(../../ntoskrnl/kd/kdio.c:376) ----------------------------------------------------- (../../ntoskrnl/kd/kdio.c:377) ReactOS 0.4-SVN (Build 20141019-r64834) (../../ntoskrnl/kd/kdio.c:379) 1 System Processor [1023 MB Memory] (../../ntoskrnl/kd/kdio.c:380) Command Line: DEBUG DEBUGPORT=COM1 BAUDRATE=115200 SOS MININT (../../ntoskrnl/kd/kdio.c:384) ARC Paths: multi(0)disk(0)cdrom(96) \ multi(0)disk(0)cdrom(96) \reactos\ (../../ntoskrnl/ke/i386/cpu.c:494) Supported CPU features : KF_V86_VIS KF_RDTSC KF_CR4 KF_CMOV KF_GLOBAL_PAGE KF_LARGE_PAGE KF_MTRR KF_CMPXCHG8B KF_MMX KF_WORKING_PTE KF_PAT KF_FXSR KF_FAST_SYSCALL KF_XMMI KF_XMMI64 (../../ntoskrnl/ke/i386/cpu.c:801) Prefetch Cache: 64 bytes L2 Cache: 0 bytes L2 Cache Line: 64 bytes L2 Cache Associativity: 0 (../../ntoskrnl/mm/ARM3/mminit.c:1443) HAL I/O Mapping at FFFE0000 is unsafe (../../ntoskrnl/mm/mminit.c:260) 0x80000000 - 0x83000000 Boot Loaded Image (../../ntoskrnl/mm/mminit.c:264) 0xB0000000 - 0xB0701000 PFN Database (../../ntoskrnl/mm/mminit.c:268) 0xB0701000 - 0xB26C9000 ARM3 Non Paged Pool (../../ntoskrnl/mm/mminit.c:272) 0xB9400000 - 0xBB400000 System View Space (../../ntoskrnl/mm/mminit.c:276) 0xBB400000 - 0xC0000000 Session Space (../../ntoskrnl/mm/mminit.c:279) 0xC0000000 - 0xC03FFFFF Page Tables (../../ntoskrnl/mm/mminit.c:282) 0xC0300000 - 0xC0300FFF Page Directories (../../ntoskrnl/mm/mminit.c:285) 0xC0400000 - 0xC07FFFFF Hyperspace (../../ntoskrnl/mm/mminit.c:289) 0xE1000000 - 0xECC00000 ARM3 Paged Pool (../../ntoskrnl/mm/mminit.c:292) 0xECC00000 - 0xF7BE0000 System PTE Space (../../ntoskrnl/mm/mminit.c:295) 0xF7BE0000 - 0xFFBE0000 Non Paged Pool Expansion PTE Space (../../ntoskrnl/config/cmcheck.c:25) CmCheckRegistry(0xB2473008, 2) is UNIMPLEMENTED! (../../hal/halx86/legacy/bussupp.c:623) Found parent bus (indicating PCI Bridge). PCI devices may fail! ====== PCI BUS HARDWARE DETECTION ======= 00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma] [8086:1237] (rev 02) Subsystem: Unknown [0000:0000] Flags: fast devsel, latency 0 Device has Extended Address Decoding. It may fail to work on older BIOSes! 00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] [8086:7000] (rev 00) Subsystem: Unknown [0000:0000] Flags: bus master, medium devsel, latency 0 00:02.0 VGA compatible controller [0300]: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter [80ee:beef] (rev 00) Subsystem: Unknown [0000:0000] Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at e0000000 (32-bit, prefetchable) [size=512M] Device is using IRQ 11! ISA Cards using that IRQ may fail! 00:03.0 Ethernet controller [0200]: Advanced Micro Devices, Inc. [AMD] 79c970 [PCnet32 LANCE] [1022:2000] (rev 40) Subsystem: PCnet - Fast 79C971 [1022:2000] Flags: bus master, medium devsel, latency 0, IRQ 10 I/O ports at d000 [size=4K] Memory at f0000000 (32-bit, non-prefetchable) [size=256M] Device is using IRQ 10! ISA Cards using that IRQ may fail! 00:04.0 System peripheral [0880]: InnoTek Systemberatung GmbH VirtualBox Guest Service [80ee:cafe] (rev 00) Subsystem: Unknown [0000:0000] Flags: bus master, fast devsel, latency 0, IRQ 09 I/O ports at d020 [size=32] Memory at f0400000 (32-bit, non-prefetchable) [size=4M] Memory at f0800000 (32-bit, prefetchable) [size=8M] Device is using IRQ 9! ISA Cards using that IRQ may fail! 00:05.0 Multimedia audio controller [0401]: Intel Corporation 82801AA AC'97 Audio Controller [8086:2415] (rev 01) Subsystem: Terminator 2x/i [8086:0000] Flags: bus master, medium devsel, latency 0, IRQ 11 I/O ports at d100 [size=256] I/O ports at d200 [size=512] Device is using IRQ 11! ISA Cards using that IRQ may fail! 00:06.0 USB controller [0c03]: Apple Inc. KeyLargo/Intrepid USB [106b:003f] (rev 00) Subsystem: GLoria L [0000:0000] Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at f0804000 (32-bit, non-prefetchable) [size=16K] Device is using IRQ 11! ISA Cards using that IRQ may fail! Device is an OHCI (USB) PCI Expansion Card. Turn off Legacy USB in your BIOS! 00:07.0 Secondary bus towards host CPU [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 08) Subsystem: Unknown [0000:0000] Flags: bus master, medium devsel, latency 0, IRQ 09 Device is using IRQ 9! ISA Cards using that IRQ may fail! 00:0b.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 00) Subsystem: Unknown [0000:0000] Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at f0805000 (32-bit, non-prefetchable) [size=4K] Device is using IRQ 10! ISA Cards using that IRQ may fail! Device is an Intel UHCI (USB) Controller. Turn off Legacy USB in your BIOS! 00:0d.0 SATA controller [0106]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] [8086:2829] (rev 02) Subsystem: Unknown [0000:0000] Flags: bus master, fast devsel, latency 0, IRQ 11 I/O ports at d240 [size=64] I/O ports at d248 [size=8] I/O ports at d250 [size=16] I/O ports at d258 [size=8] I/O ports at d260 [size=32] Memory at f0806000 (32-bit, non-prefetchable) [size=8K] Device is using IRQ 11! ISA Cards using that IRQ may fail! ====== PCI BUS DETECTION COMPLETE ======= PC Compatible Eisa/Isa HAL Detected (../../ntoskrnl/io/pnpmgr/pnpmgr.c:3192) Firmware mapper is enabled (../../ntoskrnl/io/pnpmgr/pnpreport.c:353) Reported device: DETECTEDInternal\PCI_HAL (Root\PCI_HAL\0) (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: UNKNOWN SAC DriverEntry: Entering. (../../ntoskrnl/io/iomgr/driver.c:1634) '\Driver\SACDRV' initialization failed, status (0xc0000037) (../../ntoskrnl/io/iomgr/driver.c:61) Deleting driver object '\Driver\SACDRV' (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: ACPI (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: MOUNTMGR (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: PCI (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: USBCCGP (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: USBEHCI (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: USBHUB (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: USBOHCI (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: USBUHCI ATAPI IDE MiniPort Driver (UniATA) v 0.45a8 Parameter PrintLogo Parameter PrintLogo = 0x0 UniATA Init: OS should be ReactOS UniATA Init: OS ver 4.1 (1), 1 CPU(s) Performance calibration: dt=14995, counter=3580819 InitBadBlocks general InitBadBlocks returned: 0xc0000034 UniataInitAtaCommands: Parameter SkipRaids Parameter SkipRaids = 0x1 Parameter ForceSimplex Parameter ForceSimplex = 0x0 Parameter LogToDisplay Parameter LogToDisplay = 0x0 HwInitializationDataSize = 50 set NeedPhysicalAddresses = TRUE set AtapiAdapterControl() ptr ATAPI IDE enum supported BusMaster Devices Parameter VirtualMachineType Parameter VirtualMachineType = 0x0 Parameter VirtualBox Parameter VirtualBox = 0x0 -- BusID: 0x0:0x4:0x0 - VirtualBox Guest Service -- BusID: 0x0:0xd:0x0 Storage Class DevId = 28298086 Class = 0001/0006, ProgIf 01 Parameter Include Parameter Include = 0x0 No force include, check exclude Parameter Exclude Parameter Exclude = 0x0 Default device found, pass 0 InterruptPin = 0x1 InterruptLine = 0xb Enabling Mem/Io spaces and busmastering... Initial pciData.Command = 0x7 PCI_ENABLE_IO_SPACE PCI_ENABLE_MEMORY_SPACE PCI_ENABLE_BUS_MASTER InterruptLine = 0xb Final pciData.Command = 0x7 Range 0 = 0xd241 Range 1 = 0xd249 Range 2 = 0xd251 Range 3 = 0xd259 Range 4 = 0xd261 Range 5 = 0xf0806000 count: BMListLen++ -- BusID: 0x0:0x4:0x0 - VirtualBox Guest Service -- BusID: 0x0:0xd:0x0 Storage Class DevId = 28298086 Class = 0001/0006, ProgIf 01 Parameter Include Parameter Include = 0x0 No force include, check exclude Parameter Exclude Parameter Exclude = 0x0 Default device found, pass 1 InterruptPin = 0x1 InterruptLine = 0xb Range 0 = 0xd241 Range 1 = 0xd249 Range 2 = 0xd251 Range 3 = 0xd259 Range 4 = 0xd261 Range 5 = 0xf0806000 found suitable device -- BusID: 0x0:0x4:0x0 - VirtualBox Guest Service -- BusID: 0x0:0xd:0x0 Storage Class DevId = 28298086 Class = 0001/0006, ProgIf 01 Parameter Include Parameter Include = 0x0 No force include, check exclude Parameter Exclude Parameter Exclude = 0x0 Default device found, pass 2 InterruptPin = 0x1 InterruptLine = 0xb Range 0 = 0xd241 Range 1 = 0xd249 Range 2 = 0xd251 Range 3 = 0xd259 Range 4 = 0xd261 Range 5 = 0xf0806000 found suitable device Add to BMList, AltInit 0 BMListLen=1 adjust options for VirtualBox Parameter WaitBusyCount Parameter WaitBusyCount = 0x4e20 Parameter WaitBusyDelay Parameter WaitBusyDelay = 0x96 Parameter WaitDrqDelay Parameter WaitDrqDelay = 0x64 Parameter WaitBusyLongCount Parameter WaitBusyLongCount = 0x4e20 Parameter WaitBusyLongDelay Parameter WaitBusyLongDelay = 0xfa Parameter AtapiSendDisableIntr Parameter AtapiSendDisableIntr = 0x0 Parameter AtapiDmaRawRead Parameter AtapiDmaRawRead = 0x0 Parameter MaxIsrWait Parameter MaxIsrWait = 0xc8 ATAPI IDE: Look for legacy ISA-bridged PCI IDE controller (onboard) ATAPI IDE: BMListLen 1 !BMList[i].MasterDev ATAPI IDE: Look for PCI IDE controller ATAPI IDE: i 0, BMListLen 1 Parameter IgnoreNativePci Parameter IgnoreNativePci = 0x0 Try init 8086 2829 (../../hal/halx86/legacy/bussupp.c:1159) Slot assignment for 5 on bus 0 (../../hal/halx86/legacy/bus/pcibus.c:719) WARNING: PCI Slot Resource Assignment is FOOBAR UniataFindBusMasterController: Context=0, BMListLen=1 ConfigInfo->Length 8c bm_offset 0, channel 0 AdapterInterfaceType=0x5 IoBusNumber=0x0 slotNumber=0xd busDataRead DevId = 28298086 Class = 0001/0006 Storage Class UniataChipDetect: HwFlags: 0x0 Parameter ForceSimplex Parameter ForceSimplex = 0x0 i: 0x33 VendorID/DeviceID/Rev 0x8086/0x2829/0x2 i: 0x2a HwFlags: 0x12000000 Parameter HwFlagsOverride Parameter HwFlagsOverride = 0x12000000 HwFlagsOverride: 0x12000000 Parameter HwFlagsAdd Parameter HwFlagsAdd = 0x0 HwFlagsAdd: 0x0 HwFlags (final): 0x12000000 MaxTransferMode: 0x48 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 UniataAhciDetect: Parameter IgnoreAhci Parameter IgnoreAhci = 0x0 AtapiGetIoRange: AtapiGetIoRange: rid 0x5, start 0xf0806000, offs 0x0, len 0x10, mem 0x1 AtapiGetIoRange: 0xf77d5000 MemIo AHCI Base: 0xf77d5000 MemIo 1 Proc 0 AHCI_0x0 (0xf77d5000) = 0xc8241f83 AHCI_0x4 (0xf77d5004) = 0x80000000 AHCI_0x8 (0xf77d5008) = 0x0 AHCI_0xc (0xf77d500c) = 0xf AHCI_0x10 (0xf77d5010) = 0x10100 check AHCI mode, GHC 0x80000000 AHCI CAP 0xc8241f83, CAP2 0x0 64bit NCQ CCC AHCI PI 0xf CommandSlots 31 Detected Channels 4 / 4 Adjusted Channels 4 AHCI version 0x1.10 controller with 4 ports (mask 0xf) detected AHCI SATA Gen 2 PM not supported -> 1 lun/chan AHCI detect status 1 allocate 1 Luns for 4 channels Intel chip config: 40 try run AHCI ForceSimplex = 0 HwFlags = 12000000 (0)HwFlags = 12000000 (1)HwFlags = 12000000 (2)found suitable device HwFlags = 12000000 (3) AHCI registers layout AtapiReadChipConfig: devExt 0xb246f2b4 AtapiReadChipConfig: dev 0x0, ph chan -1 Parameter ForceSimplex Parameter ForceSimplex = 0x0 MaxTransferMode (base): 0x48 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 Parameter AtapiDmaZeroTransfer Parameter AtapiDmaZeroTransfer = 0x0 Parameter AtapiDmaControlCmd Parameter AtapiDmaControlCmd = 0x0 Parameter AtapiDmaRawRead Parameter AtapiDmaRawRead = 0x0 Parameter AtapiDmaReadWrite Parameter AtapiDmaReadWrite = 0x1 AtapiChipInit: dev 0x0, ph chan -2, c -1 HwFlags: 0x12000000 VendorID/DeviceID/Rev 0x8086/0x2829/0x2 UniataAhciInit: AHCI Base: 0xf77d5000 MemIo 1 Proc 0 AHCI_0x0 (0xf77d5000) = 0xc8241f83 AHCI_0x4 (0xf77d5004) = 0x80000000 AHCI_0x8 (0xf77d5008) = 0x0 AHCI_0xc (0xf77d500c) = 0xf AHCI_0x10 (0xf77d5010) = 0x10100 get GHC disable intr, GHC 0x80000000 reset AHCI controller, GHC 0x80000000 AHCI GHC 0x80000000 AHCI GHC 0x80000000 AHCI CAP 0xc8241f83 AHCI 64bit AHCI 31 CMD slots AHCI legasy SATA AHCI PI 0xf SATA Gen 2 chan 0, offs 0x100 AtapiSetupLunPtrs for channel 0 of 4, 1 luns Chan 0xb2692008 Lun 0x0 Lun ptr 0xb246e008 AtaReq 0xb2693000: cmd aligned b2693080, d=20 ahci_cmd_ptr 0xb2693080 AtapiDmaAlloc: AHCI AtapiDmaAlloc: CLP BASE b246c000 AtapiDmaAlloc: CLP BASE 1k-aligned b246c000 AtapiVirtToPhysAddr_: b246c000 -> 00000000:04d6b000 AtapiDmaAlloc: CLP Phys BASE 4d6b000 imp: 0xf & 0x1 UniataAhciResume: lChan 0 WriteChannelPort4 0 => ch0[14] AHCI CLB setup WriteChannelPort4 4d6b000 => ch0[0] WriteChannelPort4 0 => ch0[4] AHCI RCV FIS setup WriteChannelPort4 4d6b400 => ch0[8] WriteChannelPort4 0 => ch0[c] WriteChannelPort4 10000006 => ch0[18] UniataAhciStartFR: lChan 0 ReadChannelPort4 ch0[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch0[18] UniataAhciStart: lChan 0 ReadChannelPort4 ch0[10] = 0 WriteChannelPort4 0 => ch0[10] SError 0x0, IS 0x0 ReadChannelPort4 ch0[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch0[18] AHCI port 0 Base: 0xf77d5100 MemIo 1 Proc 0 AHCI0_0x0 (0xf77d5100) = 0x4d6b000 AHCI0_0x4 (0xf77d5104) = 0x0 AHCI0_0x8 (0xf77d5108) = 0x4d6b400 AHCI0_0xc (0xf77d510c) = 0x0 AHCI0_0x10 (0xf77d5110) = 0x0 AHCI0_0x14 (0xf77d5114) = 0x0 AHCI0_0x18 (0xf77d5118) = 0x1000c017 AHCI0_0x1c (0xf77d511c) = 0x0 AHCI0_0x20 (0xf77d5120) = 0x130 AHCI0_0x24 (0xf77d5124) = 0xeb140101 AHCI0_0x28 (0xf77d5128) = 0x123 AHCI0_0x2c (0xf77d512c) = 0x0 AHCI0_0x30 (0xf77d5130) = 0x0 AHCI0_0x34 (0xf77d5134) = 0x0 AHCI0_0x38 (0xf77d5138) = 0x0 AHCI0_0x3c (0xf77d513c) = 0x0 chan 1, offs 0x180 AtapiSetupLunPtrs for channel 1 of 4, 1 luns Chan 0xb2692270 Lun 0x0 Lun ptr 0xb246e310 AtaReq 0xb2694000: cmd aligned b2694080, d=20 ahci_cmd_ptr 0xb2694080 AtapiDmaAlloc: AHCI AtapiDmaAlloc: CLP BASE b2690000 AtapiDmaAlloc: CLP BASE 1k-aligned b2690000 AtapiVirtToPhysAddr_: b2690000 -> 00000000:04f8f000 AtapiDmaAlloc: CLP Phys BASE 4f8f000 imp: 0xf & 0x2 UniataAhciResume: lChan 1 WriteChannelPort4 0 => ch1[14] AHCI CLB setup WriteChannelPort4 4f8f000 => ch1[0] WriteChannelPort4 0 => ch1[4] AHCI RCV FIS setup WriteChannelPort4 4f8f400 => ch1[8] WriteChannelPort4 0 => ch1[c] WriteChannelPort4 10000006 => ch1[18] UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch1[18] UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch1[18] AHCI port 1 Base: 0xf77d5180 MemIo 1 Proc 0 AHCI1_0x0 (0xf77d5180) = 0x4f8f000 AHCI1_0x4 (0xf77d5184) = 0x0 AHCI1_0x8 (0xf77d5188) = 0x4f8f400 AHCI1_0xc (0xf77d518c) = 0x0 AHCI1_0x10 (0xf77d5190) = 0x0 AHCI1_0x14 (0xf77d5194) = 0x0 AHCI1_0x18 (0xf77d5198) = 0x1000c017 AHCI1_0x1c (0xf77d519c) = 0x0 AHCI1_0x20 (0xf77d51a0) = 0x130 AHCI1_0x24 (0xf77d51a4) = 0x101 AHCI1_0x28 (0xf77d51a8) = 0x123 AHCI1_0x2c (0xf77d51ac) = 0x0 AHCI1_0x30 (0xf77d51b0) = 0x0 AHCI1_0x34 (0xf77d51b4) = 0x0 AHCI1_0x38 (0xf77d51b8) = 0x0 AHCI1_0x3c (0xf77d51bc) = 0x0 chan 2, offs 0x200 AtapiSetupLunPtrs for channel 2 of 4, 1 luns Chan 0xb26924d8 Lun 0x0 Lun ptr 0xb246e618 AtaReq 0xb2695000: cmd aligned b2695080, d=20 ahci_cmd_ptr 0xb2695080 AtapiDmaAlloc: AHCI AtapiDmaAlloc: CLP BASE b246a000 AtapiDmaAlloc: CLP BASE 1k-aligned b246a000 AtapiVirtToPhysAddr_: b246a000 -> 00000000:04d69000 AtapiDmaAlloc: CLP Phys BASE 4d69000 imp: 0xf & 0x4 UniataAhciResume: lChan 2 WriteChannelPort4 0 => ch2[14] AHCI CLB setup WriteChannelPort4 4d69000 => ch2[0] WriteChannelPort4 0 => ch2[4] AHCI RCV FIS setup WriteChannelPort4 4d69400 => ch2[8] WriteChannelPort4 0 => ch2[c] WriteChannelPort4 10000006 => ch2[18] UniataAhciStartFR: lChan 2 ReadChannelPort4 ch2[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch2[18] UniataAhciStart: lChan 2 ReadChannelPort4 ch2[10] = 0 WriteChannelPort4 0 => ch2[10] SError 0x0, IS 0x0 ReadChannelPort4 ch2[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch2[18] AHCI port 2 Base: 0xf77d5200 MemIo 1 Proc 0 AHCI2_0x0 (0xf77d5200) = 0x4d69000 AHCI2_0x4 (0xf77d5204) = 0x0 AHCI2_0x8 (0xf77d5208) = 0x4d69400 AHCI2_0xc (0xf77d520c) = 0x0 AHCI2_0x10 (0xf77d5210) = 0x0 AHCI2_0x14 (0xf77d5214) = 0x0 AHCI2_0x18 (0xf77d5218) = 0x1000c017 AHCI2_0x1c (0xf77d521c) = 0x0 AHCI2_0x20 (0xf77d5220) = 0x130 AHCI2_0x24 (0xf77d5224) = 0x101 AHCI2_0x28 (0xf77d5228) = 0x123 AHCI2_0x2c (0xf77d522c) = 0x0 AHCI2_0x30 (0xf77d5230) = 0x0 AHCI2_0x34 (0xf77d5234) = 0x0 AHCI2_0x38 (0xf77d5238) = 0x0 AHCI2_0x3c (0xf77d523c) = 0x0 chan 3, offs 0x280 AtapiSetupLunPtrs for channel 3 of 4, 1 luns Chan 0xb2692740 Lun 0x0 Lun ptr 0xb246e920 AtaReq 0xb2696000: cmd aligned b2696080, d=20 ahci_cmd_ptr 0xb2696080 AtapiDmaAlloc: AHCI AtapiDmaAlloc: CLP BASE b268e000 AtapiDmaAlloc: CLP BASE 1k-aligned b268e000 AtapiVirtToPhysAddr_: b268e000 -> 00000000:04f8d000 AtapiDmaAlloc: CLP Phys BASE 4f8d000 imp: 0xf & 0x8 UniataAhciResume: lChan 3 WriteChannelPort4 0 => ch3[14] AHCI CLB setup WriteChannelPort4 4f8d000 => ch3[0] WriteChannelPort4 0 => ch3[4] AHCI RCV FIS setup WriteChannelPort4 4f8d400 => ch3[8] WriteChannelPort4 0 => ch3[c] WriteChannelPort4 10000006 => ch3[18] UniataAhciStartFR: lChan 3 ReadChannelPort4 ch3[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch3[18] UniataAhciStart: lChan 3 ReadChannelPort4 ch3[10] = 0 WriteChannelPort4 0 => ch3[10] SError 0x0, IS 0x0 ReadChannelPort4 ch3[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch3[18] AHCI port 3 Base: 0xf77d5280 MemIo 1 Proc 0 AHCI3_0x0 (0xf77d5280) = 0x4f8d000 AHCI3_0x4 (0xf77d5284) = 0x0 AHCI3_0x8 (0xf77d5288) = 0x4f8d400 AHCI3_0xc (0xf77d528c) = 0x0 AHCI3_0x10 (0xf77d5290) = 0x0 AHCI3_0x14 (0xf77d5294) = 0x0 AHCI3_0x18 (0xf77d5298) = 0x1000c017 AHCI3_0x1c (0xf77d529c) = 0x0 AHCI3_0x20 (0xf77d52a0) = 0x130 AHCI3_0x24 (0xf77d52a4) = 0xeb140101 AHCI3_0x28 (0xf77d52a8) = 0x123 AHCI3_0x2c (0xf77d52ac) = 0x0 AHCI3_0x30 (0xf77d52b0) = 0x0 AHCI3_0x34 (0xf77d52b4) = 0x0 AHCI3_0x38 (0xf77d52b8) = 0x0 AHCI3_0x3c (0xf77d52bc) = 0x0 simplexOnly = 0 (2)!MasterDev update ConfigInfo->nt4 using AtaReq sz 1000 update ConfigInfo->w2k: 64bit 1 chan[0] InterruptMode: 0, Level 11, Level2 0, Vector 11, Vector2 0 Reconstruct ConfigInfo set Dma32BitAddresses BMList[i].channel 0x0, NumberChannels 0x4, channel 0x0 de 0xb246f2b4, Channel 0x0 chan = 0xb2692008 AtapiSetupLunPtrs for channel 0 of 4, 1 luns Chan 0xb2692008 Lun 0x0 Lun ptr 0xb246e008 AtaReq 0xb2693000: cmd aligned b2693080, d=20 ahci_cmd_ptr 0xb2693080 AtapiReadChipConfig: devExt 0xb246f2b4 AtapiReadChipConfig: dev 0x0, ph chan 0 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 Parameter ReorderEnable Parameter ReorderEnable = 0x1 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 No more setup for AHCI channel IDX_IO1 0->0(io) IDX_IO2 10->f77d5120(mem) IDX_BM_IO 14->0(io) IDX_SATA_IO 19->f77d5128(mem) AtapiDmaAlloc: AHCI already initialized b246c000 de 0xb246f2b4, Channel 0x1 chan = 0xb2692270 AtapiSetupLunPtrs for channel 1 of 4, 1 luns Chan 0xb2692270 Lun 0x0 Lun ptr 0xb246e310 AtaReq 0xb2694000: cmd aligned b2694080, d=20 ahci_cmd_ptr 0xb2694080 AtapiReadChipConfig: devExt 0xb246f2b4 AtapiReadChipConfig: dev 0x0, ph chan 1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 Parameter ReorderEnable Parameter ReorderEnable = 0x1 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 No more setup for AHCI channel IDX_IO1 0->0(io) IDX_IO2 10->f77d51a0(mem) IDX_BM_IO 14->0(io) IDX_SATA_IO 19->f77d51a8(mem) AtapiDmaAlloc: AHCI already initialized b2690000 de 0xb246f2b4, Channel 0x2 chan = 0xb26924d8 AtapiSetupLunPtrs for channel 2 of 4, 1 luns Chan 0xb26924d8 Lun 0x0 Lun ptr 0xb246e618 AtaReq 0xb2695000: cmd aligned b2695080, d=20 ahci_cmd_ptr 0xb2695080 AtapiReadChipConfig: devExt 0xb246f2b4 AtapiReadChipConfig: dev 0x0, ph chan 2 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 Parameter ReorderEnable Parameter ReorderEnable = 0x1 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 No more setup for AHCI channel IDX_IO1 0->0(io) IDX_IO2 10->f77d5220(mem) IDX_BM_IO 14->0(io) IDX_SATA_IO 19->f77d5228(mem) AtapiDmaAlloc: AHCI already initialized b246a000 de 0xb246f2b4, Channel 0x3 chan = 0xb2692740 AtapiSetupLunPtrs for channel 3 of 4, 1 luns Chan 0xb2692740 Lun 0x0 Lun ptr 0xb246e920 AtaReq 0xb2696000: cmd aligned b2696080, d=20 ahci_cmd_ptr 0xb2696080 AtapiReadChipConfig: devExt 0xb246f2b4 AtapiReadChipConfig: dev 0x0, ph chan 3 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 Parameter ReorderEnable Parameter ReorderEnable = 0x1 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 No more setup for AHCI channel IDX_IO1 0->0(io) IDX_IO2 10->f77d52a0(mem) IDX_BM_IO 14->0(io) IDX_SATA_IO 19->f77d52a8(mem) AtapiDmaAlloc: AHCI already initialized b268e000 exit: init spinlock MasterDev=0x0, NumberChannels=0x4, Isr2DevObj=0x0 Init ISR: Multichannel native mode, go... Create DO DO name: len(38, 38), \Device\uniata0_2ch HalGetInterruptVector OrigAdapterInterfaceType=5 SystemIoBusNumber=0 BusInterruptLevel=11 BusInterruptVector=11 isr2_de 0xb2692d50 isr2_vector 0x3b isr2_irql 0x10 isr2_affinity 0x1 IoConnectInterrupt MasterDev=0x0, NumberChannels=0x4, Isr2DevObj=0xb2692c98 final chan[4] InterruptMode: 0, Level 11, Level2 0, Vector 11, Vector2 0 return SP_RETURN_FOUND AtapiHwInitialize: (base) AtapiChipInit: dev 0xffffffff, ph chan -1, c -1 HwFlags: 0x12000000 VendorID/DeviceID/Rev 0x8086/0x2829/0x2 UniataAhciInit: AHCI Base: 0xf77d5000 MemIo 1 Proc 0 AHCI_0x0 (0xf77d5000) = 0xc8241f83 AHCI_0x4 (0xf77d5004) = 0x80000002 AHCI_0x8 (0xf77d5008) = 0x0 AHCI_0xc (0xf77d500c) = 0xf AHCI_0x10 (0xf77d5010) = 0x10100 get GHC disable intr, GHC 0x80000002 reset AHCI controller, GHC 0x80000000 AHCI GHC 0x80000000 AHCI GHC 0x80000000 AHCI CAP 0xc8241f83 AHCI 64bit AHCI 31 CMD slots AHCI legasy SATA AHCI PI 0xf SATA Gen 2 chan 0, offs 0x100 AtapiSetupLunPtrs for channel 0 of 4, 1 luns Chan 0xb2692008 Lun 0x0 Lun ptr 0xb246e008 AtaReq 0xb2693000: cmd aligned b2693080, d=20 ahci_cmd_ptr 0xb2693080 AtapiDmaAlloc: AHCI already initialized b246c000 imp: 0xf & 0x1 UniataAhciResume: lChan 0 WriteChannelPort4 0 => ch0[14] AHCI CLB setup WriteChannelPort4 4d6b000 => ch0[0] WriteChannelPort4 0 => ch0[4] AHCI RCV FIS setup WriteChannelPort4 4d6b400 => ch0[8] WriteChannelPort4 0 => ch0[c] WriteChannelPort4 10000006 => ch0[18] UniataAhciStartFR: lChan 0 ReadChannelPort4 ch0[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch0[18] UniataAhciStart: lChan 0 ReadChannelPort4 ch0[10] = 0 WriteChannelPort4 0 => ch0[10] SError 0x0, IS 0x0 ReadChannelPort4 ch0[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch0[18] AHCI port 0 Base: 0xf77d5100 MemIo 1 Proc 0 AHCI0_0x0 (0xf77d5100) = 0x4d6b000 AHCI0_0x4 (0xf77d5104) = 0x0 AHCI0_0x8 (0xf77d5108) = 0x4d6b400 AHCI0_0xc (0xf77d510c) = 0x0 AHCI0_0x10 (0xf77d5110) = 0x0 AHCI0_0x14 (0xf77d5114) = 0x0 AHCI0_0x18 (0xf77d5118) = 0x1000c017 AHCI0_0x1c (0xf77d511c) = 0x0 AHCI0_0x20 (0xf77d5120) = 0x130 AHCI0_0x24 (0xf77d5124) = 0xeb140101 AHCI0_0x28 (0xf77d5128) = 0x123 AHCI0_0x2c (0xf77d512c) = 0x0 AHCI0_0x30 (0xf77d5130) = 0x0 AHCI0_0x34 (0xf77d5134) = 0x0 AHCI0_0x38 (0xf77d5138) = 0x0 AHCI0_0x3c (0xf77d513c) = 0x0 chan 1, offs 0x180 AtapiSetupLunPtrs for channel 1 of 4, 1 luns Chan 0xb2692270 Lun 0x0 Lun ptr 0xb246e310 AtaReq 0xb2694000: cmd aligned b2694080, d=20 ahci_cmd_ptr 0xb2694080 AtapiDmaAlloc: AHCI already initialized b2690000 imp: 0xf & 0x2 UniataAhciResume: lChan 1 WriteChannelPort4 0 => ch1[14] AHCI CLB setup WriteChannelPort4 4f8f000 => ch1[0] WriteChannelPort4 0 => ch1[4] AHCI RCV FIS setup WriteChannelPort4 4f8f400 => ch1[8] WriteChannelPort4 0 => ch1[c] WriteChannelPort4 10000006 => ch1[18] UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch1[18] UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch1[18] AHCI port 1 Base: 0xf77d5180 MemIo 1 Proc 0 AHCI1_0x0 (0xf77d5180) = 0x4f8f000 AHCI1_0x4 (0xf77d5184) = 0x0 AHCI1_0x8 (0xf77d5188) = 0x4f8f400 AHCI1_0xc (0xf77d518c) = 0x0 AHCI1_0x10 (0xf77d5190) = 0x0 AHCI1_0x14 (0xf77d5194) = 0x0 AHCI1_0x18 (0xf77d5198) = 0x1000c017 AHCI1_0x1c (0xf77d519c) = 0x0 AHCI1_0x20 (0xf77d51a0) = 0x130 AHCI1_0x24 (0xf77d51a4) = 0x101 AHCI1_0x28 (0xf77d51a8) = 0x123 AHCI1_0x2c (0xf77d51ac) = 0x0 AHCI1_0x30 (0xf77d51b0) = 0x0 AHCI1_0x34 (0xf77d51b4) = 0x0 AHCI1_0x38 (0xf77d51b8) = 0x0 AHCI1_0x3c (0xf77d51bc) = 0x0 chan 2, offs 0x200 AtapiSetupLunPtrs for channel 2 of 4, 1 luns Chan 0xb26924d8 Lun 0x0 Lun ptr 0xb246e618 AtaReq 0xb2695000: cmd aligned b2695080, d=20 ahci_cmd_ptr 0xb2695080 AtapiDmaAlloc: AHCI already initialized b246a000 imp: 0xf & 0x4 UniataAhciResume: lChan 2 WriteChannelPort4 0 => ch2[14] AHCI CLB setup WriteChannelPort4 4d69000 => ch2[0] WriteChannelPort4 0 => ch2[4] AHCI RCV FIS setup WriteChannelPort4 4d69400 => ch2[8] WriteChannelPort4 0 => ch2[c] WriteChannelPort4 10000006 => ch2[18] UniataAhciStartFR: lChan 2 ReadChannelPort4 ch2[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch2[18] UniataAhciStart: lChan 2 ReadChannelPort4 ch2[10] = 0 WriteChannelPort4 0 => ch2[10] SError 0x0, IS 0x0 ReadChannelPort4 ch2[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch2[18] AHCI port 2 Base: 0xf77d5200 MemIo 1 Proc 0 AHCI2_0x0 (0xf77d5200) = 0x4d69000 AHCI2_0x4 (0xf77d5204) = 0x0 AHCI2_0x8 (0xf77d5208) = 0x4d69400 AHCI2_0xc (0xf77d520c) = 0x0 AHCI2_0x10 (0xf77d5210) = 0x0 AHCI2_0x14 (0xf77d5214) = 0x0 AHCI2_0x18 (0xf77d5218) = 0x1000c017 AHCI2_0x1c (0xf77d521c) = 0x0 AHCI2_0x20 (0xf77d5220) = 0x130 AHCI2_0x24 (0xf77d5224) = 0x101 AHCI2_0x28 (0xf77d5228) = 0x123 AHCI2_0x2c (0xf77d522c) = 0x0 AHCI2_0x30 (0xf77d5230) = 0x0 AHCI2_0x34 (0xf77d5234) = 0x0 AHCI2_0x38 (0xf77d5238) = 0x0 AHCI2_0x3c (0xf77d523c) = 0x0 chan 3, offs 0x280 AtapiSetupLunPtrs for channel 3 of 4, 1 luns Chan 0xb2692740 Lun 0x0 Lun ptr 0xb246e920 AtaReq 0xb2696000: cmd aligned b2696080, d=20 ahci_cmd_ptr 0xb2696080 AtapiDmaAlloc: AHCI already initialized b268e000 imp: 0xf & 0x8 UniataAhciResume: lChan 3 WriteChannelPort4 0 => ch3[14] AHCI CLB setup WriteChannelPort4 4f8d000 => ch3[0] WriteChannelPort4 0 => ch3[4] AHCI RCV FIS setup WriteChannelPort4 4f8d400 => ch3[8] WriteChannelPort4 0 => ch3[c] WriteChannelPort4 10000006 => ch3[18] UniataAhciStartFR: lChan 3 ReadChannelPort4 ch3[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch3[18] UniataAhciStart: lChan 3 ReadChannelPort4 ch3[10] = 0 WriteChannelPort4 0 => ch3[10] SError 0x0, IS 0x0 ReadChannelPort4 ch3[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch3[18] AHCI port 3 Base: 0xf77d5280 MemIo 1 Proc 0 AHCI3_0x0 (0xf77d5280) = 0x4f8d000 AHCI3_0x4 (0xf77d5284) = 0x0 AHCI3_0x8 (0xf77d5288) = 0x4f8d400 AHCI3_0xc (0xf77d528c) = 0x0 AHCI3_0x10 (0xf77d5290) = 0x0 AHCI3_0x14 (0xf77d5294) = 0x0 AHCI3_0x18 (0xf77d5298) = 0x1000c017 AHCI3_0x1c (0xf77d529c) = 0x0 AHCI3_0x20 (0xf77d52a0) = 0x130 AHCI3_0x24 (0xf77d52a4) = 0xeb140101 AHCI3_0x28 (0xf77d52a8) = 0x123 AHCI3_0x2c (0xf77d52ac) = 0x0 AHCI3_0x30 (0xf77d52b0) = 0x0 AHCI3_0x34 (0xf77d52b4) = 0x0 AHCI3_0x38 (0xf77d52b8) = 0x0 AHCI3_0x3c (0xf77d52bc) = 0x0 imp: 0xf & 0x1 AtapiChipInit: dev 0xffffffff, ph chan 0, c 0 HwFlags: 0x12000000 VendorID/DeviceID/Rev 0x8086/0x2829/0x2 AHCI single channel init UniataAhciReset: lChan 0 WriteChannelPort4 0 => ch0[14] UniataAhciHardReset: lChan 0 UniataAhciStop: lChan 0 ReadChannelPort4 ch0[18] = 1000c017 WriteChannelPort4 1000c016 => ch0[18] ReadChannelPort4 ch0[18] = 10004016 final CMD 0x10004016 UniataSataPhyEnable: SControl 0x0 UniataSataPhyEnable: retry init 0 SControl 00000001 UniataSataPhyEnable: retry idle 0 SControl 00000300 UniataSataConnect: SATA TransferMode 0x48 UniataSataConnect: OK, ATA status 0x31 UniataAhciWaitReady: lChan 0 ReadChannelPort4 ch0[20] = 131 TFD 0x131 TFD 0x131 AHCI port 0 Base: 0xf77d5100 MemIo 1 Proc 0 AHCI0_0x0 (0xf77d5100) = 0x4d6b000 AHCI0_0x4 (0xf77d5104) = 0x0 AHCI0_0x8 (0xf77d5108) = 0x4d6b400 AHCI0_0xc (0xf77d510c) = 0x0 AHCI0_0x10 (0xf77d5110) = 0x1 AHCI0_0x14 (0xf77d5114) = 0x0 AHCI0_0x18 (0xf77d5118) = 0x10004016 AHCI0_0x1c (0xf77d511c) = 0x0 AHCI0_0x20 (0xf77d5120) = 0x131 AHCI0_0x24 (0xf77d5124) = 0xeb140101 AHCI0_0x28 (0xf77d5128) = 0x123 AHCI0_0x2c (0xf77d512c) = 0x300 AHCI0_0x30 (0xf77d5130) = 0x0 AHCI0_0x34 (0xf77d5134) = 0x0 AHCI0_0x38 (0xf77d5138) = 0x0 AHCI0_0x3c (0xf77d513c) = 0x0 ReadChannelPort4 ch0[24] = eb140101 sig: 0xeb140101 UniataAhciStart: lChan 0 ReadChannelPort4 ch0[10] = 1 WriteChannelPort4 1 => ch0[10] SError 0x0, IS 0x1 ReadChannelPort4 ch0[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch0[18] WriteChannelPort4 f900003f => ch0[14] UniataAhciSoftReset: lChan 0 UniataAhciStop: lChan 0 ReadChannelPort4 ch0[18] = 1000c017 WriteChannelPort4 1000c016 => ch0[18] ReadChannelPort4 ch0[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 0 ReadChannelPort4 ch0[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch0[18] ReadChannelPort4 ch0[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 0 UniataAhciStartFR: lChan 0 ReadChannelPort4 ch0[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch0[18] UniataAhciStart: lChan 0 ReadChannelPort4 ch0[10] = 0 WriteChannelPort4 0 => ch0[10] SError 0x0, IS 0x0 ReadChannelPort4 ch0[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch0[18] UniataAhciSendCommand: lChan 0 WriteChannelPort4 1 => ch0[38] ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[10] = 1 CI 0x1 ReadChannelPort4 ch0[10] = 1 IS 0x1 WriteChannelPort4 1 => ch0[10] UniataAhciSendCommand: lChan 0 WriteChannelPort4 1 => ch0[38] ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 CI 0x0 ReadChannelPort4 ch0[10] = 0 IS 0x0 WriteChannelPort4 0 => ch0[10] UniataAhciWaitReady: lChan 0 ReadChannelPort4 ch0[20] = 130 TFD 0x130 34 00 00 01 01 14 eb 00 00 00 00 00 01 00 00 00 00 00 00 00 signature 0xeb140101 ATAPI dev FindDevices: AtapiDisableInterrupts_0: 0 WriteChannelPort4 0 => ch0[14] max_ldev 1 CheckDevice: Device 0x0 SStatus 123 AHCI check ReadChannelPort4 ch0[24] = eb140101 ATAPI at home CheckDevice: reset AHCI dev UniataAhciSoftReset: lChan 0 UniataAhciStop: lChan 0 ReadChannelPort4 ch0[18] = 1000c017 WriteChannelPort4 1000c016 => ch0[18] ReadChannelPort4 ch0[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 0 ReadChannelPort4 ch0[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch0[18] ReadChannelPort4 ch0[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 0 UniataAhciStartFR: lChan 0 ReadChannelPort4 ch0[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch0[18] UniataAhciStart: lChan 0 ReadChannelPort4 ch0[10] = 0 WriteChannelPort4 0 => ch0[10] SError 0x0, IS 0x0 ReadChannelPort4 ch0[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch0[18] UniataAhciSendCommand: lChan 0 WriteChannelPort4 1 => ch0[38] ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[10] = 1 CI 0x1 ReadChannelPort4 ch0[10] = 1 IS 0x1 WriteChannelPort4 1 => ch0[10] UniataAhciSendCommand: lChan 0 WriteChannelPort4 1 => ch0[38] ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 CI 0x0 ReadChannelPort4 ch0[10] = 0 IS 0x0 WriteChannelPort4 0 => ch0[10] UniataAhciWaitReady: lChan 0 ReadChannelPort4 ch0[20] = 130 TFD 0x130 34 00 00 01 01 14 eb 00 00 00 00 00 01 00 00 00 00 00 00 00 IssueIdentify: Checking for ATAPI. Status (0x30) UniataAhciSendPIOCommand: cntrlr 0x0:0x0 dev 0x0, cmd 0xa1, lba 0x0 bcount 0x0 feature 0x0, buff 0xb246f2f8, len 0x200, WF 0x2 length/DEV_BSIZE != bcount BuildAhciInternalSrb: lChan 0 [0x0] Srb 0xb246fb18, AtaReq 0xb2693000, CMD 0xb2693080 ph 0 AHCI setup FIS b2693080, ch 0, dev 0 27 80 a1 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 assume IN AtapiDmaSetup: mode 0x48, data b246f2f8, count 200, lCh 0, dev 0 get Phys(AHCI_CMD=b2693080) AtapiVirtToPhysAddr_: b2693080 -> 00000000:04f92080 get Phys(data[0]=b246f2f8) AtapiVirtToPhysAddr_: b246f2f8 -> 00000000:04d6e2f8 set TERM ph data[0]=0:4d6e2f8 (1ff) AtapiDmaSetup: OK UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2693000 AHCI AtaReq CMD 0xb2693080 (ph 0x4f92080) prd_length 0x1, flags 0x5, base 4f92080 ReadChannelPort4 ch0[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch0[38] ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[10] = 1 CI 0x1 ReadChannelPort4 ch0[10] = 1 IS 0x1 WriteChannelPort4 1 => ch0[10] UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 IssueIdentify: Status after read words 0x50 Model: BVXOC -DOR M FW: .1 0 S/N: BV-0a1b2c3d4 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 0 SATA support: 0, CAPs 0x104 OrigTransferMode: 48, Active: 48 Accoustic 0, cur 0 AdvPowerMode 0, cur 0 InitBadBlocks local LunExt 0xb246e008 S/N:VBOX_CD-ROM_____________________________-VB0-1a2b3c4d________ IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: detected AHCI Device 0x0 CheckDevice: check status: found imp: 0xf & 0x1 AtapiEnableInterrupts_0: 1 WriteChannelPort4 fd4000ff => ch0[14] FindDevices: returning 1 (AHCI) AtapiHwInitialize: lChannel 0x0, dev 0 AtapiDisableInterrupts_0: 0 WriteChannelPort4 0 => ch0[14] AtapiHwInitialize: ATAPI/Changer branch try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 0/0 AtapiDisableInterrupts_0: 1 WriteChannelPort4 0 => ch0[14] UniataAhciSendPIOCommand: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 bcount 0x46 feature 0x3, buff 0x0, len 0x0, WF 0x8 length/DEV_BSIZE != bcount BuildAhciInternalSrb: lChan 0 [0x0] Srb 0xb246fb18, AtaReq 0xb2693000, CMD 0xb2693080 ph 4f92080 AHCI setup FIS b2693080, ch 0, dev 0 27 80 ef 03 00 00 00 a0 00 00 00 00 46 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2693000 AHCI AtaReq CMD 0xb2693080 (ph 0x4f92080) prd_length 0x0, flags 0x5, base 4f92080 ReadChannelPort4 ch0[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch0[38] ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[10] = 1 CI 0x1 ReadChannelPort4 ch0[10] = 1 IS 0x1 WriteChannelPort4 1 => ch0[10] UniataAhciStatus(0-0): hIS 0x0 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 0 TFD 0x0 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 imp: 0xf & 0x1 AtapiEnableInterrupts_0: 2