=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2015.03.12 12:17:51 =~=~=~=~=~=~=~=~=~=~=~=
(../../ntoskrnl/kd/kdio.c:376) -----------------------------------------------------
(../../ntoskrnl/kd/kdio.c:377) ReactOS 0.4-SVN (Build 20150311-r66664)
(../../ntoskrnl/kd/kdio.c:379) 1 System Processor [191 MB Memory]
(../../ntoskrnl/kd/kdio.c:380) Command Line: NOGUIBOOT KDSERIAL DEBUGPORT=COM1 FIRSTCHANCE
(../../ntoskrnl/kd/kdio.c:384) ARC Paths: multi(0)disk(0)cdrom(2) \ multi(0)disk(0)cdrom(2) \reactos\
(../../ntoskrnl/ke/i386/cpu.c:494) Supported CPU features : KF_V86_VIS KF_RDTSC KF_CR4 KF_CMOV KF_GLOBAL_PAGE KF_LARGE_PAGE KF_MTRR KF_CMPXCHG8B KF_MMX KF_WORKING_PTE KF_PAT KF_FXSR KF_FAST_SYSCALL KF_XMMI       
(../../ntoskrnl/ke/i386/cpu.c:801) Prefetch Cache: 32 bytes	L2 Cache: 262144 bytes	L2 Cache Line: 64 bytes	L2 Cache Associativity: 8
(../../ntoskrnl/mm/mminit.c:260)           0x80000000 - 0x83000000	Boot Loaded Image
(../../ntoskrnl/mm/mminit.c:264)           0xB0000000 - 0xB0150000	PFN Database
(../../ntoskrnl/mm/mminit.c:268)           0xB0150000 - 0xB0350000	ARM3 Non Paged Pool
(../../ntoskrnl/mm/mminit.c:272)           0xB9400000 - 0xBB400000	System View Space
(../../ntoskrnl/mm/mminit.c:276)           0xBB400000 - 0xC0000000	Session Space
(../../ntoskrnl/mm/mminit.c:279)           0xC0000000 - 0xC03FFFFF	Page Tables
(../../ntoskrnl/mm/mminit.c:282)           0xC0300000 - 0xC0300FFF	Page Directories
(../../ntoskrnl/mm/mminit.c:285)           0xC0400000 - 0xC07FFFFF	Hyperspace
(../../ntoskrnl/mm/mminit.c:289)           0xE1000000 - 0xEA000000	ARM3 Paged Pool
(../../ntoskrnl/mm/mminit.c:292)           0xF6000000 - 0xFB609000	System PTE Space
(../../ntoskrnl/mm/mminit.c:295)           0xFB609000 - 0xFFBE0000	Non Paged Pool Expansion PTE Space
(../../ntoskrnl/config/cmhvlist.c:158) CmpAddToHiveFileList: Creation or opening of the hive list failed, status = c0000034
(../../hal/halx86/legacy/bussupp.c:594) Your machine has a PCI-to-PCI or CardBUS Bridge. PCI devices may fail!
(../../hal/halx86/legacy/bussupp.c:623) Found parent bus (indicating PCI Bridge). PCI devices may fail!

====== PCI BUS HARDWARE DETECTION =======

00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge [8086:7190] (rev 03)
	Subsystem: Toshiba Tecra 8100 Laptop System Chipset [1179:0001]
	Flags: bus master, medium devsel, latency 64
	Memory at f0000000 (32-bit, prefetchable) [size=256M]

00:01.0 PCI bridge [0604]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge [8086:7191] (rev 03)
	Subsystem: Unknown [0000:0000]
	Flags: bus master, 66MHz, medium devsel, latency 64
	Memory at 40010100 (32-bit, non-prefetchable) [size=256]
	Memory at 22a000f0 (32-bit, non-prefetchable) [size=2M]
	Memory at ff70fec0 (32-bit, non-prefetchable) [size=512]
	Memory at 0000fff0 (32-bit, non-prefetchable) [size=256]

00:05.0 Secondary bus towards host CPU [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] (rev 02)
	Subsystem: Unknown [0000:0000]
	Flags: bus master, medium devsel, latency 0

00:05.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01)
	Subsystem: Unknown [0000:0000]
	Flags: bus master, medium devsel, latency 64
	I/O ports at fff0 [size=16]

00:05.2 USB controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB [8086:7112] (rev 01)
	Subsystem: Unknown [0000:0000]
	Flags: bus master, medium devsel, latency 64, IRQ 11
	I/O ports at ff80 [size=128]
	Device is using IRQ 11! ISA Cards using that IRQ may fail!
	Device is an Intel UHCI (USB) Controller. Turn off Legacy USB in your BIOS!

00:05.3 Secondary bus towards host CPU [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 03)
	Subsystem: Unknown [0000:0000]
	Flags: medium devsel, latency 0

00:07.0 Communication controller [0780]: LSI Corporation 56k WinModem [11c1:0441] (rev 01)
	Subsystem: Internal V.90 Modem [1179:0001]
	Flags: bus master, medium devsel, latency 0, IRQ 03
	Memory at ffefff00 (32-bit, non-prefetchable) [size=256]
	I/O ports at 02f8 [size=8]
	I/O ports at 1c00 [size=1K]
	Device is using IRQ 3! ISA Cards using that IRQ (../../ntoskrnl/kd/kdio.c:376) -----------------------------------------------------
(../../ntoskrnl/kd/kdio.c:377) ReactOS 0.4-SVN (Build 20150311-r66664)
(../../ntoskrnl/kd/kdio.c:379) 1 System Processor [191 MB Memory]
(../../ntoskrnl/kd/kdio.c:380) Command Line: NOGUIBOOT KDSERIAL DEBUGPORT=COM1 FIRSTCHANCE
(../../ntoskrnl/kd/kdio.c:384) ARC Paths: multi(0)disk(0)cdrom(2) \ multi(0)disk(0)cdrom(2) \reactos\
(../../ntoskrnl/ke/i386/cpu.c:494) Supported CPU features : KF_V86_VIS KF_RDTSC KF_CR4 KF_CMOV KF_GLOBAL_PAGE KF_LARGE_PAGE KF_MTRR KF_CMPXCHG8B KF_MMX KF_WORKING_PTE KF_PAT KF_FXSR KF_FAST_SYSCALL KF_XMMI       
(../../ntoskrnl/ke/i386/cpu.c:801) Prefetch Cache: 32 bytes	L2 Cache: 262144 bytes	L2 Cache Line: 64 bytes	L2 Cache Associativity: 8
(../../ntoskrnl/mm/mminit.c:260)           0x80000000 - 0x83000000	Boot Loaded Image
(../../ntoskrnl/mm/mminit.c:264)           0xB0000000 - 0xB0150000	PFN Database
(../../ntoskrnl/mm/mminit.c:268)           0xB0150000 - 0xB0350000	ARM3 Non Paged Pool
(../../ntoskrnl/mm/mminit.c:272)           0xB9400000 - 0xBB400000	System View Space
(../../ntoskrnl/mm/mminit.c:276)           0xBB400000 - 0xC0000000	Session Space
(../../ntoskrnl/mm/mminit.c:279)           0xC0000000 - 0xC03FFFFF	Page Tables
(../../ntoskrnl/mm/mminit.c:282)           0xC0300000 - 0xC0300FFF	Page Directories
(../../ntoskrnl/mm/mminit.c:285)           0xC0400000 - 0xC07FFFFF	Hyperspace
(../../ntoskrnl/mm/mminit.c:289)           0xE1000000 - 0xEA000000	ARM3 Paged Pool
(../../ntoskrnl/mm/mminit.c:292)           0xF6000000 - 0xFB609000	System PTE Space
(../../ntoskrnl/mm/mminit.c:295)           0xFB609000 - 0xFFBE0000	Non Paged Pool Expansion PTE Space
(../../ntoskrnl/config/cmhvlist.c:158) CmpAddToHiveFileList: Creation or opening of the hive list failed, status = c0000034
(../../hal/halx86/legacy/bussupp.c:594) Your machine has a PCI-to-PCI or CardBUS Bridge. PCI devices may fail!
(../../hal/halx86/legacy/bussupp.c:623) Found parent bus (indicating PCI Bridge). PCI devices may fail!

====== PCI BUS HARDWARE DETECTION =======

00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge [8086:7190] (rev 03)
	Subsystem: Toshiba Tecra 8100 Laptop System Chipset [1179:0001]
	Flags: bus master, medium devsel, latency 64
	Memory at f0000000 (32-bit, prefetchable) [size=256M]

00:01.0 PCI bridge [0604]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge [8086:7191] (rev 03)
	Subsystem: Unknown [0000:0000]
	Flags: bus master, 66MHz, medium devsel, latency 64
	Memory at 40010100 (32-bit, non-prefetchable) [size=256]
	Memory at 22a000f0 (32-bit, non-prefetchable) [size=2M]
	Memory at ff70fec0 (32-bit, non-prefetchable) [size=512]
	Memory at 0000fff0 (32-bit, non-prefetchable) [size=256]

00:05.0 Secondary bus towards host CPU [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] (rev 02)
	Subsystem: Unknown [0000:0000]
	Flags: bus master, medium devsel, latency 0

00:05.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01)
	Subsystem: Unknown [0000:0000]
	Flags: bus master, medium devsel, latency 64
	I/O ports at fff0 [size=16]

00:05.2 USB controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB [8086:7112] (rev 01)
	Subsystem: Unknown [0000:0000]
	Flags: bus master, medium devsel, latency 64, IRQ 11
	I/O ports at ff80 [size=128]
	Device is using IRQ 11! ISA Cards using that IRQ may fail!
	Device is an Intel UHCI (USB) Controller. Turn off Legacy USB in your BIOS!

00:05.3 Secondary bus towards host CPU [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 03)
	Subsystem: Unknown [0000:0000]
	Flags: medium devsel, latency 0

00:07.0 Communication controller [0780]: LSI Corporation 56k WinModem [11c1:0441] (rev 01)
	Subsystem: Internal V.90 Modem [1179:0001]
	Flags: bus master, medium devsel, latency 0, IRQ 03
	Memory at ffefff00 (32-bit, non-prefetchable) [size=256]
	I/O ports at 02f8 [size=8]
	I/O ports at 1c00 [size=1K]
	Device is using IRQ 3! ISA Cards using that IRQ may fail!

00:09.0 IRDA controller [0d00]: Toshiba America Info Systems FIR Port Type-DO [1179:0d01] (rev 00)
	Subsystem: FIR Port Type-DO [1179:0001]
	Flags: bus master, slow devsel, latency 64, IRQ 11
	I/O ports at ff60 [size=32]
	Device is using IRQ 11! ISA Cards using that IRQ may fail!

00:0b.0 CardBus bridge [0607]: Toshiba America Info Systems ToPIC100 PCI to Cardbus Bridge with ZV Support [1179:0617] (rev 20)
	Subsystem: Unknown [fffc:0000]
	Flags: bus master, slow devsel, latency 64, IRQ assignment required
	Memory at 04800080 (32-bit, non-prefetchable) [size=8M]
	Memory at 00141400 (32-bit, non-prefetchable) [size=1K]
	Memory at fffff000 (32-bit, non-prefetchable) [size=4K]
	Memory at fffff000 (32-bit, non-prefetchable) [size=4K]
	Device is a PCI Cardbus Bridge. It will not work!
00:0b.1 CardBus bridge [0607]: Toshiba America Info Systems ToPIC100 PCI to Cardbus Bridge with ZV Support [1179:0617] (rev 20)
	Subsystem: Unknown [fffc:0000]
	Flags: bus master, slow devsel, latency 64, IRQ assignment required
	Memory at 04800080 (32-bit, non-prefetchable) [size=8M]
	Memory at 00151500 (32-bit, non-prefetchable) [size=256]
	Memory at fffff000 (32-bit, non-prefetchable) [size=4K]
	Memory at fffff000 (32-bit, non-prefetchable) [size=4K]
	Device is a PCI Cardbus Bridge. It will not work!
00:0c.0 Multimedia audio controller [0401]: Yamaha Corporation YMF-744B [DS-1S Audio Controller] [1073:0010] (rev 02)
	Subsystem: Magnia Z310 [1179:0001]
	Flags: bus master, medium devsel, latency 64, IRQ 11
	Memory at febf8000 (32-bit, non-prefetchable) [size=32K]
	I/O ports at ff00 [size=256]
	I/O ports at fefc [size=4]
	Device is using IRQ 11! ISA Cards using that IRQ may fail!

01:00.0 VGA compatible controller [0300]: Trident Microsystems Cyber 9525 [1023:9525] (rev 49)
	Subsystem: PCI FastEther LAN on Docker [1179:0002]
	Flags: bus master, 66MHz, medium devsel, latency 8, IRQ 11
	Memory at ff400000 (32-bit, non-prefetchable) [size=4M]
	Memory at ff3e0000 (32-bit, non-prefetchable) [size=128K]
	Memory at fec00000 (32-bit, non-prefetchable) [size=4M]
	Device is using IRQ 11! ISA Cards using that IRQ may fail!

====== PCI BUS DETECTION COMPLETE =======

PC Compatible Eisa/Isa HAL Detected
(../../ntoskrnl/io/pnpmgr/pnpinit.c:62) WARNING!! In PiInitCacheGroupInformation, using ReactOS HACK for SETUPLDR!!
(../../ntoskrnl/io/pnpmgr/pnpinit.c:455) Need to build DACL
(../../ntoskrnl/io/pnpmgr/pnpmgr.c:3212) ZwOpenKey(\Registry\Machine\SYSTEM\CURRENTCONTROLSET\Control\Pnp) failed with status 0xc0000034
(../../ntoskrnl/io/iomgr/driver.c:1630) '\Driver\sacdrv' initialization failed, status (0xc0000037)
(../../ntoskrnl/io/iomgr/driver.c:64) Deleting driver object '\Driver\sacdrv'


ATAPI IDE MiniPort Driver (UniATA) v 0.45e
 Parameter PrintLogo
 Parameter PrintLogo = 0x0
UniATA Init: OS should be ReactOS
UniATA Init: OS ver 4.1 (1), 1 CPU(s)
Performance calibration: dt=14995, counter=267843
InitBadBlocks general
InitBadBlocks returned: 0xc0000034
UniataInitAtaCommands:
 Parameter SkipRaids
 Parameter SkipRaids = 0x1
 Parameter ForceSimplex
 Parameter ForceSimplex = 0x0
 Parameter LogToDisplay
 Parameter LogToDisplay = 0x0
HwInitializationDataSize = 50
set NeedPhysicalAddresses = TRUE
set AtapiAdapterControl() ptr


ATAPI IDE enum supported BusMaster Devices
 Parameter VirtualMachineType
 Parameter VirtualMachineType = 0x0
 Parameter VirtualBox
 Parameter VirtualBox = 0x0
-- BusID: 0x0:0x5:0x1
Storage Class
DevId = 71118086 Class = 0001/0001, ProgIf 80
 Parameter Include
 Parameter Include = 0x0
No force include, check exclude
 Parameter Exclude
 Parameter Exclude = 0x0
Default device
found, pass 0
InterruptPin = 0x0
InterruptLine = 0x0
Enabling Mem/Io spaces and busmastering...
Initial pciData.Command = 0x5
PCI_ENABLE_IO_SPACE
PCI_ENABLE_MEMORY_SPACE
New pciData.Command = 0x5
PCI_ENABLE_BUS_MASTER
InterruptLine = 0x0
Final pciData.Command = 0x5
Range 4 = 0xfff1
count: BMListLen++
-- BusID: 0x0:0x5:0x1
Storage Class
DevId = 71118086 Class = 0001/0001, ProgIf 80
 Parameter Include
 Parameter Include = 0x0
No force include, check exclude
 Parameter Exclude
 Parameter Exclude = 0x0
Default device
found, pass 1
InterruptPin = 0x0
InterruptLine = 0x0
Range 4 = 0xfff1
found suitable device
 Parameter NativePCIMode
 Parameter NativePCIMode = 0x0
Add to BMList, AltInit 0
-- BusID: 0x0:0x5:0x1
Storage Class
DevId = 71118086 Class = 0001/0001, ProgIf 80
 Parameter Include
 Parameter Include = 0x0
No force include, check exclude
 Parameter Exclude
 Parameter Exclude = 0x0
Default device
found, pass 2
InterruptPin = 0x0
InterruptLine = 0x0
Range 4 = 0xfff1
found suitable device
  BMListLen=1
 Parameter WaitBusyCount
 Parameter WaitBusyCount = 0xc8
 Parameter WaitBusyDelay
 Parameter WaitBusyDelay = 0xa
 Parameter WaitDrqDelay
 Parameter WaitDrqDelay = 0xa
 Parameter WaitBusyLongCount
 Parameter WaitBusyLongCount = 0x7d0
 Parameter WaitBusyLongDelay
 Parameter WaitBusyLongDelay = 0xfa
 Parameter AtapiSendDisableIntr
 Parameter AtapiSendDisableIntr = 0x0
 Parameter AtapiDmaRawRead
 Parameter AtapiDmaRawRead = 0x1
 Parameter MaxIsrWait
 Parameter MaxIsrWait = 0x28


ATAPI IDE: Look for legacy ISA-bridged PCI IDE controller (onboard)


ATAPI IDE: BMListLen 1
 Parameter IgnoreIsaCompatiblePci
 Parameter IgnoreIsaCompatiblePci = 0x0
UniataClaimLegacyPCIIDE:
(../../hal/halx86/legacy/bussupp.c:1159) Slot assignment for 5 on bus 0
(../../hal/halx86/legacy/bus/pcibus.c:719) WARNING: PCI Slot Resource Assignment is FOOBAR
ok 0x0
 Parameter IgnoreIsaCompatiblePci
 Parameter IgnoreIsaCompatiblePci = 0x0
Try init channel 0, method 0
UniataFindBusMasterController: Context=0, BMListLen=1
ConfigInfo->Length 8c
AdapterInterfaceType: Isa
bm_offset 0, channel 0 
AdapterInterfaceType=0x1
IoBusNumber=0x0
slotNumber=0x25
busDataRead
DevId = 71118086 Class = 0001/0001
Storage Class
MasterDev (1)
Check exclude
 Parameter Exclude
 Parameter Exclude = 0x0
UniataChipDetect:
HwFlags: 0x0
 Parameter ForceSimplex
 Parameter ForceSimplex = 0x0
i: 0x33
VendorID/DeviceID/Rev 0x8086/0x7111/0x1
i: 0x2
HwFlags: 0x0
 Parameter HwFlagsOverride
 Parameter HwFlagsOverride = 0x0
HwFlagsOverride: 0x0
 Parameter HwFlagsAdd
 Parameter HwFlagsAdd = 0x0
HwFlagsAdd: 0x0
HwFlags (final): 0x0
MaxTransferMode: 0x42
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x42
MaxTransferMode (overriden): 0x42
UniataChipDetectChannels:
MasterDev -> 1 chan
 Parameter Exclude
 Parameter Exclude = 0x0
PortMask 0x1
 Parameter PortMask
 Parameter PortMask = 0x1
Force PortMask 0x1
mask -> 1 chans
 Parameter NumberChannels
 Parameter NumberChannels = 0x1
reg -> 1 chans
Final PortMask 0x1
allocate 2 Luns for 1 channels
ForceSimplex = 0
HwFlags = 0
 (0)HwFlags = 0
 (1)HwFlags = 0
 (2)found suitable device
HwFlags = 0
 (3)Range 4 = 0xfff1
IsBusMaster == TRUE
  AtapiGetIoRange:
  AtapiGetIoRange: rid 0x4, start 0x0, offs 0x0, len 0x8, mem 0x0
  AtapiGetIoRange: (2) 0xfff0
  BusMasterAddress (base): 0xfff0
AtapiReadChipConfig: devExt 0xb0323b5c
AtapiReadChipConfig: dev 0x0, ph chan -1
 Parameter ForceSimplex
 Parameter ForceSimplex = 0x0
MaxTransferMode (base): 0x42
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x42
MaxTransferMode (overriden): 0x42
 Parameter Force80pin
 Parameter Force80pin = 0x0
 Parameter AtapiDmaZeroTransfer
 Parameter AtapiDmaZeroTransfer = 0x0
 Parameter AtapiDmaControlCmd
 Parameter AtapiDmaControlCmd = 0x0
 Parameter AtapiDmaRawRead
 Parameter AtapiDmaRawRead = 0x1
 Parameter AtapiDmaReadWrite
 Parameter AtapiDmaReadWrite = 0x1
AtapiChipInit: dev 0x0, ph chan -2, c -1
HwFlags: 0x0
VendorID/DeviceID/Rev 0x8086/0x7111/0x1
  re-enable IO resources of MasterDev
Enabling Mem/Io spaces and busmastering...
Initial pciData.Command = 0x5
PCI_ENABLE_IO_SPACE
PCI_ENABLE_MEMORY_SPACE
New pciData.Command = 0x5
PCI_ENABLE_BUS_MASTER
InterruptLine = 0x0
Final pciData.Command = 0x5
AtapiChipInit: dev 0x0, ph chan 0, c 0
HwFlags: 0x0
VendorID/DeviceID/Rev 0x8086/0x7111/0x1
simplexOnly = 0 (2)MasterDev (2)
1 channels & 1 irq for 1 controller
update ConfigInfo->nt4
using AtaReq sz 1000
update ConfigInfo->w2k: 64bit 0
chan[0] InterruptMode: 1, Level 14, Level2 0, Vector 0, Vector2 0
Reconstruct ConfigInfo
BMList[i].channel 0x0, NumberChannels 0x1, channel 0x0
de 0xb0323b5c, Channel 0x0
chan = 0xb03233d8
AtapiSetupLunPtrs for channel 0 of 1, 2 luns 
  Chan 0xb03233d8
  Lun 0x0
  Lun ptr 0xb02da008
  Lun 0x1
  Lun ptr 0xb02da310
AtapiReadChipConfig: devExt 0xb0323b5c
AtapiReadChipConfig: dev 0x0, ph chan 0
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x42
MaxTransferMode (overriden): 0x42
 Parameter ReorderEnable
 Parameter ReorderEnable = 0x1
 Parameter Force80pin
 Parameter Force80pin = 0x0
 Parameter ReadCacheEnable
 Parameter ReadCacheEnable = 0x1
 Parameter WriteCacheEnable
 Parameter WriteCacheEnable = 0x1
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x42
 Parameter PreferedTransferMode
 Parameter PreferedTransferMode = 0xffffffff
 Parameter AdvancedPowerMode
 Parameter AdvancedPowerMode = 0x80
 Parameter AcousticMgmt
 Parameter AcousticMgmt = 0x80
 Parameter StandbyTimer
 Parameter StandbyTimer = 0x0
 Parameter ReadOnly
 Parameter ReadOnly = 0x0
 Parameter GeomType
 Parameter GeomType = 0xffffffff
 Parameter Hidden
 Parameter Hidden = 0x0
 Parameter ReadCacheEnable
 Parameter ReadCacheEnable = 0x1
 Parameter WriteCacheEnable
 Parameter WriteCacheEnable = 0x1
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x42
 Parameter PreferedTransferMode
 Parameter PreferedTransferMode = 0xffffffff
 Parameter AdvancedPowerMode
 Parameter AdvancedPowerMode = 0x80
 Parameter AcousticMgmt
 Parameter AcousticMgmt = 0x80
 Parameter StandbyTimer
 Parameter StandbyTimer = 0x0
 Parameter ReadOnly
 Parameter ReadOnly = 0x0
 Parameter GeomType
 Parameter GeomType = 0xffffffff
 Parameter Hidden
 Parameter Hidden = 0x0
set AccessRanges
Getting IO ranges
IO range 1 0x1f0
IO range 2 0x3f6
IDX_IO1 0->1f0(io)
IDX_IO2 10->3f6(io)
IDX_BM_IO 14->fff0(io)
IDX_SATA_IO 19->0(io)
  AltStatus (0x0)
  Reg_0x1 (0x1f1) = 0x0
  Reg_0x2 (0x1f2) = 0x0
  Reg_0x3 (0x1f3) = 0x0
  Reg_0x4 (0x1f4) = 0x0
  Reg_0x5 (0x1f5) = 0x0
  Reg_0x6 (0x1f6) = 0x0
  Reg_0x7 (0x1f7) = 0x0
  BM_0x0 (0xfff0) = 0x0
  BM_0x1 (0xfff1) = 0x0
  BM_0x2 (0xfff2) = 0x4
  BM_0x3 (0xfff3) = 0x0
clean IDE intr 0
clean IDE intr 1
  DMA status 0x4
  clear unexpected DMA intr
AtapiDmaDone: dev 0
claim Compatible controller
claim Primary
AtapiDmaAlloc: allocate tmp buffers below 4Gb
AtapiVirtToPhysAddr_: b0322008 -> 00000000:031d2008
AtapiVirtToPhysAddr_: b02ba000 -> 00000000:0316a000
exit: init spinlock
MasterDev=0x1, NumberChannels=0x1, Isr2DevObj=0xb02db4e8
Init ISR:
Unnecessary
MasterDev=0x1, NumberChannels=0x1, Isr2DevObj=0xb02db4e8
do not tell system, that we know about PCI IO ranges
final chan[1] InterruptMode: 1, Level 14, Level2 0, Vector 0, Vector2 0
return SP_RETURN_FOUND
Attempt 0 of MasterDev ok
(../../ntoskrnl/io/iomgr/iorsrce.c:874) IoReportResourceUsage is halfplemented!
AtapiHwInitialize: (base)
  mark chan 0 of master controller [0] as inited
AtapiChipInit: dev 0xffffffff, ph chan -1, c -1
HwFlags: 0x0
VendorID/DeviceID/Rev 0x8086/0x7111/0x1
  re-enable IO resources of MasterDev
Enabling Mem/Io spaces and busmastering...
Initial pciData.Command = 0x5
PCI_ENABLE_IO_SPACE
PCI_ENABLE_MEMORY_SPACE
New pciData.Command = 0x5
PCI_ENABLE_BUS_MASTER
InterruptLine = 0x0
Final pciData.Command = 0x5
AtapiChipInit: dev 0xffffffff, ph chan 0, c 0
HwFlags: 0x0
VendorID/DeviceID/Rev 0x8086/0x7111/0x1
FindDevices:
AtapiDisableInterrupts_0: 0
  max_ldev 2
CheckDevice: Device 0x0
CheckDevice: reset dev
AtapiSoftReset:
  statusByte2 0:
  DMA status 0x0
  nobody home! 0x0 != 0x55
CheckDevice: Device 0x1
CheckDevice: reset dev
AtapiSoftReset:
  statusByte2 0:
  DMA status 0x0
  nobody home! 0x0 != 0x55
AtapiEnableInterrupts_0: 1
FindDevices: returning 0
AtapiHwInitialize: lChannel 0x0, dev 0
AtapiHwInitialize: lChannel 0x0, dev 1
AtapiHwInitialize: (base) done
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x71118086/0x1
UniataNeedQueueing: TopLevel, qd=0
Send to device 12
TopLevel (2), srb 0xfb2d5f90
TopLevel (3), AtaReq 0xb0311000
  nobody home! 0x0 != 0x55
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xfb2d5f90 complete with status 0xa
AtapiStartIo: AtapiDmaDBSync(b03233d8, fb2d5f90)
AtapiStartIo: UniataRemoveRequest(b03233d8, fb2d5f90)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b03233d8, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   VendorID+DeviceID/Rev 0x71118086/0x1
UniataNeedQueueing: TopLevel, qd=0
Send to device 12
TopLevel (2), srb 0xfb2d5f90
TopLevel (3), AtaReq 0xb0311000
  nobody home! 0x0 != 0x55
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xfb2d5f90 complete with status 0xa
AtapiStartIo: AtapiDmaDBSync(b03233d8, fb2d5f90)
AtapiStartIo: UniataRemoveRequest(b03233d8, fb2d5f90)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b03233d8, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0
   VendorID+DeviceID/Rev 0x71118086/0x1
AtapiStartIo: Communication port
  INQUIRY
AtapiStartIo: Srb 0xfb2d5f90 complete with status 0x1
AtapiStartIo: UniataRemoveRequest(0, fb2d5f90)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x1:0x0
   VendorID+DeviceID/Rev 0x71118086/0x1
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xfb2d5f90 complete with status 0xa
AtapiStartIo: UniataRemoveRequest(0, fb2d5f90)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1
   VendorID+DeviceID/Rev 0x71118086/0x1
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xfb2d5f90 complete with status 0xa
AtapiStartIo: UniataRemoveRequest(0, fb2d5f90)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
ScsiPortInitialize Status 0x0
 Parameter IgnoreIsaCompatiblePci
 Parameter IgnoreIsaCompatiblePci = 0x0
Try init channel 1, method 0
UniataFindBusMasterController: Context=0, BMListLen=1
ConfigInfo->Length 8c
AdapterInterfaceType: Isa
bm_offset 8, channel 1 
AdapterInterfaceType=0x1
IoBusNumber=0x0
slotNumber=0x25
busDataRead
DevId = 71118086 Class = 0001/0001
Storage Class
MasterDev (1)
Check exclude
 Parameter Exclude
 Parameter Exclude = 0x0
UniataChipDetect:
HwFlags: 0x0
 Parameter ForceSimplex
 Parameter ForceSimplex = 0x0
i: 0x33
VendorID/DeviceID/Rev 0x8086/0x7111/0x1
i: 0x2
HwFlags: 0x0
 Parameter HwFlagsOverride
 Parameter HwFlagsOverride = 0x0
HwFlagsOverride: 0x0
 Parameter HwFlagsAdd
 Parameter HwFlagsAdd = 0x0
HwFlagsAdd: 0x0
HwFlags (final): 0x0
MaxTransferMode: 0x42
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x42
MaxTransferMode (overriden): 0x42
UniataChipDetectChannels:
MasterDev -> 1 chan
 Parameter Exclude
 Parameter Exclude = 0x0
PortMask 0x1
 Parameter PortMask
 Parameter PortMask = 0x1
Force PortMask 0x1
mask -> 1 chans
 Parameter NumberChannels
 Parameter NumberChannels = 0x1
reg -> 1 chans
Final PortMask 0x1
allocate 2 Luns for 1 channels
ForceSimplex = 0
HwFlags = 0
 (0)HwFlags = 0
 (1)HwFlags = 0
 (2)found suitable device
HwFlags = 0
 (3)Range 4 = 0xfff1
IsBusMaster == TRUE
  AtapiGetIoRange:
  AtapiGetIoRange: rid 0x4, start 0x0, offs 0x8, len 0x8, mem 0x0
  AtapiGetIoRange: (2) 0xfff8
  BusMasterAddress (base): 0xfff8
AtapiReadChipConfig: devExt 0xb03102b4
AtapiReadChipConfig: dev 0x0, ph chan -1
 Parameter ForceSimplex
 Parameter ForceSimplex = 0x0
MaxTransferMode (base): 0x42
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x42
MaxTransferMode (overriden): 0x42
 Parameter Force80pin
 Parameter Force80pin = 0x0
 Parameter AtapiDmaZeroTransfer
 Parameter AtapiDmaZeroTransfer = 0x0
 Parameter AtapiDmaControlCmd
 Parameter AtapiDmaControlCmd = 0x0
 Parameter AtapiDmaRawRead
 Parameter AtapiDmaRawRead = 0x1
 Parameter AtapiDmaReadWrite
 Parameter AtapiDmaReadWrite = 0x1
AtapiChipInit: dev 0x0, ph chan -2, c -1
HwFlags: 0x0
VendorID/DeviceID/Rev 0x8086/0x7111/0x1
  re-enable IO resources of MasterDev
Enabling Mem/Io spaces and busmastering...
Initial pciData.Command = 0x5
PCI_ENABLE_IO_SPACE
PCI_ENABLE_MEMORY_SPACE
New pciData.Command = 0x5
PCI_ENABLE_BUS_MASTER
InterruptLine = 0x0
Final pciData.Command = 0x5
AtapiChipInit: dev 0x0, ph chan 0, c 0
HwFlags: 0x0
VendorID/DeviceID/Rev 0x8086/0x7111/0x1
simplexOnly = 0 (2)MasterDev (2)
1 channels & 1 irq for 1 controller
update ConfigInfo->nt4
using AtaReq sz 1000
update ConfigInfo->w2k: 64bit 0
chan[1] InterruptMode: 1, Level 15, Level2 0, Vector 0, Vector2 0
Reconstruct ConfigInfo
BMList[i].channel 0x1, NumberChannels 0x1, channel 0x1
de 0xb03102b4, Channel 0x1
chan = 0xb0310b30
AtapiSetupLunPtrs for channel 0 of 1, 2 luns 
  Chan 0xb0310b30
  Lun 0x0
  Lun ptr 0xb02b7008
  Lun 0x1
  Lun ptr 0xb02b7310
AtapiReadChipConfig: devExt 0xb03102b4
AtapiReadChipConfig: dev 0x0, ph chan 1
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x42
MaxTransferMode (overriden): 0x42
 Parameter ReorderEnable
 Parameter ReorderEnable = 0x1
 Parameter Force80pin
 Parameter Force80pin = 0x0
 Parameter ReadCacheEnable
 Parameter ReadCacheEnable = 0x1
 Parameter WriteCacheEnable
 Para Per AdvancedPowerMode = 0x80
 Parameter AcousticMgmt
 Parameter AcousticMgmt = 0x80
 Parameter StandbyTimer
 Parameter StandbyTimer = 0x0
 Parameter ReadOnly
 Parameter ReadOnly = 0x0
 Parameter GeomType
 Parameter GeomType = 0xffffffff
 Parameter Hidden
 Parameter Hidden = 0x0
 Parameter ReadCacheEnable
 Parameter ReadCacheEnable = 0x1
 Parameter WriteCacheEnable
 Parameter WriteCacheEnable = 0x1
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x42
 Parameter PreferedTransferMode
 Parameter PreferedTransferMode = 0xffffffff
 Parameter AdvancedPowerMode
 Parameter AdvancedPowerMode = 0x80
 Parameter AcousticMgmt
 Parameter AcousticMgmt = 0x80
 Parameter StandbyTimer
 Parameter StandbyTimer = 0x0
 Parameter ReadOnly
 Parameter ReadOnly = 0x0
 Parameter GeomType
 Parameter GeomType = 0xffffffff
 Parameter Hidden
 Parameter Hidden = 0x0
se75) = 0x8
  Reg_0x6 (0x176) = 0xa0
  Reg_0x7 (0x177) = 0x50
  BM_0x0 (0xfff8) = 0x0
  BM_0x1 (0xfff9) = 0x0
  BM_0x2 (0xfffa) = 0x24
  BM_0x3 (0xfffb) = 0x0
clean IDE intr 0
clean IDE intr 1
  DMA status 0x24
  clear unexpected DMA intr
AtapiDmaDone: dev 0
claim Compatible controller
claim Secondary
AtapiDmaAlloc: allocate tmp buffers below 4Gb
AtapiVirtToPhysAddr_: 97000 -> 00000000:03147000
exit: init spinlock
MasterDev=0x1, NumberChannels=0x1, Isr2DevObj=0xb02db4e8
Init ISR:
Unnecessary
MasterDev=0x1, NumberChannels=0x1, Isr2DevObj=0xb02db4e8
do not tell system, that we know about PCI IO ranges
final chan[2] InterruptMode: 1, Level 15, Level2 0, Vector 0, Vector2 0
return SP_RETURN_FOUND
Attempt 0 of MasterDev ok
(../../ntoskrnl/io/iomgr/iorsrce.c:874) IoRepo pciData.Command = 0x5
PCI_ENABLE_BUS_MASTER
InterruptLine = 0x0
Final pciData.Command = 0x5
AtapiChipInit: dev 0xffffffff, ph chan 1, c 0
HwFlags: 0x0
VendorID/DeviceID/Rev 0x8086/0x7111/0x1
FindDevices:
AtapiDisableInterrupts_0: 0
  max_ldev 2
CheckDevice: Device 0x0
CheckDevice: reset dev
AtapiSoftReset:
  statusByte2 50:
  DMA status 0x4
  clear unexpected DMA intr on ATAPI reset
Atapime
  ATAPI at home
CheckDevice: status 0x0
CheckDevice: ATAPI signature found
IssueIdentify: Checking for ATAPI. Status (0x0)
IssueIdentify: Checking for ATAPI (2). Status (0x0)
AtaCommand48: cntrlr 0x0:0x1 dev 0x0, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0
IssueIdentify: IDE_STATUS_DRQ (0x58)
IssueIdentify: Status before read words 0x58
IssueIdentify: statusByte 0x58
IssueIdentify: BASE status after read words 0x50
Model: DC2-42-E B          
FW:    .7G6
S/N:                       
Pio:   2
APio:  3
SWDMA: 0
MWDMA: 0
UDMA:  4/7
SATA:  0
SATA support: 0, CAPs 0x0
OrigTransferMode: 42, Active: 42
Accoustic 0, cur 0
AdvPowerMode 0, cur 0
InitBadBlocks local
LunExt 0xb02b7008
S/N:CD-224E-B_______________________________-____________________
IssueIdentify: Device does not interrupe is CD/Optical drive.
IssueIdentify: final Status on exit (0x50)
CheckDevice: Device 0x0 is ATAPI
CheckDevice: check status: found
CheckDevice: Device 0x1
CheckDevice: reset dev
AtapiSoftReset:
  statusByte2 50:
  DMA status 0x0
  HDD at home
  HDD at home
CheckDevice: status 0x1
CheckDevice: IDE device check
IssueIdentify: Checking for IDE. Status (0x0)
IssueIdentify: statusByte != IDE_STATUS_IDLE
IssueIdentify: no dev (dev 1)
CheckDevice: check status: not found
FindDevices: select 0 dev to clear INTR
FindDevices: statusByte=0x50
FindDevices: select 1 dev to clear INTR
FindDevices: statusByte=0x1
FindDevices: select 0 dev on exit
AtapiEnableInterrupts_0: 1
FindDevices: returning 1
AtapiHwInitialize: lChannel 0x0, dev 0
AtapiDisableInterrupts_0: 0
AtapiHwInitialize: ATAPI/Changer branch
  try mode 0x42
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
AtaSetTransferMode: Set 0x42 on Device 0/0
AtaCommand48: cntrlr 0x0:0x1 dev 0x0, cmd 0xef, lba 0x0 count 0x42 feature 0x3
  Status 0x50
Using 0x42 mode
AtapiEnableInterrupts_0: 1
AtapiHwInitialize: lChannel 0x0, dev 1
AtapiHwInitialize: (base) done
Intr: VendorID+DeviceID/Rev 0x71118086/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 2
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x71118086/0x1
  SRB 0xfb2d5f90, CDB 0xfb2d5fc0, AtaReq 0xb0286000, SCmd 0x12
UniataNeedQueueing: TopLevel, qd=0
Send to device 12
TopLevel (2), srb 0xfb2d5f90
TopLevel (3), AtaReq 0xb0286000
Try ATAPI send 12
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: BuildMechanismStatusSrb()
 MechanismStatusSrb 0xb0310b6c
AtapiSendCommand: AtapiSendCommand recursive
AtapiSendCommand: req state 0x20, Action 3
AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb b0310b9c)
  assume IN
AtapiSendCommand: use_dma=0, Cmd bd
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiDmaReinit: set PIO mode on Device 0 (42 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x0:0x1 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
  Status 0x50
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b0310b9c Command 0xbd to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiSendCommand: SRB_STATUS_PENDING (2)
AtapiStartIo: next Srb fb2d5f90
AtapiStartIo: query PORT for next request
Intr: VendorID+DeviceID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x51
  base status 0x51
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x51)
AtapiInterrupt: iReason 3
AtapiInterrupt: Error 0x64
  Bad Lba 0x0
  wait 10 ready after ATAPI error
  Intr on DRQ 0
AtapiInterrupt: ATAPI Error, int reason 3
Errors in PIO mode
AtapiInterrupt: Error
AtapiInterrupt: CompleteRequest, srbstatus 4
AtapiInterrupt: OriginalSrb != NULL
AtapiInterrupt: SCSIOP_MECHANISM_STATUS status 0x4
 RequestSenseSrb 0xb0310b6c
AtapiSendCommand: req state 0x50, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b0310b9c)
  assume IN
AtapiSendCommand: SCSIOP_REQUEST_SENSE, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 3
AtapiSendCommand: SCSIOP_REQUEST_SENSE -> no dma setup (2)
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b0310b9c Command 0x3 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x51
  continue with SCSIOP_REQUEST_SENSE
AtapiSendCommand: Entry Status (0x51)
AtapiSendCommand: Poll for int. to send packet. Status (0x51)
AtapiSendCommand: status (0x58)
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiInterrupt: chan->ExpectingInterrupt 1 (1)
AtapiInterrupt: send orig SRB_STATUS_PENDING (1)
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x48
  base status 0x48
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x48)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x48
AtapiInterrupt: get R wordCount 0x9
IdeIntr: Read 0x9 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xb0310b54, srb->DataBuffer 0xb0310b54
70 00 06 00 00 00 00 0a 00 00 00 00 29 00 00 00 
00 00 
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: OriginalSrb != NULL
AtapiInterrupt: ATAPI command status 0x1
AtapiInterrupt: MechStatusRetryCount 0x3
 MechanismStatusSrb 0xb0310b6c
AtapiSendCommand: req state 0x50, Action 3
AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb b0310b9c)
  assume IN
AtapiSendCommand: use_dma=0, Cmd bd
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b0310b9c Command 0xbd to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiInterrupt: chan->ExpectingInterrupt 1 (2)
AtapiInterrupt: send orig SRB_STATUS_PENDING (2)
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x48
  base status 0x48
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x48)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x48
AtapiInterrupt: get R wordCount 0x4
IdeIntr: Read 0x4 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xb0310b4c, srb->DataBuffer 0xb0310b4c
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: OriginalSrb != NULL
AtapiInterrupt: SCSIOP_MECHANISM_STATUS status 0x1
AtapiSendCommand: req state 0x50, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 12 (Cdb fb2d5fc0)
  assume IN
AtapiSendCommand: use_dma=0, Cmd 12
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb fb2d5fc0 Command 0x12 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiInterrupt: chan->ExpectingInterrupt 1 (1)
AtapiInterrupt: send orig SRB_STATUS_PENDING (1)
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x48
  base status 0x48
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x48)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x48
AtapiInterrupt: get R wordCount 0x12
IdeIntr: Read 0x12 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xfb262ed8, srb->DataBuffer 0xfb262ed8
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xfb262efc, srb->DataBuffer 0xfb262ed8, len 0x24
   Transfered 3e, full size 24
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xfb2d5f90, status 1
AtapiInterrupt: RequestComplete, srb 0xfb2d5f90
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
  Unexpected interrupt.
  OurInterrupt = 2
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x1:0x0
   VendorID+DeviceID/Rev 0x71118086/0x1
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xfb2d5f90 complete with status 0xa
AtapiStartIo: UniataRemoveRequest(0, fb2d5f90)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: ch  DMA status 0x4
  clear unexpected DMA intr on ATAPI reset
AtapiDmaDone: dev 1
  HDD at home
  HDD at home
CheckDevice: status 0x1
CheckDevice: IDE device check
IssueIdentify: Checking for IDE. Status (0x0)
IssueIdentify: statusByte != IDE_STATUS_IDLE
IssueIdentify: no dev (dev 1)
CheckDevice: check status: not found
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xfb2d5f90 complete with status 0xa
AtapiStartIo: AtapiDmaDBSync(b0310b30, fb2d5f90)
AtapiStartIo: UniataRemoveRequest(b0310b30, fb2d5f90)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b0310b30, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
Intr: VendorID+DeviceID/Rev 0x71118086/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  IDE status 0x1
  base status 0x1
  no DRQ/DRDY set
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = ORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x1:0x0
   VendorID+DeviceID/Rev 0x71118086/0x1
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xfb2d5f90 complete with status 0xa
AtapiStartIo: UniataRemoveRequest(0, fb2d5f90)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: querypLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1
   VendorID+DeviceID/Rev 0x71118086/0x1
AtapiStartIo: SRB rejected
S i 1, BistLen 1
 Parameter IgnoreIsa
 Parameter IgnoreIsa = 0x0


ATAPI IDE: Look for ISA Controllers
AtapiFindController:
  assume max PIO4
allocate 2 Luns for 1 channels
AtapiSetupLunPtrs for channel 0 of 1, 2 luns 
  Chan 0xb0285b30
  Lun 0x0
  Lun ptr 0xb030c008
  Lun 0x1
  Lun ptr 0xb030c310
AtapiReadChipConfig: devExt 0xb02852b4
AtapiReadChipConfig: dev 0xffffffff, p ForceSimplex
 Parameter ForceSimplex = 0x0
MaxTransferMode (base): 0xc
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0xc
MaxTransferMode (overriden): 0xc
 Parameter Force80pin
 Parameter Force80pin = 0x0
 Parameter AtapiDmaZeroTransfer
 Parameter AtapiDmaZeroTransfer = 0x0
 Parameter AtapiDmaControlCmd
 Parameter AtapiDmaControlCmd = 0x0
 Parameter AtapiDmaRawRead
 Parameter AtapiDmrmaReadWrite
 Parameter AtapiDmaReadWrite = 0x1
AtapiChipInit: dev 0xffffffff, ph chan -1, c -1
HwFlags: 0x0
VendorID/DeviceID/Rev 0x0/0x0/0x0
 Parameter PortBase
 Parameter PortBase = 0x0
 Parameter Irq
 Parameter Irq = 0x0
AtapiFindController: AtdiskPrimaryClaimed
 Parameter PortBase
 Parameter PortBase = 0x0
 Parameter Irq
 Parameter Irq = 0x0
AtapiFindController: AtdiskSecondaryameteortBase = 0x0
 Parameter Irq
 Parameter Irq = 0x0
  BaseIoAddre0x0
  BaseIoAddress1=168
  BaseIoAddress2=36e
  AltStatus (0xff)
  Reg_0x1 (0x169) = 0xff
  Reg_0x2 (0x16a) = 0xff
  Reg_0x3 (0x16b) = 0xff
  Reg_0x4 (0x16c) = 0xff
  Reg_0x5 (0x16d) = 0xff
  Reg_0x6 (0x16e) = 0xff
  Reg_0x7 (0x16f) = 0xff
  BM_0x0 (0x0) = 0x0
  BM_0x1 (0x0) = 0x0
  BM_0x2 (0x0) = 0x0
  BM_0x3 (0x0) = 0x0
ler: Identifier read back from Slave (0xff)
AtapiFindController: return SP_RETURN_NOT_FOUND
ScsiPortInitialize Status 0xc00000c0
 Parameter IgnoreMca
 Parameter IgnoreMca = 0x0


ATAPI IDE: Look for MCA Controllers
ScsiPortInitialize Status 0xc00000c0


Leave UNIATA MiniPort DriverEntry (../../ntoskrnl/io/iomgr/driver.c:1630) '\Driver\buslogic' initialization failed, status (0xc00000c0)
(../../ntoskrnl/io/iomgr/driver.c:64) Deleting driver object '\Driver\buslogic'
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x71118086/0x1
  SRB 0xfb2d6360, CDB 0xfb2d6390, AtaReq 0xb0286000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xfb2d6360
TopLevel (3), AtaReq 0xb0286000
Try ATAPI send 25
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb fb2d6390)
  assume IN
AtapiSendCommand: use_dma=0, Cmd 25
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb fb2d6390 Command 0x25 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb fb2d6360
AtapiStartIo: query PORT for next request
IDmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x48
  base status 0x48
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x48)
AtapiInterrupt: iReasoupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x48
AtapiInterrupt: get R wordCount 0x4
IdeIntr: Read 0x4 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xfb262468, srb->DataBuffer 0xfb262468
  status re-check 0x50
AtapiInteUiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
  Unexpected interrupt.
  OurInt
nterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+ouse_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb fb2d6394 Command 0xbd to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_364
AtapiStartIo: query PORT for next request
Intr: VendorID+DeviceID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterruptPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x48
AtapiInterrupt: get R wordCount 0x4
IdeIntr: Read 0x4 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xfb262468, srb->DataBuffer 0xfb262468
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIion,t BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xfb262470, srb->DataBuffer 0xfb262468, len 0x8
   Transfered 8, full size 8
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xfb2d6364, statulr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
  Unexpected interrupt.
  OurInterrupt = 2
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VenS2d63ec, CDB 0xfb2d641c, AtaReq 0xb0286000, SCmd 0x1a
UniataNeedQueueing: TopLevel, qd=0
Send to device 1a
TopLevel (2), srb 0xfb2mmand: Entry Status (0x50)
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb fb2d63ec
AtapiStartIo: query PORT for next request
Intr: VendorID+DeviceID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(bcked
apiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x51
  base status 0x51
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI EntestapiInterrupt: Error 0x54
  Bad Lba 0x0
  wait 10 ready after ATAPI error
  Intr on DRQ 0
AtapiInterrupt: ATAPI Error, int reason 3
Errors in PIO mode
AtapiInterrupt: Error
AtapiInterrupt: CompleteRequest, srbstatus 4
AtapiInterrupt: Error. Begin mapping...
MapError: Error register is 0x54
ATAPI: Illegal request
AtapiInterrupt: Check for underflow, AtaReq->WordsLeft a
AtapiInterrb 0xfb2d63ec, i0x0
   VendorID+DeviceID/Rev 0x71118086/0x1
  SRB 0xb0325418, CDB 0xb0325448, AtaReq 0xb0286000, SCmd 0x3
UniataNeedQueueing: TopLevel, qd=0
Send to device 3
TopLevel (2), srb 0xb0325418
TopLevel (3), AtaReq 0xb0286000
Try ATAPI send 3
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b0325448)
  assume IN
AtapiSendCommand: SCSIOP_REQUEST_SENSE, no DMA setup
Atad: SCSIOP_REQUEST_SENSE -> no dma setup (2)
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b0325448 Command 0x3 to TargetId 0 lun 0
AtapiSendComequest
Intr: VendorID+DeviceID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x48
  base status 0x48
AtapiCheckI0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x48)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x48
AtapiInterrupt: get R wordCount 0x9
IdeIntr: Read 0x9 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xfb2610d0, srb->DataBuffer 0xfb2610d0
70 ansfered 12, full size 12
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xb0325418, status 1
AtapiInterrupt: RequestComplete, srb 0xb0325418
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1rse): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
  Unexpected interrupt.
  OurInterrupt = 2
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit witrep., ATAPI CMD 5a (Cdb fb2d641c)
  assume IN
AtapiSendCommand: use_dma=0, Cmd 5a
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb fb2d641c Command 0x5a to TargetId 0 lun 0
AtapiSendCommand: Entered withoPoll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb fb2d63ec
AtapiStartIo: query PORT for next request
Intr: VendorID+DeviceID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
n: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xfb2620d8, srb->DataBuffer 0xfb2620c8, len 0x18
AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xfb2d63ec, status 12
AtapiInterrupt: RequestComplete, srb 0xfb2d63ec
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA inATAPI send be
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD be (Cdb fb2d641c)
  assume 0-transfer
AtapiSendCommand: zero transfer, no DMA setup
AtapiSendCommand: use_dma=0, Cmd be
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: useCommand: Cdb fb2d641c Command 0xbe to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb fb2d63ec
AtapiSt CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: wordCount 0x0, WordsTransfered 0x0
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion