapiHwInitialize: lChannel 0x0, dev 1 AtapiHwInitialize: (base) done TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x439c1002/0x0 SRB 0xf7884f98, CDB 0xf7884fc8, AtaReq 0xb7420000, SCmd 0x12 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf7884f98 TopLevel (3), AtaReq 0xb7420000 Try ATAPI send 12 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: BuildMechanismStatusSrb() MechanismStatusSrb 0xb71fb044 AtapiSendCommand: AtapiSendCommand recursive AtapiSendCommand: req state 0x20, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb b71fb074) assume IN AtapiSendCommand: use_dma=0, Cmd bd AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0 AtapiDmaReinit: set PIO mode on Device 0 (44 -> c) AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x44 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0xffffffff Setup chip a:w:u=4:-1:-1 ATI AtaSetTransferMode: Set 0xc on Device 0/0 AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3 Status 0x50 AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b71fb074 Command 0xbd to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiSendCommand: cmd status (0xd0) AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiSendCommand: SRB_STATUS_PENDING (2) AtapiStartIo: next Srb f7884f98 AtapiStartntr: VendorID+DeviceID/Rev 0x439c1002/0x0 (ex 2) AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x24 ATI perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x51 base status 0x51 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x0:0, irql 0xd, c 0 dev_type ATAPI OldReqState = 42 continue service interrupt AtapiInterrupt: ATAPI Entered with status (0x51) AtapiInterrupt: iReason 3 AtapiInterrupt: Error 0x60 Bad Lba 0x0 wait 10 ready after ATAPI error Intr on DRQ 0 AtapiInterrupt: ATAPI Error, int reason 3 Errors in PIO mode AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: OriginalSrb != NULL AtapiInterrupt: SCSIOP_MECHANISM_STATUS status 0x4 RequestSenseSrb 0xb71fb044 AtapiSendCommand: req state 0x50, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b71fb074) assume IN AtapiSendCommand: SCSIOP_REQUEST_SENSE, no DMA setup AtapiSendCommand: : SCSIOP_REQUEST_SENSE -> no dma setup (2) AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0 AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0 AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b71fb074 Command 0x3 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x51 continue with SCSIOP_REQUEST_SENSE AtapiSendCommand: Entry Status (0x51) AtapiSendCommand: Poll for int. to send packet. Status (0x51) AtapiSendCommand: status (0x58) AtapiSendCommand: cmd status (0xd0) AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiInterrupAtapiInterrupt: send orig SRB_STATUS_PENDING (1) AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 Intr: VendorID+DeviceID/Rev 0x439c1002 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x4 ATI perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x58 base status 0x58 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x0:0, irql 0xd, c 0 dev_type ATAPI OldReqState = 42 continue service interrupt AtapiInte0x58) AtapiInterrupt: iReason 2 AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 2 AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: get R wordCount 0x9 IdeIntr: Read 0x9 words IdeIntr: PIO Read AtaReq->DataBuffer 0xb71fb02c, srb->DataBuffer 0xb71fb02c 70 00 06 00 00 00 00 0e 00 00 00 00 29 00 00 00 00 00 status re-check 0x50 AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0 AtapiInterrupt: early complete ? status 50 AtapiInterrupt: CompleteRequest, srbstatus 1 AtapiInterrupt: OriginalSrb != NULL AtapiInterrupt: ATAPI command status 0x1 AtapiInterrupt: MechStatusRetryCount 0x3 MechanismStatusSrb 0xb71fb044 AtapiSendCommand: req state 0x50, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb b71fb074) assume IN AtapiSendCommand: use_dma=0, Cmd bd AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0 AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b71fb074 Command 0xbd to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiSendCommand: cmd status (0xd0) AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiInterrupt: chan->ExpectingInterrupt 1 (2) AtapiInterrupt: send orig SRB_STATUS_PENDING (2) AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 Intr: VendorID+DeviceID/Rev 0x439c1002/0x0 (ex 1) AtapiInterrupt(nterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x4 ATI perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x58 base status 0x58 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x0:0, irql 0xd, c 0 dev_type ATAPI OldReqState = 42 continue service interrupt AtapiInterrupt: ATAPI Entered with status (0x58) AtapiInterrupt: iReason 2 AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 2 AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: get R wordCount 0x4 IdeIntr: Read 0x4 words IdeIntr: PIO Read AtaReq->DataBuffer 0xb71fb024, srb->DataBuffer 0xb71fb024 status re-check 0x50 AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0 AtapiInterrupt: early complete ? status 50 AtapiInterrupt: CompleteRequest, srbstatus 1 AtapiInterrupt: OriginalSrb != N_STATUS status 0x1 AtapiSendCompiSendCommand: prepare..., ATAPI CMD 12 (Cdb f7884fc8) assume IN AtapiSendCommand: use_dma=0, Cmd 12 AtapiSendCommand: AtapiDmaReinit() AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0 AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f7884fc8 Command 0x12 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 AtapiSendCommand: Entry Status (0x50) AtapiSendCommand: Poll for int. to send packet. Status (0x50) AtapiSendCommand: status (0x58) AtapiSendCommand: cmd status (0xd0) AtapiSendCommand: ExpectingInterrupt (0x1) AtapiSendCommand: return SRB_STATUS_PENDING (3) AtapiInterrupt: chan->ExpectingInterrupt 1 (1) AtapiInterrupt: send orig SRB_STATUS_PENDING (1) AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 Intr: VendorID+DeviceID/Rev 0x439c1002/0x0 (ex 1) AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x4 ATI perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... ATAPI status 0x58 base status 0x58 AtapiCheckInterrupt__: exit with TRUE AtapiInterrupt: cntrlr 0x0:0, irql 0xd, c 0 d continue service interrupt AtapiInterrupt: ATAPI Entered with status (0x58) AtapiInterrupt: iReason 2 AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 2 AtapiInterrupt: i-reason=2, status=0x58 AtapiInterrupt: get R wordCount 0x12 IdeIntr: Read 0x12 words IdeIntr: PIO Read AtaReq->DataBuffer 0xf7811208, srb->DataBuffer 0xf7811208 status re-check 0x50 AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0 AtapiInterrupt: early complete ? status 50 AtapiInterrupt: CompleteRequest, srbstatus 1 AtapiInterrupt: PIO completion AtapiInterrupt: PIO completion, wait BUSY IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf781122c, srb->DataBuffer 0xf7811208, len 0x24 Transfered 3e, full size 24 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xf7884f98, status 1 AtapiInterrupt: RequestComplete, srb 0xf7884f98 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt:exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 Intr: VendorID+DeviceID/Rev 0x439c1002/0x0 (ex 1) AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x4 ATI perform generic check clear unexpected DMA intr AtapiDmaDone: dev -1 getting status... IDE status 0x50 base status 0x50 Unexpected interrupt. OurInterrupt nexpected AtapiInterrupt(base): exit with status 0x1 Intr: VendorID+DeviceID/Rev 0x439c1002/0x0 (ex 0) unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE DMA status 0x0 ATI perform generic check getting status... IDE status 0x50 base status 0x50 Unexpected interrupt. OurInterrupt = 0 AtapiInterrupt(base): set CHECK_INTR_IDLE (2) AtapiInterrupt(base): exit with status 0x0 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x1:0x0 VendorID+DeviceID/Rev 0x439c1002/0x0 AtapiStartIo: SRB rejected SRB_STATUS_SELECf7884f98 complete with status 0xa AtapiStartIo: UniataRemoveRequest(0, f7884f98) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan 0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1 VendorID+DeviceID/Rev 0x439c1002/0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf7884f98 TopLevel (3), AtaReq 0xb7420000 HDD at home CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x0 HDD at home HDD at home CheckDevice: status 0x1 CheckDevice: IDE device check IssueIdentify: Checking for IDE. Status (0x0) IssueIDLE IssueIdentify: no dev (dev 1) CheckDevice: check status: not found AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf7884f98 complete with status 0xa AtapiStartIo: AtapiDmaDBSync(b71fb008, f7884f98) AtapiStartIo: UniataRemoveRequest(b71fb008, f7884f98) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71fb008, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x439c1002/0x0 AtapiStartIo: Communication port INQUIRY AtapiStartIo: Srb 0xf7884f98 complete with status 0x1 AtapiStartIo: UniataRemoveRequest(0, f7884f98) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan 0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x1:0x0 VendorID+DeviceID/Rev 0x439c1002/0x0 AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf7884f98 complete with status 0xa AtapiStartIo: UniataRemoveRequest(0, f7884f98) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan 0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query * AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x439c1002/0x0 AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf7884f98 complete with status 0xa AtapiStartIo: UniataRemoveRequest(0, f7884f98) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan 0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for ns 0x0 Parameter IgnoreIsaCompatiblePci Parameter IgnoreIsaCompatiblePci = 0x0 Try init channel 1, method 0 UniataFindBusMasterController: Context=0, BMListLen=4 ConfigInfo->Length 8c AdapterInterfaceType: Isa bm_offset 8, channel 1 AdapterInterfaceType=0x1 IoBusNumber=0x0 slotNumber=0x34 busDataRead DevId = 439C1002 Class = 0001/0001 Storage Class MasterDev (1) UniataChipDetect: HwFlags: 0x0 Parameter ForceSimplex Parameter ForceSimplex = 0x0 i: 0x15 VendorID/DeviceID/Rev 0x1002/0x439c/0x0 i: 0x8 HwFlags: 0x0 Parameter HwFlagsOverride Parameter HwFlagsOverride = 0x0 HwFlagsOverride: 0x0 Parameter Hw0x0 HwFlagsAdd: 0x0 HwFlags (final): 0x0 MaxTransferMode: 0x46 Parameter MaxTransferMode Parameter MaxTransferMode = 0x46 MaxTransferMode (overriden): 0x46 UniataChipDetectChannels: MasterDev -> 1 chan ATI IXP700 AtapiFindListedDev: lim=ffffffff, Bus=0, Slot=ffffffff scanning range Bus 0-0, Slot 0-1f AtapiFindListedDev: found AtapiFindListedDev: b:s:f(0:14:0) 1002/4385/3a SATA controller enabled (secondary channel) New ATI no 2nd PATA chan FAILED => SP_RETURN_ERROR ScsiPortInitialize Status 0xc00000e5 Ok, no more retries required !BMList[i].MasterDev ATAPI IDE: Look for PCI IDE controller ATAPI IDE: i 1, BMListLen 4 Parameter IgnoreNativePci Parameter IgnoreNativePci = 0x0 Try init 1002 4391 (hal/halx86/legacy/bussupp.c:1159) Slot assignment for 5 on bus 0 (hal/halx86/legacy/bus/pcibus.c:715) WARNING: PCI Slot Resource Assignment is FOOBAR UniataFindBusMasterController: Context=1, BMListLen=4 ConfigInfo->Length 8c bm_offset 0, channel 0 AdapterInterfaceType=0x5 IoBusNumber=0x0 slotNumber=0x11 busDataRead DevId = 43911002 Class = 0001/0006 Storage Cetect: HwFlags: 0x0 Parameter ForceSimplex Parameter ForceSimplex = 0x0 i: 0x15 VendorID: 0xa HwFlags: 0x12000000 Par HwFlagsOverride = 0x12000000 HwFlagsOverride: 0x12000000 Parameter HwFlagsAdd Parameter HwFlagsAdd = 0x0 HwFlagsAdd: 0x0 HwFlags (final): 0x12000000 MaxTransferMode: 0x48 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 ATA_xxx_ID check AHCI subclass UniataAhciDetect: Parameter IgnoreAhci Parameter IgnoreAhci = 0x0 AtapiGetIoRange: AtapiGetIoRange: rid 0x5, start 0xfe02f000, offs 0x0, len 0x10, mem 0x1 AtapiGetIoRange: 0xf7811000 MemIo AHCI Base: 0xf7811000 MemIo 1 Proc 0 AHCI_0x0 (0xf7811000) = 0xf722ff85 AHCI_0x4 (0xf7811004) = 0x80000002 AHCI_0x8 (0xf7811008) = 0x0 AHCI_0xc (0xf781100c) = 0x3f AHCI_0x10 (0xf7811010) = 0x10100 check AHCI mode, GHC 0x80000002 AHCI CAP 0xf722ff85, CAP2 0x0 64bit NCQ SNTF CCC AHCI PI 0x3f CommandSlots 31 Channels 6 AHCI version 0x1.10 controller with 6 ports (mask 0x3f) detected AHCI SATA Gen 2 PM supported Parameter IgnoreAhciPM Parameter IgnoreAhciPM = 0x1 SATA/AHCI w/o PM, max luns 1 AHCI detect status 1 allocate 1 Luns for 6 channels ATI ForceSimplex = 0 HwFlags = 12000000 (0)HwFlags = 12000000 (1)HwFlags = 12000000 (2)found suitable device HwFlags = 12000000 (3) AHCI registers layout AtapiReadChipConfig: devExt 0xb741f7f4 AtapiReadChipConfig: dev 0x1, ph chan -1 Parameter ForceSimplex Parameter ForceSimplex = 0x0 MaxTransferMode (base): 0x48 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 Parameter AtapiDmaZeroTransfer Parameter AtapiDmaZeroTransfer = 0x0 Parameter AtapiDmaControlCmd Parameter AtapiDmaControlCmd = 0x0 Parameter AtapiDmaRawRead Parameter AtapiDmaRawRead = 0x1 Parameter AtapiDmaReadWrite Parameter AtapiDmaReadWrite = 0x1 AtapiChipInit: dev 0x1, ph chan -2, c -1 HwFlags: 0x12000000 VendorID/DeviceID/Rev 0x1002/0x4391/0x0 UniataAhciInit: AHCI Base: 0xf7811000 MemIo 1 Proc 0 AHCI_0x0 (0xf7811000) = 0xf722ff85 AHCI_0x4 (0xf7811004) = 0x80000002 AHCI_0x8 (0xf7811008) = 0x0 AHCI_0xc (0xf781100c) = 0x3f AHCI_0x10 (0xf7811010) = 0x10100 get GHC disable intr, GHC 0x80000002 reset AHCI controller, GHC 0x80000000 AHCI GHC 0x0 re-enable AHCI mode, GHC 0x0 AHCI GHC 0x80000000 AHCI CAP 0xf722ff85 AHCI 64bit AHCI 31 CMD slots AHCI multi-block PIO AHCI PI 0x3f SATA Gen 2 chan 0, offs 0x100 AtapiSetupLunPtrs for channel 0 of 6, 1 luns Chan 0xb71d1000 Lun 0x0 Lun ptr 0xb741d000 AtaReq 0xb71d3000: cmd aligned b71d3080, d=20 ahci_cmd_ptr 0xb71d3080 AtapiDmaAlloc: AHCI AtapiDmaAlloc: CLP BASE b741b000 AtapiDmaAlloc: CLP BASE 1k-aligned b741b000 AtapiDmaAlloc: CLP Phys BASE a121000 UniataAhciResume: lChan 0 WriteChannelPort4 0 => ch0[14] AHCI CLB setup WriteChannelPort4 a121000 => ch0[0] WriteChannelPort4 0 => ch0[4] AHCI RCV FIS setup WriteChannelPort4 a121400 => ch0[8] WriteChannelPort4 0 => ch0[c] WriteChannelPort4 10000006 => ch0[18] UniataAhciStartFR: lChan 0 ReadChannelPort4 ch0[18] = 2006 CMD 0x2006 WriteChannelPort4 2016 => ch0[18] UniataAhciStart: lChan 0 ReadChannelPort4 ch0[10] = 0 WriteChannelPort4 0 => ch0[10] SError 0x80000, IS 0x0 ReadChannelPort4 ch0[18] = 6016 CMD 0x6016 WriteChannelPort4 6017 => ch0[18] AHCI port 0 Base: 0xf7811100 MemIo 1 Proc 0 AHCI0_0x0 (0xf7811100) = 0xa121000 AHCI0_0x4 (0xf7811104) = 0x0 AHCI0_0x8 (0xf7811108) = 0xa121400 AHCI0_0xc (0xf781110c) = 0x0 AHCI0_0x10 (0xf7811110) = 0x0 AHCI0_0x14 (0xf7811114) = 0x0 AHCI0_0x18 (0xf7811118) = 0xe017 AHCI0_0x1c (0xf781111c) = 0x0 AHCI0_0x20 (0xf7811120) = 0x7f AHCI0_0x24 (0xf7811124) = 0xffffffff AHCI0_0x28 (0xf7811128) = 0x0 AHCI0_0x2c (0xf781112c) = 0x0 AHCI0_0x30 (0xf7811130) = 0x80000 AHCI0_0x34 (0xf7811134) = 0x0 AHCI0_0x38 (0xf7811138) = 0x0 AHCI0_0x3c (0xf781113c) = 0x0 chan 1, offs 0x180 AtapiSetupLunPtrs for channel 1 of 6, 1 luns Chan 0xb71d1268 Lun 0x0 Lun ptr 0xb741d308 AtaReq 0xb71d4000: cmd aligned b71d4080, d=20 ahci_cmd_ptr 0xb71d4080 AtapiDmaAlloc: AHCI AtapiDmaAlloc: CLP BASE b71cf000 AtapiDmaAlloc: CLP BASE 1k-aligned b71cf000 AtapiDmaAlloc: CLP Phys BASE 9ed5000 UniataAhciResume: lChan 1 WriteChannelPort4 0 => ch1[14] AHCI CLB setup WriteChannelPort4 9ed5000 => ch1[0] WriteChannelPort4 WriteChannelPort4 9ed5400 => ch1[8] WriteChannelPort4 0 => ch1[c] WriteChannelPort4 10000006 => ch1[18] UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 2006 CMD 0x2006 WriteChannelPort4 2016 => ch1[18] UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x80000, IS 0x0 ReadChannelPort4 ch1[18] = 6016 CMD 0x6016 WriteChannelPort4 6017 => ch1[18] AHCI port 1 Base: 0xf7811180 MemIo 1 Proc 0 AHCI1_0x0 (0xf7811180) = 0x9ed5000 AHCI1_0x4 (0xf7811184) = 0x0 AHCI1_0x8 (0xf7811188) = 0x9ed5400 AHCI1_0xc (0xf781118c) = 0x0 AHCI1_0x10 (0xf7811190) = 0x0 AHCI1_0x14 (0xf7811194) = 0x0 AHCI1_0x18 (0xf7811198) = 0xe017 AHCI1_0x1c (0xf781119c) = 0x0 AHCI1_0x20 (0xf78111a0) = 0x7f AHCI1_0x24 (0xf78111a4) = 0xffffffff AHCI1_0x28 (0xf78111a8) = 0x0 AHCI1_0x2c (0xf78111ac) = 0x0 AHCI1_0x30 (0xf78111b0) = 0x80000 AHCI1_0x34 (0xf78111b4) = 0x0 AHCI1_0x38 (0xf78111b8) = 0x0 AHCI1_0x3c (0xf78111bc) = 0x0 chan 2, offs 0x200 AtapiSetupLunPtrs for channel 2 of 6, 1 luns Chan 0xb71d14d0 Lun 0x0 Lun ptr 0xb741d610 AtaReq 0xb71d5000: cmd aligned b71d5080, d=20 ahci_cmd_ptr 0xb71d5080 AtapiDmaAlloc: AHCI AtapiDmaAlloc: CLP BASE b7419000 AtapiDmaAlloc: CLP BASE 1k-aligned b7419000 AtapiDmaAlloc: CLP Phys BASE a11f000 UniataAhciResume: lChan 2 WriteChannelPort4 0 => ch2[14] AHCI CLB setup WriteChannelPort4 a11f000 => ch2[0] WriteChannelPort4 0 => ch2[4] AHCI RCV FIS setup WriteChannelPort4 a11f400 => ch2[8] WriteChannelPort4 0 => ch2[c] WriteChannelPort4 10000006 => ch2[18] UniataAhciStartFR: lChan 2 ReadChannelPort4 ch2[18] = 2006 CMD 0x2006 WriteChannelPort4 2016 => ch2[18] UniataAhciStart: lChan 2 ReadChannelPort4 ch2[10] = 0 WriteChannelPort4 0 => ch2[10] SError 0x80000, IS 0x0 ReadChannelPort4 ch2[18] = 6016 CMD 0x6016 WriteChannelPort4 6017 => ch2[18] AHCI port 2 Base: 0xf7811200 MemIo 1 Proc 0 AHCI2_0x0 (0xf7811200) = 0xa11f000 AHCI2_0x4 (0xf7811204) = 0x0 AHCI2_0x8 (0xf7811208) = 0xa11f400 AHCI2_0xc (0xf781120c) = 0x0 AHCI2_0x10 (0xf7811210) = 0x0 AHCI2_0x14 (0xf7811214) = 0x0 AHCI2_0x18 (0xf7811218) = 0xe017 AHCI2_0x1c (0xf781121c) = 0x0 AHCI2_0x20 (0xf7811220) = 0x7f AHCI2_0x24 (0xf7811224) = 0xffffffff AHCI2_2c (0xf781122c) = 0x0 AHCI2_0x30 (0xf7811230) = 0x80000 AHCI2_0x34 (0xf7811234) = 0x0 AHCI2_0x38 (0xf7811238) = 0x0 AHCI2_0x3c (0xf781123c) = 0x0 chan 3, offs 0x280 AtapiSetupLunPtrs for channel 3 of 6, 1 luns Chan 0xb71d1738 Lun 0x0 Lun ptr 0xb741d918 AtaReq 0xb71d6000: cmd aligned b71d6080, d=20 ahci_cmd_ptr 0xb71d6080 AtapiDmaAlloc: AHCI AtapiDmaAlloc: CLP BASE b71cd000 AtapiDmaAlloc: CLP BASE 1k-aligned b71cd000 AtapiDmaAlloc: CLP Phys BASE 9ed3000 UniataAhciResume: lChan 3 WriteChannelPort4 0 => ch3[14] AHCI CLB setup WriteChannelPort4 9ed3000 => ch3[0] WriteChannelPort4 0 => ch3[4] AHCI RCV FIS setup WriteChannelPort4 9ed3400 => ch3[8] WriteChannelPort4 0 => ch3[c] WriteChannelPort4 10000006 => ch3[18] UniataAhciStartFR: lChan 3 ReadChannelPort4 ch3[18] = 2006 CMD 0x2006 WriteChannelPort4 2016 => ch3[18] UniataAhciStart: lChan 3 ReadChannelPort4 ch3[10] => ch3[10] SError 0x40d0000, IS 0x400040 ReadChannelPort4 ch3[18] = 6016 CMD 0x6016 WriteChannelPort4 6017 => ch3[18] AHCI port 3 Base: 0xf7811280 MemIo 1 Proc 0 AHCI3_0x0 (0xf7811280) = 0x9ed3000 AHCI3_0x4 (0xf7811284) = 0x0 AHCI3_0x8 (0xf7811288) = 0x9ed3400 AHCI3_0xc (0xf781128c) = 0x0 AHCI3_0x10 (0xf7811290) = 0x400040 AHCI3_0x14 (0xf7811294) = 0x0 AHCI3_0x18 (0xf7811298) = 0xe017 AHCI3_0x1c (0xf781129c) = 0x0 AHCI3_0x20 (0xf78112a0) = 0x150 AHCI3_0x24 (0xf78112a4) = 0x101 AHCI3_0x28 (0xf78112a8) = 0x123 AHCI3_0x2c (0xf78112ac) = 0x0 AHCI3_0x30 (0xf78112b0) = 0x40d0000 AHCI3_0x34 (0xf78112b4) = 0x0 AHCI3_0x38 (0xf78112b8) = 0x0 AHCI3_0x3c (0xf78112bc) = 0x0 chan 4, offs 0x300 AtapiSetupLunPtrs for channel 4 of 6, 1 luns Chan 0xb71d19a0 Lun 0x0 Lun ptr 0xb741dc20 AtaReq 0xb71d7000: cmd aligned b71d7080, d=20 ahci_cmd_ptr 0xb71d7080oc: CLP BASE b7417000 AtapiDmaAlloc: CLP BASE 1k-aligned b7417000 AtapiDmaAlloc: CLP Phys BASE a11d000 UniataAhciResume: lChan 4 WriteChannelPort4 0 => ch4[14] AHCI CLB setup WriteChannelPort4 a11d000 => ch4[0] WriteChannelPort4 0 => ch4[4] AHCI RCV FIS setup WriteChannelPorPort4 0 => ch4[c] WriteChannelPort4 10000006 => ch4[18] UniataAhciStartFR: lChan 4 ReadChannelPort4 ch4[18] = 2006 CMD 0x2006 WriteChannelPort4 2016 => ch4[18] UniataAhciStart: lChan 4 ReadChannelPort4 ch4[10] = 0 WriteChannelPort4 0 => ch4[10] SError 0x80000, IS 0x0 ReadChannelPort4 ch4[18] = 6016 CMD 0x6016 WriteChannelPort4 6017 => ch4[18] AHCI port 4 Base: 0xf7811300 MemIo 1 Proc 0 AHCI4_0x0 (0xf7811300) = 0xa11d000 AHCI4_0x4 (0xf7811304) = 0x0 AHCI4_0x8 (0xf7811308) = 0xa11d400 AHCI4_0xc (0xf781130c) = 0x0 AHCI4_0x10 (0xf7811310) = 0x0 AHCI4_0x14 (0xf7811314) = 0x0 AHCI4_0x18 (0xf7811318) = 0xe017 AHCI4_0x1c (0xf781131c) = 0x0 AHCI4_0x20 (0xf7811320) = 0x7f AHCI4_0x24 (0xf7811324) = 0xffffffff AHCI4_0x28 (0xf7811328) = 0x0 AHCI4_0x2c (0xf781132c) = 0x0 AHCI4_0x30 (0xf7811330) = 0x80000 AHCI4_0x34 (0xf7811334) = 0x0 AHCI4_0x38 (0xf7811338) = 0x0 AHCI4_0x3c (0xf781133c) = 0x0 chan 5, offs 0x380 AtapiSetupLunPtrs for channel 5 of 6, 1 luns Chan 0xb71d1c08 Lun 0x0 Lun ptr 0xb741df28 AtaReq 0xb71d8000: cmd aligned b71d8080, d=20 ahci_cmd_ptr 0xb71d8080 AtapiDmaAlloc: AHCI AtapiDmaAlloc: CLP BASE b71cb000 AtapiDmaAlloc: CLP BASE 1k-aligned b71cb000 AtapiDmaAlloc: CLP Phys BASE 9ed1000 UniataAhciResume: lChan 5 WriteChannelPort4 0 => ch5[14] AHCI CLB setup WriteChannelPort4 9ed1000 => ch5[0] WriteChannelPort4 0 => ch5[lPort4 9ed1400 => ch5[8] WriteChannelPort4 0 => ch5[c] WriteChannelPort4 10000006 => ch5[18] UniataAhciStartFR: lChan 5 ReadChannelPort4 ch5[18] = 2006 CMD 0x2006 WriteChannelPort4 2016 => ch5[18] UniataAhciStart: lChan 5 ReadChannelPort4 ch5[10] = 0 WriteChannelPort4 0 => ch5[10] SError 0x80000, IS 0x0 ReadChannelPort4 ch5[18] = 6016 CMD 0x6016 WriteChannelPort4 6017 => ch5[18] AHCI port 5 Base: 0xf7811380 MemIo 1 Proc 0 AHCI5_0x0 (0xf7811380) = 0x9ed1000 AHCI5_0x4 (0xf7811384) = 0x0 AHCI5_0x8 (0xf7811388) = 0x9ed1400 AHCI5_0xc (0xf781138c) = 0x0 AHCI5_0x10 (0xf7811390) = 0x0 AHCI5_0x14 (0xf7811394) = 0x0 AHCI5_0x18 (0xf7811398) = 0xe017 AHCI5_0x1c (0xf781139c) = 0x0 AHCI5_0x20 (0xf78113a0) = 0x7f AHCI5_0x24 (0xf78113a4) = 0xffffffff AHCI5_0x28 (0xf78113a8) = 0x0 AHCI5_0x2c (0xf78113ac) = 0x0 AHCI5_0x30 (0xf78113b0) = 0x80000 AHCI5_0x34 (0xf78113b4) = 0x0 AHCI5_0x38 (0xf78113b8) = 0x0 AHCI5_0x3c (0xf78113bc) = 0x0 simplexOnly = 0 (2)!MasterDev update ConfigInfo->nt4 using AtaReq sz 1000 update ConfigInfo->w2k: 64bit 1 chan[0] InterruptMode: 0, Level 10, Level2 0, Vector 10, Vector2 0 Reconstruct ConfigInfo set Dma32BitAddresses BMList[i].channel 0x0, NumberChannels 0x6, channel 0x0 de 0xb741f7f4, Channel 0x0 chan = 0xb71d1000 AtapiSetupLunPtrs for channel 0 of 6, 1 luns Chan 0xb71d1000 Lun 0x0 Lun ptr 0xb741d000 AtaReq 0xb71d3000: cmd aligned b71d3080, d=20 ahci_cmd_ptr 0xb71d3080 AtapiReadChipConfig: devExt 0xb741f7f4 AtapiReadChipConfig: dev 0x1, ph chan 0 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 Parameter ReorderEnable Parameter ReorderEnable = 0x1 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 No more setup for AHCI channel IDX_IO1 0->0(io) IDX_IO2 10->f7811120(mem) IDX_BM_IO 14->0(io) IDX_SATA_IO 19->f7811128(mem) AtapiDmaAlloc: AHCI already initialized b741b000 de 0xb741f7f4, Channel 0x1 chan = 0xb71d1268 AtapiSetupLunPtrs for channel 1 of 6, 1 luns Chan 0xb71d1268 Lun 0x0 Lun ptr 0xb741d308 AtaReq 0xb71d4000: cmd aligned b71d4080, d=20 ahci_cmd_ptr 0xb71d4080 AtapiReadpiReadChipConfig: dev 0x1, ph chan 1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 Parameter ReorderEnable Parameter ReorderEnable = 0x1 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 No more setup for AHCI channel IDX_IO1 0->0(io) IDX_IO2 10->f78111a0(mem) IDX_BM_IO 14->0(io) IDX_SATA_IO 19->f78111a8(mem) AtapiDmaAlloc: AHCI already initialized b71cf000 de 0xb741f7f4, Channel 0x2 chan = 0xb71d14d0 AtapiSetupLunPtrs for channel 2 of 6, 1 luns Chan 0xb71d14d0 Lun 0x0 Lun ptr 0xb741d610 1d5080, d=20 ahci_cmd_ptr 0xb71d5080 AtapiReadChipConfig: devExt 0xb741f7f4 AtapiReadChipConfig: dev 0x1, ph chan 2 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 Parameter ReorderEnable Parameter ReorderEnable = 0x1 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 No more setup for AHCI channel IDX_IO1 0->0(io) IDX_IO2 10->f7811220(mem) IDX_BM_IO 14->0(io) IDX_SATA_IO 19->f7811228(mem) AtapiDmaAlloc: AHCI already initialized b7419000 de 0xb741f7f4, Channel 0x3 chan = 0xb71d1738 AtapiSetupLunPtrs for channel 3 of 6, 1 luns Chan 0xb71d1738 Lun 0x0 Lun ptr 0xb741d918 AtaReq 0xb71d6000: cmd aligned b71d6080, d=20 ahci_cmd_ptr 0xb71d6080 AtapiReadChipConfig: devExt 0xb741f7f4 AtapiReadChipConfig: dev 0x1, ph chan 3 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 Parameter ReorderEnable Parameter ReorderEnable = 0x1 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 No more setup for AHCI channel IDX_IO1 0->0(io) IDX_IO2 10->f78112a0(mem) IDX_BM_IO 14->0(io) IDX_SATA_IO 19->f78112a8(mem) AtapiDmaAlloc: AHCI already initialized b71cd000 de 0xb741f7f4, Channel 0x4 chan = 0xb71d19a0 AtapiSetupLunPtrs for channel 4 of 6, 1 luns Chan 0xb71d19a0 Lun 0x0 Lun ptr 0xb741dc20 AtaReq 0xb71d7000: cmd aligned b71d7080, d=20 ahci_cmd_ptr 0xb71d7080 AtapiReadChipConfig: devExt 0xb741f7f4 AtapiReadChipConfig: dev 0x1, ph chan 4 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 Parameter ReorderEnable Parameter ReorderEnable = 0x1 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 No more s0(io) IDX_IO2 10->f7811320(mem) IDX_BM_IO 14->0(io) IDX_SATA_IO 19->f7811328(mem) AtapiDmaAlloc: AHCI already initialized b7417000 de 0xb741f7f4, Channel 0x5 chan = 0xb71d1c08 AtapiSetupLunPtrs for channel 5 of 6, 1 luns Chan 0xb71d1c08 Lun 0x0 Lun ptr 0xb741df28 AtaReq 0xb71d8000: cmd aligned b71d8080, d=20 ahci_cmd_ptr 0xb71d8080 AtapiReadChipConfig: devExt 0xb741f7f4 AtapiReadChipConfig: dev 0x1, ph chan 5 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 Parameter ReorderEnable Parameter ReorderEnable = 0x1 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Pter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 No more setup for AHCI channel IDX_IO1 0->0(io) IDX_IO2 10->f78113a0(mem) IDX_BM_IO 14->0(io) IDX_SATA_IO 19->f78113a8(mem) AtapiDmaAlloc: AHCI already initialized b71cb000 exit: init spinlock MasterDev=0x0, NumberChannels=0x6, Isr2DevObj=0x0 Init ISR: Multichannel native mode, go... Create DO DO name: len(38, 38), \Device\uniata1_2ch HalGetInterruptVector OrigAdapterInterfaceType=5 SystemIoBusNumber=0 BusInterruptLevel=10 BusInterruptVector=10 isr2_de 0xb71fc250 isr2_vector 0x3a isr2_irql 0x11 isr2_affinity 0x1 IoConnectInterrupt MasterDev=0x0, NumberChannels=0x6, Isr2DevObj=0xb71fc198 final chan[6] InterruptMode: 0, Level 10, Level2 0, Vector 10, Vector2 0 return SP_RETURN_FOUND AtapiHwInitialize: (base) AtapiChipInit: dev 0xffffffff, ph chan -1, c -1 HwFlags: 0x12000000 VendorID/DeviceID/Rev 0x1002/0x4391/0x0 UniataAhciInit: AHCI Base: 0xf7811000 MemIo 1 Proc 0f85 AHCI_0x4 (0xf7811004) = 0x80000002 AHCI_0x8 (0xf7811008) = 0x0 AHCI_0xc (0xf781100c) = 0x3f AHCI_0x10 (0xf7811010) = 0x10100 get GHC disable intr, GHC 0x80000002 reset AHCI controller, GHC 0x80000000 AHCI GHC 0x0 re-enable AHCI mode, GHC 0x0 AHCI GHC 0x80000000 AHCI CAP 0xf722ff85 AHCI 64bit AHCI 31 CMD slots AHCI multi-block PIO AHCI PI 0x3f SATA Gen 2 chan 0, offs 0x100 AtapiSetupLunPtrs for channel 0 of 6, 1 luns Chan 0xb71d1000 Lun 0x0 Lun ptr 0xb741d000 AtaReq 0xb71d3000: cmd aligned b71d3080, d=20 ahci_cmd_ptr 0xb71d3080 AtapiDmaAlloc: AHCI already initialized b741b000 UniataAhciResume: lChan 0 WriteChannelPort4 0 => ch0[14] AHCI CLB setup WriteChannelPort4 a121000 => ch0[0] WriteChannelPort4 0 => ch0[4] AHCI RCV FIS setup WriteChannelPort4 a121400 => ch0[8] WriteChannelPort4 0 => ch0[c] WriteChannelPort4 10000006 => ch0[18] UniataAhciStartFR: lChan 0 ReadChannelPort4 ch0[18] = 2006 CMD 0x2006 WriteChannelPort4 2016 => ch0[18] UniataAhciStart: lChan 0 ReadChannelPort4 ch0[10] = 0 WriteChannelPort4 0 => ch0[10] SError 0x80000, IS 0x0 ReadChannelPort4 ch0[18] = 6016 CMD 0x6016 WriteChannelPort4 6017 => ch0[18] AHCI port 0 Base: 0xf7811100 MemIo 1 Proc 0 AHCI0_0x0 (0xf7811100) = 0xa121000 AHCI0_0x4 (0xf7811104) = 0x0 AHCI0_0x8 (0xf7811108) = 0xa121400 AHCI0_0xc (0xf781110c) = 0x0 AHCI0_0x10 (0xf7811110) = 0x0 AHCI0_0x14 (0xf7811114) = 0x0 AHCI0_0x18 (0xf7811118) = 0xe017 AHCI0_0x1c (0xf781111c) = 0x0 AHCI0_0x20 (0xf7811120) = 0x7f AHCI0_0x24 (0xf7811124) = 0xffffffff AHCI0_0x28 (0xf7811128) = 0x0 AHCI0_0x2c (0xf781112c) = 0x0 AHCI0_0x30 (0xf7811130) = 0x80000 AHCI0_0x34 (0xf7811134) = 0x0 AHCI0_0x38 (0xf7811138) = 0x0 AHCI0_0x3c (0xf781113c) = 0x0 chan 1, offs 0x180 AtapiSetupLunPtrs for channel 1 of 6, 1 luns Chan 0xb71d1268 Lun 0x0 Lun ptr 0xb741d308 AtaReq 0xb71d4000: cmd aligned b71d4080, d=20 ahci_cmd_ptr 0xb71d4080 AtapiDmaAlloc: AHCI already initialized b71cf000 UniataAhciResume: lChan 1 WriteChannelPort4 0 => ch1[14] AHCI CLB setup WriteChannelPort4 9ed5000 => ch1[0] WriteChannelPort4 0 => ch1[4] AHCI RCV FIS setup WriteChannelPort4 9ed5400 => ch1[8] WriteChannelPort4 0 => ch1[c] WriteChannelPort4 10000006 => ch1[18] UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 2006 CMD 0x2006 WriteChannelPort4 2016 => ch1[18] UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x80000, IS 0x0 ReadChannelPort4 ch1[18] = 6016 CMD 0x6016 WriteChannelPort4 6017 => ch1[18] AHCI port 1 Base: 0xf7811180 MemIo 1 Proc 0 AHCI1_0x0 (0xf7811180) = 0x9ed5000 AHCI1_0x4 (0xf7811184) = 0x0 AHCI1_0x8 (0xf7811188) = 0x9ed5400 AHCI1_0xc (0xf781118c) = 0x0 AHCI1_0x10 (0xf7811190) = 0x0 AHCI1_0x14 (0xf7811194) = 0x0 AHCI1_0x18 (0xf7811198) = 0xe017 AHCI1_0x1c (0xf781119c) = 0x0 AHCI1_0x20 (0xf78111a0) = 0x7f AHCI1_0x24 (0xf78111a4) = 0xffffffff AHC_0x2c (0xf78111ac) = 0x0 AHCI1_0x30 (0xf78111b0) = 0x80000 AHCI1_0x34 (0xf78111b4) = 0x0 AHCI1_0x38 (0xf78111b8) = 0x0 AHCI1_0x3c (0xf78111bc) = 0x0 chan 2, offs 0x200 AtapiSetupLunPtrs for channel 2 of 6, 1 luns Chan 0xb71d14d0 Lun 0x0 Lun ptr 0xb741d610 AtaReq 0xb71d5000: cmd aligned b71d5080, d=20 ahci_cmd_ptr 0xb71d5080 AtapiDmaAlloc: AHCI already initialized b7419000 UniataAhciResume: lChan 2 WriteChannelPort4 0 => ch2[14] AHCI CLB setup WriteChannelPort4 a11f000 => ch2[0] WriteChannelPort4 0 => ch2[4] AHCI RCV FIS setup WriteChannelPort4 a11f400 => ch2[8] WriteChannelPort4 0 => ch2[c] WriteChannelPort4 10000006 => ch2[18] UniataAhciStartFR: lChan 2 ReadChannelPort4 ch2[18] = 2006 CMD 0x2006 WriteChannelPort4 2016 => ch2[18] UniataAhciStart: lChan 2 ReadChannelPort4 ch2[10] = 0 WriteChannelPort4 0 => ch2[10] SError 0x80000, IS 0x0 ReadChannelPort4 ch2[18] = 6016 CMD 0x6016 WriteChannelPort4 6017 => ch2[18] AHCI port 2 Base: 0xf7811200 MemIo 1 Proc 0 AHCI2_0x0 (0xf7811200) = 0xa11f000 AHCI2_0x4 (0xf7811204) = 0x0 AHCI2_0x8 (0xf7811208) = 0xa11f400 AHCI2_0xc (0xf781120c) = 0x0 AHCI2_0x10 (0xf7811210) = 0x0 AHCI2_0x14 (0xf7811214) = 0x0 AHCI2_0x18 (0xf7811218) = 0xe017 AHCI2_0x1c (0xf781121c) = 0x0 AHCI2_0x20 (0xf7811220) = 0x7f AHCI2_0x24 (0xf7811224) 8) = 0x0 AHCI2_0x2c (0xf781122c) = 0x0 AHCI2_0x30 (0xf7811230) = 0x80000 AHCI2_0x34 (0xf7811234) = 0x0 AHCI2_0x38 (0xf7811238) = 0x0 AHCI2_0x3c (0xf781123c) = 0x0 chan 3, offs 0x280 AtapiSetupLunPtrs for channel 3 of 6, 1 luns Chan 0xb71d1738 Lun 0x0 Lun ptr 0xb741d918 AtaReq 0xb71d6000: cmd aligned b71d6080, d=20 ahci_cmd_ptr 0xb71d6080 AtapiDmaAlloc: AHCI already initialized b71cd000 UniataAhciResume: lChan 3 WriteChannelPort4 0 => ch3[14] AHCI CLB setup WriteChannelPort4 9ed3000 => ch3[0] WriteChannelPort4 0 => ch3[4] AHCI RCV FIS setup WriteChannelPort4 9ed3400 => ch3[8] WriteChort4 10000006 => ch3[18] UniataAhciStartFR: lChan 3 ReadChannelPort4 ch3[18] = 2006 CMD 0x2006 WriteChannelPort4 2016 => ch3[18] UniataAhciStart: lChan 3 ReadChannelPort4 ch3[10] = 400040 WriteChannelPort4 400040 => ch3[10] SError 0x40d0000, IS 0x400040 ReadChannelPort4 ch3[18] = 6016 CMD 0x6016 WriteChannelPort4 6017 => ch3[18] AHCI port 3 Base: 0xf7811280 MemIo 1 Proc 0 AHCI3_0x0 (0xf7811280) = 0x9ed3000 AHCI3_0x4 (0xf7811284) = 0x0 AHCI3_0x8 (0xf7811288) = 0x9ed3400 AHCI3_0xc (0xf781128c) = 0x0 AHCI3_0x10 (0xf7811290) = 0x400040 AHCI3_0x14 (0xf7811294) = 0x0 AHCI3_0x18 (0xf7811298) = 0xe017 AHCI3_0x1c (0xf781129c) = 0x0 AHCI3_0x20 (0xf78112a0) = 0x150 AHCI3_0x24 (0xf78112a4) = 0x101 AHCI3_0x28 (0xf78112a8) = 0x123 AHCI3_0x2c (0xf78112ac) = 0x0 AHCI3_0x30 (0xf78112b0) = 0x40d0000 AHCI3_0x34 (0xf78112b4) = 0x0 AHCI3_0x38 (0xf78112b8) = 0x0 AHCI3_0x3c (0xf78112bc) = 0x0 chan 4, offs 0x300 AtapiSetupLunPtrs for channel 4 of 6, 1 luns Chan 0xb71d19a0 Lun 0x0 Lun ptr 0xb741dc20 AtaReq 0xb71d7000: cmd aligned b71d7080, d=20 ahci_cmd_ptr 0xb71d7080 AtapiDmaAlloc: AHCI already initialized b7417000 UniataAhciResume: lChan 4 WriteChannelPort4 0 => ch4[14] AHCI CLB setup WriteChannelPort4 a11d000 => ch4[0] WriteChannelPort4 0 => ch4[4] AHCI RCV FIS setup WriteChannelPort4 a11d400 => ch4[8] WriteChannelPort4 0 => ch4[c] WriteChannelPort4 10000006 => ch4[18] UniataAhciStartFR: lChan 4 ReadChannelPort4 ch4[18] = 2006 CMD 0x2006 WriteChannelPort4 2016 => ch4[18] UniataAhciStart: lChan 4 ReadChannelPort4 ch4[10] = 0 WriteChannelPort4 0 => ch4[10] SError 0x80000, IS 0x0 ReadChannelPort4 ch4[18] = 6016 CMD 0x6016 WriteChannelPort4 6017 => ch4[18] AHCI port 4 Base: 0xf7811300 MemIo 1 Proc 0 AHCI4_0x0 (0xf7811300) = 0xa11d000 AHCI4_0x4 (0xf7811304) = 0x0 AHCI4_0x8 (0xf7811308) = 0xa11d400 AHCI4_0xc (0xf781130c) = 0x0 AHCI4_0x10 (0xf7811310) = 0x0 AHCI4_0x14 (0xf7811314) = 0x0 AHCI4_0x18 (0xf7811318) = 0xe017 AHCI4_0x1c (0xf781131c) = 0x0 AHCI4_0x20 (0xf7811320) = 0x7f AHCI4_0x24 (0xf7811324) = 0xffffffff AHCI4_0x28 (0xf7811328) = 0x0 AHCI4_0x2c (0xf781132c) = 0x0 AHCI4_0x30 (0xf7811330) = 0x80000 AHCI4_0x34 (0xf7811334) = 0x0 AHCI4_0x38 (0xf7811338) = 0x0 AHCI4_0x3c (0xf781133c) = 0x0 chan 5, offs 0x380 AtapiSetupLunPtrs for channel 5 of 6, 1 luns Chan 0xb71d1c08 Lun 0x0 Lun ptr 0xb741df28 AtaReq 0xb71d8000: cmd aligned b71d8080, d=20 ahci_cmd_ptr 0xb71d8080 AtapiDmaAlloc: AHCI already initialized b71cb000 UniataAhciResume: lCha AHCI CLB setup WriteChannelPolPort4 0 => ch5[4] AHCI RCV F0 => ch5[8] WriteChannelPort4 0 => ch5[c] WriteChannelPort4 10000006 => ch5[18] UniataAhciStartFR: lChan 5 ReadChannelPort4 ch5[18] = 2006 CMD 0x2006 WriteChannelPort4 2016 => ch5[18] UniataAhciStart: lChan 5 ReadChannelPort4 ch5[10] = 0 WriteChannelPort4 0 => ch5[10] SError 0x80000, IS 0x0 ReadChannelPort4 ch5[18] = 6016 CMD 0x6016 WriteChannelPort4 6017 => ch5[18] AHCI port 5 Base: 0xf7811380 MemIo 1 Proc 0 AHCI5_0x0 (0xf7811380) = 0x9ed1000 AHCI5_0x4 (0xf7811384) = 0x0 AHCI5_0x8 (0xf7811388) = 0x9ed1400 AHCI5_0xc (0xf781138c) = 0x0 AHCI5_0x10 (0xf7811390) = 0x0 AHCI5_0x14 (0xf7811394) = 0x0 AHCI5_0x18 (0xf7811398) = 0xe017 AHCI5_0x1c (0xf781139c) = 0x0 AHCI5_0x20 (0xf78113a0) = 0x7f AHCI5_0x24 (0xf78113a4) = 0xffffffff AHCI5_0x28 (0xf78113a8) = 0x0 AHCI5_0x2c (0xf78113ac) = 0x0 AHCI5_0x30 (0xf78113b0) = 0x80000 AHCI5_0x34 (0xf78113b4) = 0x0 AHCI5_0x38 (0xf78113b8) = 0x0 AHCI5_0x3c (0xf78113bc) = 0x0 AtapiChipInit: dev 0xffffffff, ph chan 0, c 0 HwFlags: 0x12000000 VendorID/DeviceID/Rev 0x1002/0x4391/0x0 AHCI single channel init UniataAhciReset: lChan 0 WriteChannelPort4 0 => ch0[14] UniataAhciHardReset: lChan 0 UniataAhciStop: lChan 0 ReadChannelPort4 ch0[18] = e017 WriteChannelPort4 e016 => ch0[18] ReadChannelPort4 ch0[18] = 6016 final CMD 0x6016 UniataSataPhyEnable: SControl 0x0 UniataSataPhyEnable: retry init 0 SControl 00000001 UniataSataPhyEnable: retry idle 0 SControl 00000300 UniataSataConnect: UniataSataConnect: SStatus 00000000 no PHY No devices in all LUNs WriteChannelPort4 80400040 => ch0[14] FindDevices: AtapiDisableInterrupts_0: 0 WriteChannelPort4 0 => ch0[14] max_ldev 1 CheckDevice: Device 0x0 SStatus 0 SATA DET <= SStatus_DET_Dev_NoPhy AtapiEnableInterrupts_0: 1 WriteChannelPort4 fd4000ff => ch0[14] FindDevices: returning 0 (AHCI) AtapiHwInitialize: lChannel 0x0, dev 0 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x12000000 VendorID/DeviceID/Rev 0x1002/0x4391/0x0 AHCI single channel init UniataAhciReset: lChan 1 WriteChannelPort4 0 => ch1[14] UniataAhciHardReset: lChan 1 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = e017 WriteChannelPort4 e016 => ch1[18] ReadChannelPort4 ch1[18] = 6016 final CMD 0x6016 UniataSataPhyEnable: SControl 0x0 UniataSataPhyEnable: retry init 0 SControl 00000001 UniataSataPhyEnable: retry idle 0 SControl 00000300 UniataSataConnect: UniataSataConnect: SStatus 00000000 no PHY No devices in all LUNs WriteChannelPort4 80400040 => ch1[14] FindDevices: AtapiDisableInterrupts_1: 0 WriteChannelPort4 0 => ch1[14] max_ldev 1 CheckDevice: Device 0x0 SStatus 0 SATA DET <= SStatus_DET_Dev_NoPhy AtapiEnableInterrupts_1: 1 WriteChannelPort4 fd4000ff => ch1[14] FindDevices: returning 0 (AHCI) AtapiHwInitialize: lChannel 0x1, dev 0 AtapiChipInit: dev 0xffffffff, ph chan 2, c 2 HwFlags: 0x12000000 VendorID/DeviceID/Rev 0x1002/0x4391/0x0 AHCI single channel init UniataAhciReset: lChan 2 WriteChannelPort4 0 => ch2[14] UniataAhciHardReset: lChan 2 UniataAhciStop: lChan 2 ReadChannelPort4 ch2[18] = e017 WriteChannelPort4 e016 => ch2[18] ReadChannelPort4 ch2[18] = 6016 final CMD 0x6016 UniataSataPhyEnable: SControl 0x0 UniataSataPhyEnable: retry init 0 SControl 00000001 UniataSataPhyEnable: retry idle 0 SControl 00000300 UniataSataConnect: UniataSataConnect: SStatus 00000000 no PHY No devices in all LUNs WriteChannelPort4 80400040 => ch2[14] FindDevices: AtapiDisableInterrupts_2: 0 WriteChannelPort4 0 => ch2[14] max_ldev 1 CheckDevice: Device 0x0 SStatus 0 SATA DET <= SStatus_DET_Dev_NoPhy AtapiEnableInterrupts_2: 1 WriteChannelPort4 fd4000ff => ch2[14] FindDeviceslize: lChannel 0x2, dev 0 AtapiChipInit: dev 0xffffffff, ph chan 3, c 3 HwFlags: 0x12000000 VendorID/DeviceID/Rev 0x1002/0x4391/0x0 AHCI single channel init UniataAhciReset: lChan 3 WriteChannelPort4 0 han 3 UniataAhciStop: lChan 3 ReadChannelPort4 ch3[18] = e017 WriteChannelPort4 e016 => ch3[18] ReadChannelPort4 ch3[18] = 6016 final CMD 0x6016 UniataSataPhyEnable: SControl 0x0 UniataSataPhyEnable: retry init 0 SControl 00000001 UniataSataPhyEnable: retry idle 0 SControl 00000300 UniataSataConnect: SATA TransferMode 0x48 UniataSataConnect: OK, ATA status 0x50 UniataAhciWaitReady: lChan 3 ReadChannelPort4 ch3[20] = 150 TFD 0x150 TFD 0x150 AHCI port 3 Base: 0xf7811280 MemIo 1 Proc 0 AHCI3_0x0 (0xf7811280) = 0x9ed3000 AHCI3_0x4 (0xf7811284) = 0x0 AHCI3_0x8 (0xf7811288) = 0x9ed3400 AHCI3_0xc (0xf781128c) = 0x0 AHCI3_0x10 (0xf7811290) = 0x0 AHCI3_0x14 (0xf7811294) = 0x0 AHCI3_0x18 (0xf7811298) = 0x6016 AHCI3_0x1c (0xf781129c) = 0x0 AHCI3_0x20 (0xf78112a0) = 0x150 AHCI3_0x24 (0xf78112a4) = 0x101 AHCI3_0x28 (0xf78112a8) = 0x123 AHCI3_0x2c (0xf78112ac) = 0x300 AHCI3_0x30 (0xf78112b0) = 0x0 AHCI3_0x34 (0xf78112b4) = 0x0 AHCI3_0x38 (0xf78112b8) = 0x0 AHCI3_0x3c (0xf78112bc) = 0x0 ReadChannelPort4 ch3[24] = 101 sig: 0x101 UniataAhciStart: lChan 3 ReadChannelPort4 ch3[10] = 0 WriteChannelPort4 0 => ch3[10] SError 0x0, IS 0x0 ReadChannelPort4 ch3[18] = 6016 CMD 0x6016 WriteChannelPort4 6017 => ch3[18] WriteChannelPort4 f900003f => ch3[14] check PM UniataAhciSoftReset: lChan 3 UniataAhciStop: lChan 3 ReadChannelPort4 ch3[18] = e017 WriteChannelPort4 e016 => ch3[18] ReadChannelPort4 ch3[18] = 6016 final CMD 0x6016 UniataAhciStopFR: lChan 3 ReadChannelPort4 ch3[18] = 6016 CMD 0x6016 WriteChannelPort4 6006 => ch3[18] ReadChannelPort4 ch3[18] = 2006 final CMD 0x2006 UniataAhciCLO: lChan 3 send CLO ReadChannelPort4 ch3[18] = 2006 WriteChannelPort4 200e => ch3[18] ReadChannelPort4 ch3[18] = 2006 final CMD 0x2006 UniataAhciStartFR: lChan 3 ReadChannelPort4 ch3[18] = 2006 CMD 0x2006 WriteChannelPart: lChan 3 ReadChannelPort4 ch3[10] = 0 WriteChannelPort4 0 => ch3[10] SError 0x0, IS 0x0 ReadChannelPort4 ch3[18] = 6016 CMD 0x6016 WriteChannelPort4 6017 => ch3[18] UniataAhciSendCommand: lChan 3 WriteChannelPort4 1 => ch3[38] ReadChannelPort4 ch3[38] = 1 ReadChannelPort4 ch3[10] = 0 ReadChannelPort4 ch3[38] = 0 CI 0x0 ReadChannelPort4 ch3[10] = 0 IS 0x0 WriteChannelPort4 0 => ch3[10] UniataAhciSendCommand: lChan 3 WriteChannelPort4 1 => ch3[38] ReadChannelPort4 ch3[38] = 1 ReadChannelPort4 ch3[10] = 800000 CI 0x1 ReadChannelPort4 ch3[10] = 800000 IS 0x800000 WriteChannelPort4 800000 => ch3[10] UniataAhciWaitReady: lChan 3 ReadChannelPort4 ch3[20] = 1d0 ReadChannelPort4 ch3[20] = 1d0 TFD 0x1d0 34 00 50 01 01 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 signature 0x101 ATA dev FindDevices: AtapiDisableInterrupts_3: 0 WriteChannelPort4 0 => ch3[14] max_ldev 1 CheckDevice: Device 0x0 SStatus 123 AHCI check ReadChannelPort4 ch3[24] = ffffffff AHCI HDD at home CheckDevice: reset AHCI dev UniataAhciSoftReset: lChan 3 UniataAhciStop: lChan 3 ReadChannelPort4 ch3[18] = e017 WriteChannelPort4 e016 => ch3[18] ReadChannelPort4 ch3[18] = 6016 final CMD 0x6016 UniataAhciStopFR: lChan 3 ReadChannelPort4 ch3[18] = 6016 CMD 0x6016 WriteChannelPort4 6006 => ch3[18] ReadChannelPort4 ch3[18] = 2006 final CMD 0x2006ReadChannelPort4 ch3[18] = 2006 WriteChannelPort4 200e => ch3[18] ReadChannelPort4 ch3[18] = 2006 final CMD 0x2006 UniataAhciStartFR: lChan 3 ReadChannelPort4 ch3[18] = 2006 CMD 0x2006 WriteChannelPort4 2016 => ch3[18] UniataAhciStart: lChan 3 ReadChannelPort4 ch3[10] = 0 WriteChannelPort4 0 => ch3[10] SError 0x800, IS 0x0 ReadChannelPort4 ch3[18] = 6016 CMD 0x6016 WriteChannelPort4 6017 => ch3[18] UniataAhciSendCommand: lChan 3 WriteChannelPort4 1 => ch3[38] ReadChannelPort4 ch3[38] = 1 ReadChannelPort4 ch3[10] = 0 ReadChannelPort4 ch3[38] = 0 CI 0x0 ReadChannelPort4 ch3[10] = 0 IS 0x0 WriteChannelPort4 0 => ch3[10] UniataAhciSendCommand: lChan 3 WriteChannelPort4 1 => ch3[38] ReadChannelPort4 ch3[38] = 1 ReadChannelPort4 ch3[10] = 0 ReadChannelPort4 ch3[38] = 0 CI 0x0 ReadChannelPort4 ch3[10] = 0 IS 0x0 WriteChannelPort4 0 => ch3[10] UniataAhciWaitReady: lChan 3 ReadChannelPort4 ch3[20] = 150 TFD 0x150 34 00 50 01 01 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 IssueIdentify: Checking for IDE. Status (0x50) UniataAhciSendPIOCommand: cntrlr 0x1:0x3 dev 0x0, cmd 0xec, lba 0x0 bcount 0x0 feature 0x0, buff 0xb741f838, len 0x200, WF 0x2 length/DEV_BSIZE != bcount BuildAhciInternalSrb: lChan 3 [0x0] Srb 0xb71fc350, AtaReq 0xb71d6000, CMD 0xb71d6080 ph 0 AHCI setup FIS b71d6080, ch 3, dev 0 27 80 ec 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 assume IN AtapiDmaSetup: mode 0x48, data b741f838, count 200, lCh 3, dev 0 get Phys(AHCI_CMD=b71d6080) get Phys(data[0]=b741f838) set TERM ph data[0]=0:a125838 (1ff) AtapiDmaSetup: OK UniataAhciBeginTransaction: lChan 3, AtaReq 0xb71d6000 AHCI AtaReq CMD 0xb71d6080 (ph 0x9edc080) prd_length 0x1, flags 0x5, base 9edc080 ReadChannelPort4 ch3[18] = 6017 CMD 0x6017 WriteChannelPort4 1 => ch3[38] ReadChannelPort4 ch3[38] = 1 ReadChannelPort4 ch3[10] = 2 CI 0x1 ReadChannelPort4 ch3[10] = 2 IS 0x2 WriteChannelPort4 2 => ch3[10] UniataAhciStatus(3-3): hIS 0x0 UniataAhciEndTransaction: lChan 3 ReadChannelPort4 ch3[20] = 50 TFD 0x50 ReadChannelPort4 ch3[34] = 0 ReadChannelPort4 ch3[38] = 0 IssueIdentify: Status after read words 0x50 Model: TS530023A0 S FW: DS51 S/N: Q95MM5CG Pio: 2 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 40 SATA support: 40, CAPve: 48 Accoustic 254, cur 0 AdvPowerMode 0, cur 0 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x41041 NumOfSectors 0xffffff0 SupportLba flag 0x1 MajorRevision 0x1f0 UserAddressableSectors 0xfffffff LBA mode LBA48 cylinders 0xec93a NativeNumOfSectors 0x3a385460 Update NumOfSectors to 0x3a385460 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 (ahci) UniataAhciSendPIOCommand: cntrlr 0x1:0x3 dev 0x0, cmd 0x27, lba 0x0 bcount 0x0 feature 0x0, buff 0x0, len 0x0, WF 0x3 BuildAhciInternalSrb: lChan 3 [0x0] Srb 0xb71fc350, AtaReq 0xb71d6000, CMD 0xb71d6080 ph 9edc080 AHCI setup FIS b71d6080, ch 3, dev 0 27 80 27 00 00 00 00 e0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTra0 AHCI AtaReq CMD 0xb71d6080 (ph 0x9edc080) prd_length 0x0, flags 0x5, base 9edc080 ReadChannelPort4 ch3[18] = 6017 CMD 0x6017 WriteChannelPort4 1 => ch3[38] ReadChannelPort4 ch3[38] = 1 ReadChannelPort4 ch3[10] = 1 CI 0x1 ReadChannelPort4 ch3[10] = 1 IS 0x1 WriteChannelPort4 1 => ch3[10] UniataAhciStatus(3-3): hIS 0x0 UniataAhciEndTransaction: lChan 3 ReadChannelPort4 ch3[20] = 50 TFD 0x50 ReadChannelPort4 ch3[34] = 0 ReadChannelPort4 ch3[38] = requested LunExt->GeomType=ffffffff tmp_cylinders = 0xec93a Use GEOM_STD, CHS=ed81/ff/3f Geometry: C 0xed81 (0xed81) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb741d918 S/N:ST3500320AS_____________________________-____________9QM55MGC IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: detected AHCI Device 0x0 CheckDevice: check status: found AtapiEnableInterrupts_3: 1 WriteChannelPort4 fd4000ff => ch3[14] FindDevices: returning 1 (AHCI) AtapiHwInitialize: lChannel 0x3, dev 0 AtapiDisableInterrupts_3: 0 WriteChannelPort4 0 => ch3[14] AtapiHwInitialize: IDE branch UniataAhciSendPIOCommand: cntrlr 0x1:0x3 dev 0x0, cmd 0xc6, lba 0x0 bcount 0x0 feature 0x0, buff 0x0, len 0x0, WF 0x8 BuildAhciInternalSrb: lChan 3 [0x0] Srb 0xb71fc350, AtaReq 0xb71d6000, CMD 0xb71d6080 ph 9edc080 AHCI setup FIS b71d6080, ch 3, dev 0 27 80 c6 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 3, AtaReq 0xb71d6000 AHCI AtaReq CMD 0xb71d6080 (ph 0x9edc080) prd_length 0x0, flags 0x5, base 9edc080 ReadChannelPort4 ch3[18] = 6017 CMD 0x6017 WriteChannelPort4 1 => ch3[38] ReadChannelPort4 ch3[38] = 1 ReadChannelPort4 ch3[10] = 1 CI 0x1 ReadChannelPort4 ch3[10] = 1 IS 0x1 WriteChannelPort4 1 => ch3[10] UniataAhciStatus(3-3): hIS 0x0 UniataAhciEndTransaction: lChan 3 ReadChannelPort4 ch3[20] = 50 TFD 0x50 ReadChannelPort4 ch3[34] = 0 ReadChannelPort4 ch3[38] = 0 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 0 Try Enable Read Cache UniataAhciSendPIOCommand: cntrlr 0x1:0x3 dev 0x0, cmd 0xef, lba 0x0 bcount 0x0 feature 0xaa, buff 0x0, len 0x0, WF 0x8 BuildAhciInternalSrb: lChan 3 [0x0] Srb 0xb71fc350, AtaReq 0xb71d6000, CMD 0xb71d6080 ph 9edc080 AHCI setup FIS b71d6080, ch 3, dev 0 27 80 ef aa 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 3, AtaReq 0xb71d6000 AHCI AtaReq CMD 0xb71d6080 (ph 0x9edc080) prd_length 0x0, flags 0x5, base 9edc080 ReadChannelPort4 ch3[18] = 6017 CMD 0x6017 WriteChannelPort4 1 => ch3[38] ReadChannelPort4 c0] = 1 CI 0x1 ReadChannelPort4 ch3[10] = 1 IS 0x1 WriteChannelPort4 1 => ch3[10] UniataAhciStatus(3-3): hIS 0x0 UniataAhciEndTransaction: lChan 3 ReadChannelPort4 ch3[20] = 50 TFD 0x50 ReadChannelPort4 ch3[34] = 0 ReadChannelPort4 ch3[38] = 0 Try Enable Write Cache UniataAhciSendPIOCommand: cntrlr 0x1:0x3 dev 0x0, cmd 0xef, lba 0x0 bcount 0x0 feature 0x2, buff 0x0, len 0x0, WF 0x8 BuildAhciInternalSrb: lChan 3 [0x0] Srb 0xb71fc350, AtaReq 0xb71d6000, CMD 0xb71d6080 ph 9edc080 AHCI setup FIS b71d6080, ch 3, dev 0 27 80 ef 02 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 3, AtaReq 0xb71d6000 AHCI AtaReq CMD 0xb71d6080 (ph 0x9edc080) prd_length 0x0, flags 0x5, base 9edc080 ReadChannelPort4 ch3[18] = 6017 CMD 0x6017 WriteChannelPort4 1 => ch3[38] ReadChannelPort4 ch3[38] = 1 ReadChannelPort4 ch3[10] = 1 CI 0x1 ReadChannelPort4 ch3[10] = 1 IS 0x1 WriteChannelPort4 1 => ch3[10] UniataAhciStatus(3-3): hIS 0x0 UniataAhciEndTransaction: lChan 3 ReadChannelPort4 ch3[20] = 50 TFD 0x50 ReadChannelPort4 ch3[34] = 0 ReadChannelPort4 ch3[38] = 0 Try Enable Adv. Power Mgmt UniataAhciSendPIOCommand: cntrlr 0x1:0x3 dev 0x0, cmd 0xef, lba 0x0 bcount 0x80 feature 0x5, buff 0x0, len 0x0, WF 0x8 length/DEV_BSIZE != bcount BuildAhciInternalSrb: lChan 3 [0x0] Srb 0xb71fc350, AtaReq 0xb71d6000, CMD 0xb71d6080 ph 9edc080 AHCI setup FIS b71d6080, ch 3, dev 0 27 80 ef 05 00 00 00 a0 00 00 00 00 80 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 3, AtaReq 0xb71d6000 AHCI AtaReq CMD 0xb71d6080 (ph 0x9edc080) prd_length 0x0, flags 0x5, base 9edc080 ReadChannelPort4 ch3[18] = 6017 CMD 0x6017 WriteChannelPort4 1 => ch3[38] ReadChannelPort4 ch3[38] = 1 ReadChannelPort4 ch3[10] = 40000001 CI 0x1 ReadChannelPort4 ch3[10] = 40000001 IS 0x40000001 WriteChannelPort4 40000001 => ch3[10] UniataAhciStatus(3-3): hIS 0x0 UniataAhciEndTransaction: lChan 3 ReadChannelPort4 ch3[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch3[34] = 0 ReadChannelPort4 ch3[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x51, error 0x4 AHCI port 3 Base: 0xf7811280 MemIo 1 Proc 0 AHCI3_0x0 (0xf7811280) = 0x9ed3000 AHCI3_0x4 (0xf7811284) = 0x0 AHCI3_0x8 (0xf7811288) = 0x9ed3400 AHCI3_0xc (0xf781128c) = 0x0 AHCI3_0x10 (0xf7811290) = 0x0 AHCI3_0x14 (0xf7811294) = 0x0 AHCI3_0x18 (0xf7811298) = 0x6017 AHCI3_0x1c (0xf781129c) = 0x0 AHCI3_0x20 (0xf78112a0) = 0x451 AHCI3_0x24 (0xf78112a4) = 0x101 AHCI3_0x28 (0xf78112a8) = 0x123 AHCI3_0x2c (0xf78112ac) = 0x300 AHCI3_0x30 (0xf78112b0) = 0x800 AHCI3_0x34 (0xf78112b4) = 0x0 AHCI3_0x38 (0xf78112b8) = 0x1 AHCI3_0x3c (0xf78112bc) = 0x0 UniataAhciStop: lChan 3 ReadChannelPort4 ch3[18] = 6017 WriteChannelPort4 6016 => ch3[18] ReadChannelPort4 ch3[18] = 6016 final CMD 0x6016 UniataAhciStopFR: lChan 3 ReadChannelPort4 ch3[18] = 6016 CMD 0x6016 WriteChannelPort4 6006 => ch3[18] ReadChannelPort4 ch3[18] = 2006 final CMD 0x2006 UniataAhciCLO: lChan 3 send CLO ReadChannelPort4 ch3[18] = 2006 WriteChannelPort4 200e => ch3[18] ReadChannelPort4 ch3[18] = 2006 final CMD 0x2006 UniataAhciStartFR: lChan 3 ReadChannelPort4 ch3[18] = 2006 CMD 0x2006 WriteChannelPort4 2016 => ch3[18] UniataAhciStart: lChan 3 ReadChannelPort4 ch3[10] = 0 WriteChannelPort4 0 => ch3[10] SError 0] = 6016 CMD 0x6016 WriteChannelPort4 6017 => ch3[18] AHCI port 3 Base: 0xf7811280 MemIo 1 Proc 0 AHCI3_0x0 (0xf7811280) = 0x9ed3000 AHCI3_0x4 (0xf7811284) = 0x0 AHCI3_0x8 (0xf7811288) = 0x9ed3400 AHCI3_0xc (0xf781128c) = 0x0 AHCI3_0x10 (0xf7811290) = 0x0 AHCI3_0x14 (0xf7811294) = 0x0 AHCI3_0x18 (0xf7811298) = 0xe017 AHCI3_0x1c (0xf781129c) = 0x0 AHCI3_0x20 (0xf78112a0) = 0x451 AHCI3_0x24 (0xf78112a4) = 0x101 AHCI3_0x28 (0xf78112a8) = 0x123 AHCI3_0x2c (0xf78112ac) = 0x300 AHCI3_0x30 (0xf78112b0) = 0x800 AHCI3_0x34 (0xf78112b4) = 0x0 AHCI3_0x38 (0xf78112b8) = 0x0 AHCI3_0x3c (0xf78112bc) = 0x0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 IDE_STATUS_ERROR detected on entry, statusByte = 0x51 SAode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 3/0 AtapiDisableInterrupts_3: 1 WriteChannelPort4 0 => ch3[14] UniataAhciSendPIOCommand: cntrlr 0x1:0x3 dev 0x0, cmd 0xef, lba 0x0 bcount 0x46 feature 0x3, buff 0x0, len 0x0, WF 0x8 length/DEV_BSIZE != bco[0x0] Srb 0xb71fc350, AtaReq 0xb71d6000, CMD 0xb71d6080 ph 9edc080 AHCI setup FIS b71d6080, ch 3, dev 0 27 80 ef 03 00 00 00 a0 00 00 00 00 46 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 3, AtaReq 0xb71d6000 AHCI AtaReq CMD 0xb71d6080 (ph 0x9edc080) prd_length 0x0, flags 0x5, base 9edc080 ReadChannelPort4 ch3[18] = e017 CMD 0xe017 WriteChannelPort4 1 => ch3[38] ReadChannelPort4 ch3[38] = 1 ReadChannelPort4 ch3[10] = 1 CI 0x1 ReadChannelPort4 ch3[10] = 1 IS 0x1 WriteChannelPort4 1 => ch3[10] UniataAhciStatus(3-3): hIS 0x0 UniataAhciEndTransaction: lChan 3 ReadChannelPort4 ch3[20] = 50 TFD 0x50 ReadChannelPort4 ch3[34] = 0 ReadChannelPort4 ch3[38] = 0 AtapiEnableInterrupts_3: 2 Using 0x48 mode AtapiEnableInterrupts_3: 1 WriteChannelPort4 fd4000ff => ch3[14] AtapiChipInit: dev 0xffffffff, ph chan 4, c 4 HwFlags: 0x12000000 VendorID/DeviceID/Rev 0x1002/0x4391/0x0 AHCI single channel init UniataAhciReset: lChan 4 WriteChannelPort4 0 => ch4[14] UniataAhciHardReset: eadChannelPort4 ch4[18] = e017 WriteChannelPort4 e016 => ch4[18] ReadChannelPort4 ch4[18] = 6016 final CMD 0x6016 UniataSataPhyEnable: SControl 0x0 UniataSataPhyEnable: retry init 0 SControl 00000001 UniataSataPhyEnable: retry idle 0 SControl 00000300 UniataSataConnect: UniataSataConnect: SStatus 00000000 no PHY No devices in all LUNs WriteChannelPort4 80400sableInterrupts_4: 0 WriteChannelPort4 0 => ch4[14] max_ldev 1 CheckDevice: Device 0x0 SStev_NoPhy AtapiEnableInterrupts_4: 1 WriteChannelPort4 fd4000ff => ch4[14] FindDevices: returning 0 (AHCI) AtapiHwInitialize: lChannel 0x4, dev 0 AtapiChipInit: dev 0xffffffff, ph chan 5, c 5 HwFlags: 0x12000000 VendorID/DeviceID/Rev 0x1002/0x4391/0x0 AHCI single channel init UniataAhciReset: lChan 5 WriteChannelPort4 0 => ch5[14] UniataAhciHardReset: lChan 5 UniataAhciStop: lChan 5 ReadChannelPort4 ch5[18] = e017 WriteChannelPort4 e016 => ch5[18] ReadChannelPort4 ch5[18] = 6016 final CMD 0x6016 UniataSataPhyEnable: SControl 0x0 UniataSataPhyEnable: retry init 0 SControl 00000001 UniataSataPhyEnable: retry idle 0 SControl 00000300 UniataSataConnect: UniataSataConnect: SStatus 00000000 no PHY No devices in all LUNs WriteChannelPort4 80400040 => ch5[14] FindDevices: AtapiDisableInterrupts_5: 0 WriteChannelPort4 0 => ch5[14] max_ldev 1 CheckDevice: Device 0x0 SStatus 0 SATA DET <= SStatus_DET_Dev_NoPhy AtapiEnableInterrupts_5: 1 WriteChannelPort4 fd4000ff => ch5[14] FindDevicesalize: lChannel 0x5, dev 0 AtapiHwInitialize: (base) done TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x43911002/0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf7884f98 TopLevel (3), AtaReq 0xb71ba000 SStatus 0 SATA DET <= SStatus_DET_Dev_NoPhy AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf7884f98 complete with status 0xa AtapiStartIo: AtapiDmaDBSync(b71d1000, f7884f98) AtapiStartIo: UniataRemoveRequest(b71d1000, f7884f98) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71d1000, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x43911002/0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf7884f98 TopLevel (3), AtaReq 0xb71ba000 SStatus 0 SATA DET <= SStatus_DET_Dev_NoPhy AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf7884f98 complete with status 0xa AtapiStartIo: AtapiDmaDBSync(b71d1268, f7884f98) AtapiStartIo: UniataRemoveRequest(b71d1268, f7884f98) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71d1268, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x0:0x0 VendorID+DeviceID/Rev 0x43911002/0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf7884f98 TopLevel (3), AtaReq 0xb71ba000 SStatus 0 SATA DET <= SStatus_DET_Dev_NoPhy AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf7884f98 complete with status 0xa AtapiStartIo: AtapiDmaDBSync(b71d14d0, f7884f98) AtapiStartIo: UniataRemoveRequest(b71d14d0, f7884f98) AtapiStartIo: ScsiPortNotirRequest AtapiStartIo: chan b71rb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x3:0x0:0x0 VendorID+DeviceID/Rev 0x43911002/0x0 SRB 0xf7884f98, CDB 0xf7884fc8, AtaReq 0xb71ba000, SCmd 0x12 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf7884f98 TopLevel (3), AtaReq 0xb71ba000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7884c80 ** Ide: Command AtaReq 0xb71ba000 ** --- ** IdeSendCommand: SCSIOP_INQUIRY PATH:LUN:TID = 0x3:0x0:0x0 IdeSendCommand: SCSIOP_INQUIRY ok SStatus 123 AHCI check ReadChannelPort4 ch3[24] = 101 AHCI HDD at home RelativeAddressing IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf7884f98 complete with status 0x1 AtapiStartIo: AtapiDmaDBSync(b71d1738, f7884f98) AtapiStartIo: UniataRemoveRequest(b71d1738, f7884f98) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71d1738, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x3:0x1:0x0 VendorID+DeviceID/Rev 0x43911002/0x0 AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf7884f98 complete with status 0xa AtapiStartIo: UniataRemoveRequest(0, f7884f98) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan 0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x4:0x0:0x0 VendorID+DeviceID/Rev 0x43911002/0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf7884f98 TopLevel (3), AtaReq 0xb71ba000 SStatus 0 SATA DET <= SStatus_DET_Dev_NoPhy AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf7884f98 complete with status 0xa AtapiStartIo: AtapiDmaDBSync(b71d19a0, f7884f98) AtapiStartIo: UniataRemoveRequest(b71d19a0, f7884f98) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71d19a0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x5:0x0:0x0 VendorID+DeviceID/Rev 0x43911002/0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf7884f98 TopLevel (3), AtaReq 0xb71ba000 SStatus 0 SATA DET <= SStatus_DET_Dev_NoPhy AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf7884f98 complete with status 0xa AtapiStartIo: AtapiDmaDBSync(b71d1c08, f7884f98) AtapiStartIo: UniataRemoveRequest(b71d1c08, f7884f98) AtapiStartIo: ScsiPortNotiequest AtapiStartIo: chan b71d1c08, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x6:0x0:0x0 VendorID+DeviceID/Rev 0x43911002/0x0 AtapiStartIo: Communication port INQUIRY AtapiStartIo: Srb 0xf7884f98 complete with status 0x1 AtapiStartIo: UniataRemoveRequest(0, f7884f98) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan 0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopL, PATH:LUN:TID = 0x6:0x1:0x0 VendorID+DeviceID/Rev 0x43911002/0x0 AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf7884f98 complete with status 0xa AtapiStartIo: UniataRemoveRequest(0, f7884f98) AtapiStartIo: ScsiPortNotification AtapiStartIo: Uniata, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request ScsiPortInitialize Status 0x0 Parameter IgnoreNativePci Parameter IgnoreNativePci = 0x0 Try init 1b4b 9123 (hal/halx86/legacy/bussupp.c:1159) Slot assignment for 5 on bus 2 (hal/halx86/legacy/bus/pcibus.c:715) WARNING: PCI Slot Resource Assignment is FOOBAR UniataFindBusMasterController: Context=2, BMListLen=4 ConfigInfo->Length 8c bm_offset 0, channel 0 AdapterInterfaceType=0x5 IoBusNumber=0x2 slotNumber=0x0 busDataRead DevId = 91231B4B Class = 0001/0006 Storage Class unknown UniataChipDetect: HwFlags: 0x0 Parameter ForceSimplex Parameter ForceSimplex = 0x0 i: 0xffffffff AHCI candidate UniataAhciDetect: Parameter IgnoreAhci Parameter IgnoreAhci = 0x0 AtapiGetIoRange: AtapiGetIoRange: rid 0x5, start 0xfddff000, offs 0x0, len 0x10, mem 0x1 AtapiGetIoRange: 0xf7810000 MemIo AHCI Base: 0xf7810000 MemIo 1 Proc 0 AHCI_0x0 (0xf7810000) = 0xc0309f07 AHCI_0x4 (0xf7810004) = 0x80000002 AHCI_0x8 (0xf7810008) = 0x0 AHCI_0xc (0xf781000c) = 0xff AHCI_0x10 (0xf7810010) = 0x10200 check AHCI mode, GHC 0x80000002 AHCI CAP 0xc0309f07, CAP2 0x0 64bit NCQ AHCI PI 0xff CommandSlots 31 Channels 8 AHCI version 0x1.20 controller with 8 ports (mask 0xff) detected AHCI SATA Gen 3 PM not supported -> 1 lun/chan AHCI detect status 1 unknown Adev, BM addr 0xdb00 MaxTransferMode 0x49 UniataChipDetectChannels: Parameter IgnoreAhciPM Parameter IgnoreAhciPM = 0x1 SATA/AHCI w/o PM, max luns 1 or 2 allocate 2 Luns for 8 channels ForceSimplex = 0 HwFlags = 121)HwFlags = 12000000 (2)found suitable device HwFlags = 12000000 (3) AHCI registers layout4132b4 AtapiReadChipConfig: dev 0x2, ph chan -1 Parameter ForceSimplex Parameter ForceSimplex = 0x0 MaxTransferMode (base): 0x49 Parameter MaxTransferMode Parameter MaxTransferMode = 0x49 MaxTransferMode (overriden): 0x49 Parameter MaxTransferMode Parameter MaxTransferMode = 0x49 MaxTransferMode (overriden): 0x49 Parameter MaxTransferMode Parameter MaxTransferMode = 0x49 MaxTransferMode (overriden): 0x49 Parameter MaxTransferMode Parameter MaxTransferMode = 0x49 MaxTransferMode (overriden): 0x49 Parameter MaxTransferMode Parameter MaxTransferMode = 0x49 MaxTransferMode (overriden): 0x49 Parameter MaxTransferMode Parameter MaxTransferMode = 0x49 MaxTransferMode (overriden): 0x49 Parameter MaxTransferMode Parameter MaxTransferMode = 0x49 MaxTransferMode (overriden): 0x49 Parameter MaxTransferMode Parameter MaxTransferMode = 0x49 MaxTransferMode (overriden): 0x49 Parameter AtapiDmaZeroTransfer Parameter AtapiDmaZeroTransfer = 0x0 Parameter AtapiDmaControlCmd Parameter AtapiDmaControlCmd = 0x0 Parameter AtapiDmaRawRead Parameter AtapiDmaRawRead = 0x1 Parameter AtapiDmaReadWrite Parameter AtapiDmaReadWrite = 0x1 AtapiChipInit: dev 0x2, ph chan -2, c -1 HwFlags: 0x12000000 VendorID/DeviceID/Rev 0x1b4b/0x9123/0x11 UniataAhciInit: AHCI Base: 0xf7810000 MemIo 1 Proc 0 AHCI_0x0 (0xf7810000) = 0xc0309f07 AHCI_0x4 (0xf7810004) = 0x80000002 AHCI_0x8 (0xf7810008) = 0x0 AHCI_0xc (0xf781000c) = 0xff AHCI_0x10 (0xf7810010) = 0x10200 get GHC disable intr, GHC 0x80000002 reset AHCI controller, GHC 0x80000000 AHCI GHC 0x80000001 AHCI GHC 0x0 re-enable AHCI mode, GHC 0x0 AHCI GHC 0x80000000 AHCI CAP 0xc0309f07 AHCI 64bit AHCI 31 CMD slots AHCI multi-block PIO AHCI PI 0xff SATA Gen 3 chan 0, offs 0x100 AtapiSetupLunPtrs for channel 0 of 8, 2 luns Chan 0xb71ac000 Lun 0x0 Lun ptr 0xb71ae000 Lun 0x1 Lun ptr 0xb71ae308 AtaReq 0xb71b2000: cmd aligned b71b2080, d=20 ahci_cmd_ptr 0xb71b2080 AtapiDmaAlloc: AHCI AtapiDmaAlloc: CLP BASE b71aa000 AtapiDmaAlloc: CLP BASE 1k-aligned b71aa000 AtapiDmaAlloc: CLP Phys BASE 9eb0000 UniataAhciResume: lChan 0 WriteChannelPort4 0 => ch0[14] AHCI CLB setup WriteChannelPort4 9eb0000 => ch0[0] WriteChannelPort4 0 => ch0[4] AHCI RCV FIS setup WriteChannelPort4 9eb0400 => ch0[8] WriteChannelPort4 0 => ch0[c] WriteChannelPort4 10000006 => ch0[18] UniataAhciStartFR: lChan 0 ReadChannelPort4 ch0[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch0[18] UniataAhciS0[10] = 0 WriteChannelPort4 0 => ch0[10] SError 0x0, IS 0x0 ReadChannelPort4 ch0[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch0[18] AHCI port 0 Base: 0xf7810100 MemIo 1 Proc 0 AHCI0_0x0 (0xf7810100) = 0x9eb0000 AHCI0_0x4 (0xf7810104) = 0x0 AHCI0_0x8 (0xf7810108) = 0x9eb0400 AHCI0_0xc (0xf781010c) = 0x0 AHCI0_0x10 (0xf7810110) = 0x0 AHCI0_0x14 (0xf7810114) = 0x0 AHCI0_0x18 (0xf7810118) = 0x1000c017 AHCI0_0x1c (0xf781011c) = 0x0 AHCI0_0x20 (0xf7810120) = 0x50 AHCI0_0x24 (0xf7810124) = 0x101 AHCI0_0x28 (0xf7810128) = 0x133 AHCI0_0x2c (0xf781012c) = 0x0 AHCI0_0x30 (0xf7810130) = 0x0 AHCI0_0x34 (0xf7810134) = 0x0 AHCI0_0x38 (0xf7810138) = 0x0 AHCI0_0x3c (0xf781013c) = 0x0 chan 1, offs 0x180 AtapiSetupLunPtrs for channel 1 of 8, 2 luns Chan 0xb71ac268 Lun 0x0 Lun ptrxb71ae918 AtaReq 0xb71b3000: cmd aligned b71b3080, d=20 ahci_cmd_ptr 0xb71b3080 AtapiDmaAlloc: AHCI AtapiDmaAlloc: CLP BASE b71a8000 AtapiDmaAlloc: CLP BASE 1k-aligned b71a8000 AtapiDmaAlloc: CLP Phys BASE 9eae000 UniataAhciResume: lChan 1 WriteChannelPort4 0 => ch1[14] AHCI CLB setup WriteChannelPort4 9eae000 => ch1[0] WriteChannelPort4 0 => ch1[4] AHCI RCV FIS setup WriteChannelPort4 9eae400 => ch1[8] WriteChannelPort4 0 => ch1[c] WriteChannelPort4 10000006 => ch1[18] UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch1[18] UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch1[18] AHCI port 1 Base: 0xf7810180 MemIo 1 Proc 0 AHCI1_0x0 (0xf7810180) = 0x9eae000 AHCI1_0x4 (0xf7810184) = 0x0 AHCI1_0x8 (0xf7810188) = 0x9eae400 AHCI1_0xc (0xf781018c) = 0x0 AHCI1_0x10 (0xf7810190) = 0x0 AHCI1_0x14 (0xf7810194) = 0x0 AHCI1_0x18 (0xf7810198) = 0x1000c017 AHCI1_0x1c (0xf781019c) = 0x0 AHCI1_0x20 (0xf78101a0) = 0x7f AHCI1_0x24 (0xf78101a4) = 0xffffffff AHCI1_0x28 (0xf78101a8) = 0x0 AHCI1_0x2c (0xf78101ac) = 0x0 AHCI1_0x30 (0xf78101b0) = 0x0 AHCI1_0x34 (0xf78101b4) = 0x0 AHCI1_0x38 (0xf78101b8) = 0x0 AHCI1_0x3c (0xf78101bc) = 0x0 chan 2, offs 0x200 AtapiSetupLunPtrs for channel 2 of 8, 2 luns Chan 0xb71ac4d0 Lun 0x0 Lun ptr 0xb71aec20 Lun 0x1 Lun ptr 0xb71aef28 AtaReq 0xb71b4000: cmd aligned b71b4080, d=20 ahci_cmd_ptr 0xb71b4080 AtapiDmaAlloc: AHCI AtapiDmaAlloc: CLP BASE b71a6000 AtapiDmaAlloc: CLP BASE 1k-aligned b71a6000 AtapiDmaAlloc: CLP Phys BASE 9eac000 UniataAhciResume: lChan 2 WriteChannelPort4 0 => ch2[14] AHCI CLB setup WriteChannelPort4 9eac000 => ch2[0] WriteChannelPort4 0 => ch2[4] AHCI RCV FIS setup WriteChannelPort4 9eac400 => ch2[8] WriteChannelPort4 0 => ch2[c] WriteChannelPort4 10000006 => ch2[18] UniataAhciStartFR: lChan 2 ReadChannelPort4 ch2[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch2[18] UniataAhciStart: lChan 2 ReadChannelPort4 ch2[10] SError 0x0, IS 0x0 ReadChannelPort4 ch2[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch2[18] AHCI port 2 Base: 0xf7810200 MemIo 1 Proc 0 AHCI2_0x0 (0xf7810200) = 0x9eac000 AHCI2_0x4 (0xf7810204) = 0x0 AHCI2_0x8 (0xf7810208) = 0x9eac400 AHCI2_0xc (0xf781020c) = 0x0 AHCI2_0x10 (0xf7810210) = 0x0 AHCI2_0x14 (0xf7810214) = 0x0 AHCI2_0x18 (0xf7810218) = 0x1000c017 AHCI2_0x1c (0xf781021c) = 0x0 AHCI2_0x20 (0xf7810220) = 0x7f AHCI2_0x24 (0xf7810224) = 0xffffffff AHCI2_0x28 (0xf7810228) = 0x0 AHCI2_0x2c (0xf781022c) = 0x0 AHCI2_0x30 (0xf7810230) = 0x0 AHCI2_0x34 (0xf7810234) = 0x0 AHCI2_0x38 (0xf7810238) = 0x0 AHCI2_0x3c (0xf781023c) = 0x0 chan 3, offs 0x280 AtapiSetupLunPtrs for channel 3 of 8, 2 luns Chan 0xb71ac738 Lun 0x0 Lun ptr 0xb71af230 Lun 0x1 Lun ptr 0xb71af538 AtaReq 0xb71b5000: cmd aligned b71b5080, d=20 ahci_cmd_ptr 0xb71b5080 AtapiDmaAlloc: AHCI AtapiDmaAlloc: CLP BASE b71a4000 AtapiDmaAlloc: CLP BASE 1k-aligned b71a4000 AtapiDmaAlloc: CLP Phys BASE 9eaa000 UniataAhciResume: lChan 3 WriteChannelPort4 0 => ch3[14] AHCI CLB setup WriteChannelPort4 9eaa000 => ch3[0] WriteChannelPort4 0 => ch3[4] AHCI RCV FIS setup WriteChannelPort4 9eaa400 => ch3[8] WriteChannelPort4 0 => ch3[c] WriteChannelPort4 10000006 => ch3[18] UniataAhciStartFR: lChan 3 ReadChannelPort4 ch3[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch3[18] UniataAhciStart: lChan 3 ReadChannelPort4 ch3[10] = 0 WriteChannelPort4 0 => ch3[10] SError 0x0, IS 0x0 ReadChannelPort4 ch3[18] = 10004016 C0004017 => ch3[18] AHCI port 3 Base: 0xf7810280 MemIo 1 Proc 0 AHCI3_0x0 (0xf7810280) = 0x9eaa000 AHCI3_0x4 (0xf7810284) = 0x0 AHCI3_0x8 (0xf7810288) = 0x9eaa400 AHCI3_0xc (0xf781028c) = 0x0 AHCI3_0x10 (0xf7810290) = 0x0 AHCI3_0x14 (0xf7810294) = 0x0 AHCI3_0x18 (0xf7810298) = 0x1000c017 AHCI3_0x1c (0xf781029c) = 0x0 AHCI3_0x20 (0xf78102a0) = 0x7f AHCI3_0x24 (0xf78102a4) = 0xffffffff AHCI3_0x28 (0xf78102a8) = 0x0 AHCI3_0x2c (0xf78102ac) = 0x0 AHCI3_0x30 (0xf78102b0) = 0x0 AHCI3_0x34 (0xf78102b4) = 0x0 AHCI3_0x38 (0xf78102b8) = 0x0 AHCI3_0x3c (0xf78102bc) = 0x0 chan 4, offs 0x300 AtapiSetupLunPtrs for channel 4 of 8, 2 luns Chan 0xb71ac9a0 Lun 0x0 Lun ptr 0xb71af840 Lun 0x1 Lun ptr 0xb71afb48 AtaReq 0xb71b6000: cmd aligned b71b6080, d=20 ahci_cmd_ptr 0xb71b6080 AtapiDmaAlloc: AHCI AtapiDmaAlloc: CLP BASE b71a2000 AtapiDmaAlloc: CLP BASE 1k-aligned b71a2000 AtapiDmaAlloc: CLP Phys BASE 9ea8000 UniataAhciResume: lChan 4 WriteChannelPort4 0 => ch4[14] AHCI CLB setup WriteChannelPort4 9ea8000 => ch4[0] WriteChannelPort4 0 iteChannelPort4 9ea8400 => ch4[8] WriteChannelPort4 0 => ch4[c] WriteChannelPort4 10000006 => ch4[18] UniataAhciStartFR: lChan 4 ReadChannelPort4 ch4[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch4[18] UniataAhciStart: lChan 4 ReadChannelPort4 ch4[10] = 0 WriteChannelPort4 0 => ch4[10] SError 0x0, IS 0x0 ReadChannelPort4 ch4[18] = 10004016 CMD 0x10004016 WriteChannelPort4 1000e: 0xf7810300 MemIo 1 Proc 0 AHCI4_0x0 (0xf7810300) = 0x9ea8000 AHCI4_0x4 (0xf7810304) = 0x0 AHCI4_0x8 (0xf7810308) = 0x9ea8400 AHCI4_0xc (0xf781030c) = 0x0 AHCI4_0x10 (0xf7810310) = 0x0 AHCI4_0x14 (0xf7810314) = 0x0 AHCI4_0x18 (0xf7810318) = 0x1000c017 AHCI4_0x1c (0xf781031c) = 0x0 AHCI4_0x20 (0xf7810320) = 0x7f AHCI4_0x24 (0xf7810324) = 0xffffffff AHCI4_0x28 (0xf7810328) = 0x0 AHCI4_0x2c (0xf781032c) = 0x0 AHCI4_0x30 (0xf7810330) = 0x0 AHCI4_0x34 (0xf7810334) = 0x0 AHCI4_0x38 (0xf7810338) = 0x0 AHCI4_0x3c (0xf781033c) = 0x0 chan 5, offs 0x380 AtapiSetupLunPtrs for channel 5 of 8, 2 luns Chan 0xb71acc08 Lun 0x0 Lun ptr 0xb71afe50 Lun 0x1 Lun ptr 0xb71b0158 AtaReq 0xb71b7000: cmd aligned b71b7080, d=20 ahci_cmd_ptr 0xb71b7080 AtapiDmaAlloc: AHCI AtapiDmaAlloc: CLP BASE b71a0000 AtapiDmaAlloc: CLP BASE 1k-aligned b71a0000 AtapiDmaAlloc: CLP Phys BASE 9ea6000 UniataAhciR => ch5[14] AHCI CLB setup WriteChannelPort4 9ea6000 => ch5[0] WriteChannelPort4 0 => ch5[4] AHCI RCV FIS setup WriteChannelPort4 9ea6400 => ch5[8] WriteChannelPort4 0 => ch5[c] WriteChannelPort4 10000006 => ch5[1adChannelPort4 ch5[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch5[18] UniataAhciStart: lChan 5 ReadChannelPort4 ch5[10] = 0 WriteChannelPort4 0 => ch5[10] SError 08] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch5[18] AHCI port 5 Base: 0xf7810380 MemIo 1 Proc 0 AHCI5_0x0 (0xf7810380) = 0x9ea6000 AHCI5_0x4 (0xf7810384) = 0x0 AHCI5_0x8 (0xf7810388) = 0x9ea6400 AHCI5_0xc (0xf781038c) = 0x0 AHCI5_0x10 (0xf7810390) = 0x0 AHCI5_0x14 (0xf7810394) = 0x0 AHCI5_0x18 (0xf7810398) = 0x1000c017 AHCI5_0x1c (0xf781039c) = 0x0 AHCI5_0x20 (0xf78103a0) = 0x7f AHCI5_0x24 (0xf78103a4) = 0xffffffff AHCI5_0x28 (0xf78103a8) = 0x0 AHCI5_0x2c (0xf78103ac) = 0x0 AHCI5_0x30 (0xf78103b0) = 0x0 AHCI5_0x34 (0xf78103b4) = 0x0 AHCI5_0x38 (0xf78103b8) = 0x0 AHCI5_0x3c (0xf78103bc) = 0x0 chan 6, offs 0x400 AtapiSetupLunPtrs for channel 6 of 8, 2 luns Chan 0xb71ace70 Lun 0x0 Lun ptr 0xb71b0460 Lun 0x1 Lun ptr 0xb71b0768 AtaReq 0xb71b8000: cmd aligned b71b8080, d=20 ahci_cmd_ptr 0xb71b8080 AtapiDmaAlloc: AHCI AtapiDmaAlloc: CLP BASE b719e000 AtapiDmaAlloc: CLP BASE 1k-aligned b719e000 AtapiDmaAlloc: CLP Phys BASE 9ea4000 UniataAhciResume: lChan 6 WriteChannelPort4 0 => ch6[14] AHCI CLB setup WriteChannelPort4 9ea4000 => ch6[0] WriteChannelPort4 0 => ch6[4] AHCI RCV FIS setup WriteChannelPort4 9ea4400 => ch6[8] WriteChannelPort4 0 => ch6[c] WriteChannelPort4 10000006 => ch6[18] UniataAhciStartFR: lChan 6 ReadChannelPort4 ch6[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch6[18] UniataAhciStart: lChan 6 ReadChannelPort4 ch6[10] = 0 WriteChannelPort4 0 => ch6[10] SError 0x0, IS 0x0 ReadChannelPort4 ch6[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch6[18] AHCI port 6 Base: 0xf7810400 MemIo 1 Proc 0 AHCI6_0x0 (0xf7810400) = 0x9ea4000 AHCI6_0x4 (0xf7810404) = 0x0 AHCI6_0x8 (0xf7810408) = 0x9ea4400 AHCI6_0xc (0xf781040c) = 0x0 AHCI6_0x10 (0xf7810410) = 0x0 AHCI6_0x14 (0xf7810414) = 0x0 AHCI6_0x18 (0xf7810418) = 0x1000c017 AHCI6_0x1c (0xf781041c) = 0x0 AHCI6_0x20 (0xf7810420) = 0x7f AHCI6_0x24 (0xf7810424) = 0xffffffff AHCI6_0x28 (0xf7810428) = 0x0 AHCI6_0x2c (0xf781042c) = 0x0 AHCI6_0x30 (0xf7810430) = 0x0 AHCI6_0x34 (0xf7810434) = 0x0 AHCI6_0x38 (0xf7810438) = 0x0 AHCI6_0x3c (0xf781043c) = 0x0 chan 7, offs 0x480 AtapiSetupLunPtrs for channel 7 of 8, 2 luns Chan 0xb71ad0d8 Lun 0x0 Lun ptr 0xb71b0a70 Lun 0x1 Lun ptr 0xb71b0d78 AtaReq 0xb71b9000: cmd aligned b71b9080, d=20 ahci_cmd_ptr 0xb71b9080 AtapiDmaAlloc: AHCI AtapiDmaAlloc: CLP BASE b719c000 AtapiDmaAlloc: CLP BASE 1k-aligned b719c000 AtapiDmaAlloc: CLP Phys BASE 9ea2000 UniataAhciResume: lChan 7 WriteChannelPort4 0 => ch7[14] AHCI CLB setup WriteChannelPort4 9ea2000 => ch7[0] WriteChannelPort4 0 => ch7[4] AHCI RCV FIS setup WriteChannelPort4 9ea2400 => ch7[8] WriteChannelPort4 0 => ch7[c] WriteChannelPort4 10000006 => ch7[18] UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0x0 AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x50 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x0 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 HCI7_0x3c (0xf78104bc) = 0x0 simplexOnly = 0 (2)!MasterDev update ConfigInfo->nt4 using AtaReq sz 1000 update ConfigInfo->w2k: 64bit 1 chan[0] InterruptMode: 0, Level 5, Level2 0, Vector 5, Vector2 0 Reconstruct ConfigInfo set Dma32BitAddresses BMList[i].channel 0x0, NumberChannels 0x8, channel 0x0 de 0xb74132b4, Channel 0x0 chan = 0xb71ac000 AtapiSetupLunPtrs for channel 0 of 8, 2 luns Chan 0xb71ac000 Lun 0x0 Lun ptr 0xb71ae000 Lun 0x1 Lun ptr 0xb71ae308 AtaReq 0xb71b2000: cmd aligned b71b2080, d=20 ahci_cmd_ptr 0xb71b2080 AtapiReadChipConfig: devExt 0xb74132b4 AtapiReadChipConfig: dev 0x2, ph chan 0 Parameter MaxTransferMode Parameter MaxTransferMode = 0x49 MaxTransferMode (overriden): 0x49 Parameter ReorderEnable Parameter ReorderEnable = 0x1 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x49 Parameter PreferedTransferMode Parameter PreferedTransferMode =werMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 Parameter ReaEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x49 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 No more setup for AHCI channel IDX_IO1 0->0(io) IDX_IO2 10->f7810120(mem) IDX_BM_IO 14->0(io) IDX_SATA_IO 19->f7810128(mem) AtapiDmaAlloc: AHCI already initialized b71aa000 de 0xb74132b4, Channel 0x1 chan = 0xb71ac268 AtapiSetupLunPtrs for channel 1 of 8, 2 luns Chan 0xb71ac268 Lun 0x0 Lun ptr 0xb71ae610 Lun 0x1 Lun ptr 0xb71ae918 AtaReq 0xb71b3000: cmd aligned b71b3080, d=20 ahci_cmd_ptr 0xb71b3080 AtapiReadChipConfig: devExt 0xb74132b4 AtapiReadChipConfig: dev 0x2, ph chan 1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x49 MaxTransferMode (overriden): 0x49 Parameter ReorderEnable Parameter ReorderEnable = 0x1 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x49 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 ParametTransferMode = 0x49 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 No more setup for AHCI channel IDX_IO1 0->0(io) IDX_IO2 10->f78101a0(mem) IDX_BM_IO 14->0(io) IDX_SATA_IO 19->f78101a8(mem) AtapiDmaAlloc: AHCI already initialized b71a8000 de 0xb74132b4, Channel 0x2 chan = 0xb71ac4d0 AtapiSetupLunPtrs for channel 2 of 8, 2 luns Chan 0xb71ac4d0 Lun 0x0 Lun ptr 0xb71aec20 Lun 0x1 Lun ptr 0xb71aef28 AtaReq 0xb71b4000: cmd aligned b71b4080, d=20 ahci_cmd_ptr 0xb71b4080132b4 AtapiReadChipConfig: dev 0x2, ph chan 2 Parameter MaxTransferMode Parameter MaxTransferMode = 0x49 MaxTransferMode (overriden): 0x49 Parameter ReorderEnable Parameter ReorderEnable = 0x1 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x49 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x49 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 No more setup for AHCI channel IDX_IO1 0->0(io) IDX_IO2 10->f7810220(mem) IDX_BM_IO 14->0(io) IDX_SATA_IO 19->f7810228(mem) AtapiDmaAlloc: AHCI already initialized b71a6000 de 0xb74132b4, Channel 0x3 chan = 0xb71ac738 AtapiSetupLunPtrs for channel 3 of 8, 2 luns Chan 0xb71ac738 Lun 0x0 Lun ptr 0xb71af230 Lun 0x1 Lun ptr 0xb71af538 AtaReq 0xb71b5000: cmd aligned b71b5080, d=20 ahci_cmd_ptr 0xb71b5080 AtapiReadChipConfig: devExt 0xb74132b4 AtapiReadChipConfig: dev 0x2, ph chan 3 Parameter MaxTransferMode Parameter MaxTransferMode = 0x49 MaxTransferMode (overriden): 0x49 Parameter ReorderEnable Parameter ReorderEnable = 0x1 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x49 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x49 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 No more setup for AHCI channel IDX_IO1 0->0(io) IDX_IO2 10->f78102a0(mem) IDX_BM_IO 14->0(io) IDX_SATA_IO 19->f78102a8(mem) AtapiDmaAlloc: AHCI already initialized b71a4000 de 0xb74132b4, Channel 0x4 chan = 0xb71ac9a0 AtapiSetupLunPtrs for channel 4 of 8, 2 luns Chan 0xb71ac9a0 Lun 0x0 Lun ptr 0xb71af840 Lun 0x1 Lun ptr 0xb71afb48 AtaReq 0xb71b6000: cmd aligned b71b6080, d=20 ahci_cmd_ptr 0xb71b6080 AtapiReadChipConfig: devExt 0xb74132b4 AtapiReadChipConfig: dev 0x2, ph chan 4 Parameter MaxTransferMode Parameter MaxTransferMode = 0x49 MaxTransferMode (overriden): 0x49 Parameter ReorderEnable Parameter ReorderEnable = 0x1 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x49 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x49 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 No more setup for AHCI c10->f7810320(mem) IDX_BM_IO 14->0(io) IDX_SATA_IO 19->f7810328(mem) AtapiDmaAlloc: AHCI already initialized b71a2000 de 0xb74132b4, Channel 0x5 chan = 0xb71acc08 AtapiSetupLunPtrs for channel 5 of 8, 2 luns Chan 0xb71acc08 Lun 0x0 Lun ptr 0xb71afe50 Lun 0x1 Lun ptr 0xb71b0158 AtaReq 0xb71b7000: cmd aligned b71b7080, d=20 ahci_cmd_ptr 0xb71b7080 AtapiReadChipConfig: devExt 0xb74132b4 AtapiReadChipConfig: dev 0x2, ph chan 5 Parameter MaxTransferMode Parameter MaxTransferMode = 0x49 MaxTransferMode (overriden): 0x49 Parameter ReorderEnable Parameter ReorderEnable = 0x1 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x49 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 ParaeadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x49 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 No more setup for AHCI channel IDX_IO1 0->0(io) IDX_IO2 10->f78103a0(mem) IDX_BM_IO 14->0(io) IDX_SATA_IO 19->f78103a8(mem) AtapiDmaAlloc: AHCI already initialized b71a0000 de 0xb74132b4, Channel 0x6 chan = 0xb71ace70 AtapiSetupLunPtrs for channel 6 of 8, 2 luns Chan 0xb71ace70 Lun 0x0 Lun ptr 0xb71b0460 Lun 0x1 Lun ptr 0xb71b0768 AtaReq 0xb71b8000: cmd aligned b71b8080, d=20 ahci_cmd_ptr 0xb71b8080 AtapiReadChipConfig: devExt 0xv 0x2, ph chan 6 Parameter MaxTransferMode Parameter MaxTransferMode = 0x49 MaxTransferMode (overriden): 0x49 Parameter ReorderEnable Parameter ReorderEnable = 0x1 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCach= 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x49 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x49 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 No more setup for AHCI channel IDX_IO1 0->0(io) IDX_IO2 10->f7810420(mem) IDX_BM_IO 14->0(io) IDX_SATA_IO 19->f7810428(mem) AtapiDmaAlloc: AHCI already initialized b719e000 de 0xb74132b4, Channel 0x7 chan = 0xb71ad0d8 AtapiSetupLunPtrs for channel 7 of 8, 2 luns Chan 0xb71ad0d8 Lun 0x0 Lun ptr 0xb71b0a70 Lun 0x1 Lun ptr 0xb71b0d78 AtaReq 0xb71b9000: cmd aligned b71b9080, d=20 ahci_cmd_ptr 0xb71b9080 AtapiReadChipConfig: devExt 0xb74132b4 AtapiReadChipConfig: dev 0x2, ph chan 7 Parameter MaxTransferMode Parameter MaxTransferMode = 0x49 MaxTransferMode (overriden): 0x49 Parameter ReorderEnable Parameter ReorderEnable = 0x1 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x49 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 Parameter ReadCacheEnable Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Paarameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 No more se(io) IDX_IO2 10->f78104a0(mem) IDX_BM_IO 14->0(io) IDX_SATA_IO 19->f78104a8(mem) AtapiDmaAlloc: AHCI already initialized b719c000 exit: init spinlock MasterDev=0x0, NumberChannels=0x8, Isr2DevObj=0x0 Init ISR: Multichannel native mode, go... Create DO DO name: len(38, 38), \Device\uniata2_2ch HalGetInterruptVector OrigAdapterInterfaceType=5 SystemIoBusNumber=2 BusInterruptLevel=5 BusInterruptVector=5 isr2_de 0xb7413dc0 isr2_vector 0x35 isr2_irql 0x16 isr2_affinity 0x1 IoConnectInterrupt MasterDev=0x0, NumberChannels=0x8, Isr2DevObj=0xb7413d08 final chan[8] InterruptMode: 0, Level 5, Level2 0, Vector 5, Vector2 0 return SP_RETURN_FOUND AtapiHwInitialize: (base) AtapiChipInit: dev 0xffffffff, ph chan -1, c -1 HwFlags: 0x12000000 VendorID/DeviceID/Rev 0x1b4b/0x9123/0x11 UniataAhciInit: AHCI Base: 0xf7810000 MemIo 1 Proc 0 AHCI_0x0 (0xf7810000) = 0xc0309f07 AHCI_0x4 (0xf7810004) = 0x80000002 AHCI_0x8 (0xf7810008) = 0x0 AHCI_0xc (0xf781000c) = 0xff AHCI_0x10 (0xf7810010) = 0x10200 get GHC disable intr, GHC 0x80000002 reset AHCI controller, GHC 0x80000000 AHCI GHC 0x80000001 AHCI GHC 0x0 re-enable AHCI mode, GHC 0x0 AHCI GHC 0x80000000 AHCI CAP 0xc0309f07 AHCI 64bit AHCI 31 CMD slots AHCI multi-block PIO AHCI PI 0xff SATA Gen 3 chan 0, offs 0x100 AtapiSetupLunPtrs for channel 0 of 8, 2 luns Chan 0xb71ac000 Lun 0x0 Lun ptr 0xb71ae000 Lun 0x1 Lun ptr 0xb71ae308 AtaReq 0xb71b2000: cmd aligned b71b2080, d=20 ahci_cmd_ptr 0xb71b2080 AtapiDmaAlloc: AHCI already initialized b71aa000 UniataAhciResume: lChan 0 WriteChannelPort4 0 => ch0[14] AHCI CLB setup WriteChannelPort4 9eb0000 => ch0[0] WriteChannelPort4 0 => ch0[4] AHCI RCV FIS setup WriteChannelPort4 9eb0400 => ch0[8] WriteChannelPort4 0 => ch0[c] WriteChannelPort4 10000006 => ch0[18] UniataAhciStartFR: lChan 0 ReadChannelPort4 ch0[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch0[18] UniataAhciStart: lChan 0 ReadChannelPort4 ch0[10] = 0 WriteChannelPort4 0 => ch0[10] SError 0x0, IS 0x0 ReadChannelPort4 ch0[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch0[18] AHCI port 0 Base: 0xf7810100 MemIo 1 Proc 0 AHCI0_0x0 (0xf7810100) = 0x9eb0000 AHCI0_0x4 (0xf7810104) = 0x0 AHCI0_0x8 (0xf7810108) = 0x9eb0400 AHCI0_0xc (0xf781010c) = 0x0 AHCI0_0x10 (0xf7810110) = 0x0 AHCI0_0x14 (0xf7810114) = 0x0 AHCI0_0x18 (0xf7810118) = 0x1000c017 AHCI0_0x1c (0xf781011c) = 0x0 AHCI0_0x20 (0xf7810120) = 0x50 AHCI0_0x24 (0xf7810124) = 0x101 AHCI0_0x28 (0xf7810128) = 0x133 AHCI0_0x2c (0xf781012c) = 0x0 AHCI0_0x30 (0xf7810130) = 0x0 AHCI0_0x34 (0xf7810134) = 0x0 AHCI0_0x38 (0xf7810138) = 0x0 AHCI0_0x3c (0xf781013c) = 0x0 chan 1, offs 0x180 AtapiSetupLunPtrs for channel 1 of 8, 2 luns Chan 0xb71ac268 Lun 0x0 Lun ptr 0xb71ae610 Lun 0x1 Lun ptr 0xb71ae918 AtaReq 0xb71b3000: cmd aligned b71b3080, d=20 ahci_cmd_ptr 0xb71b3080 AtapiDmaAlloc: AHCI already initialized b71a8000 UniataAhciResume: lChan 1 WriteChannelPort4 0 => ch1[14] AHCI CLB setup WriteChannelPort4 9eae000 => ch1[0] WriteChannelPort4 0 => ch1[4] AHCI RCV FIS setup WriteChannelPort4 9eae400 => ch1[8] WriteChannelPort4 0 => ch1[c] WriteChannelPort4 10000006 => ch1[18] UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch1[18] UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch1[18] AHCI port 1 Base: 0xf7810180 MemIo 1 Proc 0 AHCI1_0x0 (0xf7810180) = 0x9eae000 AHCI1_0x4 (0xf7810184) = 0x0 AHCI1_0x8 (0xf7810188) = 0x9eae400 AHCI1_0xc (0xf781018c) = 0x0 AHCI1_0x10 (0xf7810190) = 0x0 AHCI1_0x14 (0xf7810194) = 0x0 AHCI1_0x18 (0xf7810198) = 0x1000c017 AHCI1_0x1c (0xf781019c) = 0x0 AHCI1_0x20 (0xf78101a0) = 0x7f AHCI1_0x24 (0xf78101a4) = 0xffffffff AHCI1_0x28 (0xf78101a8) = 0x0 AHCI1_0x2c (0xf78101ac) = 0x0 AHCI1_0x30 (0xf78101b0) = 0x0 AHCI1_0x34 (0xf78101b4) = 0x0 AHCI1_0x38 (0xf78101b8) = 0x0 AHCI1_0x3c (0xf78101bc) = 0x0 chan 2, offs 0x200 AtapiSetupLunPtrs for channel 2 of 8, 2 luns Chan 0xb71ac4d0 Lun 0x0 Lun ptr 0xb71aec20 Lun 0x1 Lun ptr 0xb71aef28 AtaReq 0xb71b4000: cmd aligned b71b4080, d=20 ahci_cmd_ptr 0xb71b4080 AtapiDmaAlloc: AHCI already initialized b71a6000 UniataAhciResume: lChan 2 WriteChannelPort4 0 => ch2[14] AHCI CLB setup WriteChannelPort4 9eac000 => ch2[0] WriteChannelPort4 0 => ch2[4] AHCI RCV FIS setup WriteChannelPort4 9eac400 => ch2[8] WriteChannelPort4 0 => ch2[c] WriteChannelPort4 10000006 => ch2[18] UniataAhciStartFR: lChan 2 ReadChannelPort4 ch2[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch2[18] UniataAhciStart: lChan 2 ReadChannelPort4 ch2[10] = 0 WriteChannelPort4 0 => ch2[10] SError 0x0, IS 0x0 ReadChannelPort4 ch2[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch2[18] AHCI port 2 Base: 0xf7810200 MemIo 1 Proc 0 AHCI2_0x0 (0xf7810200) = 0x9eac000 AHCI2_0x4 (0xf7810204) = 0x0 AHCI2_0x8 (0xf7810208) = 0x9eac400 AHCI2_0xc (0xf781020c) = 0x0 AHCI2_0x10 (0xf7810210) = 0x0 AHCI2_0x14 (0xf7810214) = 0x0 AHCI2_0x18 (0xf7810218) = 0x1000c017 AHCI2_0x1c (0xf781021c) = 0x0 AHCI2_0x20 (0xf7810220) = 0x7f AHCI2_0x24 (0xf7810224) = 0xffffffff AHCI2_0x28 (0xf7810228) = 0x0 AHCI2_0x2c (0xf781022c) = 0x0 AHCI2_0x30 (0xf7810230) = 0x0 AHCI2_0x34 (0xf7810234) = 0x0 AHCI2_0x38 (0xf7810238) = 0x0 AHCI2_0x3c (0xf781023c) = 0x0 chan 3, offs 0x280 AtapiSetupLunPtrs for channel 3 of 8, 2 luns Chan 0xb71ac738 Lun 0x0 Lun ptr 0xb71af230 Lun 0x1 Lun ptr 0xb71af538 AtaReq 0xb71b5000: cmd aligned b71b5080, d=20 ahci_cmd_ptr 0xb71b5080 AtapiDmaAlloc: AHCI already initialized b71a4000 UniataAhciResume: lChan 3 WriteChannelPort4 0 => ch3[14] AHCI CLB setup WriteChannelPort4 9eaa000 => ch3[0] WriteChannelPort4 0 => ch3[4] AHCI RCV FIS setup WriteChannelPort4 9eaa400 => ch3[8] WriteChannelPort4 0 => ch3[c] WriteChannelPort4 10000006 => ch3[18] UniataAhciStartFR: lChan 3 ReadChannelPort4 ch3[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch3[18] UniataAhciStart: lChan 3 ReadChannelPort4 ch3[10] = 0 WriteChannelPort4 0 => ch3[10] SError 0x0, IS 0x0 ReadChannelPort4 ch3[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch3[18] AHCI port 3 Base: 0xf7810280 MemIo 1 Proc 0 AHCI3_0x0 (0xf7810280) = 0x9eaa000 AHCI3_0x4 (0xf7810284) = 0x0 AHCI3_0x8 (0xf7810288) = 0x9eaa400 AHCI3_0xc (0xf781028c) = 0x0 AHCI3_0x10 (0xf7810290) = 0x0 AHCI3_0x14 (0xf7810294) = 0x0 AHCI3_0x18 (0xf7810298) = 0x1000c017 AHCI3_0x1c (0xf781029c) = 0x0 AHCI3_0x20 (0xf78102a0) = 0x7f AHCI3_0x24 (0xf78102a4) = 0xffffffff AHCI3_0x28 (0xf78102a8) = 0x0 AHCI3_0x2c (0xf78102ac) = 0x0 AHCI3_0x30 (0xf78102b0) = 0x0 AHCI3_0x34 (0xf78102b4) = 0x0 AHCI3_0x38 (0xf78102b8) = 0x0 AHCI3_0x3c (0xf78102bc) = 0x0 chan 4, offs 0x300 AtapiSetupLunPtrs for channel 4 of 8, 2 luns Chan 0xb71ac9a0 Lun 0x0 Lun ptr 0xb71af840 Lun 0x1 Lun ptr 0xb71afb48 AtaReq 0xb71b6000: cmd aligned b71b6080, d=20 ahci_cmd_ptr 0xb71b6080 AtapiDmaAlloc: AHCI already initialized b71a2000 UniataAhciResume: lChan 4 WriteChannelPort4 0 => ch4[14] AHCI CLB setup WriteChannelPort4 9ea8000 => ch4[0] WriteChannelPort4 0 => ch4[4] AHCI RCV FI ch4[8] WriteChannelPort4 0 => ch4[c] WriteChannelPort4 10000006 => ch4[18] UniataAhciStartFR: lChan 4 ReadChannelPort4 ch4[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch4[18] UniataAhciStart: lChan 4 ReadChannelPort4 ch4[10] = 0 WriteChannelPort4 0 => ch4[10] SError 0x0, IS 0x0 ReadChannelPort4 ch4[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch4[18] AHCI port 4 Base: 0xf7810300 MemIo 1 Proc 0 AHCI4_0x0 (0xf7810300) = 0x9ea8000 AHCI4_0x4 (0xf7810304) = 0x0 AHCI4_0x8 (0xf7810308) = 0x9ea8400 AHCI4_0xc (0xf781030c) = 0x0 AHCI4_0x10 (0xf7810310) = 0x0 AHCI4_0x14 (0xf7810314) = 0x0 AHCI4_0x18 (0xf7810318) = 0x1000c017 AHCI4_0x1c (0xf781031c) = 0x0 AHCI4_0x20 (0xf7810320) = 0x7f AHCI4_0x24 (0xf7810324) = 0xffffffff AHCI4_0x28 (0xf7810328) = 0x0 AHCI4_0x2c (0xf781032c) = 0x0 AHCI4_0x30 (0xf7810330) = 0x0 AHCI4_0x34 (0xf7810334) = 0x0 AHCI4_0x38 (0xf7810338) = 0x0 AHCI4_0x3c (0xf781033c) = 0x0 chan 5, offs 0x380 AtapiSetupLunPtrs for channel 5 of 8, 2 luns Chan 0xb71acc08 Lun 0x0 Lun ptr 0xb71afe50 Lun 0x1 Lun ptr 0xb71b0158 AtaReq 0xb71b7000: cmd aligned b71b7080, d=20 ahci_cmd_ptr 0xb71b7080 AtapiDmaAlloc: AHCI already initialized b71a0000 UniataAhciResume: lChan 5 WriteChannelPort4 0 => ch5[14] AHCI CLB setup WriteChannelPort4 9ea6000 => ch5[0] WriteChannelPort4 0 => ch5[4] AHCI RCV FIS setup WriteChannelPort4 9ea6400 => ch5[8] WriteChannelPort4 0 => ch5[c] WriteChannelPort4 10000006 => ch5[18] UniataAhciStartFR: lChan 5 ReadChannelPort4 ch5[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch5[18] UniataAhciStart: lChan 5 ReadChannelPort4 ch5[10] = 0 WriteChannelPort4 0 => ch5[10] SError 0x0, IS 0x0 ReadChannelPort4 ch5[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch5[18] AHCI port 5 Base: 0xf7810380 MemIo 1 Proc 0 AHCI5_0x0 (0xf7810380) = 0x9ea6000 AHCI5_0x4 (0xf7810384) = 0x0 AHCI5_0x8 (0xf7810388) = 0x9ea6400 AHCI5_0xc (0xf781038c) = 0x0 AHCI5_0x10 (0xf7810390) = 0x0 AHCI5_0x14 (0xf7810394) = 0x0 AHCI5_0x18 (0xf7810398) = 0x1000c017 AHCI5_0x1c (0xf781039c) = 0x0 AHCI5_0x20 (0xf78103a0) = 0x7f AHCI5_0x24 (0xf78103a4) = 0xffffffff AHCI5_0x28 (0xf78103a8) = 0x0 AHCI5_0x2c (0xf78103ac) = 0x0 AHCI5_0x30 (0xf78103b0) = 0x0 AHCI5_0x34 (0xf78103b4) = 0x0 AHCI5_0x38 (0xf78103b8) = 0x0 AHCI5_0x3c (0xf78103bc) = 0x0 chan 6, offs 0x400 AtapiSetupLunPtrs for channel 6 of 8, 2 luns Chan 0xb71ace70 Lun 0x0 Lun ptr 0xb71b0460 Lun 0x1 Lun ptr 0xb71b0768 AtaReq 0xb71b8000: cmd aligned b71b8080, d=20 ahci_cmd_ptr 0xb71b8080 AtapiDmaAlloc: AHCI already initialized b719e000 UniataAhciResume: lChan 6 WriteChannelPort4 0 => ch6[14] AHCI CLB setup WriteChannelPort4 9ea4000 => ch6 AHCI RCV FIS setup WriteChannelPort4 9ea4400 => ch6[8] WriteChannelPort4 0 => ch6[c] WriteChannelPort4 10000006 => ch6[18] UniataAhciStartFR: lChan 6 ReadChannelPort4 ch6[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch6[18] UniataAhciStart: lChan 6 ReadChannelPort4 ch6[10] = 0 WriteChannelPort4 0 => ch6[10] SError 0x0, IS 0x0 ReadChannelPort4 ch6[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch6[18] AHCI port 6 Base: 0xf7810400 MemIo 1 Proc 0 AHCI6_0x0 (0xf7810400) = 0x9ea4000 AHCI6_0x4 (0xf7810404) = 0x0 AHCI6_0x8 (0xf7810408) = 0x9ea4400 AHCI6_0xc (0xf781040c) = 0x0 AHCI6_0x10 (0xf7810410) = 0x0 AHCI6_0x14 (0xf7810414) = 0x0 AHCI6_0x18 (0xf7810418) = 0x1000c017 AHCI6_0x1c (0xf781041c) = 0x0 AHCI6_0x20 (0xf7810420) = 0x7f AHCI6_0x24 (0xf7810424) = 0xffffffff AHCI6_0x28 (0xf7810428) = 0x0 AHCI6_0x2c (0xf781042c) = 0x0 AHCI6_0x30 (0xf7810430) = 0x0 AHCI6_0x34 (0xf7810434) = 0x0 AHCI6_0x38 (0xf7810438) = 0x0 AHCI6_0x3c (0xf781043c) = 0x0 chan 7, offs 0x480 AtapiSetupLunPtrs for channel 7 of 8, 2 luns Chan 0xb71ad0d8 Lun 0x0 Lun ptr 0xb71b0a70 Lun 0x1 Lun ptr 0xb71b0d78 AtaReq 0xb71b9000: cmd aligned b71b9080, d=20 ahci_cmd_ptr 0xb71b9080 AtapiDmaAlloc: AHCI alrhciResume: lChan 7 WriteChannel] WriteChannelPort4 0 => ch7[4] AHCI RCV FIS setup WriteChannelPort4 9ea2400 => ch7[8] WriteChannelPort4 0 => ch7[c] WriteChannelPort4 10000006 => ch7[18] UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChann4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0x0 AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x50 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x0 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiChipInit: dev 0xffffffff, ph chan 0, c 0 HwFlags: 0x12000000 VendorID/DeviceID/Rev 0x1b4b/0x9123/0x11 AHCI single channel init UniataAhciReset: lChan 0 WriteChannelPort4 0 => ch0[14] UniataAhciHardReset: lChan 0 UniataAhciStop: lChan 0 ReadChannelPort4 ch0[18] = 1000c017 WriteChannelPort4 1000c016 => ch0[18] ReadChannelPort4 ch0[18] = 1000c016 ReadChannelPort4 ch0[18] = 10004016 final CMD 0x10004016 UniataSataPhyEnable: SControl 0x0 UniataSataPhyEnable: retry init 0 SControl 00000001 UniataSataPhyEnable: retry idle 0 SControl 00000300 UniataSataConnect: SATA TransferMode 0xus 0x50 UniataAhciWaitReady: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 TFD 0x50 AHCI port 0 Base: 0xf7810100 MemIo 1 Proc 0 AHCI0_0x0 (0xf7810100) = 0x9eb0000 AHCI0_0x4 (0xf7810104) = 0x0 AHCI0_0x8 (0xf7810108) = 0x9eb0400 AHCI0_0xc (0xf781010c) = 0x0 AHCI0_0x10 (0xf7810110) = 0x0 AHCI0_0x14 (0xf7810114) = 0x0 AHCI0_0x18 (0xf7810118) = 0x10004016 AHCI0_0x1c (0xf781011c) = 0x0 AHCI0_0x20 (0xf7810120) = 0x50 AHCI0_0x24 (0xf7810124) = 0x101 AHCI0_0x28 (0xf7810128) = 0x133 AHCI0_0x2c (0xf781012c) = 0x300 AHCI0_0x30 (0xf7810130) = 0x0 AHCI0_0x34 (0xf7810134) = 0x0 AHCI0_0x38 (0xf7810138) = 0x0 AHCI0_0x3c (0xf781013c) = 0x0 ReadChannelPort4 ch0[24] = 101 sig: 0x101 UniataAhciStart: lChan 0 ReadChannelPort4 ch0[10] = 0 WriteChannelPort4 0 => ch0[10] SError 0x0, IS 0x0 ReadChannelPort4 ch0[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch0[18] WriteChannelPort4 f900003f => ch0[14] UniataAhciSoftReset: lChan 0 UniataAhciStop: lChan 0 ReadChannelPort4 ch0[18] = 1000c017 WriteChannelPort4 1000c016 => ch0[18] ReadChannelPort4 ch0[18] = 1000c016 ReadChannelPort4 ch0[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 0 ReadChannelPort4 ch0[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch0[18] ReadChannelPort4 ch0[18] = 10004006 ReadChannelPort4 ch0[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 0 UniataAhciStartFR: lChan 0 ReadChannelPort4 ch0[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch0[18] UniataAhciStart: lChan 0 ReadChannelPort4 ch0[10] = 0 WriteChannelPort4 0 => ch0[10] SError 0x0, IS 0x0 ReadChannelPort4 ch0[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch0[18] UniataAhciSendCommand: lChan 0 WriteChannelPort4 1 => ch0[38] ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[10] = 1 CI 0x1 ReadChannelPort4 ch0[10] = 1 IS 0x1 WriteChannelPort4 1 => ch0[10] UniataAhciSendCommand: lChan 0 WriteChannelPort4 1 => ch0[38] ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[10] = 1 CI 0x1 ReadChannelPort4 ch0[10] = 1 IS 0x1 WriteChannelPort4 1 => ch0[10] UniataAhciWaitReady: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 34 40 50 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 signature 0x0 ATA dev FindDevices: AtapiDisableInterrupts_0: 0 WriteChannelPort4 0 => ch0[14] max_ldev 1 CheckDevice: Device 0x0 SStatus 133 AHCI check ReadChannelPort4 ch0[24] = 101 AHCI HDD at home CheckDevice: reset AHCI dev UniataAhciSoftReset: lChan 0 UniataAhciStop: lChan 0 ReadChannelPort4 ch0[18] = 1000c017 WriteChannelPort4 1000c016 => ch0[18] ReadChannelPort4 ch0[18] = 1000c016 ReadChannelPort4 ch0[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 0 ReadChannelPort4 ch0[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch0[18] ReadChannelPort4 ch0[18] = 10004006 ReadChannelPort4 ch0[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 0 UniataAhciStartFR: lChan 0 ReadChannelPort4 ch0[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch0[18] UniataAhciStart: lChan 0 ReadChannelPort4 ch0[10] = 0 WriteChannelPort4 0 => ch0[10] SError 0x0, IS 0x0 ReadChannelPort4 ch0[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch0[18] UniataAhciSendCommand: lChan 0 WriteChannelPort4 1 => ch0[38] ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[10] = 1 CI 0x1 ReadChannelPort4 ch0[10] = 1 IS 0x1 WriteChannelPort4 1 => ch0[10] UniataAhciSendCommand: lChan 0 WriteChannelPort4 1 => ch0[38] ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[10] = 1 CI 0x1 ReadChannelPort4 ch0[10] = 1 IS 0x1 WriteChannelPort4 1 => ch0[10] UniataAhciWaitReady: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 34 40 50 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 IssueIdentify: Checking for IDE. Status (0x50) UniataAhciSendPIOCommand: cntrlr 0x2:0x0 dev 0x0, cmd 0xec, lba 0x0 bcount 0x0 feature 0x0, buff 0xb74132f8, len 0x200, WF 0x2 length/DEV_BSIZE != bcount BuildAhciInternalSrb: lChan 0 [0x0] Srb 0xb7413e00, AtaReq 0xb71b2000, CMD 0xb71b2080 ph 0 AHCI setup FIS b71b2080, ch 0, dev 0 27 80 ec 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 assume IN AtapiDmaSetup: mode 0x49, data b74132f8, count 200, lCh 0, dev 0 get Phys(AHCI_CMD=b71b2080) get Phys(data[0]=b74132f8) set TERM ph data[0]=0:a1192f8 (1ff) AtapiDmaSetup: OK UniataAhciBeginTransaction: lChan 0, AtaReq 0xb71b2000 AHCI AtaReq CMD 0xb71b2080 (ph 0x9eb8080) prd_length 0x1, flags 0x5, base 9eb8080 ReadChannelPort4 ch0[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch0[38] ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[10] = 1 CI 0x1 ReadChannelPort4 ch0[10] = 1 IS 0x1 WriteChannelPort4 1 => ch0[10] UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadnelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000133 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 IssueIdentify: Status after read words 0x50 Model: CO-ZEVTRXE 4 FW: .1 5 S/N: CO-Z7NJHNFJHS68F1J4J Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 14 SATA support: 16, CAPs 0x10e OrigTransferMode: 49, Active: 49 Accoustic 0, cur 0 AdvPowerMode 0, cur 0 CHS 0x3fff:0x10:0x3f NumOfSectors 0xfbfc10 NumberOfCylinders == 0x3fff cylinders 0x3c915 NumOfSectors 0xee7c2b0 SupportLba flag 0x1 MajorRevision 0x3c0 UserAddressableSectors 0xee7c2b0 LBA mode Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x2:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 (ahci) UniataAhciSendPIOCommand: cntrlr 0x2:0x0 dev 0x0, cmd 0x27, lba 0x0 bcount 0x0 feature 0x0, buff 0x0, len 0x0, WF 0x3 BuildAhciInternalSrb: lChan 0 [0x0] Srb 0xb7413e00, AtaReq 0xb71b2000, CMD 0xb71b2080 ph 9eb8080 AHCI setup FIS b71b2080, ch 0, dev 0 27 80 27 00 00 00 00 e0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 0, AtaReq 0xb71b2000 AHCI AtaReq CMD 0xb71b2080 (ph 0x9eb8080) prd_length 0x0, flags 0x5, base 9eb8080 ReadChannelPort4 ch0[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch0[38] ReadChannelPort4 ch0[381 CI 0x1 ReadChannelPort4 ch0[10] = 1 IS 0x1 WriteChannelPort4 1 => ch0[10] UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannel4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000000000, ACT=00000000 AHCI: complete mask 0x1 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 NativeNumOfSectors 0xee7c2af requested LunExt->GeomType=ffffffff tmp_cylinders = 0x3c915 Use GEOM_STD, CHS=3cce/ff/3f Geometry: C 0x3cce (0x3cce) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb71ae000 S/N:OCZ-VERTEX4_____________________________-OCZ-N7HJFNHJ6SF8J1J4 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x50) CheckDevice: detected AHCI Device 0x0 CheckDevice: check status: found AtapiEnableInterrupts_0: 1 WriteChannelPort4 fd4000ff => ch0[14] FindDevices: returning 1 (AHCI) AtapiHwInitialize: lChannel 0x0, dev 0 AtapiDisableInterrupts_0: 0 WriteChannelPort4 0 => ch0[14] AtapiHwInitialize: IDE branch UniataAhciSendPIOCommand: cntrlr 0x2:0x0 dev 0x0, cmd 0xc6, lba 0x0 bcount 0x0 feature 0x0, buff 0x0, len 0x0, WF 0x8 BuildAhciInternalSrb: lChan 0 [0x0] Srb 0xb7413e00, AtaReq 0xb71b2000, CMD 0xb71b2080 ph 9eb8080 AHCI setup FIS b71b2080, ch 0, dev 0 27 80 c6 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 0, AtaReq 0xb71b2000 AHCI AtaReq CMD 0xb71b2080 (ph 0x9eb8080) prd_length 0x0, flags 0x5, base 9eb8080 ReadChannelPort4 ch0[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch0[38] ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[10] = 1 CI 0x1 ReadChannelPort4 ch0[10] = 1 IS 0x1 WriteChannelPort4 1 => ch0[10] UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000133 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 0 Try Enable Read Cache UniataAhciSendPIOCommand: cntrlr 0x2:0x0 dev 0x0, cmd 0xef, lba 0x0 bcount 0x0 feature 0xaa, buff 0x0, len 0x0, WF 0x8 BuildAhciInternalSrb: lChan 0 [0x0] Srb 0xb7413e00, AtaReq 0xb71b2000, CMD 0xb71b2080 ph 9eb8080 AHCI setup FIS b71b2080, ch 0, dev 0 27 80 ef aa 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 0, AtaReq 0xb71b2000 AHCI AtaReq CMD 0xb71b2080 (ph 0x9eb8080) prd_length 0x0, flags 0x5, base 9eb8080 ReadChannelPort4 ch0[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch0[38] ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[10] = 1 CI 0x1 ReadChannelPort4 ch0[10] = 1 IS 0x1 WriteChannelPort4 1 => ch0[10] UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000133 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 Try Enable Write Cache UniataAhciSendPIOCommand: cntrlr 0x2:0x0 dev 0x0, cmd 0xef, lba 0x0 bcount 0x0 feature 0x2, buff 0x0, len 0x0, WF 0x8 BuildAhciInternalSrb: lChan 0 [0x0] Srb 0xb7413e00, AtaReq 0xb71b2000, CMD 0xb71b2080 ph 9eb8080 AHCI setup FIS b71b2080, ch 0, dev 0 27 80 ef 02 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 0, AtaReq 0xb71b2000 AHCI AtaReq CMD 0xb71b2080 (ph 0x9eb8080) prd_length 0x0, flags 0x5, base 9eb8080 ReadChannelPort4 ch0[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch0[38] ReadChannelPort4 ch0[38] = 1 0x1 ReadChannelPort4 ch0[10] = 1 IS 0x1 WriteChannelPort4 1 => ch0[10] UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000133 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 Try Enable Adv. Power Mgmt UniataAhciSendPIOCommand: cntrlr 0x2:0x0 dev 0x0, cmd 0xef, lba 0x0 bcount 0x80 feature 0x5, buff 0x0, len 0x0, WF 0x8 length/DEV_BSIZE != bcount BuildAhciInternalSrb: lChan 0 [0x0] Srb 0xb7413e00, AtaReq 0xb71b2000, CMD 0xb71b2080 ph 9eb8080 AHCI setup FIS b71b2080, ch 0, dev 0 27 80 ef 05 00 00 00 a0 00 00 00 00 80 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 0, AtaReq 0xb71b2000 AHCI AtaReq CMD 0xb71b2080 (ph 0x9eb8080) prd_length 0x0, flags 0x5, base 9eb8080 ReadChannelPort4 ch0[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch0[38] ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[10] = 40000001 CI 0x1 ReadChannelPort4 ch0[10] = 40000001 IS 0x40000001 WriteChannelPort4 40000001 => ch0[10] UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 40000001 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 40000001 => ch0[10] AHCI: is=40000001 ss=00000133 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf7810100 MemIo 1 Proc 0 AHCI0_0x0 (0xf7810100) = 0x9eb0000 AHCI0_0x4 (0xf7810104) = 0x0 AHCI0_0x8 (0xf7810108) = 0x9eb0400 AHCI0_0xc (0xf781010c) = 0x0 AHCI0_0x10 (0xf7810110) = 0x40000001 AHCI0_0x14 (0xf7810114) = 0x0 AHCI0_0x18 (0xf7810118) = 0x1000c017 AHCI0_0x1c (0xf781011c) = 0x0 AHCI0_0x20 (0xf7810120) = 0x451 AHCI0_0x24 (0xf7810124) = 0x101 AHCI0_0x28 (0xf7810128) = 0x133 AHCI0_0x2c (0xf781012c) = 0x300 AHCI0_0x30 (0xf7810130) = 0x0 AHCI0_0x34 (0xf7810134) = 0x0 AHCI0_0x38 (0xf7810138) = 0x1 AHCI0_0x3c (0xf781013c) = 0x0 AHCI: unexpected, error UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x51, error 0x4 AHCI port 0 Base: 0xf7810100 MemIo 1 Proc 0 AHCI0_0x0 (0xf7810100) = 0x9eb0000 AHCI0_0x4 (0xf7810104) = 0x0 AHCI0_0x8 (0xf7810108) = 0x9eb0400 AHCI0_0xc (0xf781010c) = 0x0 AHCI0_0x10 (0xf7810110) = 0x40000001 AHCI0_0x14 (0xf7810114) = 0x0 AHCI0_0x18 (0xf7810118) = 0x1000c017 AHCI0_0x1c (0xf781011c) = 0x0 AHCI0_0x20 (0xf7810120) = 0x451 AHCI0_0x24 (0xf7810124) = 0x101 AHCI0_0x28 (0xf781012c) = 0x300 AHCI0_0x30 (0xf7810130) = 0x0 AHCI0_0x34 (0xf7810134) = 0x0 AHCI0_0x38 (0xf7810138) = 0x1 AHCI0_0x3c (0xf781013c) = 0x0 UniataAhciStop: lChan 0 ReadChannelPort4 ch0[18] = 1000c017 WriteChannelPort4 1000c016 => ch0[18] ReadChannelPort4 ch0[18] = 1000c016 ReadChannelPort4 ch0[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 0 ReadChannelPort4 ch0[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch0[18] ReadChannelPort4 ch0[18] = 10004006 ReadChannelPort4 ch0[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 0 UniataAhciStartFR: lChan 0 ReadChannelPort4 ch0[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch0[18] UniataAhciStart: lChan 0 ReadChannelPort4 ch0[10] = 40000001 WriteChannelPort4 40000001 => ch0[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch0[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch0[18] AHCI port 0 Base: 0xf7810100 MemIo 1 Proc 0 AHCI0_0x0 (0xf7810100) = 0x9eb0000 AHCI0_0x4 (0xf7810104) = 0x0 AHCI0_0x8 (0xf7810108) = 0x9eb0400 AHCI0_0xc (0xf781010c) = 0x0 AHCI0_0x10 (0xf7810110) = 0x0 AHCI0_0x14 (0xf7810114) = 0x0 AHCI0_0x18 (0xf7810118) = 0x1000c017 AHCI0_0x1c (0xf781011c) = 0x0 AHCI0_0x20 (0xf7810120) = 0x451 AHCI0_0x24 (0xf7810124) = 0x101 AHCI0_0x28 (0xf7810128) = 0x133 AHCI0_0x2c (0xf781012c) = 0x300 AHCI0_0x30 (0xf7810130) = 0x0 AHCI0_0x34 (0xf7810134) = 0x0 AHCI0_0x38 (0xf7810138) = 0x0 AHCI0_0x3c (0xf781013c) = 0x0 try mode 0x49 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x49 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 IDE_STATUS_ERROR detected on entry, statusByte = 0x51 SATA Generic LunExt->LimitedTransferMode 49, LunExt->OrigTransferMode 49 AtaSetTransferMode: Set 0x49 on Device 0/0 AtapiDisableInterrupts_0: 1 WriteChannelPort4 0 => ch0[14] UniataAhciSendPIOCommand: cntrlr 0x2:0x0 dev 0x0, cmd 0xef, lba 0x0 bcount 0x46 feature 0x3, buff 0x0, len 0x0, WF 0x8 length/DEV_BSIZE != bcount BuildAhciInternalSrb: lChan 0 [0x0] Srb 0xb7413e00, AtaReq 0xb71b2000, CMD 0xb71b2080 ph 9eb8080 AHCI setup FIS b71b2080, ch 0, dev 0 27 80 ef 03 00 00 00 a0 00 00 00 00 46 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 0, AtaReq 0xb71b2000 AHCI AtaReq CMD 0xb71b2080 (ph 0x9eb8080) prd_length 0x0, flags 0x5, base 9eb8080 ReadChannelPort4 ch0[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch0[38] ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[10] = 1 CI 0x1 ReadChannelPort4 ch0[10] = 1 IS 0x1 WriteChannelPort4 1 => ch0[10] UniataAhciStatus ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000133 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiEna AtapiEnableInterrupts_0: 1 WriteChannelPort4 fd4000ff => ch0[14] AtapiHwInitialize: lChannel 0x0, dev 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x12000000 VendorID/DeviceID/Rev 0x1b4b/0x9123/0x11 AHCI single channel init UniataAhc=> ch1[14] UniataAhciHardReset: lChan 1 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 1000c017 WriteChannelPort4 1000c016 => ch1[18] ReadChannelPort4 ch1[18] = 1000c016 ReadChannelPort4 ch1[18] = 10004016 final CMD 0x10004016 UniataSataPhyEnable: SControl 0x0 UniataSataPhyEnable: retry init 0 SControl 00000001 UniataSataPhyEnable: retry idle 0 SControl 00000300 UniataSataConnect: UniataSataConnect: SStatus 00000000 no PHY No devices in all LUNs WriteChannelPort4 80400040 => ch1[14] FindDevices: AtapiDisableInterrupts_1: 0 WriteChannelPort4 0 => ch1[14] max_ldev 1 CheckDevice: Device 0x0 SStatus 0 SATA DET <= SStatus_DET_Dev_NoPhy AtapiEnableInterrupts_1: 1 WriteChannelPort4 fd4000ff => ch1[14] FindDeviceslize: lChannel 0x1, dev 0 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiChipInit: dev 0xffffffff, ph chan 2, c 2 HwFlags: 0x12000000 VendorID/DeviceID/Rev 0x1b4b/0x9123/0x11 AHCI single channel init UniataAhciReset: lChan 2 WriteChannelPort4 0 => ch2[14] UniataAhciHardReset: lChan 2 UniataAhciStop: lChan 2 ReadChannelPort4 ch2[18] = 1000c017 WriteChannelPort4 1000c016 => ch2[18] ReadChannelPort4 ch2[18] = 1000c016 ReadChannelPort4 ch2[18] = 10004016 final CMD 0x10004016 UniataSataPhyEnable: SControl 0x0 UniataSataPhyEnable: retry init 0 SControl 00000001 UniataSataPhyEnable: retry idle 0 SControl 00000300 UniataSataConnect: 00 no PHY No devices in all LUNs WriteChannelPort4 80400040 => ch2[14] FindDevices: AtapiDisableInterrupts_2: 0 WriteChannelPort4 0 => ch2[14] max_tatus 0 SATA DET <= SStatus_DET_Dev_NoPhy AtapiEnableInterrupts_2: 1 WriteChannelPort4 fd4000ff => ch2[14] FindDevices: returning 0 (AHCI) AtapiHwInitialize: lChannel 0x2, dev 0 AtapiHwInitialize: lChannel 0x2, dev 1 AtapiChipInit: dev 0xffffffff, ph chan 3, c 3 HwFlags: 0x12000000 VendorID/DeviceID/Rev 0x1b4b/0x9123/0x11 AHCI single channel init UniataAhciReset: lChan 3 WriteChannelPort4 0 => ch3[14] UniataAhciHardReset: lChan 3 UniataAhciStop: lChan 3 ReadChannelPort4 ch3[18] = 1000c017 WriteChannelPort4 1000c016 => ch3[18] ReadChannelPort4 ch3[18] = 1000c016 ReadChannelPort4 ch3[18] = 10004016 final CMD 0x10004016 UniataSataPhyEnable: SControl 0x0 UniataSataPhyEnable: retry init 0 SControl 00000001 UniataSataPhyEnable: retry idle 0 SControl 00000300 UniataSataConnect: UniataSataConnect: SStatus 00000000 no PHY No devices in all LUNs WriteChannelPort4 80400040 => ch3[14] FindDevices: AtapiDisableInterrupts_3: 0 Writedev 1 CheckDevice: Device 0x0 SStatus 0 SATA DET <= SStatus_DET_Dev_NoPhy AtapiEnableInterrupts_3: 1 WriteChannelPort4 fd4000ff => ch3[14] FindDevices: returning 0 (AHCI) AtapiHwInitialize: lChannel 0x3, dev 0 AtapiHwInitialize: lChannel 0x3, dev 1 AtapiChipInit: dev 0xffffffff, ph chan 4, c 4 HwFlags: 0x12000000 VendorID/DeviceID/Rev 0x1b4b/0x9123/0x11 AHCI single channel init UniataAhciReset: lChan 4 WriteChannelPort4 0 => ch4[14] UniataAhciHardReset: lChan 4 UniataAhciStop: lChan 4 ReadChannelPort4 ch4[18] = 1000c017 WriteChannelPort4 1000c016 => ch4[18] ReadChannelPort4 ch4[18] = 1000c016 ReadChannelPort4 ch4[18] = 10004016 final CMD 0x10004016 UniataSataPhyEnable: SControl 0x0 UniataSataPhyEnable: retry init 0 SControl 00000001 UniataSataPhyEnable: retry idle 0 SControl 00000300 UniataSataConnect: UniataSataConnect: SStatus 00000000 no PHY No devices in all LUNs WriteChannelPort4 80400DisableInterrupts_4: 0 WriteChannelPort4 0 => ch4[14] max_ldev 1 CheckDevice: Device 0x0 SStatus 0 SATA DET <= SStatus_DET_Dev_NoPhy AtapiEnableInterrupts_4: 1 WriteChannelPort4 fd4000ff => ch4[14] FindDevices: returning 0 (AHCI) AtapiHwInitialize: lChannel 0x4, dev 0 AtapiHwInitialize: lChannel 0x4, dev 1 AtapiChipInit: dev 0xffffffff, ph chan 5, c 5 HwFlags: 0x12000000 VendorID/DeviceID/Rev 0x1b4b/0x9123/0x11 AHCI single channel init UniataAhciReset: lChan 5 WriteChannelPort4 0 => ch5[14] UniataAhciHardReset: lChaChannelPort4 ch5[18] = 1000c017 WriteChannelPort4 1000c016 => ch5[18] ReadChannelPort4 ch5[18] = 1000c016 ReadChannelPort4 ch5[18] = 10004016 final CMD 0x10004016 UniataSataPhyEnable: SControl 0x0 UniataSataPhyEnable: retry init 0 SControl 00000001 UniataSataPhyEnable: retry idle 0 SControl 00000300 UniataSataConnect: UniataSataConnect: SStatus 00000000 no PHY No devices in all LUNs WriteChannelPort4 80400040 => ch5[14] FindDevices: AtapiDisableInterrupts_5: 0 WriteChannelPort4 0 => ch5[14] max_ldev 1 CheckDevice: Device 0x0 SStatus 0 SATA DET <= SStatus_DET_Dev_NoPhy AtapiEnableInterrupts_5: 1 WriteChannelPort4 fd4000ff => ch5[14] FindDevicesalize: lChannel 0x5, dev 0 AtapiHwInitialize: lChannel 0x5, dev 1 AtapiChipInit: dev 0xffffffff, ph chan 6, c 6 HwFlags: 0x12000000 VendorID/DeviceID/Rev 0x1b4b/0x9123/0x11 AHCI single channel init UniataAhciReset: lChan 6 WriteChannelPort4 0 => ch6[14] UniataAhciHardReset: lChan 6 UniataAhciStop: lChan 6 ReadChannelPort4 ch6[18] = 1000c017 WriteChannelPort4 1000c016 => ch6[18] ReadChannelPort4 ch6[18] = 1000c016 ReadChannelPort4 ch6[18] = 10004016 final CMD 0x10004016 UniataSataPhyEnable: SControl 0x0 UniataSataPhyEnable: retry init 0 SControl 00000001 UniataSataPhyEnable: retry idle 0 SControl 00000300 UniataSataConnect: UniataSataConnect: SStatus 00000000 no PHY No devices in all LUNs WriteChannelPort4 80400040 => ch6[14] FindDevices: AtapiDisableInterrupts_6: 0 WriteChannelPort4 0 => ch6[14] max_ldev 1 CheckDevice: Device 0x0 SStatus 0 SATA DET <= SStatus_DET_Dev_NoPhy AtapiEnableInterrupts_6: 1 WriteChannelPort4 fd4000ff => ch6[14] FindDevices: returning 0 (AHCI) AtapiHwInitialize: lChannel 0x6, dev 0 AtapiHwInitialize: lChannel 0x6, d, ph chan 7, c 7 HwFlags: 0x12000000 VendorID/DeviceID/Rev 0x1b4b/0x9123/0x11 AHCI single channel init UniataAhciReset: lChan 7 WriteChannelPort4 0 => ch7[14] UniataAhciHardReset: lChan 7 UniataAhciStop: lChan 7 Re WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataSataPhyEnable: SControl 0x0 UniataSataPhyEnable: retry init 0 SControl 00000001 UniataSataPhyEnable: retry idle 0 SControl 00000300 UniataSataConnect: SATA TransferMode 0x47 UniataSataConnect: OK, ATA status 0x50 UniataAhciWaitReady: lChan 7 ReadChannelPort4 ch7[20] = 50 TFD 0x50 TFD 0x50 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0x0 AHCI7_0x18 (0xf7810498) = 0x10004016 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x50 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 ReadChannelPort4 ch7[24] = eb140101 sig: 0xeb140101 UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] WriteChannelPort4 f900003f => ch7[14] UniataAhciSoftReset: lChan 7 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] UniataAhciSendCommand: lChan 7 WriteChannelPort4 1 => ch7[38] ReadChannelPort4 ch7[38] CI 0x1 ReadChannelPort4 ch7[10] = 1 IS 0x1 WriteChannelPort4 1 => ch7[10] UniataAhciSendCommand: lChan 7 WriteChannelPort4 1 => ch7[38] ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[10] = 1 CI 0x1 ReadChannelPort4 ch7[10] = 1 IS 0x1 WriteChannelPort4 1 => ch7[10] UniataAhciWaitReady: lChan 7 ReadChannelPort4 ch7[20] = 50 TFD 0x50 34 40 50 00 00 00 00 a0 00 00 00 00 46 00 00 00 00 00 00 00 signature 0x46 ATA dev FindDevices: AtapiDisableInterrupts_7: 0 WriteChannelPort4 0 => ch7[14] max_ldev 1 CheckDevice: Device 0x0 SStatus 113 AHCI check ReadChannelPort4 ch7[24] = eb140101 ATAPI at home CheckDevice: reset AHCI dev UniataAhciSoftReset: lChan 7 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0,10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] UniataAhciSendCommand: lChan ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[10] = 1 CI 0x1 ReadChannelPort4 ch7[10] = 1 IS 0x1 WriteChannelPort4 1 => ch7[10] UniataAhciSendCommand: lChan 7 WriteChannelPort4 1 => ch7[38] ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[10] = 1 CI 0x1 ReadChannelPort4 ch7[10] = 1 IS 0x1 WriteChannelPort4 1 => ch7[10] UniataAhciWaitReady: lChan 7 ReadChannelPort4 ch7[20] = 50 TFD 0x50 34 40 50 00 00 00 00 a0 00 00 00 00 46 00 00 00 00 00 00 00 IssueIdentify: Checking for IDE. Status (0x50) UniataAhciSendPIOCommand: cntrlr 0x2:0x7 dev 0x0, cmd 0xec, lba 0x0 bcount 0x0 feature 0x0, buff 0xb74132f8, len 0x200, WF 0x2 length/DEV_BSIZE != bcount BuildAhciInternalSrb: lChan 7 [0x0] Srb 0xb7413fc0, AtaReq 0xb71b9000, CMD 0xb71b9080 ph 0 AHCI setup FIS b71b9080, ch 7, dev 0 27 80 ec 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 assume IN AtapiDmaSetup: mode 0x47, data b74132f8, count 200, lCh 7, dev 0 get Phys(AHCI_CMD=b71b9080) get Phys(data[0]=b74132f8) set TERM ph data[0]=0:a1192f8 (1ff) AtapiDmaSetup: OK UniataAhciBeginTransaction: lChan 7, AtaReq 0xb71b9000 AHCI AtaReq CMD 0xb71b9080 (ph 0x9ebf080) prd_length 0x1, flags 0x5, base 9ebf080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[10] = 40000001 CI 0x1 ReadChannelPort4 ch7[10] = 40000001 IS 0x40000001 WriteChannelPort4 40000001 => ch7[10] UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0x0 AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x51, error 0x4 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0x0 AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lC0000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0x0 AHCI7_0x18 (0xf7810498) = 0x) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 IssueIdentify: Status after read words 0x50 Model: CO-ZEVTRXE 4 FW: .1 5 S/N: CO-Z7NJHNFJHS68F1J4J Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 14 SATA support: 16, CAPs 0x10e OrigTransferMode: 49, Active: 49 Accoustic 0, cur 0 AdvPowerMode 0, cur 0 CHS 0x3cce:0xff:0x3f NumOfSectors 0xee7bb4e SupportLba flag 0x1 MajorRevision 0x3c0 UserAddressableSectors 0xee7c2b0 LBA mode LBA48 cylinders 0x3cce NativeNumOfSectors 0xee7bb4e Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x2:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 (ahci) UniataAhciSendPIOCommand: cntrlr 0x2:0x7 dev 0x0, cmd 0x27, lba 0x0 bcount 0x0 feature 0x0, buff 0x0, len 0x0, WF 0x3 BuildAhciInternalSrb: lChan 7 [0x0] Srb 0xb7413fc0, AtaReq 0xb71b9000, CMD 0xb71b9080 ph 9ebf080 AHCI setup FIS b71b9080, ch 7, dev 0 27 80 27 00 00 00 00 e0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 7, AtaReq 0xb71b9000 AHCI AtaReq CMD 0xb71b9080 (ph 0x9ebf080) prd_length 0x0, flags 0x5, base 9ebf080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[10] = 40000001 CI 0x1 ReadChannelPort4 ch7[10] = 40000001 IS 0x40000001 WriteChannelPort4 40000001 => ch7[10] UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0x0 AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x51, error 0x4 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0x0 AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0x0 AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 NativeNumOfSectors 0x14eb01 requested LunExt->GeomType=ffffffff tmp_cylinders = 0x3cce Geometry: C 0x3cce (0x3cce) Geometry: H 0xff (0xff) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb71b0a70 S/N:OCZ-VERTEX4_____________________________-OCZ-N7HJFNHJ6SF8J1J4 IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x51) CheckDevice: detected AHCI Device 0x0 CheckDevice: check status: found AtapiEnableInterrupts_7: 1 WriteChannelPort4 fd4000ff => ch7[14] iHwInitialize: lChannel 0x7, dev 0 AtapiDisableInterrupts_7: 0 WriteChannelPort4 0 => ch7[14] AtapiHwInitialize: IDE branch UniataAhciSendPIOCommand: cntrlr 0x2:0x7 dev 0x0, cmd 0xc6, lba 0x0 bcount 0x0 feature 0x0, buff 0x0, len 0x0, WF 0x8 BuildAhciInternalSrb: lChan 7 [0x0] Srb 0xb7413fc0, AtaReq 0xb71b9000, CMD 0xb71b9080 ph 9ebf080 AHCI setup FIS b71b9080, ch 7, dev 0 27 80 c6 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 7, AtaReq 0xb71b9000 AHCI AtaReq CMD 0xb71b9080 (ph 0x9ebf080) prd_length 0x0, flags 0x5, base 9ebf080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] ReadPort4 ch7[10] = 40000001 CI 0x1 ReadChannelPort4 ch7[10] = 40000001 IS 0x40000001 WriteChannelPort4 40000001 => ch7[10] UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0x0 AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x51, error 0x4 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0x0 AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0x0 AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c= 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 0 Try Enable Read Cache UniataAhciSendPIOCommand: cntrlr 0x2:0x7 dev 0x0, cmd 0xef, lba 0x0 bcount 0x0 feature 0xaa, buff 0x0, len 0x0, WF 0x8 BuildAhciInternalSrb: lChan 7 [0x0] Srb 0xb7413fc0, AtaReq 0xb71b9000, CMD 0xb71b9080 ph 9ebf080 AHCI setup FIS b71b9080, ch 7, dev 0 27 80 ef aa 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 7, AtaReq 0xb71b9000 AHCI AtaReq CMD 0xb71b9080 (ph 0x9ebf080) prd_length 0x0, flags 0x5, base 9ebf080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[10] = 1 CI 0x1 ReadChannelPort4 ch7[10] = 1 IS 0x1 WriteChannelPort4 1 => ch7[10] UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 450 TFD 0x450 ReadChannelPoch7[38] = 0 Try Enable Write Cache UniataAhciSendPIOCommand: cntrlr 0x2:0x7 dev 0x0, cmd 0xef, lba 0x0 bcount 0x0 feature 0x2, buff 0x0, len 0x0, WF 0x8 BuildAhciInternalSrb: lChan 7 [0x0] Srb 0xb7413fc0, AtaReq 0xb71b9000, CMD 0xb71b9080 ph 9ebf080 AHCI setup FIS b71b9080, ch 7, dev 0 27 80 ef 02 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 7, AtaReq 0xb71b9000 AHCI AtaReq CMD 0xb71b9080 (ph 0x9ebf080) prd_length 0x0, flags 0x5, base 9ebf080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[10] = 1 CI 0x1 ReadChannelPort4 ch7[10] = 1 IS 0x1 WriteChannelPor-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 450 TFD 0x450 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 0 Try Enable Adv. Power Mgmt UniataAhciSendPIOCommand: cntrlr 0x2:0x7 dev 0x0, cmd 0xef, lba 0x0 bcount 0x80 feature 0x5, buff 0x0, len 0x0, WF 0x8 length/DEV_BSIZE != bcount BuildAhciInternalSrb: lChan 7 [0x0] Srb 0xb7413fc0, AtaReq 0xb71b9000, CMD 0xb71b9080 ph 9ebf080 AHCI setup FIS b71b9080, ch 7, dev 0 27 80 ef 05 00 00 00 a0 00 00 00 00 80 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 7, AtaReq 0xb71b9000 AHCI AtaReq CMD 0xb71b9080 (ph 0x9ebf080) prd_length 0x0, flags 0x5, base 9ebf080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[10] = 1 CI 0x1 ReadChannelPort4 ch7[10] = 1 IS 0x1 WriteChannelPort4 1 => ch7[10] UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 450 TFD 0x450 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 0 try mode 0x49 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x49 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 49, LunExt->OrigTransferMode 49 AtaSetTransferMode: Set 0x49 on Device 7/0 AtapiDisableInterrupts_7: 1 WriteciSendPIOCommand: cntrlr 0x2:0x7 dev 0x0, cmd 0xef, lba 0x0 bcount 0x46 feature 0x3, buff 0x0, len 0x0, WF 0x8 length/DEV_BSIZE != bcount BuildAhciInternalSrb: lChan 7 [0x0] Srb 0xb7413fc0, AtaReq 0xb71b9000, CMD 0xb71b9080 ph 9ebf080 AHCI setup FIS b71b9080, ch 7, dev 0 27 80 ef 03 00 00 00 a0 00 00 00 00 46 00 00 80 00 00 00 00 ahciion: lChan 7, AtaReq 0xb71b9000 AHCI AtaReq CMD 0xb71b9080 (ph 0x9ebf080) prd_length 0x0, flags 0x5, base 9ebf080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[10] = 1 CI 0x1 ReadChannelPort4 ch7[10] = 1 IS 0x1 WriteChannelPort4 1 => ch7[10] UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 450 TFD 0x450 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 0 AtapiEnableInterrupts4000ff => ch7[14] AtapiHwInitialize: lChannel 0x7, dev 1 AtapiHwInitialize: (base) done TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xf7884f98, CDB 0xf7884fc8, AtaReq 0xb718b000, SCmd 0x12 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf7884f98 TopLevel (3), AtaReq 0xb718b000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7884c80 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_INQUIRY PATH:LUN:TID = 0x0:0x0:0x0 IdeSendCommand: SCSIOP_INQUIRY ok SStatus 133 AHCI check ReadChannelPort4 ch0[24] = 101 AHCI HDD at home RelativeAddressing IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf7884f98 complete with status 0x1 AtapiStartIo: AtapiDmaDBSync(b71ac000, f7884uest(b71ac000, f7884f98) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71ac000, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x1:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 AtapiStartIo: SRB rejected SRB_STATUS_b 0xf7884f98 complete with status 0xa AtapiStartIo: UniataRemoveRequest(0, f7884f98) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1 VendorID+DeviceID/Rev 0x91231b4b/0x11 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf7884f98 TopLevel (3), AtaReq 0xb718b000 SStatus 133 AHCI check ReadChannelPort4 ch0[24] = 101 AHCI HDD at home CheckDevice: Device 0x1 SStatus 133 AHCI check ReadChannelPort4 ch0[24] = 101 AHCI HDD at home CheckDevice: reset AHCI dev UniataAhciSoftReset: lChan 0 UniataAhciStop: lChan 0 ReadChannelPort4 ch0[18] = 1000c017 WriteChannelPort4 1000c016 => ch0[18] ReadChannelPort4 ch0[18] = 1000c016 ReadChannelPort4 ch0[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 0 ReadChannelPort4 ch0[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch0[18] ReadChannelPort4 ch0[18] = 10004006 ReadChannelPort4 ch0[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 0 UniataAhciStartFR: lChan 0 ReadChannelPort4 ch0[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch0[18] UniataAhciStart: lChan 0 ReadChannelPort4 ch0[10] = 0 WriteChannelPort4 0 => ch0[10] SError 0x0, IS 0x0 ReadChannelPort4 ch0[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch0[18] UniataAhciSendCommand: lChan 0 WriteChannelPort4 1 => ch0[38] ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[10] = 1 CI 0x1 ReadChannelPort4 ch0[10] = 1 IS 0x1 WriteChannelPort4 1 => ch0[10] UniataAhciSendCommand: lChan 0 WriteChannelPort4 1 => ch0[38] ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[10] = 1 CI 0x1 ReadChannelPort4 ch0[10] = 1 IS 0x1 WriteChannelPort4 1 => ch0[10] UniataAhciWaitReady: lChan 0 ReadChannelPort4 ch0[20] = 450 TFD 0x450 34 40 51 04 01 eb 14 00 00 00 00 00 01 00 00 00 00 00 00 00 CheckDevice: check status: not found ATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf7884f98 complete with status 0xa AtapiStartIo: AtatapiStartIo: UniataRemoveRequest(b71ac000, f7884f98) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71ac000, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next reqcntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 0) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x2 chan 0x0 unexpected, 1st chance AtapiInterrupt(base): cntrlr 0x2 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000133 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x2:0, irql 0x16, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 Unind to device 12 TopLevel (2), srb 0xf7884f98 TopLevel (3), AtaReq 0xb718b000 SStatus 0 SATA DET <= SStatus_DET_Dev_NoPhy AtapiStartIo: SRB rejected SRB_rtIo: Srb 0xf7884f98 complete with status 0xa AtapiStartIo: AtapiDmaDBSync(b71ac268, f7884f98) AtapiStartIo: UniataRemoveRequest(b71ac268, f7884f98) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71ac268, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x91231b4b/0x11 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf7884f98 TopLevel (3), AtaReq 0xb718b000 SStatus 0 SATA DET <= SStatus_DET_Dev_NoPhy AtaS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf7884f98 complete with ync(b71ac268, f7884f98) AtapiStartIo: UniataRemoveRequest(b71ac268, f7884f98) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71ac268, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf7884f98 TopLevel (3), AtaReq 0xb718b000 SStatus 0 SATA DET <= SStatus_DET_Dev_NoPhy AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf7884f98 complete with status 0xa AtapiStartIo: AtapiDmaDBSync(b71ac4d0, f7884f98) AtapiStartIo: UniataRemoveRequest(b71ac4d0, f7884f98) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71ac4d0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x0:0x1 VendorID+DeviceID/Rev 0x91231b4b/0x11 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf7884f98 TopLevel (3), AtaReq 0xb718b000 SStatus 0 SATA DET <= SStatus_DET_Dev_NoPhy AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf7884f98 complete with status 0xa AtapiStartIo: AtapiDmaDBSync(b71ac4d0, f7884f98) AtapiStartIo: UniataRemoveRequest(b71ac4d0, f7884f98) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71ac4d0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x3:0x0:0x0 VendorID+DeviceID/Rev 0x91TopLevel (2), srb 0xf7884f98 TopLevel (3), AtaReq 0xb718b000 SStatus 0 SATA DET <= SStatus_DET_Dev_NoPhy AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf7884f98 complete with status 0xa AtapiStartIo: AtapiDmaDBSync(b71ac738, f7884f98) AtapiStartIo: UniataRemoveRequest(b71ac738, f7884f98) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71ac738, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: querLUN:TID = 0x3:0x0:0x1 VendorID+DeviceID/Rev 0x91231b4b/0x11 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf7884f98 TopLevel (ATA DET <= SStatus_DET_Dev_NoPhyTATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf7884f98 complete with status 0xa AtapiStartIo: AtapiDmaDBSync(b71ac738, f7884f98) AtapiStartIo: UniataRemoveRequest(b71ac738, f7884f98) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71ac738, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x4:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf7884f98 TopLevel (3), AtaReq 0xb718b000 SStatus 0 SATA DET <= SStatus_DET_Dev_NoPhy AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf7884f98 complete with status 0xa AtapiStartIo: AtapiDmaDBSync(b71ac9a0, f7884f98) AtapiStartIo: UniataRemoveRequest(b71ac9a0, f7884f98) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71ac9a0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x4:0x0:0x1 VendorID+DeviceID/Rev 0x91231b4b/0x11 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf7884f98 TopLevel (3), AtaReq 0xb718b000 SStatus 0 SATA DET <= SStatus_DET_Dev_NoPhy AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf7884f98 complete with status 0xa AtapiStartIo: AtapiDmaDBSync(b71ac9a0, f7884f98) AtapiStartIo: UniataRemoveRequest(b71ac9a0, f7884f98) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71ac9a0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x5:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 08b000 SStatus 0 SATA DET <= SStatus_DET_Dev_NoPhy AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf7884f98 complete with status 0xa AtapiStartIo: AtapiDmaDBSync(b71acc08, f7884f98) AtapiStartIo: UniataRemoveRequest(b71acc08, f7884f98) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71acc08, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x5:0x0:0x1 VendorID+DeviceID/Rev 0x91231b4b/0x11 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf7884f98 TopLevel (3), AtaReq 0xb718b000 SStatus 0 SATA DET <= SStatus_DET_Dev_NoPhy AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf7884f98 complete with status 0xa AtapiStartIo: AtapiDmaDBSync(b71acc08, f7884f98) AtapiStartIo: UniataRemoveRequest(b71acc08, f7884f98) AtapiStartIo: ScsiPortNotification AtapiStartIoo: chan b71acc08, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x6:0x0:0x0 VendorID+DeviceID/Rev 0x91evel, qd=0 Send to device 12 TopLevel (2), srb 0xf7884f98 TopLevel (3), AtaReq 0xb718b000 SStatus 0 SATA DET <= SStatus_DET_Dev_NoPhy AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf7884f98 complete with status 0xa AtapiStartIo: AtapiDmaDBSync(b71ace70, f7884f98) AtapiStartIo: UniataRemoveRequest(b71ace70, f7884f98) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71ace70, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x6:0x0:0x1 VendorID+DeviceID/Rev 0x91231b4b/0x11 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf7884f98 TopLevel (3), AtaReq 0xb718b000 SStatus 0 SATA DET <= SStatus_DET_Dev_NoPhy AtapiStartIo: SRB rOUT AtapiStartIo: Srb 0xf7884f98 complete with status 0xa Atapf7884f98) AtapiStartIo: UniataRemoveRequest(b71ace70, f7884f98)n AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71ace70, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xf7884f98, CDB 0xf7884fc8, AtaReq 0xb718b000, SCmd 0x12 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf7884f98 TopLevel (3),** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7884c80 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_INQUIRY PATH:LUN:TID = 0x7:0x0:0x0 IdeSendCommand: SCSIOP_INQUIRY ok SStatus 113 AHCI check ReadChannelPort4 ch7[24] = eb140101 ATAPI at home RelativeAddressiFER_COMPLETE AtapiStartIo: Srb 0xf7884f98 complete with status 0x1 AtapiStartIo: AtapiDmaDBSync(b71ad0d8, f7884f98) AtapiStartIo: UniataRemoveRequest(b71ad0d8, f7884f98) AtapiStartIo: ScsiPortNotification AtapiStartIo: chan b71ad0d8, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLe, PATH:LUN:TID = 0x7:0x1:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUTplete with status 0xa AtapiStartIo: UniataRemoveRequest(0, f7884f98) AtapiStartIo: ScsiPortNotCurRequest AtapiStartIo: chan 0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x1 VendorID+DeviceID/Rev 0x91231b4b/0x11 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf7884f98 TopLevel (3), AtaReq 0xb718b000 SStatus 113 AHCI check ReadChannelPort4 ch7[24] = eb140101 ATAPI at home CheckDevice: Device 0x1 SStatus 113 AHCI check ReadChannelPort4 ch7[24] = eb140101 AHCI dev UniataAhciSoftReset: lChan 7 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] UniataAhciSendCommand: lChan 7 WriteChannelPort4 1 => ch7[38] ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[10] = 1 CI 0x1 ReadChannelPort4 ch7[10] = 1 IS 0x1 WriteChannelPort4 1 => ch7[10] UniataAhciSendCommand: lChan 7 WriteChannelPort4 1 => ch7[38] ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[10] = 1 CI 0x1 ReadChannelPort4 ch7[10] = 1 IS 0x1 WriteChannelPort4 1 => ch7[10] UniataAhciWaitReady: lChan 7 ReadChannelPort4 ch7[20] = 450 TFD 0x450 34 40 51 04 01 eb 14 00 00 00 00 00 01 00 00 00 00 00 00 00 CheckDevice: check status: not found AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf7884f98 complete with status 0xa AtapiStartIo: AtapiDmaDBSync(b71ad0d8, f7884f98) AtapiStartIo: UniataRemoveRequest(b71ad0d8, f7884f98) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71ad0d8, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x8:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 AtapiStartIo: Communication port INQUIRY AtapiStartIo: Srb 0xf7884f98 complete with status 0x1 AtapiStartIo: UniataRemoveRequest(0, f7884f98) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan 0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x8:0x1:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf7884f98 complete with status 0xa AtapiStartIo: UniataRemoveRequest(0, f7884f98) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan 0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request ScsiPortInitialize Status 0x0 Parameter IgnoreNativePci Parameter IgnoreNativePci = 0x0 Try init 1b4b 91a4 (hal/halx86/legacy/bussupp.c:1159) Slot assignment for 5 on bus 2 (hal/halx86/legacy/bus/pcibus.c:715) WARNING: PCI Slot Resource Assignment is FOOBAR UniataFindBusMasterController: Context=3, BMListLen=4 ConfigInfo->Length 8c bm_offset 0, channel 0 AdapterInterfaceType=0x5 IoBusNumber=0x2 slotNumber=0x20 busDataRead DevId = 91A41B4B Class = 0001/0001 Storage Class unknown UniataChipDetect: HwFlags: 0x0 Parameter ForceSimplex Parameter ForceSimplex = 0x0 i: 0xffffffff unknown dev, BM addr 0xd600 MaxTransferMode 0x10 UniataChipDetectChannels: allocate 2 Luns for 2 channels ForceSimplex = 0 HwFlags = 0 (0)HwFlags = 0 (1)HwFlags = 0 (2)found suitable device HwFlags = 0 (3)Range 0 = 0xda01 Range 1 = 0xd901 Range 2 = 0xd801 Range 3 = 0xd701 Range 4 = 0xd601 Range 5 = 0xfddfe000 IsBusMaster == TRUE AtapiGetIoRange: AtapiGetIoRange: rid 0x4, start 0xd600, offs 0x0, len 0x10, mem 0x0 AtapiGetIoRange: (2) 0xd600 BusMasterAddress (base): 0xd600 IsBusMaster == TRUE && !MasterDev BM statusByte = 60 AtapiReadChipConfig: devExt 0xb71882b4 AtapiReadChipConfig: dev 0x3, ph chan -1 Parameter ForceSimplex Parameter ForceSimplex = 0x0 MaxTransferMode (base): 0x10 Parameter MaxTransferMode Parameter MaxTransferMode = 0x10 MaxTransferMode (overriden): 0x10 Parameter MaxTransferMode Parameter MaxTransferMode = 0x10 MaxTransferMode (overriden): 0x10 Parameter AtapiDmaZeroTransfer Parameter AtapiDmaZeroTransfer = 0x0 Parameter AtapiDmaControlCmd Parameter AtapiDmaControlCmd = 0x0 Parameter AtapiDmaRawRead Parameter AtapiDmaRawRead = 0x1 ParAtapiDmaReadWrite = 0x1 AtapiChipInit: dev 0x3, ph chan -2, c -1 HwFlags: 0x0 VendorID/DeviceID/Rev 0x1b4b/0x91a4/0x11 AtapiChipInit: dev 0x3, ph chan 0, c 0 HwFlags: 0x0 VendorID/DeviceID/Rev 0x1b4b/0x91a4/0x11 UNIATA_NO80CHK AtapiChipInit: dev 0x3, ph chan 1, c 1 HwFlags: 0x1000000 VendorID/DeviceID/Rev 0x1b4b/0x91a4/0x11 UNIATA_NO80CHK simplexOnly = 0 (2)!MasterDev update ConfigInfo->nt4 using AtaReq sz 1000 update ConfigInfo->w2k: 64bit 0 chan[0] InterruptMode: 0, Level 11, Level2 0, Vector 11, Vector2 0 Reconstruct ConfigInfo set Dma32BitAddresses BMList[i].channel 0x0, NumberChannels 0x2, channel 0x0 de 0xb71882b4, Channel 0x0 chan = 0xb71888c8 AtapiSetupLunPtrs for channel 0 of 2, 2 luns Chan 0xb71888c8 Lun 0x0 Lun ptr 0xb7186000 Lun 0x1 Lun ptrevExt 0xb71882b4 AtapiReadChipConfig: dev 0x3, ph chan 0 ParaTransferMode = 0x10 MaxTransferMode (overriden): 0x10 Parameter ReorderEnable Parameter ReorderEnable = 0x1 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x10 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x10 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 Getting IO ranges !MasterDev mode IO range 1 0xda00 IO range 2 0xd902 IDX_IO1 0->da00(io) IDX_IO2 10->d902(io) IDX_BM_IO 14->d600(io) IDX_SATA_IO 19->0(io) AltStatus (0x0) Reg_0x1 (0xda01) = 0x0 Reg_0x2 (0xda02) = 0x0 Reg_0x3 (0xda03) = 0x0 Reg_0x4 (0xda04) = 0x0 Reg_0x5 (0xda05) = 0x0 Reg_0x6 (0xda06) = 0x0 Reg_0x7 (0xda07) = 0x0 BM_0x0 (0xd600) = 0x0 BM_0x1 (0xd601) = 0x0 BM_0x2 (0xd602) = 0x60 BM_0x3 (0xd603) = 0x0 clean IDE intr 0 cleatapiDmaAlloc: allocate tmp buffers below 4Gb de 0xb71882b4, Channel 0x1 chan = 0xb7188b30 AtapiSetupLunPtrs for channel 1 of 2, 2 luns Chan 0xb7188b30 Lun 0x0 Lun ptr 0xb7186610 Lun 0x1 Lun ptr 0xb7186918 AtapiReadChipConfig: devExt 0xb71882b4 AtapiReadChipConfig: dev 0x3, ph chan 1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x10 MaxTransferMode (overriden): 0x10 Parameter ReorderEnable Parameter ReorderEnable = 0x1 Parameter ReadCacheEnable Parameter ReadCacheEnnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x10 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x10 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 Getting IO ranges !MasterDev mode IO range 1 0xd800 IO range 2 0xd702 IDX_IO1 0->d800(io) IDX_IO2 10->d702(io) IDX_BM_IO 14->d608(io) IDX_SATA_IO 19->0(io) AltStatus (0x7f) Reg_0x1 (0xd801) = 0xff Reg_0x2 (0xd802) = 0xff Reg_0x3 (0xd803) = 0xff Reg_0x4 (0xd804) = 0xff Reg_0x5 (0xd805) = 0xff Reg_0x6 (0xd806) = 0x0 Reg_0x7 (0xd807) = 0x7f BM_0x0 (0xd608) = 0x0 BM_0x1 (0xd609) = 0x0 BM_0x2 (0xd60a) = 0x0 BM_0x3 (0xd60b) = 0x0 clean IDE intr 0 clean IDE intr 1 DMA status 0x0 AtapiDmaAlloc: allocate tmp buffers below 4Gb exit: init spinlock MasterDev=0x0, NumberChannels=0x2, Isr2DevObj=0x0 Init ISR: Multichannel native mode, go... Create DO DO name: len(38, 38), \Device\uniata3_2ch HalGetInterruptVector OrigAdapterInterfaceType=5 SystemIoBusNumber=2 BusInterruptLevel=11 BusInterruptVector=11 isr2_de 0xb74137b8 isr2_vector 0x3b isr2_irql 0x10 isr2_affinity 0x1 IoConnectInterrupt MasterDev=0x0, NumberChannels=0x2, Isr2DevObj=0xb7413700 final chan[2] InterruptMode: 0, Level 11, Level2 0, Vector 11, Vector2 0 return S (base) AtapiChipInit: dev 0xffffffff, ph chan -1, c -1 HwFlags: 0x1000000 VendorID/DeviceID/Rev 0x1b4b/0x91a4/0x11 AtapiChipInit: dev 0xffffffff, ph chan 0, c 0 HwFlags: 0x1000000 VendorID/DeviceID/Rev 0x1b4b/0x91a4/0x11 UNIATA_NO80CHK FindDevices: AtapiDisableInterrupts_0: 0 max_ldev 2 CheckDevice: Device 0x0 CheckDevice: reset dev AtapiSoftReset: statusByte2 0: DMA status 0x60 nobody home! 0x2a != 0xAA CheckDevice: DevtapiSoftReset: statusByte2 0: DMA status 0x60 nobody homets_0: 1 FindDevices: returning 0 AtapiHwInitialize: lChannel 0x0, dev 0 AtapiHwInitialize: lChannel 0x0, dev 1 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x1000000 VendorID/DeviceID/Rev 0x1b4b/0x91a4/0x11 UNIATA_NO80CHK FindDevices: AtapiDisableInterrupts_1: 0 max_ldev 2 CheckDevice: Device 0x0Reset: statusByte2 7f: DMA status 0x0 nobody home! 0xff != 0x55 CheckDevice: Device 0x1 CheckDevice: reset dev AtapiSoftReset: statusByte2 7f: DMA status 0x0 nobody home! 0xff != 0x55 AtapiEnableInterr AtapiHwInitialize: lChannel 0x1, dev 0 AtapiHwInitialize: lChannel 0x1, dev 1 AtapiHwInitialize: (base) done TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x91a41b4b/0x11 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf7884f98 TopLevel (3), AtaReq 0xb7133000 nobody home! 0x2a != 0xAA AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf7884f98 complete with status 0xa AtapiStartIo: AtapiDmaDBSync(b71888c8, f7884f98) AtapiStartIo: UniataRemoveRequest(b71888c8, f7884f98) AtapiStartIo: ScsiaGetCurRequest AtapiStartIo: chan b71888c8, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1 VendorID+DeviceID/Rev 0x91a41b4b/0x11 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf7884f98 TopLevel (3), AtaReq 0xb7133000 nobody home! 0x2a != 0xAA AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf7884f98 complete with status 0xa AtapiStartIo: AtapiDmaDBSync(b71888c8, f7884f98) AtapiStartIo: UniataRemoveRequest(b71888c8, f7884f98) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71888c8, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x91a41b4b/0x11 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf7884f98 TopLevel (3), AtaReq 0xb7133000 nobody home! 0xff != 0x55 AtapiStartIo: SRB rejecteapiStartIo: Srb 0xf7884f98 complete with status 0xa AtapiStartIo: AtapiDmaDBSync(b7188b30, f7884f98) AtapiStartIo: UniataRemoveRequest(b7188b30, f7884f98) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b7188b30, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1 VendorID+DeviceID/Rev 0x91a41b4b/0x11 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf7884f98 TopLevel (3), AtaReq 0xb7133000 nobody home! 0xff != 0x55 AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf7884f98 complete with status 0xa AtapiStartIo: AtapiDmaDBSync(b7188b30, f7884f98) AtapiStartIo: UniataRemoveRequest(b7188b30, f7884f98) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b7188b30, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x0:0x0 VendorID+DeviceID/Rev 0x91a41b4b/0x11 AtapiStartIo: Communication port INQUIRY AtapiStartIo: Srb 0xf7884f98 complete with status 0x1 AtapiStartIo: UniataRemoveRequest(0, f7884f98) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan 0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x1:0x0 VendorID+DeviceID/Rev 0x91a41b4b/0x11 AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srbxa AtapiStartIo: UniataRemoveRequest(0, f7884f98) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan 0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x0:0x1 VendorID+DeviceID/Rev 0x91a41b4b/0x11 AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf7884f98 complete with status 0xa AtapiStartIo: UniataRemoveRequest(0, f7884f98) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan 0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request ScsiPortInitialize Status 0x0 Parameter IgnoreIsa Parameter IgnoreIsa = 0x0 ATAPI IDE: Look for ISA Controllers AtapiFindController: assume max PIO4 allocate 2 Luns for 1 channels AtapiSetupLunPtrs for channel 0 of 1, 2 luns Chan 0xb712f008 Lun 0x0 Lun ptr 0xb7130008 Lun 0x1 Lun ptr 0xb7130310 AtapiReadChipConfig: devExt 0xb7164cf4 AtapiReadChipConfig: dev 0xffffffff, ph chan -1 Parameter ForceSimplex Parameter ForceSimplex = 0x0 MaxTransferMode (base): 0xc Parameter MaxTransferMode Parameter MaxTransferMode = 0xc MaxTransferMode (overriden): 0xc Parameter AtapiDmaZeroTransfer Parameter AtapiDmaZeroTransfer = 0x0 Parameter AtapiDmaControlCmd Parameter AtapiDmaControlCmd = 0x0 Parameter AtapiDmaRawRead Parameter AtapiDmaRawRead = 0x1 Parameter AtapiDmaReadWrite Parameter AtapiDmaReadWrite = 0x1 AtapiChipInit: dev 0xffffffff, ph chan -1, c -1 HwFlags: 0x0 VendorID/DeviceID/Rev 0x0/0x0/0x0 Parameter PortBase Parameter PortBase = 0x0 Parameter Irq Parameter Irq = 0x0 AtapiFindController: AtdiskPrimaryClaimed Parameter PortBase Parameter PortBase = 0x0 Parameter Irq Parameter Irq = 0x0 BaseIoAddress1=170 BaseIoAddress2=376 AltStatus (0xff) Reg_0x1 (0x171) = 0xff Reg_0x2 (0x172) = 0xff Reg_0x3 (0x173) = 0xff Reg_0x4 (0x174) = 0xff Reg_0x5 (0x175) = 0xff Reg_0x6 (0x176) = 0xff Reg_0x7 (0x177) = 0xff BM_0x0 (0x0) = 0xa0 BM_0x1 (0x0) = 0xa0 BM_0x2 (0x0) = 0xa0 BM_0x3 (0x0) = 0xa0 AtapiFindController: Identifier read back from Mastetifier read back from Slave (0xff) Parameter PortBase Parameter PortBase = 0x0 Parameter Irq Parameter Irq = 0x0 BaseIoAddress1=1e8 BaseIoAddress2=3ee AltStatus (0xff) Reg_0x1 (0x1e9) = 0xff Reg_0x2 (0x1ea) = 0xff Reg_0x3 (0x1eb) = 0xff Reg_0x4 (0x1ec) = 0xff Reg_0x5 (0x1ed) = 0xff Reg_0x6 (0x1ee) = 0xff Reg_0x7 (0x1ef) = 0xff BM_0x0 (0x0) = 0xa0 BM_0x1 (0x0) = 0xa0 BM_0x2 (0x0) = 0xa0 BM_0x3 (0x0) = 0xa0 AtapiFindController: Identifier read back from Master (0xff) AtapiFindController: Identifier read back from Slave (0xff) Parameter PortBase Parameter PortBase = 0x0 Parameter Irq Parameter Irq = 0x0 BaseIoAddress1=168 BaseIoAddress2=36e AltStatus (0xff) Reg_0x1 (0x169) = 0xff Reg_0x2 (0x16a) = 0xff Reg_0x3 (0x16b) = 0xff Reg_0x4 (0x16c) = 0xff Reg_0x5 (0x16d) = 0xff Reg_0x6 (0x16e) = 0xff Reg_0x7 (0x16f) = 0xff BM_0x0 (0x0) = 0xa0 BM_0x1 (0x0) = 0xa0 BM_0x2 (0x0) = 0xa0 BM_0x3 (0x0) = 0xa0 AtapiFindController: Identifier read back from Master (0xff) AtapiFindController: Identifier read back from Slave (0xff) AtapiFindController: return SP_RETURN_NOT_FOUND ScsiPortInitialize Status 0xc00000c0 Parameter IgnoreMca Parameter IgnoreMca = 0x0 ATAPI IDE: Look for MCA Controllers ScsiPortInitialize Status 0xc00000c0 Leave UNIATA MiniPort DriverEntry with status 0x0 '\Driver\BUSLOGIC' initialization failed, status (0xc00000c0) (ntoskrnl/io/iomgr/driver.c:61) Deleting driver object '\Driver\BUSLOGIC' TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x3:0x0:0x0 VendorID+DeviceID/Rev 0x43911002/0x0 SRB 0xf78852a4, CDB 0xf78852d4, AtaReq 0xb71ba000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78852a4 TopLevel (3), AtaReq 0xb71ba000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7885018 ** Ide: Command AtaReq 0xb71ba000 ** --- ** IdeSendCommand: SCSIOP_MODE_SENSE PATH:LUN:TID = 0x3:0x0:0x0 IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf78852a4 complete with status 0x6 AtapiStartIo: AtapiDmaDBSync(b71d1738, f78852a4) AtapiStartIo: UniataRemoveRequest(b71d1738, f78852a4) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71d1738, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x3:0x0:0x0 VendorID+DeviceID/Rev 0x43911002/0x0 SRB 0xf78852a4, CDB 0xf78852d4, AtaReq 0xb71ba000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78852a4 TopLevel (3), AtaReq 0xb71ba000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7885018 ** Ide: Command AtaReq 0xb71ba000 ** --- ** IdeSendCommand: SCSIOP_MODE_SENSE PATH:LUN:TID = 0x3:0x0:0x0 IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf78852a4 complete with status 0x6 AtapiStartIo: AtapiDmaDBSync(b71d1738, f78852a4) AtapiStartIo: UniataRemoveRequest(b71d1738, f78852a4) AtapiStartIo: ScsiPoetCurRequest AtapiStartIo: chan b71d1738, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel H:LUN:TID = 0x3:0x0:0x0 VendorID+DeviceID/Rev 0x43911002/0x0 SRB 0xf78852c8, CDB 0xf78852f8, AtaReq 0xb71ba000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78852c8 TopLevel (3), AtaReq 0xb71ba000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7885030 ** Ide: Command AtaReq 0xb71ba000 ** --- ** ** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x3:0x0:0x0 ** IDE disk 0x0 - #sectors 0x3f, #heads 0xff, #cylinders 0xed81 IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiSth status 0x1 AtapiStartIo: AtapiDmaDBSync(b71d1738, f78852c8) b71d1738, f78852c8) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71d1738, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x3:0x0:0x0 VendorID+DeviceID/Rev 0x43911002/0x0 SRB 0xb71fdf70, CDB 0xb71fdfa0, AtaReq 0xb71ba000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb71fdf70 TopLevel (3), AtaReq 0xb71ba000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7884f00 ** Ide: Command AtaReq 0xb71ba000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x3:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb71ba000: cmd aligned b71ba080, d=20 ahci_cmd_ptr 0xb71ba080 AtapiDmaSetup: mode 0x48, data f780f000, count 200, lCh 3, dev 0 get Phys(AHCI_CMD=b71ba080) get Phys(data[0]=f780f000) set TERM ph data[0]=0:9e36000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b71ba080, ch 3, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 3, AtaReq 0xb71ba000 AHCI AtaReq CMD 0xb71ba080 (ph 0x9ec0080) prd_length 0x1, flags 0x5, base 9ec0080 ReadChannelPort4 ch3[18] = 6017 CMD 0x6017 WriteChannelPort4 1 => ch3[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b71fdf70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=8 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x3 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(3-3): hIS 0x8 ReadChannelPort4 ch3[10] = 1 ReadChannelPort4 ch3[38] = 0 ReadChannelPort4 ch3[34] = 0 WriteChannelPort4 1 => ch3[10] AHCI: is=00000001 ss=00000123 serror=00000800 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:3, irql 0x11, c 3 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 3 ReadChannelPort4 ch3[20] = 50 TFD 0x50 ReadChannelPort4 ch3[34] = 0 ReadChannelPort4 ch3[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xbquestComplete, srb 0xb71fdf70 AtapiInterrupt: NextRequest, srb= AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=8 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x3 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(3-3): hIS 0x8 ReadChannelPort4 ch3[10] = 0 ReadChannelPort4 ch3[38] = 0 ReadChannelPort4 ch3[34] = 0 WriteChannelPort4 0 => ch3[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:3, irql 0x11, c 3 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x3:0x0:0x0 VendorID+DeviceID/Rev 0x43911002/0x0 SRB 0xb71fdf70, CDB 0xb71fdfa0, AtaReq 0xb71ba000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb71fdf70 TopLevel (3), AtaReq 0xb71ba000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7884e10 ** Ide: Command AtaReq 0xb71ba000 _READ PATH:LUN:TID = 0x3:0x0:0x0 IdeReadWrite (Orig REQ): Start100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb71ba000: cmd aligned b71ba080, d=20 ahci_cmd_ptr 0xb71ba080 AtapiDmaSetup: mode 0x48, data f780f000, count 200, lCh 3, dev 0 get Phys(AHCI_CMD=b71ba080) get Phys(data[0]=f780f000) set TERM ph data[0]=0:9e36000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b71ba080, ch 3, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 3, AtaReq 0xb71ba000 AHCI AtaReq CMD 0xb71ba080 (ph 0x9ec0080) prd_length 0x1, flags 0x5, base 9ec0080 ReadChannelPort4 ch3[18] = 6017 CMD 0x6017 WriteChannelPort4 1 => ch3[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b71fdf70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=8 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x3 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(3-3): hIS 0x8 ReadChaort4 ch3[38] = 0 ReadChannelPort4 ch3[34] = 0 WriteChannelPort4 1 => ch3[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:3, irql 0x11, c 3 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 3 ReadChannelPort4 ch3[20] = 50 TFD 0x50 ReadChannelPort4 ch3[34] = 0 ReadChannelPort4 ch3[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrut: set AutoSense AtapiInterrupt: remove srb 0xb71fdf70, status 1 AtapiInterrupt: RequestComplete, srb 0xb71fdf70 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=8 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x3 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(3-3): hIS 0x8 ReadChannelPort4 ch3[10] = 0 ReadChannelPort4 ch3[38] = 0 ReadChannelPort4 ch3[34] = 0 WriteChannelPort4 0 => ch3[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:3, irql 0x11, c 3 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return statusth status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x3:0x0:0x0 VendorID+DeviceID/Rev 0x43911002/0x0 SRB 0xf7884f48, CDB 0xf7884f78, AtaReq 0xb71ba000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf7884f48 TopLevel (3), AtaReq 0xb71ba000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command d AtaReq 0xb71ba000 ** --- ** ** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x3:0x0:0x0 ** IDE disk 0x0 - #sectors 0x3f, #heads 0xff, #cylinders 0xed81 IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: s 0x1 AtapiStartIo: AtapiDmaDBSync(b71d1738, f7884f48) AtapiStartIo: UniataRemoveRequest(b71d1738, f7884f48) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71d1738, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x3:0x0:0x0 VendorID+DeviceID/Rev 0x43911002/0x0 SRB 0xb71fdf70, CDB 0xb71fdfa0, AtaReq 0xb71ba000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb71fdf70 TopLevel (3), AtaReq 0xb71ba000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7884e78 ** Ide: Command AtaReq 0xb71ba000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x3:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb71ba000: cmd aligned b71ba080, d=20 ahci_cmd_ptr 0xb71ba080 AtapiDmaSetup: mode 0x48, data f780f188, count 200, lCh 3, dev 0 get Phys(AHCI_CMD=b71ba080) get Phys(data[0]=f780f188) set TERM ph data[0]=0:9e35188 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b71ba080, ch 3, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 3, AtaReq 0xb71ba000 AHCI AtaReq CMD 0xb71ba080 (ph 0x9ec0080) prd_length 0x1, flags 0x5, base 9ec0080 ReadChannelPort4 ch3[18] = 6017 CMD 0x6017 WriteChannelPort4 1 => ch3[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b71fdf70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=8 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x3 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(3-3): hIS 0x8 ReadChannelPort4 ch3[10] = 1 ReadChannelPort4 ch3[38] = 0 ReadChannelPort4 ch3[34] = 0 WriteChannelPort4 1 => ch3[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:3, irql 0x11, c 3 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 3 ReadChannelPort4 ch3[20] = 50 TFD 0x50 ReadChannelPort4 ch3[34] = 0 ReadChannelPort4 ch with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reasransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb71fdf70, status 1 AtapiInterrupt: RequestComplete, srb 0xb71fdf70 AtapiInterrupt: t: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x43911002/0x0 (ex 1) Atalr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x3 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(3-3): hIS 0x8 ReadChannelPort4 ch3[10] = 0 ReadChannelPort4 ch3[38] = 0 ReadChannelPort4=> ch3[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:3, irql 0x11, c 3 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(barrupt(base): exit with status 0x1 (ntoskrnl/fstub/disksup.c:1709) FSTUB: MaxSector now = 892876635 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x3:0x0:0x0 VendorID+DeviceID/Rev 0x43911002/0x0 SRB 0xb71fdf70, CDB 0xb71fdfa0, AtaReq 0xb71ba000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb71fdf70 TopLevel (3), AtaReq 0xb71ba000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7884e78 ** Ide: Command AtaReq 0xb71ba000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x3:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 50014e6, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 50014e6, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb71ba000: cmd aligned b71ba080, d=20 ahci_cmd_ptr 0xb71ba080 AtapiDmaSetup: mode 0x48, data f780f188, count 200, lCh 3, dev 0 get Phys(AHCI_CMD=b71ba080) get Phys(data[0]=f780f188) set TERM ph data[0]=0:9e35188 (1ff) AtapiDmaSetup: 0 27 80 c8 00 e6 14 00 e5 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x50014e6, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 3, AtaReq 0xb71ba000 AHCI AtaReq CMD 0xb71ba080 (ph 0x9ec0080) prd_length 0x1, flags 0x5, base 9ec0080 ReadChannelPort4 ch3[18] = 6017 CMD 0x6017 WriCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b71fdf70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=8 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x3 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(3-3): hIS 0x8 ReadChannelPort4 ch3[10] = 1 ReadChannelPort4 ch3[38] = 0 ReadChannelPort4 ch3[34] = 0 WriteChannelPort4 1 => ch3[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:3, irql 0x11, c 3 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 3 ReadChannelPort4 ch3[20] = 50 TFD 0x50 ReadChannelPort4 ch3[34] = 0 ReadChannelPort4 ch3[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb71fdf70, status 1 AtapiInterrupt: RequestComplete, srb 0xb71fdf70 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=8 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x3 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(3-3): hIS 0x8 ReadChannelPort4 ch3[10] = 0 ReadChannelPort4 ch3[38] = 0 ReadChaPort4 0 => ch3[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:3, irql 0x11, c 3 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (ntoskrnl/fstub/disksup.c:1709) FSTUB: MaxSector now = 444594177 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x3:0x0:0x0 VendorID+DeviceID/Rev 0x43911002/0x0 SRB 0xb71fdf70, CDB 0xb71fdfa0, AtaReq 0xb71ba000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb71fdf70 TopLevel (3), AtaReq 0xb71ba000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7884e78 ** Ide: Command AtaReq 0xb71ba000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x3:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 5001fff, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 5001fff, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb71ba000: cmd aligned b71ba080, d=20 ahci_cmd_ptr 0xb71ba080 AtapiDmaSetup: mode 0x48, data f780f188, count 200, lCh 3, dev 0 get Phys(AHCI_CMD=b71ba080) get Phys(data[0]=f780f188) set TERM ph data[0]=0:9e35188 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b71ba080, ch 3, dev 0 27 80 c8 00 ff 1f 00 e5 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x5001fff, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 3, AtaReq 0xb71ba000 AHCI AtaReq CMD 0xb71ba080 (ph 0x9ec0080) prd_length 0x1, flags 0x5, base 9ec0080 ReadChannelPort4 ch3[18] = 6017 CMD 0x6017 WriteChannelPort4 1 => ch3[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b71fdf70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=8 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x3 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(3-3): hIS 0x8 ReadChannelPort4 ch3[10] = 1 ReadChannelPort4 ch3[38] = 0 ReadChannelPort4 ch3[34] = 0 WriteChannelPort4 1 => ch3[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:3, irql 0x11, c 3 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 3 ReadChannelPort4 ch3[20] = 50 TFD 0x50 ReadChannelPort4 ch3[34] = 0 ReadChannelPort4 ch3[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiI AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestCompletAtapiInterrupt: remove srb 0xb71iInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=8 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x3 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(3-3): hIS 0x8 ReadChannelPort4 ch3[10] = 0 ReadChannelPort4 ch3[38] = 0 ReadChannelPort4 ch3[34] = 0 WriteChannelPort4 0 => ch3[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:3, irql 0x11, c 3 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (ntoskrnl/fstub/disksup.c:1055) FSTUB: entry is invalid (ntoskrnl/fstub/disksup.c:1056) FSTUB: offset 0x1a800b1a (ntoskrnl/fstub/disksup.c:1057) FSTUB: length 0x1ab82c41 (ntoskrnl/fstub/disksup.c:1058) FSTUB: end 0x3538375b (ntoskrnl/fstub/disksup.c:1059) FSTUB: max 0x1a7ff801 (ntoskrnl/fstub/disksup.c:1709) FSTUB: MaxSector now = 448277569 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x3:0x0:0x0 VendorID+DeviceID/Rev 0x43911002/0x0 SRB 0xb71fdf70, CDB 0xb71fdfa0, AtaReq 0xb71ba000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb71fdf70 TopLevel (3), AtaReq 0xb71ba000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7884e78 ** Ide: Command AtaReq 0xb71ba000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x3:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 1f802000, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 1f802000, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb71ba000: cmd aligned b71ba080, d=20 ahci_cmd_ptr 0xb71ba080 AtapiDmaSetup: mode 0x48, data f780f188, count 200, lCh 3, dev 0 get Phys(AHCI_CMD=b71ba080) get Phys(data[0]=f780f188) set TERM ph data[0]=0:9e35188 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b71ba080, ch 3, dev 0 27 80 25 00 00 20 80 e0 1f 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x1f802000, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 3, AtaReq 0xb71ba000 AHCI AtaReq CMD 0xb71ba080 (ph 0x9ec0080) prd_length 0x1, flags 0x5, base 9ec0080 ReadChannelPort4 ch3[18] = 6017 CMD 0x6017 WriteChannelPort4 1 => ch3[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b71fdf70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=8 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x3 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(3-3): hIS 0x8 ReadChannelPort4 ch3[10] = 1 ReadChannelPort4 ch3[38] = 0 ReadChannelPort4 ch3[34] = 0 WriteChannelPort4 1 => ch3[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:3, irql 0x11, c 3 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 3 ReadChannelPort4 ch3[20] = 50 T= 0 ReadChannelPort4 ch3[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb71fdf70, status 1 AtapiInterrupt: RequestComplete, srb 0xb71fdf70 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=8 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x3 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(3-3): hIS 0x8 ReadChannelPort4 ch3[10] = 0 ReadChannelPort4 ch3[38] = 0 ReadChannelPort4 ch3[34] = 0 WriteChannelPort4 0 => ch3[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:3, irql 0x11, c 3 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x3:0x0:0x0 VendorID+DeviceID/Rev 0x43911002/0x0 SRB 0xb71fdf70, CDB 0xb71fdfa0, AtaReq 0xb71ba000, SCmd 0x28 Unind to device 28 TopLevel (2), srb 0xb71fdf70 TopLevel (3), AtaReq 0xb71ba000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7884e88 ** Ide: Command AtaReq 0xb71ba000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x3:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb71ba000: cmd aligned b71ba080, d=20 ahci_cmd_ptr 0xb71ba080 AtapiDmaSetup: mode 0x48, data f780f000, count 200, lCh 3, dev 0 get Phys(AHCI_CMD=b71ba080) get Phys(data[0]=f780f000) set TERM ph data[0]=0:9e36000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b71ba080, ch 3, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 3, AtaReq 0xb71ba000 AHCI AtaReq CMD 0xb71ba080 (ph 0x9ec0080) prd_length 0x1, flags 0x5, base 9ec0080 ReadChannelPort4 ch3[18] = 6017 CMD 0x6017 WriteChannelPort4 1 => ch3[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b71fdf70 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x43911002/0x0 (ex 2) AtapiInterrupt(base): AHCI: hIS=8 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x3 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(3-3): hIS 0x8 ReadChannelPort4 ch3[10] = 1 ReadChannelPort4 ch3[38] = 0 ReadChannelPort4 ch3[34] = 0 WriteChannelPort4 1 => ch3[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x1:3, irql 0x11, c 3 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 3 ReadChannelPort4 ch3[20] = 50 TFD 0x50 ReadChannelPort4 ch3[34] = 0 ReadChannelPort4 ch3[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb71fdf70, status 1 AtapiInterrupt: RequestComplete, srb 0xb71fdf70 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0 Intr: VendorID+DeviceID/Rev 0x43911002/0x0 (ex 1) AtapiInterrupt(base): AHCI: hIS=8 cntrlr 0x1 chan 0x0 AtapiInterrupt(base): cntrlr 0x1 chan 0x3 AtapiInterrupt(base): try l AtapiCheckInterrupt__: UniataAhciStatus(3-3): hIS 0x8 ReadChannelPort4 ch3[10] = 0 ReadChannelPort4 ch3[38] = 0 ReadChannelPort4 ch3[34] = 0 WriteChannelPort4 0 => ch3[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x1:3, irql 0x11, c 3 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInttapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xf78852a4, CDB 0xf78852d4, AtaReq 0xb718b000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78852a4 TopLevel (3), AtaReq 0xb718b000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7885018 ** Ide: Command AtaReq 0xb718b000 ** --- ** ITH:LUN:TID = 0x0:0x0:0x0 IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf78852a4 complete with status 0x6 AtapiStartIo: AtapiDmaDBSync(b71ac000, f78852a4) AtapiStartIo: UniataRemoveRequest(b71ac000, f78852a4) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71ac000, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xf78852a4, CDB 0xf78852d4, AtaReq 0xb718b000, SCmd qd=0 Send to device 1a TopLevel (2), srb 0xf78852a4 TopLevel (3), AtaReq 0xb718b000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7885018 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_MODE_SENSE PATH:LUN:TID = 0x0:0x0:0x0 IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf78852a4 complete with status 0x6 AtapiStartIo: AtapiDmaDBSync(b71ac000, f78852a4) AtapiStartIo: UniataRemoveRequest(b71ac000, f78852a4) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71ac000, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xf78852c8, CDB 0xf78852f8, AtaReq 0xb718b000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78852c8 TopLevel (3), AtaReq 0xb718b000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7885030 ** Ide: Command AtaReq 0xb718b000 ** --- ** ** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x0:0x0:0x0 ** IDE disk 0x0 - #sectors 0x3f, #heads 0xff, #cylinders 0x3cce IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf78852c8 complete with status 0x1 AtapiStartIo: AtapiDmaDBSync(b71ac000, f78852c8) AtapiStartIo: UniataRemoveRequest(b71ac000, f78852c8) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71ac000, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb712f550, CDB 0xb712f580, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb712f550 TopIDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7884f00 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: mode 0x49, data f780f000, count 200, lCh 0, dev 0 get Phys(AHCI_CMD=b718b080) get Phys(data[0]=f780f000) set TERM ph data[0]=0:9e34000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 0, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch0[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch0[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b712f550 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000133 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x2:0, irql 0x16, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiI AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb712f550, status 1 AtapiInterrupt: RequestComplete, srb 0xb712f550 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb712f550, CDB 0xb712f580, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb712f550 TopLevel (3), AtaReq 0xb718b000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7884e10 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: mode 0x49, data f780f000, count 200, lCh 0, dev 0 get Phys(AHCI_CMD=b718b080) get Phys(data[0]=f780f000) set TERM ph data[0]=0:9e34000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 0, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch0[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch0[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b712f550 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000133 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x2:0, irql 0x16, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: Cansfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb712f550, status 1 AtapiInterrupt: RequestComplete, srb 0xb712f550 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xf7884f48, CDB 0xf7884f78, AtaReq 0xb718b000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf7884f48 TopLevel (3), AtaReq 0xb718b000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7884cb0 ** Ide: Command AtaReq 0xb718b000 ** --- ** ** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x0:0x0:0x0 ** IDE disk 0x0 - #sectors 0x3f, #heads 0xff, #cylinders 0x3cce IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf7884f48 complete with status 0x1 AtapiStartIo: AtapiDmaDBSync(b71ac000, f7884f48) AtapiStartIo: UniataRemoveRequest(b71ac000, f7884f48) AtapiStartIo: ScsiPortNotification AtapiStarrtIo: chan b71ac000, Src 0 Atap query PORT for next request Tox0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb712f550, CDB 0xb712f580, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb712f550 TopLevel (3), AtaReq 0xb718b000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7884e78 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: mode 0x49, data f780f7a8, count 200, lCh 0, dev 0 get Phys(AHCI_CMD=b718b080) get Phys(data[0]=f780f7a8) set TERM ph data[0]=0:9e357a8 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 0, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 0, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch0[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch0[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b712f550 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000133 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x2:0, irql 0x16, c 0 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb712f550, status 1 AtapiInterrupt: RequestComplete, srb 0xb712f550 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xf78852a4, CDB 0xf78852d4, AtaReq 0xb718b000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78852a4 TopLevel (3), AtaReq 0xb718b000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7885018 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_MODE_SENSE PATH:LUN:TID = 0x7:0x0:0x0 IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf78852a4 complete with status 0x6 AtapiStartIo: AtapiDmaDBSync(b71ad0d8, f78852a4) AtapiStartIo: UniataRemoveRequest(b71ad0d8, f78852a4) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71ad0d8, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xf78852a4, CDB 0xf78852d4, AtaReq 0xb718b000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78852a4 TopLevel (3), AtaReq 0xb718b000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7885018 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_MODE_SENSE PATH:LUN:TID = 0x7:0x0:0x0 IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf78852a4 complete with status 0x6 AtapiStartIo: AtapiDmaDBSync(b71ad0d8, f78852a4) AtapiStartIo: UniataRemoveRequest(b71ad0d8, f78852a4) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xf78852c8, CDB 0xf78852f8, AtaReq 0xb718b000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78852c8 TopLevel (3), AtaReq 0xb718b000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7885030 ** Ide: Command AtaReq 0xb718b000 ** --- ** ** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x7:0x0:0x0 ** IDE disk 0x0 - #sectors 0x3f, #heads 0xff, #cylinders 0x3cce IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf78852c8 complete with status 0x1 AtapiStartIo: AtapiDmaDBSync(b71ad0d8, f78852c8) AtapiStartIo: UniataRemoveRequest(b71ad0d8, f78852c8) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b71ad0d8, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb7130440 TopLevel (3), AtaReq 0xb718b000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7884f00 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: mode 0x49, data f780f000, count 200, lCh 7, devget Phys(data[0]=f780f000) set TERM ph data[0]=0:9e33000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 2) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChlPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7884d60 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next reqIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInte hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] elPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7884d54 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b0000x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1t4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0hannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7884d48 ** Ide: Command AtaReq 0xb718b000 ** --- **:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sectorze 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080ries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci ioLba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 ndCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7884d3c ** Ide: Command AtaReq 0xb718b000 ** --- **N:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AH0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7884d30 ** Ide: Command AtaReq 0xb718b000 ** --- **N:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 t 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: l 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x4 IDE: Command abort AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 100 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb7130440, status 82 AtapiInterrupt: RequestComplete, srb 0xb7130440 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb7130440 TopLevel (3), AtaReq 0xb718b000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881c90 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: mode 0x49, data f780f000, count 200, lCh 7, dev 0 get Phys(AHCI_CMD=b718b080) get Phys(data[0]=f780f000) set TERM ph data[0]=0:9e33000 (1ff) AtapiDmaSetup AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 05: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 2) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 Re WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881af0 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0 = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChiataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ae4 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReWriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChandChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] Uniatt4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI:ase: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0x78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ad8 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask emIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881acc ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ):S 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xff78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI78 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ac0 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 Rfinal CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 Writert 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChanPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x4 IDE: Command abort AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 100 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb7130440, status 82 AtapiInterrupt: RequestComplete, srb 0xb7130440 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb7130440 TopLevel (3), AtaReq 0xb718b000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881c90 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: mode 0x49, data f780f000, count 200, lCh 7, dev 0 get Phys(AHCI_CMD=b718b080) get Phys(data[0]=f780f000) set TERM ph data[0]=0:9e33000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 2) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881af0 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhcan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ae4 ** Ide: CommIdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80annelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ad8 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, tarting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next bleIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0xcntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881acc ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUEstatus 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UlPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ac0 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand:d: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 CI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x4 IDE: Command abort AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 100 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb7130440, status 82 AtapiInterrupt: RequestComplete, srb 0xb713044x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb7130440 TopLevel (3), AtaReq 0xb718b000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881c90 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: mode 0x49, data f780f000, count 200, lCh 7, dev 0 get Phys(AHCI_CMD=b718b080) get Phys(data[0]=f780f000) set TERM ph data[0]=0:9e33000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 2) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTrt4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 6 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 4017 => ch7[18] ReadChannelPortelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881af0 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[ 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf781 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80hannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ae4 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciSto] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhc ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: l ReadChannelPort4 ch7[18] = 100nelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMhan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ad8 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return statuswith status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c ( lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannenelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18]annelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881acc ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR ApiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiI AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 Writport 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 H:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ac0 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 Re WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelhannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x4 IDE: Command abort MapError: ErrorCount >= MAX_ERRORS MapError: Disabling 32-bit PIO and Multi-sector IOs ScsiPortLogError: devExt 0xb74132b4, Srb 0xb7130440, P:T:D=7:0:0, MsgId 0x9 (4) (drivers/storage/scsiport/scsiport.c:1842) ScsiPortLogError() called (drivers/storage/scsiport/scsiport.c:1844) PathId: 0x07 TargetId: 0x00 Lun: 0x00 ErrorCode: 0x00000009 UniqueId: 0x00000004 UniataAhciSendPIOCommand: cntrlr 0x2:0x7 dev 0x0, cmd 0xc6, lba 0x0 bcount 0x0 feature 0x0, buff 0x0, len 0x0, WF 0x8 BuildAhciInternalSrb: lChan 7 [0x0] Srb 0xb7413fc0, AtaReq 0xb71b9000, CMD 0xb71b9080 ph 9ebf080 AHCI setup FIS b71b9080, ch 7, dev 0 27 80 c6 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 7, AtaReq 0xb71b9000 AHCI AtaReq CMD 0xb71b9080 (ph 0x9ebf080) prd_length 0x0, flags 0x5, base 9ebf080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[10] = 40000001 CI 0x1 ReadChannelPort4 ch7[10] = 40000001 IS 0x40000001 WriteChannelPort4 40000001 => ch7[10] UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_ (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 100elPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 100 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb7130440, status 82 AtapiInterrupt: RequestComplete, srb 0xb7130440 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b00opLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb7130440 TopLevel (3), AtaReq 0xb718b000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881c90 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: mode 0x49, data f780f000, count 200, lCh 7, dev 0 get Phys(AHCI_CMD=b718b080) get Phys(data[0]=f780f000) set TERM ph data[0]=0:9e33000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 2) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciS7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannehciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 Port4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 H:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881af0 ** Ide: Command AtaReq 0xb718b000 ** --- ** IN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0omplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelP => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ae4 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDx0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = T = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 Writet 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ad8 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd d to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881acc ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit wT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ac0 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: Returg, UseDpc=1, NoStartIo=1 AtapiItatus 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 errupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 RennelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf78488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x4 IDE: Command abort MapError: ErrorCount >= MAX_ERRORS MapError: Disabling 32-bit PIO and Multi-sector IOs ScsiPortLogError: devExt 0xb74132b4, Srb 0xb7130440, P:T:D=7:0:0, MsgId 0x9 (4) (drivers/storage/scsiport/scsiport.c:1842) ScsiPortLogError() called (drivers/storage/scsiport/scsiport.c:1844) PathId: 0x07 TargetId: 0x00 Lun: 0x00 ErrorCode: 0x00000009 UniqueId: 0x00000004 UniataAhciSendPIOCommand: cntrlr 0x2:0x7 dev 0x0, cmd 0xc6, lba 0x0 bcount 0x0 feature 0x0, buff 0x0, len 0x0, WF 0x8 BuildAhciInternalSrb: lChan 7 [0x0] Srb 0xb7413fc0, AtaReq 0xb71b9000, CMD 0xb71b9080 ph 9ebf080 AHCI setup FIS b71b9080, ch 7, dev 0 27 80 c6 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransact AHCI AtaReq CMD 0xb71b9080 (ph 0x9ebf080) prd_length 0x0, flags 0x5, base 9ebf080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[10] = 40000001 CI 0x1 ReadChannelPort4 ch7[10] = 40000001 IS 0x40000001 WriteChannelPort4 40000001 => ch7[10] UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x= 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) nderflow, AtaReq->WordsLeft 100 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb7130440, status 82 AtapiInterrupt: RequestComplete, srb 0xb7130440 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb7130440 TopLevel (3), AtaReq 0xb718b000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881c90 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: mode 0x49, data f780f000, count 200, lCh 7, dev 0 get Phys(AHCI_CMD=b718b080) get Phys(data[0]=f780f000) set TERM ph data[0]=0:9e33000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 2) AtapiInterrupt(base): AHCI: hIS=80 c(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 Read WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x80 ReadChannelPort4 ch7[10] = adChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881af0 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 31b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannellPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ae4 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 100040AhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ad8 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPorRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf78110484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChart4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lb Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881acc ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ac0 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPrt4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI78 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 hannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x4 IDE: Command abort MapError: ErrorCount >= MAX_ERRORS MapError: Disabling 32-bit PIO and Multi-sector IOs ScsiPortLogError: devExt 0xb74132b4, Srb 0xb7130440, P:T:D=7:0:0, MsgId 0x9 (4) (drivers/storage/scsiport/scsiport.c:1842) ScsiPortLogError() called (drivers/storage/scsiport/scsiport.c:1844) PathId: 0x07 TargetId: 0x00 Lun: 0x00 ErrorCode: 0x00000009 UniqueId: 0x00000004 UniataAhciSendPIOCommand: cntrlr 0x2:0x7 dev 0x0, cmd 0xc6, lba 0x0 bcount 0 0x8 BuildAhciInternalSrb: lChan 7 [0x0] Srb 0xb7413fc0, Atbf080 AHCI setup FIS b71b9080, ch 7, dev 0 27 80 c6 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 7, AtaReq 0xb71b9000 AHCI AtaReq CMD 0xb71b9080 (ph 0x9ebf080) prd_length 0x0, flags 0x5, base 9ebf080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[10] = 40000001 CI 0x1 ReadChannelPort4 ch7[10] = 40000001 IS 0x40000001 WriteChannelPort4 40000001 => ch7[10] UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 100 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb7130440, status 82 AtapiInterrupt: RequestComplete, srb 0xb7130440 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 31b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb7130440 TopLevel (3), AtaReq 0xb718b000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881c90 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: mode 0x49, data f780f000, count 200, lCh 7, dev 0 get Phys(AHCI_CMD=b718b080) get Phys(data[0]=f780f000) set TERM ph data[0]=0:9e33000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 2) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiIerrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: l0c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 * Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881af0 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: 0000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[h7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ae4 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ad8 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeRea 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 CI7_0x8 (0xf7810488) = 0x9ea2400HCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881acc ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand:: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERR0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 c4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ac0 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 0 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadnelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Berror Intr on DRQ 0 AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x4 IDE: Command abort MapError: ErrorCount >= MAX_ERRORS MapError: Disabling 32-bit PIO and Multi-sector IOs ScsiPortLogError: devExt 0xb74132b4, Srb 0xb7130440, P:T:D=7:0:0, MsgId 0x9 (4) (drivers/storage/scsiport/scsiport.c:1842) ScsiPortLogError() called (drivers/storage/scsiport/scsiport.c:1844) PathId: 0x07 TargetId: 0x00 Lun: 0x00 ErrorCode: 0x00000009 UniqueId: 0x00000004 UniataAhciSendPIOCommand: cntrlr 0x2:0x7 dev 0x0, cmd 0xc6, lba 0x0 bcount 0x0 feature 0x0, buff 0x0, len 0x0, WF 0x8 BuildAhciInternalSrb: lChan 7 [0x0] Srb 0xb7413fc0, AtaReq 0xb71b9000, CMD 0xb71b9080 ph 9ebf080 AHCI setup FIS b71b9080, ch 7, dev 0 27 80 c6 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 7, AtaReq 0xb71b9000 AHCI AtaReq CMD 0xb71b9080 (ph 0x9ebf080) prd_length 0x0, flags 0x5, base 9ebf080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[10] = 40000001 CI 0x1 ReadChannelPort4 ch7[10] = 40000001 IS 0x40000001 WriteChannelPort4 40000001 => ch7[10] UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x0 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 100 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb7130440, status 82 AtapiInterrupt: RequestComplete, srb 0xb7130440 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb7130440 TopLevel (3), AtaReq 0xb718b000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881c90 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: mode 0x49, data f780f000, count 200, lCh 7, dev 0 get Phys(AHCI_CMD=b718b080) get Phys(data[0]=f780f000) set TERM ph data[0]=0:9e33000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, MD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDICTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 2) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPortPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881af0 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PArite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 Atquest AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => c MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ae4 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ad8 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, ing sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881acc ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCh7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannel40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 CI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c= 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ac0 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciS[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x4 IDE: Command abort MapError: ErrorCount >= MAX_ERRORS MapError: Disabling 32-bit PIO and Multi-sector IOs ScsiPortLogError: devExt 0xb74132b4, Srb 0xb7130440, P:T:D=7:0:0, MsgId 0x9 (4) (drivers/storage/scsiport/scsiport.c:1842) ScsiPortLogError() called (drivers/storage/scsiport/scsiport.c:1844) PathId: 0x07 TargetId: 0x00 Lun: 0x00 ErrorCode: 0x00000009 UniqueId: 0x00000004 UniataAhciSendPIOCommand: cntrlr 0x2:0x7 dev 0x0, cmd 0xc6, lba 0x0 bcount 0x0 feature 0x0, buff 0x0, len 0xan 7 [0x0] Srb 0xb7413fc0, AtaReq 0xb71b9000, CMD 0xb71b9080 ph 9ebf080 AHCI setup FIS b71b9080, ch 7, dev 0 27 80 c6 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 7, AtaReq 0xb71b9000 AHCI AtaReq CMD 0xb71b9080 (ph 0x9, base 9ebf080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[10] = 40000001 CI 0x1 ReadChannelPort4 ch7[10] = 40000001 IS 0x40000001 WriteChannelPort4 40000001 => ch7[10] UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] =hannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lC10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 100 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb7130440, status 82 AtapiInterrupt: RequestComplete, srb 0xb7130440 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mas2:7, irql 0x16, c 7 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb7130440 TopLevel (3), AtaReq 0xb718b000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881c90 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Std 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: mode 0x49, data f780f000, count 200, lCh 7, dev 0 get Phys(AHCI_CMD=b718b080) get Phys(data[0]=f780f000) set TERM ph data[0]=0:9e33000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next recntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 2) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: co0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881af0 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ae4 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHC AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPorrt4 ch7[18] = 1000c016 ReadChanMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 Re CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ad8 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransac AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 Mem0) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command taReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next reqntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7nnelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ac0 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCL7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x4 IDE: Command abort MapError: ErrorCount >= MAX_ERRORS MapError: Disabling 32-bit PIO and Multi-sector IOs ScsiPortLogError: devExt 0xb74132b4, Srb 0xb7130440, P:T:D=7:0:0, MsgId 0x9 (4) (drivers/storage/scsiport/scsiport.c:1842) ScsiPortLogError() called (drivers/storage/scsiport/scsiport.c:1844) PathId: 0x07 TargetId: 0x00 Lun: 0x00 ErrorCode: 0x00000009 UniqueId: 0x00000004 UniataAhciSendPIOCommand: cntrlr 0x2:0x7 dev 0x0, cmd 0xc6, lba 0x0 bcount 0x0 feature 0x0, buff 0x0, len 0x0, WF 0x8 BuildAhciInternalSrb: lChan 7 [0x0] Srb 0xb7413fc0, AtaReq 0xb71b9000, CMD 0xb71b9080 ph 9ebf080 AHCI setup FIS b71b9080, ch 7, dev 0 27 80 c6 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 7, AtaReq 0xb71b9000 AHCI AtaReq CMD 0xb71b9080 (ph 0x9ebf080) prd_length 0x0, flags 0x5, base 9ebf080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[10] = 40000001 CI 0x1 ReadChannelPort4 ch7[10] = 40000001 IS 0x40000001 WriteChannelPort4 40000001 => ch7[10] UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[1hannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 100 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb7130440, status 82 AtapiInterrupt: RequestComplete, srb 0xb7130440 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb7130440 TopLevel (3), AtaReq 0xb718b000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881c90 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: mode 0x49, data f780f000, count 200, lCh 7, dev 0 get Phys(AHCI_CMD=b718b080) get Phys(data[0]=f780f000) set TERM ph data[0]=0:9e33000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 2) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881af0 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ae4 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfetate = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 I7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ad8 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sectze 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881acc ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ):RDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ac0 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPorB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 Atauest AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiIntert(base): locked AtapiCheckInterx80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 chort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x4 IDE: Command abort MapError: ErrorCount >= MAX_ERRORS MapError: Disabling 32-bit PIO and Multi-sector IOs ScsiPortLogError: devExt 0xb74132b4, Srb 0xb7130440, P:T:D=7:0:0, MsgId 0x9 (4) (drivers/storage/scsiport/scsiport.c:1842) ScsiPortLogError() called (drivers/storage/scsiport/scsiport.c:1844) PathId: 0x07 TargetId: 0x00 Lun: 0x00 ErrorCode: 0x00000009 UniqueId: 0x00000004 UniataAhciSendPIOCommand: cntrlr 0x2:0x7 dev 0x0, cmd 0xc6, lba 0x0 bcount 0x0 feature 0x0, buff 0x0, len 0x0, WF 0x8 BuildAhciInternalSrb: lChan 7 [0x0] Srb 0xb7413fc0, AtaReq 0xb71b9000, CMD 0xb71b9080 ph 9ebf080 AHCI setup FIS b71b9080, ch 7, dev 0 27 80 c6 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 7, AtaReq 0xb71b9000 AHCI AtaReq CMD 0xb71b9080 (ph 0x9ebf080) prd_length 0x0, flags 0x5, base 9ebf080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[10] = 40000001 CI 0x1 ReadChannelPort4 ch7[10] = 40000001 IS 0x40000001 WriteChannelPort4 40000001 => ch7[10] UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 100 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb7130440, status 82 AtapiInterrupt: RequestComplete, srb 0xb7130440 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb7130440 TopLevel (3), AtaReq 0xb718b000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881c90 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: mode 0x49, data f780f000, count 200, lCh 7, dev 0 get Phys(AHCI_CMD=b718b080) get Phys(data[0]=f780f33000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 2) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] R ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881af0 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ae4 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransac AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ad8 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ):RDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommandtIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = hannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881acc ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 Read WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ac0 ** Ide: Command AtaReq 0xb718b000 ** --- **UN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exitingpt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 8] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x4 IDE: Command abort MapError: ErrorCount >= MAX_ERRORS MapError: Disabling 32-bit PIO and Multi-sector IOs ScsiPortLogError: devExt 0xb74132b4, Srb 0xb7130440, P:T:D=7:0:0, MsgId 0x9 (4) (drivers/storage/scsiport/scsiport.c:1842) ScsiPortLogError() called (drivers/storage/scsiport/scsiport.c:1844) PathId: 0x07 TargetId: 0x00 Lun: 0x00 ErrorCode: 0x00000009 UniqueId: 0x00000004 UniataAhciSendPIOCommand: cntrlr 0x2:0x7 dev 0x0, cmd 0xc6, lba 0x0 bcount 0x0 feature 0x0, buff 0x0, len 0x0, WF 0x8 BuildAhciInternalSrb: lChan 7 [0x0] Srb 0xb7413fc0, AtaReq 0xb71b9000, CMD 0xb71b9080 ph 9ebf080 AHCI setup FIS b71b9080, ch 7, dev 0 27 80 c6 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 7, AtaReq 0xb71b9000 AHCI AtaReq CMD 0xb71b9080 (ph 0x9ebf080) prd_length 0x0, flags 0x5, base 9ebf080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[10] = 40000001 CI 0x1 ReadChannelPort4 ch7[10] = 40000001 IS 0x40000001 WriteChannelPort4 40000001 => ch7[10] UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 100 AtapiInterrupt: RequestCb 0xb7130440, status 82 AtapiInterrupt: RequestComplete, srb 0xb7130440 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterpiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb7130440 TopLevel (3), AtaReq 0xb718b000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881c90 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: mode 0x49, data f780f000, count 200, lCh 7, dev 0 get Phys(AHCI_CMD=b718b080) get Phys(data[0]=f780f000) 0 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query upt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 2) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0emIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0xemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881af0 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80annelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ae4 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, tarting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 HCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 c4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ad8 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c 0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI70x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881acc ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapikInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd nd to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ac0 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x4 IDE: Command abort MapError: ErrorCount >= MAX_ERRORS MapError: Disabling 32-bit PIO and Multi-sector IOs ScsiPortLogError: devExt 0xb74132b4, Srb 0xb7130440, P:T:D=7:0:0, MsgId 0x9 (4) (drivers/storage/scsiport/scsiport.c:1842) ScsiPortLogError() called (drivers/storage/scsiport/scsiport.c:1844) PathId: 0x07 TargetId: 0x00 Lun: 0x00 ErrorCode: 0x00000009 UniqueId: 0x00000004 UniataAhciSendPIOCommand: cntrlr 0x2:0x7 dev 0x0, cmd 0xc6, lba 0x0 bcount 0x0 feature 0x0, buff 0x0, len 0x0, WF 0x8 BuildAhciInternalSrb: lChan 7 [0x0] Srb 0xb7413fc0, AtaReq 0xb71b9000, CMD 0xb71b9080 ph 9ebf080 AHCI setup FIS b71b9080, ch 7, dev 0 27 80 c6 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 7, AtaReq 0xb71b9000 AHCI AtaReq CMD 0xb71b9080 (ph 0x9ebf080) prd_length 0x0, flags 0x5, base 9ebf080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[10] = 40000001 CI 0x1 ReadChannelPort4 ch7[10] = 40000001 IS 0x40000001 WriteChannelPort4 40000001 => ch7[10] UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 00000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ab0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChanl CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 100 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb7130440, status 82 AtapiInterrupt: RequestComplete, srb 0xb7130440 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(bupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb7130440 TopLevel (3), AtaReq 0xb718b000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881c90 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: mode 0x49, data f780f000, count 200, lCh 7, dev 0 get Phys(AHCI_CMD=b718b080) get Phys(data[0]=f780f000) set TERM ph data[0]=0:9e33000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 2) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881af0 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: se8b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ae4 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ad8 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChann0004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf7817 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881acc ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI rror 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ac0 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x4 IDE: Command abort MapError: ErrorCount >= MAX_ERRORS MapError: Disabling 32-bit PIO and Multi-sector IOs ScsiPortLogError: devExt 0xb74132b4, Srb 0xb7130440, P:T:D=7:0:0, MsgId 0x9 (4) (drivers/storage/scsiport/scsiport.c:1842) ScsiPortLogError() called (drivers/storage/scsiport/scsiport.c:1844) PathId: 0x07 TargetId: 0x00 Lun: 0x00 ErrorCode: 0x00000009 UniqueId: 0x00000004 UniataAhciSendPIOCommand: cntrlr 0x2:0x7 dev 0x0, cmd 0xc6, lba 0x0 bcount 0x0 feature 0x0, buff 0x0, len 0x0, WF 0x8 BuildAhciInternalSrb: lChan 7 [0x0] Srb 0xb7413fc0, AtaReq 0xb71b9000, CMD 0xb71b9080 ph 9ebf080 AHCI setup FIS b71b9080, ch 7, dev 0 27 80 c6 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 7, AtaReq 0xb71b9000 AHCI AtaReq CMD 0xb71b9080 (ph 0x9ebf080) prd_length 0x0, flags 0x5, base 9ebf080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[10] = 40000001 CI 0x1 ReadChannelPort4 ch7[10] = 40000001 IS 0x40000001 WriteChannelPciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 100 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb7130440, status 82 AtapiInterrupt: RequestComplete, srb 0xb7130440 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb7130440 TopLevel (3), AtaReq 0xb718b000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881c90 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, Derting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: mode 0x49, data f780f000, count 200, lCh 7, dev 0 get Phys(AHCI_CMD=b718b080) get Phys(data[0]=f780f000) set TERM ph data[0]=0:9e33000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 2) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChan ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_iStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => cReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881af0 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ae4 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 I/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 Rmplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ad8 ** Ide: Command AtaReq 0xb718b000 ** --- **:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next leIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ieq 0xf7881acc ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: l ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UlPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4)04a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ac0 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x4 IDE: Command abort MapError: ErrorCount >= MAX_ERRORS MapError: Disabling 32-bit PIO and Multi-sector IOs ScsiPortLogError: devExt 0xb74132b4, Srb 0xb7130440, P:T:D=7:0:0, MsgId 0x9 (4) (drivers/storage/scsiport/scsiport.c:1842) ScsiPortLogError() called (drivers/storage/scsiport/scsiport.c:1844) PathId: 0x07 TargetId: 0x00 Lun: 0x00 ErrorCode: 0x00000009 UniqueId: 0x00000004 UniataAhciSendPIOCommand: cntrlr 0x2:0x7 dev 0x0, cmd 0xc6, lba 0x0 bcount 0x0 feature 0x0, buff 0x0, len 0x0, WF 0x8 BuildAhciInternalSrb: lChan 7 [0x0] Srb 0xb7413fc0, AtaReq 0xb71b9000, CMD 0xb71b9080 ph 9ebf080 AHCI setup FIS b71b9080, ch 7, dev 0 27 80 c6 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 7, AtaReq 0xb71b9000 AHCI AtaReq CMD 0xb71b9080 (ph 0x9ebf080) prd_length 0x0, flags 0x5, base 9ebf080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[10] = 40000001 CI 0x1 ReadChannelPort4 ch7[10] = 40000001 IS 0x40000001 WriteChannelPort4 40000001 => ch7[10] UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 100 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb7130440, status 82 AtapiInterrupt: RequestComplete, srb 0xb7130440 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE x0 AtapiInterrupt: ReturnEnableDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb7130440 TopLevel (3), AtaReq 0xb718b000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881c90 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: mode 0x49, data f780f000, count 200, lCh 7, dev 0 get Phys(AHCI_CMD=b718b080) get Phys(data[0]=f780f000) set TERM ph data[0]=0:9e33000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 2) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 Writ AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 00 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004h7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881af0 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next reqntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf78100484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ae4 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 Rlete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ad8 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881acc ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch7[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b7130440 AtapiStartIo: query PORT for next request AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtaRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x2 chan 0x0 Intr: VendorID+DeviceID/Rev 0x91231b4b/0x11 (ex 1) AtapiInterrupt(base): AHCI: hIS=80 cntrlr 0x2 chan 0x0 AtapiInterrupt(base): cntrlr 0x2 chan 0x7 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 40000001 ReadChannelPort4 ch7[38] = 1 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 40000001 => ch7[10] AHCI: is=40000001 ss=00000113 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x2:7, irql 0x16, c 7 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 7 ReadChannelPort4 ch7[20] = 451 TFD 0x451 ERROR 0x4 ReadChannelPort4 ch7[34] = 0 ReadChannelPort4 ch7[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x50, error 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7HCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x40000001 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x1 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 40000001 WriteChannelPort4 40000001 => ch7[10] SError 0x0, IS 0x40000001 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: Entered with status (0x51) AHCI branch (IDE) AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStop: lChan 7 ReadChannelPort4 ch7[18] = 1000c017 WriteChannelPort4 1000c016 => ch7[18] ReadChannelPort4 ch7[18] = 1000c016 ReadChannelPort4 ch7[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 7 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch7[18] ReadChannelPort4 ch7[18] = 10004006 ReadChannelPort4 ch7[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 7 UniataAhciStartFR: lChan 7 ReadChannelPort4 ch7[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch7[18] UniataAhciStart: lChan 7 ReadChannelPort4 ch7[10] = 0 WriteChannelPort4 0 => ch7[10] SError 0x0, IS 0x0 ReadChannelPort4 ch7[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch7[18] ReadChannelPort4 ch7[38] = 0 CI 0x0 ReadChannelPort4 ch7[10] = 0 IS 0x0 WriteChannelPort4 0 => ch7[10] AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHC0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 UniataAhciStatus(7-7): hIS 0x80 ReadChannelPort4 ch7[10] = 0 ReadChannelPort4 ch7[38] = 0 ReadChannelPort4 ch7[34] = 0 WriteChannelPort4 0 => ch7[10] AHCI: is=00000000 ss=00000113 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 7 Base: 0xf7810480 MemIo 1 Proc 0 AHCI7_0x0 (0xf7810480) = 0x9ea2000 AHCI7_0x4 (0xf7810484) = 0x0 AHCI7_0x8 (0xf7810488) = 0x9ea2400 AHCI7_0xc (0xf781048c) = 0x0 AHCI7_0x10 (0xf7810490) = 0x0 AHCI7_0x14 (0xf7810494) = 0xfd4000ff AHCI7_0x18 (0xf7810498) = 0x1000c017 AHCI7_0x1c (0xf781049c) = 0x0 AHCI7_0x20 (0xf78104a0) = 0x451 AHCI7_0x24 (0xf78104a4) = 0xeb140101 AHCI7_0x28 (0xf78104a8) = 0x113 AHCI7_0x2c (0xf78104ac) = 0x300 AHCI7_0x30 (0xf78104b0) = 0x0 AHCI7_0x34 (0xf78104b4) = 0x0 AHCI7_0x38 (0xf78104b8) = 0x0 AHCI7_0x3c (0xf78104bc) = 0x0 AtapiInterrupt: Error 0x4 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 Errors in DMA mode AtapiInterrupt: NextRequest, srb=0xb7130440 ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x7:0x0:0x0 VendorID+DeviceID/Rev 0x91231b4b/0x11 SRB 0xb7130440, CDB 0xb7130470, AtaReq 0xb718b000, SCmd 0x28 UniataNeedQueueing: qd=1 Send to device 28 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7881ac0 ** Ide: Command AtaReq 0xb718b000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x7:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb718b000: cmd aligned b718b080, d=20 ahci_cmd_ptr 0xb718b080 AtapiDmaSetup: already setup, 1 entries IdeReadWrite: setup AHCI FIS AHCI setup FIS b718b080, ch 7, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 7, AtaReq 0xb718b000 AHCI AtaReq CMD 0xb718b080 (ph 0x9e91080) prd_length 0x1, flags 0x5, base 9e91080 ReadChannelPort4 ch7