(ntoskrnl/kd/kdio.c:376) ----------------------------------------------------- (ntoskrnl/kd/kdio.c:377) ReactOS 0.4-SVN (Build 20141031-r65142) (ntoskrnl/kd/kdio.c:379) 1 System Processor [1023 MB Memory] (ntoskrnl/kd/kdio.c:380) Command Line: NOGUIBOOT KDSERIAL DEBUGPORT=COM1 FIRSTCHANCE (ntoskrnl/kd/kdio.c:384) ARC Paths: multi(0)disk(0)cdrom(96) \ multi(0)disk(0)cdrom(96) \reactos\ (ntoskrnl/ke/i386/cpu.c:494) Supported CPU features : KF_V86_VIS KF_RDTSC KF_CR4 KF_CMOV KF_GLOBAL_PAGE KF_LARGE_PAGE KF_MTRR KF_CMPXCHG8B KF_MMX KF_WORKING_PTE KF_PAT KF_FXSR KF_FAST_SYSCALL KF_XMMI KF_3DNOW KF_XMMI64 (ntoskrnl/ke/i386/cpu.c:801) Prefetch Cache: 64 bytes L2 Cache: 524288 bytes L2 Cache Line: 64 bytes L2 Cache Associativity: 16 (ntoskrnl/mm/ARM3/mminit.c:1443) HAL I/O Mapping at FFFE0000 is unsafe (ntoskrnl/mm/mminit.c:260) 0x80000000 - 0x83000000 Boot Loaded Image (ntoskrnl/mm/mminit.c:264) 0xB0000000 - 0xB0700000 PFN Database (ntoskrnl/mm/mminit.c:268) 0xB0700000 - 0xB26D0000 ARM3 Non Paged Pool (ntoskrnl/mm/mminit.c:272) 0xB9400000 - 0xBB400000 System View Space (ntoskrnl/mm/mminit.c:276) 0xBB400000 - 0xC0000000 Session Space (ntoskrnl/mm/mminit.c:279) 0xC0000000 - 0xC03FFFFF Page Tables (ntoskrnl/mm/mminit.c:282) 0xC0300000 - 0xC0300FFF Page Directories (ntoskrnl/mm/mminit.c:285) 0xC0400000 - 0xC07FFFFF Hyperspace (ntoskrnl/mm/mminit.c:289) 0xE1000000 - 0xECC00000 ARM3 Paged Pool (ntoskrnl/mm/mminit.c:292) 0xECC00000 - 0xF7BE0000 System PTE Space (ntoskrnl/mm/mminit.c:295) 0xF7BE0000 - 0xFFBE0000 Non Paged Pool Expansion PTE Space (ntoskrnl/config/cmhvlist.c:158) CmpAddToHiveFileList: Creation or opening of the hive list failed, status = c0000034 (hal/halx86/legacy/bussupp.c:623) Found parent bus (indicating PCI Bridge). PCI devices may fail! ====== PCI BUS HARDWARE DETECTION ======= 00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma] [8086:1237] (rev 02) Subsystem: Unknown [0000:0000] Flags: fast devsel, latency 0 00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] [8086:7000] (rev 00) Subsystem: Unknown [0000:0000] Flags: bus master, medium devsel, latency 0 00:01.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01) Subsystem: Unknown [0000:0000] Flags: bus master, fast devsel, latency 0 I/O ports at d000 [size=4K] 00:02.0 VGA compatible controller [0300]: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter [80ee:beef] (rev 00) Subsystem: Unknown [0000:0000] Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at e0000000 (32-bit, prefetchable) [size=512M] Device is using IRQ 11! ISA Cards using that IRQ may fail! 00:03.0 Ethernet controller [0200]: Advanced Micro Devices, Inc. [AMD] 79c970 [PCnet32 LANCE] [1022:2000] (rev 40) Subsystem: PCnet - Fast 79C971 [1022:2000] Flags: bus master, medium devsel, latency 0, IRQ 10 I/O ports at d020 [size=32] Memory at f0000000 (32-bit, non-prefetchable) [size=256M] Device is using IRQ 10! ISA Cards using that IRQ may fail! 00:04.0 System peripheral [0880]: InnoTek Systemberatung GmbH VirtualBox Guest Service [80ee:cafe] (rev 00) Subsystem: Unknown [0000:0000] Flags: bus master, fast devsel, latency 0, IRQ 09 I/O ports at d040 [size=64] Memory at f0400000 (32-bit, non-prefetchable) [size=4M] Memory at f0800000 (32-bit, prefetchable) [size=8M] Device is using IRQ 9! ISA Cards using that IRQ may fail! 00:05.0 Multimedia audio controller [0401]: Intel Corporation 82801AA AC'97 Audio Controller [8086:2415] (rev 01) Subsystem: Terminator 2x/i [8086:0000] Flags: bus master, medium devsel, latency 0, IRQ 11 I/O ports at d100 [size=256] I/O ports at d200 [size=512] Device is using IRQ 11! ISA Cards using that IRQ may fail! 00:06.0 USB controller [0c03]: Apple Inc. KeyLargo/Intrepid USB [106b:003f] (rev 00) Subsystem: GLoria L [0000:0000] Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at f0804000 (32-bit, non-prefetchable) [size=16K] Device is using IRQ 11! ISA Cards using that IRQ may fail! Device is an OHCI (USB) PCI Expansion Card. Turn off Legacy USB in your BIOS! 00:07.0 Secondary bus towards host CPU [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 08) Subsystem: Unknown [0000:0000] Flags: bus master, medium devsel, latency 0, IRQ 09 Device is using IRQ 9! ISA Cards using that IRQ may fail! 00:0b.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 00) Subsystem: Unknown [0000:0000] Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at f0805000 (32-bit, non-prefetchable) [size=4K] Device is using IRQ 10! ISA Cards using that IRQ may fail! Device is an Intel UHCI (USB) Controller. Turn off Legacy USB in your BIOS! ====== PCI BUS DETECTION COMPLETE ======= PC Compatible Eisa/Isa HAL Detected (ntoskrnl/io/pnpmgr/pnpinit.c:453) Need to build DACL (ntoskrnl/io/pnpmgr/pnpmgr.c:3212) ZwOpenKey(\Registry\Machine\SYSTEM\CURRENTCONTROLSET\Control\Pnp) failed with status 0xc0000034 (ntoskrnl/io/pnpmgr/pnpmgr.c:3215) Firmware mapper is enabled (ntoskrnl/io/pnpmgr/pnpreport.c:353) Reported device: DETECTEDInternal\PCI_HAL (Root\PCI_HAL\0) SAC DriverEntry: Entering. (ntoskrnl/io/iomgr/driver.c:1630) '\Driver\sacdrv' initialization failed, status (0xc0000037) (ntoskrnl/io/iomgr/driver.c:64) Deleting driver object '\Driver\sacdrv' (hal/halx86/legacy/bussupp.c:1159) Slot assignment for 5 on bus 0 (hal/halx86/legacy/bus/pcibus.c:719) WARNING: PCI Slot Resource Assignment is FOOBAR (ntoskrnl/io/iomgr/iorsrce.c:874) IoReportResourceUsage is halfplemented! (ntoskrnl/io/iomgr/iorsrce.c:874) IoReportResourceUsage is halfplemented! (ntoskrnl/io/iomgr/driver.c:1630) '\Driver\buslogic' initialization failed, status (0xc00000c0) (ntoskrnl/io/iomgr/driver.c:64) Deleting driver object '\Driver\buslogic' (ntoskrnl/io/iomgr/driver.c:1630) '\Driver\floppy' initialization failed, status (0xc000000e) (ntoskrnl/io/iomgr/driver.c:64) Deleting driver object '\Driver\floppy' (ntoskrnl/io/iomgr/arcname.c:386) Boot device found (ntoskrnl/ex/init.c:1959) Free non-cache pages: 3c8b6 (base/setup/usetup/interface/devinst.c:95) Using driver 'pci.sys' for device 'PCI_HAL\PNP0A03\0' (ntoskrnl/io/pnpmgr/plugplay.c:635) A new driver will be loaded for 'PCI_HAL\PNP0A03\0' (no FDO above) (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\pci.sys at F784E000 with b pages (hal/halx86/legacy/halpnpdd.c:716) Start device received (ntoskrnl/io/pnpmgr/pnpmgr.c:4057) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (base/setup/usetup/interface/devinst.c:95) Using driver 'i8042prt.sys' for device 'Root\*PNP0303\0000' (base/setup/usetup/interface/devinst.c:147) Installing keyboard class driver for 'Root\*PNP0303\0000' (ntoskrnl/io/pnpmgr/plugplay.c:635) A new driver will be loaded for 'Root\*PNP0303\0000' (no FDO above) (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\i8042prt.sys at F783E000 with 10 pages (drivers/input/i8042prt/pnp.c:752) IRP_MJ_PNP / unknown minor function 0x9 (ntoskrnl/io/pnpmgr/pnproot.c:1198) IRP_MJ_PNP / Unknown minor function 0x14 (ntoskrnl/io/pnpmgr/pnpmgr.c:4057) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (base/setup/usetup/interface/devinst.c:95) Using driver 'pciide.sys' for device 'PCI\VEN_8086&DEV_7111&SUBSYS_00000000&REV_01\2&b3ac4ede&21' (ntoskrnl/io/pnpmgr/plugplay.c:635) A new driver will be loaded for 'PCI\VEN_8086&DEV_7111&SUBSYS_00000000&REV_01\2&b3ac4ede&21' (no FDO above) (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\pciide.sys at F7827000 with 7 pages (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\pciidex.sys at F7836000 with 8 pages (hal/halx86/legacy/bus/pcibus.c:690) HAL: No PCI Resource Adjustment done! Hardware may malfunction (drivers/bus/pci/pdo.c:1289) Enabling command flags for PCI device 0x21 on bus 0x0: [Bus master] [I/O space enable] (drivers/storage/ide/pciidex/fdo.c:467) IRP_MJ_PNP / Unknown minor function 0x9 (base/setup/usetup/interface/devinst.c:95) Using driver 'usbohci.sys' for device 'PCI\VEN_106B&DEV_003F&SUBSYS_00000000&REV_00\2&b3ac4ede&06' (ntoskrnl/io/pnpmgr/plugplay.c:635) A new driver will be loaded for 'PCI\VEN_106B&DEV_003F&SUBSYS_00000000&REV_00\2&b3ac4ede&06' (no FDO above) (lib/drivers/libusb/libusb.cpp:33) USBLIB_AddDevice (hal/halx86/legacy/bus/pcibus.c:690) HAL: No PCI Resource Adjustment done! Hardware may malfunction (drivers/bus/pci/pdo.c:1272) Assigning IRQ 11 to PCI device 0x6 on bus 0x0 (drivers/bus/pci/pdo.c:1289) Enabling command flags for PCI device 0x6 on bus 0x0: [Bus master] [Memory space enable] (drivers/usb/usbohci/hardware.cpp:383) Starting Controller (drivers/usb/usbohci/hardware.cpp:526) Controller State 0 (drivers/usb/usbohci/hardware.cpp:558) Waiting 50 milliseconds for controller to transition state (drivers/usb/usbohci/hardware.cpp:620) FrameInterval 80000000 IntervalValue 2edf (drivers/usb/usbohci/hardware.cpp:622) Computed FrameInterval a7782edf (drivers/usb/usbohci/hardware.cpp:630) Read FrameInterval a7782edf (drivers/usb/usbohci/hardware.cpp:637) Computed Periodic Start 2a2f (drivers/usb/usbohci/hardware.cpp:640) Read Periodic Start 2a2f (drivers/usb/usbohci/hardware.cpp:683) NumberOfPorts 8 (drivers/usb/usbohci/hardware.cpp:704) Descriptor A: 1108 (drivers/usb/usbohci/hardware.cpp:723) Descriptor B: 1fe0000 (drivers/usb/usbohci/hardware.cpp:733) HCCA: 100000 Alignment mask: ffffff00 (drivers/usb/usbohci/hardware.cpp:773) Control 2bf (drivers/usb/usbohci/hardware.cpp:778) OHCI controller is operational (ntoskrnl/io/pnpmgr/pnpmgr.c:4057) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (lib/drivers/libusb/hub_controller.cpp:3938) CHubController::CreatePDO: DeviceName \Device\USBPDO-0 (base/setup/usetup/interface/devinst.c:95) Using driver 'usbehci.sys' for device 'PCI\VEN_8086&DEV_265C&SUBSYS_00000000&REV_00\2&b3ac4ede&0B' (ntoskrnl/io/pnpmgr/plugplay.c:635) A new driver will be loaded for 'PCI\VEN_8086&DEV_265C&SUBSYS_00000000&REV_00\2&b3ac4ede&0B' (no FDO above) (lib/drivers/libusb/libusb.cpp:33) USBLIB_AddDevice (hal/halx86/legacy/bus/pcibus.c:690) HAL: No PCI Resource Adjustment done! Hardware may malfunction (drivers/bus/pci/pdo.c:1272) Assigning IRQ 10 to PCI device 0xb on bus 0x0 (drivers/bus/pci/pdo.c:1289) Enabling command flags for PCI device 0xb on bus 0x0: [Bus master] [Memory space enable] (drivers/usb/usbehci/hardware.cpp:367) Controller Capabilities Length 0x20 (drivers/usb/usbehci/hardware.cpp:368) Controller EHCI Version 0x100 (drivers/usb/usbehci/hardware.cpp:369) Controller EHCI Caps HCSParamsLong 0x8 (drivers/usb/usbehci/hardware.cpp:370) Controller EHCI Caps HCCParamsLong 0x84 (drivers/usb/usbehci/hardware.cpp:371) Controller has 8 Ports (drivers/usb/usbehci/hardware.cpp:256) Controller Port Routing Rules 0 (drivers/usb/usbehci/hardware.cpp:257) Number of Ports per Companion Controller 0 (drivers/usb/usbehci/hardware.cpp:258) Number of Companion Controller 0 (drivers/usb/usbehci/hardware.cpp:277) Controller supports Asynchronous Schedule Park (drivers/usb/usbehci/hardware.cpp:489) Starting Controller (drivers/usb/usbehci/hardware.cpp:714) Interrupt Mask 37 (drivers/usb/usbehci/hardware.cpp:813) UsbSts c000 (drivers/usb/usbehci/hardware.cpp:816) UsbCmd.PeriodicEnable 1 (drivers/usb/usbehci/hardware.cpp:817) UsbCmd.AsyncEnable 1 (drivers/usb/usbehci/hardware.cpp:818) UsbCmd.IntThreshold 8 (base/setup/usetup/partlist.c:1135) SectorCount 20971440 (base/setup/usetup/partlist.c:1136) SectorAlignment 63 (drivers/usb/usbehci/hardware.cpp:819) UsbCmd.Run 1 (drivers/usb/usbehci/hardware.cpp:820) UsbCmd.FrameListSize 0 0: 32256 10737345024 63 1 b * N 1: 0 0 0 0 0 N 2: 0 0 0 0 0 N 3: 0 0 0 0 0 N (base/setup/usetup/partlist.c:1183) Use 63 Sector alignment! (base/setup/usetup/partlist.c:641) ScanForUnpartitionedDiskSpace() (base/setup/usetup/partlist.c:875) ScanForUnpartitionedDiskSpace() done (drivers/usb/usbehci/hardware.cpp:827) EHCI Started! (ntoskrnl/io/pnpmgr/pnpmgr.c:4057) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (lib/drivers/libusb/hub_controller.cpp:3938) CHubController::CreatePDO: DeviceName \Device\USBPDO-1 (base/setup/usetup/interface/devinst.c:95) Using driver 'uniata.sys' for device 'PCIIDE\IDEChannel\3&f85e3f4e&0' (ntoskrnl/io/pnpmgr/plugplay.c:635) A new driver will be loaded for 'PCIIDE\IDEChannel\3&f85e3f4e&0' (no FDO above) (base/setup/usetup/interface/devinst.c:95) Using driver 'uniata.sys' for device 'PCIIDE\IDEChannel\3&f85e3f4e&1' (ntoskrnl/io/pnpmgr/plugplay.c:635) A new driver will be loaded for 'PCIIDE\IDEChannel\3&f85e3f4e&1' (no FDO above) (base/setup/usetup/interface/devinst.c:95) Using driver 'usbhub.sys' for device 'USB\ROOT_HUB\3&798a5049' (ntoskrnl/io/pnpmgr/plugplay.c:635) A new driver will be loaded for 'USB\ROOT_HUB\3&798a5049' (no FDO above) (drivers/usb/usbhub/fdo.c:1641) Status 0, Result 0x00000040 (drivers/usb/usbhub/fdo.c:1642) InformationLevel 0 (drivers/usb/usbhub/fdo.c:1643) ActualLength 40 (drivers/usb/usbhub/fdo.c:1644) PortNumber 0 (drivers/usb/usbhub/fdo.c:1645) DeviceDescriptor 20000112 (drivers/usb/usbhub/fdo.c:1646) HubAddress 0 (drivers/usb/usbhub/fdo.c:1647) NumberofPipes 0 (drivers/usb/usbhub/fdo.c:1740) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 8 (drivers/usb/usbohci/hardware.cpp:1209) Waiting 0 milliseconds for port power up (drivers/usb/usbohci/hardware.cpp:1138) Waiting 100 milliseconds for port to stabilize after connection (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (drivers/usb/usbohci/hardware.cpp:1209) Waiting 0 milliseconds for port power up (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (drivers/usb/usbohci/hardware.cpp:1209) Waiting 0 milliseconds for port power up (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (drivers/usb/usbohci/hardware.cpp:1209) Waiting 0 milliseconds for port power up (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (drivers/usb/usbohci/hardware.cpp:1209) Waiting 0 milliseconds for port power up (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (drivers/usb/usbohci/hardware.cpp:1209) Waiting 0 milliseconds for port power up (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (drivers/usb/usbohci/hardware.cpp:1209) Waiting 0 milliseconds for port power up (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (drivers/usb/usbohci/hardware.cpp:1209) Waiting 0 milliseconds for port power up (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (lib/drivers/libusb/hub_controller.cpp:315) [USBOHCI] SCE Request B242B658 TransferBufferLength 32 Flags 3 MDL 00000000 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 0: Status 1, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 1: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 2: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 3: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 4: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 5: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 6: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 7: Status 0, Change 0 (ntoskrnl/io/pnpmgr/pnpmgr.c:4057) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (drivers/usb/usbohci/hardware.cpp:1395) Disabling status change interrupt (drivers/usb/usbohci/hardware.cpp:1514) Port 0 completed reset (lib/drivers/libusb/hub_controller.cpp:315) [USBOHCI] SCE Request B242B658 TransferBufferLength 32 Flags 3 MDL 00000000 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 0: Status 3, Change 10 (lib/drivers/libusb/hub_controller.cpp:334) [USBOHCI] Change state on port 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 1: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 2: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 3: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 4: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 5: Status 0, Change 0 (drivers/filesystems/fastfat/fsctl.c:615) Mount success (drivers/filesystems/fastfat/create.c:485) Volume opening (drivers/filesystems/fastfat/fsctl.c:869) VfatLockOrUnlockVolume(B2404BC0, 1) (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 6: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 7: Status 0, Change 0 (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (lib/drivers/libusb/hub_controller.cpp:2705) USBHI_CreateUsbDevice (base/setup/usetup/interface/devinst.c:95) Using driver 'usbhub.sys' for device 'USB\ROOT_HUB20\3&eacd1baa' (lib/drivers/libusb/usb_device.cpp:314) [USBOHCI] SetDeviceAddress> Address 1 (ntoskrnl/io/pnpmgr/plugplay.c:635) A new driver will be loaded for 'USB\ROOT_HUB20\3&eacd1baa' (no FDO above) (drivers/usb/usbhub/fdo.c:1641) Status 0, Result 0x00000040 (drivers/usb/usbhub/fdo.c:1642) InformationLevel 0 (lib/drivers/libusb/usb_device.cpp:844) Dumping Device Descriptor B24219B0 (lib/drivers/libusb/usb_device.cpp:845) bLength 12 (lib/drivers/libusb/usb_device.cpp:846) bDescriptorType 1 (lib/drivers/libusb/usb_device.cpp:847) bcdUSB 110 (lib/drivers/libusb/usb_device.cpp:848) bDeviceClass 0 (lib/drivers/libusb/usb_device.cpp:849) bDeviceSubClass 0 (lib/drivers/libusb/usb_device.cpp:850) bDeviceProtocol 0 (lib/drivers/libusb/usb_device.cpp:851) bMaxPacketSize0 8 (lib/drivers/libusb/usb_device.cpp:852) idVendor 80ee (lib/drivers/libusb/usb_device.cpp:853) idProduct 21 (lib/drivers/libusb/usb_device.cpp:854) bcdDevice 100 (lib/drivers/libusb/usb_device.cpp:855) iManufacturer 1 (lib/drivers/libusb/usb_device.cpp:856) iProduct 3 (lib/drivers/libusb/usb_device.cpp:857) iSerialNumber 0 (lib/drivers/libusb/usb_device.cpp:858) bNumConfigurations 1 (drivers/usb/usbhub/fdo.c:1643) ActualLength 40 (drivers/usb/usbhub/fdo.c:1644) PortNumber 0 (drivers/usb/usbhub/fdo.c:1645) DeviceDescriptor 20000112 (drivers/usb/usbhub/fdo.c:1646) HubAddress 0 (lib/drivers/libusb/usb_device.cpp:865) Dumping ConfigurationDescriptor B2410000 (lib/drivers/libusb/usb_device.cpp:866) bLength 9 (lib/drivers/libusb/usb_device.cpp:867) bDescriptorType 2 (lib/drivers/libusb/usb_device.cpp:868) wTotalLength 22 (lib/drivers/libusb/usb_device.cpp:869) bNumInterfaces 1 (lib/drivers/libusb/usb_device.cpp:870) bConfigurationValue 1 (lib/drivers/libusb/usb_device.cpp:871) iConfiguration 0 (lib/drivers/libusb/usb_device.cpp:872) bmAttributes 80 (lib/drivers/libusb/usb_device.cpp:873) MaxPower 32 (drivers/usb/usbhub/fdo.c:782) IsCompositeDevice bNumInterfaces 1 (drivers/usb/usbhub/fdo.c:1647) NumberofPipes 0 (drivers/usb/usbhub/fdo.c:688) StringDesc->bLength 22 (drivers/usb/usbhub/fdo.c:1740) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 8 (lib/drivers/libusb/hub_controller.cpp:315) [USBOHCI] SCE Request B242B658 TransferBufferLength 32 Flags 3 MDL 00000000 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 0: Status 3, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 1: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 2: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 3: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 4: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 5: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 6: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 7: Status 0, Change 0 (drivers/usb/usbhub/pdo.c:539) USB Tablet (drivers/usb/usbhub/pdo.c:539) USB Tablet (lib/drivers/libusb/hub_controller.cpp:315) [USBEHCI] SCE Request B240F8C8 TransferBufferLength 32 Flags 3 MDL 00000000 (lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 0: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 1: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 2: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 3: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 4: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 5: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 6: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 7: Status 100, Change 0 (ntoskrnl/io/pnpmgr/pnpmgr.c:4057) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (base/setup/usetup/interface/devinst.c:95) Using driver 'hidusb.sys' for device 'USB\Vid_80ee&Pid_0021\4&ae981aa1&0000&0001' (ntoskrnl/io/pnpmgr/plugplay.c:635) A new driver will be loaded for 'USB\Vid_80ee&Pid_0021\4&ae981aa1&0000&0001' (no FDO above) (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\hidusb.sys at F7809000 with 9 pages (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\hidclass.sys at F77FD000 with c pages (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\hidparse.sys at F77F1000 with c pages (drivers/usb/usbhub/pdo.c:745) PDO IRP_MJ_PNP / unknown minor function 0xd WARNING: USBHUB_PdoStartDevice at drivers/usb/usbhub/pdo.c:414 is UNIMPLEMENTED! (drivers/usb/usbohci/usb_queue.cpp:667) URB failed with status 0xc0000004 (drivers/usb/usbohci/usb_request.cpp:1831) OHCI_TD_CONDITION_STALL detected in TransferDescriptor TransferDescriptor F78313E0 (lib/drivers/libusb/hub_controller.cpp:2182) [USBOHCI] URB_FUNCTION_CLASS_INTERFACE failed with Urb Status 0 (drivers/hid/hidusb/hidusb.c:1416) Status c0000001 (drivers/usb/usbhub/pdo.c:287) IOCTL_INTERNAL_USB_SUBMIT_URB Function 28 NOT IMPLEMENTED (drivers/usb/usbhub/pdo.c:745) PDO IRP_MJ_PNP / unknown minor function 0x14 (ntoskrnl/io/pnpmgr/pnpmgr.c:4057) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (drivers/filesystems/fastfat/fsctl.c:913) VfatDismountVolume(B2404BC0) WARNING: VfatDismountVolume at drivers/filesystems/fastfat/fsctl.c:922 is UNIMPLEMENTED! (lib/fslib/vfatlib/vfatlib.c:267) Failed to umount volume (Status: 0xc0000002) (drivers/filesystems/fastfat/fsctl.c:869) VfatLockOrUnlockVolume(B2404BC0, 0) (drivers/filesystems/fastfat/close.c:44) Volume (ntoskrnl/ex/init.c:2001) Free non-cache pages: 3c770 (ntoskrnl/mm/ARM3/zeropage.c:50) Free non-cache pages: 3c99f (base/setup/usetup/interface/usetup.c:3479) CHECKPOINT:HALF_COPIED Boot took 48661813840 cycles! Interrupts: 9098 System Calls: 22713 Context Switches: 6913 (ntoskrnl/config/cmcheck.c:25) CmCheckRegistry(0xB2294008, 0) is UNIMPLEMENTED! (ntoskrnl/config/cmcheck.c:25) CmCheckRegistry(0xB2295008, 0) is UNIMPLEMENTED! (drivers/storage/class/disk/disk.c:1553) STATUS_INVALID_PARAMETER (drivers/storage/class/disk/disk.c:1553) STATUS_INVALID_PARAMETER (ntoskrnl/cc/copy.c:99) IoPageRead failed, Status c000000d *** Fatal System Error: 0xc0000218 (0x00040010,0x00000000,0x00000000,0x00000000)  Entered debugger on embedded INT3 at 0x0008:0x8095a318. kdb:> (ntoskrnl/kd/kdio.c:376) ----------------------------------------------------- (ntoskrnl/kd/kdio.c:377) ReactOS 0.4-SVN (Build 20141031-r65142) (ntoskrnl/kd/kdio.c:379) 1 System Processor [1023 MB Memory] (ntoskrnl/kd/kdio.c:380) Command Line: NOGUIBOOT KDSERIAL DEBUGPORT=COM1 FIRSTCHANCE (ntoskrnl/kd/kdio.c:384) ARC Paths: multi(0)disk(0)cdrom(96) \ multi(0)disk(0)cdrom(96) \reactos\ (ntoskrnl/ke/i386/cpu.c:494) Supported CPU features : KF_V86_VIS KF_RDTSC KF_CR4 KF_CMOV KF_GLOBAL_PAGE KF_LARGE_PAGE KF_MTRR KF_CMPXCHG8B KF_MMX KF_WORKING_PTE KF_PAT KF_FXSR KF_FAST_SYSCALL KF_XMMI KF_3DNOW KF_XMMI64 (ntoskrnl/ke/i386/cpu.c:801) Prefetch Cache: 64 bytes L2 Cache: 524288 bytes L2 Cache Line: 64 bytes L2 Cache Associativity: 16 (ntoskrnl/mm/ARM3/mminit.c:1443) HAL I/O Mapping at FFFE0000 is unsafe (ntoskrnl/mm/mminit.c:260) 0x80000000 - 0x83000000 Boot Loaded Image (ntoskrnl/mm/mminit.c:264) 0xB0000000 - 0xB0700000 PFN Database (ntoskrnl/mm/mminit.c:268) 0xB0700000 - 0xB26D0000 ARM3 Non Paged Pool (ntoskrnl/mm/mminit.c:272) 0xB9400000 - 0xBB400000 System View Space (ntoskrnl/mm/mminit.c:276) 0xBB400000 - 0xC0000000 Session Space (ntoskrnl/mm/mminit.c:279) 0xC0000000 - 0xC03FFFFF Page Tables (ntoskrnl/mm/mminit.c:282) 0xC0300000 - 0xC0300FFF Page Directories (ntoskrnl/mm/mminit.c:285) 0xC0400000 - 0xC07FFFFF Hyperspace (ntoskrnl/mm/mminit.c:289) 0xE1000000 - 0xECC00000 ARM3 Paged Pool (ntoskrnl/mm/mminit.c:292) 0xECC00000 - 0xF7BE0000 System PTE Space (ntoskrnl/mm/mminit.c:295) 0xF7BE0000 - 0xFFBE0000 Non Paged Pool Expansion PTE Space (ntoskrnl/config/cmhvlist.c:158) CmpAddToHiveFileList: Creation or opening of the hive list failed, status = c0000034 (hal/halx86/legacy/bussupp.c:623) Found parent bus (indicating PCI Bridge). PCI devices may fail! ====== PCI BUS HARDWARE DETECTION ======= 00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma] [8086:1237] (rev 02) Subsystem: Unknown [0000:0000] Flags: fast devsel, latency 0 00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] [8086:7000] (rev 00) Subsystem: Unknown [0000:0000] Flags: bus master, medium devsel, latency 0 00:01.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01) Subsystem: Unknown [0000:0000] Flags: bus master, fast devsel, latency 0 I/O ports at d000 [size=4K] 00:02.0 VGA compatible controller [0300]: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter [80ee:beef] (rev 00) Subsystem: Unknown [0000:0000] Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at e0000000 (32-bit, prefetchable) [size=512M] Device is using IRQ 11! ISA Cards using that IRQ may fail! 00:03.0 Ethernet controller [0200]: Advanced Micro Devices, Inc. [AMD] 79c970 [PCnet32 LANCE] [1022:2000] (rev 40) Subsystem: PCnet - Fast 79C971 [1022:2000] Flags: bus master, medium devsel, latency 0, IRQ 10 I/O ports at d020 [size=32] Memory at f0000000 (32-bit, non-prefetchable) [size=256M] Device is using IRQ 10! ISA Cards using that IRQ may fail! 00:04.0 System peripheral [0880]: InnoTek Systemberatung GmbH VirtualBox Guest Service [80ee:cafe] (rev 00) Subsystem: Unknown [0000:0000] Flags: bus master, fast devsel, latency 0, IRQ 09 I/O ports at d040 [size=64] Memory at f0400000 (32-bit, non-prefetchable) [size=4M] Memory at f0800000 (32-bit, prefetchable) [size=8M] Device is using IRQ 9! ISA Cards using that IRQ may fail! 00:05.0 Multimedia audio controller [0401]: Intel Corporation 82801AA AC'97 Audio Controller [8086:2415] (rev 01) Subsystem: Terminator 2x/i [8086:0000] Flags: bus master, medium devsel, latency 0, IRQ 11 I/O ports at d100 [size=256] I/O ports at d200 [size=512] Device is using IRQ 11! ISA Cards using that IRQ may fail! 00:06.0 USB controller [0c03]: Apple Inc. KeyLargo/Intrepid USB [106b:003f] (rev 00) Subsystem: GLoria L [0000:0000] Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at f0804000 (32-bit, non-prefetchable) [size=16K] Device is using IRQ 11! ISA Cards using that IRQ may fail! Device is an OHCI (USB) PCI Expansion Card. Turn off Legacy USB in your BIOS! 00:07.0 Secondary bus towards host CPU [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 08) Subsystem: Unknown [0000:0000] Flags: bus master, medium devsel, latency 0, IRQ 09 Device is using IRQ 9! ISA Cards using that IRQ may fail! 00:0b.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 00) Subsystem: Unknown [0000:0000] Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at f0805000 (32-bit, non-prefetchable) [size=4K] Device is using IRQ 10! ISA Cards using that IRQ may fail! Device is an Intel UHCI (USB) Controller. Turn off Legacy USB in your BIOS! ====== PCI BUS DETECTION COMPLETE ======= PC Compatible Eisa/Isa HAL Detected (ntoskrnl/io/pnpmgr/pnpinit.c:453) Need to build DACL (ntoskrnl/io/pnpmgr/pnpmgr.c:3212) ZwOpenKey(\Registry\Machine\SYSTEM\CURRENTCONTROLSET\Control\Pnp) failed with status 0xc0000034 (ntoskrnl/io/pnpmgr/pnpmgr.c:3215) Firmware mapper is enabled (ntoskrnl/io/pnpmgr/pnpreport.c:353) Reported device: DETECTEDInternal\PCI_HAL (Root\PCI_HAL\0) SAC DriverEntry: Entering. (ntoskrnl/io/iomgr/driver.c:1630) '\Driver\sacdrv' initialization failed, status (0xc0000037) (ntoskrnl/io/iomgr/driver.c:64) Deleting driver object '\Driver\sacdrv' (hal/halx86/legacy/bussupp.c:1159) Slot assignment for 5 on bus 0 (hal/halx86/legacy/bus/pcibus.c:719) WARNING: PCI Slot Resource Assignment is FOOBAR (ntoskrnl/io/iomgr/iorsrce.c:874) IoReportResourceUsage is halfplemented! (ntoskrnl/io/iomgr/iorsrce.c:874) IoReportResourceUsage is halfplemented! (ntoskrnl/io/iomgr/driver.c:1630) '\Driver\buslogic' initialization failed, status (0xc00000c0) (ntoskrnl/io/iomgr/driver.c:64) Deleting driver object '\Driver\buslogic' (ntoskrnl/io/iomgr/driver.c:1630) '\Driver\floppy' initialization failed, status (0xc000000e) (ntoskrnl/io/iomgr/driver.c:64) Deleting driver object '\Driver\floppy' (ntoskrnl/io/iomgr/arcname.c:386) Boot device found (ntoskrnl/ex/init.c:1959) Free non-cache pages: 3c8b7 (base/setup/usetup/interface/devinst.c:95) Using driver 'pci.sys' for device 'PCI_HAL\PNP0A03\0' (ntoskrnl/io/pnpmgr/plugplay.c:635) A new driver will be loaded for 'PCI_HAL\PNP0A03\0' (no FDO above) (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\pci.sys at F783E000 with b pages (hal/halx86/legacy/halpnpdd.c:716) Start device received (ntoskrnl/io/pnpmgr/pnpmgr.c:4057) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (base/setup/usetup/interface/devinst.c:95) Using driver 'i8042prt.sys' for device 'Root\*PNP0303\0000' (base/setup/usetup/interface/devinst.c:147) Installing keyboard class driver for 'Root\*PNP0303\0000' (ntoskrnl/io/pnpmgr/plugplay.c:635) A new driver will be loaded for 'Root\*PNP0303\0000' (no FDO above) (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\i8042prt.sys at F7849000 with 10 pages (drivers/input/i8042prt/pnp.c:752) IRP_MJ_PNP / unknown minor function 0x9 (ntoskrnl/io/pnpmgr/pnproot.c:1198) IRP_MJ_PNP / Unknown minor function 0x14 (ntoskrnl/io/pnpmgr/pnpmgr.c:4057) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (base/setup/usetup/interface/devinst.c:95) Using driver 'pciide.sys' for device 'PCI\VEN_8086&DEV_7111&SUBSYS_00000000&REV_01\2&b3ac4ede&21' (ntoskrnl/io/pnpmgr/plugplay.c:635) A new driver will be loaded for 'PCI\VEN_8086&DEV_7111&SUBSYS_00000000&REV_01\2&b3ac4ede&21' (no FDO above) (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\pciide.sys at F7837000 with 7 pages (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\pciidex.sys at F782F000 with 8 pages (hal/halx86/legacy/bus/pcibus.c:690) HAL: No PCI Resource Adjustment done! Hardware may malfunction (drivers/bus/pci/pdo.c:1289) Enabling command flags for PCI device 0x21 on bus 0x0: [Bus master] [I/O space enable] (drivers/storage/ide/pciidex/fdo.c:467) IRP_MJ_PNP / Unknown minor function 0x9 (base/setup/usetup/interface/devinst.c:95) Using driver 'usbohci.sys' for device 'PCI\VEN_106B&DEV_003F&SUBSYS_00000000&REV_00\2&b3ac4ede&06' (ntoskrnl/io/pnpmgr/plugplay.c:635) A new driver will be loaded for 'PCI\VEN_106B&DEV_003F&SUBSYS_00000000&REV_00\2&b3ac4ede&06' (no FDO above) (lib/drivers/libusb/libusb.cpp:33) USBLIB_AddDevice (hal/halx86/legacy/bus/pcibus.c:690) HAL: No PCI Resource Adjustment done! Hardware may malfunction (drivers/bus/pci/pdo.c:1272) Assigning IRQ 11 to PCI device 0x6 on bus 0x0 (drivers/bus/pci/pdo.c:1289) Enabling command flags for PCI device 0x6 on bus 0x0: [Bus master] [Memory space enable] (drivers/usb/usbohci/hardware.cpp:383) Starting Controller (drivers/usb/usbohci/hardware.cpp:526) Controller State 0 (drivers/usb/usbohci/hardware.cpp:558) Waiting 50 milliseconds for controller to transition state (drivers/usb/usbohci/hardware.cpp:620) FrameInterval 80000000 IntervalValue 2edf (drivers/usb/usbohci/hardware.cpp:622) Computed FrameInterval a7782edf (drivers/usb/usbohci/hardware.cpp:630) Read FrameInterval a7782edf (drivers/usb/usbohci/hardware.cpp:637) Computed Periodic Start 2a2f (drivers/usb/usbohci/hardware.cpp:640) Read Periodic Start 2a2f (drivers/usb/usbohci/hardware.cpp:683) NumberOfPorts 8 (drivers/usb/usbohci/hardware.cpp:704) Descriptor A: 1108 (drivers/usb/usbohci/hardware.cpp:723) Descriptor B: 1fe0000 (drivers/usb/usbohci/hardware.cpp:733) HCCA: 100000 Alignment mask: ffffff00 (drivers/usb/usbohci/hardware.cpp:773) Control 2bf (drivers/usb/usbohci/hardware.cpp:778) OHCI controller is operational (ntoskrnl/io/pnpmgr/pnpmgr.c:4057) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (lib/drivers/libusb/hub_controller.cpp:3938) CHubController::CreatePDO: DeviceName \Device\USBPDO-0 (base/setup/usetup/interface/devinst.c:95) Using driver 'usbehci.sys' for device 'PCI\VEN_8086&DEV_265C&SUBSYS_00000000&REV_00\2&b3ac4ede&0B' (ntoskrnl/io/pnpmgr/plugplay.c:635) A new driver will be loaded for 'PCI\VEN_8086&DEV_265C&SUBSYS_00000000&REV_00\2&b3ac4ede&0B' (no FDO above) (lib/drivers/libusb/libusb.cpp:33) USBLIB_AddDevice (hal/halx86/legacy/bus/pcibus.c:690) HAL: No PCI Resource Adjustment done! Hardware may malfunction (drivers/bus/pci/pdo.c:1272) Assigning IRQ 10 to PCI device 0xb on bus 0x0 (drivers/bus/pci/pdo.c:1289) Enabling command flags for PCI device 0xb on bus 0x0: [Bus master] [Memory space enable] (drivers/usb/usbehci/hardware.cpp:367) Controller Capabilities Length 0x20 (drivers/usb/usbehci/hardware.cpp:368) Controller EHCI Version 0x100 (drivers/usb/usbehci/hardware.cpp:369) Controller EHCI Caps HCSParamsLong 0x8 (drivers/usb/usbehci/hardware.cpp:370) Controller EHCI Caps HCCParamsLong 0x84 (drivers/usb/usbehci/hardware.cpp:371) Controller has 8 Ports (drivers/usb/usbehci/hardware.cpp:256) Controller Port Routing Rules 0 (drivers/usb/usbehci/hardware.cpp:257) Number of Ports per Companion Controller 0 (drivers/usb/usbehci/hardware.cpp:258) Number of Companion Controller 0 (drivers/usb/usbehci/hardware.cpp:277) Controller supports Asynchronous Schedule Park (drivers/usb/usbehci/hardware.cpp:489) Starting Controller (drivers/usb/usbehci/hardware.cpp:714) Interrupt Mask 37 (drivers/usb/usbehci/hardware.cpp:808) Failed to enable async schedule UsbSts 6000 (ntoskrnl/io/pnpmgr/pnpmgr.c:4057) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (lib/drivers/libusb/hub_controller.cpp:3938) CHubController::CreatePDO: DeviceName \Device\USBPDO-1 (base/setup/usetup/interface/devinst.c:95) Using driver 'uniata.sys' for device 'PCIIDE\IDEChannel\3&f85e3f4e&0' (ntoskrnl/io/pnpmgr/plugplay.c:635) A new driver will be loaded for 'PCIIDE\IDEChannel\3&f85e3f4e&0' (no FDO above) (base/setup/usetup/interface/devinst.c:95) Using driver 'uniata.sys' for device 'PCIIDE\IDEChannel\3&f85e3f4e&1' (ntoskrnl/io/pnpmgr/plugplay.c:635) A new driver will be loaded for 'PCIIDE\IDEChannel\3&f85e3f4e&1' (no FDO above) (base/setup/usetup/interface/devinst.c:95) Using driver 'usbhub.sys' for device 'USB\ROOT_HUB\3&798a5049' (ntoskrnl/io/pnpmgr/plugplay.c:635) A new driver will be loaded for 'USB\ROOT_HUB\3&798a5049' (no FDO above) (drivers/usb/usbhub/fdo.c:1641) Status 0, Result 0x00000040 (drivers/usb/usbhub/fdo.c:1642) InformationLevel 0 (drivers/usb/usbhub/fdo.c:1643) ActualLength 40 (drivers/usb/usbhub/fdo.c:1644) PortNumber 0 (drivers/usb/usbhub/fdo.c:1645) DeviceDescriptor 20000112 (drivers/usb/usbhub/fdo.c:1646) HubAddress 0 (drivers/usb/usbhub/fdo.c:1647) NumberofPipes 0 (drivers/usb/usbhub/fdo.c:1740) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 8 (drivers/usb/usbohci/hardware.cpp:1209) Waiting 0 milliseconds for port power up (drivers/usb/usbohci/hardware.cpp:1138) Waiting 100 milliseconds for port to stabilize after connection (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (drivers/usb/usbohci/hardware.cpp:1209) Waiting 0 milliseconds for port power up (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (drivers/usb/usbohci/hardware.cpp:1209) Waiting 0 milliseconds for port power up (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (drivers/usb/usbohci/hardware.cpp:1209) Waiting 0 milliseconds for port power up (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (drivers/usb/usbohci/hardware.cpp:1209) Waiting 0 milliseconds for port power up (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (drivers/usb/usbohci/hardware.cpp:1209) Waiting 0 milliseconds for port power up (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (drivers/usb/usbohci/hardware.cpp:1209) Waiting 0 milliseconds for port power up (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (drivers/usb/usbohci/hardware.cpp:1209) Waiting 0 milliseconds for port power up (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (lib/drivers/libusb/hub_controller.cpp:315) [USBOHCI] SCE Request B242B658 TransferBufferLength 32 Flags 3 MDL 00000000 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 0: Status 1, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 1: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 2: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 3: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 4: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 5: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 6: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 7: Status 0, Change 0 (ntoskrnl/io/pnpmgr/pnpmgr.c:4057) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (drivers/usb/usbohci/hardware.cpp:1395) Disabling status change interrupt (drivers/usb/usbohci/hardware.cpp:1514) Port 0 completed reset (lib/drivers/libusb/hub_controller.cpp:315) [USBOHCI] SCE Request B242B658 TransferBufferLength 32 Flags 3 MDL 00000000 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 0: Status 3, Change 10 (lib/drivers/libusb/hub_controller.cpp:334) [USBOHCI] Change state on port 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 1: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 2: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 3: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 4: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 5: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 6: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 7: Status 0, Change 0 (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (lib/drivers/libusb/hub_controller.cpp:2705) USBHI_CreateUsbDevice (base/setup/usetup/interface/devinst.c:95) Using driver 'usbhub.sys' for device 'USB\ROOT_HUB20\3&eacd1baa' (lib/drivers/libusb/usb_device.cpp:314) [USBOHCI] SetDeviceAddress> Address 1 (base/setup/usetup/partlist.c:1135) SectorCount 20971440 (base/setup/usetup/partlist.c:1136) SectorAlignment 63 0: 32256 10737345024 63 1 b * N 1: 0 0 0 0 0 N 2: 0 0 0 0 0 N 3: 0 0 0 0 0 N (base/setup/usetup/partlist.c:1183) Use 63 Sector alignment! (base/setup/usetup/partlist.c:641) ScanForUnpartitionedDiskSpace() (base/setup/usetup/partlist.c:875) ScanForUnpartitionedDiskSpace() done (ntoskrnl/io/pnpmgr/plugplay.c:635) A new driver will be loaded for 'USB\ROOT_HUB20\3&eacd1baa' (no FDO above) (lib/drivers/libusb/usb_device.cpp:844) Dumping Device Descriptor B241ABC0 (lib/drivers/libusb/usb_device.cpp:845) bLength 12 (lib/drivers/libusb/usb_device.cpp:846) bDescriptorType 1 (lib/drivers/libusb/usb_device.cpp:847) bcdUSB 110 (lib/drivers/libusb/usb_device.cpp:848) bDeviceClass 0 (lib/drivers/libusb/usb_device.cpp:849) bDeviceSubClass 0 (lib/drivers/libusb/usb_device.cpp:850) bDeviceProtocol 0 (lib/drivers/libusb/usb_device.cpp:851) bMaxPacketSize0 8 (lib/drivers/libusb/usb_device.cpp:852) idVendor 80ee (lib/drivers/libusb/usb_device.cpp:853) idProduct 21 (lib/drivers/libusb/usb_device.cpp:854) bcdDevice 100 (lib/drivers/libusb/usb_device.cpp:855) iManufacturer 1 (lib/drivers/libusb/usb_device.cpp:856) iProduct 3 (lib/drivers/libusb/usb_device.cpp:857) iSerialNumber 0 (lib/drivers/libusb/usb_device.cpp:858) bNumConfigurations 1 (drivers/usb/usbhub/fdo.c:1641) Status 0, Result 0x00000040 (drivers/usb/usbhub/fdo.c:1642) InformationLevel 0 (lib/drivers/libusb/usb_device.cpp:865) Dumping ConfigurationDescriptor B240F000 (lib/drivers/libusb/usb_device.cpp:866) bLength 9 (lib/drivers/libusb/usb_device.cpp:867) bDescriptorType 2 (lib/drivers/libusb/usb_device.cpp:868) wTotalLength 22 (lib/drivers/libusb/usb_device.cpp:869) bNumInterfaces 1 (lib/drivers/libusb/usb_device.cpp:870) bConfigurationValue 1 (lib/drivers/libusb/usb_device.cpp:871) iConfiguration 0 (lib/drivers/libusb/usb_device.cpp:872) bmAttributes 80 (lib/drivers/libusb/usb_device.cpp:873) MaxPower 32 (drivers/usb/usbhub/fdo.c:782) IsCompositeDevice bNumInterfaces 1 (drivers/usb/usbhub/fdo.c:1643) ActualLength 40 (drivers/usb/usbhub/fdo.c:1644) PortNumber 0 (drivers/usb/usbhub/fdo.c:688) StringDesc->bLength 22 (drivers/usb/usbhub/fdo.c:1645) DeviceDescriptor 20000112 (lib/drivers/libusb/hub_controller.cpp:315) [USBOHCI] SCE Request B242B658 TransferBufferLength 32 Flags 3 MDL 00000000 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 0: Status 3, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 1: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 2: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 3: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 4: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 5: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 6: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 7: Status 0, Change 0 (drivers/usb/usbhub/pdo.c:539) USB Tablet (drivers/usb/usbhub/pdo.c:539) USB Tablet (drivers/usb/usbhub/fdo.c:1646) HubAddress 0 (drivers/usb/usbhub/fdo.c:1647) NumberofPipes 0 (drivers/usb/usbhub/fdo.c:1740) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 8 (lib/drivers/libusb/hub_controller.cpp:315) [USBEHCI] SCE Request B2404A78 TransferBufferLength 32 Flags 3 MDL 00000000 (lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 0: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 1: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 2: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 3: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 4: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 5: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 6: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 7: Status 100, Change 0 (drivers/filesystems/fastfat/fsctl.c:615) Mount success (drivers/filesystems/fastfat/create.c:485) Volume opening (drivers/filesystems/fastfat/fsctl.c:869) VfatLockOrUnlockVolume(B24104A0, 1) (ntoskrnl/io/pnpmgr/pnpmgr.c:4057) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (base/setup/usetup/interface/devinst.c:95) Using driver 'hidusb.sys' for device 'USB\Vid_80ee&Pid_0021\4&ae981aa1&0000&0001' (ntoskrnl/io/pnpmgr/plugplay.c:635) A new driver will be loaded for 'USB\Vid_80ee&Pid_0021\4&ae981aa1&0000&0001' (no FDO above) (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\hidusb.sys at F780B000 with 9 pages (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\hidclass.sys at F77FF000 with c pages (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\hidparse.sys at F77F3000 with c pages (drivers/usb/usbhub/pdo.c:745) PDO IRP_MJ_PNP / unknown minor function 0xd WARNING: USBHUB_PdoStartDevice at drivers/usb/usbhub/pdo.c:414 is UNIMPLEMENTED! (drivers/usb/usbohci/usb_queue.cpp:667) URB failed with status 0xc0000004 (drivers/usb/usbohci/usb_request.cpp:1831) OHCI_TD_CONDITION_STALL detected in TransferDescriptor TransferDescriptor F782A3E0 (lib/drivers/libusb/hub_controller.cpp:2182) [USBOHCI] URB_FUNCTION_CLASS_INTERFACE failed with Urb Status 0 (drivers/hid/hidusb/hidusb.c:1416) Status c0000001 (drivers/usb/usbhub/pdo.c:287) IOCTL_INTERNAL_USB_SUBMIT_URB Function 28 NOT IMPLEMENTED (drivers/usb/usbhub/pdo.c:745) PDO IRP_MJ_PNP / unknown minor function 0x14 (ntoskrnl/io/pnpmgr/pnpmgr.c:4057) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (drivers/filesystems/fastfat/fsctl.c:913) VfatDismountVolume(B24104A0) WARNING: VfatDismountVolume at drivers/filesystems/fastfat/fsctl.c:922 is UNIMPLEMENTED! (lib/fslib/vfatlib/vfatlib.c:267) Failed to umount volume (Status: 0xc0000002) (drivers/filesystems/fastfat/fsctl.c:869) VfatLockOrUnlockVolume(B24104A0, 0) (drivers/filesystems/fastfat/close.c:44) Volume (ntoskrnl/ex/init.c:2001) Free non-cache pages: 3c77d (ntoskrnl/mm/ARM3/zeropage.c:50) Free non-cache pages: 3c9ac (base/setup/usetup/interface/usetup.c:3479) CHECKPOINT:HALF_COPIED Boot took 50855239749 cycles! Interrupts: 9118 System Calls: 22010 Context Switches: 6989 (base/setup/usetup/bootsup.c:2240) No or unknown boot loader found (drivers/filesystems/fastfat/create.c:485) Volume opening (drivers/filesystems/fastfat/close.c:44) Volume (drivers/filesystems/fastfat/create.c:485) Volume opening (drivers/filesystems/fastfat/close.c:44) Volume (drivers/filesystems/fastfat/create.c:485) Volume opening (drivers/filesystems/fastfat/close.c:44) Volume (ntoskrnl/ex/shutdown.c:45) Setting state to: 5 (ntoskrnl/po/power.c:844) Stopping lazy flush (ntoskrnl/po/power.c:852) Notifying callbacks (ntoskrnl/po/power.c:856) Swapping worker threads (ntoskrnl/po/power.c:896) Flushing volumes, cache flushed 3584 pages (ntoskrnl/po/povolume.c:250) Opening registry (ntoskrnl/po/povolume.c:260) Flushing registry WARNING: HvpWriteLog at lib/cmlib/hivewrt.c:26 is UNIMPLEMENTED! WARNING: HvpWriteLog at lib/cmlib/hivewrt.c:26 is UNIMPLEMENTED! WARNING: HvpWriteLog at lib/cmlib/hivewrt.c:26 is UNIMPLEMENTED! WARNING: HvpWriteLog at lib/cmlib/hivewrt.c:26 is UNIMPLEMENTED! WARNING: HvpWriteLog at lib/cmlib/hivewrt.c:26 is UNIMPLEMENTED! WARNING: HvpWriteLog at lib/cmlib/hivewrt.c:26 is UNIMPLEMENTED! WARNING: HvpWriteLog at lib/cmlib/hivewrt.c:26 is UNIMPLEMENTED! (ntoskrnl/po/povolume.c:330) Creating flush thread (ntoskrnl/po/povolume.c:350) Local flush (ntoskrnl/po/povolume.c:188) Opening: \Device\Harddisk0\Partition0 (ntoskrnl/po/povolume.c:208) Sending flush to: 80000128 (ntoskrnl/po/povolume.c:188) Opening: \Device\Harddisk0\Partition1 (drivers/filesystems/fastfat/create.c:485) Volume opening (ntoskrnl/po/povolume.c:208) Sending flush to: 8000012C (drivers/filesystems/fastfat/close.c:44) Volume (ntoskrnl/po/povolume.c:354) Waiting for flushes (ntoskrnl/po/povolume.c:356) Flushes have completed (ntoskrnl/po/power.c:903) Queueing shutdown thread (ntoskrnl/po/poshtdwn.c:259) smss.exe is still RUNNING (00000050) (ntoskrnl/po/poshtdwn.c:267) HAL shutting down (ntoskrnl/po/poshtdwn.c:271) I/O manager shutting down in phase 0 (ntoskrnl/po/poshtdwn.c:275) Configuration Manager shutting down WARNING: HvpWriteLog at lib/cmlib/hivewrt.c:26 is UNIMPLEMENTED! WARNING: HvpWriteLog at lib/cmlib/hivewrt.c:26 is UNIMPLEMENTED! (ntoskrnl/po/poshtdwn.c:286) I/O manager shutting down in phase 1 WARNING: CcWaitForCurrentLazyWriterActivity at ntoskrnl/cc/copy.c:453 is UNIMPLEMENTED! (ntoskrnl/po/poshtdwn.c:293) Disabling wake timers (ntoskrnl/po/poshtdwn.c:297) Taking the system down (ntoskrnl/po/poshtdwn.c:194) It's the final countdown...5 (ntoskrnl/po/power.c:234) No system power driver available (hal/halx86/legacy/halpnpdd.c:823) HAL: PnP Driver Power! (ntoskrnl/po/power.c:178) Device 'PCI\VEN_8086&DEV_1237&SUBSYS_00000000&REV_02\2&b3ac4ede&00' failed IRP_MN_QUERY_POWER (ntoskrnl/po/power.c:178) Device 'PCI\VEN_8086&DEV_7000&SUBSYS_00000000&REV_00\2&b3ac4ede&01' failed IRP_MN_QUERY_POWER (ntoskrnl/po/power.c:178) Device 'PCI\VEN_8086&DEV_7111&SUBSYS_00000000&REV_01\2&b3ac4ede&21' failed IRP_MN_QUERY_POWER (ntoskrnl/po/power.c:178) Device 'PCI\VEN_80EE&DEV_BEEF&SUBSYS_00000000&REV_00\2&b3ac4ede&02' failed IRP_MN_QUERY_POWER (ntoskrnl/po/power.c:178) Device 'PCI\VEN_1022&DEV_2000&SUBSYS_20001022&REV_40\2&b3ac4ede&03' failed IRP_MN_QUERY_POWER (ntoskrnl/po/power.c:178) Device 'PCI\VEN_80EE&DEV_CAFE&SUBSYS_00000000&REV_00\2&b3ac4ede&04' failed IRP_MN_QUERY_POWER (ntoskrnl/po/power.c:178) Device 'PCI\VEN_8086&DEV_2415&SUBSYS_00008086&REV_01\2&b3ac4ede&05' failed IRP_MN_QUERY_POWER (ntoskrnl/po/power.c:178) Device 'PCI\VEN_106B&DEV_003F&SUBSYS_00000000&REV_00\2&b3ac4ede&06' failed IRP_MN_QUERY_POWER WARNING: PoStartNextPowerIrp at ntoskrnl/po/power.c:619 is UNIMPLEMENTED! (drivers/usb/usbhub/usbhub.c:193) Power Function 3 WARNING: PoStartNextPowerIrp at ntoskrnl/po/power.c:619 is UNIMPLEMENTED! WARNING: PoStartNextPowerIrp at ntoskrnl/po/power.c:619 is UNIMPLEMENTED! (ntoskrnl/po/power.c:178) Device 'PCI\VEN_8086&DEV_7113&SUBSYS_00000000&REV_08\2&b3ac4ede&07' failed IRP_MN_QUERY_POWER (ntoskrnl/po/power.c:178) Device 'PCI\VEN_8086&DEV_265C&SUBSYS_00000000&REV_00\2&b3ac4ede&0B' failed IRP_MN_QUERY_POWER WARNING: PoStartNextPowerIrp at ntoskrnl/po/power.c:619 is UNIMPLEMENTED! (ntoskrnl/po/power.c:178) Device 'Root\*PNP0303\0000' failed IRP_MN_QUERY_POWER (ntoskrnl/po/power.c:178) Device 'Root\*PNP0501\0000' failed IRP_MN_QUERY_POWER (ntoskrnl/po/power.c:178) Device 'Root\*PNP0F13\0000' failed IRP_MN_QUERY_POWER (hal/halx86/legacy/halpnpdd.c:823) HAL: PnP Driver Power! (ntoskrnl/po/power.c:211) Device 'PCI\VEN_8086&DEV_1237&SUBSYS_00000000&REV_02\2&b3ac4ede&00' failed IRP_MN_SET_POWER (ntoskrnl/po/power.c:211) Device 'PCI\VEN_8086&DEV_7000&SUBSYS_00000000&REV_00\2&b3ac4ede&01' failed IRP_MN_SET_POWER (ntoskrnl/po/power.c:211) Device 'PCI\VEN_8086&DEV_7111&SUBSYS_00000000&REV_01\2&b3ac4ede&21' failed IRP_MN_SET_POWER (ntoskrnl/po/power.c:211) Device 'PCI\VEN_80EE&DEV_BEEF&SUBSYS_00000000&REV_00\2&b3ac4ede&02' failed IRP_MN_SET_POWER (ntoskrnl/po/power.c:211) Device 'PCI\VEN_1022&DEV_2000&SUBSYS_20001022&REV_40\2&b3ac4ede&03' failed IRP_MN_SET_POWER (ntoskrnl/po/power.c:211) Device 'PCI\VEN_80EE&DEV_CAFE&SUBSYS_00000000&REV_00\2&b3ac4ede&04' failed IRP_MN_SET_POWER (ntoskrnl/po/power.c:211) Device 'PCI\VEN_8086&DEV_2415&SUBSYS_00008086&REV_01\2&b3ac4ede&05' failed IRP_MN_SET_POWER (ntoskrnl/po/power.c:211) Device 'PCI\VEN_106B&DEV_003F&SUBSYS_00000000&REV_00\2&b3ac4ede&06' failed IRP_MN_SET_POWER WARNING: PoStartNextPowerIrp at ntoskrnl/po/power.c:619 is UNIMPLEMENTED! (drivers/usb/usbhub/usbhub.c:193) Power Function 2 WARNING: PoStartNextPowerIrp at ntoskrnl/po/power.c:619 is UNIMPLEMENTED! WARNING: PoStartNextPowerIrp at ntoskrnl/po/power.c:619 is UNIMPLEMENTED! (ntoskrnl/po/power.c:211) Device 'PCI\VEN_8086&DEV_7113&SUBSYS_00000000&REV_08\2&b3ac4ede&07' failed IRP_MN_SET_POWER (ntoskrnl/po/power.c:211) Device 'PCI\VEN_8086&DEV_265C&SUBSYS_00000000&REV_00\2&b3ac4ede&0B' failed IRP_MN_SET_POWER WARNING: PoStartNextPowerIrp at ntoskrnl/po/power.c:619 is UNIMPLEMENTED! (ntoskrnl/po/power.c:211) Device 'Root\*PNP0303\0000' failed IRP_MN_SET_POWER (ntoskrnl/po/power.c:211) Device 'Root\*PNP0501\0000' failed IRP_MN_SET_POWER (ntoskrnl/po/power.c:211) Device 'Root\*PNP0F13\0000' failed IRP_MN_SET_POWER (ntoskrnl/kd/kdio.c:376) ----------------------------------------------------- (ntoskrnl/kd/kdio.c:377) ReactOS 0.4-SVN (Build 20141031-r65142) (ntoskrnl/kd/kdio.c:379) 1 System Processor [1023 MB Memory] (ntoskrnl/kd/kdio.c:380) Command Line: DEBUG DEBUGPORT=COM1 BAUDRATE=115200 SOS (ntoskrnl/kd/kdio.c:384) ARC Paths: multi(0)disk(0)rdisk(0)partition(1) \ multi(0)disk(0)rdisk(0)partition(1) \ReactOS\ (ntoskrnl/ke/i386/cpu.c:494) Supported CPU features : KF_V86_VIS KF_RDTSC KF_CR4 KF_CMOV KF_GLOBAL_PAGE KF_LARGE_PAGE KF_MTRR KF_CMPXCHG8B KF_MMX KF_WORKING_PTE KF_PAT KF_FXSR KF_FAST_SYSCALL KF_XMMI KF_3DNOW KF_XMMI64 (ntoskrnl/ke/i386/cpu.c:801) Prefetch Cache: 64 bytes L2 Cache: 524288 bytes L2 Cache Line: 64 bytes L2 Cache Associativity: 16 (hal/halx86/acpi/halacpi.c:782) ACPI Timer at: 4008h (EXT: 256) (hal/halx86/acpi/halacpi.c:890) ACPI 2.0 Detected. Tables: [RSDT] [FACP] (ntoskrnl/mm/ARM3/mminit.c:1443) HAL I/O Mapping at FFFE0000 is unsafe (ntoskrnl/mm/mminit.c:260) 0x80000000 - 0x83000000 Boot Loaded Image (ntoskrnl/mm/mminit.c:264) 0xB0000000 - 0xB0700000 PFN Database (ntoskrnl/mm/mminit.c:268) 0xB0700000 - 0xB26D0000 ARM3 Non Paged Pool (ntoskrnl/mm/mminit.c:272) 0xB9400000 - 0xBB400000 System View Space (ntoskrnl/mm/mminit.c:276) 0xBB400000 - 0xC0000000 Session Space (ntoskrnl/mm/mminit.c:279) 0xC0000000 - 0xC03FFFFF Page Tables (ntoskrnl/mm/mminit.c:282) 0xC0300000 - 0xC0300FFF Page Directories (ntoskrnl/mm/mminit.c:285) 0xC0400000 - 0xC07FFFFF Hyperspace (ntoskrnl/mm/mminit.c:289) 0xE1000000 - 0xECC00000 ARM3 Paged Pool (ntoskrnl/mm/mminit.c:292) 0xECC00000 - 0xF7BE0000 System PTE Space (ntoskrnl/mm/mminit.c:295) 0xF7BE0000 - 0xFFBE0000 Non Paged Pool Expansion PTE Space (ntoskrnl/config/cmcheck.c:25) CmCheckRegistry(0xB2677008, 2) is UNIMPLEMENTED! ACPI Compatible Eisa/Isa HAL Detected (ntoskrnl/io/pnpmgr/pnpmgr.c:3215) Firmware mapper is disabled (ntoskrnl/io/pnpmgr/pnpreport.c:353) Reported device: DETECTEDInternal\ACPI_HAL (Root\ACPI_HAL\0) SAC DriverEntry: Entering. (ntoskrnl/io/iomgr/driver.c:1630) '\Driver\SACDRV' initialization failed, status (0xc0000037) (ntoskrnl/io/iomgr/driver.c:64) Deleting driver object '\Driver\SACDRV' (hal/halx86/legacy/bus/pcibus.c:719) WARNING: PCI Slot Resource Assignment is FOOBAR (ntoskrnl/io/iomgr/iorsrce.c:874) IoReportResourceUsage is halfplemented! (ntoskrnl/io/iomgr/iorsrce.c:874) IoReportResourceUsage is halfplemented! (ntoskrnl/io/iomgr/driver.c:1630) '\Driver\BUSLOGIC' initialization failed, status (0xc00000c0) (ntoskrnl/io/iomgr/driver.c:64) Deleting driver object '\Driver\BUSLOGIC' (drivers/bus/acpi/busmgr/bus.c:1638) acpi_bus_init (drivers/bus/acpi/busmgr/bus.c:1197) Using HPET hack (drivers/bus/acpi/acpienum.c:66) Detected duplicate device: PNP0C0F 0 (drivers/bus/acpi/acpienum.c:66) Detected duplicate device: PNP0C0F 0 (drivers/bus/acpi/acpienum.c:66) Detected duplicate device: PNP0C0F 0 (ntoskrnl/io/pnpmgr/pnpmgr.c:4057) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (ntoskrnl/io/pnpmgr/pnpmgr.c:4057) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (drivers/bus/pci/pdo.c:1289) Enabling command flags for PCI device 0x21 on bus 0x0: [Bus master] [I/O space enable] (drivers/storage/ide/pciidex/fdo.c:467) IRP_MJ_PNP / Unknown minor function 0x9 (ntoskrnl/mm/ARM3/sysldr.c:3024) ZwOpenFile failed for '\SystemRoot\system32\drivers\vbemp.sys' with status 0xc000003a (ntoskrnl/mm/ARM3/sysldr.c:3024) ZwOpenFile failed for '\SystemRoot\System32\drivers\pcnet.sys' with status 0xc000003a (lib/drivers/libusb/libusb.cpp:33) USBLIB_AddDevice (drivers/bus/pci/pdo.c:1272) Assigning IRQ 11 to PCI device 0x6 on bus 0x0 (drivers/bus/pci/pdo.c:1289) Enabling command flags for PCI device 0x6 on bus 0x0: [Bus master] [Memory space enable] (drivers/usb/usbohci/hardware.cpp:383) Starting Controller (drivers/usb/usbohci/hardware.cpp:526) Controller State 0 (drivers/usb/usbohci/hardware.cpp:558) Waiting 50 milliseconds for controller to transition state (drivers/usb/usbohci/hardware.cpp:620) FrameInterval 80000000 IntervalValue 2edf (drivers/usb/usbohci/hardware.cpp:622) Computed FrameInterval a7782edf (drivers/usb/usbohci/hardware.cpp:630) Read FrameInterval a7782edf (drivers/usb/usbohci/hardware.cpp:637) Computed Periodic Start 2a2f (drivers/usb/usbohci/hardware.cpp:640) Read Periodic Start 2a2f (drivers/usb/usbohci/hardware.cpp:683) NumberOfPorts 8 (drivers/usb/usbohci/hardware.cpp:704) Descriptor A: 1108 (drivers/usb/usbohci/hardware.cpp:723) Descriptor B: 1fe0000 (drivers/usb/usbohci/hardware.cpp:733) HCCA: 106000 Alignment mask: ffffff00 (drivers/usb/usbohci/hardware.cpp:773) Control 2bf (drivers/usb/usbohci/hardware.cpp:778) OHCI controller is operational (ntoskrnl/io/pnpmgr/pnpmgr.c:4057) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (lib/drivers/libusb/hub_controller.cpp:3938) CHubController::CreatePDO: DeviceName \Device\USBPDO-0 (drivers/usb/usbhub/fdo.c:1641) Status 0, Result 0x00000040 (drivers/usb/usbhub/fdo.c:1642) InformationLevel 0 (drivers/usb/usbhub/fdo.c:1643) ActualLength 40 (drivers/usb/usbhub/fdo.c:1644) PortNumber 0 (drivers/usb/usbhub/fdo.c:1645) DeviceDescriptor 20000112 (drivers/usb/usbhub/fdo.c:1646) HubAddress 0 (drivers/usb/usbhub/fdo.c:1647) NumberofPipes 0 (drivers/usb/usbhub/fdo.c:1740) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 8 (drivers/usb/usbohci/hardware.cpp:1209) Waiting 0 milliseconds for port power up (drivers/usb/usbohci/hardware.cpp:1138) Waiting 100 milliseconds for port to stabilize after connection (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (drivers/usb/usbohci/hardware.cpp:1209) Waiting 0 milliseconds for port power up (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (drivers/usb/usbohci/hardware.cpp:1209) Waiting 0 milliseconds for port power up (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (drivers/usb/usbohci/hardware.cpp:1209) Waiting 0 milliseconds for port power up (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (drivers/usb/usbohci/hardware.cpp:1209) Waiting 0 milliseconds for port power up (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (drivers/usb/usbohci/hardware.cpp:1209) Waiting 0 milliseconds for port power up (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (drivers/usb/usbohci/hardware.cpp:1209) Waiting 0 milliseconds for port power up (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (drivers/usb/usbohci/hardware.cpp:1209) Waiting 0 milliseconds for port power up (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (ntoskrnl/io/pnpmgr/pnpmgr.c:4057) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (lib/drivers/libusb/libusb.cpp:33) USBLIB_AddDevice (drivers/bus/pci/pdo.c:1272) Assigning IRQ 10 to PCI device 0xb on bus 0x0 (drivers/bus/pci/pdo.c:1289) Enabling command flags for PCI device 0xb on bus 0x0: [Bus master] [Memory space enable] (drivers/usb/usbehci/hardware.cpp:367) Controller Capabilities Length 0x20 (drivers/usb/usbehci/hardware.cpp:368) Controller EHCI Version 0x100 (drivers/usb/usbehci/hardware.cpp:369) Controller EHCI Caps HCSParamsLong 0x8 (drivers/usb/usbehci/hardware.cpp:370) Controller EHCI Caps HCCParamsLong 0x84 (drivers/usb/usbehci/hardware.cpp:371) Controller has 8 Ports (drivers/usb/usbehci/hardware.cpp:256) Controller Port Routing Rules 0 (drivers/usb/usbehci/hardware.cpp:257) Number of Ports per Companion Controller 0 (drivers/usb/usbehci/hardware.cpp:258) Number of Companion Controller 0 (drivers/usb/usbehci/hardware.cpp:277) Controller supports Asynchronous Schedule Park (drivers/usb/usbehci/hardware.cpp:489) Starting Controller (drivers/usb/usbehci/hardware.cpp:714) Interrupt Mask 37 (drivers/usb/usbehci/hardware.cpp:808) Failed to enable async schedule UsbSts 4000 (ntoskrnl/io/pnpmgr/pnpmgr.c:4057) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (lib/drivers/libusb/hub_controller.cpp:3938) CHubController::CreatePDO: DeviceName \Device\USBPDO-1 (drivers/usb/usbhub/fdo.c:1641) Status 0, Result 0x00000040 (drivers/usb/usbhub/fdo.c:1642) InformationLevel 0 (drivers/usb/usbhub/fdo.c:1643) ActualLength 40 (drivers/usb/usbhub/fdo.c:1644) PortNumber 0 (drivers/usb/usbhub/fdo.c:1645) DeviceDescriptor 20000112 (drivers/usb/usbhub/fdo.c:1646) HubAddress 0 (drivers/usb/usbhub/fdo.c:1647) NumberofPipes 0 (drivers/usb/usbhub/fdo.c:1740) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 8 (ntoskrnl/io/pnpmgr/pnpmgr.c:4057) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (ntoskrnl/mm/ARM3/sysldr.c:3024) ZwOpenFile failed for '\SystemRoot\system32\drivers\vbemp.sys' with status 0xc000003a (ntoskrnl/mm/ARM3/sysldr.c:3024) ZwOpenFile failed for '\SystemRoot\System32\drivers\pcnet.sys' with status 0xc000003a (ntoskrnl/mm/ARM3/sysldr.c:3024) ZwOpenFile failed for '\SystemRoot\System32\drivers\i8042prt.sys' with status 0xc000003a (ntoskrnl/mm/ARM3/sysldr.c:3024) ZwOpenFile failed for '\SystemRoot\System32\drivers\i8042prt.sys' with status 0xc000003a (ntoskrnl/mm/ARM3/sysldr.c:3024) ZwOpenFile failed for '\SystemRoot\System32\drivers\serial.sys' with status 0xc000003a (ntoskrnl/mm/ARM3/sysldr.c:3024) ZwOpenFile failed for '\SystemRoot\System32\drivers\cmbatt.sys' with status 0xc000003a (ntoskrnl/mm/ARM3/sysldr.c:3024) ZwOpenFile failed for '\SystemRoot\system32\drivers\vbemp.sys' with status 0xc000003a (ntoskrnl/mm/ARM3/sysldr.c:3024) ZwOpenFile failed for '\SystemRoot\System32\drivers\pcnet.sys' with status 0xc000003a (ntoskrnl/mm/ARM3/sysldr.c:3024) ZwOpenFile failed for '\SystemRoot\System32\drivers\i8042prt.sys' with status 0xc000003a (ntoskrnl/mm/ARM3/sysldr.c:3024) ZwOpenFile failed for '\SystemRoot\System32\drivers\i8042prt.sys' with status 0xc000003a (ntoskrnl/mm/ARM3/sysldr.c:3024) ZwOpenFile failed for '\SystemRoot\System32\drivers\serial.sys' with status 0xc000003a (ntoskrnl/mm/ARM3/sysldr.c:3024) ZwOpenFile failed for '\SystemRoot\System32\drivers\cmbatt.sys' with status 0xc000003a (lib/drivers/libusb/hub_controller.cpp:315) [USBOHCI] SCE Request B24150D8 TransferBufferLength 32 Flags 3 MDL 00000000 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 0: Status 1, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 1: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 2: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 3: Status 0, Change 0 (ntoskrnl/io/iomgr/iorsrce.c:725) Failed to open symlink \Device\Harddisk0\Partition1, Status=c0000024 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 4: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 5: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 6: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 7: Status 0, Change 0 (drivers/filesystems/fastfat/fsctl.c:615) Mount success (drivers/usb/usbohci/hardware.cpp:1395) Disabling status change interrupt (drivers/usb/usbohci/hardware.cpp:1514) Port 0 completed reset (lib/drivers/libusb/hub_controller.cpp:315) [USBEHCI] SCE Request B24153A8 TransferBufferLength 32 Flags 3 MDL 00000000 (lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 0: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 1: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 2: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 3: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 4: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 5: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 6: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 7: Status 100, Change 0 (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\vbemp.sys at F77DB000 with 9 pages (lib/drivers/libusb/hub_controller.cpp:315) [USBOHCI] SCE Request B24150D8 TransferBufferLength 32 Flags 3 MDL 00000000 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 0: Status 3, Change 10 (lib/drivers/libusb/hub_controller.cpp:334) [USBOHCI] Change state on port 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 1: Status 0, Change 0 (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\videoprt.sys at F77C4000 with 17 pages Formatted registry key '\Registry\Machine\System\CurrentControlSet\Services\VBE' -> '\Registry\Machine\System\CurrentControlSet\Hardware Profiles\Current\System\CurrentControlSet\Services\VBE\Device0' (drivers/bus/pci/pdo.c:1272) Assigning IRQ 11 to PCI device 0x2 on bus 0x0 (drivers/bus/pci/pdo.c:1289) Enabling command flags for PCI device 0x2 on bus 0x0: [Bus master] [Memory space enable] (ntoskrnl/io/pnpmgr/pnpmgr.c:858) IRP_MN_QUERY_CAPABILITIES failed with status 0xc00000bb (ntoskrnl/io/pnpmgr/pnpmgr.c:691) IopInitiatePnpIrp() failed (Status 0xc00000bb) (ntoskrnl/io/pnpmgr/pnpmgr.c:4057) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 2: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 3: Status 0, Change 0 (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\System32\drivers\pcnet.sys at F77BA000 with a pages (/srv/buildbot_cmake/full_cmake/build/drivers/network/ndis/ndis/miniport.c:2629)(NdisMRegisterMiniport) Initializing an NDIS 5.1 miniport (drivers/bus/pci/pdo.c:1272) Assigning IRQ 10 to PCI device 0x3 on bus 0x0 (drivers/bus/pci/pdo.c:1289) Enabling command flags for PCI device 0x3 on bus 0x0: [Bus master] [Memory space enable] [I/O space enable] (/srv/buildbot_cmake/full_cmake/build/drivers/network/ndis/ndis/miniport.c:2848)(NdisMSetAttributesEx) Miniport attribute flags: 0x8 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 4: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 5: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 6: Status 0, Change 0 (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\System32\drivers\i8042prt.sys at F77A7000 with 10 pages (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 7: Status 0, Change 0 (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\System32\drivers\kbdclass.sys at F779C000 with b pages (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (lib/drivers/libusb/hub_controller.cpp:2705) USBHI_CreateUsbDevice (drivers/input/i8042prt/pnp.c:752) IRP_MJ_PNP / unknown minor function 0x9 (ntoskrnl/io/pnpmgr/pnpmgr.c:4057) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (lib/drivers/libusb/usb_device.cpp:314) [USBOHCI] SetDeviceAddress> Address 1 (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\System32\drivers\mouclass.sys at F7793000 with 9 pages (drivers/input/i8042prt/pnp.c:752) IRP_MJ_PNP / unknown minor function 0x9 (ntoskrnl/io/pnpmgr/pnpmgr.c:4057) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (lib/drivers/libusb/usb_device.cpp:844) Dumping Device Descriptor B240D1A8 (lib/drivers/libusb/usb_device.cpp:845) bLength 12 (lib/drivers/libusb/usb_device.cpp:846) bDescriptorType 1 (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\System32\drivers\serial.sys at F7787000 with c pages (ntoskrnl/io/pnpmgr/pnpres.c:614) Resource conflict: IRQ (0x4 0x4 vs. 0x4 0x4) (ntoskrnl/io/pnpmgr/pnpres.c:1099) Boot resources for ACPI\PNP0501\0 cause a resource conflict! (ntoskrnl/io/pnpmgr/pnpres.c:135) Satisfying port requirement with 0x3f8 (length: 0x8) (ntoskrnl/io/pnpmgr/pnpres.c:384) Failed to find an available interrupt resource (0x4 to 0x4) (ntoskrnl/io/pnpmgr/pnpres.c:512) Unable to satisfy preferred resource or alternates in list 0 (ntoskrnl/io/pnpmgr/pnpres.c:523) Out of alternate lists! (ntoskrnl/io/pnpmgr/pnpres.c:1122) Failed to fixup a resource list from supplied resources for ACPI\PNP0501\0 (lib/drivers/libusb/usb_device.cpp:847) bcdUSB 110 (lib/drivers/libusb/usb_device.cpp:848) bDeviceClass 0 (lib/drivers/libusb/usb_device.cpp:849) bDeviceSubClass 0 (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\System32\drivers\cmbatt.sys at F7779000 with e pages (lib/drivers/libusb/usb_device.cpp:850) bDeviceProtocol 0 (lib/drivers/libusb/usb_device.cpp:851) bMaxPacketSize0 8 (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\System32\drivers\battc.sys at F7772000 with 7 pages (lib/drivers/libusb/usb_device.cpp:852) idVendor 80ee (lib/drivers/libusb/usb_device.cpp:853) idProduct 21 (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\System32\drivers\wmilib.sys at F776B000 with 7 pages (ntoskrnl/io/pnpmgr/pnpmgr.c:469) \Driver\CMBATT->AddDevice(ACPI\ACPI0003\0) failed with status 0xc0000034 (lib/drivers/libusb/usb_device.cpp:854) bcdDevice 100 (lib/drivers/libusb/usb_device.cpp:855) iManufacturer 1 (lib/drivers/libusb/usb_device.cpp:856) iProduct 3 (lib/drivers/libusb/usb_device.cpp:857) iSerialNumber 0 (lib/drivers/libusb/usb_device.cpp:858) bNumConfigurations 1 (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\floppy.sys at F7758000 with 13 pages (ntoskrnl/io/iomgr/driver.c:1630) '\Driver\FLOPPY' initialization failed, status (0xc000000e) (ntoskrnl/io/iomgr/driver.c:64) Deleting driver object '\Driver\FLOPPY' (ntoskrnl/io/iomgr/driver.c:2040) IopInitializeDriverModule() failed (Status c000000e) (ntoskrnl/mm/ARM3/sysldr.c:954) Leaking driver: floppy.sys (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\cdrom.sys at F7744000 with 10 pages (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\fs_rec.sys at F773B000 with 9 pages (lib/drivers/libusb/usb_device.cpp:865) Dumping ConfigurationDescriptor B236E000 (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\beep.sys at F7734000 with 7 pages (lib/drivers/libusb/usb_device.cpp:866) bLength 9 (lib/drivers/libusb/usb_device.cpp:867) bDescriptorType 2 (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\null.sys at F772D000 with 7 pages (lib/drivers/libusb/usb_device.cpp:868) wTotalLength 22 (lib/drivers/libusb/usb_device.cpp:869) bNumInterfaces 1 (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\blue.sys at F7725000 with 8 pages (lib/drivers/libusb/usb_device.cpp:870) bConfigurationValue 1 (lib/drivers/libusb/usb_device.cpp:871) iConfiguration 0 (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\msfs.sys at F771E000 with 7 pages (lib/drivers/libusb/usb_device.cpp:872) bmAttributes 80 (lib/drivers/libusb/usb_device.cpp:873) MaxPower 32 (drivers/usb/usbhub/fdo.c:782) IsCompositeDevice bNumInterfaces 1 (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\npfs.sys at F770C000 with 12 pages (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\ndisuio.sys at F7702000 with a pages (/srv/buildbot_cmake/full_cmake/build/drivers/network/ndis/ndis/protocol.c:981)(ndisBindMiniportsToProtocol) Performing global bind for protocol 'NDISUIO' (/srv/buildbot_cmake/full_cmake/build/drivers/network/ndis/ndis/protocol.c:1077)(ndisBindMiniportsToProtocol) NDISUIO's BindAdapter handler returned 0x0 for \Device\{f4dcdc78-7425-40b4-8894-fc15e3fd4237} (drivers/network/ndisuio/protocol.c:57) NetPnPEvent unimplemented for net event 0x6 (drivers/network/ndisuio/main.c:102) NDISUIO: Loaded (drivers/usb/usbhub/fdo.c:688) StringDesc->bLength 22 (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\System32\drivers\tcpip.sys at F76CC000 with 36 pages (lib/drivers/libusb/hub_controller.cpp:315) [USBOHCI] SCE Request B24150D8 TransferBufferLength 32 Flags 3 MDL 00000000 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 0: Status 3, Change 0 (/srv/buildbot_cmake/full_cmake/build/drivers/network/ndis/ndis/protocol.c:988)(ndisBindMiniportsToProtocol) Performing standard bind for protocol 'TCPIP' NDIS_STATUS_MEDIA_CONNECT (/srv/buildbot_cmake/full_cmake/build/drivers/network/ndis/ndis/protocol.c:1077)(ndisBindMiniportsToProtocol) TCPIP's BindAdapter handler returned 0x0 for \Device\{f4dcdc78-7425-40b4-8894-fc15e3fd4237} Unhandled event type: 6 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 1: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 2: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 3: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 4: Status 0, Change 0 (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\afd.sys at F76AD000 with 1b pages (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 5: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 6: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 7: Status 0, Change 0 (drivers/usb/usbhub/pdo.c:539) USB Tablet (drivers/usb/usbhub/pdo.c:539) USB Tablet (drivers/bus/acpi/main.c:273) Fixed power button reported to power manager (drivers/bus/acpi/main.c:278) Fixed sleep button reported to power manager (ntoskrnl/ex/init.c:1959) Free non-cache pages: 3c7d7 (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\System32\drivers\hidusb.sys at F769B000 with 9 pages (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\System32\drivers\hidclass.sys at F768F000 with c pages (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\System32\drivers\hidparse.sys at F7683000 with c pages (drivers/usb/usbhub/pdo.c:745) PDO IRP_MJ_PNP / unknown minor function 0xd WARNING: USBHUB_PdoStartDevice at drivers/usb/usbhub/pdo.c:414 is UNIMPLEMENTED! WARNING: RtlCreateTagHeap at lib/rtl/heap.c:3855 is UNIMPLEMENTED! (drivers/usb/usbohci/usb_queue.cpp:667) URB failed with status 0xc0000004 (drivers/usb/usbohci/usb_request.cpp:1831) OHCI_TD_CONDITION_STALL detected in TransferDescriptor TransferDescriptor F77E93E0 (lib/drivers/libusb/hub_controller.cpp:2182) [USBOHCI] URB_FUNCTION_CLASS_INTERFACE failed with Urb Status 0 (drivers/hid/hidusb/hidusb.c:1416) Status c0000001 (drivers/usb/usbhub/pdo.c:287) IOCTL_INTERNAL_USB_SUBMIT_URB Function 28 NOT IMPLEMENTED (drivers/usb/usbhub/pdo.c:745) PDO IRP_MJ_PNP / unknown minor function 0x14 (ntoskrnl/io/pnpmgr/pnpmgr.c:4057) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\System32\drivers\mouhid.sys at F766E000 with 8 pages (drivers/hid/hidclass/hidclass.c:161) [HIDCLASS] PnP HACK (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\cdfs.sys at F7662000 with c pages (base/system/smss/pagefile.c:909) SMSS:PFILE: Volume `\??\D:\' (3) cannot store a paging file Boot took 32081402168 cycles! Interrupts: 949 System Calls: 16799 Context Switches: 544 (ntoskrnl/config/cmcheck.c:25) CmCheckRegistry(0xB224A008, 0) is UNIMPLEMENTED! (ntoskrnl/config/cmcheck.c:25) CmCheckRegistry(0xB2248008, 0) is UNIMPLEMENTED! (ntoskrnl/config/cmcheck.c:25) CmCheckRegistry(0xB2249008, 0) is UNIMPLEMENTED! (ntoskrnl/config/cmcheck.c:25) CmCheckRegistry(0xB2247008, 0) is UNIMPLEMENTED! (ntoskrnl/mm/ARM3/session.c:795) Session 0 is ready to go: 0xBF7F0000 0xF764C000, 1249 0xB2239408 (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\System32\win32k.sys at F7505000 with 147 pages (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\System32\ftfd.dll at F7482000 with 83 pages (subsystems/win32/csrsrv/init.c:579) Name=ObjectDirectory, Value=\Windows (subsystems/win32/csrsrv/init.c:579) Name=SharedSection, Value=1024,12288,512 (subsystems/win32/csrsrv/init.c:579) Name=Windows, Value=On (subsystems/win32/csrsrv/init.c:579) Name=SubSystemType, Value=Windows (subsystems/win32/csrsrv/init.c:579) Name=ServerDll, Value=basesrv,1 (subsystems/win32/csrsrv/init.c:579) Name=ServerDll, Value=winsrv:UserServerDllInitialization,3 (win32ss/user/ntuser/sysparams.c:1578) err: UserSystemParametersInfo called without active window station. (win32ss/user/winsrv/init.c:52) WINSRV - HACK: Use keyboard hook hack (win32ss/user/ntuser/winsta.c:223) err: Invalid window station handle (win32ss/user/ntuser/ntuser.c:168) err: Enter NtUserInitialize(0, 00000000, 00000000) (win32ss/user/ntuser/display.c:79) err: InitDisplayDriver(\Device\Video0, \Registry\Machine\System\CurrentControlSet\Hardware Profiles\Current\System\CurrentControlSet\Services\VBE\Device0); (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\System32\framebuf.dll at F7468000 with a pages err:(win32ss/user/user32/misc/dllmain.c:390) ClientThreadSetup fixme:(win32ss/user/user32/misc/dllmain.c:253) ClientThreadSetup is UNIMPLEMENTED! (subsystems/win32/csrsrv/init.c:579) Name=ServerDll, Value=winsrv:ConServerDllInitialization,2 (subsystems/win32/csrsrv/init.c:579) Name=ProfileControl, Value=Off (subsystems/win32/csrsrv/init.c:579) Name=MaxRequestThreads, Value=16 (win32ss/user/ntuser/keyboard.c:203) err: Keyboard type 4, subtype 0 and number of func keys 4 (win32ss/user/ntuser/hotkey.c:55) err: Start up the debugger hotkeys!! Should see this once! fixme:(win32ss/user/user32/misc/dllmain.c:253) ClientThreadSetup is UNIMPLEMENTED! fixme:(win32ss/user/user32/misc/dllmain.c:253) ClientThreadSetup is UNIMPLEMENTED! (win32ss/user/ntuser/sysparams.c:1578) err: UserSystemParametersInfo called without active window station. (win32ss/user/ntuser/desktop.c:1994) err: Attempted to change thread desktop although the thread has windows! (ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\System32\kbdus.dll at F7443000 with 5 pages (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00100000 DesiredAccess = 0x00190003 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00100000 DesiredAccess = 0x00190003 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00100000 DesiredAccess = 0x00190003 (win32ss/user/ntuser/desktop.c:476) err: Got handle: 000003A8 (win32ss/user/ntuser/desktop.c:1994) err: Attempted to change thread desktop although the thread has windows! err:(win32ss/user/user32/windows/window.c:346) CreateWindowExA RegisterSystemControls Boot took 36908618964 cycles! Interrupts: 1641 System Calls: 22841 Context Switches: 2085 (win32ss/user/ntuser/desktop.c:529) err: ptiLastInput is CLEARED!! (win32ss/user/ntuser/msgqueue.c:2071) err: DereferenceObject pCursor (lib/lsalib/lsa.c:314) LsaRegisterLogonProcess() (base/system/services/services.c:67) ScmLogEvent: RegisterEventSourceW failed 1722 (base/system/services/services.c:67) ScmLogEvent: RegisterEventSourceW failed 1722 fixme:(dll/win32/rpcrt4/rpc_server.c:1670) (0x1000): stub [SVCHOST] ec.118: GetProcAddress (SvchostPushServiceGlobals) failed on DLL c:\reactos\system32\dhcpcsvc.dll. Error 127. err:(dll/win32/lsasrv/lsarpc.c:1136) LsapOpenDbObject failed (Status 0xc0000034) err:(dll/win32/lsasrv/lsarpc.c:1136) LsapOpenDbObject failed (Status 0xc0000034) err:(dll/win32/lsasrv/lsarpc.c:1136) LsapOpenDbObject failed (Status 0xc0000034) err:(dll/win32/lsasrv/lsarpc.c:1136) LsapOpenDbObject failed (Status 0xc0000034) (base/system/services/rpcserver.c:1792) RNotifyBootConfigStatus(00000000 1) called Boot took 38706440822 cycles! Interrupts: 1731 System Calls: 37544 Context Switches: 3081 (ntoskrnl/config/cmcheck.c:25) CmCheckRegistry(0xB20493D8, 0) is UNIMPLEMENTED! fixme:(dll/win32/rpcrt4/rpc_server.c:1670) (0x1000): stub [SVCHOST] 18c.1a4: GetProcAddress (SvchostPushServiceGlobals) failed on DLL c:\reactos\system32\umpnpmgr.dll. Error 127. DHCPCSVC: Adapter Name: [{f4dcdc78-7425-40b4-8894-fc15e3fd4237}] (dynamic) (dll/win32/kernel32/client/proc.c:4038) Current directory: C:\ReactOS (win32ss/user/ntuser/desktop.c:1994) err: Attempted to change thread desktop although the thread has windows! (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00100000 DesiredAccess = 0x00100000 (win32ss/user/ntuser/desktop.c:529) err: ptiLastInput is CLEARED!! (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00000002 DesiredAccess = 0x0000000a (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00000112 DesiredAccess = 0x0010019b (base/services/umpnpmgr/umpnpmgr.c:3000) Installing: PCI\VEN_80EE&DEV_CAFE&SUBSYS_00000000&REV_00\3&609b8881&04 (lib/rtl/actctx.c:1395) Unsupported yet language attribute ((null)) (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00000002 DesiredAccess = 0x0000000a (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00000112 DesiredAccess = 0x0010019b err:(win32ss/user/user32/misc/dde.c:886) instance created - checking validity err:(win32ss/user/user32/misc/dde.c:891) new instance, callback 7654BA80 flags 14000 err:(win32ss/user/user32/misc/dde.c:910) First application instance detected OK err:(win32ss/user/user32/misc/dde.c:991) New application instance processing finished OK fixme:(dll/win32/ole32/stubmanager.c:629) No interface for iid {00000019-0000-0000-c000-000000000046} (win32ss/user/ntuser/winpos.c:1397) err: Window is HWND_BOTTOM err:(dll/win32/comctl32/toolbar.c:6773) unknown msg 0466 wp=00000000 lp=0022ec14 Using shell hooks for notification of shell events. (win32ss/user/ntuser/focus.c:578) err: Mouse Active (win32ss/user/ntuser/msgqueue.c:2071) err: DereferenceObject pCursor (base/services/umpnpmgr/umpnpmgr.c:3109) Success? 0 (base/services/umpnpmgr/umpnpmgr.c:3000) Installing: PCI\VEN_8086&DEV_2415&SUBSYS_00008086&REV_01\3&609b8881&05 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00000002 DesiredAccess = 0x0000000a (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00000112 DesiredAccess = 0x0010019b (win32ss/user/ntuser/focus.c:578) err: Mouse Active (win32ss/user/ntuser/msgqueue.c:2071) err: DereferenceObject pCursor (base/services/umpnpmgr/umpnpmgr.c:3109) Success? 0 (ntoskrnl/ex/init.c:2001) Free non-cache pages: 3b3f5 (ntoskrnl/mm/ARM3/zeropage.c:50) Free non-cache pages: 3b636 (win32ss/user/ntuser/focus.c:578) err: Mouse Active fixme:(dll/win32/shell32/shlexec.cpp:1780) flags ignored: 0x00000004 fixme:(dll/win32/shell32/shlexec.cpp:1780) flags ignored: 0x00004000 (dll/win32/kernel32/client/proc.c:4038) Current directory: C:\ReactOS\system32 (lib/rtl/actctx.c:1395) Unsupported yet language attribute ((null)) (lib/rtl/actctx.c:2395) unknown element trustInfo (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00000112 DesiredAccess = 0x0010019b (win32ss/gdi/ntgdi/gdiobj.c:1097) GreGetObjectOwner: invalid handle 0x000500F0. (win32ss/gdi/ntgdi/gdiobj.c:1097) GreGetObjectOwner: invalid handle 0x000500F2. (win32ss/gdi/ntgdi/gdiobj.c:1097) GreGetObjectOwner: invalid handle 0x000500F4. fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported err:(win32ss/user/user32/misc/dllmain.c:422) hIconSmWindows 0017011E hIconWindows 00170120 (win32ss/user/ntuser/callback.c:1090) err: hIconSmWindows 0017011E hIconWindows 00170120 fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported (win32ss/user/ntuser/focus.c:578) err: Mouse Active (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00000112 DesiredAccess = 0x0010019b (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00000112 DesiredAccess = 0x0010019b (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00000112 DesiredAccess = 0x0010019b (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00000112 DesiredAccess = 0x0010019b (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 TCP operation failed: 0xc0000128 (-12) (win32ss/user/ntuser/winpos.c:3046) err: NtUserSetWindowPos bad window handle! (win32ss/user/ntuser/message.c:1201) err: UserPostMessage: Invalid handle 0x000500FC Msg 0! fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported (win32ss/user/ntuser/focus.c:578) err: Mouse Active fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported (win32ss/user/ntuser/focus.c:578) err: Mouse Active fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported (win32ss/user/ntuser/focus.c:578) err: Mouse Active fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported (win32ss/user/ntuser/focus.c:578) err: Mouse Active fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported (win32ss/user/ntuser/focus.c:578) err: Mouse Active (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00000112 DesiredAccess = 0x0010019b (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00000112 DesiredAccess = 0x0010019b (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00000112 DesiredAccess = 0x0010019b (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00000112 DesiredAccess = 0x0010019b (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00000112 DesiredAccess = 0x0010019b (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00000112 DesiredAccess = 0x0010019b (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00000112 DesiredAccess = 0x0010019b (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00000112 DesiredAccess = 0x0010019b (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00000112 DesiredAccess = 0x0010019b (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00000112 DesiredAccess = 0x0010019b (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (win32ss/user/ntuser/focus.c:578) err: Mouse Active (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported (win32ss/user/ntuser/focus.c:578) err: Mouse Active fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported (win32ss/user/ntuser/focus.c:578) err: Mouse Active fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00000112 DesiredAccess = 0x0010019b (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00000112 DesiredAccess = 0x0010019b (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00000112 DesiredAccess = 0x0010019b (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00000112 DesiredAccess = 0x0010019b (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00000112 DesiredAccess = 0x0010019b (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00000112 DesiredAccess = 0x0010019b (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00000112 DesiredAccess = 0x0010019b (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00000112 DesiredAccess = 0x0010019b (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00000112 DesiredAccess = 0x0010019b (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00000112 DesiredAccess = 0x0010019b (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/ke/bug.c:278) RealFrameCount =0 (ntoskrnl/mm/ARM3/virtual.c:5496) MM:MmGetPhysicalAddressFailed base address was 8A987000 (ntoskrnl/ke/bug.c:278) RealFrameCount =0 (ntoskrnl/mm/ARM3/virtual.c:5496) MM:MmGetPhysicalAddressFailed base address was 8A989000 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 TCP operation failed: 0xc0000128 (-12) err:(win32ss/user/user32/windows/dialog.c:2041) got invalid window handle (000800FC); buggy app !? (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 (ntoskrnl/se/accesschk.c:253) HACK: RemainingAccess = 0x00190000 DesiredAccess = 0x00190001 TCP operation failed: 0xc0000128 (-12) (ntoskrnl/ke/bug.c:278) RealFrameCount =0 (ntoskrnl/mm/ARM3/virtual.c:5496) MM:MmGetPhysicalAddressFailed base address was 8BA0B000 (ntoskrnl/ke/bug.c:278) RealFrameCount =0 (ntoskrnl/mm/ARM3/virtual.c:5496) MM:MmGetPhysicalAddressFailed base address was 8BA0D000 (ntoskrnl/ke/bug.c:278) RealFrameCount =0 (ntoskrnl/mm/ARM3/virtual.c:5496) MM:MmGetPhysicalAddressFailed base address was 8BA0F000 (lib/rtl/actctx.c:1395) Unsupported yet language attribute ((null)) (lib/rtl/actctx.c:2395) unknown element trustInfo (lib/rtl/actctx.c:2395) unknown element compatibility fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported fixme:(dll/win32/riched20/editor.c:3510) EM_SETCHARFORMAT: word selection not supported (win32ss/user/ntuser/winpos.c:3046) err: NtUserSetWindowPos bad window handle! (win32ss/user/ntuser/message.c:1201) err: UserPostMessage: Invalid handle 0x00060132 Msg 0! (lib/rtl/actctx.c:1395) Unsupported yet language attribute ((null)) (lib/rtl/actctx.c:2395) unknown element trustInfo (win32ss/user/ntuser/winpos.c:3046) err: NtUserSetWindowPos bad window handle! (win32ss/user/ntuser/defwnd.c:1087) err: WM_SETREDRAW (win32ss/user/ntuser/defwnd.c:1087) err: WM_SETREDRAW (win32ss/user/ntuser/winpos.c:3046) err: NtUserSetWindowPos bad window handle! (win32ss/user/ntuser/winpos.c:3046) err: NtUserSetWindowPos bad window handle! (win32ss/user/ntuser/defwnd.c:1087) err: WM_SETREDRAW (win32ss/user/ntuser/defwnd.c:1087) err: WM_SETREDRAW (dll/ntdll/ldr/ldrutils.c:1323) LDR: LdrpMapDll Relocating Image Name C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\nso3.tmp\System.dll (10000000 -> 00870000) (dll/ntdll/ldr/ldrutils.c:1362) Overlapping DLL: C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\nso3.tmp\InstallOptions.dll (win32ss/user/ntuser/winpos.c:3046) err: NtUserSetWindowPos bad window handle! (win32ss/user/ntuser/defwnd.c:1087) err: WM_SETREDRAW (win32ss/user/ntuser/defwnd.c:1087) err: WM_SETREDRAW (win32ss/user/ntuser/defwnd.c:1087) err: WM_SETREDRAW (win32ss/user/ntuser/defwnd.c:1087) err: WM_SETREDRAW (win32ss/user/ntuser/winpos.c:3046) err: NtUserSetWindowPos bad window handle! (lib/rtl/actctx.c:1395) Unsupported yet language attribute ((null)) (lib/rtl/actctx.c:2395) unknown element ms_asmv3:trustInfo (lib/rtl/actctx.c:2395) unknown element compatibility (win32ss/user/ntuser/windc.c:749) err: [0002015A] GetDC() without ReleaseDC()! (win32ss/user/ntuser/windc.c:749) err: [0002015A] GetDC() without ReleaseDC()! (win32ss/user/ntuser/windc.c:749) err: [0002015A] GetDC() without ReleaseDC()! (win32ss/user/ntuser/desktop.c:529) err: ptiLastInput is CLEARED!! (win32ss/user/ntuser/msgqueue.c:2071) err: DereferenceObject pCursor (dll/ntdll/ldr/ldrutils.c:1323) LDR: LdrpMapDll Relocating Image Name sqlite3.dll (10000000 -> 00170000) (dll/ntdll/ldr/ldrutils.c:1362) Overlapping DLL: C:\Program Files\Mozilla Firefox\xul.dll  Entered debugger on last-chance exception (Exception Code: 0xc0000005) (Page Fault) Memory at 0x00000000 could not be read: Page not present. kdb:> bt Eip: Frames: --- Press q to abort, any other key to continue --- <00000000> kdb:> ont Command 'ont' is unknown. kdb:> Command 'ont' is unknown. kdb:> cont *** Fatal System Error: 0x0000001e (0xC0000005,0xF7B8EDC6,0xF71A5A94,0x00000000) Entered debugger on embedded INT3 at 0x0008:0x8095a318. kdb:> (ntoskrnl/ke/bug.c:600) Potentially unloaded driver! (ntoskrnl/ke/bug.c:600) Potentially unloaded driver! (ntoskrnl/ke/bug.c:600) Potentially unloaded driver! Entered debugger on embedded INT3 at 0x0008:0x8095a318. kdb:>