(ntoskrnl/kd/kdio.c:376) ----------------------------------------------------- (ntoskrnl/kd/kdio.c:377) ReactOS 0.4-SVN (Build 20151210-r70321) (ntoskrnl/kd/kdio.c:379) 1 System Processor [3071 MB Memory] (ntoskrnl/kd/kdio.c:380) Command Line: DEBUG DEBUGPORT=COM1 BAUDRATE=115200 SOS MININT (ntoskrnl/kd/kdio.c:384) ARC Paths: multi(0)disk(0)cdrom(111) \ multi(0)disk(0)cdrom(111) \reactos\ (ntoskrnl/ke/i386/cpu.c:450) Supported CPU features : KF_V86_VIS KF_RDTSC KF_CR4 KF_CMOV KF_GLOBAL_PAGE KF_LARGE_PAGE KF_MTRR KF_CMPXCHG8B KF_MMX KF_WORKING_PTE KF_PAT KF_FXSR KF_FAST_SYSCALL KF_XMMI KF_XMMI64 KF_DTS KF_NX_BIT (ntoskrnl/ke/i386/cpu.c:722) Prefetch Cache: 64 bytes L2 Cache: 3145728 bytes L2 Cache Line: 64 bytes L2 Cache Associativity: 12 (ntoskrnl/mm/ARM3/mminit.c:1443) HAL I/O Mapping at FFFE0000 is unsafe (ntoskrnl/mm/mminit.c:132) 0x80000000 - 0x83800000 Boot Loaded Image (ntoskrnl/mm/mminit.c:136) 0xB0000000 - 0xB1500000 PFN Database (ntoskrnl/mm/mminit.c:140) 0xB1500000 - 0xB74B0000 ARM3 Non Paged Pool (ntoskrnl/mm/mminit.c:144) 0xB9400000 - 0xBB400000 System View Space (ntoskrnl/mm/mminit.c:148) 0xBB400000 - 0xC0000000 Session Space (ntoskrnl/mm/mminit.c:151) 0xC0000000 - 0xC03FFFFF Page Tables (ntoskrnl/mm/mminit.c:154) 0xC0300000 - 0xC0300FFF Page Directories (ntoskrnl/mm/mminit.c:157) 0xC0400000 - 0xC07FFFFF Hyperspace (ntoskrnl/mm/mminit.c:161) 0xE1000000 - 0xECC00000 ARM3 Paged Pool (ntoskrnl/mm/mminit.c:164) 0xECC00000 - 0xF7BE0000 System PTE Space (ntoskrnl/mm/mminit.c:167) 0xF7BE0000 - 0xFFBE0000 Non Paged Pool Expansion PTE Space (ntoskrnl/config/cmcheck.c:25) CmCheckRegistry(0xB7226008, 2) is UNIMPLEMENTED! (ntoskrnl/config/cmsysini.c:793) CmpCreateControlSet() done (hal/halx86/legacy/bussupp.c:688) Your machine has a PCI-to-PCI or CardBUS Bridge. PCI devices may fail! (hal/halx86/legacy/bussupp.c:717) Found parent bus (indicating PCI Bridge). PCI devices may fail! ====== PCI BUS HARDWARE DETECTION ======= 00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 10) Subsystem: P5KPL-VM Motherboard [1043:82b0] Flags: bus master, fast devsel, latency 0 00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 10) Subsystem: Unknown [0000:0000] Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at 00020200 (32-bit, non-prefetchable) [size=512] Memory at 2000e0e0 (32-bit, non-prefetchable) [size=8K] Memory at feb0fa00 (32-bit, non-prefetchable) [size=512] I/O ports at dff1d000 [size=4K] 00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 01) Subsystem: P5KPL-CM Motherboard [1043:82ea] Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at f9ef8000 (64-bit, non-prefetchable) [size=32K] Device is using IRQ 11! ISA Cards using that IRQ may fail! 00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) Subsystem: P5KPL-VM,P5LD2-VM Mainboard [1043:8179] Flags: bus master, medium devsel, latency 0, IRQ 05 I/O ports at b000 [size=4K] Device is using IRQ 5! ISA Cards using that IRQ may fail! Device is an Intel UHCI (USB) Controller. Turn off Legacy USB in your BIOS! 00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 01) Subsystem: P5KPL-VM,P5LD2-VM Mainboard [1043:8179] Flags: bus master, medium devsel, latency 0, IRQ 15 I/O ports at b080 [size=128] Device is using IRQ 15! ISA Cards using that IRQ may fail! Device is an Intel UHCI (USB) Controller. Turn off Legacy USB in your BIOS! 00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 01) Subsystem: P5KPL-VM,P5LD2-VM Mainboard [1043:8179] Flags: bus master, medium devsel, latency 0, IRQ 10 I/O ports at b400 [size=1K] Device is using IRQ 10! ISA Cards using that IRQ may fail! Device is an Intel UHCI (USB) Controller. Turn off Legacy USB in your BIOS! 00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] (rev 01) Subsystem: P5KPL-VM,P5LD2-VM Mainboard [1043:8179] Flags: bus master, medium devsel, latency 0, IRQ 11 I/O ports at b480 [size=128] Device is using IRQ 11! ISA Cards using that IRQ may fail! Device is an Intel UHCI (USB) Controller. Turn off Legacy USB in your BIOS! 00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 01) Subsystem: P5KPL-VM,P5LD2-VM Mainboard [1043:8179] Flags: bus master, medium devsel, latency 0, IRQ 05 Memory at f9effc00 (32-bit, non-prefetchable) [size=1K] Device is using IRQ 5! ISA Cards using that IRQ may fail! Device is an Intel UHCI (USB) Controller. Turn off Legacy USB in your BIOS! 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) Subsystem: Unknown [0000:0000] Flags: bus master, fast devsel, latency 0 Memory at 20010100 (32-bit, non-prefetchable) [size=256] Memory at 2280d0d0 (32-bit, non-prefetchable) [size=4K] Memory at f9f0f9f0 (32-bit, non-prefetchable) [size=256] I/O ports at 1fff0 [size=16] 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01) Subsystem: P5KPL-VM Motherboard [1043:8179] Flags: bus master, medium devsel, latency 0 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) Subsystem: P5KPL-VM Motherboard [1043:8179] Flags: bus master, medium devsel, latency 0, IRQ 10 I/O ports at c080 [size=128] I/O ports at c000 [size=16K] I/O ports at 08f0 [size=16] I/O ports at 08f8 [size=8] I/O ports at b800 [size=2K] 00:1f.2 IDE interface [0101]: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] [8086:27c0] (rev 01) Subsystem: P5KPL-VM Motherboard [1043:8179] Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 15 I/O ports at cc00 [size=1K] I/O ports at c880 [size=128] I/O ports at c800 [size=2K] I/O ports at c480 [size=128] I/O ports at c400 [size=1K] 00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] (rev 01) Subsystem: P5KPL-VM Motherboard [1043:8179] Flags: medium devsel, latency 0, IRQ 15 I/O ports at 0400 [size=1K] Device is using IRQ 15! ISA Cards using that IRQ may fail! 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8169 PCI Gigabit Ethernet Controller [10ec:8169] (rev 10) Subsystem: RTL8169/8110 Family PCI Gigabit Ethernet NIC [10ec:8169] Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 03 I/O ports at d800 [size=2K] Memory at f9fffc00 (32-bit, non-prefetchable) [size=1K] Device is using IRQ 3! ISA Cards using that IRQ may fail! 02:00.0 VGA compatible controller [0300]: NVIDIA Corporation G92 [GeForce 9800 GT] [10de:0614] (rev a2) Subsystem: Unknown [1019:1a0e] Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at fa000000 (64-bit, non-prefetchable) [size=32M] I/O ports at ec00 [size=1K] Device is using IRQ 11! ISA Cards using that IRQ may fail! ====== PCI BUS DETECTION COMPLETE ======= PC Compatible Eisa/Isa HAL Detected (ntoskrnl/ps/apphelp.c:442) SHIMS: ApphelpCacheInitialize (ntoskrnl/ps/apphelp.c:277) SHIMS: ApphelpCacheParse walking 0 entries (ntoskrnl/ps/apphelp.c:460) SHIMS: ApphelpCacheInitialize: 1 (ntoskrnl/wmi/wmi.c:72) IoWMIRegistrationControl() called for DO B746FA80, requesting 1 action, returning success (lib/rtl/image.c:171) Invalid base address: 00000000 (ntoskrnl/io/iomgr/driver.c:1629) '\Driver\SACDRV' initialization failed, status (0xc0000037) (ntoskrnl/io/iomgr/driver.c:64) Deleting driver object '\Driver\SACDRV' (hal/halx86/legacy/bussupp.c:1253) Slot assignment for 5 on bus 0 (hal/halx86/legacy/bus/pcibus.c:727) WARNING: PCI Slot Resource Assignment is FOOBAR (hal/halx86/legacy/bussupp.c:1253) Slot assignment for 5 on bus 0 (hal/halx86/legacy/bus/pcibus.c:727) WARNING: PCI Slot Resource Assignment is FOOBAR (ntoskrnl/io/iomgr/driver.c:1629) '\Driver\BUSLOGIC' initialization failed, status (0xc00000c0) (ntoskrnl/io/iomgr/driver.c:64) Deleting driver object '\Driver\BUSLOGIC' (ntoskrnl/io/iomgr/driver.c:64) Deleting driver object '\Driver\CDFS' (ntoskrnl/mm/ARM3/sysldr.c:954) Leaking driver: cdfs.sys WARNING: DfsDriverEntry at drivers/filesystems/mup/mup.c:2563 is UNIMPLEMENTED! (drivers/ksfilter/swenum/swenum.c:428) SWENUM loaded (hal/halx86/legacy/halpnpdd.c:793) Illegal IRP: c (hal/halx86/legacy/halpnpdd.c:793) Illegal IRP: c (hal/halx86/legacy/halpnpdd.c:793) Illegal IRP: 15 (ntoskrnl/io/pnpmgr/pnpinit.c:321) IopOpenRegistryKeyEx() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:734) ZwOpenKey() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:734) ZwOpenKey() failed with Status C0000034 (hal/halx86/legacy/halpnpdd.c:793) Illegal IRP: d (hal/halx86/legacy/halpnpdd.c:793) Illegal IRP: 14 (ntoskrnl/io/pnpmgr/pnpmgr.c:4059) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (ntoskrnl/io/pnpmgr/pnpinit.c:321) IopOpenRegistryKeyEx() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:734) ZwOpenKey() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:734) ZwOpenKey() failed with Status C0000034 (ntoskrnl/io/pnpmgr/pnpmgr.c:4059) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (ntoskrnl/mm/ARM3/sysldr.c:3024) ZwOpenFile failed for '\SystemRoot\system32\drivers\vbemp.sys' with status 0xc000003a (ntoskrnl/mm/ARM3/sysldr.c:3024) ZwOpenFile failed for '\SystemRoot\system32\drivers\vbemp.sys' with status 0xc000003a (ntoskrnl/io/pnpmgr/pnpinit.c:321) IopOpenRegistryKeyEx() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:734) ZwOpenKey() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:734) ZwOpenKey() failed with Status C0000034 (hal/halx86/legacy/bus/pcibus.c:698) HAL: No PCI Resource Adjustment done! Hardware may malfunction (ntoskrnl/io/pnpmgr/pnpmgr.c:4059) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (ntoskrnl/io/pnpmgr/pnpinit.c:321) IopOpenRegistryKeyEx() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:734) ZwOpenKey() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:734) ZwOpenKey() failed with Status C0000034 (ntoskrnl/io/pnpmgr/pnpmgr.c:4059) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (ntoskrnl/io/pnpmgr/pnpinit.c:321) IopOpenRegistryKeyEx() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:734) ZwOpenKey() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:734) ZwOpenKey() failed with Status C0000034 (hal/halx86/legacy/bus/pcibus.c:698) HAL: No PCI Resource Adjustment done! Hardware may malfunction (ntoskrnl/io/pnpmgr/pnpmgr.c:4059) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (ntoskrnl/io/pnpmgr/pnpinit.c:321) IopOpenRegistryKeyEx() failed with Status C0000034 (lib/drivers/libusb/hub_controller.cpp:3991) There was no pending IRP for SCE. Did the usb hub 2.0 driver (usbhub2) load? (ntoskrnl/io/iomgr/driver.c:734) ZwOpenKey() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:734) ZwOpenKey() failed with Status C0000034 (ntoskrnl/io/pnpmgr/pnpmgr.c:4059) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (ntoskrnl/io/pnpmgr/pnpinit.c:321) IopOpenRegistryKeyEx() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:734) ZwOpenKey() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:734) ZwOpenKey() failed with Status C0000034 (hal/halx86/legacy/bus/pcibus.c:698) HAL: No PCI Resource Adjustment done! Hardware may malfunction (ntoskrnl/io/pnpmgr/pnpmgr.c:4059) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (ntoskrnl/io/pnpmgr/pnpinit.c:321) IopOpenRegistryKeyEx() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:734) ZwOpenKey() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:734) ZwOpenKey() failed with Status C0000034 (ntoskrnl/io/pnpmgr/pnpmgr.c:4059) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (ntoskrnl/io/pnpmgr/pnpinit.c:321) IopOpenRegistryKeyEx() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:734) ZwOpenKey() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:734) ZwOpenKey() failed with Status C0000034 (hal/halx86/legacy/bus/pcibus.c:698) HAL: No PCI Resource Adjustment done! Hardware may malfunction (lib/drivers/libusb/hub_controller.cpp:334) [USBUHCI] Change state on port 1 (ntoskrnl/io/pnpmgr/pnpmgr.c:4059) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (ntoskrnl/io/pnpmgr/pnpinit.c:321) IopOpenRegistryKeyEx() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:734) ZwOpenKey() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:734) ZwOpenKey() failed with Status C0000034 (ntoskrnl/io/pnpmgr/pnpmgr.c:4059) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (ntoskrnl/io/pnpmgr/pnpinit.c:321) IopOpenRegistryKeyEx() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:734) ZwOpenKey() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:734) ZwOpenKey() failed with Status C0000034 (hal/halx86/legacy/bus/pcibus.c:698) HAL: No PCI Resource Adjustment done! Hardware may malfunction (drivers/usb/usbehci/hardware.cpp:367) Controller Capabilities Length 0x20 (drivers/usb/usbehci/hardware.cpp:368) Controller EHCI Version 0x100 (drivers/usb/usbehci/hardware.cpp:369) Controller EHCI Caps HCSParamsLong 0x104208 (drivers/usb/usbehci/hardware.cpp:370) Controller EHCI Caps HCCParamsLong 0x6871 (drivers/usb/usbehci/hardware.cpp:371) Controller has 8 Ports (drivers/usb/usbehci/hardware.cpp:256) Controller Port Routing Rules 0 (drivers/usb/usbehci/hardware.cpp:257) Number of Ports per Companion Controller 2 (drivers/usb/usbehci/hardware.cpp:258) Number of Companion Controller 4 (drivers/usb/usbehci/hardware.cpp:267) Controller has Debug Port Support At Port 1 (drivers/usb/usbehci/hardware.cpp:272) Controller has Extended Capabilities Support (drivers/usb/usbehci/hardware.cpp:287) Controller uses 64-Bit Addressing (drivers/usb/usbehci/hardware.cpp:489) Starting Controller (drivers/usb/usbehci/hardware.cpp:563) [EHCI] Extended Caps Support detected! (drivers/usb/usbehci/hardware.cpp:581) [EHCI] Controller is BIOS owned, acquiring control (drivers/usb/usbehci/hardware.cpp:626) [EHCI] acquired ownership (drivers/usb/usbehci/hardware.cpp:714) Interrupt Mask 37 (drivers/usb/usbehci/hardware.cpp:813) UsbSts c000 (drivers/usb/usbehci/hardware.cpp:816) UsbCmd.PeriodicEnable 1 (drivers/usb/usbehci/hardware.cpp:817) UsbCmd.AsyncEnable 1 (drivers/usb/usbehci/hardware.cpp:818) UsbCmd.IntThreshold 8 (drivers/usb/usbehci/hardware.cpp:819) UsbCmd.Run 1 (drivers/usb/usbehci/hardware.cpp:820) UsbCmd.FrameListSize 0 (drivers/usb/usbehci/hardware.cpp:827) EHCI Started! (drivers/usb/usbehci/hardware.cpp:1394) Device connected on port 3 (drivers/usb/usbehci/hardware.cpp:1405) Low speed device connected. Releasing ownership (drivers/usb/usbehci/hardware.cpp:1418) Device disconnected on port 3 (ntoskrnl/io/pnpmgr/pnpmgr.c:4059) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (ntoskrnl/io/pnpmgr/pnpinit.c:321) IopOpenRegistryKeyEx() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:734) ZwOpenKey() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:734) ZwOpenKey() failed with Status C0000034 (ntoskrnl/io/pnpmgr/pnpmgr.c:4059) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (ntoskrnl/io/pnpmgr/pnpinit.c:321) IopOpenRegistryKeyEx() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:734) ZwOpenKey() failed with Status C0000034 (ntoskrnl/io/iomgr/driver.c:734) ZwOpenKey() failed with Status C0000034 (ntoskrnl/io/pnpmgr/pnpmgr.c:4059) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (ntoskrnl/mm/ARM3/sysldr.c:3024) ZwOpenFile failed for '\SystemRoot\system32\drivers\vbemp.sys' with status 0xc000003a (lib/drivers/libusb/hub_controller.cpp:2705) USBHI_CreateUsbDevice (drivers/usb/usbuhci/usb_queue.cpp:339) [USBUHCI] Error detected at descriptor F7786100 Physical 10c100 (drivers/usb/usbuhci/usb_queue.cpp:354) [USBUHCI] ErrorBuffer 0 TimeOut 40000 Nak 0 BitStuff 0 (drivers/usb/usbuhci/usb_request.cpp:1233) [USBUHCI] Error detected at descriptor F7786100 Physical 10c100 (drivers/usb/usbuhci/usb_request.cpp:1253) [USBUHCI] Timeout detected in descriptor F7786100 Index 0 (lib/drivers/libusb/usb_device.cpp:176) [USBUHCI] Failed to get device descriptor with c0000001 (lib/drivers/libusb/hub_controller.cpp:2750) USBHI_CreateUsbDevice: failed to initialize usb device c0000001 (drivers/usb/usbhub/fdo.c:1241) USBHUB: CreateUsbDevice failed with status c0000001 (lib/drivers/libusb/hub_controller.cpp:334) [USBUHCI] Change state on port 1 (drivers/usb/usbhub/fdo.c:273) Device connected from port 2 (lib/drivers/libusb/hub_controller.cpp:3991) There was no pending IRP for SCE. Did the usb hub 2.0 driver (usbhub2) load? (lib/drivers/libusb/hub_controller.cpp:334) [USBUHCI] Change state on port 1 (lib/drivers/libusb/hub_controller.cpp:2705) USBHI_CreateUsbDevice *** Fatal System Error: 0x0000007f (0x00000008,0x00000000,0x00000000,0x00000000)  Entered debugger on embedded INT3 at 0x0008:0x8093f0d8. kdb:> bt Eip: Frames: <0000000e> Couldn't access memory at 0x0000EB20! kdb:> disasm : ret $0x4 : push %ebp : mov %esp,%ebp : mov 0x10(%ebp),%eax : mov 0x8(%ebp),%ecx : mov 0xc(%ebp),%edx : int $0x2d : int3 : pop %ebp : ret $0xc kdb:> thread list No threads in current process! kdb:> regs CS:EIP 0x0008:0x8093f0d9 SS:ESP 0x0010:0x809ddb94 EAX 0x00000003 EBX 0x00000000 ECX 0x809dd97c EDX 0xffffffff ESI 0x00000000 EDI 0x00000000 EBP 0x809ddbd8 EFLAGS 0x00004046 PF ZF IOPL0 NT kdb:>