Index: boot/bootdata/CMakeLists.txt
===================================================================
--- boot/bootdata/CMakeLists.txt	(revision 65639)
+++ boot/bootdata/CMakeLists.txt	(working copy)
@@ -72,9 +72,6 @@
 add_cd_file(FILE ${CMAKE_CURRENT_SOURCE_DIR}/readme.txt DESTINATION root NO_CAB FOR all)
 add_cd_file(FILE ${CMAKE_CURRENT_SOURCE_DIR}/readme.txt DESTINATION reactos FOR all)
 
-#system.ini
-add_cd_file(FILE ${CMAKE_CURRENT_SOURCE_DIR}/system.ini DESTINATION reactos FOR all)
-
 #freeldr.ini
 add_cd_file(FILE ${CMAKE_CURRENT_SOURCE_DIR}/bootcd.ini DESTINATION root NO_CAB NAME_ON_CD freeldr.ini FOR bootcd regtest)
 add_cd_file(FILE ${CMAKE_CURRENT_SOURCE_DIR}/livecd.ini DESTINATION root NAME_ON_CD freeldr.ini FOR livecd)
===================================================================
--- media/ntvdm/AUTOEXEC.NT	(revision 0)
+++ media/ntvdm/AUTOEXEC.NT	(working copy)
@@ -0,0 +1,30 @@
+@ECHO OFF
+REM Virtual DOS Machine (VDM) Default Environment Configuration
+
+REM NOTE: NTVDM does not use AUTOEXEC.BAT as the default
+REM environment settings file when running a DOS application. If you
+REM wish to change the default settings for DOS programs, make changes
+REM to this file instead.
+
+REM Sound Blaster Settings
+REM ======================
+REM     A = The I/O address of the Sound Blaster.
+REM         * Possible values: 220, 240, 260, 280, 2a0, 2c0, 2e0, 300.
+REM     I = The IRQ number of the Sound Blaster.
+REM         * Possible values: 7, 5, 3, 9, 10, 11, 12.
+REM     D = The DMA number of the Sound Blaster.
+REM         * Possible values: 1, 5, 0, 3, 6, 7.
+REM     H = The High DMA number of the Sound Blaster.
+REM         * Possible values: 1, 5, 0, 3, 6, 7.
+REM     T = Type of Sound Blaster Card
+REM         * 1 - SB 1.5
+REM         * 2 - SB Pro I
+REM         * 3 - SB 2.0
+REM         * 4 - SB Pro II
+REM         * 6 - SB 16/AWE 32/32/64
+REM
+REM     NOTE: To disable Sound Blaster support, simply place an invalid
+REM     I/O Port Address (e.g. SET BLASTER=A0). However, if SET BLASTER is 
+REM     not specified in this file, then the default values (A220 I7 D1 H5 T6)
+REM     will be used instead.
+SET BLASTER=A220 I7 D1 H5 T6
Index: media/ntvdm/CONFIG.NT
===================================================================
--- media/ntvdm/CONFIG.NT	(revision 0)
+++ media/ntvdm/CONFIG.NT	(working copy)
@@ -0,0 +1,65 @@
+REM Virtual DOS Machine (VDM) Default Startup File
+
+REM NOTE: NTVDM does not use CONFIG.BAT as the default
+REM environment settings file when running a DOS application. To
+REM change the default settings for the VDM, change this file
+REM instead. However, if a DOS Shortcut (PIF) is used, then
+REM the settings found in the PIF file will be used instead.
+
+REM Echo Output Option
+REM ==================
+REM     When starting up a DOS application, by default, no output
+REM     text is shown to the user as the application starts
+REM     up. To display information from both CONFIG.NT and
+REM     AUTOEXEC.NT, use the option, 'echoconfig'.
+REM echoconfig
+
+REM Command Prompt Option
+REM =====================
+REM     If the user returns to the Command Prompt either from a TSR,
+REM     or while running a DOS application, by default, VDM runs
+REM     COMMAND.COM. To run cmd.exe instead, use the option, 'ntcmdprompt'.
+REM     However, if COMMAND.COM cannot be found, VDM will use this option
+REM     regardless if it's disabled or not.
+ntcmdprompt
+
+REM DOS-Only Mode
+REM =============
+REM     By default, any DOS application can run another application,
+REM     regardless if it's DOS-based or not. To prevent DOS applications
+REM     from running non-DOS applications, and therefore possibly preventing
+REM     disruption of the TSR, use the option 'dosonly'.
+REM dosonly
+
+REM Expanded Memory Manager (EMM)
+REM =============================
+REM     Syntax = EMM [A=AltRegSets] [B=BaseSegment] [RAM]
+REM
+REM     A = Alternative Mapping Register (AltRegSets)
+REM         * Determines the Alternative Mapping Register Sets supported by the system.
+REM           The supported values goes from 1 to 255.
+REM         * The default value is 8.
+REM     B = Base Segment
+REM         * The default value is 0x4000.
+REM     Random Access Memory (RAM)
+REM         * If used, then only allocate 64kb address space from the Upper Memory
+REM           Block (UMB) for EMM page frames, while allowing the rest (if any) to be
+REM           used by NTVDM for loadhigh and devicehigh commands.
+REM         * By default, all available and possible UMB will be used for page frames.
+REM
+REM     The size of a program's EMM is determined by it's given PIF file. But
+REM     if no PIF file is provided, the default settings will be used (_default.pif).
+REM     But if the size of the given PIF file is zero, then the EMM will be disabled
+REM     and the options below will be ignored.
+REM EMM A=8 B=0x4000 64
+
+REM Disable PC Speaker Audio
+REM ========================
+REM     Disables the playback of PC Speaker Audio.
+REM disablepcspeaker
+
+REM Misc. Configuration Options
+REM ===========================
+REM dos=high, umb
+REM device=%SystemRoot%\System32\himem.sys
+REM files=40
\ No newline at end of file
Index: media/ntvdm/system.ini
===================================================================
--- media/ntvdm/system.ini	(revision 0)
+++ media/ntvdm/system.ini	(working copy)
@@ -0,0 +1,21 @@
+; For 16-bit compatibility
+[driver32]
+msacm.imaadpcm=imaadp32.acm
+msacm.msadpcm=msadp32.acm
+msacm.msg711=msg711.acm
+msacm.msgsm610=msgsm32.acm
+msacm.winemp3=winemp3.acm
+vidc.mrle=msrle32.dll
+vidc.msvc=msvidc32.dll
+vidc.cvid=iccvid.dll
+
+[mci]
+MPEGVideo=mciqtz32.dll
+MPEGVideo2=mciqtz32.dll
+AVIVideo=mciavi32.dll
+CDAudio=mcicda.dll
+Sequencer=mciseq.dll
+vcr=mcivisca.drv
+WaveAudio=mciwave.dll
+
+[386enh]
Index: media/ntvdm/win.ini
===================================================================
--- media/ntvdm/win.ini	(revision 0)
+++ media/ntvdm/win.ini	(working copy)
@@ -0,0 +1,8 @@
+; For 16-bit compatibility
+[fonts]
+[extensions]
+[mci extensions]
+[files]
+[Mail]
+MAPI=1
+[MCI Extensions.BAK]
\ No newline at end of file
Index: media/ntvdm/CMakeLists.txt
===================================================================
--- media/ntvdm/CMakeLists.txt	(revision 0)
+++ media/ntvdm/CMakeLists.txt	(working copy)
@@ -0,0 +1,15 @@
+#NTVDM Default Configuration Files
+list(APPEND NT_FILES
+	AUTOEXEC.NT
+	CONFIG.NT)
+
+foreach(item ${NT_FILES})
+    add_cd_file(FILE "${CMAKE_CURRENT_SOURCE_DIR}/${item}" DESTINATION reactos/system32 FOR all)
+    add_cd_file(FILE "${CMAKE_CURRENT_SOURCE_DIR}/${item}" DESTINATION reactos/repair FOR all)
+endforeach(item)
+
+#win.ini
+add_cd_file(FILE ${CMAKE_CURRENT_SOURCE_DIR}/win.ini DESTINATION reactos FOR all)
+
+#system.ini
+add_cd_file(FILE ${CMAKE_CURRENT_SOURCE_DIR}/system.ini DESTINATION reactos FOR all)
\ No newline at end of file