OnCreate(../ntoskrnl/kd/kdio.c:376) -----------------------------------------------------
(../ntoskrnl/kd/kdio.c:377) ReactOS 0.5-SVN (Build 20160509-r71301)
(../ntoskrnl/kd/kdio.c:379) 1 System Processor [1023 MB Memory]
(../ntoskrnl/kd/kdio.c:380) Command Line: NOGUIBOOT KDSERIAL DEBUGPORT=COM1 FIRSTCHANCE
(../ntoskrnl/kd/kdio.c:384) ARC Paths: multi(0)disk(0)cdrom(31) \ multi(0)disk(0)cdrom(31) \reactos\
(../ntoskrnl/ke/i386/cpu.c:450) Supported CPU features : KF_V86_VIS KF_RDTSC KF_CR4 KF_CMOV KF_GLOBAL_PAGE KF_LARGE_PAGE KF_MTRR KF_CMPXCHG8B KF_MMX KF_WORKING_PTE KF_PAT KF_FXSR KF_FAST_SYSCALL KF_XMMI       
(../ntoskrnl/ke/i386/cpu.c:722) Prefetch Cache: 32 bytesL2 Cache: 262144 bytesL2 Cache Line: 64 bytesL2 Cache Associativity: 8
(../ntoskrnl/mm/ARM3/mminit.c:1443) HAL I/O Mapping at FFFE0000 is unsafe
(../ntoskrnl/mm/mminit.c:132)           0x80000000 - 0x83000000Boot Loaded Image
(../ntoskrnl/mm/mminit.c:136)           0xB0000000 - 0xB0701000PFN Database
(../ntoskrnl/mm/mminit.c:140)           0xB0701000 - 0xB26C1000ARM3 Non Paged Pool
(../ntoskrnl/mm/mminit.c:144)           0xB9400000 - 0xBB400000System View Space
(../ntoskrnl/mm/mminit.c:148)           0xBB400000 - 0xC0000000Session Space
(../ntoskrnl/mm/mminit.c:151)           0xC0000000 - 0xC03FFFFFPage Tables
(../ntoskrnl/mm/mminit.c:154)           0xC0300000 - 0xC0300FFFPage Directories
(../ntoskrnl/mm/mminit.c:157)           0xC0400000 - 0xC07FFFFFHyperspace
(../ntoskrnl/mm/mminit.c:161)           0xE1000000 - 0xECC00000ARM3 Paged Pool
(../ntoskrnl/mm/mminit.c:164)           0xECC00000 - 0xF7BE0000System PTE Space
(../ntoskrnl/mm/mminit.c:167)           0xF7BE0000 - 0xFFBE0000Non Paged Pool Expansion PTE Space
(../ntoskrnl/config/cmsysini.c:513) CmpCreateHardwareProfile() done
(../ntoskrnl/config/cmhvlist.c:158) CmpAddToHiveFileList: Creation or opening of the hive list failed, status = c0000034
(../hal/halx86/legacy/bussupp.c:688) Your machine has a PCI-to-PCI or CardBUS Bridge. PCI devices may fail!
(../hal/halx86/legacy/bussupp.c:717) Found parent bus (indicating PCI Bridge). PCI devices may fail!

====== PCI BUS HARDWARE DETECTION =======

00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge [8086:7190] (rev 03)
Subsystem: Unknown [0000:0000]
Flags: bus master, medium devsel, latency 64
Memory at e4000000 (32-bit, prefetchable) [size=64M]

00:01.0 PCI bridge [0604]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge [8086:7191] (rev 03)
Subsystem: Unknown [0000:0000]
Flags: bus master, 66MHz, medium devsel, latency 64
Memory at 40010100 (32-bit, non-prefetchable) [size=256]
Memory at 22a0d0e0 (32-bit, non-prefetchable) [size=4K]
Memory at cfd0ce00 (32-bit, non-prefetchable) [size=512]
Memory at e3f0cff0 (32-bit, non-prefetchable) [size=256]

00:04.0 ISA bridge [0601]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] (rev 02)
Subsystem: Unknown [0000:0000]
Flags: bus master, medium devsel, latency 0

00:04.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01)
Subsystem: Unknown [0000:0000]
Flags: bus master, medium devsel, latency 32
I/O ports at d800 [size=2K]

00:04.2 USB controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB [8086:7112] (rev 01)
Subsystem: Unknown [0000:0000]
Flags: bus master, medium devsel, latency 32, IRQ 09
I/O ports at d400 [size=1K]
Device is using IRQ 9! ISA Cards using that IRQ may fail!
Device is an Intel UHCI (USB) Controller. Turn off Legacy USB in your BIOS!

00:04.3 Secondary bus towards host CPU [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 02)
Subsystem: Unknown [0000:0000]
Flags: medium devsel, latency 0

00:06.0 SCSI storage controller [0100]: Adaptec AHA-2940U2/U2W / 7890/7891 [9005:001f] (rev 00)
Subsystem: 2940U2W SCSI Controller [9005:000f]
Flags: bus master, medium devsel, latency 32, IRQ 09
I/O ports at d000 [size=4K]
Memory at cd800000 (64-bit, non-prefetchable) [size=8M]
Device is using IRQ 9! ISA Cards using that IRQ may fail!

00:0a.0 Mass storage controller [0180]: Promise Technology, Inc. PDC20262 (FastTrak66/Ultra66) [105a:4d38] (rev 01)
Subsystem: Ultra66 [105a:4d33]
Flags: bus master, medium devsel, latency 32, IRQ 05
I/O ports at b800 [size=2K]
I/O ports at b400 [size=1K]
I/O ports at b000 [size=4K]
I/O ports at a800 [size=2K]
I/O ports at a400 [size=1K]
Memory at cd000000 (32-bit, non-prefetchable) [size=16M]
Device is using IRQ 5! ISA Cards using that IRQ may fail!

00:0b.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 43)
Subsystem: DFE-530TX rev A [1186:1400]
Flags: bus master, medium devsel, latency 32, IRQ 10
I/O ports at a000 [size=8K]
Memory at cc800000 (32-bit, non-prefetchable) [size=8M]
Device is using IRQ 10! ISA Cards using that IRQ may fail!

00:0c.0 Multimedia audio controller [0401]: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio Accelerator] [1013:6003] (rev 01)
Subsystem: DMX XFire 1024 [153b:112e]
Flags: bus master, slow devsel, latency 32, IRQ 11
Memory at cc000000 (32-bit, non-prefetchable) [size=64M]
Memory at cb800000 (32-bit, non-prefetchable) [size=8M]
Device is using IRQ 11! ISA Cards using that IRQ may fail!

01:00.0 VGA compatible controller [0300]: NVIDIA Corporation NV34 [GeForce FX 5500] [10de:0326] (rev a1)
Subsystem: Unknown [10b0:0403]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
Memory at ce000000 (32-bit, non-prefetchable) [size=32M]
Memory at d0000000 (32-bit, prefetchable) [size=256M]
Device is using IRQ 11! ISA Cards using that IRQ may fail!

====== PCI BUS DETECTION COMPLETE =======

PC Compatible Eisa/Isa HAL Detected
(../ntoskrnl/io/pnpmgr/pnpinit.c:62) WARNING!! In PiInitCacheGroupInformation, using ReactOS HACK for SETUPLDR!!
(../ntoskrnl/io/pnpmgr/pnpinit.c:455) Need to build DACL
(../ntoskrnl/io/pnpmgr/pnpmgr.c:3212) ZwOpenKey(\Registry\Machine\SYSTEM\CURRENTCONTROLSET\Control\Pnp) failed with status 0xc0000034
(../ntoskrnl/ps/apphelp.c:318) SHIMS: ApphelpCacheRead could not even open Session Manager\AppCompatCache (0xc0000034)
(../ntoskrnl/wmi/wmi.c:72) IoWMIRegistrationControl() called for DO B2690E18, requesting 1 action, returning success
(../sdk/lib/rtl/image.c:171) Invalid base address: 00000000
(../ntoskrnl/io/iomgr/driver.c:1647) '\Driver\sacdrv' initialization failed, status (0xc0000037)
(../ntoskrnl/io/iomgr/driver.c:64) Deleting driver object '\Driver\sacdrv'


ATAPI IDE MiniPort Driver (UniATA) v 0.46d7
 Parameter PrintLogo
 Parameter PrintLogo = 0x0
 Parameter IgnoreIsaCompatiblePci
 Parameter IgnoreIsaCompatiblePci = 0x0
 Parameter IgnoreNativePci
 Parameter IgnoreNativePci = 0x0
UniATA Init: OS should be ReactOS
UniATA Init: OS ver 4.1 (1), 1 CPU(s)
Performance calibration: dt=14995, counter=410487
InitBadBlocks general
InitBadBlocks returned: 0xc0000034
 Parameter SkipRaids
 Parameter SkipRaids = 0x1
 Parameter ForceSimplex
 Parameter ForceSimplex = 0x0
 Parameter LogToDisplay
 Parameter LogToDisplay = 0x0
HwInitializationDataSize = 50
set NeedPhysicalAddresses = TRUE
set AtapiAdapterControl() ptr


UniATA init... (0)
 Parameter VirtualMachineType
 Parameter VirtualMachineType = 0x0
 Parameter VirtualBox
 Parameter VirtualBox = 0x0

ATAPI IDE enum supported PCI BusMaster Devices
UniataEnumBusMasterController__: maxPciBus=16
  pass 0
DevId = 71908086 Class = 0006/0000, SubVen/Sys 0000/0000
DevId = 71918086 Class = 0006/0004, SubVen/Sys 0000/0000
DevId = 71108086 Class = 0006/0001, SubVen/Sys 0000/0000
DevId = 71118086 Class = 0001/0001, SubVen/Sys 0000/0000
-- BusID: 0x0:0x4:0x1
Storage Class
DevId = 71118086 Class = 0001/0001, ProgIf 80
 Parameter Include
 Parameter Include = 0x0
No force include, check exclude
 Parameter Exclude
 Parameter Exclude = 0x0
Default device
found, pass 0
InterruptPin = 0x0
InterruptLine = 0x0
Enabling Mem/Io spaces and busmastering...
Initial pciData.Command = 0x5
PCI_ENABLE_IO_SPACE
PCI_ENABLE_MEMORY_SPACE
New pciData.Command = 0x5
PCI_ENABLE_BUS_MASTER
InterruptLine = 0x0
Final pciData.Command = 0x5
Range 4 = 0xd801
count: BMListLen++
DevId = 71128086 Class = 000C/0003, SubVen/Sys 0000/0000
DevId = 71138086 Class = 0006/0080, SubVen/Sys 0000/0000
DevId = 001F9005 Class = 0001/0000, SubVen/Sys 9005/000f
-- BusID: 0x0:0x6:0x0
Storage Class
DevId = 001F9005 Class = 0001/0000, ProgIf 00
 Parameter Include
 Parameter Include = 0x0
No force include, check exclude
 Parameter Exclude
 Parameter Exclude = 0x0
unknown
Subclass not supported
Subclass not supported
DevId = 4D38105A Class = 0001/0080, SubVen/Sys 105a/4d33
-- BusID: 0x0:0xa:0x0
Storage Class
DevId = 4D38105A Class = 0001/0080, ProgIf 00
 Parameter Include
 Parameter Include = 0x0
No force include, check exclude
 Parameter Exclude
 Parameter Exclude = 0x0
Default device
found, pass 0
InterruptPin = 0x1
InterruptLine = 0x5
Enabling Mem/Io spaces and busmastering...
Initial pciData.Command = 0x7
PCI_ENABLE_IO_SPACE
PCI_ENABLE_MEMORY_SPACE
PCI_ENABLE_BUS_MASTER
InterruptLine = 0x5
Final pciData.Command = 0x7
Range 0 = 0xb801
Range 1 = 0xb401
Range 2 = 0xb001
Range 3 = 0xa801
Range 4 = 0xa401
Range 5 = 0xcd000000
count: BMListLen++
DevId = 30651106 Class = 0002/0000, SubVen/Sys 1186/1400
DevId = 60031013 Class = 0004/0001, SubVen/Sys 153b/112e
DevId = 032610DE Class = 0003/0000, SubVen/Sys 10b0/0403
  pass 1
DevId = 71118086 Class = 0001/0001, SubVen/Sys 0000/0000
-- BusID: 0x0:0x4:0x1
Storage Class
DevId = 71118086 Class = 0001/0001, ProgIf 80
 Parameter Include
 Parameter Include = 0x0
No force include, check exclude
 Parameter Exclude
 Parameter Exclude = 0x0
Default device
found, pass 1
InterruptPin = 0x0
InterruptLine = 0x0
Range 4 = 0xd801
found suitable device
 Parameter NativePCIMode
 Parameter NativePCIMode = 0x0
Add to BMList, AltInit 0
DevId = 4D38105A Class = 0001/0080, SubVen/Sys 105a/4d33
-- BusID: 0x0:0xa:0x0
Storage Class
DevId = 4D38105A Class = 0001/0080, ProgIf 00
 Parameter Include
 Parameter Include = 0x0
No force include, check exclude
 Parameter Exclude
 Parameter Exclude = 0x0
Default device
found, pass 1
InterruptPin = 0x1
InterruptLine = 0x5
Range 0 = 0xb801
Range 1 = 0xb401
Range 2 = 0xb001
Range 3 = 0xa801
Range 4 = 0xa401
Range 5 = 0xcd000000
found suitable device
  pass 2
DevId = 71118086 Class = 0001/0001, SubVen/Sys 0000/0000
-- BusID: 0x0:0x4:0x1
Storage Class
DevId = 71118086 Class = 0001/0001, ProgIf 80
 Parameter Include
 Parameter Include = 0x0
No force include, check exclude
 Parameter Exclude
 Parameter Exclude = 0x0
Default device
found, pass 2
InterruptPin = 0x0
InterruptLine = 0x0
Range 4 = 0xd801
found suitable device
DevId = 4D38105A Class = 0001/0080, SubVen/Sys 105a/4d33
-- BusID: 0x0:0xa:0x0
Storage Class
DevId = 4D38105A Class = 0001/0080, ProgIf 00
 Parameter Include
 Parameter Include = 0x0
No force include, check exclude
 Parameter Exclude
 Parameter Exclude = 0x0
Default device
found, pass 2
InterruptPin = 0x1
InterruptLine = 0x5
Range 0 = 0xb801
Range 1 = 0xb401
Range 2 = 0xb001
Range 3 = 0xa801
Range 4 = 0xa401
Range 5 = 0xcd000000
found suitable device
Add to BMList, AltInit 0
  BMListLen=2
 Parameter WaitBusyCount
 Parameter WaitBusyCount = 0xc8
 Parameter WaitBusyDelay
 Parameter WaitBusyDelay = 0xa
 Parameter WaitDrqDelay
 Parameter WaitDrqDelay = 0xa
 Parameter WaitBusyLongCount
 Parameter WaitBusyLongCount = 0x7d0
 Parameter WaitBusyLongDelay
 Parameter WaitBusyLongDelay = 0xfa
 Parameter AtapiSendDisableIntr
 Parameter AtapiSendDisableIntr = 0x0
 Parameter AtapiDmaRawRead
 Parameter AtapiDmaRawRead = 0x1
 Parameter AtapiNoDma
 Parameter AtapiNoDma = 0x0
 Parameter MaxIsrWait
 Parameter MaxIsrWait = 0x28
 Parameter DriveSelectNanoDelay
 Parameter DriveSelectNanoDelay = 0x0


ATAPI IDE: Look for legacy ISA-bridged PCI IDE controller (onboard)


ATAPI IDE: BMListLen 2
UniataClaimLegacyPCIIDE:
(../hal/halx86/legacy/bussupp.c:1253) Slot assignment for 5 on bus 0
(../hal/halx86/legacy/bus/pcibus.c:727) WARNING: PCI Slot Resource Assignment is FOOBAR
ok 0x0
 Parameter IgnoreIsaCompatiblePci
 Parameter IgnoreIsaCompatiblePci = 0x0
Try init channel 0, method 0
UniataFindBusMasterController: Context=0, BMListLen=2
ConfigInfo->Length 8c
AdapterInterfaceType: Isa
bm_offset 0, channel 0 
AdapterInterfaceType=0x1
IoBusNumber=0x0
slotNumber=0x24
busDataRead
DevId = 71118086 Class = 0001/0001
Storage Class
MasterDev (1)
Check exclude
 Parameter Exclude
 Parameter Exclude = 0x0
UniataChipDetect:
HwFlags: 0x0
 Parameter ForceSimplex
 Parameter ForceSimplex = 0x0
i: 0x34
VendorID/DeviceID/Rev 0x8086/0x7111/0x1
i: 0x2
HwFlags: 0x0
 Parameter HwFlagsOverride
 Parameter HwFlagsOverride = 0x0
HwFlagsOverride: 0x0
 Parameter HwFlagsAdd
 Parameter HwFlagsAdd = 0x0
HwFlagsAdd: 0x0
HwFlags (final): 0x0
MaxTransferMode: 0x42
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x42
MaxTransferMode (overriden): 0x42
UniataChipDetectChannels:
MasterDev -> 1 chan
 Parameter Exclude
 Parameter Exclude = 0x0
PortMask 0x1
 Parameter PortMask
 Parameter PortMask = 0x1
Force PortMask 0x1
mask -> 1 chans
 Parameter NumberChannels
 Parameter NumberChannels = 0x1
reg -> 1 chans
Final PortMask 0x1
allocate 2 Luns for 1 channels
ForceSimplex = 0
HwFlags = 0
 (0)HwFlags = 0
 (1)HwFlags = 0
 (2)found suitable device
HwFlags = 0
 (3)Range 4 = 0xd801
IsBusMaster == TRUE
  AtapiGetIoRange:
  AtapiGetIoRange: rid 0x4, start 0x0, offs 0x0, len 0x8, mem 0x0
  AtapiGetIoRange: (2) 0xd800
  BusMasterAddress (base): 0xd800
AtapiReadChipConfig: devExt 0xb268f2b4
AtapiReadChipConfig: dev 0x0, ph chan -1
 Parameter ForceSimplex
 Parameter ForceSimplex = 0x0
MaxTransferMode (base): 0x42
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x42
MaxTransferMode (overriden): 0x42
 Parameter Force80pin
 Parameter Force80pin = 0x0
 Parameter AtapiDmaZeroTransfer
 Parameter AtapiDmaZeroTransfer = 0x0
 Parameter AtapiDmaControlCmd
 Parameter AtapiDmaControlCmd = 0x0
 Parameter AtapiDmaRawRead
 Parameter AtapiDmaRawRead = 0x1
 Parameter AtapiDmaReadWrite
 Parameter AtapiDmaReadWrite = 0x1
AtapiChipInit: dev 0x0, ph chan -2, c -1
HwFlags: 0x0
VendorID/DeviceID/Rev 0x8086/0x7111/0x1
  re-enable IO resources of MasterDev
Enabling Mem/Io spaces and busmastering...
Initial pciData.Command = 0x5
PCI_ENABLE_IO_SPACE
PCI_ENABLE_MEMORY_SPACE
New pciData.Command = 0x5
PCI_ENABLE_BUS_MASTER
InterruptLine = 0x0
Final pciData.Command = 0x5
AtapiChipInit: dev 0x0, ph chan 0, c 0
HwFlags: 0x0
VendorID/DeviceID/Rev 0x8086/0x7111/0x1
simplexOnly = 0 (2)MasterDev (2)
1 channels & 1 irq for 1 controller
update ConfigInfo->nt4
using AtaReq sz 1000
update ConfigInfo->w2k: 64bit 0
chan[0] InterruptMode: 1, Level 14, Level2 0, Vector 0, Vector2 0
Reconstruct ConfigInfo
BMList[i].channel 0x0, NumberChannels 0x1, channel 0x0
de 0xb268f2b4, Channel 0x0
chan = 0xb268f7f8
AtapiSetupLunPtrs for channel 0 of 1, 2 luns 
  Chan 0xb268f7f8
  Lun 0x0
  Lun ptr 0xb2450008
  Lun 0x1
  Lun ptr 0xb2450320
AtapiReadChipConfig: devExt 0xb268f2b4
AtapiReadChipConfig: dev 0x0, ph chan 0
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x42
MaxTransferMode (overriden): 0x42
 Parameter ReorderEnable
 Parameter ReorderEnable = 0x1
 Parameter Force80pin
 Parameter Force80pin = 0x0
 Parameter ReadCacheEnable
 Parameter ReadCacheEnable = 0x1
 Parameter WriteCacheEnable
 Parameter WriteCacheEnable = 0x1
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x42
 Parameter PreferedTransferMode
 Parameter PreferedTransferMode = 0xffffffff
 Parameter AdvancedPowerMode
 Parameter AdvancedPowerMode = 0x80
 Parameter AcousticMgmt
 Parameter AcousticMgmt = 0x80
 Parameter StandbyTimer
 Parameter StandbyTimer = 0x0
 Parameter ReadOnly
 Parameter ReadOnly = 0x0
 Parameter GeomType
 Parameter GeomType = 0xffffffff
 Parameter Hidden
 Parameter Hidden = 0x0
 Parameter Exclude
 Parameter Exclude = 0x0
 Parameter ReadCacheEnable
 Parameter ReadCacheEnable = 0x1
 Parameter WriteCacheEnable
 Parameter WriteCacheEnable = 0x1
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x42
 Parameter PreferedTransferMode
 Parameter PreferedTransferMode = 0xffffffff
 Parameter AdvancedPowerMode
 Parameter AdvancedPowerMode = 0x80
 Parameter AcousticMgmt
 Parameter AcousticMgmt = 0x80
 Parameter StandbyTimer
 Parameter StandbyTimer = 0x0
 Parameter ReadOnly
 Parameter ReadOnly = 0x0
 Parameter GeomType
 Parameter GeomType = 0xffffffff
 Parameter Hidden
 Parameter Hidden = 0x0
 Parameter Exclude
 Parameter Exclude = 0x0
set AccessRanges
Getting IO ranges
IO range 1 0x1f0
IO range 2 0x3f6
  IO_0x0 (0x1f0), IO:
  IO_0x10 (0x3f6), IO:
  IO_0x12 (0xd800), IO:
  IO_0x17 (0x0), IO:
  AltStatus (0x50)
  Reg_0x1 (0x1f1) = 0x0
  Reg_0x2 (0x1f2) = 0x3
  Reg_0x3 (0x1f3) = 0x1
  Reg_0x4 (0x1f4) = 0x0
  Reg_0x5 (0x1f5) = 0x8
  Reg_0x6 (0x1f6) = 0xa0
  Reg_0x7 (0x1f7) = 0x50
  BM_0x0 (0xd800) = 0x0
  BM_0x1 (0xd801) = 0x0
  BM_0x2 (0xd802) = 0x64
  BM_0x3 (0xd803) = 0x0
clean IDE intr 0
clean IDE intr 1
  DMA status 0x64
  clear unexpected DMA intr
AtapiDmaDone: dev 0
claim Compatible controller
claim Primary
AtapiDmaAlloc: allocate tmp buffers below 4Gb
AtapiVirtToPhysAddr_: b268e008 -> 00000000:04f8d008
AtapiVirtToPhysAddr_: b2430000 -> 00000000:04d2f000
exit: init spinlock
MasterDev=0x1, NumberChannels=0x1, Isr2DevObj=0xb24513b0
Init ISR:
Unnecessary
MasterDev=0x1, NumberChannels=0x1, Isr2DevObj=0xb24513b0
do not tell system, that we know about PCI IO ranges
final chan[1] InterruptMode: 1, Level 14, Level2 0, Vector 0, Vector2 0
return SP_RETURN_FOUND
Attempt 0 of MasterDev ok
(../ntoskrnl/io/iomgr/iorsrce.c:874) IoReportResourceUsage is halfplemented!
AtapiHwInitialize: (base)
  mark chan 0 of master controller [0] as inited
AtapiChipInit: dev 0xffffffff, ph chan -1, c -1
HwFlags: 0x0
VendorID/DeviceID/Rev 0x8086/0x7111/0x1
  re-enable IO resources of MasterDev
Enabling Mem/Io spaces and busmastering...
Initial pciData.Command = 0x5
PCI_ENABLE_IO_SPACE
PCI_ENABLE_MEMORY_SPACE
New pciData.Command = 0x5
PCI_ENABLE_BUS_MASTER
InterruptLine = 0x0
Final pciData.Command = 0x5
AtapiChipInit: dev 0xffffffff, ph chan 0, c 0
HwFlags: 0x0
VendorID/DeviceID/Rev 0x8086/0x7111/0x1
FindDevices:
AtapiDisableInterrupts_0: 0
  max_ldev 2
CheckDevice: Device 0x0
CheckDevice: reset dev
AtapiSoftReset:
  statusByte2 50:
 set DFLAGS_REINIT_DMA
  DMA status 0x4
  clear unexpected DMA intr on ATAPI reset
AtapiDmaDone: dev 0
  ATAPI at home
  ATAPI at home
CheckDevice: status 0x0
CheckDevice: ATAPI signature found
IssueIdentify: Checking for ATAPI. Status (0x0)
IssueIdentify: Checking for ATAPI (2). Status (0x0)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0
IssueIdentify: IDE_STATUS_DRQ (0x58)
IssueIdentify: Status before read words 0x58
IssueIdentify: statusByte 0x58
IssueIdentify: BASE statusByte 0x58
IssueIdentify: iReason 2
IssueIdentify: wCount 200
  use 16bit IO
IssueIdentify: suck data port
IssueIdentify: statusByte 0x50
IssueIdentify: statusByte 0x50
IssueIdentify: Status after read words 0x50
Model: LHD--TTSVD-DAR MHG22
FW:    .120
S/N:                       
Pio:   2
APio:  3
SWDMA: 0
MWDMA: 0
UDMA:  4/1f
SATA:  0
SATA support: 0, CAPs 0x0
OrigTransferMode: 44, Active: 42
Accoustic 0, cur 0
AdvPowerMode 0
PowerMngt 0/0, APM 0/0
InitBadBlocks local
LunExt 0xb2450008
S/N:HL-DT-STDVD-RAM_GH22LP20________________-____________________
IssueIdentify: Device does not interrupt on assertion of DRQ.
IssueIdentify: Device is CD/Optical drive.
IssueIdentify: AtapiCmdSize 0x0
IssueIdentify: final Status on exit (0x50)
CheckDevice: Device 0x0 is ATAPI
CheckDevice: check status: found
CheckDevice: Device 0x1
CheckDevice: reset dev
AtapiSoftReset:
  statusByte2 50:
 set DFLAGS_REINIT_DMA
  DMA status 0x0
  ATAPI at home
  ATAPI at home
CheckDevice: status 0x0
CheckDevice: ATAPI signature found
IssueIdentify: Checking for ATAPI. Status (0x0)
IssueIdentify: Checking for ATAPI (2). Status (0x0)
AtaCommand48: cntrlr 0x0:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0
IssueIdentify: IDE_STATUS_DRQ (0x58)
IssueIdentify: Status before read words 0x58
IssueIdentify: statusByte 0x58
IssueIdentify: BASE statusByte 0x58
IssueIdentify: iReason 2
IssueIdentify: wCount 200
  use 16bit IO
IssueIdentify: suck data port
IssueIdentify: statusByte 0x50
IssueIdentify: statusByte 0x50
IssueIdentify: Status after read words 0x50
Model: DT K    DCWR042184 B
FW:    7Z4S
S/N:                       
Pio:   2
APio:  3
SWDMA: 0
MWDMA: 0
UDMA:  4/7
SATA:  0
SATA support: 0, CAPs 0x0
OrigTransferMode: 42, Active: 42
Accoustic 0, cur 0
AdvPowerMode 0
PowerMngt 0/0, APM 0/0
InitBadBlocks local
LunExt 0xb2450320
S/N:TDK_____CDRW401248B_____________________-____________________
IssueIdentify: Device does not interrupt on assertion of DRQ.
IssueIdentify: Device is CD/Optical drive.
IssueIdentify: AtapiCmdSize 0x0
IssueIdentify: final Status on exit (0x50)
CheckDevice: Device 0x1 is ATAPI
CheckDevice: check status: found
FindDevices: select 0 dev to clear INTR
FindDevices: statusByte=0x50
FindDevices: select 1 dev to clear INTR
FindDevices: statusByte=0x50
FindDevices: select 0 dev on exit
AtapiEnableInterrupts_0: 1
FindDevices: returning 1
AtapiHwInitialize: lChannel 0x0, dev 0
AtapiDisableInterrupts_0: 0
AtapiHwInitialize: ATAPI/Changer branch
  try mode 0x42
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
Intel 0
AtaSetTransferMode: Set 0x42 on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x42 feature 0x3
  0x40 3300/2300, 0x44 0/0
Using 0x42 mode
AtapiEnableInterrupts_0: 1
AtapiHwInitialize: lChannel 0x0, dev 1
AtapiDisableInterrupts_0: 0
AtapiHwInitialize: ATAPI/Changer branch
  try mode 0x42
AtapiDmaInit__: Set (U)DMA on Device 1
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
Intel 0
AtaSetTransferMode: Set 0x42 on Device 0/1
AtaCommand48: cntrlr 0x0:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x42 feature 0x3
  0x40 ff/0, 0x44 f/b
Using 0x42 mode
AtapiEnableInterrupts_0: 1
AtapiHwInitialize: (base) done
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 2
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf7724200, CDB 0xf7724230, AtaReq 0xb267d000, SCmd 0x12
UniataNeedQueueing: TopLevel, qd=0
Send to device 12
TopLevel (2), srb 0xf7724200
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 12
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 12 (Cdb f7724230)
  assume IN
AtapiSendCommand: zero/unaligned transfer 24, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 12
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiDmaReinit: set PIO mode on Device 0 (42 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
Intel 0
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f7724230 Command 0x12 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x24.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f7724200
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x24
IdeIntr: Read 0x12 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf76b0c78, srb->DataBuffer 0xf76b0c78
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf76b0c9c, srb->DataBuffer 0xf76b0c78, len 0x24
   Transfered 24, full size 24
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xf7724200, status 1
AtapiInterrupt: RequestComplete, srb 0xf7724200
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x1:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xf7724200 complete with status 0xa
AtapiStartIo: UniataRemoveRequest(0, f7724200)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf7724200, CDB 0xf7724230, AtaReq 0xb267d000, SCmd 0x12
UniataNeedQueueing: TopLevel, qd=0
Send to device 12
TopLevel (2), srb 0xf7724200
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 12
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 12 (Cdb f7724230)
  assume IN
AtapiSendCommand: zero/unaligned transfer 24, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 12
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiDmaReinit: set PIO mode on Device 1 (42 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
Intel 0
AtaSetTransferMode: Set 0xc on Device 0/1
AtaCommand48: cntrlr 0x0:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0xc feature 0x3
  0x40 ff/0, 0x44 f/b
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f7724230 Command 0x12 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x24.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0xd, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f7724200
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x24
IdeIntr: Read 0x12 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf76b0c78, srb->DataBuffer 0xf76b0c78
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf76b0c9c, srb->DataBuffer 0xf76b0c78, len 0x24
   Transfered 24, full size 24
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xf7724200, status 1
AtapiInterrupt: RequestComplete, srb 0xf7724200
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x1:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xf7724200 complete with status 0xa
AtapiStartIo: UniataRemoveRequest(0, f7724200)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
AtapiStartIo: Communication port
  INQUIRY
AtapiStartIo: Srb 0xf7724200 complete with status 0x1
AtapiStartIo: UniataRemoveRequest(0, f7724200)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x1:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xf7724200 complete with status 0xa
AtapiStartIo: UniataRemoveRequest(0, f7724200)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xf7724200 complete with status 0xa
AtapiStartIo: UniataRemoveRequest(0, f7724200)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
ScsiPortInitialize Status 0x0
 Parameter IgnoreIsaCompatiblePci
 Parameter IgnoreIsaCompatiblePci = 0x0
Try init channel 1, method 0
UniataFindBusMasterController: Context=0, BMListLen=2
ConfigInfo->Length 8c
AdapterInterfaceType: Isa
bm_offset 8, channel 1 
AdapterInterfaceType=0x1
IoBusNumber=0x0
slotNumber=0x24
busDataRead
DevId = 71118086 Class = 0001/0001
Storage Class
MasterDev (1)
Check exclude
 Parameter Exclude
 Parameter Exclude = 0x0
UniataChipDetect:
HwFlags: 0x0
 Parameter ForceSimplex
 Parameter ForceSimplex = 0x0
i: 0x34
VendorID/DeviceID/Rev 0x8086/0x7111/0x1
i: 0x2
HwFlags: 0x0
 Parameter HwFlagsOverride
 Parameter HwFlagsOverride = 0x0
HwFlagsOverride: 0x0
 Parameter HwFlagsAdd
 Parameter HwFlagsAdd = 0x0
HwFlagsAdd: 0x0
HwFlags (final): 0x0
MaxTransferMode: 0x42
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x42
MaxTransferMode (overriden): 0x42
UniataChipDetectChannels:
MasterDev -> 1 chan
 Parameter Exclude
 Parameter Exclude = 0x0
PortMask 0x1
 Parameter PortMask
 Parameter PortMask = 0x1
Force PortMask 0x1
mask -> 1 chans
 Parameter NumberChannels
 Parameter NumberChannels = 0x1
reg -> 1 chans
Final PortMask 0x1
allocate 2 Luns for 1 channels
ForceSimplex = 0
HwFlags = 0
 (0)HwFlags = 0
 (1)HwFlags = 0
 (2)found suitable device
HwFlags = 0
 (3)Range 4 = 0xd801
IsBusMaster == TRUE
  AtapiGetIoRange:
  AtapiGetIoRange: rid 0x4, start 0x0, offs 0x8, len 0x8, mem 0x0
  AtapiGetIoRange: (2) 0xd808
  BusMasterAddress (base): 0xd808
AtapiReadChipConfig: devExt 0xb267c7dc
AtapiReadChipConfig: dev 0x0, ph chan -1
 Parameter ForceSimplex
 Parameter ForceSimplex = 0x0
MaxTransferMode (base): 0x42
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x42
MaxTransferMode (overriden): 0x42
 Parameter Force80pin
 Parameter Force80pin = 0x0
 Parameter AtapiDmaZeroTransfer
 Parameter AtapiDmaZeroTransfer = 0x0
 Parameter AtapiDmaControlCmd
 Parameter AtapiDmaControlCmd = 0x0
 Parameter AtapiDmaRawRead
 Parameter AtapiDmaRawRead = 0x1
 Parameter AtapiDmaReadWrite
 Parameter AtapiDmaReadWrite = 0x1
AtapiChipInit: dev 0x0, ph chan -2, c -1
HwFlags: 0x0
VendorID/DeviceID/Rev 0x8086/0x7111/0x1
  re-enable IO resources of MasterDev
Enabling Mem/Io spaces and busmastering...
Initial pciData.Command = 0x5
PCI_ENABLE_IO_SPACE
PCI_ENABLE_MEMORY_SPACE
New pciData.Command = 0x5
PCI_ENABLE_BUS_MASTER
InterruptLine = 0x0
Final pciData.Command = 0x5
AtapiChipInit: dev 0x0, ph chan 0, c 0
HwFlags: 0x0
VendorID/DeviceID/Rev 0x8086/0x7111/0x1
simplexOnly = 0 (2)MasterDev (2)
1 channels & 1 irq for 1 controller
update ConfigInfo->nt4
using AtaReq sz 1000
update ConfigInfo->w2k: 64bit 0
chan[1] InterruptMode: 1, Level 15, Level2 0, Vector 0, Vector2 0
Reconstruct ConfigInfo
BMList[i].channel 0x1, NumberChannels 0x1, channel 0x1
de 0xb267c7dc, Channel 0x1
chan = 0xb267b008
AtapiSetupLunPtrs for channel 0 of 1, 2 luns 
  Chan 0xb267b008
  Lun 0x0
  Lun ptr 0xb242d008
  Lun 0x1
  Lun ptr 0xb242d320
AtapiReadChipConfig: devExt 0xb267c7dc
AtapiReadChipConfig: dev 0x0, ph chan 1
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x42
MaxTransferMode (overriden): 0x42
 Parameter ReorderEnable
 Parameter ReorderEnable = 0x1
 Parameter Force80pin
 Parameter Force80pin = 0x0
 Parameter ReadCacheEnable
 Parameter ReadCacheEnable = 0x1
 Parameter WriteCacheEnable
 Parameter WriteCacheEnable = 0x1
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x42
 Parameter PreferedTransferMode
 Parameter PreferedTransferMode = 0xffffffff
 Parameter AdvancedPowerMode
 Parameter AdvancedPowerMode = 0x80
 Parameter AcousticMgmt
 Parameter AcousticMgmt = 0x80
 Parameter StandbyTimer
 Parameter StandbyTimer = 0x0
 Parameter ReadOnly
 Parameter ReadOnly = 0x0
 Parameter GeomType
 Parameter GeomType = 0xffffffff
 Parameter Hidden
 Parameter Hidden = 0x0
 Parameter Exclude
 Parameter Exclude = 0x0
 Parameter ReadCacheEnable
 Parameter ReadCacheEnable = 0x1
 Parameter WriteCacheEnable
 Parameter WriteCacheEnable = 0x1
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x42
 Parameter PreferedTransferMode
 Parameter PreferedTransferMode = 0xffffffff
 Parameter AdvancedPowerMode
 Parameter AdvancedPowerMode = 0x80
 Parameter AcousticMgmt
 Parameter AcousticMgmt = 0x80
 Parameter StandbyTimer
 Parameter StandbyTimer = 0x0
 Parameter ReadOnly
 Parameter ReadOnly = 0x0
 Parameter GeomType
 Parameter GeomType = 0xffffffff
 Parameter Hidden
 Parameter Hidden = 0x0
 Parameter Exclude
 Parameter Exclude = 0x0
set AccessRanges
Getting IO ranges
IO range 1 0x170
IO range 2 0x376
  IO_0x0 (0x170), IO:
  IO_0x10 (0x376), IO:
  IO_0x12 (0xd808), IO:
  IO_0x17 (0x0), IO:
  AltStatus (0x50)
  Reg_0x1 (0x171) = 0x0
  Reg_0x2 (0x172) = 0xb
  Reg_0x3 (0x173) = 0x1
  Reg_0x4 (0x174) = 0x0
  Reg_0x5 (0x175) = 0x2
  Reg_0x6 (0x176) = 0xb0
  Reg_0x7 (0x177) = 0x50
  BM_0x0 (0xd808) = 0x0
  BM_0x1 (0xd809) = 0x0
  BM_0x2 (0xd80a) = 0x64
  BM_0x3 (0xd80b) = 0x0
clean IDE intr 0
clean IDE intr 1
  DMA status 0x64
  clear unexpected DMA intr
AtapiDmaDone: dev 0
claim Compatible controller
claim Secondary
AtapiDmaAlloc: allocate tmp buffers below 4Gb
AtapiVirtToPhysAddr_: b267b800 -> 00000000:04f7a800
AtapiVirtToPhysAddr_: b240d000 -> 00000000:04d0c000
exit: init spinlock
MasterDev=0x1, NumberChannels=0x1, Isr2DevObj=0xb24513b0
Init ISR:
Unnecessary
MasterDev=0x1, NumberChannels=0x1, Isr2DevObj=0xb24513b0
do not tell system, that we know about PCI IO ranges
final chan[2] InterruptMode: 1, Level 15, Level2 0, Vector 0, Vector2 0
return SP_RETURN_FOUND
Attempt 0 of MasterDev ok
(../ntoskrnl/io/iomgr/iorsrce.c:874) IoReportResourceUsage is halfplemented!
AtapiHwInitialize: (base)
  mark chan 1 of master controller [0] as inited
AtapiChipInit: dev 0xffffffff, ph chan -1, c -1
HwFlags: 0x0
VendorID/DeviceID/Rev 0x8086/0x7111/0x1
  re-enable IO resources of MasterDev
Enabling Mem/Io spaces and busmastering...
Initial pciData.Command = 0x5
PCI_ENABLE_IO_SPACE
PCI_ENABLE_MEMORY_SPACE
New pciData.Command = 0x5
PCI_ENABLE_BUS_MASTER
InterruptLine = 0x0
Final pciData.Command = 0x5
AtapiChipInit: dev 0xffffffff, ph chan 1, c 0
HwFlags: 0x0
VendorID/DeviceID/Rev 0x8086/0x7111/0x1
FindDevices:
AtapiDisableInterrupts_0: 0
  max_ldev 2
CheckDevice: Device 0x0
CheckDevice: reset dev
AtapiSoftReset:
  statusByte2 50:
 set DFLAGS_REINIT_DMA
  DMA status 0x4
  clear unexpected DMA intr on ATAPI reset
AtapiDmaDone: dev 0
  ATAPI at home
  ATAPI at home
CheckDevice: status 0x0
CheckDevice: ATAPI signature found
IssueIdentify: Checking for ATAPI. Status (0x0)
IssueIdentify: Checking for ATAPI (2). Status (0x0)
AtaCommand48: cntrlr 0x0:0x1 dev 0x0, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0
IssueIdentify: IDE_STATUS_DRQ (0x58)
IssueIdentify: Status before read words 0x58
IssueIdentify: statusByte 0x58
IssueIdentify: BASE statusByte 0x58
IssueIdentify: iReason 2
IssueIdentify: wCount 200
  use 16bit IO
IssueIdentify: suck data port
IssueIdentify: statusByte 0x50
IssueIdentify: statusByte 0x50
IssueIdentify: Status after read words 0x50
Model: eSgata eTS8T00A0    
FW:    .544
S/N:                       
Pio:   2
APio:  3
SWDMA: 4
MWDMA: 4
SATA:  0
SATA support: 0, CAPs 0x0
OrigTransferMode: 22, Active: 22
Accoustic 0, cur 0
AdvPowerMode 0
PowerMngt 0/0, APM 0/0
InitBadBlocks local
LunExt 0xb242d008
S/N:Seagate_STT8000A________________________-________
IssueIdentify: Device does not interrupt on assertion of DRQ.
IssueIdentify: Device is a tape drive.
IssueIdentify: AtapiCmdSize 0x0
IssueIdentify: final Status on exit (0x50)
CheckDevice: Device 0x0 is ATAPI
CheckDevice: check status: found
CheckDevice: Device 0x1
CheckDevice: reset dev
AtapiSoftReset:
  statusByte2 50:
 set DFLAGS_REINIT_DMA
  DMA status 0x0
  ATAPI at home
  ATAPI at home
CheckDevice: status 0x0
CheckDevice: ATAPI signature found
IssueIdentify: Checking for ATAPI. Status (0x0)
IssueIdentify: Checking for ATAPI (2). Status (0x0)
AtaCommand48: cntrlr 0x0:0x1 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0
IssueIdentify: IDE_STATUS_DRQ (0x58)
IssueIdentify: Status before read words 0x58
IssueIdentify: statusByte 0x58
IssueIdentify: BASE statusByte 0x58
IssueIdentify: iReason 2
IssueIdentify: wCount 200
  use 16bit IO
IssueIdentify: suck data port
IssueIdentify: statusByte 0x50
IssueIdentify: statusByte 0x50
IssueIdentify: Status after read words 0x50
Model: SL1-02V RE 5  00    
FW:    5F51
S/N:   29809M0A9056        
Pio:   2
APio:  1
SWDMA: 0
MWDMA: 2
SATA:  0
SATA support: 0, CAPs 0x0
OrigTransferMode: 21, Active: 21
Accoustic 0, cur 0
AdvPowerMode 0
PowerMngt 0/0, APM 0/0
IssueIdentify: Marking drive 1 as removable. SFE = 257
InitBadBlocks local
LunExt 0xb242d320
S/N:LS-120_VER5___00______________UHD_Floppy-9208M9A00965________
IssueIdentify: Device does not interrupt on assertion of DRQ.
IssueIdentify: ATAPI drive type 0x0.
IssueIdentify: AtapiCmdSize 0x0
IssueIdentify: final Status on exit (0x50)
CheckDevice: Device 0x1 is ATAPI
CheckDevice: check status: found
FindDevices: select 0 dev to clear INTR
FindDevices: statusByte=0x50
FindDevices: select 1 dev to clear INTR
FindDevices: statusByte=0x50
FindDevices: select 0 dev on exit
AtapiEnableInterrupts_0: 1
FindDevices: returning 1
AtapiHwInitialize: lChannel 0x0, dev 0
AtapiDisableInterrupts_0: 0
AtapiHwInitialize: ATAPI/Changer branch
  try mode 0x42
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:2:-1
Intel 1
AtaSetTransferMode: Set 0x22 on Device 0/0
AtaCommand48: cntrlr 0x0:0x1 dev 0x0, cmd 0xef, lba 0x0 count 0x22 feature 0x3
  0x40 33000000/23000000, 0x44 0/0
Using 0x22 mode
AtapiEnableInterrupts_0: 1
AtapiHwInitialize: lChannel 0x0, dev 1
AtapiDisableInterrupts_0: 0
AtapiHwInitialize: ATAPI/Changer branch
  try mode 0x42
AtapiDmaInit__: Set (U)DMA on Device 1
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=3:1:-1
Intel 1
AtaSetTransferMode: Set 0x21 on Device 0/1
AtaCommand48: cntrlr 0x0:0x1 dev 0x1, cmd 0xef, lba 0x0 count 0x21 feature 0x3
  0x40 ff0000/0, 0x44 f0/90
Using 0x21 mode
AtapiEnableInterrupts_0: 1
AtapiHwInitialize: (base) done
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 1
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf7724200, CDB 0xf7724230, AtaReq 0xb23fc000, SCmd 0x12
UniataNeedQueueing: TopLevel, qd=0
Send to device 12
TopLevel (2), srb 0xf7724200
TopLevel (3), AtaReq 0xb23fc000
Try ATAPI send 12
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 12 (Cdb f7724230)
  assume IN
AtapiSendCommand: zero/unaligned transfer 24, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 12
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiDmaReinit: set PIO mode on Device 0 (22 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x22
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_WDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
Intel 1
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x0:0x1 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
  0x40 33000000/23000000, 0x44 0/0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f7724230 Command 0x12 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x24.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f7724200
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x24
IdeIntr: Read 0x12 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf76b0c78, srb->DataBuffer 0xf76b0c78
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf76b0c9c, srb->DataBuffer 0xf76b0c78, len 0x24
   Transfered 24, full size 24
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xf7724200, status 1
AtapiInterrupt: RequestComplete, srb 0xf7724200
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x1:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xf7724200 complete with status 0xa
AtapiStartIo: UniataRemoveRequest(0, f7724200)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf7724200, CDB 0xf7724230, AtaReq 0xb23fc000, SCmd 0x12
UniataNeedQueueing: TopLevel, qd=0
Send to device 12
TopLevel (2), srb 0xf7724200
TopLevel (3), AtaReq 0xb23fc000
Try ATAPI send 12
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 12 (Cdb f7724230)
  assume IN
AtapiSendCommand: zero/unaligned transfer 24, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 12
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiDmaReinit: set PIO mode on Device 1 (21 -> b)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x21
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_WDMA   =>   0xffffffff
Setup chip a:w:u=3:-1:-1
Intel 1
AtaSetTransferMode: Set 0xb on Device 0/1
AtaCommand48: cntrlr 0x0:0x1 dev 0x1, cmd 0xef, lba 0x0 count 0xb feature 0x3
  0x40 ff0000/0, 0x44 f0/90
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f7724230 Command 0x12 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x24.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f7724200
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x24
IdeIntr: Read 0x12 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf76b0c78, srb->DataBuffer 0xf76b0c78
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf76b0c9c, srb->DataBuffer 0xf76b0c78, len 0x24
   Transfered 24, full size 24
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xf7724200, status 1
AtapiInterrupt: RequestComplete, srb 0xf7724200
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x1:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xf7724200 complete with status 0xa
AtapiStartIo: UniataRemoveRequest(0, f7724200)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
AtapiStartIo: Communication port
  INQUIRY
AtapiStartIo: Srb 0xf7724200 complete with status 0x1
AtapiStartIo: UniataRemoveRequest(0, f7724200)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x1:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xf7724200 complete with status 0xa
AtapiStartIo: UniataRemoveRequest(0, f7724200)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xf7724200 complete with status 0xa
AtapiStartIo: UniataRemoveRequest(0, f7724200)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
ScsiPortInitialize Status 0x0
Ok, no more retries required
!BMList[i].MasterDev


ATAPI IDE: Look for PCI IDE controller


ATAPI IDE: i 1, BMListLen 2
Try init 105a 4d38 
(../hal/halx86/legacy/bussupp.c:1253) Slot assignment for 5 on bus 0
(../hal/halx86/legacy/bus/pcibus.c:727) WARNING: PCI Slot Resource Assignment is FOOBAR
UniataFindBusMasterController: Context=1, BMListLen=2
ConfigInfo->Length 8c
bm_offset 0, channel 0 
AdapterInterfaceType=0x5
IoBusNumber=0x0
slotNumber=0xa
busDataRead
DevId = 4D38105A Class = 0001/0080
Storage Class
UniataChipDetect:
HwFlags: 0x0
 Parameter ForceSimplex
 Parameter ForceSimplex = 0x0
i: 0x11b
VendorID/DeviceID/Rev 0x105a/0x4d38/0x1
i: 0x1
HwFlags: 0x1
 Parameter HwFlagsOverride
 Parameter HwFlagsOverride = 0x1
HwFlagsOverride: 0x1
 Parameter HwFlagsAdd
 Parameter HwFlagsAdd = 0x0
HwFlagsAdd: 0x0
HwFlags (final): 0x1
MaxTransferMode: 0x44
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x44
MaxTransferMode (overriden): 0x44
UniataChipDetectChannels:
 Parameter Exclude
 Parameter Exclude = 0x0
 Parameter Exclude
 Parameter Exclude = 0x0
PortMask 0x3
 Parameter PortMask
 Parameter PortMask = 0x3
Force PortMask 0x3
mask -> 2 chans
 Parameter NumberChannels
 Parameter NumberChannels = 0x2
reg -> 2 chans
Final PortMask 0x3
allocate 2 Luns for 2 channels
ForceSimplex = 0
HwFlags = 1
 (0)HwFlags = 1
 (1)HwFlags = 1
 (2)found suitable device
HwFlags = 1
 (3)Range 0 = 0xb801
Range 1 = 0xb401
Range 2 = 0xb001
Range 3 = 0xa801
Range 4 = 0xa401
Range 5 = 0xcd000000
IsBusMaster == TRUE
  AtapiGetIoRange:
  AtapiGetIoRange: rid 0x4, start 0xa400, offs 0x0, len 0x10, mem 0x0
  AtapiGetIoRange: (2) 0xa400
  BusMasterAddress (base): 0xa400
IsBusMaster == TRUE && !MasterDev
  BM statusByte = 4
AtapiReadChipConfig: devExt 0xb26782b4
AtapiReadChipConfig: dev 0x1, ph chan -1
 Parameter ForceSimplex
 Parameter ForceSimplex = 0x0
MaxTransferMode (base): 0x44
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x44
MaxTransferMode (overriden): 0x44
 Parameter Force80pin
 Parameter Force80pin = 0x0
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x44
MaxTransferMode (overriden): 0x44
 Parameter Force80pin
 Parameter Force80pin = 0x0
 Parameter AtapiDmaZeroTransfer
 Parameter AtapiDmaZeroTransfer = 0x0
 Parameter AtapiDmaControlCmd
 Parameter AtapiDmaControlCmd = 0x0
 Parameter AtapiDmaRawRead
 Parameter AtapiDmaRawRead = 0x1
 Parameter AtapiDmaReadWrite
 Parameter AtapiDmaReadWrite = 0x1
AtapiChipInit: dev 0x1, ph chan -2, c -1
HwFlags: 0x1
VendorID/DeviceID/Rev 0x105a/0x4d38/0x1
AtapiChipInit: dev 0x1, ph chan 0, c 0
HwFlags: 0x1
VendorID/DeviceID/Rev 0x105a/0x4d38/0x1
AtapiChipInit: dev 0x1, ph chan 1, c 1
HwFlags: 0x1
VendorID/DeviceID/Rev 0x105a/0x4d38/0x1
simplexOnly = 0 (2)!MasterDev
update ConfigInfo->nt4
using AtaReq sz 1000
update ConfigInfo->w2k: 64bit 0
chan[0] InterruptMode: 0, Level 5, Level2 0, Vector 5, Vector2 0
Reconstruct ConfigInfo
set Dma32BitAddresses
BMList[i].channel 0x0, NumberChannels 0x2, channel 0x0
de 0xb26782b4, Channel 0x0
chan = 0xb26788e0
AtapiSetupLunPtrs for channel 0 of 2, 2 luns 
  Chan 0xb26788e0
  Lun 0x0
  Lun ptr 0xb23f9000
  Lun 0x1
  Lun ptr 0xb23f9318
AtapiReadChipConfig: devExt 0xb26782b4
AtapiReadChipConfig: dev 0x1, ph chan 0
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x44
MaxTransferMode (overriden): 0x44
 Parameter ReorderEnable
 Parameter ReorderEnable = 0x1
 Parameter Force80pin
 Parameter Force80pin = 0x0
 Parameter ReadCacheEnable
 Parameter ReadCacheEnable = 0x1
 Parameter WriteCacheEnable
 Parameter WriteCacheEnable = 0x1
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x44
 Parameter PreferedTransferMode
 Parameter PreferedTransferMode = 0xffffffff
 Parameter AdvancedPowerMode
 Parameter AdvancedPowerMode = 0x80
 Parameter AcousticMgmt
 Parameter AcousticMgmt = 0x80
 Parameter StandbyTimer
 Parameter StandbyTimer = 0x0
 Parameter ReadOnly
 Parameter ReadOnly = 0x0
 Parameter GeomType
 Parameter GeomType = 0xffffffff
 Parameter Hidden
 Parameter Hidden = 0x0
 Parameter Exclude
 Parameter Exclude = 0x0
 Parameter ReadCacheEnable
 Parameter ReadCacheEnable = 0x1
 Parameter WriteCacheEnable
 Parameter WriteCacheEnable = 0x1
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x44
 Parameter PreferedTransferMode
 Parameter PreferedTransferMode = 0xffffffff
 Parameter AdvancedPowerMode
 Parameter AdvancedPowerMode = 0x80
 Parameter AcousticMgmt
 Parameter AcousticMgmt = 0x80
 Parameter StandbyTimer
 Parameter StandbyTimer = 0x0
 Parameter ReadOnly
 Parameter ReadOnly = 0x0
 Parameter GeomType
 Parameter GeomType = 0xffffffff
 Parameter Hidden
 Parameter Hidden = 0x0
 Parameter Exclude
 Parameter Exclude = 0x0
Getting IO ranges
!MasterDev mode
IO range 1 0xb800
IO range 2 0xb402
  IO_0x0 (0xb800), IO:
  IO_0x10 (0xb402), IO:
  IO_0x12 (0xa400), IO:
  IO_0x17 (0x0), IO:
  AltStatus (0x50)
  Reg_0x1 (0xb801) = 0x0
  Reg_0x2 (0xb802) = 0x0
  Reg_0x3 (0xb803) = 0x0
  Reg_0x4 (0xb804) = 0x0
  Reg_0x5 (0xb805) = 0x0
  Reg_0x6 (0xb806) = 0xe0
  Reg_0x7 (0xb807) = 0x50
  BM_0x0 (0xa400) = 0x8
  BM_0x1 (0xa401) = 0x0
  BM_0x2 (0xa402) = 0x4
  BM_0x3 (0xa403) = 0x0
clean IDE intr 0
clean IDE intr 1
  DMA status 0x4
  clear unexpected DMA intr
AtapiDmaDone: dev 0
AtapiDmaAlloc: allocate tmp buffers below 4Gb
AtapiVirtToPhysAddr_: b2677008 -> 00000000:04f76008
AtapiVirtToPhysAddr_: b23d9000 -> 00000000:04cd8000
de 0xb26782b4, Channel 0x1
chan = 0xb2678b40
AtapiSetupLunPtrs for channel 1 of 2, 2 luns 
  Chan 0xb2678b40
  Lun 0x0
  Lun ptr 0xb23f9630
  Lun 0x1
  Lun ptr 0xb23f9948
AtapiReadChipConfig: devExt 0xb26782b4
AtapiReadChipConfig: dev 0x1, ph chan 1
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x44
MaxTransferMode (overriden): 0x44
 Parameter ReorderEnable
 Parameter ReorderEnable = 0x1
 Parameter Force80pin
 Parameter Force80pin = 0x0
 Parameter ReadCacheEnable
 Parameter ReadCacheEnable = 0x1
 Parameter WriteCacheEnable
 Parameter WriteCacheEnable = 0x1
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x44
 Parameter PreferedTransferMode
 Parameter PreferedTransferMode = 0xffffffff
 Parameter AdvancedPowerMode
 Parameter AdvancedPowerMode = 0x80
 Parameter AcousticMgmt
 Parameter AcousticMgmt = 0x80
 Parameter StandbyTimer
 Parameter StandbyTimer = 0x0
 Parameter ReadOnly
 Parameter ReadOnly = 0x0
 Parameter GeomType
 Parameter GeomType = 0xffffffff
 Parameter Hidden
 Parameter Hidden = 0x0
 Parameter Exclude
 Parameter Exclude = 0x0
 Parameter ReadCacheEnable
 Parameter ReadCacheEnable = 0x1
 Parameter WriteCacheEnable
 Parameter WriteCacheEnable = 0x1
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x44
 Parameter PreferedTransferMode
 Parameter PreferedTransferMode = 0xffffffff
 Parameter AdvancedPowerMode
 Parameter AdvancedPowerMode = 0x80
 Parameter AcousticMgmt
 Parameter AcousticMgmt = 0x80
 Parameter StandbyTimer
 Parameter StandbyTimer = 0x0
 Parameter ReadOnly
 Parameter ReadOnly = 0x0
 Parameter GeomType
 Parameter GeomType = 0xffffffff
 Parameter Hidden
 Parameter Hidden = 0x0
 Parameter Exclude
 Parameter Exclude = 0x0
Getting IO ranges
!MasterDev mode
IO range 1 0xb000
IO range 2 0xa802
  IO_0x0 (0xb000), IO:
  IO_0x10 (0xa802), IO:
  IO_0x12 (0xa408), IO:
  IO_0x17 (0x0), IO:
  AltStatus (0x0)
  Reg_0x1 (0xb001) = 0x0
  Reg_0x2 (0xb002) = 0x0
  Reg_0x3 (0xb003) = 0x0
  Reg_0x4 (0xb004) = 0x0
  Reg_0x5 (0xb005) = 0x0
  Reg_0x6 (0xb006) = 0x0
  Reg_0x7 (0xb007) = 0x0
  BM_0x0 (0xa408) = 0x8
  BM_0x1 (0xa409) = 0x0
  BM_0x2 (0xa40a) = 0x2
  BM_0x3 (0xa40b) = 0x0
clean IDE intr 0
clean IDE intr 1
  DMA status 0x2
AtapiDmaAlloc: allocate tmp buffers below 4Gb
AtapiVirtToPhysAddr_: b2676008 -> 00000000:04f75008
AtapiVirtToPhysAddr_: b23b9000 -> 00000000:04cb8000
exit: init spinlock
MasterDev=0x0, NumberChannels=0x2, Isr2DevObj=0x0
Init ISR:
Multichannel native mode, go...
Create DO
DO name:  len(38, 38), \Device\uniata1_2ch
HalGetInterruptVector
  OrigAdapterInterfaceType=5
  SystemIoBusNumber=0
  BusInterruptLevel=5
  BusInterruptVector=5
isr2_de 0xb26788a0
isr2_vector 0x35
isr2_irql 0x16
isr2_affinity 0x1
IoConnectInterrupt
MasterDev=0x0, NumberChannels=0x2, Isr2DevObj=0xb26787e8
final chan[2] InterruptMode: 0, Level 5, Level2 0, Vector 5, Vector2 0
return SP_RETURN_FOUND
AtapiHwInitialize: (base)
AtapiChipInit: dev 0xffffffff, ph chan -1, c -1
HwFlags: 0x1
VendorID/DeviceID/Rev 0x105a/0x4d38/0x1
AtapiChipInit: dev 0xffffffff, ph chan 0, c 0
HwFlags: 0x1
VendorID/DeviceID/Rev 0x105a/0x4d38/0x1
FindDevices:
AtapiDisableInterrupts_0: 0
  max_ldev 2
CheckDevice: Device 0x0
CheckDevice: reset dev
AtapiSoftReset:
  statusByte2 50:
 set DFLAGS_REINIT_DMA
  DMA status 0x0
  HDD at home
  HDD at home
CheckDevice: status 0x51
CheckDevice: IDE device check
IssueIdentify: Checking for IDE. Status (0x50)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0
IssueIdentify: IDE_STATUS_DRQ (0x58)
IssueIdentify: Status before read words 0x58
IssueIdentify: statusByte 0x58
IssueIdentify: BASE statusByte 0x58
  use 16bit IO
IssueIdentify: suck data port
IssueIdentify: statusByte 0x50
IssueIdentify: statusByte 0x50
IssueIdentify: Status after read words 0x50
Model: TS830022 A          
FW:    .333
S/N:   K31BK1XP            
Pio:   2
APio:  3
SWDMA: 0
MWDMA: 0
UDMA:  10/3f
SATA:  0
SATA support: 0, CAPs 0x0
OrigTransferMode: 45, Active: 44
Accoustic 128, cur 128
AdvPowerMode 0
PowerMngt 1/1, APM 0/0
PhysLogSectorSize 0x0, 0x0, offset 0x0
NV PM_Sup 0, PM_En 0, En 0, PM ver 0x0 ver 0x0
R-rate 0
WC 1/1, LA 1/1, WB 1/1, RB 1/1, Q 0/0
Protected 1/1 status 0x1, rev 0x0
CHS 0x3fff:0x10:0x3f
NumOfSectors 0xfbfc10
NumberOfCylinders == 0x3fff
cylinders 0x25db5
NumOfSectors 0x950f8b0
SupportLba flag 0x1
SupportDMA flag 0x1
SoftReset 0x0
SupportIordy 0x1, DisableIordy 0x1
MajorRevision 0x7e
UserAddressableSectors 0x950f8b0
LBA mode
requested LunExt->GeomType=ffffffff
tmp_cylinders = 0x25db5
Use GEOM_STD, CHS=2601/ff/3f
Geometry: C 0x2601 (0x2601)
Geometry: H 0xff (0xff)
Geometry: S 0x3f (0x3f)
InitBadBlocks local
LunExt 0xb23f9000
S/N:ST380022A_______________________________-3KB11KPX____________
IssueIdentify: Device does not interrupt on assertion of DRQ.
IssueIdentify: hard drive.
IssueIdentify: final Status on exit (0x50)
CheckDevice: Device 0x0 is IDE
CheckDevice: check status: found
CheckDevice: Device 0x1
CheckDevice: reset dev
AtapiSoftReset:
  statusByte2 50:
 set DFLAGS_REINIT_DMA
  DMA status 0x0
  HDD at home
  HDD at home
CheckDevice: status 0x0
CheckDevice: IDE device check
IssueIdentify: Checking for IDE. Status (0x0)
IssueIdentify: statusByte != IDE_STATUS_IDLE
IssueIdentify: no dev (dev 1)
CheckDevice: try ATAPI 0x1, status 0x0
IssueIdentify: Checking for ATAPI. Status (0x0)
IssueIdentify: Checking for ATAPI (2). Status (0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
IssueIdentify: 0-status, not present
CheckDevice: Device 0x1 not responding
CheckDevice: check status: not found
FindDevices: select 0 dev to clear INTR
FindDevices: statusByte=0x50
FindDevices: select 1 dev to clear INTR
FindDevices: statusByte=0x0
FindDevices: select 0 dev on exit
AtapiEnableInterrupts_0: 1
FindDevices: returning 1
AtapiHwInitialize: lChannel 0x0, dev 0
AtapiDisableInterrupts_0: 0
AtapiHwInitialize: IDE branch
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0
AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16
  Try Enable Read Cache
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa
  Try Enable Write Cache
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2
  Try Enable Acoustic Mgmt
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42
  try mode 0x44
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x44
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x4
Setup chip a:w:u=4:2:4
AtaSetTransferMode: Set 0x44 on Device 0/0
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x44 feature 0x3
Using 0x44 mode
AtapiEnableInterrupts_0: 1
AtapiHwInitialize: lChannel 0x0, dev 1
AtapiChipInit: dev 0xffffffff, ph chan 1, c 1
HwFlags: 0x1
VendorID/DeviceID/Rev 0x105a/0x4d38/0x1
FindDevices:
AtapiDisableInterrupts_1: 0
  max_ldev 2
CheckDevice: Device 0x0
CheckDevice: reset dev
AtapiSoftReset:
  statusByte2 0:
 set DFLAGS_REINIT_DMA
  DMA status 0x2
  nobody home! 0x0 != 0x55
CheckDevice: Device 0x1
CheckDevice: reset dev
AtapiSoftReset:
  statusByte2 0:
 set DFLAGS_REINIT_DMA
  DMA status 0x2
  nobody home! 0x0 != 0x55
AtapiEnableInterrupts_1: 1
FindDevices: returning 0
AtapiHwInitialize: lChannel 0x1, dev 0
AtapiHwInitialize: lChannel 0x1, dev 1
AtapiHwInitialize: (base) done
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xf7724200, CDB 0xf7724230, AtaReq 0xb23a8000, SCmd 0x12
UniataNeedQueueing: TopLevel, qd=0
Send to device 12
TopLevel (2), srb 0xf7724200
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7723ee8
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_INQUIRY PATH:LUN:TID = 0x0:0x0:0x0
IdeSendCommand: SCSIOP_INQUIRY ok
  HDD at home
RelativeAddressing
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xf7724200 complete with status 0x1
AtapiStartIo: AtapiDmaDBSync(b26788e0, f7724200)
AtapiStartIo: UniataRemoveRequest(b26788e0, f7724200)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26788e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x1:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xf7724200 complete with status 0xa
AtapiStartIo: UniataRemoveRequest(0, f7724200)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x4d38105a/0x1
UniataNeedQueueing: TopLevel, qd=0
Send to device 12
TopLevel (2), srb 0xf7724200
TopLevel (3), AtaReq 0xb23a8000
  HDD at home
CheckDevice: Device 0x1
CheckDevice: reset dev
AtapiSoftReset:
  statusByte2 0:
 set DFLAGS_REINIT_DMA
  DMA status 0x0
  HDD at home
  HDD at home
CheckDevice: status 0x0
CheckDevice: IDE device check
IssueIdentify: Checking for IDE. Status (0x0)
IssueIdentify: statusByte != IDE_STATUS_IDLE
IssueIdentify: no dev (dev 1)
CheckDevice: try ATAPI 0x1, status 0x0
IssueIdentify: Checking for ATAPI. Status (0x0)
IssueIdentify: Checking for ATAPI (2). Status (0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
IssueIdentify: 0-status, not present
CheckDevice: Device 0x1 not responding
CheckDevice: check status: not found
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xf7724200 complete with status 0xa
AtapiStartIo: AtapiDmaDBSync(b26788e0, f7724200)
AtapiStartIo: UniataRemoveRequest(b26788e0, f7724200)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26788e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
UniataNeedQueueing: TopLevel, qd=0
Send to device 12
TopLevel (2), srb 0xf7724200
TopLevel (3), AtaReq 0xb23a8000
  nobody home! 0x0 != 0x55
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xf7724200 complete with status 0xa
AtapiStartIo: AtapiDmaDBSync(b2678b40, f7724200)
AtapiStartIo: UniataRemoveRequest(b2678b40, f7724200)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b2678b40, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1
   DeviceID+VendorID/Rev 0x4d38105a/0x1
UniataNeedQueueing: TopLevel, qd=0
Send to device 12
TopLevel (2), srb 0xf7724200
TopLevel (3), AtaReq 0xb23a8000
  nobody home! 0x0 != 0x55
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xf7724200 complete with status 0xa
AtapiStartIo: AtapiDmaDBSync(b2678b40, f7724200)
AtapiStartIo: UniataRemoveRequest(b2678b40, f7724200)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b2678b40, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
AtapiStartIo: Communication port
  INQUIRY
AtapiStartIo: Srb 0xf7724200 complete with status 0x1
AtapiStartIo: UniataRemoveRequest(0, f7724200)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x1:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xf7724200 complete with status 0xa
AtapiStartIo: UniataRemoveRequest(0, f7724200)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x0:0x1
   DeviceID+VendorID/Rev 0x4d38105a/0x1
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xf7724200 complete with status 0xa
AtapiStartIo: UniataRemoveRequest(0, f7724200)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
ScsiPortInitialize Status 0x0
 Parameter IgnoreIsa
 Parameter IgnoreIsa = 0x0


ATAPI IDE: Look for ISA Controllers
AtapiFindIsaController (ISA):
  assume max PIO4
allocate 2 Luns for 1 channels
AtapiSetupLunPtrs for channel 0 of 1, 2 luns 
  Chan 0xb23a7b40
  Lun 0x0
  Lun ptr 0xb2673008
  Lun 0x1
  Lun ptr 0xb2673320
AtapiReadChipConfig: devExt 0xb23a72b4
AtapiReadChipConfig: dev 0xffffffff, ph chan -1
 Parameter ForceSimplex
 Parameter ForceSimplex = 0x0
MaxTransferMode (base): 0xc
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0xc
MaxTransferMode (overriden): 0xc
 Parameter Force80pin
 Parameter Force80pin = 0x0
 Parameter AtapiDmaZeroTransfer
 Parameter AtapiDmaZeroTransfer = 0x0
 Parameter AtapiDmaControlCmd
 Parameter AtapiDmaControlCmd = 0x0
 Parameter AtapiDmaRawRead
 Parameter AtapiDmaRawRead = 0x1
 Parameter AtapiDmaReadWrite
 Parameter AtapiDmaReadWrite = 0x1
AtapiChipInit: dev 0xffffffff, ph chan -1, c -1
HwFlags: 0x0
VendorID/DeviceID/Rev 0x0/0x0/0x0
AtapiFindIsaController: adapterCount=0
portBase[0]=1f0
 Parameter PortBase
 Parameter PortBase = 0x1f0
 Parameter Irq
 Parameter Irq = 0x0
AtapiCheckIOInterference: AtdiskPrimaryClaimed
AtapiFindIsaController: !ioSpace
AtapiFindIsaController: adapterCount=1
portBase[1]=170
 Parameter PortBase
 Parameter PortBase = 0x170
 Parameter Irq
 Parameter Irq = 0x0
AtapiCheckIOInterference: AtdiskSecondaryClaimed
AtapiFindIsaController: !ioSpace
AtapiFindIsaController: adapterCount=2
portBase[2]=1e8
 Parameter PortBase
 Parameter PortBase = 0x1e8
 Parameter Irq
 Parameter Irq = 0x0
  BaseIoAddress1=1e8
  BaseIoAddress2=3ee
  expected InterruptLevel=b
  AltStatus (0xff)
  Reg_0x1 (0x1e9) = 0xff
  Reg_0x2 (0x1ea) = 0xff
  Reg_0x3 (0x1eb) = 0xff
  Reg_0x4 (0x1ec) = 0xff
  Reg_0x5 (0x1ed) = 0xff
  Reg_0x6 (0x1ee) = 0xff
  Reg_0x7 (0x1ef) = 0xff
AtapiFindIsaController: Identifier read back from Master (0xff)
AtapiFindIsaController: Identifier read back from Slave (0xff)
AtapiFindIsaController: cleanup AccessRanges 0
AtapiFindIsaController: cleanup AccessRanges 1
AtapiFindIsaController: adapterCount=3
portBase=1e8
 Parameter PortBase
 Parameter PortBase = 0x1e8
 Parameter Irq
 Parameter Irq = 0x0
  BaseIoAddress1=1e8
  BaseIoAddress2=3ee
  expected InterruptLevel=a
  AltStatus (0xff)
  Reg_0x1 (0x1e9) = 0xff
  Reg_0x2 (0x1ea) = 0xff
  Reg_0x3 (0x1eb) = 0xff
  Reg_0x4 (0x1ec) = 0xff
  Reg_0x5 (0x1ed) = 0xff
  Reg_0x6 (0x1ee) = 0xff
  Reg_0x7 (0x1ef) = 0xff
AtapiFindIsaController: Identifier read back from Master (0xff)
AtapiFindIsaController: Identifier read back from Slave (0xff)
AtapiFindIsaController: cleanup AccessRanges 0
AtapiFindIsaController: cleanup AccessRanges 1
AtapiFindIsaController: return SP_RETURN_NOT_FOUND
ScsiPortInitialize Status 0xc00000c0
 Parameter IgnoreMca
 Parameter IgnoreMca = 0x0


ATAPI IDE: Look for MCA Controllers
ScsiPortInitialize Status 0xc00000c0


Leave UNIATA MiniPort DriverEntry with status 0x0
(../ntoskrnl/io/iomgr/driver.c:1647) '\Driver\buslogic' initialization failed, status (0xc00000c0)
(../ntoskrnl/io/iomgr/driver.c:64) Deleting driver object '\Driver\buslogic'
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf77245d0, CDB 0xf7724600, AtaReq 0xb267d000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf77245d0
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 25
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f7724600)
  assume IN
AtapiSendCommand: zero/unaligned transfer 8, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 25
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f7724600 Command 0x25 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x8.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f77245d0
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x51
  base status 0x51
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x51)
AtapiInterrupt: iReason 3
AtapiInterrupt: Error 0x60
  Bad Lba 0x0
  wait 10 ready after ATAPI error
  Intr on DRQ 0
AtapiInterrupt: ATAPI Error, int reason 3
Errors in PIO mode
AtapiInterrupt: Error
AtapiInterrupt: CompleteRequest, srbstatus 4
AtapiInterrupt: Error. Begin mapping...
MapError: Error register is 0x60
ATAPI: Unit attention
AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xf77245d0, status 4
AtapiInterrupt: RequestComplete, srb 0xf77245d0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb267b4f0, CDB 0xb267b520, AtaReq 0xb267d000, SCmd 0x3
UniataNeedQueueing: TopLevel, qd=0
Send to device 3
TopLevel (2), srb 0xb267b4f0
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 3
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b267b520)
  assume IN
AtapiSendCommand: SCSIOP_REQUEST_SENSE, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 3
AtapiSendCommand: SCSIOP_REQUEST_SENSE -> no dma setup (2)
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b267b520 Command 0x3 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x51
  continue with SCSIOP_REQUEST_SENSE
AtapiSendCommand: Entry Status (0x51)
AtapiSendCommand: F:0x0, CntHL:0x0:0x12.
AtapiSendCommand: Poll for int. to send packet. Status (0x51)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b267b4f0
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x12
IdeIntr: Read 0x9 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf76afc80, srb->DataBuffer 0xf76afc80
70 00 06 00 00 00 00 0a 00 00 00 00 29 00 00 00 
00 00 
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf76afc92, srb->DataBuffer 0xf76afc80, len 0x12
   Transfered 12, full size 12
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xb267b4f0, status 1
AtapiInterrupt: RequestComplete, srb 0xb267b4f0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf77245d0, CDB 0xf7724600, AtaReq 0xb267d000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf77245d0
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 25
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f7724600)
  assume IN
AtapiSendCommand: zero/unaligned transfer 8, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 25
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f7724600 Command 0x25 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x8.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f77245d0
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x8
IdeIntr: Read 0x4 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf76b01e8, srb->DataBuffer 0xf76b01e8
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf76b01f0, srb->DataBuffer 0xf76b01e8, len 0x8
   Transfered 8, full size 8
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xf77245d0, status 1
AtapiInterrupt: RequestComplete, srb 0xf77245d0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf77245d4, CDB 0xf7724604, AtaReq 0xb267d000, SCmd 0xbd
UniataNeedQueueing: TopLevel, qd=0
Send to device bd
TopLevel (2), srb 0xf77245d4
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send bd
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f7724604)
  assume IN
AtapiSendCommand: zero/unaligned transfer 8, no DMA setup
AtapiSendCommand: use_dma=0, Cmd bd
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f7724604 Command 0xbd to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x8.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f77245d4
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x8
IdeIntr: Read 0x4 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf76b01e8, srb->DataBuffer 0xf76b01e8
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: SCSIOP_MECHANISM_STATUS status 0x1
  set DFLAGS_CHANGER_INITED
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf76b01f0, srb->DataBuffer 0xf76b01e8, len 0x8
   Transfered 8, full size 8
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xf77245d4, status 1
AtapiInterrupt: RequestComplete, srb 0xf77245d4
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf772465c, CDB 0xf772468c, AtaReq 0xb267d000, SCmd 0x1a
UniataNeedQueueing: TopLevel, qd=0
Send to device 1a
TopLevel (2), srb 0xf772465c
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 1a
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f772468c)
  assume IN
AtapiSendCommand: zero/unaligned transfer 14, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 1a
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f772468c Command 0x1a to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x14.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f772465c
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x51
  base status 0x51
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x51)
AtapiInterrupt: iReason 3
AtapiInterrupt: Error 0x50
  Bad Lba 0x0
  wait 10 ready after ATAPI error
  Intr on DRQ 0
AtapiInterrupt: ATAPI Error, int reason 3
Errors in PIO mode
AtapiInterrupt: Error
AtapiInterrupt: CompleteRequest, srbstatus 4
AtapiInterrupt: Error. Begin mapping...
MapError: Error register is 0x50
ATAPI: Illegal request
AtapiInterrupt: Check for underflow, AtaReq->WordsLeft a
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xf772465c, status 4
AtapiInterrupt: RequestComplete, srb 0xf772465c
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb267b4f0, CDB 0xb267b520, AtaReq 0xb267d000, SCmd 0x3
UniataNeedQueueing: TopLevel, qd=0
Send to device 3
TopLevel (2), srb 0xb267b4f0
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 3
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b267b520)
  assume IN
AtapiSendCommand: SCSIOP_REQUEST_SENSE, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 3
AtapiSendCommand: SCSIOP_REQUEST_SENSE -> no dma setup (2)
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b267b520 Command 0x3 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x51
  continue with SCSIOP_REQUEST_SENSE
AtapiSendCommand: Entry Status (0x51)
AtapiSendCommand: F:0x0, CntHL:0x0:0x12.
AtapiSendCommand: Poll for int. to send packet. Status (0x51)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b267b4f0
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x12
IdeIntr: Read 0x9 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf76af820, srb->DataBuffer 0xf76af820
70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00 
00 00 
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf76af832, srb->DataBuffer 0xf76af820, len 0x12
   Transfered 12, full size 12
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xb267b4f0, status 1
AtapiInterrupt: RequestComplete, srb 0xb267b4f0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf772465c, CDB 0xf772468c, AtaReq 0xb267d000, SCmd 0x5a
UniataNeedQueueing: TopLevel, qd=0
Send to device 5a
TopLevel (2), srb 0xf772465c
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 5a
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f772468c)
  assume IN
AtapiSendCommand: zero/unaligned transfer 18, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 5a
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f772468c Command 0x5a to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x18.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f772465c
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x14
AtapiInterrupt: 12 words requested; 10 words xferred
IdeIntr: Read 0xa words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf76b0c80, srb->DataBuffer 0xf76b0c80
  status re-check 0x50
AtapiInterrupt: early complete + underrun ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
WordsLeft 0x2 -> SRB_STATUS_DATA_OVERRUN
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf76b0c94, srb->DataBuffer 0xf76b0c80, len 0x18
AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 2
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xf772465c, status 12
AtapiInterrupt: RequestComplete, srb 0xf772465c
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf772465c, CDB 0xf772468c, AtaReq 0xb267d000, SCmd 0xbe
UniataNeedQueueing: TopLevel, qd=0
Send to device be
TopLevel (2), srb 0xf772465c
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send be
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD be (Cdb f772468c)
  assume 0-transfer
AtapiSendCommand: zero/unaligned transfer 0, no DMA setup
AtapiSendCommand: use_dma=0, Cmd be
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f772468c Command 0xbe to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f772465c
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: wordCount 0x0, WordsTransfered 0x0
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0x0, srb->DataBuffer 0x0, len 0x0
   Transfered 0, full size 0
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xf772465c, status 1
AtapiInterrupt: RequestComplete, srb 0xf772465c
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf77245d0, CDB 0xf7724600, AtaReq 0xb267d000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf77245d0
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 25
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f7724600)
  assume IN
AtapiSendCommand: zero/unaligned transfer 8, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 25
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f7724600 Command 0x25 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x8.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f77245d0
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x51
  base status 0x51
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x51)
AtapiInterrupt: iReason 3
AtapiInterrupt: Error 0x60
  Bad Lba 0x0
  wait 10 ready after ATAPI error
  Intr on DRQ 0
AtapiInterrupt: ATAPI Error, int reason 3
Errors in PIO mode
AtapiInterrupt: Error
AtapiInterrupt: CompleteRequest, srbstatus 4
AtapiInterrupt: Error. Begin mapping...
MapError: Error register is 0x60
ATAPI: Unit attention
AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xf77245d0, status 4
AtapiInterrupt: RequestComplete, srb 0xf77245d0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb268e898, CDB 0xb268e8c8, AtaReq 0xb267d000, SCmd 0x3
UniataNeedQueueing: TopLevel, qd=0
Send to device 3
TopLevel (2), srb 0xb268e898
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 3
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b268e8c8)
  assume IN
AtapiSendCommand: SCSIOP_REQUEST_SENSE, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 3
AtapiSendCommand: SCSIOP_REQUEST_SENSE -> no dma setup (2)
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b268e8c8 Command 0x3 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x51
  continue with SCSIOP_REQUEST_SENSE
AtapiSendCommand: Entry Status (0x51)
AtapiSendCommand: F:0x0, CntHL:0x0:0x12.
AtapiSendCommand: Poll for int. to send packet. Status (0x51)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b268e898
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x12
IdeIntr: Read 0x9 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf76af8e8, srb->DataBuffer 0xf76af8e8
70 00 06 00 00 00 00 0a 00 00 00 00 29 00 00 00 
00 00 
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf76af8fa, srb->DataBuffer 0xf76af8e8, len 0x12
   Transfered 12, full size 12
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xb268e898, status 1
AtapiInterrupt: RequestComplete, srb 0xb268e898
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf77245d0, CDB 0xf7724600, AtaReq 0xb267d000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf77245d0
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 25
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f7724600)
  assume IN
AtapiSendCommand: zero/unaligned transfer 8, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 25
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f7724600 Command 0x25 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x8.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f77245d0
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x51
  base status 0x51
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x51)
AtapiInterrupt: iReason 3
AtapiInterrupt: Error 0x20
  Bad Lba 0x0
  wait 10 ready after ATAPI error
  Intr on DRQ 0
AtapiInterrupt: ATAPI Error, int reason 3
Errors in PIO mode
AtapiInterrupt: Error
AtapiInterrupt: CompleteRequest, srbstatus 4
AtapiInterrupt: Error. Begin mapping...
MapError: Error register is 0x20
ATAPI: Device not ready
AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xf77245d0, status 4
AtapiInterrupt: RequestComplete, srb 0xf77245d0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb268e898, CDB 0xb268e8c8, AtaReq 0xb267d000, SCmd 0x3
UniataNeedQueueing: TopLevel, qd=0
Send to device 3
TopLevel (2), srb 0xb268e898
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 3
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b268e8c8)
  assume IN
AtapiSendCommand: SCSIOP_REQUEST_SENSE, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 3
AtapiSendCommand: SCSIOP_REQUEST_SENSE -> no dma setup (2)
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b268e8c8 Command 0x3 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x51
  continue with SCSIOP_REQUEST_SENSE
AtapiSendCommand: Entry Status (0x51)
AtapiSendCommand: F:0x0, CntHL:0x0:0x12.
AtapiSendCommand: Poll for int. to send packet. Status (0x51)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b268e898
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x12
IdeIntr: Read 0x9 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf76af8e8, srb->DataBuffer 0xf76af8e8
70 00 02 00 00 00 00 0a 00 00 00 00 3a 00 00 00 
00 00 
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf76af8fa, srb->DataBuffer 0xf76af8e8, len 0x12
   Transfered 12, full size 12
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xb268e898, status 1
AtapiInterrupt: RequestComplete, srb 0xb268e898
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf77245d4, CDB 0xf7724604, AtaReq 0xb267d000, SCmd 0xbd
UniataNeedQueueing: TopLevel, qd=0
Send to device bd
TopLevel (2), srb 0xf77245d4
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send bd
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f7724604)
  assume IN
AtapiSendCommand: zero/unaligned transfer 8, no DMA setup
AtapiSendCommand: use_dma=0, Cmd bd
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f7724604 Command 0xbd to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x8.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f77245d4
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x8
IdeIntr: Read 0x4 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf76b01e8, srb->DataBuffer 0xf76b01e8
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: SCSIOP_MECHANISM_STATUS status 0x1
  set DFLAGS_CHANGER_INITED
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf76b01f0, srb->DataBuffer 0xf76b01e8, len 0x8
   Transfered 8, full size 8
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xf77245d4, status 1
AtapiInterrupt: RequestComplete, srb 0xf77245d4
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf772465c, CDB 0xf772468c, AtaReq 0xb267d000, SCmd 0x1a
UniataNeedQueueing: TopLevel, qd=0
Send to device 1a
TopLevel (2), srb 0xf772465c
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 1a
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f772468c)
  assume IN
AtapiSendCommand: zero/unaligned transfer 14, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 1a
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f772468c Command 0x1a to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x14.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f772465c
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x51
  base status 0x51
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x51)
AtapiInterrupt: iReason 3
AtapiInterrupt: Error 0x20
  Bad Lba 0x0
  wait 10 ready after ATAPI error
  Intr on DRQ 0
AtapiInterrupt: ATAPI Error, int reason 3
Errors in PIO mode
AtapiInterrupt: Error
AtapiInterrupt: CompleteRequest, srbstatus 4
AtapiInterrupt: Error. Begin mapping...
MapError: Error register is 0x20
ATAPI: Device not ready
AtapiInterrupt: Check for underflow, AtaReq->WordsLeft a
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xf772465c, status 4
AtapiInterrupt: RequestComplete, srb 0xf772465c
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb268e898, CDB 0xb268e8c8, AtaReq 0xb267d000, SCmd 0x3
UniataNeedQueueing: TopLevel, qd=0
Send to device 3
TopLevel (2), srb 0xb268e898
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 3
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b268e8c8)
  assume IN
AtapiSendCommand: SCSIOP_REQUEST_SENSE, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 3
AtapiSendCommand: SCSIOP_REQUEST_SENSE -> no dma setup (2)
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b268e8c8 Command 0x3 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x51
  continue with SCSIOP_REQUEST_SENSE
AtapiSendCommand: Entry Status (0x51)
AtapiSendCommand: F:0x0, CntHL:0x0:0x12.
AtapiSendCommand: Poll for int. to send packet. Status (0x51)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b268e898
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x12
IdeIntr: Read 0x9 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf76af830, srb->DataBuffer 0xf76af830
70 00 02 00 00 00 00 0a 00 00 00 00 3a 00 00 00 
00 00 
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf76af842, srb->DataBuffer 0xf76af830, len 0x12
   Transfered 12, full size 12
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xb268e898, status 1
AtapiInterrupt: RequestComplete, srb 0xb268e898
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf772465c, CDB 0xf772468c, AtaReq 0xb267d000, SCmd 0x5a
UniataNeedQueueing: TopLevel, qd=0
Send to device 5a
TopLevel (2), srb 0xf772465c
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 5a
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f772468c)
  assume IN
AtapiSendCommand: zero/unaligned transfer 18, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 5a
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f772468c Command 0x5a to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x18.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f772465c
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x14
AtapiInterrupt: 12 words requested; 10 words xferred
IdeIntr: Read 0xa words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf76b08e8, srb->DataBuffer 0xf76b08e8
  status re-check 0x50
AtapiInterrupt: early complete + underrun ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
WordsLeft 0x2 -> SRB_STATUS_DATA_OVERRUN
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf76b08fc, srb->DataBuffer 0xf76b08e8, len 0x18
AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 2
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xf772465c, status 12
AtapiInterrupt: RequestComplete, srb 0xf772465c
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf772465c, CDB 0xf772468c, AtaReq 0xb267d000, SCmd 0xbe
UniataNeedQueueing: TopLevel, qd=0
Send to device be
TopLevel (2), srb 0xf772465c
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send be
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD be (Cdb f772468c)
  assume 0-transfer
AtapiSendCommand: zero/unaligned transfer 0, no DMA setup
AtapiSendCommand: use_dma=0, Cmd be
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f772468c Command 0xbe to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f772465c
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x51
  base status 0x51
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x51)
AtapiInterrupt: iReason 3
AtapiInterrupt: Error 0x20
  Bad Lba 0x0
  wait 10 ready after ATAPI error
  Intr on DRQ 0
AtapiInterrupt: ATAPI Error, int reason 3
Errors in PIO mode
AtapiInterrupt: Error
AtapiInterrupt: CompleteRequest, srbstatus 4
AtapiInterrupt: Error. Begin mapping...
MapError: Error register is 0x20
ATAPI: Device not ready
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xf772465c, status 4
AtapiInterrupt: RequestComplete, srb 0xf772465c
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb268e898, CDB 0xb268e8c8, AtaReq 0xb267d000, SCmd 0x3
UniataNeedQueueing: TopLevel, qd=0
Send to device 3
TopLevel (2), srb 0xb268e898
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 3
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b268e8c8)
  assume IN
AtapiSendCommand: SCSIOP_REQUEST_SENSE, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 3
AtapiSendCommand: SCSIOP_REQUEST_SENSE -> no dma setup (2)
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b268e8c8 Command 0x3 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x51
  continue with SCSIOP_REQUEST_SENSE
AtapiSendCommand: Entry Status (0x51)
AtapiSendCommand: F:0x0, CntHL:0x0:0x12.
AtapiSendCommand: Poll for int. to send packet. Status (0x51)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b268e898
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x12
IdeIntr: Read 0x9 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf76b0830, srb->DataBuffer 0xf76b0830
70 00 02 00 00 00 00 0a 00 00 00 00 3a 00 00 00 
00 00 
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf76b0842, srb->DataBuffer 0xf76b0830, len 0x12
   Transfered 12, full size 12
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xb268e898, status 1
AtapiInterrupt: RequestComplete, srb 0xb268e898
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf772450c, CDB 0xf772453c, AtaReq 0xb23fc000, SCmd 0x1a
UniataNeedQueueing: TopLevel, qd=0
Send to device 1a
TopLevel (2), srb 0xf772450c
TopLevel (3), AtaReq 0xb23fc000
Try ATAPI send 1a
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f772453c)
  assume IN
AtapiSendCommand: try DMA setup
AtapiSendCommand: use_dma=0, Cmd 1a
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f772453c Command 0x1a to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0xc0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f772450c
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x51
  base status 0x51
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x51)
AtapiInterrupt: iReason 3
AtapiInterrupt: Error 0x64
  Bad Lba 0x0
  wait 10 ready after ATAPI error
  Intr on DRQ 0
AtapiInterrupt: ATAPI Error, int reason 3
Errors in PIO mode
AtapiInterrupt: Error
AtapiInterrupt: CompleteRequest, srbstatus 4
AtapiInterrupt: Error. Begin mapping...
MapError: Error register is 0x64
ATAPI: Unit attention
AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 60
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xf772450c, status 4
AtapiInterrupt: RequestComplete, srb 0xf772450c
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb26732f8, CDB 0xb2673328, AtaReq 0xb23fc000, SCmd 0x3
UniataNeedQueueing: TopLevel, qd=0
Send to device 3
TopLevel (2), srb 0xb26732f8
TopLevel (3), AtaReq 0xb23fc000
Try ATAPI send 3
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b2673328)
  assume IN
AtapiSendCommand: SCSIOP_REQUEST_SENSE, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 3
AtapiSendCommand: SCSIOP_REQUEST_SENSE -> no dma setup (2)
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b2673328 Command 0x3 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x51
  continue with SCSIOP_REQUEST_SENSE
AtapiSendCommand: Entry Status (0x51)
AtapiSendCommand: F:0x0, CntHL:0x0:0x12.
AtapiSendCommand: Poll for int. to send packet. Status (0x51)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b26732f8
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x12
IdeIntr: Read 0x9 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf76af348, srb->DataBuffer 0xf76af348
70 00 06 00 00 00 00 0a 00 00 00 00 29 00 00 00 
00 00 
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf76af35a, srb->DataBuffer 0xf76af348, len 0x12
   Transfered 12, full size 12
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xb26732f8, status 1
AtapiInterrupt: RequestComplete, srb 0xb26732f8
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf772450c, CDB 0xf772453c, AtaReq 0xb23fc000, SCmd 0x1a
UniataNeedQueueing: TopLevel, qd=0
Send to device 1a
TopLevel (2), srb 0xf772450c
TopLevel (3), AtaReq 0xb23fc000
Try ATAPI send 1a
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f772453c)
  assume IN
AtapiSendCommand: try DMA setup
AtapiSendCommand: use_dma=0, Cmd 1a
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f772453c Command 0x1a to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0xc0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f772450c
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x51
  base status 0x51
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x51)
AtapiInterrupt: iReason 3
AtapiInterrupt: Error 0x54
  Bad Lba 0x0
  wait 10 ready after ATAPI error
  Intr on DRQ 0
AtapiInterrupt: ATAPI Error, int reason 3
Errors in PIO mode
AtapiInterrupt: Error
AtapiInterrupt: CompleteRequest, srbstatus 4
AtapiInterrupt: Error. Begin mapping...
MapError: Error register is 0x54
ATAPI: Illegal request
AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 60
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xf772450c, status 4
AtapiInterrupt: RequestComplete, srb 0xf772450c
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb26732f8, CDB 0xb2673328, AtaReq 0xb23fc000, SCmd 0x3
UniataNeedQueueing: TopLevel, qd=0
Send to device 3
TopLevel (2), srb 0xb26732f8
TopLevel (3), AtaReq 0xb23fc000
Try ATAPI send 3
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b2673328)
  assume IN
AtapiSendCommand: SCSIOP_REQUEST_SENSE, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 3
AtapiSendCommand: SCSIOP_REQUEST_SENSE -> no dma setup (2)
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b2673328 Command 0x3 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x51
  continue with SCSIOP_REQUEST_SENSE
AtapiSendCommand: Entry Status (0x51)
AtapiSendCommand: F:0x0, CntHL:0x0:0x12.
AtapiSendCommand: Poll for int. to send packet. Status (0x51)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b26732f8
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x12
IdeIntr: Read 0x9 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf76af348, srb->DataBuffer 0xf76af348
70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00 
00 00 
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf76af35a, srb->DataBuffer 0xf76af348, len 0x12
   Transfered 12, full size 12
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xb26732f8, status 1
AtapiInterrupt: RequestComplete, srb 0xb26732f8
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf772450c, CDB 0xf772453c, AtaReq 0xb23fc000, SCmd 0x1a
UniataNeedQueueing: TopLevel, qd=0
Send to device 1a
TopLevel (2), srb 0xf772450c
TopLevel (3), AtaReq 0xb23fc000
Try ATAPI send 1a
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f772453c)
  assume IN
AtapiSendCommand: try DMA setup
AtapiSendCommand: use_dma=0, Cmd 1a
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f772453c Command 0x1a to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0xc0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f772450c
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x51
  base status 0x51
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x51)
AtapiInterrupt: iReason 3
AtapiInterrupt: Error 0x54
  Bad Lba 0x0
  wait 10 ready after ATAPI error
  Intr on DRQ 0
AtapiInterrupt: ATAPI Error, int reason 3
Errors in PIO mode
AtapiInterrupt: Error
AtapiInterrupt: CompleteRequest, srbstatus 4
AtapiInterrupt: Error. Begin mapping...
MapError: Error register is 0x54
ATAPI: Illegal request
AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 60
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xf772450c, status 4
AtapiInterrupt: RequestComplete, srb 0xf772450c
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb26732f8, CDB 0xb2673328, AtaReq 0xb23fc000, SCmd 0x3
UniataNeedQueueing: TopLevel, qd=0
Send to device 3
TopLevel (2), srb 0xb26732f8
TopLevel (3), AtaReq 0xb23fc000
Try ATAPI send 3
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b2673328)
  assume IN
AtapiSendCommand: SCSIOP_REQUEST_SENSE, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 3
AtapiSendCommand: SCSIOP_REQUEST_SENSE -> no dma setup (2)
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b2673328 Command 0x3 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x51
  continue with SCSIOP_REQUEST_SENSE
AtapiSendCommand: Entry Status (0x51)
AtapiSendCommand: F:0x0, CntHL:0x0:0x12.
AtapiSendCommand: Poll for int. to send packet. Status (0x51)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b26732f8
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x12
IdeIntr: Read 0x9 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf76af348, srb->DataBuffer 0xf76af348
70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00 
00 00 
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf76af35a, srb->DataBuffer 0xf76af348, len 0x12
   Transfered 12, full size 12
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xb26732f8, status 1
AtapiInterrupt: RequestComplete, srb 0xb26732f8
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf7724530, CDB 0xf7724560, AtaReq 0xb23fc000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf7724530
TopLevel (3), AtaReq 0xb23fc000
Try ATAPI send 25
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f7724560)
  assume IN
AtapiSendCommand: zero/unaligned transfer 8, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 25
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f7724560 Command 0x25 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x8.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f7724530
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x51
  base status 0x51
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x51)
AtapiInterrupt: iReason 3
AtapiInterrupt: Error 0x24
  Bad Lba 0x0
  wait 10 ready after ATAPI error
  Intr on DRQ 0
AtapiInterrupt: ATAPI Error, int reason 3
Errors in PIO mode
AtapiInterrupt: Error
AtapiInterrupt: CompleteRequest, srbstatus 4
AtapiInterrupt: Error. Begin mapping...
MapError: Error register is 0x24
ATAPI: Device not ready
AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xf7724530, status 4
AtapiInterrupt: RequestComplete, srb 0xf7724530
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb26732f8, CDB 0xb2673328, AtaReq 0xb23fc000, SCmd 0x3
UniataNeedQueueing: TopLevel, qd=0
Send to device 3
TopLevel (2), srb 0xb26732f8
TopLevel (3), AtaReq 0xb23fc000
Try ATAPI send 3
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b2673328)
  assume IN
AtapiSendCommand: SCSIOP_REQUEST_SENSE, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 3
AtapiSendCommand: SCSIOP_REQUEST_SENSE -> no dma setup (2)
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b2673328 Command 0x3 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x51
  continue with SCSIOP_REQUEST_SENSE
AtapiSendCommand: Entry Status (0x51)
AtapiSendCommand: F:0x0, CntHL:0x0:0x12.
AtapiSendCommand: Poll for int. to send packet. Status (0x51)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b26732f8
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x12
IdeIntr: Read 0x9 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf76af348, srb->DataBuffer 0xf76af348
70 00 02 00 00 00 00 0a 00 00 00 00 3a 00 00 00 
00 00 
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf76af35a, srb->DataBuffer 0xf76af348, len 0x12
   Transfered 12, full size 12
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xb26732f8, status 1
AtapiInterrupt: RequestComplete, srb 0xb26732f8
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
(../drivers/storage/class/disk/disk.c:1562) Reading beyond partition end! startingOffset: 512, PartitionLength: 0
(../drivers/storage/class/disk/disk.c:1562) Reading beyond partition end! startingOffset: 512, PartitionLength: 0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf77241b0, CDB 0xf77241e0, AtaReq 0xb23fc000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf77241b0
TopLevel (3), AtaReq 0xb23fc000
Try ATAPI send 25
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f77241e0)
  assume IN
AtapiSendCommand: zero/unaligned transfer 8, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 25
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f77241e0 Command 0x25 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x8.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f77241b0
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x51
  base status 0x51
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x51)
AtapiInterrupt: iReason 3
AtapiInterrupt: Error 0x24
  Bad Lba 0x0
  wait 10 ready after ATAPI error
  Intr on DRQ 0
AtapiInterrupt: ATAPI Error, int reason 3
Errors in PIO mode
AtapiInterrupt: Error
AtapiInterrupt: CompleteRequest, srbstatus 4
AtapiInterrupt: Error. Begin mapping...
MapError: Error register is 0x24
ATAPI: Device not ready
AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xf77241b0, status 4
AtapiInterrupt: RequestComplete, srb 0xf77241b0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb26732f8, CDB 0xb2673328, AtaReq 0xb23fc000, SCmd 0x3
UniataNeedQueueing: TopLevel, qd=0
Send to device 3
TopLevel (2), srb 0xb26732f8
TopLevel (3), AtaReq 0xb23fc000
Try ATAPI send 3
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b2673328)
  assume IN
AtapiSendCommand: SCSIOP_REQUEST_SENSE, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 3
AtapiSendCommand: SCSIOP_REQUEST_SENSE -> no dma setup (2)
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b2673328 Command 0x3 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x51
  continue with SCSIOP_REQUEST_SENSE
AtapiSendCommand: Entry Status (0x51)
AtapiSendCommand: F:0x0, CntHL:0x0:0x12.
AtapiSendCommand: Poll for int. to send packet. Status (0x51)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b26732f8
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x12
IdeIntr: Read 0x9 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf76af290, srb->DataBuffer 0xf76af290
70 00 02 00 00 00 00 0a 00 00 00 00 3a 00 00 00 
00 00 
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf76af2a2, srb->DataBuffer 0xf76af290, len 0x12
   Transfered 12, full size 12
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xb26732f8, status 1
AtapiInterrupt: RequestComplete, srb 0xb26732f8
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
(../drivers/storage/class/disk/disk.c:1562) Reading beyond partition end! startingOffset: 512, PartitionLength: 0
(../drivers/storage/class/disk/disk.c:1570) Failing due to device not ready!
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xf772450c, CDB 0xf772453c, AtaReq 0xb23a8000, SCmd 0x1a
UniataNeedQueueing: TopLevel, qd=0
Send to device 1a
TopLevel (2), srb 0xf772450c
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7724278
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_MODE_SENSE PATH:LUN:TID = 0x0:0x0:0x0
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xf772450c complete with status 0x6
AtapiStartIo: AtapiDmaDBSync(b26788e0, f772450c)
AtapiStartIo: UniataRemoveRequest(b26788e0, f772450c)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26788e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xf772450c, CDB 0xf772453c, AtaReq 0xb23a8000, SCmd 0x1a
UniataNeedQueueing: TopLevel, qd=0
Send to device 1a
TopLevel (2), srb 0xf772450c
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7724278
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_MODE_SENSE PATH:LUN:TID = 0x0:0x0:0x0
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xf772450c complete with status 0x6
AtapiStartIo: AtapiDmaDBSync(b26788e0, f772450c)
AtapiStartIo: UniataRemoveRequest(b26788e0, f772450c)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26788e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xf7724530, CDB 0xf7724560, AtaReq 0xb23a8000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf7724530
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7724298
** Ide: Command AtaReq 0xb23a8000
** --- **
** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x0:0x0:0x0
** IDE disk 0x0 - #sectors 0x3f, #heads 0xff, #cylinders 0x2601
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xf7724530 complete with status 0x1
AtapiStartIo: AtapiDmaDBSync(b26788e0, f7724530)
AtapiStartIo: UniataRemoveRequest(b26788e0, f7724530)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26788e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb26732b0, CDB 0xb26732e0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb26732b0
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7724168
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76b0000, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76b0000)
AtapiVirtToPhysAddr_: f76b0000 -> 00000000:04f6f000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b26732b0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb26732b0, status 1
AtapiInterrupt: RequestComplete, srb 0xb26732b0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb26732b0, CDB 0xb26732e0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb26732b0
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7724078
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76b0000, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76b0000)
AtapiVirtToPhysAddr_: f76b0000 -> 00000000:04f6f000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b26732b0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb26732b0, status 1
AtapiInterrupt: RequestComplete, srb 0xb26732b0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xf77241b0, CDB 0xf77241e0, AtaReq 0xb23a8000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf77241b0
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7723f18
** Ide: Command AtaReq 0xb23a8000
** --- **
** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x0:0x0:0x0
** IDE disk 0x0 - #sectors 0x3f, #heads 0xff, #cylinders 0x2601
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xf77241b0 complete with status 0x1
AtapiStartIo: AtapiDmaDBSync(b26788e0, f77241b0)
AtapiStartIo: UniataRemoveRequest(b26788e0, f77241b0)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26788e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
(../drivers/storage/class/disk/disk.c:2252) HACK: Handling partition 0 request!
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb26732b0, CDB 0xb26732e0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb26732b0
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77240e0
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76b0008, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76b0008)
AtapiVirtToPhysAddr_: f76b0008 -> 00000000:04f6f008
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b26732b0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb26732b0, status 1
AtapiInterrupt: RequestComplete, srb 0xb26732b0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb26732b0, CDB 0xb26732e0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb26732b0
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77240f0
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76b0000, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76b0000)
AtapiVirtToPhysAddr_: f76b0000 -> 00000000:04f6f000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b26732b0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb26732b0, status 1
AtapiInterrupt: RequestComplete, srb 0xb26732b0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(../ntoskrnl/io/iomgr/driver.c:1647) '\Driver\floppy' initialization failed, status (0xc000000e)
(../ntoskrnl/io/iomgr/driver.c:64) Deleting driver object '\Driver\floppy'
(../drivers/storage/class/ramdisk/ramdisk.c:2438) FIXME: Installing from RamDisk is UNSUPPORTED!
Ext2Fsd -- Version 0.63 Checked -- May  4 2016 12:33:39.
Ext2Fsd:~0: 21:28:18:198 b266db18:   Ext2 DriverEntry ...
Ext2Fsd:~0: 21:28:18:213 b266db18:   Ext2QueryParameters: WritingSupport=0h
Ext2Fsd:~0: 21:28:18:213 b266db18:   Ext2QueryParameters: CheckingBitmap=0h
Ext2Fsd:~0: 21:28:18:228 b266db18:   Ext2QueryParameters: Ext3ForceWriting=0h
Ext2Fsd:~0: 21:28:18:228 b266db18:   Ext2QueryParameters: AutoMount=0h
Ext2Fsd:~0: 21:28:18:243 b266db18:   Ext2QueryParameters: CodePage not specified.
Ext2Fsd:~0: 21:28:18:243 b266db18:   Ext2QueryParameters: HidingPrefix not specified.
Ext2Fsd:~0: 21:28:18:258 b266db18:   Ext2QueryParameters: HidingSuffix not specified.
Btrfs ERR : read_registry : ZwCreateKey returned c0000034
(../hal/halx86/legacy/halpnpdd.c:793) Illegal IRP: c
(../hal/halx86/legacy/halpnpdd.c:793) Illegal IRP: c
(../hal/halx86/legacy/halpnpdd.c:793) Illegal IRP: 15
(../ntoskrnl/io/iomgr/file.c:554) Using IopParseDevice() hack. Requested invalid attributes: 0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf7724728, CDB 0xf7724758, AtaReq 0xb23fc000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf7724728
TopLevel (3), AtaReq 0xb23fc000
Try ATAPI send 25
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f7724758)
  assume IN
AtapiSendCommand: zero/unaligned transfer 8, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 25
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f7724758 Command 0x25 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x8.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f7724728
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x51
  base status 0x51
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x51)
AtapiInterrupt: iReason 3
AtapiInterrupt: Error 0x24
  Bad Lba 0x0
  wait 10 ready after ATAPI error
  Intr on DRQ 0
AtapiInterrupt: ATAPI Error, int reason 3
Errors in PIO mode
AtapiInterrupt: Error
AtapiInterrupt: CompleteRequest, srbstatus 4
AtapiInterrupt: Error. Begin mapping...
MapError: Error register is 0x24
ATAPI: Device not ready
AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xf7724728, status 4
AtapiInterrupt: RequestComplete, srb 0xf7724728
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb23a4118, CDB 0xb23a4148, AtaReq 0xb23fc000, SCmd 0x3
UniataNeedQueueing: TopLevel, qd=0
Send to device 3
TopLevel (2), srb 0xb23a4118
TopLevel (3), AtaReq 0xb23fc000
Try ATAPI send 3
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b23a4148)
  assume IN
AtapiSendCommand: SCSIOP_REQUEST_SENSE, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 3
AtapiSendCommand: SCSIOP_REQUEST_SENSE -> no dma setup (2)
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b23a4148 Command 0x3 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x51
  continue with SCSIOP_REQUEST_SENSE
AtapiSendCommand: Entry Status (0x51)
AtapiSendCommand: F:0x0, CntHL:0x0:0x12.
AtapiSendCommand: Poll for int. to send packet. Status (0x51)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b23a4118
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x12
IdeIntr: Read 0x9 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf76a79d0, srb->DataBuffer 0xf76a79d0
70 00 02 00 00 00 00 0a 00 00 00 00 3a 00 00 00 
00 00 
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf76a79e2, srb->DataBuffer 0xf76a79d0, len 0x12
   Transfered 12, full size 12
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xb23a4118, status 1
AtapiInterrupt: RequestComplete, srb 0xb23a4118
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
(../ntoskrnl/io/iomgr/file.c:554) Using IopParseDevice() hack. Requested invalid attributes: 0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb26732b0, CDB 0xb26732e0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb26732b0
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7724538
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76a8720, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76a8720)
AtapiVirtToPhysAddr_: f76a8720 -> 00000000:04ca1720
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b26732b0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb26732b0, status 1
AtapiInterrupt: RequestComplete, srb 0xb26732b0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb26732b0, CDB 0xb26732e0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb26732b0
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7724438
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76a8000, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76a8000)
AtapiVirtToPhysAddr_: f76a8000 -> 00000000:04c9f000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b26732b0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb26732b0, status 1
AtapiInterrupt: RequestComplete, srb 0xb26732b0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(../drivers/storage/class/disk/disk.c:2252) HACK: Handling partition 0 request!
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb26732b0, CDB 0xb26732e0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb26732b0
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77244a0
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76a8518, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76a8518)
AtapiVirtToPhysAddr_: f76a8518 -> 00000000:04ca1518
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b26732b0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb26732b0, status 1
AtapiInterrupt: RequestComplete, srb 0xb26732b0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb26732b0, CDB 0xb26732e0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb26732b0
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7724588
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76a8000, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76a8000)
AtapiVirtToPhysAddr_: f76a8000 -> 00000000:04ca0000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b26732b0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb26732b0, status 1
AtapiInterrupt: RequestComplete, srb 0xb26732b0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb26732b0, CDB 0xb26732e0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb26732b0
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77245f0
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76a82a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76a82a0)
AtapiVirtToPhysAddr_: f76a82a0 -> 00000000:04ca12a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b26732b0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb26732b0, status 1
AtapiInterrupt: RequestComplete, srb 0xb26732b0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb2672180, CDB 0xb26721b0, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2672180
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b26721b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0xc, data f76a8008, count 800, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f76a8008)
AtapiVirtToPhysAddr_: f76a8008 -> 00000000:04ca0008
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 1 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: restore IO mode on Device 0, last dev 1
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
Intel 0
AtaSetTransferMode: Set 0x42 on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x42 feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b26721b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x8:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x41, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b2672180
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  DmaTransfer + !BM_STATUS_INTR (1)
  getting status...
  status 0xc0
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 800, full size 800
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2672180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2672180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Ext2Fsd:~0: 21:28:20:822 b266db18: System IRP_MJ_FILE_SYSTEM_CONTROL \Ext2CdFsd IRP_MN_MOUNT_VOLUME DeviceObject: 0xb23a72c8
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb23a2928, CDB 0xb23a2958, AtaReq 0xb267d000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xb23a2928
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 25
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb b23a2958)
  assume IN
AtapiSendCommand: zero/unaligned transfer 8, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 25
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiDmaReinit: set PIO mode on Device 0 (42 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
Intel 0
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b23a2958 Command 0x25 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x8.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b23a2928
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x8
IdeIntr: Read 0x4 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xb26901e8, srb->DataBuffer 0xb26901e8
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xb26901f0, srb->DataBuffer 0xb26901e8, len 0x8
   Transfered 8, full size 8
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23a2928, status 1
AtapiInterrupt: RequestComplete, srb 0xb23a2928
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb2672180, CDB 0xb26721b0, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2672180
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b26721b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0xc, data f76a87f0, count 800, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f76a87f0)
AtapiVirtToPhysAddr_: f76a87f0 -> 00000000:001c07f0
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 1 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
Intel 0
AtaSetTransferMode: Set 0x42 on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x42 feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b26721b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x8:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x41, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b2672180
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  DmaTransfer + !BM_STATUS_INTR (1)
  getting status...
  status 0x50
  special case DMA + ATAPI + IDE_STATUS_DSC -> our
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 800, full size 800
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2672180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2672180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
Ext2Fsd:~0: 21:28:21:437 b266db18: System IRP_MJ_FILE_SYSTEM_CONTROL Status: STATUS_UNRECOGNIZED_VOLUME (0xc000014f).
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb23a2928, CDB 0xb23a2958, AtaReq 0xb267d000, SCmd 0x43
UniataNeedQueueing: TopLevel, qd=0
Send to device 43
TopLevel (2), srb 0xb23a2928
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 43
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 43 (Cdb b23a2958)
  assume IN
AtapiSendCommand: zero/unaligned transfer 324, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 43
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiDmaReinit: set PIO mode on Device 0 (42 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
Intel 0
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b23a2958 Command 0x43 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x3:0x24.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b23a2928
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x14
AtapiInterrupt: 402 words requested; 10 words xferred
IdeIntr: Read 0xa words
IdeIntr: PIO Read AtaReq->DataBuffer 0xb23a09a8, srb->DataBuffer 0xb23a09a8
  status re-check 0x50
AtapiInterrupt: early complete + underrun ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
WordsLeft 0x188 -> SRB_STATUS_DATA_OVERRUN
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xb23a09bc, srb->DataBuffer 0xb23a09a8, len 0x324
AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 188
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xb23a2928, status 12
AtapiInterrupt: RequestComplete, srb 0xb23a2928
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb2672180, CDB 0xb26721b0, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2672180
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b26721b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0xc, data f76a8008, count 800, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f76a8008)
AtapiVirtToPhysAddr_: f76a8008 -> 00000000:04c9f008
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 1 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
Intel 0
AtaSetTransferMode: Set 0x42 on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x42 feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b26721b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x8:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x41, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b2672180
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 800, full size 800
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2672180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2672180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb2672180, CDB 0xb26721b0, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2672180
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b26721b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f76a8008, count 800, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f76a8008)
AtapiVirtToPhysAddr_: f76a8008 -> 00000000:04c9f008
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 1 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b26721b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x8:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b2672180
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 800, full size 800
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2672180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2672180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb2672180, CDB 0xb26721b0, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2672180
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b26721b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f76a8008, count 800, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f76a8008)
AtapiVirtToPhysAddr_: f76a8008 -> 00000000:04c9f008
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 1 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b26721b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x8:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b2672180
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 800, full size 800
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2672180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2672180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb2672180, CDB 0xb26721b0, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2672180
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b26721b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f76a8008, count 800, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f76a8008)
AtapiVirtToPhysAddr_: f76a8008 -> 00000000:04c9f008
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 1 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b26721b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x8:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b2672180
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 800, full size 800
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2672180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2672180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb23a2928, CDB 0xb23a2958, AtaReq 0xb267d000, SCmd 0x0
UniataNeedQueueing: TopLevel, qd=0
Send to device 0
TopLevel (2), srb 0xb23a2928
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 0
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b23a2958)
  assume 0-transfer
AtapiSendCommand: zero/unaligned transfer 0, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 0
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiDmaReinit: set PIO mode on Device 0 (42 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
Intel 0
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b23a2958 Command 0x0 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b23a2928
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: wordCount 0x0, WordsTransfered 0x0
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0x0, srb->DataBuffer 0x0, len 0x0
   Transfered 0, full size 0
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23a2928, status 1
AtapiInterrupt: RequestComplete, srb 0xb23a2928
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb2672180, CDB 0xb26721b0, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2672180
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b26721b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0xc, data f7669000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7669000)
AtapiVirtToPhysAddr_: f7669000 -> 00000000:001d1000
  get Phys(data[n=1+1000]=f766a000)
AtapiVirtToPhysAddr_: f766a000 -> 00000000:001d3000
  get Phys(data[n=2+1000]=f766b000)
AtapiVirtToPhysAddr_: f766b000 -> 00000000:001d4000
  get Phys(data[n=2+2000]=f766c000)
AtapiVirtToPhysAddr_: f766c000 -> 00000000:001d5000
  get Phys(data[n=2+3000]=f766d000)
AtapiVirtToPhysAddr_: f766d000 -> 00000000:001d6000
  get Phys(data[n=2+4000]=f766e000)
AtapiVirtToPhysAddr_: f766e000 -> 00000000:001d7000
  get Phys(data[n=2+5000]=f766f000)
AtapiVirtToPhysAddr_: f766f000 -> 00000000:001b8000
  get Phys(data[n=3+1000]=f7670000)
AtapiVirtToPhysAddr_: f7670000 -> 00000000:001c9000
  get Phys(data[n=4+1000]=f7671000)
AtapiVirtToPhysAddr_: f7671000 -> 00000000:001ca000
  get Phys(data[n=4+2000]=f7672000)
AtapiVirtToPhysAddr_: f7672000 -> 00000000:001cb000
  get Phys(data[n=4+3000]=f7673000)
AtapiVirtToPhysAddr_: f7673000 -> 00000000:001cc000
  get Phys(data[n=4+4000]=f7674000)
AtapiVirtToPhysAddr_: f7674000 -> 00000000:001cd000
  get Phys(data[n=4+5000]=f7675000)
AtapiVirtToPhysAddr_: f7675000 -> 00000000:001ce000
  get Phys(data[n=4+6000]=f7676000)
AtapiVirtToPhysAddr_: f7676000 -> 00000000:001cf000
  get Phys(data[n=4+7000]=f7677000)
AtapiVirtToPhysAddr_: f7677000 -> 00000000:001b0000
  get Phys(data[n=5+1000]=f7678000)
AtapiVirtToPhysAddr_: f7678000 -> 00000000:001c1000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 6 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
Intel 0
AtaSetTransferMode: Set 0x42 on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x42 feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b26721b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x41, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b2672180
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  DmaTransfer + !BM_STATUS_INTR (1)
  getting status...
  status 0xd0
  special case DMA + ATAPI + IDE_STATUS_DSC -> our
  ATAPI status 0xd0
  ATAPI additional check
  status re-check 0xd0
  Error reg (0xd0)
  still BUSY, seems it is not our
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2672180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2672180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb23a2928, CDB 0xb23a2958, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23a2928
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b23a2958)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f7679000, count 10000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7679000)
AtapiVirtToPhysAddr_: f7679000 -> 00000000:001c2000
  get Phys(data[n=1+1000]=f767a000)
AtapiVirtToPhysAddr_: f767a000 -> 00000000:001c3000
  get Phys(data[n=1+2000]=f767b000)
AtapiVirtToPhysAddr_: f767b000 -> 00000000:001c4000
  get Phys(data[n=1+3000]=f767c000)
AtapiVirtToPhysAddr_: f767c000 -> 00000000:001c5000
  get Phys(data[n=1+4000]=f767d000)
AtapiVirtToPhysAddr_: f767d000 -> 00000000:001c6000
  get Phys(data[n=1+5000]=f767e000)
AtapiVirtToPhysAddr_: f767e000 -> 00000000:001c7000
  get Phys(data[n=1+6000]=f767f000)
AtapiVirtToPhysAddr_: f767f000 -> 00000000:001a8000
  get Phys(data[n=2+1000]=f7680000)
AtapiVirtToPhysAddr_: f7680000 -> 00000000:001b9000
  get Phys(data[n=3+1000]=f7681000)
AtapiVirtToPhysAddr_: f7681000 -> 00000000:001ba000
  get Phys(data[n=3+2000]=f7682000)
AtapiVirtToPhysAddr_: f7682000 -> 00000000:001bb000
  get Phys(data[n=3+3000]=f7683000)
AtapiVirtToPhysAddr_: f7683000 -> 00000000:001bc000
  get Phys(data[n=3+4000]=f7684000)
AtapiVirtToPhysAddr_: f7684000 -> 00000000:001bd000
  get Phys(data[n=3+5000]=f7685000)
AtapiVirtToPhysAddr_: f7685000 -> 00000000:001be000
  get Phys(data[n=3+6000]=f7686000)
AtapiVirtToPhysAddr_: f7686000 -> 00000000:001bf000
  get Phys(data[n=3+7000]=f7687000)
AtapiVirtToPhysAddr_: f7687000 -> 00000000:001a0000
  get Phys(data[n=4+1000]=f7688000)
AtapiVirtToPhysAddr_: f7688000 -> 00000000:001b1000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 5 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b23a2958 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b23a2928
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23a2928, status 1
AtapiInterrupt: RequestComplete, srb 0xb23a2928
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb23a0240, CDB 0xb23a0270, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23a0240
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b23a0270)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f7689000, count 10000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7689000)
AtapiVirtToPhysAddr_: f7689000 -> 00000000:001b2000
  get Phys(data[n=1+1000]=f768a000)
AtapiVirtToPhysAddr_: f768a000 -> 00000000:001b3000
  get Phys(data[n=1+2000]=f768b000)
AtapiVirtToPhysAddr_: f768b000 -> 00000000:001b4000
  get Phys(data[n=1+3000]=f768c000)
AtapiVirtToPhysAddr_: f768c000 -> 00000000:001b5000
  get Phys(data[n=1+4000]=f768d000)
AtapiVirtToPhysAddr_: f768d000 -> 00000000:001b6000
  get Phys(data[n=1+5000]=f768e000)
AtapiVirtToPhysAddr_: f768e000 -> 00000000:001b7000
  get Phys(data[n=1+6000]=f768f000)
AtapiVirtToPhysAddr_: f768f000 -> 00000000:00198000
  get Phys(data[n=2+1000]=f7690000)
AtapiVirtToPhysAddr_: f7690000 -> 00000000:001a9000
  get Phys(data[n=3+1000]=f7691000)
AtapiVirtToPhysAddr_: f7691000 -> 00000000:001aa000
  get Phys(data[n=3+2000]=f7692000)
AtapiVirtToPhysAddr_: f7692000 -> 00000000:001ab000
  get Phys(data[n=3+3000]=f7693000)
AtapiVirtToPhysAddr_: f7693000 -> 00000000:001ac000
  get Phys(data[n=3+4000]=f7694000)
AtapiVirtToPhysAddr_: f7694000 -> 00000000:001ad000
  get Phys(data[n=3+5000]=f7695000)
AtapiVirtToPhysAddr_: f7695000 -> 00000000:001ae000
  get Phys(data[n=3+6000]=f7696000)
AtapiVirtToPhysAddr_: f7696000 -> 00000000:001af000
  get Phys(data[n=3+7000]=f7697000)
AtapiVirtToPhysAddr_: f7697000 -> 00000000:00190000
  get Phys(data[n=4+1000]=f7698000)
AtapiVirtToPhysAddr_: f7698000 -> 00000000:001a1000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 5 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b23a0270 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b23a0240
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23a0240, status 1
AtapiInterrupt: RequestComplete, srb 0xb23a0240
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb239fe28, CDB 0xb239fe58, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb239fe28
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b239fe58)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f7699000, count 10000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7699000)
AtapiVirtToPhysAddr_: f7699000 -> 00000000:001a2000
  get Phys(data[n=1+1000]=f769a000)
AtapiVirtToPhysAddr_: f769a000 -> 00000000:001a3000
  get Phys(data[n=1+2000]=f769b000)
AtapiVirtToPhysAddr_: f769b000 -> 00000000:001a4000
  get Phys(data[n=1+3000]=f769c000)
AtapiVirtToPhysAddr_: f769c000 -> 00000000:001a5000
  get Phys(data[n=1+4000]=f769d000)
AtapiVirtToPhysAddr_: f769d000 -> 00000000:001a6000
  get Phys(data[n=1+5000]=f769e000)
AtapiVirtToPhysAddr_: f769e000 -> 00000000:001a7000
  get Phys(data[n=1+6000]=f769f000)
AtapiVirtToPhysAddr_: f769f000 -> 00000000:00188000
  get Phys(data[n=2+1000]=f76a0000)
AtapiVirtToPhysAddr_: f76a0000 -> 00000000:00199000
  get Phys(data[n=3+1000]=f76a1000)
AtapiVirtToPhysAddr_: f76a1000 -> 00000000:0019a000
  get Phys(data[n=3+2000]=f76a2000)
AtapiVirtToPhysAddr_: f76a2000 -> 00000000:0019b000
  get Phys(data[n=3+3000]=f76a3000)
AtapiVirtToPhysAddr_: f76a3000 -> 00000000:0019c000
  get Phys(data[n=3+4000]=f76a4000)
AtapiVirtToPhysAddr_: f76a4000 -> 00000000:0019d000
  get Phys(data[n=3+5000]=f76a5000)
AtapiVirtToPhysAddr_: f76a5000 -> 00000000:0019e000
  get Phys(data[n=3+6000]=f76a6000)
AtapiVirtToPhysAddr_: f76a6000 -> 00000000:0019f000
  get Phys(data[n=3+7000]=f76a7000)
AtapiVirtToPhysAddr_: f76a7000 -> 00000000:00180000
  get Phys(data[n=4+1000]=f76a8000)
AtapiVirtToPhysAddr_: f76a8000 -> 00000000:00191000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 5 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b239fe58 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b239fe28
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb239fe28, status 1
AtapiInterrupt: RequestComplete, srb 0xb239fe28
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb239fe28, CDB 0xb239fe58, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb239fe28
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b239fe58)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f7669000, count 10000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7669000)
AtapiVirtToPhysAddr_: f7669000 -> 00000000:00192000
  get Phys(data[n=1+1000]=f766a000)
AtapiVirtToPhysAddr_: f766a000 -> 00000000:00193000
  get Phys(data[n=1+2000]=f766b000)
AtapiVirtToPhysAddr_: f766b000 -> 00000000:00194000
  get Phys(data[n=1+3000]=f766c000)
AtapiVirtToPhysAddr_: f766c000 -> 00000000:00195000
  get Phys(data[n=1+4000]=f766d000)
AtapiVirtToPhysAddr_: f766d000 -> 00000000:00196000
  get Phys(data[n=1+5000]=f766e000)
AtapiVirtToPhysAddr_: f766e000 -> 00000000:00197000
  get Phys(data[n=1+6000]=f766f000)
AtapiVirtToPhysAddr_: f766f000 -> 00000000:00178000
  get Phys(data[n=2+1000]=f7670000)
AtapiVirtToPhysAddr_: f7670000 -> 00000000:00189000
  get Phys(data[n=3+1000]=f7671000)
AtapiVirtToPhysAddr_: f7671000 -> 00000000:0018a000
  get Phys(data[n=3+2000]=f7672000)
AtapiVirtToPhysAddr_: f7672000 -> 00000000:0018b000
  get Phys(data[n=3+3000]=f7673000)
AtapiVirtToPhysAddr_: f7673000 -> 00000000:0018c000
  get Phys(data[n=3+4000]=f7674000)
AtapiVirtToPhysAddr_: f7674000 -> 00000000:0018d000
  get Phys(data[n=3+5000]=f7675000)
AtapiVirtToPhysAddr_: f7675000 -> 00000000:0018e000
  get Phys(data[n=3+6000]=f7676000)
AtapiVirtToPhysAddr_: f7676000 -> 00000000:0018f000
  get Phys(data[n=3+7000]=f7677000)
AtapiVirtToPhysAddr_: f7677000 -> 00000000:00170000
  get Phys(data[n=4+1000]=f7678000)
AtapiVirtToPhysAddr_: f7678000 -> 00000000:00181000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 5 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b239fe58 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b239fe28
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb239fe28, status 1
AtapiInterrupt: RequestComplete, srb 0xb239fe28
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb23a0240, CDB 0xb23a0270, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23a0240
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b23a0270)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f7679000, count 10000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7679000)
AtapiVirtToPhysAddr_: f7679000 -> 00000000:00182000
  get Phys(data[n=1+1000]=f767a000)
AtapiVirtToPhysAddr_: f767a000 -> 00000000:00183000
  get Phys(data[n=1+2000]=f767b000)
AtapiVirtToPhysAddr_: f767b000 -> 00000000:00184000
  get Phys(data[n=1+3000]=f767c000)
AtapiVirtToPhysAddr_: f767c000 -> 00000000:00185000
  get Phys(data[n=1+4000]=f767d000)
AtapiVirtToPhysAddr_: f767d000 -> 00000000:00186000
  get Phys(data[n=1+5000]=f767e000)
AtapiVirtToPhysAddr_: f767e000 -> 00000000:00187000
  get Phys(data[n=1+6000]=f767f000)
AtapiVirtToPhysAddr_: f767f000 -> 00000000:00168000
  get Phys(data[n=2+1000]=f7680000)
AtapiVirtToPhysAddr_: f7680000 -> 00000000:00179000
  get Phys(data[n=3+1000]=f7681000)
AtapiVirtToPhysAddr_: f7681000 -> 00000000:0017a000
  get Phys(data[n=3+2000]=f7682000)
AtapiVirtToPhysAddr_: f7682000 -> 00000000:0017b000
  get Phys(data[n=3+3000]=f7683000)
AtapiVirtToPhysAddr_: f7683000 -> 00000000:0017c000
  get Phys(data[n=3+4000]=f7684000)
AtapiVirtToPhysAddr_: f7684000 -> 00000000:0017d000
  get Phys(data[n=3+5000]=f7685000)
AtapiVirtToPhysAddr_: f7685000 -> 00000000:0017e000
  get Phys(data[n=3+6000]=f7686000)
AtapiVirtToPhysAddr_: f7686000 -> 00000000:0017f000
  get Phys(data[n=3+7000]=f7687000)
AtapiVirtToPhysAddr_: f7687000 -> 00000000:00160000
  get Phys(data[n=4+1000]=f7688000)
AtapiVirtToPhysAddr_: f7688000 -> 00000000:00171000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 5 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b23a0270 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b23a0240
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23a0240, status 1
AtapiInterrupt: RequestComplete, srb 0xb23a0240
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb23a2928, CDB 0xb23a2958, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23a2928
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b23a2958)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f7689000, count 10000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7689000)
AtapiVirtToPhysAddr_: f7689000 -> 00000000:00172000
  get Phys(data[n=1+1000]=f768a000)
AtapiVirtToPhysAddr_: f768a000 -> 00000000:00173000
  get Phys(data[n=1+2000]=f768b000)
AtapiVirtToPhysAddr_: f768b000 -> 00000000:00174000
  get Phys(data[n=1+3000]=f768c000)
AtapiVirtToPhysAddr_: f768c000 -> 00000000:00175000
  get Phys(data[n=1+4000]=f768d000)
AtapiVirtToPhysAddr_: f768d000 -> 00000000:00176000
  get Phys(data[n=1+5000]=f768e000)
AtapiVirtToPhysAddr_: f768e000 -> 00000000:00177000
  get Phys(data[n=1+6000]=f768f000)
AtapiVirtToPhysAddr_: f768f000 -> 00000000:00158000
  get Phys(data[n=2+1000]=f7690000)
AtapiVirtToPhysAddr_: f7690000 -> 00000000:00169000
  get Phys(data[n=3+1000]=f7691000)
AtapiVirtToPhysAddr_: f7691000 -> 00000000:0016a000
  get Phys(data[n=3+2000]=f7692000)
AtapiVirtToPhysAddr_: f7692000 -> 00000000:0016b000
  get Phys(data[n=3+3000]=f7693000)
AtapiVirtToPhysAddr_: f7693000 -> 00000000:0016c000
  get Phys(data[n=3+4000]=f7694000)
AtapiVirtToPhysAddr_: f7694000 -> 00000000:0016d000
  get Phys(data[n=3+5000]=f7695000)
AtapiVirtToPhysAddr_: f7695000 -> 00000000:0016e000
  get Phys(data[n=3+6000]=f7696000)
AtapiVirtToPhysAddr_: f7696000 -> 00000000:0016f000
  get Phys(data[n=3+7000]=f7697000)
AtapiVirtToPhysAddr_: f7697000 -> 00000000:00150000
  get Phys(data[n=4+1000]=f7698000)
AtapiVirtToPhysAddr_: f7698000 -> 00000000:00161000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 5 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b23a2958 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b23a2928
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23a2928, status 1
AtapiInterrupt: RequestComplete, srb 0xb23a2928
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb2672180, CDB 0xb26721b0, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2672180
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b26721b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f7699000, count 10000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7699000)
AtapiVirtToPhysAddr_: f7699000 -> 00000000:00162000
  get Phys(data[n=1+1000]=f769a000)
AtapiVirtToPhysAddr_: f769a000 -> 00000000:00163000
  get Phys(data[n=1+2000]=f769b000)
AtapiVirtToPhysAddr_: f769b000 -> 00000000:00164000
  get Phys(data[n=1+3000]=f769c000)
AtapiVirtToPhysAddr_: f769c000 -> 00000000:00165000
  get Phys(data[n=1+4000]=f769d000)
AtapiVirtToPhysAddr_: f769d000 -> 00000000:00166000
  get Phys(data[n=1+5000]=f769e000)
AtapiVirtToPhysAddr_: f769e000 -> 00000000:00167000
  get Phys(data[n=1+6000]=f769f000)
AtapiVirtToPhysAddr_: f769f000 -> 00000000:00148000
  get Phys(data[n=2+1000]=f76a0000)
AtapiVirtToPhysAddr_: f76a0000 -> 00000000:00159000
  get Phys(data[n=3+1000]=f76a1000)
AtapiVirtToPhysAddr_: f76a1000 -> 00000000:0015a000
  get Phys(data[n=3+2000]=f76a2000)
AtapiVirtToPhysAddr_: f76a2000 -> 00000000:0015b000
  get Phys(data[n=3+3000]=f76a3000)
AtapiVirtToPhysAddr_: f76a3000 -> 00000000:0015c000
  get Phys(data[n=3+4000]=f76a4000)
AtapiVirtToPhysAddr_: f76a4000 -> 00000000:0015d000
  get Phys(data[n=3+5000]=f76a5000)
AtapiVirtToPhysAddr_: f76a5000 -> 00000000:0015e000
  get Phys(data[n=3+6000]=f76a6000)
AtapiVirtToPhysAddr_: f76a6000 -> 00000000:0015f000
  get Phys(data[n=3+7000]=f76a7000)
AtapiVirtToPhysAddr_: f76a7000 -> 00000000:00140000
  get Phys(data[n=4+1000]=f76a8000)
AtapiVirtToPhysAddr_: f76a8000 -> 00000000:00151000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 5 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b26721b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b2672180
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2672180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2672180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb2672180, CDB 0xb26721b0, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2672180
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b26721b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f7669000, count 10000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7669000)
AtapiVirtToPhysAddr_: f7669000 -> 00000000:00152000
  get Phys(data[n=1+1000]=f766a000)
AtapiVirtToPhysAddr_: f766a000 -> 00000000:00153000
  get Phys(data[n=1+2000]=f766b000)
AtapiVirtToPhysAddr_: f766b000 -> 00000000:00154000
  get Phys(data[n=1+3000]=f766c000)
AtapiVirtToPhysAddr_: f766c000 -> 00000000:00155000
  get Phys(data[n=1+4000]=f766d000)
AtapiVirtToPhysAddr_: f766d000 -> 00000000:00156000
  get Phys(data[n=1+5000]=f766e000)
AtapiVirtToPhysAddr_: f766e000 -> 00000000:00157000
  get Phys(data[n=1+6000]=f766f000)
AtapiVirtToPhysAddr_: f766f000 -> 00000000:00138000
  get Phys(data[n=2+1000]=f7670000)
AtapiVirtToPhysAddr_: f7670000 -> 00000000:00149000
  get Phys(data[n=3+1000]=f7671000)
AtapiVirtToPhysAddr_: f7671000 -> 00000000:0014a000
  get Phys(data[n=3+2000]=f7672000)
AtapiVirtToPhysAddr_: f7672000 -> 00000000:0014b000
  get Phys(data[n=3+3000]=f7673000)
AtapiVirtToPhysAddr_: f7673000 -> 00000000:0014c000
  get Phys(data[n=3+4000]=f7674000)
AtapiVirtToPhysAddr_: f7674000 -> 00000000:0014d000
  get Phys(data[n=3+5000]=f7675000)
AtapiVirtToPhysAddr_: f7675000 -> 00000000:0014e000
  get Phys(data[n=3+6000]=f7676000)
AtapiVirtToPhysAddr_: f7676000 -> 00000000:0014f000
  get Phys(data[n=3+7000]=f7677000)
AtapiVirtToPhysAddr_: f7677000 -> 00000000:00130000
  get Phys(data[n=4+1000]=f7678000)
AtapiVirtToPhysAddr_: f7678000 -> 00000000:00141000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 5 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b26721b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b2672180
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2672180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2672180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb23a2928, CDB 0xb23a2958, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23a2928
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b23a2958)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f7679000, count 10000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7679000)
AtapiVirtToPhysAddr_: f7679000 -> 00000000:00142000
  get Phys(data[n=1+1000]=f767a000)
AtapiVirtToPhysAddr_: f767a000 -> 00000000:00143000
  get Phys(data[n=1+2000]=f767b000)
AtapiVirtToPhysAddr_: f767b000 -> 00000000:00144000
  get Phys(data[n=1+3000]=f767c000)
AtapiVirtToPhysAddr_: f767c000 -> 00000000:00145000
  get Phys(data[n=1+4000]=f767d000)
AtapiVirtToPhysAddr_: f767d000 -> 00000000:00146000
  get Phys(data[n=1+5000]=f767e000)
AtapiVirtToPhysAddr_: f767e000 -> 00000000:00147000
  get Phys(data[n=1+6000]=f767f000)
AtapiVirtToPhysAddr_: f767f000 -> 00000000:00128000
  get Phys(data[n=2+1000]=f7680000)
AtapiVirtToPhysAddr_: f7680000 -> 00000000:00139000
  get Phys(data[n=3+1000]=f7681000)
AtapiVirtToPhysAddr_: f7681000 -> 00000000:0013a000
  get Phys(data[n=3+2000]=f7682000)
AtapiVirtToPhysAddr_: f7682000 -> 00000000:0013b000
  get Phys(data[n=3+3000]=f7683000)
AtapiVirtToPhysAddr_: f7683000 -> 00000000:0013c000
  get Phys(data[n=3+4000]=f7684000)
AtapiVirtToPhysAddr_: f7684000 -> 00000000:0013d000
  get Phys(data[n=3+5000]=f7685000)
AtapiVirtToPhysAddr_: f7685000 -> 00000000:0013e000
  get Phys(data[n=3+6000]=f7686000)
AtapiVirtToPhysAddr_: f7686000 -> 00000000:0013f000
  get Phys(data[n=3+7000]=f7687000)
AtapiVirtToPhysAddr_: f7687000 -> 00000000:00120000
  get Phys(data[n=4+1000]=f7688000)
AtapiVirtToPhysAddr_: f7688000 -> 00000000:00131000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 5 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b23a2958 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b23a2928
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23a2928, status 1
AtapiInterrupt: RequestComplete, srb 0xb23a2928
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb23a0240, CDB 0xb23a0270, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23a0240
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b23a0270)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f7689000, count 10000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7689000)
AtapiVirtToPhysAddr_: f7689000 -> 00000000:00132000
  get Phys(data[n=1+1000]=f768a000)
AtapiVirtToPhysAddr_: f768a000 -> 00000000:00133000
  get Phys(data[n=1+2000]=f768b000)
AtapiVirtToPhysAddr_: f768b000 -> 00000000:00134000
  get Phys(data[n=1+3000]=f768c000)
AtapiVirtToPhysAddr_: f768c000 -> 00000000:00135000
  get Phys(data[n=1+4000]=f768d000)
AtapiVirtToPhysAddr_: f768d000 -> 00000000:00136000
  get Phys(data[n=1+5000]=f768e000)
AtapiVirtToPhysAddr_: f768e000 -> 00000000:00137000
  get Phys(data[n=1+6000]=f768f000)
AtapiVirtToPhysAddr_: f768f000 -> 00000000:00118000
  get Phys(data[n=2+1000]=f7690000)
AtapiVirtToPhysAddr_: f7690000 -> 00000000:00129000
  get Phys(data[n=3+1000]=f7691000)
AtapiVirtToPhysAddr_: f7691000 -> 00000000:0012a000
  get Phys(data[n=3+2000]=f7692000)
AtapiVirtToPhysAddr_: f7692000 -> 00000000:0012b000
  get Phys(data[n=3+3000]=f7693000)
AtapiVirtToPhysAddr_: f7693000 -> 00000000:0012c000
  get Phys(data[n=3+4000]=f7694000)
AtapiVirtToPhysAddr_: f7694000 -> 00000000:0012d000
  get Phys(data[n=3+5000]=f7695000)
AtapiVirtToPhysAddr_: f7695000 -> 00000000:0012e000
  get Phys(data[n=3+6000]=f7696000)
AtapiVirtToPhysAddr_: f7696000 -> 00000000:0012f000
  get Phys(data[n=3+7000]=f7697000)
AtapiVirtToPhysAddr_: f7697000 -> 00000000:00110000
  get Phys(data[n=4+1000]=f7698000)
AtapiVirtToPhysAddr_: f7698000 -> 00000000:00121000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 5 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b23a0270 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b23a0240
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23a0240, status 1
AtapiInterrupt: RequestComplete, srb 0xb23a0240
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb239fe28, CDB 0xb239fe58, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb239fe28
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b239fe58)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f7699000, count 10000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7699000)
AtapiVirtToPhysAddr_: f7699000 -> 00000000:00122000
  get Phys(data[n=1+1000]=f769a000)
AtapiVirtToPhysAddr_: f769a000 -> 00000000:00123000
  get Phys(data[n=1+2000]=f769b000)
AtapiVirtToPhysAddr_: f769b000 -> 00000000:00124000
  get Phys(data[n=1+3000]=f769c000)
AtapiVirtToPhysAddr_: f769c000 -> 00000000:00125000
  get Phys(data[n=1+4000]=f769d000)
AtapiVirtToPhysAddr_: f769d000 -> 00000000:00126000
  get Phys(data[n=1+5000]=f769e000)
AtapiVirtToPhysAddr_: f769e000 -> 00000000:00127000
  get Phys(data[n=1+6000]=f769f000)
AtapiVirtToPhysAddr_: f769f000 -> 00000000:00108000
  get Phys(data[n=2+1000]=f76a0000)
AtapiVirtToPhysAddr_: f76a0000 -> 00000000:00119000
  get Phys(data[n=3+1000]=f76a1000)
AtapiVirtToPhysAddr_: f76a1000 -> 00000000:0011a000
  get Phys(data[n=3+2000]=f76a2000)
AtapiVirtToPhysAddr_: f76a2000 -> 00000000:0011b000
  get Phys(data[n=3+3000]=f76a3000)
AtapiVirtToPhysAddr_: f76a3000 -> 00000000:0011c000
  get Phys(data[n=3+4000]=f76a4000)
AtapiVirtToPhysAddr_: f76a4000 -> 00000000:0011d000
  get Phys(data[n=3+5000]=f76a5000)
AtapiVirtToPhysAddr_: f76a5000 -> 00000000:0011e000
  get Phys(data[n=3+6000]=f76a6000)
AtapiVirtToPhysAddr_: f76a6000 -> 00000000:0011f000
  get Phys(data[n=3+7000]=f76a7000)
AtapiVirtToPhysAddr_: f76a7000 -> 00000000:007f8000
  get Phys(data[n=4+1000]=f76a8000)
AtapiVirtToPhysAddr_: f76a8000 -> 00000000:00111000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 5 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b239fe58 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b239fe28
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb239fe28, status 1
AtapiInterrupt: RequestComplete, srb 0xb239fe28
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb239fe28, CDB 0xb239fe58, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb239fe28
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b239fe58)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f7669000, count 10000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7669000)
AtapiVirtToPhysAddr_: f7669000 -> 00000000:00112000
  get Phys(data[n=1+1000]=f766a000)
AtapiVirtToPhysAddr_: f766a000 -> 00000000:00113000
  get Phys(data[n=1+2000]=f766b000)
AtapiVirtToPhysAddr_: f766b000 -> 00000000:00114000
  get Phys(data[n=1+3000]=f766c000)
AtapiVirtToPhysAddr_: f766c000 -> 00000000:00115000
  get Phys(data[n=1+4000]=f766d000)
AtapiVirtToPhysAddr_: f766d000 -> 00000000:00116000
  get Phys(data[n=1+5000]=f766e000)
AtapiVirtToPhysAddr_: f766e000 -> 00000000:00117000
  get Phys(data[n=1+6000]=f766f000)
AtapiVirtToPhysAddr_: f766f000 -> 00000000:007f0000
  get Phys(data[n=2+1000]=f7670000)
AtapiVirtToPhysAddr_: f7670000 -> 00000000:00109000
  get Phys(data[n=3+1000]=f7671000)
AtapiVirtToPhysAddr_: f7671000 -> 00000000:0010a000
  get Phys(data[n=3+2000]=f7672000)
AtapiVirtToPhysAddr_: f7672000 -> 00000000:0010b000
  get Phys(data[n=3+3000]=f7673000)
AtapiVirtToPhysAddr_: f7673000 -> 00000000:0010c000
  get Phys(data[n=3+4000]=f7674000)
AtapiVirtToPhysAddr_: f7674000 -> 00000000:0010d000
  get Phys(data[n=3+5000]=f7675000)
AtapiVirtToPhysAddr_: f7675000 -> 00000000:0010e000
  get Phys(data[n=3+6000]=f7676000)
AtapiVirtToPhysAddr_: f7676000 -> 00000000:0010f000
  get Phys(data[n=3+7000]=f7677000)
AtapiVirtToPhysAddr_: f7677000 -> 00000000:007e8000
  get Phys(data[n=4+1000]=f7678000)
AtapiVirtToPhysAddr_: f7678000 -> 00000000:007f9000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 5 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b239fe58 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b239fe28
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb239fe28, status 1
AtapiInterrupt: RequestComplete, srb 0xb239fe28
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb23a0240, CDB 0xb23a0270, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23a0240
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b23a0270)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f7679000, count 10000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7679000)
AtapiVirtToPhysAddr_: f7679000 -> 00000000:007fa000
  get Phys(data[n=1+1000]=f767a000)
AtapiVirtToPhysAddr_: f767a000 -> 00000000:007fb000
  get Phys(data[n=1+2000]=f767b000)
AtapiVirtToPhysAddr_: f767b000 -> 00000000:007fc000
  get Phys(data[n=1+3000]=f767c000)
AtapiVirtToPhysAddr_: f767c000 -> 00000000:007fd000
  get Phys(data[n=1+4000]=f767d000)
AtapiVirtToPhysAddr_: f767d000 -> 00000000:007fe000
  get Phys(data[n=1+5000]=f767e000)
AtapiVirtToPhysAddr_: f767e000 -> 00000000:00107000
  get Phys(data[n=2+1000]=f767f000)
AtapiVirtToPhysAddr_: f767f000 -> 00000000:007e0000
  get Phys(data[n=3+1000]=f7680000)
AtapiVirtToPhysAddr_: f7680000 -> 00000000:007f1000
  get Phys(data[n=4+1000]=f7681000)
AtapiVirtToPhysAddr_: f7681000 -> 00000000:007f2000
  get Phys(data[n=4+2000]=f7682000)
AtapiVirtToPhysAddr_: f7682000 -> 00000000:007f3000
  get Phys(data[n=4+3000]=f7683000)
AtapiVirtToPhysAddr_: f7683000 -> 00000000:007f4000
  get Phys(data[n=4+4000]=f7684000)
AtapiVirtToPhysAddr_: f7684000 -> 00000000:007f5000
  get Phys(data[n=4+5000]=f7685000)
AtapiVirtToPhysAddr_: f7685000 -> 00000000:007f6000
  get Phys(data[n=4+6000]=f7686000)
AtapiVirtToPhysAddr_: f7686000 -> 00000000:007ff000
  get Phys(data[n=5+1000]=f7687000)
AtapiVirtToPhysAddr_: f7687000 -> 00000000:00e18000
  get Phys(data[n=6+1000]=f7688000)
AtapiVirtToPhysAddr_: f7688000 -> 00000000:007e9000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 7 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b23a0270 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b23a0240
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23a0240, status 1
AtapiInterrupt: RequestComplete, srb 0xb23a0240
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb23a2928, CDB 0xb23a2958, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23a2928
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b23a2958)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f7689000, count 10000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7689000)
AtapiVirtToPhysAddr_: f7689000 -> 00000000:007ea000
  get Phys(data[n=1+1000]=f768a000)
AtapiVirtToPhysAddr_: f768a000 -> 00000000:007eb000
  get Phys(data[n=1+2000]=f768b000)
AtapiVirtToPhysAddr_: f768b000 -> 00000000:007ec000
  get Phys(data[n=1+3000]=f768c000)
AtapiVirtToPhysAddr_: f768c000 -> 00000000:007ed000
  get Phys(data[n=1+4000]=f768d000)
AtapiVirtToPhysAddr_: f768d000 -> 00000000:007ee000
  get Phys(data[n=1+5000]=f768e000)
AtapiVirtToPhysAddr_: f768e000 -> 00000000:007f7000
  get Phys(data[n=2+1000]=f768f000)
AtapiVirtToPhysAddr_: f768f000 -> 00000000:00e10000
  get Phys(data[n=3+1000]=f7690000)
AtapiVirtToPhysAddr_: f7690000 -> 00000000:007e1000
  get Phys(data[n=4+1000]=f7691000)
AtapiVirtToPhysAddr_: f7691000 -> 00000000:007e2000
  get Phys(data[n=4+2000]=f7692000)
AtapiVirtToPhysAddr_: f7692000 -> 00000000:007e3000
  get Phys(data[n=4+3000]=f7693000)
AtapiVirtToPhysAddr_: f7693000 -> 00000000:007e4000
  get Phys(data[n=4+4000]=f7694000)
AtapiVirtToPhysAddr_: f7694000 -> 00000000:007e5000
  get Phys(data[n=4+5000]=f7695000)
AtapiVirtToPhysAddr_: f7695000 -> 00000000:007e6000
  get Phys(data[n=4+6000]=f7696000)
AtapiVirtToPhysAddr_: f7696000 -> 00000000:007ef000
  get Phys(data[n=5+1000]=f7697000)
AtapiVirtToPhysAddr_: f7697000 -> 00000000:00e08000
  get Phys(data[n=6+1000]=f7698000)
AtapiVirtToPhysAddr_: f7698000 -> 00000000:00e19000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 7 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b23a2958 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b23a2928
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23a2928, status 1
AtapiInterrupt: RequestComplete, srb 0xb23a2928
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb2672180, CDB 0xb26721b0, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2672180
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b26721b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f7699000, count 10000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7699000)
AtapiVirtToPhysAddr_: f7699000 -> 00000000:007da000
  get Phys(data[n=1+1000]=f769a000)
AtapiVirtToPhysAddr_: f769a000 -> 00000000:007db000
  get Phys(data[n=1+2000]=f769b000)
AtapiVirtToPhysAddr_: f769b000 -> 00000000:007dc000
  get Phys(data[n=1+3000]=f769c000)
AtapiVirtToPhysAddr_: f769c000 -> 00000000:007dd000
  get Phys(data[n=1+4000]=f769d000)
AtapiVirtToPhysAddr_: f769d000 -> 00000000:007de000
  get Phys(data[n=1+5000]=f769e000)
AtapiVirtToPhysAddr_: f769e000 -> 00000000:007e7000
  get Phys(data[n=2+1000]=f769f000)
AtapiVirtToPhysAddr_: f769f000 -> 00000000:00e00000
  get Phys(data[n=3+1000]=f76a0000)
AtapiVirtToPhysAddr_: f76a0000 -> 00000000:00e11000
  get Phys(data[n=4+1000]=f76a1000)
AtapiVirtToPhysAddr_: f76a1000 -> 00000000:00e1a000
  get Phys(data[n=5+1000]=f76a2000)
AtapiVirtToPhysAddr_: f76a2000 -> 00000000:00e13000
  get Phys(data[n=6+1000]=f76a3000)
AtapiVirtToPhysAddr_: f76a3000 -> 00000000:00e14000
  get Phys(data[n=6+2000]=f76a4000)
AtapiVirtToPhysAddr_: f76a4000 -> 00000000:00e15000
  get Phys(data[n=6+3000]=f76a5000)
AtapiVirtToPhysAddr_: f76a5000 -> 00000000:00e16000
  get Phys(data[n=6+4000]=f76a6000)
AtapiVirtToPhysAddr_: f76a6000 -> 00000000:007df000
  get Phys(data[n=7+1000]=f76a7000)
AtapiVirtToPhysAddr_: f76a7000 -> 00000000:00df8000
  get Phys(data[n=8+1000]=f76a8000)
AtapiVirtToPhysAddr_: f76a8000 -> 00000000:00e09000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 9 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b26721b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b2672180
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2672180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2672180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(../ntoskrnl/io/iomgr/file.c:554) Using IopParseDevice() hack. Requested invalid attributes: 1
(../ntoskrnl/io/iomgr/file.c:554) Using IopParseDevice() hack. Requested invalid attributes: 1
(../ntoskrnl/io/iomgr/file.c:554) Using IopParseDevice() hack. Requested invalid attributes: 0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf77248f8, CDB 0xf7724928, AtaReq 0xb23fc000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf77248f8
TopLevel (3), AtaReq 0xb23fc000
Try ATAPI send 25
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f7724928)
  assume IN
AtapiSendCommand: zero/unaligned transfer 8, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 25
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f7724928 Command 0x25 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x8.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f77248f8
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x51
  base status 0x51
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x51)
AtapiInterrupt: iReason 3
AtapiInterrupt: Error 0x24
  Bad Lba 0x0
  wait 10 ready after ATAPI error
  Intr on DRQ 0
AtapiInterrupt: ATAPI Error, int reason 3
Errors in PIO mode
AtapiInterrupt: Error
AtapiInterrupt: CompleteRequest, srbstatus 4
AtapiInterrupt: Error. Begin mapping...
MapError: Error register is 0x24
ATAPI: Device not ready
AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xf77248f8, status 4
AtapiInterrupt: RequestComplete, srb 0xf77248f8
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb23a1550, CDB 0xb23a1580, AtaReq 0xb23fc000, SCmd 0x3
UniataNeedQueueing: TopLevel, qd=0
Send to device 3
TopLevel (2), srb 0xb23a1550
TopLevel (3), AtaReq 0xb23fc000
Try ATAPI send 3
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b23a1580)
  assume IN
AtapiSendCommand: SCSIOP_REQUEST_SENSE, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 3
AtapiSendCommand: SCSIOP_REQUEST_SENSE -> no dma setup (2)
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b23a1580 Command 0x3 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x51
  continue with SCSIOP_REQUEST_SENSE
AtapiSendCommand: Entry Status (0x51)
AtapiSendCommand: F:0x0, CntHL:0x0:0x12.
AtapiSendCommand: Poll for int. to send packet. Status (0x51)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b23a1550
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x12
IdeIntr: Read 0x9 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf76a79d0, srb->DataBuffer 0xf76a79d0
70 00 02 00 00 00 00 0a 00 00 00 00 3a 00 00 00 
00 00 
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf76a79e2, srb->DataBuffer 0xf76a79d0, len 0x12
   Transfered 12, full size 12
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xb23a1550, status 1
AtapiInterrupt: RequestComplete, srb 0xb23a1550
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
(../ntoskrnl/io/iomgr/file.c:554) Using IopParseDevice() hack. Requested invalid attributes: 0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb26732b0, CDB 0xb26732e0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb26732b0
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7724668
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76a8000, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76a8000)
AtapiVirtToPhysAddr_: f76a8000 -> 00000000:04c9c000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b26732b0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb26732b0, status 1
AtapiInterrupt: RequestComplete, srb 0xb26732b0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(../drivers/storage/class/disk/disk.c:2252) HACK: Handling partition 0 request!
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb26732b0, CDB 0xb26732e0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb26732b0
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77246d0
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76a8868, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76a8868)
AtapiVirtToPhysAddr_: f76a8868 -> 00000000:04c9e868
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b26732b0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb26732b0, status 1
AtapiInterrupt: RequestComplete, srb 0xb26732b0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb23a0c08, CDB 0xb23a0c38, AtaReq 0xb267d000, SCmd 0x0
UniataNeedQueueing: TopLevel, qd=0
Send to device 0
TopLevel (2), srb 0xb23a0c08
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 0
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b23a0c38)
  assume 0-transfer
AtapiSendCommand: zero/unaligned transfer 0, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 0
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiDmaReinit: set PIO mode on Device 0 (42 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
Intel 0
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b23a0c38 Command 0x0 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b23a0c08
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: wordCount 0x0, WordsTransfered 0x0
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0x0, srb->DataBuffer 0x0, len 0x0
   Transfered 0, full size 0
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23a0c08, status 1
AtapiInterrupt: RequestComplete, srb 0xb23a0c08
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb2672180, CDB 0xb26721b0, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2672180
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b26721b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0xc, data f7668000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7668000)
AtapiVirtToPhysAddr_: f7668000 -> 00000000:00df0000
  get Phys(data[n=1+1000]=f7669000)
AtapiVirtToPhysAddr_: f7669000 -> 00000000:00e01000
  get Phys(data[n=2+1000]=f766a000)
AtapiVirtToPhysAddr_: f766a000 -> 00000000:00e0a000
  get Phys(data[n=3+1000]=f766b000)
AtapiVirtToPhysAddr_: f766b000 -> 00000000:00e03000
  get Phys(data[n=4+1000]=f766c000)
AtapiVirtToPhysAddr_: f766c000 -> 00000000:00e04000
  get Phys(data[n=4+2000]=f766d000)
AtapiVirtToPhysAddr_: f766d000 -> 00000000:00e05000
  get Phys(data[n=4+3000]=f766e000)
AtapiVirtToPhysAddr_: f766e000 -> 00000000:00e06000
  get Phys(data[n=4+4000]=f766f000)
AtapiVirtToPhysAddr_: f766f000 -> 00000000:00e0f000
  get Phys(data[n=5+1000]=f7670000)
AtapiVirtToPhysAddr_: f7670000 -> 00000000:00de8000
  get Phys(data[n=6+1000]=f7671000)
AtapiVirtToPhysAddr_: f7671000 -> 00000000:00df9000
  get Phys(data[n=7+1000]=f7672000)
AtapiVirtToPhysAddr_: f7672000 -> 00000000:00e02000
  get Phys(data[n=8+1000]=f7673000)
AtapiVirtToPhysAddr_: f7673000 -> 00000000:00dfb000
  get Phys(data[n=9+1000]=f7674000)
AtapiVirtToPhysAddr_: f7674000 -> 00000000:00dfc000
  get Phys(data[n=9+2000]=f7675000)
AtapiVirtToPhysAddr_: f7675000 -> 00000000:00dfd000
  get Phys(data[n=9+3000]=f7676000)
AtapiVirtToPhysAddr_: f7676000 -> 00000000:00dfe000
  get Phys(data[n=9+4000]=f7677000)
AtapiVirtToPhysAddr_: f7677000 -> 00000000:00e07000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 10 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
Intel 0
AtaSetTransferMode: Set 0x42 on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x42 feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b26721b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x41, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b2672180
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  DmaTransfer + !BM_STATUS_INTR (1)
  getting status...
  status 0xc0
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2672180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2672180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb23a2928, CDB 0xb23a2958, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23a2928
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b23a2958)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f7678000, count 10000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7678000)
AtapiVirtToPhysAddr_: f7678000 -> 00000000:00de0000
  get Phys(data[n=1+1000]=f7679000)
AtapiVirtToPhysAddr_: f7679000 -> 00000000:00df1000
  get Phys(data[n=2+1000]=f767a000)
AtapiVirtToPhysAddr_: f767a000 -> 00000000:00dfa000
  get Phys(data[n=3+1000]=f767b000)
AtapiVirtToPhysAddr_: f767b000 -> 00000000:00df3000
  get Phys(data[n=4+1000]=f767c000)
AtapiVirtToPhysAddr_: f767c000 -> 00000000:00df4000
  get Phys(data[n=4+2000]=f767d000)
AtapiVirtToPhysAddr_: f767d000 -> 00000000:00df5000
  get Phys(data[n=4+3000]=f767e000)
AtapiVirtToPhysAddr_: f767e000 -> 00000000:00df6000
  get Phys(data[n=4+4000]=f767f000)
AtapiVirtToPhysAddr_: f767f000 -> 00000000:00dff000
  get Phys(data[n=5+1000]=f7680000)
AtapiVirtToPhysAddr_: f7680000 -> 00000000:00dd8000
  get Phys(data[n=6+1000]=f7681000)
AtapiVirtToPhysAddr_: f7681000 -> 00000000:00de9000
  get Phys(data[n=7+1000]=f7682000)
AtapiVirtToPhysAddr_: f7682000 -> 00000000:00df2000
  get Phys(data[n=8+1000]=f7683000)
AtapiVirtToPhysAddr_: f7683000 -> 00000000:00deb000
  get Phys(data[n=9+1000]=f7684000)
AtapiVirtToPhysAddr_: f7684000 -> 00000000:00dec000
  get Phys(data[n=9+2000]=f7685000)
AtapiVirtToPhysAddr_: f7685000 -> 00000000:00ded000
  get Phys(data[n=9+3000]=f7686000)
AtapiVirtToPhysAddr_: f7686000 -> 00000000:00dee000
  get Phys(data[n=9+4000]=f7687000)
AtapiVirtToPhysAddr_: f7687000 -> 00000000:00df7000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 10 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b23a2958 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b23a2928
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23a2928, status 1
AtapiInterrupt: RequestComplete, srb 0xb23a2928
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb23a0240, CDB 0xb23a0270, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23a0240
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b23a0270)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f7688000, count 10000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7688000)
AtapiVirtToPhysAddr_: f7688000 -> 00000000:00dd0000
  get Phys(data[n=1+1000]=f7689000)
AtapiVirtToPhysAddr_: f7689000 -> 00000000:00de1000
  get Phys(data[n=2+1000]=f768a000)
AtapiVirtToPhysAddr_: f768a000 -> 00000000:00dea000
  get Phys(data[n=3+1000]=f768b000)
AtapiVirtToPhysAddr_: f768b000 -> 00000000:00de3000
  get Phys(data[n=4+1000]=f768c000)
AtapiVirtToPhysAddr_: f768c000 -> 00000000:00de4000
  get Phys(data[n=4+2000]=f768d000)
AtapiVirtToPhysAddr_: f768d000 -> 00000000:00de5000
  get Phys(data[n=4+3000]=f768e000)
AtapiVirtToPhysAddr_: f768e000 -> 00000000:00de6000
  get Phys(data[n=4+4000]=f768f000)
AtapiVirtToPhysAddr_: f768f000 -> 00000000:00def000
  get Phys(data[n=5+1000]=f7690000)
AtapiVirtToPhysAddr_: f7690000 -> 00000000:00dc8000
  get Phys(data[n=6+1000]=f7691000)
AtapiVirtToPhysAddr_: f7691000 -> 00000000:00dd9000
  get Phys(data[n=7+1000]=f7692000)
AtapiVirtToPhysAddr_: f7692000 -> 00000000:00de2000
  get Phys(data[n=8+1000]=f7693000)
AtapiVirtToPhysAddr_: f7693000 -> 00000000:00ddb000
  get Phys(data[n=9+1000]=f7694000)
AtapiVirtToPhysAddr_: f7694000 -> 00000000:00ddc000
  get Phys(data[n=9+2000]=f7695000)
AtapiVirtToPhysAddr_: f7695000 -> 00000000:00ddd000
  get Phys(data[n=9+3000]=f7696000)
AtapiVirtToPhysAddr_: f7696000 -> 00000000:00dde000
  get Phys(data[n=9+4000]=f7697000)
AtapiVirtToPhysAddr_: f7697000 -> 00000000:00de7000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 10 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b23a0270 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b23a0240
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23a0240, status 1
AtapiInterrupt: RequestComplete, srb 0xb23a0240
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb239fe28, CDB 0xb239fe58, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb239fe28
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b239fe58)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f7698000, count 10000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7698000)
AtapiVirtToPhysAddr_: f7698000 -> 00000000:00dc0000
  get Phys(data[n=1+1000]=f7699000)
AtapiVirtToPhysAddr_: f7699000 -> 00000000:00dd1000
  get Phys(data[n=2+1000]=f769a000)
AtapiVirtToPhysAddr_: f769a000 -> 00000000:00dda000
  get Phys(data[n=3+1000]=f769b000)
AtapiVirtToPhysAddr_: f769b000 -> 00000000:00dd3000
  get Phys(data[n=4+1000]=f769c000)
AtapiVirtToPhysAddr_: f769c000 -> 00000000:00dd4000
  get Phys(data[n=4+2000]=f769d000)
AtapiVirtToPhysAddr_: f769d000 -> 00000000:00dd5000
  get Phys(data[n=4+3000]=f769e000)
AtapiVirtToPhysAddr_: f769e000 -> 00000000:00dd6000
  get Phys(data[n=4+4000]=f769f000)
AtapiVirtToPhysAddr_: f769f000 -> 00000000:00ddf000
  get Phys(data[n=5+1000]=f76a0000)
AtapiVirtToPhysAddr_: f76a0000 -> 00000000:00db8000
  get Phys(data[n=6+1000]=f76a1000)
AtapiVirtToPhysAddr_: f76a1000 -> 00000000:00dc9000
  get Phys(data[n=7+1000]=f76a2000)
AtapiVirtToPhysAddr_: f76a2000 -> 00000000:00dd2000
  get Phys(data[n=8+1000]=f76a3000)
AtapiVirtToPhysAddr_: f76a3000 -> 00000000:00dcb000
  get Phys(data[n=9+1000]=f76a4000)
AtapiVirtToPhysAddr_: f76a4000 -> 00000000:00dcc000
  get Phys(data[n=9+2000]=f76a5000)
AtapiVirtToPhysAddr_: f76a5000 -> 00000000:00dcd000
  get Phys(data[n=9+3000]=f76a6000)
AtapiVirtToPhysAddr_: f76a6000 -> 00000000:00dce000
  get Phys(data[n=9+4000]=f76a7000)
AtapiVirtToPhysAddr_: f76a7000 -> 00000000:00dd7000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 10 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b239fe58 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b239fe28
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb239fe28, status 1
AtapiInterrupt: RequestComplete, srb 0xb239fe28
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb239fe28, CDB 0xb239fe58, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb239fe28
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b239fe58)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f76a5000, count 2000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f76a5000)
AtapiVirtToPhysAddr_: f76a5000 -> 00000000:00db0000
  get Phys(data[n=1+1000]=f76a6000)
AtapiVirtToPhysAddr_: f76a6000 -> 00000000:00dc1000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 2 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b239fe58 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x20:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b239fe28
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb239fe28, status 1
AtapiInterrupt: RequestComplete, srb 0xb239fe28
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb239fe28, CDB 0xb239fe58, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb239fe28
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b239fe58)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f7669000, count 10000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7669000)
AtapiVirtToPhysAddr_: f7669000 -> 00000000:00dc5000
  get Phys(data[n=1+1000]=f766a000)
AtapiVirtToPhysAddr_: f766a000 -> 00000000:00dc6000
  get Phys(data[n=1+2000]=f766b000)
AtapiVirtToPhysAddr_: f766b000 -> 00000000:00dcf000
  get Phys(data[n=2+1000]=f766c000)
AtapiVirtToPhysAddr_: f766c000 -> 00000000:00da8000
  get Phys(data[n=3+1000]=f766d000)
AtapiVirtToPhysAddr_: f766d000 -> 00000000:00db9000
  get Phys(data[n=4+1000]=f766e000)
AtapiVirtToPhysAddr_: f766e000 -> 00000000:00dba000
  get Phys(data[n=4+2000]=f766f000)
AtapiVirtToPhysAddr_: f766f000 -> 00000000:00db3000
  get Phys(data[n=5+1000]=f7670000)
AtapiVirtToPhysAddr_: f7670000 -> 00000000:00dbc000
  get Phys(data[n=6+1000]=f7671000)
AtapiVirtToPhysAddr_: f7671000 -> 00000000:00dbd000
  get Phys(data[n=6+2000]=f7672000)
AtapiVirtToPhysAddr_: f7672000 -> 00000000:00dbe000
  get Phys(data[n=6+3000]=f7673000)
AtapiVirtToPhysAddr_: f7673000 -> 00000000:00dc7000
  get Phys(data[n=7+1000]=f7674000)
AtapiVirtToPhysAddr_: f7674000 -> 00000000:00da0000
  get Phys(data[n=8+1000]=f7675000)
AtapiVirtToPhysAddr_: f7675000 -> 00000000:00db1000
  get Phys(data[n=9+1000]=f7676000)
AtapiVirtToPhysAddr_: f7676000 -> 00000000:00db2000
  get Phys(data[n=9+2000]=f7677000)
AtapiVirtToPhysAddr_: f7677000 -> 00000000:00dab000
  get Phys(data[n=10+1000]=f7678000)
AtapiVirtToPhysAddr_: f7678000 -> 00000000:00db4000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 11 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b239fe58 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b239fe28
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb239fe28, status 1
AtapiInterrupt: RequestComplete, srb 0xb239fe28
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb23a0240, CDB 0xb23a0270, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23a0240
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b23a0270)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f7679000, count 10000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7679000)
AtapiVirtToPhysAddr_: f7679000 -> 00000000:00db5000
  get Phys(data[n=1+1000]=f767a000)
AtapiVirtToPhysAddr_: f767a000 -> 00000000:00db6000
  get Phys(data[n=1+2000]=f767b000)
AtapiVirtToPhysAddr_: f767b000 -> 00000000:00dbf000
  get Phys(data[n=2+1000]=f767c000)
AtapiVirtToPhysAddr_: f767c000 -> 00000000:00d98000
  get Phys(data[n=3+1000]=f767d000)
AtapiVirtToPhysAddr_: f767d000 -> 00000000:00da9000
  get Phys(data[n=4+1000]=f767e000)
AtapiVirtToPhysAddr_: f767e000 -> 00000000:00daa000
  get Phys(data[n=4+2000]=f767f000)
AtapiVirtToPhysAddr_: f767f000 -> 00000000:00da3000
  get Phys(data[n=5+1000]=f7680000)
AtapiVirtToPhysAddr_: f7680000 -> 00000000:00dac000
  get Phys(data[n=6+1000]=f7681000)
AtapiVirtToPhysAddr_: f7681000 -> 00000000:00dad000
  get Phys(data[n=6+2000]=f7682000)
AtapiVirtToPhysAddr_: f7682000 -> 00000000:00dae000
  get Phys(data[n=6+3000]=f7683000)
AtapiVirtToPhysAddr_: f7683000 -> 00000000:00db7000
  get Phys(data[n=7+1000]=f7684000)
AtapiVirtToPhysAddr_: f7684000 -> 00000000:00d90000
  get Phys(data[n=8+1000]=f7685000)
AtapiVirtToPhysAddr_: f7685000 -> 00000000:00da1000
  get Phys(data[n=9+1000]=f7686000)
AtapiVirtToPhysAddr_: f7686000 -> 00000000:00da2000
  get Phys(data[n=9+2000]=f7687000)
AtapiVirtToPhysAddr_: f7687000 -> 00000000:00d9b000
  get Phys(data[n=10+1000]=f7688000)
AtapiVirtToPhysAddr_: f7688000 -> 00000000:00da4000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 11 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b23a0270 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b23a0240
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23a0240, status 1
AtapiInterrupt: RequestComplete, srb 0xb23a0240
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb23a2928, CDB 0xb23a2958, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23a2928
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b23a2958)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f7689000, count 10000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7689000)
AtapiVirtToPhysAddr_: f7689000 -> 00000000:00da5000
  get Phys(data[n=1+1000]=f768a000)
AtapiVirtToPhysAddr_: f768a000 -> 00000000:00da6000
  get Phys(data[n=1+2000]=f768b000)
AtapiVirtToPhysAddr_: f768b000 -> 00000000:00daf000
  get Phys(data[n=2+1000]=f768c000)
AtapiVirtToPhysAddr_: f768c000 -> 00000000:00d88000
  get Phys(data[n=3+1000]=f768d000)
AtapiVirtToPhysAddr_: f768d000 -> 00000000:00d99000
  get Phys(data[n=4+1000]=f768e000)
AtapiVirtToPhysAddr_: f768e000 -> 00000000:00d9a000
  get Phys(data[n=4+2000]=f768f000)
AtapiVirtToPhysAddr_: f768f000 -> 00000000:00d93000
  get Phys(data[n=5+1000]=f7690000)
AtapiVirtToPhysAddr_: f7690000 -> 00000000:00d9c000
  get Phys(data[n=6+1000]=f7691000)
AtapiVirtToPhysAddr_: f7691000 -> 00000000:00d9d000
  get Phys(data[n=6+2000]=f7692000)
AtapiVirtToPhysAddr_: f7692000 -> 00000000:00d9e000
  get Phys(data[n=6+3000]=f7693000)
AtapiVirtToPhysAddr_: f7693000 -> 00000000:00da7000
  get Phys(data[n=7+1000]=f7694000)
AtapiVirtToPhysAddr_: f7694000 -> 00000000:00d80000
  get Phys(data[n=8+1000]=f7695000)
AtapiVirtToPhysAddr_: f7695000 -> 00000000:00d91000
  get Phys(data[n=9+1000]=f7696000)
AtapiVirtToPhysAddr_: f7696000 -> 00000000:00d92000
  get Phys(data[n=9+2000]=f7697000)
AtapiVirtToPhysAddr_: f7697000 -> 00000000:00d8b000
  get Phys(data[n=10+1000]=f7698000)
AtapiVirtToPhysAddr_: f7698000 -> 00000000:00d94000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 11 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b23a2958 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b23a2928
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23a2928, status 1
AtapiInterrupt: RequestComplete, srb 0xb23a2928
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb2672180, CDB 0xb26721b0, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2672180
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b26721b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f7699000, count 10000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7699000)
AtapiVirtToPhysAddr_: f7699000 -> 00000000:00d95000
  get Phys(data[n=1+1000]=f769a000)
AtapiVirtToPhysAddr_: f769a000 -> 00000000:00d96000
  get Phys(data[n=1+2000]=f769b000)
AtapiVirtToPhysAddr_: f769b000 -> 00000000:00d9f000
  get Phys(data[n=2+1000]=f769c000)
AtapiVirtToPhysAddr_: f769c000 -> 00000000:00d78000
  get Phys(data[n=3+1000]=f769d000)
AtapiVirtToPhysAddr_: f769d000 -> 00000000:00d89000
  get Phys(data[n=4+1000]=f769e000)
AtapiVirtToPhysAddr_: f769e000 -> 00000000:00d8a000
  get Phys(data[n=4+2000]=f769f000)
AtapiVirtToPhysAddr_: f769f000 -> 00000000:00d83000
  get Phys(data[n=5+1000]=f76a0000)
AtapiVirtToPhysAddr_: f76a0000 -> 00000000:00d8c000
  get Phys(data[n=6+1000]=f76a1000)
AtapiVirtToPhysAddr_: f76a1000 -> 00000000:00d8d000
  get Phys(data[n=6+2000]=f76a2000)
AtapiVirtToPhysAddr_: f76a2000 -> 00000000:00d8e000
  get Phys(data[n=6+3000]=f76a3000)
AtapiVirtToPhysAddr_: f76a3000 -> 00000000:00d97000
  get Phys(data[n=7+1000]=f76a4000)
AtapiVirtToPhysAddr_: f76a4000 -> 00000000:00d70000
  get Phys(data[n=8+1000]=f76a5000)
AtapiVirtToPhysAddr_: f76a5000 -> 00000000:00d81000
  get Phys(data[n=9+1000]=f76a6000)
AtapiVirtToPhysAddr_: f76a6000 -> 00000000:00d82000
  get Phys(data[n=9+2000]=f76a7000)
AtapiVirtToPhysAddr_: f76a7000 -> 00000000:00d7b000
  get Phys(data[n=10+1000]=f76a8000)
AtapiVirtToPhysAddr_: f76a8000 -> 00000000:00d84000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 11 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b26721b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b2672180
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2672180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2672180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb239eb68, CDB 0xb239eb98, AtaReq 0xb267d000, SCmd 0x0
UniataNeedQueueing: TopLevel, qd=0
Send to device 0
TopLevel (2), srb 0xb239eb68
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 0
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b239eb98)
  assume 0-transfer
AtapiSendCommand: zero/unaligned transfer 0, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 0
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiDmaReinit: set PIO mode on Device 0 (42 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
Intel 0
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b239eb98 Command 0x0 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b239eb68
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: wordCount 0x0, WordsTransfered 0x0
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0x0, srb->DataBuffer 0x0, len 0x0
   Transfered 0, full size 0
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb239eb68, status 1
AtapiInterrupt: RequestComplete, srb 0xb239eb68
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb2672180, CDB 0xb26721b0, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2672180
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b26721b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0xc, data f7664000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7664000)
AtapiVirtToPhysAddr_: f7664000 -> 00000000:00d75000
  get Phys(data[n=1+1000]=f7665000)
AtapiVirtToPhysAddr_: f7665000 -> 00000000:00d7e000
  get Phys(data[n=2+1000]=f7666000)
AtapiVirtToPhysAddr_: f7666000 -> 00000000:00d87000
  get Phys(data[n=3+1000]=f7667000)
AtapiVirtToPhysAddr_: f7667000 -> 00000000:00d60000
  get Phys(data[n=4+1000]=f7668000)
AtapiVirtToPhysAddr_: f7668000 -> 00000000:00d71000
  get Phys(data[n=5+1000]=f7669000)
AtapiVirtToPhysAddr_: f7669000 -> 00000000:00d72000
  get Phys(data[n=5+2000]=f766a000)
AtapiVirtToPhysAddr_: f766a000 -> 00000000:00d6b000
  get Phys(data[n=6+1000]=f766b000)
AtapiVirtToPhysAddr_: f766b000 -> 00000000:00d6c000
  get Phys(data[n=6+2000]=f766c000)
AtapiVirtToPhysAddr_: f766c000 -> 00000000:00d6d000
  get Phys(data[n=6+3000]=f766d000)
AtapiVirtToPhysAddr_: f766d000 -> 00000000:00d76000
  get Phys(data[n=7+1000]=f766e000)
AtapiVirtToPhysAddr_: f766e000 -> 00000000:00d7f000
  get Phys(data[n=8+1000]=f766f000)
AtapiVirtToPhysAddr_: f766f000 -> 00000000:00d58000
  get Phys(data[n=9+1000]=f7670000)
AtapiVirtToPhysAddr_: f7670000 -> 00000000:00d69000
  get Phys(data[n=10+1000]=f7671000)
AtapiVirtToPhysAddr_: f7671000 -> 00000000:00d6a000
  get Phys(data[n=10+2000]=f7672000)
AtapiVirtToPhysAddr_: f7672000 -> 00000000:00d63000
  get Phys(data[n=11+1000]=f7673000)
AtapiVirtToPhysAddr_: f7673000 -> 00000000:00d64000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 11 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
Intel 0
AtaSetTransferMode: Set 0x42 on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x42 feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b26721b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x41, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b2672180
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  DmaTransfer + !BM_STATUS_INTR (1)
  getting status...
  status 0xc0
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2672180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2672180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb23a2928, CDB 0xb23a2958, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23a2928
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b23a2958)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f7674000, count 10000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7674000)
AtapiVirtToPhysAddr_: f7674000 -> 00000000:00d65000
  get Phys(data[n=1+1000]=f7675000)
AtapiVirtToPhysAddr_: f7675000 -> 00000000:00d6e000
  get Phys(data[n=2+1000]=f7676000)
AtapiVirtToPhysAddr_: f7676000 -> 00000000:00d77000
  get Phys(data[n=3+1000]=f7677000)
AtapiVirtToPhysAddr_: f7677000 -> 00000000:00d50000
  get Phys(data[n=4+1000]=f7678000)
AtapiVirtToPhysAddr_: f7678000 -> 00000000:00d61000
  get Phys(data[n=5+1000]=f7679000)
AtapiVirtToPhysAddr_: f7679000 -> 00000000:00d62000
  get Phys(data[n=5+2000]=f767a000)
AtapiVirtToPhysAddr_: f767a000 -> 00000000:00d5b000
  get Phys(data[n=6+1000]=f767b000)
AtapiVirtToPhysAddr_: f767b000 -> 00000000:00d5c000
  get Phys(data[n=6+2000]=f767c000)
AtapiVirtToPhysAddr_: f767c000 -> 00000000:00d5d000
  get Phys(data[n=6+3000]=f767d000)
AtapiVirtToPhysAddr_: f767d000 -> 00000000:00d66000
  get Phys(data[n=7+1000]=f767e000)
AtapiVirtToPhysAddr_: f767e000 -> 00000000:00d6f000
  get Phys(data[n=8+1000]=f767f000)
AtapiVirtToPhysAddr_: f767f000 -> 00000000:00d48000
  get Phys(data[n=9+1000]=f7680000)
AtapiVirtToPhysAddr_: f7680000 -> 00000000:00d59000
  get Phys(data[n=10+1000]=f7681000)
AtapiVirtToPhysAddr_: f7681000 -> 00000000:00d5a000
  get Phys(data[n=10+2000]=f7682000)
AtapiVirtToPhysAddr_: f7682000 -> 00000000:00d53000
  get Phys(data[n=11+1000]=f7683000)
AtapiVirtToPhysAddr_: f7683000 -> 00000000:00d54000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 11 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b23a2958 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b23a2928
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23a2928, status 1
AtapiInterrupt: RequestComplete, srb 0xb23a2928
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb23a0240, CDB 0xb23a0270, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23a0240
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b23a0270)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f7684000, count 10000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7684000)
AtapiVirtToPhysAddr_: f7684000 -> 00000000:00d55000
  get Phys(data[n=1+1000]=f7685000)
AtapiVirtToPhysAddr_: f7685000 -> 00000000:00d5e000
  get Phys(data[n=2+1000]=f7686000)
AtapiVirtToPhysAddr_: f7686000 -> 00000000:00d67000
  get Phys(data[n=3+1000]=f7687000)
AtapiVirtToPhysAddr_: f7687000 -> 00000000:00d40000
  get Phys(data[n=4+1000]=f7688000)
AtapiVirtToPhysAddr_: f7688000 -> 00000000:00d51000
  get Phys(data[n=5+1000]=f7689000)
AtapiVirtToPhysAddr_: f7689000 -> 00000000:00d52000
  get Phys(data[n=5+2000]=f768a000)
AtapiVirtToPhysAddr_: f768a000 -> 00000000:00d4b000
  get Phys(data[n=6+1000]=f768b000)
AtapiVirtToPhysAddr_: f768b000 -> 00000000:00d4c000
  get Phys(data[n=6+2000]=f768c000)
AtapiVirtToPhysAddr_: f768c000 -> 00000000:00d4d000
  get Phys(data[n=6+3000]=f768d000)
AtapiVirtToPhysAddr_: f768d000 -> 00000000:00d56000
  get Phys(data[n=7+1000]=f768e000)
AtapiVirtToPhysAddr_: f768e000 -> 00000000:00d5f000
  get Phys(data[n=8+1000]=f768f000)
AtapiVirtToPhysAddr_: f768f000 -> 00000000:00d38000
  get Phys(data[n=9+1000]=f7690000)
AtapiVirtToPhysAddr_: f7690000 -> 00000000:00d49000
  get Phys(data[n=10+1000]=f7691000)
AtapiVirtToPhysAddr_: f7691000 -> 00000000:00d4a000
  get Phys(data[n=10+2000]=f7692000)
AtapiVirtToPhysAddr_: f7692000 -> 00000000:00d43000
  get Phys(data[n=11+1000]=f7693000)
AtapiVirtToPhysAddr_: f7693000 -> 00000000:00d44000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 11 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b23a0270 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b23a0240
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23a0240, status 1
AtapiInterrupt: RequestComplete, srb 0xb23a0240
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb239fe28, CDB 0xb239fe58, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb239fe28
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b239fe58)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f7694000, count 10000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7694000)
AtapiVirtToPhysAddr_: f7694000 -> 00000000:00d45000
  get Phys(data[n=1+1000]=f7695000)
AtapiVirtToPhysAddr_: f7695000 -> 00000000:00d4e000
  get Phys(data[n=2+1000]=f7696000)
AtapiVirtToPhysAddr_: f7696000 -> 00000000:00d57000
  get Phys(data[n=3+1000]=f7697000)
AtapiVirtToPhysAddr_: f7697000 -> 00000000:00d30000
  get Phys(data[n=4+1000]=f7698000)
AtapiVirtToPhysAddr_: f7698000 -> 00000000:00d41000
  get Phys(data[n=5+1000]=f7699000)
AtapiVirtToPhysAddr_: f7699000 -> 00000000:00d42000
  get Phys(data[n=5+2000]=f769a000)
AtapiVirtToPhysAddr_: f769a000 -> 00000000:00d3b000
  get Phys(data[n=6+1000]=f769b000)
AtapiVirtToPhysAddr_: f769b000 -> 00000000:00d3c000
  get Phys(data[n=6+2000]=f769c000)
AtapiVirtToPhysAddr_: f769c000 -> 00000000:00d3d000
  get Phys(data[n=6+3000]=f769d000)
AtapiVirtToPhysAddr_: f769d000 -> 00000000:00d46000
  get Phys(data[n=7+1000]=f769e000)
AtapiVirtToPhysAddr_: f769e000 -> 00000000:00d4f000
  get Phys(data[n=8+1000]=f769f000)
AtapiVirtToPhysAddr_: f769f000 -> 00000000:00d28000
  get Phys(data[n=9+1000]=f76a0000)
AtapiVirtToPhysAddr_: f76a0000 -> 00000000:00d39000
  get Phys(data[n=10+1000]=f76a1000)
AtapiVirtToPhysAddr_: f76a1000 -> 00000000:00d3a000
  get Phys(data[n=10+2000]=f76a2000)
AtapiVirtToPhysAddr_: f76a2000 -> 00000000:00d33000
  get Phys(data[n=11+1000]=f76a3000)
AtapiVirtToPhysAddr_: f76a3000 -> 00000000:00d34000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 11 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b239fe58 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b239fe28
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb239fe28, status 1
AtapiInterrupt: RequestComplete, srb 0xb239fe28
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb239fe28, CDB 0xb239fe58, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb239fe28
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b239fe58)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f76a1000, count 2000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f76a1000)
AtapiVirtToPhysAddr_: f76a1000 -> 00000000:00d35000
  get Phys(data[n=1+1000]=f76a2000)
AtapiVirtToPhysAddr_: f76a2000 -> 00000000:00d3e000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 2 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b239fe58 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x20:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b239fe28
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb239fe28, status 1
AtapiInterrupt: RequestComplete, srb 0xb239fe28
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb239fe28, CDB 0xb239fe58, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb239fe28
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b239fe58)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f7660000, count 10000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7660000)
AtapiVirtToPhysAddr_: f7660000 -> 00000000:00fe2000
  get Phys(data[n=1+1000]=f7661000)
AtapiVirtToPhysAddr_: f7661000 -> 00000000:00fd3000
  get Phys(data[n=2+1000]=f7662000)
AtapiVirtToPhysAddr_: f7662000 -> 00000000:00fdc000
  get Phys(data[n=3+1000]=f7663000)
AtapiVirtToPhysAddr_: f7663000 -> 00000000:00fdd000
  get Phys(data[n=3+2000]=f7664000)
AtapiVirtToPhysAddr_: f7664000 -> 00000000:00fe6000
  get Phys(data[n=4+1000]=f7665000)
AtapiVirtToPhysAddr_: f7665000 -> 00000000:00fe7000
  get Phys(data[n=4+2000]=f7666000)
AtapiVirtToPhysAddr_: f7666000 -> 00000000:00fc8000
  get Phys(data[n=5+1000]=f7667000)
AtapiVirtToPhysAddr_: f7667000 -> 00000000:00fd9000
  get Phys(data[n=6+1000]=f7668000)
AtapiVirtToPhysAddr_: f7668000 -> 00000000:00fda000
  get Phys(data[n=6+2000]=f7669000)
AtapiVirtToPhysAddr_: f7669000 -> 00000000:00fcb000
  get Phys(data[n=7+1000]=f766a000)
AtapiVirtToPhysAddr_: f766a000 -> 00000000:00fd4000
  get Phys(data[n=8+1000]=f766b000)
AtapiVirtToPhysAddr_: f766b000 -> 00000000:00fd5000
  get Phys(data[n=8+2000]=f766c000)
AtapiVirtToPhysAddr_: f766c000 -> 00000000:00fde000
  get Phys(data[n=9+1000]=f766d000)
AtapiVirtToPhysAddr_: f766d000 -> 00000000:00fdf000
  get Phys(data[n=9+2000]=f766e000)
AtapiVirtToPhysAddr_: f766e000 -> 00000000:00fc0000
  get Phys(data[n=10+1000]=f766f000)
AtapiVirtToPhysAddr_: f766f000 -> 00000000:00fd1000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 11 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b239fe58 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b239fe28
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb239fe28, status 1
AtapiInterrupt: RequestComplete, srb 0xb239fe28
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb23a0240, CDB 0xb23a0270, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23a0240
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b23a0270)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f7670000, count 10000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7670000)
AtapiVirtToPhysAddr_: f7670000 -> 00000000:00fd2000
  get Phys(data[n=1+1000]=f7671000)
AtapiVirtToPhysAddr_: f7671000 -> 00000000:00fc3000
  get Phys(data[n=2+1000]=f7672000)
AtapiVirtToPhysAddr_: f7672000 -> 00000000:00fcc000
  get Phys(data[n=3+1000]=f7673000)
AtapiVirtToPhysAddr_: f7673000 -> 00000000:00fcd000
  get Phys(data[n=3+2000]=f7674000)
AtapiVirtToPhysAddr_: f7674000 -> 00000000:00fd6000
  get Phys(data[n=4+1000]=f7675000)
AtapiVirtToPhysAddr_: f7675000 -> 00000000:00fd7000
  get Phys(data[n=4+2000]=f7676000)
AtapiVirtToPhysAddr_: f7676000 -> 00000000:00fb8000
  get Phys(data[n=5+1000]=f7677000)
AtapiVirtToPhysAddr_: f7677000 -> 00000000:00fc9000
  get Phys(data[n=6+1000]=f7678000)
AtapiVirtToPhysAddr_: f7678000 -> 00000000:00fca000
  get Phys(data[n=6+2000]=f7679000)
AtapiVirtToPhysAddr_: f7679000 -> 00000000:00fbb000
  get Phys(data[n=7+1000]=f767a000)
AtapiVirtToPhysAddr_: f767a000 -> 00000000:00fc4000
  get Phys(data[n=8+1000]=f767b000)
AtapiVirtToPhysAddr_: f767b000 -> 00000000:00fc5000
  get Phys(data[n=8+2000]=f767c000)
AtapiVirtToPhysAddr_: f767c000 -> 00000000:00fce000
  get Phys(data[n=9+1000]=f767d000)
AtapiVirtToPhysAddr_: f767d000 -> 00000000:00fcf000
  get Phys(data[n=9+2000]=f767e000)
AtapiVirtToPhysAddr_: f767e000 -> 00000000:00fb0000
  get Phys(data[n=10+1000]=f767f000)
AtapiVirtToPhysAddr_: f767f000 -> 00000000:00fc1000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 11 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b23a0270 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b23a0240
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23a0240, status 1
AtapiInterrupt: RequestComplete, srb 0xb23a0240
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb23a2928, CDB 0xb23a2958, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23a2928
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b23a2958)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f7680000, count 10000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7680000)
AtapiVirtToPhysAddr_: f7680000 -> 00000000:00fc2000
  get Phys(data[n=1+1000]=f7681000)
AtapiVirtToPhysAddr_: f7681000 -> 00000000:00fb3000
  get Phys(data[n=2+1000]=f7682000)
AtapiVirtToPhysAddr_: f7682000 -> 00000000:00fbc000
  get Phys(data[n=3+1000]=f7683000)
AtapiVirtToPhysAddr_: f7683000 -> 00000000:00fbd000
  get Phys(data[n=3+2000]=f7684000)
AtapiVirtToPhysAddr_: f7684000 -> 00000000:00fc6000
  get Phys(data[n=4+1000]=f7685000)
AtapiVirtToPhysAddr_: f7685000 -> 00000000:00fc7000
  get Phys(data[n=4+2000]=f7686000)
AtapiVirtToPhysAddr_: f7686000 -> 00000000:00fa8000
  get Phys(data[n=5+1000]=f7687000)
AtapiVirtToPhysAddr_: f7687000 -> 00000000:00fb9000
  get Phys(data[n=6+1000]=f7688000)
AtapiVirtToPhysAddr_: f7688000 -> 00000000:00fba000
  get Phys(data[n=6+2000]=f7689000)
AtapiVirtToPhysAddr_: f7689000 -> 00000000:00fab000
  get Phys(data[n=7+1000]=f768a000)
AtapiVirtToPhysAddr_: f768a000 -> 00000000:00fb4000
  get Phys(data[n=8+1000]=f768b000)
AtapiVirtToPhysAddr_: f768b000 -> 00000000:00fb5000
  get Phys(data[n=8+2000]=f768c000)
AtapiVirtToPhysAddr_: f768c000 -> 00000000:00fbe000
  get Phys(data[n=9+1000]=f768d000)
AtapiVirtToPhysAddr_: f768d000 -> 00000000:00fbf000
  get Phys(data[n=9+2000]=f768e000)
AtapiVirtToPhysAddr_: f768e000 -> 00000000:00fa0000
  get Phys(data[n=10+1000]=f768f000)
AtapiVirtToPhysAddr_: f768f000 -> 00000000:00fb1000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 11 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b23a2958 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b23a2928
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23a2928, status 1
AtapiInterrupt: RequestComplete, srb 0xb23a2928
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb2672180, CDB 0xb26721b0, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2672180
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b26721b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f7690000, count 10000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7690000)
AtapiVirtToPhysAddr_: f7690000 -> 00000000:00fb2000
  get Phys(data[n=1+1000]=f7691000)
AtapiVirtToPhysAddr_: f7691000 -> 00000000:00fa3000
  get Phys(data[n=2+1000]=f7692000)
AtapiVirtToPhysAddr_: f7692000 -> 00000000:00fac000
  get Phys(data[n=3+1000]=f7693000)
AtapiVirtToPhysAddr_: f7693000 -> 00000000:00fad000
  get Phys(data[n=3+2000]=f7694000)
AtapiVirtToPhysAddr_: f7694000 -> 00000000:00fb6000
  get Phys(data[n=4+1000]=f7695000)
AtapiVirtToPhysAddr_: f7695000 -> 00000000:00fb7000
  get Phys(data[n=4+2000]=f7696000)
AtapiVirtToPhysAddr_: f7696000 -> 00000000:00f98000
  get Phys(data[n=5+1000]=f7697000)
AtapiVirtToPhysAddr_: f7697000 -> 00000000:00fa9000
  get Phys(data[n=6+1000]=f7698000)
AtapiVirtToPhysAddr_: f7698000 -> 00000000:00faa000
  get Phys(data[n=6+2000]=f7699000)
AtapiVirtToPhysAddr_: f7699000 -> 00000000:00f9b000
  get Phys(data[n=7+1000]=f769a000)
AtapiVirtToPhysAddr_: f769a000 -> 00000000:00fa4000
  get Phys(data[n=8+1000]=f769b000)
AtapiVirtToPhysAddr_: f769b000 -> 00000000:00fa5000
  get Phys(data[n=8+2000]=f769c000)
AtapiVirtToPhysAddr_: f769c000 -> 00000000:00fae000
  get Phys(data[n=9+1000]=f769d000)
AtapiVirtToPhysAddr_: f769d000 -> 00000000:00faf000
  get Phys(data[n=9+2000]=f769e000)
AtapiVirtToPhysAddr_: f769e000 -> 00000000:00f90000
  get Phys(data[n=10+1000]=f769f000)
AtapiVirtToPhysAddr_: f769f000 -> 00000000:00fa1000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 11 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b26721b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b2672180
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2672180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2672180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb239eb68, CDB 0xb239eb98, AtaReq 0xb267d000, SCmd 0x0
UniataNeedQueueing: TopLevel, qd=0
Send to device 0
TopLevel (2), srb 0xb239eb68
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 0
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b239eb98)
  assume 0-transfer
AtapiSendCommand: zero/unaligned transfer 0, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 0
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiDmaReinit: set PIO mode on Device 0 (42 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
Intel 0
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b239eb98 Command 0x0 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b239eb68
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: wordCount 0x0, WordsTransfered 0x0
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0x0, srb->DataBuffer 0x0, len 0x0
   Transfered 0, full size 0
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb239eb68, status 1
AtapiInterrupt: RequestComplete, srb 0xb239eb68
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb239eb68, CDB 0xb239eb98, AtaReq 0xb267d000, SCmd 0x0
UniataNeedQueueing: TopLevel, qd=0
Send to device 0
TopLevel (2), srb 0xb239eb68
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 0
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b239eb98)
  assume 0-transfer
AtapiSendCommand: zero/unaligned transfer 0, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 0
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b239eb98 Command 0x0 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b239eb68
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: wordCount 0x0, WordsTransfered 0x0
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0x0, srb->DataBuffer 0x0, len 0x0
   Transfered 0, full size 0
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb239eb68, status 1
AtapiInterrupt: RequestComplete, srb 0xb239eb68
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb2672180, CDB 0xb26721b0, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2672180
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b26721b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0xc, data f765c000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f765c000)
AtapiVirtToPhysAddr_: f765c000 -> 00000000:00f85000
  get Phys(data[n=1+1000]=f765d000)
AtapiVirtToPhysAddr_: f765d000 -> 00000000:00f8e000
  get Phys(data[n=2+1000]=f765e000)
AtapiVirtToPhysAddr_: f765e000 -> 00000000:00f8f000
  get Phys(data[n=2+2000]=f765f000)
AtapiVirtToPhysAddr_: f765f000 -> 00000000:00f68000
  get Phys(data[n=3+1000]=f7660000)
AtapiVirtToPhysAddr_: f7660000 -> 00000000:00f79000
  get Phys(data[n=4+1000]=f7661000)
AtapiVirtToPhysAddr_: f7661000 -> 00000000:00f82000
  get Phys(data[n=5+1000]=f7662000)
AtapiVirtToPhysAddr_: f7662000 -> 00000000:00f73000
  get Phys(data[n=6+1000]=f7663000)
AtapiVirtToPhysAddr_: f7663000 -> 00000000:00f7c000
  get Phys(data[n=7+1000]=f7664000)
AtapiVirtToPhysAddr_: f7664000 -> 00000000:00f7d000
  get Phys(data[n=7+2000]=f7665000)
AtapiVirtToPhysAddr_: f7665000 -> 00000000:00f86000
  get Phys(data[n=8+1000]=f7666000)
AtapiVirtToPhysAddr_: f7666000 -> 00000000:00f87000
  get Phys(data[n=8+2000]=f7667000)
AtapiVirtToPhysAddr_: f7667000 -> 00000000:00f60000
  get Phys(data[n=9+1000]=f7668000)
AtapiVirtToPhysAddr_: f7668000 -> 00000000:00f71000
  get Phys(data[n=10+1000]=f7669000)
AtapiVirtToPhysAddr_: f7669000 -> 00000000:00f7a000
  get Phys(data[n=11+1000]=f766a000)
AtapiVirtToPhysAddr_: f766a000 -> 00000000:00f6b000
  get Phys(data[n=12+1000]=f766b000)
AtapiVirtToPhysAddr_: f766b000 -> 00000000:00f74000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 13 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
Intel 0
AtaSetTransferMode: Set 0x42 on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x42 feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b26721b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x41, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b2672180
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  DmaTransfer + !BM_STATUS_INTR (1)
  getting status...
  status 0xd0
  special case DMA + ATAPI + IDE_STATUS_DSC -> our
  ATAPI status 0xd0
  ATAPI additional check
  status re-check 0xd0
  Error reg (0xd0)
  still BUSY, seems it is not our
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2672180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2672180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb23a2928, CDB 0xb23a2958, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23a2928
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b23a2958)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f766c000, count 10000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f766c000)
AtapiVirtToPhysAddr_: f766c000 -> 00000000:00f75000
  get Phys(data[n=1+1000]=f766d000)
AtapiVirtToPhysAddr_: f766d000 -> 00000000:00f7e000
  get Phys(data[n=2+1000]=f766e000)
AtapiVirtToPhysAddr_: f766e000 -> 00000000:00f7f000
  get Phys(data[n=2+2000]=f766f000)
AtapiVirtToPhysAddr_: f766f000 -> 00000000:00f58000
  get Phys(data[n=3+1000]=f7670000)
AtapiVirtToPhysAddr_: f7670000 -> 00000000:00f69000
  get Phys(data[n=4+1000]=f7671000)
AtapiVirtToPhysAddr_: f7671000 -> 00000000:00f72000
  get Phys(data[n=5+1000]=f7672000)
AtapiVirtToPhysAddr_: f7672000 -> 00000000:00f63000
  get Phys(data[n=6+1000]=f7673000)
AtapiVirtToPhysAddr_: f7673000 -> 00000000:00f6c000
  get Phys(data[n=7+1000]=f7674000)
AtapiVirtToPhysAddr_: f7674000 -> 00000000:00f6d000
  get Phys(data[n=7+2000]=f7675000)
AtapiVirtToPhysAddr_: f7675000 -> 00000000:00f76000
  get Phys(data[n=8+1000]=f7676000)
AtapiVirtToPhysAddr_: f7676000 -> 00000000:00f77000
  get Phys(data[n=8+2000]=f7677000)
AtapiVirtToPhysAddr_: f7677000 -> 00000000:00f50000
  get Phys(data[n=9+1000]=f7678000)
AtapiVirtToPhysAddr_: f7678000 -> 00000000:00f61000
  get Phys(data[n=10+1000]=f7679000)
AtapiVirtToPhysAddr_: f7679000 -> 00000000:00f6a000
  get Phys(data[n=11+1000]=f767a000)
AtapiVirtToPhysAddr_: f767a000 -> 00000000:00f5b000
  get Phys(data[n=12+1000]=f767b000)
AtapiVirtToPhysAddr_: f767b000 -> 00000000:00f64000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 13 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b23a2958 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b23a2928
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23a2928, status 1
AtapiInterrupt: RequestComplete, srb 0xb23a2928
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb23a0240, CDB 0xb23a0270, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23a0240
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b23a0270)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f767c000, count 10000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f767c000)
AtapiVirtToPhysAddr_: f767c000 -> 00000000:00f65000
  get Phys(data[n=1+1000]=f767d000)
AtapiVirtToPhysAddr_: f767d000 -> 00000000:00f6e000
  get Phys(data[n=2+1000]=f767e000)
AtapiVirtToPhysAddr_: f767e000 -> 00000000:00f6f000
  get Phys(data[n=2+2000]=f767f000)
AtapiVirtToPhysAddr_: f767f000 -> 00000000:00f48000
  get Phys(data[n=3+1000]=f7680000)
AtapiVirtToPhysAddr_: f7680000 -> 00000000:00f59000
  get Phys(data[n=4+1000]=f7681000)
AtapiVirtToPhysAddr_: f7681000 -> 00000000:00f62000
  get Phys(data[n=5+1000]=f7682000)
AtapiVirtToPhysAddr_: f7682000 -> 00000000:00f53000
  get Phys(data[n=6+1000]=f7683000)
AtapiVirtToPhysAddr_: f7683000 -> 00000000:00f5c000
  get Phys(data[n=7+1000]=f7684000)
AtapiVirtToPhysAddr_: f7684000 -> 00000000:00f5d000
  get Phys(data[n=7+2000]=f7685000)
AtapiVirtToPhysAddr_: f7685000 -> 00000000:00f66000
  get Phys(data[n=8+1000]=f7686000)
AtapiVirtToPhysAddr_: f7686000 -> 00000000:00f67000
  get Phys(data[n=8+2000]=f7687000)
AtapiVirtToPhysAddr_: f7687000 -> 00000000:00f40000
  get Phys(data[n=9+1000]=f7688000)
AtapiVirtToPhysAddr_: f7688000 -> 00000000:00f51000
  get Phys(data[n=10+1000]=f7689000)
AtapiVirtToPhysAddr_: f7689000 -> 00000000:00f5a000
  get Phys(data[n=11+1000]=f768a000)
AtapiVirtToPhysAddr_: f768a000 -> 00000000:00f4b000
  get Phys(data[n=12+1000]=f768b000)
AtapiVirtToPhysAddr_: f768b000 -> 00000000:00f54000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 13 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b23a0270 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b23a0240
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23a0240, status 1
AtapiInterrupt: RequestComplete, srb 0xb23a0240
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb239fe28, CDB 0xb239fe58, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb239fe28
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b239fe58)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f768c000, count 10000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f768c000)
AtapiVirtToPhysAddr_: f768c000 -> 00000000:00f55000
  get Phys(data[n=1+1000]=f768d000)
AtapiVirtToPhysAddr_: f768d000 -> 00000000:00f5e000
  get Phys(data[n=2+1000]=f768e000)
AtapiVirtToPhysAddr_: f768e000 -> 00000000:00f5f000
  get Phys(data[n=2+2000]=f768f000)
AtapiVirtToPhysAddr_: f768f000 -> 00000000:00f38000
  get Phys(data[n=3+1000]=f7690000)
AtapiVirtToPhysAddr_: f7690000 -> 00000000:00f49000
  get Phys(data[n=4+1000]=f7691000)
AtapiVirtToPhysAddr_: f7691000 -> 00000000:00f52000
  get Phys(data[n=5+1000]=f7692000)
AtapiVirtToPhysAddr_: f7692000 -> 00000000:00f43000
  get Phys(data[n=6+1000]=f7693000)
AtapiVirtToPhysAddr_: f7693000 -> 00000000:00f4c000
  get Phys(data[n=7+1000]=f7694000)
AtapiVirtToPhysAddr_: f7694000 -> 00000000:00f4d000
  get Phys(data[n=7+2000]=f7695000)
AtapiVirtToPhysAddr_: f7695000 -> 00000000:00f56000
  get Phys(data[n=8+1000]=f7696000)
AtapiVirtToPhysAddr_: f7696000 -> 00000000:00f57000
  get Phys(data[n=8+2000]=f7697000)
AtapiVirtToPhysAddr_: f7697000 -> 00000000:00f30000
  get Phys(data[n=9+1000]=f7698000)
AtapiVirtToPhysAddr_: f7698000 -> 00000000:00f41000
  get Phys(data[n=10+1000]=f7699000)
AtapiVirtToPhysAddr_: f7699000 -> 00000000:00f4a000
  get Phys(data[n=11+1000]=f769a000)
AtapiVirtToPhysAddr_: f769a000 -> 00000000:00f3b000
  get Phys(data[n=12+1000]=f769b000)
AtapiVirtToPhysAddr_: f769b000 -> 00000000:00f44000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 13 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b239fe58 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b239fe28
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb239fe28, status 1
AtapiInterrupt: RequestComplete, srb 0xb239fe28
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb239eb68, CDB 0xb239eb98, AtaReq 0xb267d000, SCmd 0x0
UniataNeedQueueing: TopLevel, qd=0
Send to device 0
TopLevel (2), srb 0xb239eb68
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 0
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b239eb98)
  assume 0-transfer
AtapiSendCommand: zero/unaligned transfer 0, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 0
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiDmaReinit: set PIO mode on Device 0 (42 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
Intel 0
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b239eb98 Command 0x0 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b239eb68
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: wordCount 0x0, WordsTransfered 0x0
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0x0, srb->DataBuffer 0x0, len 0x0
   Transfered 0, full size 0
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb239eb68, status 1
AtapiInterrupt: RequestComplete, srb 0xb239eb68
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb239fe28, CDB 0xb239fe58, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb239fe28
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b239fe58)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0xc, data f7691000, count 4000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7691000)
AtapiVirtToPhysAddr_: f7691000 -> 00000000:04c91000
  get Phys(data[n=1+1000]=f7692000)
AtapiVirtToPhysAddr_: f7692000 -> 00000000:04c92000
  get Phys(data[n=1+2000]=f7693000)
AtapiVirtToPhysAddr_: f7693000 -> 00000000:04c93000
  get Phys(data[n=1+3000]=f7694000)
AtapiVirtToPhysAddr_: f7694000 -> 00000000:04c94000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 1 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
Intel 0
AtaSetTransferMode: Set 0x42 on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x42 feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b239fe58 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x40:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x41, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b239fe28
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  DmaTransfer + !BM_STATUS_INTR (1)
  getting status...
  status 0xc0
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 4000, full size 4000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb239fe28, status 1
AtapiInterrupt: RequestComplete, srb 0xb239fe28
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb239eb68, CDB 0xb239eb98, AtaReq 0xb267d000, SCmd 0x0
UniataNeedQueueing: TopLevel, qd=0
Send to device 0
TopLevel (2), srb 0xb239eb68
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 0
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b239eb98)
  assume 0-transfer
AtapiSendCommand: zero/unaligned transfer 0, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 0
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiDmaReinit: set PIO mode on Device 0 (42 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
Intel 0
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b239eb98 Command 0x0 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b239eb68
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: wordCount 0x0, WordsTransfered 0x0
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0x0, srb->DataBuffer 0x0, len 0x0
   Transfered 0, full size 0
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb239eb68, status 1
AtapiInterrupt: RequestComplete, srb 0xb239eb68
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
(../base/setup/usetup/interface/devinst.c:95) Using driver 'pci.sys' for device 'PCI_HAL\PNP0A03\0'
(../ntoskrnl/io/pnpmgr/plugplay.c:766) A new driver will be loaded for 'PCI_HAL\PNP0A03\0' (no FDO above)
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb239eb68, CDB 0xb239eb98, AtaReq 0xb267d000, SCmd 0x0
UniataNeedQueueing: TopLevel, qd=0
Send to device 0
TopLevel (2), srb 0xb239eb68
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 0
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b239eb98)
  assume 0-transfer
AtapiSendCommand: zero/unaligned transfer 0, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 0
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b239eb98 Command 0x0 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b239eb68
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: wordCount 0x0, WordsTransfered 0x0
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0x0, srb->DataBuffer 0x0, len 0x0
   Transfered 0, full size 0
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb239eb68, status 1
AtapiInterrupt: RequestComplete, srb 0xb239eb68
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb239eb68, CDB 0xb239eb98, AtaReq 0xb267d000, SCmd 0x0
UniataNeedQueueing: TopLevel, qd=0
Send to device 0
TopLevel (2), srb 0xb239eb68
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 0
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b239eb98)
  assume 0-transfer
AtapiSendCommand: zero/unaligned transfer 0, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 0
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b239eb98 Command 0x0 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b239eb68
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: wordCount 0x0, WordsTransfered 0x0
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0x0, srb->DataBuffer 0x0, len 0x0
   Transfered 0, full size 0
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb239eb68, status 1
AtapiInterrupt: RequestComplete, srb 0xb239eb68
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb239fe28, CDB 0xb239fe58, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb239fe28
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b239fe58)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0xc, data f7687000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7687000)
AtapiVirtToPhysAddr_: f7687000 -> 00000000:00edc000
  get Phys(data[n=1+1000]=f7688000)
AtapiVirtToPhysAddr_: f7688000 -> 00000000:00edd000
  get Phys(data[n=1+2000]=f7689000)
AtapiVirtToPhysAddr_: f7689000 -> 00000000:00ee6000
  get Phys(data[n=2+1000]=f768a000)
AtapiVirtToPhysAddr_: f768a000 -> 00000000:00ee7000
  get Phys(data[n=2+2000]=f768b000)
AtapiVirtToPhysAddr_: f768b000 -> 00000000:00ec0000
  get Phys(data[n=3+1000]=f768c000)
AtapiVirtToPhysAddr_: f768c000 -> 00000000:00ed1000
  get Phys(data[n=4+1000]=f768d000)
AtapiVirtToPhysAddr_: f768d000 -> 00000000:00ed2000
  get Phys(data[n=4+2000]=f768e000)
AtapiVirtToPhysAddr_: f768e000 -> 00000000:00ec3000
  get Phys(data[n=5+1000]=f768f000)
AtapiVirtToPhysAddr_: f768f000 -> 00000000:00ed4000
  get Phys(data[n=6+1000]=f7690000)
AtapiVirtToPhysAddr_: f7690000 -> 00000000:00ed5000
  get Phys(data[n=6+2000]=f7691000)
AtapiVirtToPhysAddr_: f7691000 -> 00000000:00ede000
  get Phys(data[n=7+1000]=f7692000)
AtapiVirtToPhysAddr_: f7692000 -> 00000000:00edf000
  get Phys(data[n=7+2000]=f7693000)
AtapiVirtToPhysAddr_: f7693000 -> 00000000:00eb8000
  get Phys(data[n=8+1000]=f7694000)
AtapiVirtToPhysAddr_: f7694000 -> 00000000:00ec9000
  get Phys(data[n=9+1000]=f7695000)
AtapiVirtToPhysAddr_: f7695000 -> 00000000:00eca000
  get Phys(data[n=9+2000]=f7696000)
AtapiVirtToPhysAddr_: f7696000 -> 00000000:00ebb000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 10 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
Intel 0
AtaSetTransferMode: Set 0x42 on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x42 feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b239fe58 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x41, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b239fe28
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  DmaTransfer + !BM_STATUS_INTR (1)
  getting status...
  status 0xc0
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb239fe28, status 1
AtapiInterrupt: RequestComplete, srb 0xb239fe28
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb23a0240, CDB 0xb23a0270, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23a0240
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b23a0270)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f7697000, count 2000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7697000)
AtapiVirtToPhysAddr_: f7697000 -> 00000000:00ecc000
  get Phys(data[n=1+1000]=f7698000)
AtapiVirtToPhysAddr_: f7698000 -> 00000000:00ecd000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 1 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b23a0270 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x20:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b23a0240
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23a0240, status 1
AtapiInterrupt: RequestComplete, srb 0xb23a0240
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb23a0240, CDB 0xb23a0270, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23a0240
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b23a0270)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f7698008, count 800, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7698008)
AtapiVirtToPhysAddr_: f7698008 -> 00000000:04c94008
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 1 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b23a0270 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x8:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b23a0240
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 800, full size 800
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23a0240, status 1
AtapiInterrupt: RequestComplete, srb 0xb23a0240
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb23a0240, CDB 0xb23a0270, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23a0240
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b23a0270)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f7694000, count 2000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7694000)
AtapiVirtToPhysAddr_: f7694000 -> 00000000:02844000
  get Phys(data[n=1+1000]=f7695000)
AtapiVirtToPhysAddr_: f7695000 -> 00000000:02845000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 1 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b23a0270 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x20:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b23a0240
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23a0240, status 1
AtapiInterrupt: RequestComplete, srb 0xb23a0240
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb239eb68, CDB 0xb239eb98, AtaReq 0xb267d000, SCmd 0x0
UniataNeedQueueing: TopLevel, qd=0
Send to device 0
TopLevel (2), srb 0xb239eb68
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 0
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b239eb98)
  assume 0-transfer
AtapiSendCommand: zero/unaligned transfer 0, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 0
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiDmaReinit: set PIO mode on Device 0 (42 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
Intel 0
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b239eb98 Command 0x0 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b239eb68
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: wordCount 0x0, WordsTransfered 0x0
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0x0, srb->DataBuffer 0x0, len 0x0
   Transfered 0, full size 0
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb239eb68, status 1
AtapiInterrupt: RequestComplete, srb 0xb239eb68
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
(../ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\System32\drivers\pci.sys at F7672000 with 12 pages
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb23a0240, CDB 0xb23a0270, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23a0240
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b23a0270)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0xc, data f766c000, count 6000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f766c000)
AtapiVirtToPhysAddr_: f766c000 -> 00000000:04c8a000
  get Phys(data[n=1+1000]=f766d000)
AtapiVirtToPhysAddr_: f766d000 -> 00000000:04c8b000
  get Phys(data[n=1+2000]=f766e000)
AtapiVirtToPhysAddr_: f766e000 -> 00000000:04c8c000
  get Phys(data[n=1+3000]=f766f000)
AtapiVirtToPhysAddr_: f766f000 -> 00000000:04c8d000
  get Phys(data[n=1+4000]=f7670000)
AtapiVirtToPhysAddr_: f7670000 -> 00000000:04c8e000
  get Phys(data[n=1+5000]=f7671000)
AtapiVirtToPhysAddr_: f7671000 -> 00000000:04c8f000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 1 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
Intel 0
AtaSetTransferMode: Set 0x42 on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x42 feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b23a0270 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x60:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x41, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b23a0240
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  DmaTransfer + !BM_STATUS_INTR (1)
  getting status...
  status 0xc0
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
(../hal/halx86/legacy/halpnpdd.c:793) Illegal IRP: d
(../hal/halx86/legacy/halpnpdd.c:793) Illegal IRP: 14
(../ntoskrnl/io/pnpmgr/pnpmgr.c:4059) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 6000, full size 6000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23a0240, status 1
AtapiInterrupt: RequestComplete, srb 0xb23a0240
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(../base/setup/usetup/interface/devinst.c:95) Using driver 'i8042prt.sys' for device 'Root\*PNP0303\0000'
(../base/setup/usetup/interface/devinst.c:147) Installing keyboard class driver for 'Root\*PNP0303\0000'
(../ntoskrnl/io/pnpmgr/plugplay.c:766) A new driver will be loaded for 'Root\*PNP0303\0000' (no FDO above)
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb239eb68, CDB 0xb239eb98, AtaReq 0xb267d000, SCmd 0x0
UniataNeedQueueing: TopLevel, qd=0
Send to device 0
TopLevel (2), srb 0xb239eb68
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 0
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b239eb98)
  assume 0-transfer
AtapiSendCommand: zero/unaligned transfer 0, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 0
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiDmaReinit: set PIO mode on Device 0 (42 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
Intel 0
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b239eb98 Command 0x0 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b239eb68
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: wordCount 0x0, WordsTransfered 0x0
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0x0, srb->DataBuffer 0x0, len 0x0
   Transfered 0, full size 0
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb239eb68, status 1
AtapiInterrupt: RequestComplete, srb 0xb239eb68
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb23a0240, CDB 0xb23a0270, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23a0240
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b23a0270)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0xc, data f7658000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7658000)
AtapiVirtToPhysAddr_: f7658000 -> 00000000:01137000
  get Phys(data[n=1+1000]=f7659000)
AtapiVirtToPhysAddr_: f7659000 -> 00000000:01138000
  get Phys(data[n=1+2000]=f765a000)
AtapiVirtToPhysAddr_: f765a000 -> 00000000:01139000
  get Phys(data[n=1+3000]=f765b000)
AtapiVirtToPhysAddr_: f765b000 -> 00000000:0113a000
  get Phys(data[n=1+4000]=f765c000)
AtapiVirtToPhysAddr_: f765c000 -> 00000000:01143000
  get Phys(data[n=2+1000]=f765d000)
AtapiVirtToPhysAddr_: f765d000 -> 00000000:0113c000
  get Phys(data[n=3+1000]=f765e000)
AtapiVirtToPhysAddr_: f765e000 -> 00000000:01145000
  get Phys(data[n=4+1000]=f765f000)
AtapiVirtToPhysAddr_: f765f000 -> 00000000:01136000
  get Phys(data[n=5+1000]=f7660000)
AtapiVirtToPhysAddr_: f7660000 -> 00000000:0113f000
  get Phys(data[n=6+1000]=f7661000)
AtapiVirtToPhysAddr_: f7661000 -> 00000000:01140000
  get Phys(data[n=7+1000]=f7662000)
AtapiVirtToPhysAddr_: f7662000 -> 00000000:01141000
  get Phys(data[n=7+2000]=f7663000)
AtapiVirtToPhysAddr_: f7663000 -> 00000000:01142000
  get Phys(data[n=7+3000]=f7664000)
AtapiVirtToPhysAddr_: f7664000 -> 00000000:0114b000
  get Phys(data[n=8+1000]=f7665000)
AtapiVirtToPhysAddr_: f7665000 -> 00000000:01144000
  get Phys(data[n=9+1000]=f7666000)
AtapiVirtToPhysAddr_: f7666000 -> 00000000:0114d000
  get Phys(data[n=10+1000]=f7667000)
AtapiVirtToPhysAddr_: f7667000 -> 00000000:0113e000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 11 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
Intel 0
AtaSetTransferMode: Set 0x42 on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x42 feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b23a0270 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x41, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b23a0240
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  DmaTransfer + !BM_STATUS_INTR (1)
  getting status...
  status 0xc0
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23a0240, status 1
AtapiInterrupt: RequestComplete, srb 0xb23a0240
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb239fe28, CDB 0xb239fe58, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb239fe28
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b239fe58)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f7668000, count a000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7668000)
AtapiVirtToPhysAddr_: f7668000 -> 00000000:01147000
  get Phys(data[n=1+1000]=f7669000)
AtapiVirtToPhysAddr_: f7669000 -> 00000000:01148000
  get Phys(data[n=1+2000]=f766a000)
AtapiVirtToPhysAddr_: f766a000 -> 00000000:01149000
  get Phys(data[n=1+3000]=f766b000)
AtapiVirtToPhysAddr_: f766b000 -> 00000000:0114a000
  get Phys(data[n=1+4000]=f766c000)
AtapiVirtToPhysAddr_: f766c000 -> 00000000:01153000
  get Phys(data[n=2+1000]=f766d000)
AtapiVirtToPhysAddr_: f766d000 -> 00000000:0114c000
  get Phys(data[n=3+1000]=f766e000)
AtapiVirtToPhysAddr_: f766e000 -> 00000000:01155000
  get Phys(data[n=4+1000]=f766f000)
AtapiVirtToPhysAddr_: f766f000 -> 00000000:01146000
  get Phys(data[n=5+1000]=f7670000)
AtapiVirtToPhysAddr_: f7670000 -> 00000000:0114f000
  get Phys(data[n=6+1000]=f7671000)
AtapiVirtToPhysAddr_: f7671000 -> 00000000:01150000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 7 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b239fe58 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xa0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b239fe28
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered a000, full size a000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb239fe28, status 1
AtapiInterrupt: RequestComplete, srb 0xb239fe28
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb239fe28, CDB 0xb239fe58, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb239fe28
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b239fe58)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f7696000, count 2000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7696000)
AtapiVirtToPhysAddr_: f7696000 -> 00000000:3f74f000
  get Phys(data[n=1+1000]=f7697000)
AtapiVirtToPhysAddr_: f7697000 -> 00000000:3f750000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 2 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b239fe58 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x20:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b239fe28
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb239fe28, status 1
AtapiInterrupt: RequestComplete, srb 0xb239fe28
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(../ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\System32\drivers\i8042prt.sys at F7658000 with 1a pages
(../ntoskrnl/wmi/smbios.c:172) Could not find the SMBIOS entry point
(../ntoskrnl/wmi/smbios.c:232) WmipGetRawSMBiosTableData failed: 0x08lx
(../drivers/input/i8042prt/hwhacks.c:248) IoWMIOpenBlock failed: 0xc0000225
(../drivers/input/i8042prt/pnp.c:755) IRP_MJ_PNP / unknown minor function 0x9
(../ntoskrnl/io/pnpmgr/pnproot.c:1198) IRP_MJ_PNP / Unknown minor function 0x14
(../ntoskrnl/io/pnpmgr/pnpmgr.c:4059) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb
(../base/setup/usetup/interface/devinst.c:95) Using driver 'pci.sys' for device 'PCI\VEN_8086&DEV_7191&SUBSYS_00000000&REV_03\2&b3ac4ede&01'
(../ntoskrnl/io/pnpmgr/plugplay.c:766) A new driver will be loaded for 'PCI\VEN_8086&DEV_7191&SUBSYS_00000000&REV_03\2&b3ac4ede&01' (no FDO above)
(../ntoskrnl/io/pnpmgr/pnpmgr.c:4059) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb
(../base/setup/usetup/interface/devinst.c:95) Using driver 'pciide.sys' for device 'PCI\VEN_8086&DEV_7111&SUBSYS_00000000&REV_01\2&b3ac4ede&24'
(../ntoskrnl/io/pnpmgr/plugplay.c:766) A new driver will be loaded for 'PCI\VEN_8086&DEV_7111&SUBSYS_00000000&REV_01\2&b3ac4ede&24' (no FDO above)
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb239eb68, CDB 0xb239eb98, AtaReq 0xb267d000, SCmd 0x0
UniataNeedQueueing: TopLevel, qd=0
Send to device 0
TopLevel (2), srb 0xb239eb68
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 0
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b239eb98)
  assume 0-transfer
AtapiSendCommand: zero/unaligned transfer 0, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 0
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiDmaReinit: set PIO mode on Device 0 (42 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
Intel 0
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b239eb98 Command 0x0 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b239eb68
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: wordCount 0x0, WordsTransfered 0x0
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0x0, srb->DataBuffer 0x0, len 0x0
   Transfered 0, full size 0
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb239eb68, status 1
AtapiInterrupt: RequestComplete, srb 0xb239eb68
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb239fe28, CDB 0xb239fe58, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb239fe28
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b239fe58)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0xc, data f7690000, count 9000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7690000)
AtapiVirtToPhysAddr_: f7690000 -> 00000000:3f39f000
  get Phys(data[n=1+1000]=f7691000)
AtapiVirtToPhysAddr_: f7691000 -> 00000000:3f3a0000
  get Phys(data[n=2+1000]=f7692000)
AtapiVirtToPhysAddr_: f7692000 -> 00000000:3f3a1000
  get Phys(data[n=2+2000]=f7693000)
AtapiVirtToPhysAddr_: f7693000 -> 00000000:3f3a2000
  get Phys(data[n=2+3000]=f7694000)
AtapiVirtToPhysAddr_: f7694000 -> 00000000:3f3ab000
  get Phys(data[n=3+1000]=f7695000)
AtapiVirtToPhysAddr_: f7695000 -> 00000000:3f39c000
  get Phys(data[n=4+1000]=f7696000)
AtapiVirtToPhysAddr_: f7696000 -> 00000000:3f39d000
  get Phys(data[n=4+2000]=f7697000)
AtapiVirtToPhysAddr_: f7697000 -> 00000000:3f39e000
  get Phys(data[n=4+3000]=f7698000)
AtapiVirtToPhysAddr_: f7698000 -> 00000000:3f3a7000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 5 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
Intel 0
AtaSetTransferMode: Set 0x42 on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x42 feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b239fe58 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x90:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x41, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b239fe28
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 9000, full size 9000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb239fe28, status 1
AtapiInterrupt: RequestComplete, srb 0xb239fe28
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb239fe28, CDB 0xb239fe58, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb239fe28
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b239fe58)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f7696000, count 2000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7696000)
AtapiVirtToPhysAddr_: f7696000 -> 00000000:3f37f000
  get Phys(data[n=1+1000]=f7697000)
AtapiVirtToPhysAddr_: f7697000 -> 00000000:3f380000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 2 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b239fe58 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x20:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b239fe28
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb239fe28, status 1
AtapiInterrupt: RequestComplete, srb 0xb239fe28
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(../ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\System32\drivers\pciide.sys at F7692000 with 8 pages
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb239eb68, CDB 0xb239eb98, AtaReq 0xb267d000, SCmd 0x0
UniataNeedQueueing: TopLevel, qd=0
Send to device 0
TopLevel (2), srb 0xb239eb68
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 0
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b239eb98)
  assume 0-transfer
AtapiSendCommand: zero/unaligned transfer 0, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 0
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiDmaReinit: set PIO mode on Device 0 (42 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
Intel 0
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b239eb98 Command 0x0 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b239eb68
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: wordCount 0x0, WordsTransfered 0x0
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0x0, srb->DataBuffer 0x0, len 0x0
   Transfered 0, full size 0
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb239eb68, status 1
AtapiInterrupt: RequestComplete, srb 0xb239eb68
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb239fe28, CDB 0xb239fe58, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb239fe28
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b239fe58)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0xc, data f7684000, count d000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f7684000)
AtapiVirtToPhysAddr_: f7684000 -> 00000000:3f189000
  get Phys(data[n=1+1000]=f7685000)
AtapiVirtToPhysAddr_: f7685000 -> 00000000:3f18a000
  get Phys(data[n=1+2000]=f7686000)
AtapiVirtToPhysAddr_: f7686000 -> 00000000:3f18b000
  get Phys(data[n=1+3000]=f7687000)
AtapiVirtToPhysAddr_: f7687000 -> 00000000:3f18c000
  get Phys(data[n=1+4000]=f7688000)
AtapiVirtToPhysAddr_: f7688000 -> 00000000:3f185000
  get Phys(data[n=2+1000]=f7689000)
AtapiVirtToPhysAddr_: f7689000 -> 00000000:3f186000
  get Phys(data[n=2+2000]=f768a000)
AtapiVirtToPhysAddr_: f768a000 -> 00000000:3f187000
  get Phys(data[n=2+3000]=f768b000)
AtapiVirtToPhysAddr_: f768b000 -> 00000000:3f188000
  get Phys(data[n=2+4000]=f768c000)
AtapiVirtToPhysAddr_: f768c000 -> 00000000:3f191000
  get Phys(data[n=3+1000]=f768d000)
AtapiVirtToPhysAddr_: f768d000 -> 00000000:3f192000
  get Phys(data[n=3+2000]=f768e000)
AtapiVirtToPhysAddr_: f768e000 -> 00000000:3f193000
  get Phys(data[n=3+3000]=f768f000)
AtapiVirtToPhysAddr_: f768f000 -> 00000000:3f194000
  get Phys(data[n=3+4000]=f7690000)
AtapiVirtToPhysAddr_: f7690000 -> 00000000:3f18d000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 4 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
Intel 0
AtaSetTransferMode: Set 0x42 on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x42 feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b239fe58 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xd0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x41, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b239fe28
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered d000, full size d000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb239fe28, status 1
AtapiInterrupt: RequestComplete, srb 0xb239fe28
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb239fe28, CDB 0xb239fe58, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb239fe28
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b239fe58)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f768e000, count 2000, lCh 0, dev 0
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f768e000)
AtapiVirtToPhysAddr_: f768e000 -> 00000000:3f179000
  get Phys(data[n=1+1000]=f768f000)
AtapiVirtToPhysAddr_: f768f000 -> 00000000:3f17a000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 1 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b239fe58 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x20:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b239fe28
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb239fe28, status 1
AtapiInterrupt: RequestComplete, srb 0xb239fe28
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(../ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\System32\drivers\pciidex.sys at F7686000 with c pages
(../hal/halx86/legacy/bus/pcibus.c:698) HAL: No PCI Resource Adjustment done! Hardware may malfunction
(../drivers/storage/ide/pciidex/fdo.c:467) IRP_MJ_PNP / Unknown minor function 0x9
(../base/setup/usetup/interface/devinst.c:95) Using driver 'usbuhci.sys' for device 'PCI\VEN_8086&DEV_7112&SUBSYS_00000000&REV_01\2&b3ac4ede&44'
(../ntoskrnl/io/pnpmgr/plugplay.c:766) A new driver will be loaded for 'PCI\VEN_8086&DEV_7112&SUBSYS_00000000&REV_01\2&b3ac4ede&44' (no FDO above)
(../hal/halx86/legacy/bus/pcibus.c:698) HAL: No PCI Resource Adjustment done! Hardware may malfunction
(../ntoskrnl/io/pnpmgr/pnpmgr.c:4059) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb
(../base/setup/usetup/interface/devinst.c:95) Using driver 'uniata.sys' for device 'PCIIDE\IDEChannel\3&8529cb0b&0'
(../sdk/lib/drivers/libusb/hub_controller.cpp:3991) There was no pending IRP for SCE. Did the usb hub 2.0 driver (usbhub2) load?
(../ntoskrnl/io/pnpmgr/plugplay.c:766) A new driver will be loaded for 'PCIIDE\IDEChannel\3&8529cb0b&0' (no FDO above)
(../base/setup/usetup/interface/devinst.c:95) Using driver 'uniata.sys' for device 'PCIIDE\IDEChannel\3&8529cb0b&1'
(../ntoskrnl/io/pnpmgr/plugplay.c:766) A new driver will be loaded for 'PCIIDE\IDEChannel\3&8529cb0b&1' (no FDO above)
(../base/setup/usetup/interface/devinst.c:95) Using driver 'usbhub.sys' for device 'USB\ROOT_HUB\3&e9f441d4'
(../ntoskrnl/io/pnpmgr/plugplay.c:766) A new driver will be loaded for 'USB\ROOT_HUB\3&e9f441d4' (no FDO above)
(../ntoskrnl/io/pnpmgr/pnpmgr.c:4059) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb
(../sdk/lib/drivers/libusb/hub_controller.cpp:334) [USBUHCI] Change state on port 1
(../sdk/lib/drivers/libusb/hub_controller.cpp:2705) USBHI_CreateUsbDevice
(../sdk/lib/drivers/libusb/usb_device.cpp:314) [USBUHCI] SetDeviceAddress> Address 1
(../sdk/lib/drivers/libusb/usb_device.cpp:362) [USBUHCI] SetDeviceAddress> device returned bogus device descriptor
(../sdk/lib/drivers/libusb/usb_device.cpp:844) Dumping Device Descriptor B23A2A18
(../sdk/lib/drivers/libusb/usb_device.cpp:845) bLength 12
(../sdk/lib/drivers/libusb/usb_device.cpp:846) bDescriptorType 1
(../sdk/lib/drivers/libusb/usb_device.cpp:847) bcdUSB 110
(../sdk/lib/drivers/libusb/usb_device.cpp:848) bDeviceClass 9
(../sdk/lib/drivers/libusb/usb_device.cpp:849) bDeviceSubClass 0
(../sdk/lib/drivers/libusb/usb_device.cpp:850) bDeviceProtocol 0
(../sdk/lib/drivers/libusb/usb_device.cpp:851) bMaxPacketSize0 8
(../sdk/lib/drivers/libusb/usb_device.cpp:852) idVendor 0
(../sdk/lib/drivers/libusb/usb_device.cpp:853) idProduct 0
(../sdk/lib/drivers/libusb/usb_device.cpp:854) bcdDevice 0
(../sdk/lib/drivers/libusb/usb_device.cpp:855) iManufacturer 0
(../sdk/lib/drivers/libusb/usb_device.cpp:856) iProduct 0
(../sdk/lib/drivers/libusb/usb_device.cpp:857) iSerialNumber 0
(../sdk/lib/drivers/libusb/usb_device.cpp:858) bNumConfigurations 0
(../sdk/lib/drivers/libusb/usb_device.cpp:314) [USBUHCI] SetDeviceAddress> Address 1
(../sdk/lib/drivers/libusb/usb_device.cpp:362) [USBUHCI] SetDeviceAddress> device returned bogus device descriptor
(../sdk/lib/drivers/libusb/usb_device.cpp:844) Dumping Device Descriptor B23A2A18
(../sdk/lib/drivers/libusb/usb_device.cpp:845) bLength 12
(../sdk/lib/drivers/libusb/usb_device.cpp:846) bDescriptorType 1
(../sdk/lib/drivers/libusb/usb_device.cpp:847) bcdUSB 110
(../sdk/lib/drivers/libusb/usb_device.cpp:848) bDeviceClass 9
(../sdk/lib/drivers/libusb/usb_device.cpp:849) bDeviceSubClass 0
(../sdk/lib/drivers/libusb/usb_device.cpp:850) bDeviceProtocol 0
(../sdk/lib/drivers/libusb/usb_device.cpp:851) bMaxPacketSize0 8
(../sdk/lib/drivers/libusb/usb_device.cpp:852) idVendor 0
(../sdk/lib/drivers/libusb/usb_device.cpp:853) idProduct 0
(../sdk/lib/drivers/libusb/usb_device.cpp:854) bcdDevice 0
(../sdk/lib/drivers/libusb/usb_device.cpp:855) iManufacturer 0
(../sdk/lib/drivers/libusb/usb_device.cpp:856) iProduct 0
(../sdk/lib/drivers/libusb/usb_device.cpp:857) iSerialNumber 0
(../sdk/lib/drivers/libusb/usb_device.cpp:858) bNumConfigurations 0
(../sdk/lib/drivers/libusb/usb_device.cpp:314) [USBUHCI] SetDeviceAddress> Address 1
(../sdk/lib/drivers/libusb/usb_device.cpp:362) [USBUHCI] SetDeviceAddress> device returned bogus device descriptor
(../sdk/lib/drivers/libusb/usb_device.cpp:844) Dumping Device Descriptor B23A2A18
(../sdk/lib/drivers/libusb/usb_device.cpp:845) bLength 12
(../sdk/lib/drivers/libusb/usb_device.cpp:846) bDescriptorType 1
(../sdk/lib/drivers/libusb/usb_device.cpp:847) bcdUSB 110
(../sdk/lib/drivers/libusb/usb_device.cpp:848) bDeviceClass 9
(../sdk/lib/drivers/libusb/usb_device.cpp:849) bDeviceSubClass 0
(../sdk/lib/drivers/libusb/usb_device.cpp:850) bDeviceProtocol 0
(../sdk/lib/drivers/libusb/usb_device.cpp:851) bMaxPacketSize0 8
(../sdk/lib/drivers/libusb/usb_device.cpp:852) idVendor 0
(../sdk/lib/drivers/libusb/usb_device.cpp:853) idProduct 0
(../sdk/lib/drivers/libusb/usb_device.cpp:854) bcdDevice 0
(../sdk/lib/drivers/libusb/usb_device.cpp:855) iManufacturer 0
(../sdk/lib/drivers/libusb/usb_device.cpp:856) iProduct 0
(../sdk/lib/drivers/libusb/usb_device.cpp:857) iSerialNumber 0
(../sdk/lib/drivers/libusb/usb_device.cpp:858) bNumConfigurations 0
(../sdk/lib/drivers/libusb/usb_device.cpp:314) [USBUHCI] SetDeviceAddress> Address 1
(../sdk/lib/drivers/libusb/usb_device.cpp:362) [USBUHCI] SetDeviceAddress> device returned bogus device descriptor
(../sdk/lib/drivers/libusb/usb_device.cpp:844) Dumping Device Descriptor B23A2A18
(../sdk/lib/drivers/libusb/usb_device.cpp:845) bLength 12
(../sdk/lib/drivers/libusb/usb_device.cpp:846) bDescriptorType 1
(../sdk/lib/drivers/libusb/usb_device.cpp:847) bcdUSB 110
(../sdk/lib/drivers/libusb/usb_device.cpp:848) bDeviceClass 9
(../sdk/lib/drivers/libusb/usb_device.cpp:849) bDeviceSubClass 0
(../sdk/lib/drivers/libusb/usb_device.cpp:850) bDeviceProtocol 0
(../sdk/lib/drivers/libusb/usb_device.cpp:851) bMaxPacketSize0 8
(../sdk/lib/drivers/libusb/usb_device.cpp:852) idVendor 0
(../sdk/lib/drivers/libusb/usb_device.cpp:853) idProduct 0
(../sdk/lib/drivers/libusb/usb_device.cpp:854) bcdDevice 0
(../sdk/lib/drivers/libusb/usb_device.cpp:855) iManufacturer 0
(../sdk/lib/drivers/libusb/usb_device.cpp:856) iProduct 0
(../sdk/lib/drivers/libusb/usb_device.cpp:857) iSerialNumber 0
(../sdk/lib/drivers/libusb/usb_device.cpp:858) bNumConfigurations 0
(../sdk/lib/drivers/libusb/hub_controller.cpp:2859) USBHI_InitializeUsbDevice failed to set address with c0000001
(../drivers/usb/usbhub/fdo.c:1259) USBHUB: InitializeUsbDevice failed with status c000009c
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb267d000, SCmd 0x0
UniataNeedQueueing: TopLevel, qd=0
Send to device 0
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 0
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b23831b0)
  assume 0-transfer
AtapiSendCommand: zero/unaligned transfer 0, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 0
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiDmaReinit: set PIO mode on Device 0 (42 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
Intel 0
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b23831b0 Command 0x0 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: wordCount 0x0, WordsTransfered 0x0
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0x0, srb->DataBuffer 0x0, len 0x0
   Transfered 0, full size 0
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb239fe28, CDB 0xb239fe58, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb239fe28
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b239fe58)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0xc, data f763e000, count 6000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f763e000)
AtapiVirtToPhysAddr_: f763e000 -> 00000000:04c6e000
  get Phys(data[n=1+1000]=f763f000)
AtapiVirtToPhysAddr_: f763f000 -> 00000000:04c6f000
  get Phys(data[n=1+2000]=f7640000)
AtapiVirtToPhysAddr_: f7640000 -> 00000000:04c70000
  get Phys(data[n=2+1000]=f7641000)
AtapiVirtToPhysAddr_: f7641000 -> 00000000:04c71000
  get Phys(data[n=2+2000]=f7642000)
AtapiVirtToPhysAddr_: f7642000 -> 00000000:04c72000
  get Phys(data[n=2+3000]=f7643000)
AtapiVirtToPhysAddr_: f7643000 -> 00000000:04c73000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 2 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
Intel 0
AtaSetTransferMode: Set 0x42 on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x42 feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b239fe58 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x60:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x41, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b239fe28
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  DmaTransfer + !BM_STATUS_INTR (1)
  getting status...
  status 0xc0
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 6000, full size 6000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb239fe28, status 1
AtapiInterrupt: RequestComplete, srb 0xb239fe28
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb267d000, SCmd 0x0
UniataNeedQueueing: TopLevel, qd=0
Send to device 0
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 0
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b23831b0)
  assume 0-transfer
AtapiSendCommand: zero/unaligned transfer 0, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 0
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiDmaReinit: set PIO mode on Device 0 (42 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
Intel 0
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b23831b0 Command 0x0 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: wordCount 0x0, WordsTransfered 0x0
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0x0, srb->DataBuffer 0x0, len 0x0
   Transfered 0, full size 0
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb239fe28, CDB 0xb239fe58, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb239fe28
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b239fe58)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0xc, data f763e000, count 6000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f763e000)
AtapiVirtToPhysAddr_: f763e000 -> 00000000:04c6e000
  get Phys(data[n=1+1000]=f763f000)
AtapiVirtToPhysAddr_: f763f000 -> 00000000:04c6f000
  get Phys(data[n=1+2000]=f7640000)
AtapiVirtToPhysAddr_: f7640000 -> 00000000:04c70000
  get Phys(data[n=2+1000]=f7641000)
AtapiVirtToPhysAddr_: f7641000 -> 00000000:04c71000
  get Phys(data[n=2+2000]=f7642000)
AtapiVirtToPhysAddr_: f7642000 -> 00000000:04c72000
  get Phys(data[n=2+3000]=f7643000)
AtapiVirtToPhysAddr_: f7643000 -> 00000000:04c73000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 2 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
Intel 0
AtaSetTransferMode: Set 0x42 on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x42 feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b239fe58 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x60:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x41, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b239fe28
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  DmaTransfer + !BM_STATUS_INTR (1)
  getting status...
  status 0xd0
  special case DMA + ATAPI + IDE_STATUS_DSC -> our
  ATAPI status 0xd0
  ATAPI additional check
  status re-check 0x50
  Error reg (0x0)
  expecting intr + cleared BUSY
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 6000, full size 6000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb239fe28, status 1
AtapiInterrupt: RequestComplete, srb 0xb239fe28
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb267d000, SCmd 0x0
UniataNeedQueueing: TopLevel, qd=0
Send to device 0
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 0
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b23831b0)
  assume 0-transfer
AtapiSendCommand: zero/unaligned transfer 0, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 0
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiDmaReinit: set PIO mode on Device 0 (42 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
Intel 0
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b23831b0 Command 0x0 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: wordCount 0x0, WordsTransfered 0x0
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0x0, srb->DataBuffer 0x0, len 0x0
   Transfered 0, full size 0
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb239fe28, CDB 0xb239fe58, AtaReq 0xb267d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb239fe28
TopLevel (3), AtaReq 0xb267d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b239fe58)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0xc, data f763e000, count 6000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b267d060)
AtapiVirtToPhysAddr_: b267d060 -> 00000000:04f7c060
  get Phys(data[0]=f763e000)
AtapiVirtToPhysAddr_: f763e000 -> 00000000:04c6e000
  get Phys(data[n=1+1000]=f763f000)
AtapiVirtToPhysAddr_: f763f000 -> 00000000:04c6f000
  get Phys(data[n=1+2000]=f7640000)
AtapiVirtToPhysAddr_: f7640000 -> 00000000:04c70000
  get Phys(data[n=2+1000]=f7641000)
AtapiVirtToPhysAddr_: f7641000 -> 00000000:04c71000
  get Phys(data[n=2+2000]=f7642000)
AtapiVirtToPhysAddr_: f7642000 -> 00000000:04c72000
  get Phys(data[n=2+3000]=f7643000)
AtapiVirtToPhysAddr_: f7643000 -> 00000000:04c73000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 2 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
Intel 0
AtaSetTransferMode: Set 0x42 on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x42 feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b239fe58 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x60:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x41, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b239fe28
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  DmaTransfer + !BM_STATUS_INTR (1)
  getting status...
  status 0xd0
  special case DMA + ATAPI + IDE_STATUS_DSC -> our
  ATAPI status 0xd0
  ATAPI additional check
  status re-check 0x50
  Error reg (0x0)
  expecting intr + cleared BUSY
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 6000, full size 6000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb239fe28, status 1
AtapiInterrupt: RequestComplete, srb 0xb239fe28
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
(../ntoskrnl/io/iomgr/file.c:554) Using IopParseDevice() hack. Requested invalid attributes: 1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf76a3a30, CDB 0xf76a3a60, AtaReq 0xb23fc000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf76a3a30
TopLevel (3), AtaReq 0xb23fc000
Try ATAPI send 25
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f76a3a60)
  assume IN
AtapiSendCommand: zero/unaligned transfer 8, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 25
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f76a3a60 Command 0x25 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x8.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f76a3a30
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x51
  base status 0x51
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x51)
AtapiInterrupt: iReason 3
AtapiInterrupt: Error 0x24
  Bad Lba 0x0
  wait 10 ready after ATAPI error
  Intr on DRQ 0
AtapiInterrupt: ATAPI Error, int reason 3
Errors in PIO mode
AtapiInterrupt: Error
AtapiInterrupt: CompleteRequest, srbstatus 4
AtapiInterrupt: Error. Begin mapping...
MapError: Error register is 0x24
ATAPI: Device not ready
AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xf76a3a30, status 4
AtapiInterrupt: RequestComplete, srb 0xf76a3a30
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb23a1550, CDB 0xb23a1580, AtaReq 0xb23fc000, SCmd 0x3
UniataNeedQueueing: TopLevel, qd=0
Send to device 3
TopLevel (2), srb 0xb23a1550
TopLevel (3), AtaReq 0xb23fc000
Try ATAPI send 3
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b23a1580)
  assume IN
AtapiSendCommand: SCSIOP_REQUEST_SENSE, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 3
AtapiSendCommand: SCSIOP_REQUEST_SENSE -> no dma setup (2)
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b23a1580 Command 0x3 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x51
  continue with SCSIOP_REQUEST_SENSE
AtapiSendCommand: Entry Status (0x51)
AtapiSendCommand: F:0x0, CntHL:0x0:0x12.
AtapiSendCommand: Poll for int. to send packet. Status (0x51)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b23a1550
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x12
IdeIntr: Read 0x9 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf76841a8, srb->DataBuffer 0xf76841a8
70 00 02 00 00 00 00 0a 00 00 00 00 3a 00 00 00 
00 00 
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf76841ba, srb->DataBuffer 0xf76841a8, len 0x12
   Transfered 12, full size 12
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xb23a1550, status 1
AtapiInterrupt: RequestComplete, srb 0xb23a1550
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
(../ntoskrnl/io/iomgr/file.c:554) Using IopParseDevice() hack. Requested invalid attributes: 1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb26732b0, CDB 0xb26732e0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb26732b0
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f7685100, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f7685100)
AtapiVirtToPhysAddr_: f7685100 -> 00000000:00ee0100
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b26732b0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb26732b0, status 1
AtapiInterrupt: RequestComplete, srb 0xb26732b0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(../base/setup/usetup/partlist.c:1308) Buffer size: 136
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb26732b0, CDB 0xb26732e0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb26732b0
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a36d8
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f7685000, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f7685000)
AtapiVirtToPhysAddr_: f7685000 -> 00000000:04c78000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b26732b0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb26732b0, status 1
AtapiInterrupt: RequestComplete, srb 0xb26732b0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(../drivers/storage/class/disk/disk.c:2252) HACK: Handling partition 0 request!
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb26732b0, CDB 0xb26732e0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb26732b0
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3740
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f7685a58, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f7685a58)
AtapiVirtToPhysAddr_: f7685a58 -> 00000000:04c82a58
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b26732b0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb26732b0, status 1
AtapiInterrupt: RequestComplete, srb 0xb26732b0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(../base/setup/usetup/partlist.c:1342) PartitionCount: 4
(../base/setup/usetup/partlist.c:3159) We are here (1)!
(../base/setup/usetup/partlist.c:3201) We are here (2)!
(../base/setup/usetup/partlist.c:3248) We are here (3)!
(../base/setup/usetup/partlist.c:3274) Found active system partition 3 in disk 1, drive letter E
(../base/setup/usetup/fslist.c:105) File system not found, try to guess one...
(../base/setup/usetup/fslist.c:146) Recognized file system NTFS that doesn't support write support yet!
(../base/setup/usetup/fslist.c:149) GetFileSystem -- PartitionType: 0x07 ; FileSystemName (guessed): NTFS
(../base/setup/usetup/partlist.c:3313) System partition 3 in disk 1 with no FS?!
(../base/setup/usetup/partlist.c:3356) Use alternative active system partition 1 in disk 1, drive letter C
(../base/setup/usetup/interface/usetup.c:2608) FormatState: Start --> FormatInstallPartition
(../base/setup/usetup/partlist.c:3155) Use the current system partition 1 in disk 1, drive letter C
(../base/setup/usetup/interface/usetup.c:2633) FormatState: FormatInstallPartition --> FormatDone
(../base/setup/usetup/fslist.c:105) File system not found, try to guess one...
(../base/setup/usetup/fslist.c:149) GetFileSystem -- PartitionType: 0x0B ; FileSystemName (guessed): FAT
(../base/setup/usetup/interface/usetup.c:3117) CheckFileSystemPage -- PartitionType: 0x0B ; FileSystemName: FAT
(../ntoskrnl/io/iomgr/file.c:554) Using IopParseDevice() hack. Requested invalid attributes: 11f
(../sdk/lib/fslib/vfatlib/check/io.c:233) NtFsControlFile() failed with Status 0xc0000010
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76854d8, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76854d8)
AtapiVirtToPhysAddr_: f76854d8 -> 00000000:00ee04d8
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x3f count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3b0ffe, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3b0ffe, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76854d8, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76854d8)
AtapiVirtToPhysAddr_: f76854d8 -> 00000000:00ee04d8
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x3b0ffe, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x3b0ffe count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 45, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 45, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76854d8, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76854d8)
AtapiVirtToPhysAddr_: f76854d8 -> 00000000:00ee04d8
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x45, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x45 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 40, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 40, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76854d8, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76854d8)
AtapiVirtToPhysAddr_: f76854d8 -> 00000000:00ee04d8
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x40, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x40 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(../sdk/lib/fslib/vfatlib/vfatlib.c:354) VfatPrint -- Starting check/repair pass.
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 5f, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 5f, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f747c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f747c020)
AtapiVirtToPhysAddr_: f747c020 -> 00000000:2c67e020
  get Phys(data[n=1+fe0]=f747d000)
AtapiVirtToPhysAddr_: f747d000 -> 00000000:2c67f000
  get Phys(data[n=1+1fe0]=f747e000)
AtapiVirtToPhysAddr_: f747e000 -> 00000000:2c678000
  get Phys(data[n=2+1000]=f747f000)
AtapiVirtToPhysAddr_: f747f000 -> 00000000:2c679000
  get Phys(data[n=2+2000]=f7480000)
AtapiVirtToPhysAddr_: f7480000 -> 00000000:2c67a000
  get Phys(data[n=2+3000]=f7481000)
AtapiVirtToPhysAddr_: f7481000 -> 00000000:2c683000
  get Phys(data[n=3+1000]=f7482000)
AtapiVirtToPhysAddr_: f7482000 -> 00000000:2c67c000
  get Phys(data[n=4+1000]=f7483000)
AtapiVirtToPhysAddr_: f7483000 -> 00000000:2c675000
  get Phys(data[n=5+1000]=f7484000)
AtapiVirtToPhysAddr_: f7484000 -> 00000000:2c676000
  get Phys(data[n=5+2000]=f7485000)
AtapiVirtToPhysAddr_: f7485000 -> 00000000:2c677000
  get Phys(data[n=5+3000]=f7486000)
AtapiVirtToPhysAddr_: f7486000 -> 00000000:2c670000
  get Phys(data[n=6+1000]=f7487000)
AtapiVirtToPhysAddr_: f7487000 -> 00000000:2c671000
  get Phys(data[n=6+2000]=f7488000)
AtapiVirtToPhysAddr_: f7488000 -> 00000000:2c672000
  get Phys(data[n=6+3000]=f7489000)
AtapiVirtToPhysAddr_: f7489000 -> 00000000:2c67b000
  get Phys(data[n=7+1000]=f748a000)
AtapiVirtToPhysAddr_: f748a000 -> 00000000:2c674000
  get Phys(data[n=8+1000]=f748b000)
AtapiVirtToPhysAddr_: f748b000 -> 00000000:2c66d000
  get Phys(data[n=9+1000]=f748c000)
AtapiVirtToPhysAddr_: f748c000 -> 00000000:2c66e000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x5f, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x5f count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector df, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is df, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f748c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f748c020)
AtapiVirtToPhysAddr_: f748c020 -> 00000000:2c66e020
  get Phys(data[n=1+fe0]=f748d000)
AtapiVirtToPhysAddr_: f748d000 -> 00000000:2c66f000
  get Phys(data[n=1+1fe0]=f748e000)
AtapiVirtToPhysAddr_: f748e000 -> 00000000:2c668000
  get Phys(data[n=2+1000]=f748f000)
AtapiVirtToPhysAddr_: f748f000 -> 00000000:2c669000
  get Phys(data[n=2+2000]=f7490000)
AtapiVirtToPhysAddr_: f7490000 -> 00000000:2c66a000
  get Phys(data[n=2+3000]=f7491000)
AtapiVirtToPhysAddr_: f7491000 -> 00000000:2c673000
  get Phys(data[n=3+1000]=f7492000)
AtapiVirtToPhysAddr_: f7492000 -> 00000000:2c66c000
  get Phys(data[n=4+1000]=f7493000)
AtapiVirtToPhysAddr_: f7493000 -> 00000000:2c665000
  get Phys(data[n=5+1000]=f7494000)
AtapiVirtToPhysAddr_: f7494000 -> 00000000:2c666000
  get Phys(data[n=5+2000]=f7495000)
AtapiVirtToPhysAddr_: f7495000 -> 00000000:2c667000
  get Phys(data[n=5+3000]=f7496000)
AtapiVirtToPhysAddr_: f7496000 -> 00000000:2c660000
  get Phys(data[n=6+1000]=f7497000)
AtapiVirtToPhysAddr_: f7497000 -> 00000000:2c661000
  get Phys(data[n=6+2000]=f7498000)
AtapiVirtToPhysAddr_: f7498000 -> 00000000:2c662000
  get Phys(data[n=6+3000]=f7499000)
AtapiVirtToPhysAddr_: f7499000 -> 00000000:2c66b000
  get Phys(data[n=7+1000]=f749a000)
AtapiVirtToPhysAddr_: f749a000 -> 00000000:2c664000
  get Phys(data[n=8+1000]=f749b000)
AtapiVirtToPhysAddr_: f749b000 -> 00000000:2c65d000
  get Phys(data[n=9+1000]=f749c000)
AtapiVirtToPhysAddr_: f749c000 -> 00000000:2c65e000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0xdf, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0xdf count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 15f, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 15f, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f749c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f749c020)
AtapiVirtToPhysAddr_: f749c020 -> 00000000:2c65e020
  get Phys(data[n=1+fe0]=f749d000)
AtapiVirtToPhysAddr_: f749d000 -> 00000000:2c65f000
  get Phys(data[n=1+1fe0]=f749e000)
AtapiVirtToPhysAddr_: f749e000 -> 00000000:2c658000
  get Phys(data[n=2+1000]=f749f000)
AtapiVirtToPhysAddr_: f749f000 -> 00000000:2c659000
  get Phys(data[n=2+2000]=f74a0000)
AtapiVirtToPhysAddr_: f74a0000 -> 00000000:2c65a000
  get Phys(data[n=2+3000]=f74a1000)
AtapiVirtToPhysAddr_: f74a1000 -> 00000000:2c663000
  get Phys(data[n=3+1000]=f74a2000)
AtapiVirtToPhysAddr_: f74a2000 -> 00000000:2c65c000
  get Phys(data[n=4+1000]=f74a3000)
AtapiVirtToPhysAddr_: f74a3000 -> 00000000:2c655000
  get Phys(data[n=5+1000]=f74a4000)
AtapiVirtToPhysAddr_: f74a4000 -> 00000000:2c656000
  get Phys(data[n=5+2000]=f74a5000)
AtapiVirtToPhysAddr_: f74a5000 -> 00000000:2c657000
  get Phys(data[n=5+3000]=f74a6000)
AtapiVirtToPhysAddr_: f74a6000 -> 00000000:2c650000
  get Phys(data[n=6+1000]=f74a7000)
AtapiVirtToPhysAddr_: f74a7000 -> 00000000:2c651000
  get Phys(data[n=6+2000]=f74a8000)
AtapiVirtToPhysAddr_: f74a8000 -> 00000000:2c652000
  get Phys(data[n=6+3000]=f74a9000)
AtapiVirtToPhysAddr_: f74a9000 -> 00000000:2c65b000
  get Phys(data[n=7+1000]=f74aa000)
AtapiVirtToPhysAddr_: f74aa000 -> 00000000:2c64c000
  get Phys(data[n=8+1000]=f74ab000)
AtapiVirtToPhysAddr_: f74ab000 -> 00000000:2c64d000
  get Phys(data[n=8+2000]=f74ac000)
AtapiVirtToPhysAddr_: f74ac000 -> 00000000:2c64e000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x15f, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x15f count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 1df, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f74ac020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f74ac020)
AtapiVirtToPhysAddr_: f74ac020 -> 00000000:2c64e020
  get Phys(data[n=1+fe0]=f74ad000)
AtapiVirtToPhysAddr_: f74ad000 -> 00000000:2c64f000
  get Phys(data[n=1+1fe0]=f74ae000)
AtapiVirtToPhysAddr_: f74ae000 -> 00000000:2c648000
  get Phys(data[n=2+1000]=f74af000)
AtapiVirtToPhysAddr_: f74af000 -> 00000000:2c649000
  get Phys(data[n=2+2000]=f74b0000)
AtapiVirtToPhysAddr_: f74b0000 -> 00000000:2c64a000
  get Phys(data[n=2+3000]=f74b1000)
AtapiVirtToPhysAddr_: f74b1000 -> 00000000:2c64b000
  get Phys(data[n=2+4000]=f74b2000)
AtapiVirtToPhysAddr_: f74b2000 -> 00000000:2c644000
  get Phys(data[n=3+1000]=f74b3000)
AtapiVirtToPhysAddr_: f74b3000 -> 00000000:2c645000
  get Phys(data[n=3+2000]=f74b4000)
AtapiVirtToPhysAddr_: f74b4000 -> 00000000:2c646000
  get Phys(data[n=3+3000]=f74b5000)
AtapiVirtToPhysAddr_: f74b5000 -> 00000000:2c647000
  get Phys(data[n=3+4000]=f74b6000)
AtapiVirtToPhysAddr_: f74b6000 -> 00000000:2c640000
  get Phys(data[n=4+1000]=f74b7000)
AtapiVirtToPhysAddr_: f74b7000 -> 00000000:2c641000
  get Phys(data[n=4+2000]=f74b8000)
AtapiVirtToPhysAddr_: f74b8000 -> 00000000:2c642000
  get Phys(data[n=4+3000]=f74b9000)
AtapiVirtToPhysAddr_: f74b9000 -> 00000000:2c643000
  get Phys(data[n=4+4000]=f74ba000)
AtapiVirtToPhysAddr_: f74ba000 -> 00000000:2c63c000
  get Phys(data[n=5+1000]=f74bb000)
AtapiVirtToPhysAddr_: f74bb000 -> 00000000:2c63d000
  get Phys(data[n=5+2000]=f74bc000)
AtapiVirtToPhysAddr_: f74bc000 -> 00000000:2c63e000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 25f, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 25f, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f74bc020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f74bc020)
AtapiVirtToPhysAddr_: f74bc020 -> 00000000:2c63e020
  get Phys(data[n=1+fe0]=f74bd000)
AtapiVirtToPhysAddr_: f74bd000 -> 00000000:2c63f000
  get Phys(data[n=1+1fe0]=f74be000)
AtapiVirtToPhysAddr_: f74be000 -> 00000000:2c638000
  get Phys(data[n=2+1000]=f74bf000)
AtapiVirtToPhysAddr_: f74bf000 -> 00000000:2c639000
  get Phys(data[n=2+2000]=f74c0000)
AtapiVirtToPhysAddr_: f74c0000 -> 00000000:2c63a000
  get Phys(data[n=2+3000]=f74c1000)
AtapiVirtToPhysAddr_: f74c1000 -> 00000000:2c63b000
  get Phys(data[n=2+4000]=f74c2000)
AtapiVirtToPhysAddr_: f74c2000 -> 00000000:2c634000
  get Phys(data[n=3+1000]=f74c3000)
AtapiVirtToPhysAddr_: f74c3000 -> 00000000:2c635000
  get Phys(data[n=3+2000]=f74c4000)
AtapiVirtToPhysAddr_: f74c4000 -> 00000000:2c636000
  get Phys(data[n=3+3000]=f74c5000)
AtapiVirtToPhysAddr_: f74c5000 -> 00000000:2c637000
  get Phys(data[n=3+4000]=f74c6000)
AtapiVirtToPhysAddr_: f74c6000 -> 00000000:2c630000
  get Phys(data[n=4+1000]=f74c7000)
AtapiVirtToPhysAddr_: f74c7000 -> 00000000:2c631000
  get Phys(data[n=4+2000]=f74c8000)
AtapiVirtToPhysAddr_: f74c8000 -> 00000000:2c632000
  get Phys(data[n=4+3000]=f74c9000)
AtapiVirtToPhysAddr_: f74c9000 -> 00000000:2c633000
  get Phys(data[n=4+4000]=f74ca000)
AtapiVirtToPhysAddr_: f74ca000 -> 00000000:2c62c000
  get Phys(data[n=5+1000]=f74cb000)
AtapiVirtToPhysAddr_: f74cb000 -> 00000000:2c62d000
  get Phys(data[n=5+2000]=f74cc000)
AtapiVirtToPhysAddr_: f74cc000 -> 00000000:2c62e000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x25f, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x25f count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 2df, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 2df, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f74cc020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f74cc020)
AtapiVirtToPhysAddr_: f74cc020 -> 00000000:2c62e020
  get Phys(data[n=1+fe0]=f74cd000)
AtapiVirtToPhysAddr_: f74cd000 -> 00000000:2c62f000
  get Phys(data[n=1+1fe0]=f74ce000)
AtapiVirtToPhysAddr_: f74ce000 -> 00000000:2c628000
  get Phys(data[n=2+1000]=f74cf000)
AtapiVirtToPhysAddr_: f74cf000 -> 00000000:2c629000
  get Phys(data[n=2+2000]=f74d0000)
AtapiVirtToPhysAddr_: f74d0000 -> 00000000:2c62a000
  get Phys(data[n=2+3000]=f74d1000)
AtapiVirtToPhysAddr_: f74d1000 -> 00000000:2c62b000
  get Phys(data[n=2+4000]=f74d2000)
AtapiVirtToPhysAddr_: f74d2000 -> 00000000:2c624000
  get Phys(data[n=3+1000]=f74d3000)
AtapiVirtToPhysAddr_: f74d3000 -> 00000000:2c625000
  get Phys(data[n=3+2000]=f74d4000)
AtapiVirtToPhysAddr_: f74d4000 -> 00000000:2c626000
  get Phys(data[n=3+3000]=f74d5000)
AtapiVirtToPhysAddr_: f74d5000 -> 00000000:2c627000
  get Phys(data[n=3+4000]=f74d6000)
AtapiVirtToPhysAddr_: f74d6000 -> 00000000:2c620000
  get Phys(data[n=4+1000]=f74d7000)
AtapiVirtToPhysAddr_: f74d7000 -> 00000000:2c621000
  get Phys(data[n=4+2000]=f74d8000)
AtapiVirtToPhysAddr_: f74d8000 -> 00000000:2c622000
  get Phys(data[n=4+3000]=f74d9000)
AtapiVirtToPhysAddr_: f74d9000 -> 00000000:2c623000
  get Phys(data[n=4+4000]=f74da000)
AtapiVirtToPhysAddr_: f74da000 -> 00000000:2c61c000
  get Phys(data[n=5+1000]=f74db000)
AtapiVirtToPhysAddr_: f74db000 -> 00000000:2c61d000
  get Phys(data[n=5+2000]=f74dc000)
AtapiVirtToPhysAddr_: f74dc000 -> 00000000:2c61e000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x2df, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x2df count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 35f, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 35f, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f74dc020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f74dc020)
AtapiVirtToPhysAddr_: f74dc020 -> 00000000:2c61e020
  get Phys(data[n=1+fe0]=f74dd000)
AtapiVirtToPhysAddr_: f74dd000 -> 00000000:2c61f000
  get Phys(data[n=1+1fe0]=f74de000)
AtapiVirtToPhysAddr_: f74de000 -> 00000000:2c618000
  get Phys(data[n=2+1000]=f74df000)
AtapiVirtToPhysAddr_: f74df000 -> 00000000:2c619000
  get Phys(data[n=2+2000]=f74e0000)
AtapiVirtToPhysAddr_: f74e0000 -> 00000000:2c61a000
  get Phys(data[n=2+3000]=f74e1000)
AtapiVirtToPhysAddr_: f74e1000 -> 00000000:2c61b000
  get Phys(data[n=2+4000]=f74e2000)
AtapiVirtToPhysAddr_: f74e2000 -> 00000000:2c614000
  get Phys(data[n=3+1000]=f74e3000)
AtapiVirtToPhysAddr_: f74e3000 -> 00000000:2c615000
  get Phys(data[n=3+2000]=f74e4000)
AtapiVirtToPhysAddr_: f74e4000 -> 00000000:2c616000
  get Phys(data[n=3+3000]=f74e5000)
AtapiVirtToPhysAddr_: f74e5000 -> 00000000:2c617000
  get Phys(data[n=3+4000]=f74e6000)
AtapiVirtToPhysAddr_: f74e6000 -> 00000000:2c610000
  get Phys(data[n=4+1000]=f74e7000)
AtapiVirtToPhysAddr_: f74e7000 -> 00000000:2c611000
  get Phys(data[n=4+2000]=f74e8000)
AtapiVirtToPhysAddr_: f74e8000 -> 00000000:2c612000
  get Phys(data[n=4+3000]=f74e9000)
AtapiVirtToPhysAddr_: f74e9000 -> 00000000:2c613000
  get Phys(data[n=4+4000]=f74ea000)
AtapiVirtToPhysAddr_: f74ea000 -> 00000000:3d3c4000
  get Phys(data[n=5+1000]=f74eb000)
AtapiVirtToPhysAddr_: f74eb000 -> 00000000:3d3c5000
  get Phys(data[n=5+2000]=f74ec000)
AtapiVirtToPhysAddr_: f74ec000 -> 00000000:3d3be000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x35f, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x35f count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3df, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3df, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f74ec020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f74ec020)
AtapiVirtToPhysAddr_: f74ec020 -> 00000000:3d3be020
  get Phys(data[n=1+fe0]=f74ed000)
AtapiVirtToPhysAddr_: f74ed000 -> 00000000:3d3bf000
  get Phys(data[n=1+1fe0]=f74ee000)
AtapiVirtToPhysAddr_: f74ee000 -> 00000000:3d3c0000
  get Phys(data[n=2+1000]=f74ef000)
AtapiVirtToPhysAddr_: f74ef000 -> 00000000:3d3c1000
  get Phys(data[n=2+2000]=f74f0000)
AtapiVirtToPhysAddr_: f74f0000 -> 00000000:3d3ca000
  get Phys(data[n=3+1000]=f74f1000)
AtapiVirtToPhysAddr_: f74f1000 -> 00000000:3d3c3000
  get Phys(data[n=4+1000]=f74f2000)
AtapiVirtToPhysAddr_: f74f2000 -> 00000000:3d3bc000
  get Phys(data[n=5+1000]=f74f3000)
AtapiVirtToPhysAddr_: f74f3000 -> 00000000:3d3bd000
  get Phys(data[n=5+2000]=f74f4000)
AtapiVirtToPhysAddr_: f74f4000 -> 00000000:3d3b6000
  get Phys(data[n=6+1000]=f74f5000)
AtapiVirtToPhysAddr_: f74f5000 -> 00000000:3d3b7000
  get Phys(data[n=6+2000]=f74f6000)
AtapiVirtToPhysAddr_: f74f6000 -> 00000000:3d3b8000
  get Phys(data[n=6+3000]=f74f7000)
AtapiVirtToPhysAddr_: f74f7000 -> 00000000:3d3b9000
  get Phys(data[n=6+4000]=f74f8000)
AtapiVirtToPhysAddr_: f74f8000 -> 00000000:3d3c2000
  get Phys(data[n=7+1000]=f74f9000)
AtapiVirtToPhysAddr_: f74f9000 -> 00000000:3d3bb000
  get Phys(data[n=8+1000]=f74fa000)
AtapiVirtToPhysAddr_: f74fa000 -> 00000000:3d3b4000
  get Phys(data[n=9+1000]=f74fb000)
AtapiVirtToPhysAddr_: f74fb000 -> 00000000:3d3b5000
  get Phys(data[n=9+2000]=f74fc000)
AtapiVirtToPhysAddr_: f74fc000 -> 00000000:3d3ae000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x3df, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x3df count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 45f, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 45f, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f74fc020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f74fc020)
AtapiVirtToPhysAddr_: f74fc020 -> 00000000:3d3ae020
  get Phys(data[n=1+fe0]=f74fd000)
AtapiVirtToPhysAddr_: f74fd000 -> 00000000:3d3af000
  get Phys(data[n=1+1fe0]=f74fe000)
AtapiVirtToPhysAddr_: f74fe000 -> 00000000:3d3b0000
  get Phys(data[n=2+1000]=f74ff000)
AtapiVirtToPhysAddr_: f74ff000 -> 00000000:3d3b1000
  get Phys(data[n=2+2000]=f7500000)
AtapiVirtToPhysAddr_: f7500000 -> 00000000:3d3ba000
  get Phys(data[n=3+1000]=f7501000)
AtapiVirtToPhysAddr_: f7501000 -> 00000000:3d3b3000
  get Phys(data[n=4+1000]=f7502000)
AtapiVirtToPhysAddr_: f7502000 -> 00000000:3d3ac000
  get Phys(data[n=5+1000]=f7503000)
AtapiVirtToPhysAddr_: f7503000 -> 00000000:3d3ad000
  get Phys(data[n=5+2000]=f7504000)
AtapiVirtToPhysAddr_: f7504000 -> 00000000:3d3a6000
  get Phys(data[n=6+1000]=f7505000)
AtapiVirtToPhysAddr_: f7505000 -> 00000000:3d3a7000
  get Phys(data[n=6+2000]=f7506000)
AtapiVirtToPhysAddr_: f7506000 -> 00000000:3d3a8000
  get Phys(data[n=6+3000]=f7507000)
AtapiVirtToPhysAddr_: f7507000 -> 00000000:3d3a9000
  get Phys(data[n=6+4000]=f7508000)
AtapiVirtToPhysAddr_: f7508000 -> 00000000:3d3b2000
  get Phys(data[n=7+1000]=f7509000)
AtapiVirtToPhysAddr_: f7509000 -> 00000000:3d3ab000
  get Phys(data[n=8+1000]=f750a000)
AtapiVirtToPhysAddr_: f750a000 -> 00000000:3d3a4000
  get Phys(data[n=9+1000]=f750b000)
AtapiVirtToPhysAddr_: f750b000 -> 00000000:3d3a5000
  get Phys(data[n=9+2000]=f750c000)
AtapiVirtToPhysAddr_: f750c000 -> 00000000:3d39e000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x45f, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x45f count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 4df, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 4df, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f750c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f750c020)
AtapiVirtToPhysAddr_: f750c020 -> 00000000:3d39e020
  get Phys(data[n=1+fe0]=f750d000)
AtapiVirtToPhysAddr_: f750d000 -> 00000000:3d39f000
  get Phys(data[n=1+1fe0]=f750e000)
AtapiVirtToPhysAddr_: f750e000 -> 00000000:3d3a0000
  get Phys(data[n=2+1000]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:3d3a1000
  get Phys(data[n=2+2000]=f7510000)
AtapiVirtToPhysAddr_: f7510000 -> 00000000:3d3aa000
  get Phys(data[n=3+1000]=f7511000)
AtapiVirtToPhysAddr_: f7511000 -> 00000000:3d3a3000
  get Phys(data[n=4+1000]=f7512000)
AtapiVirtToPhysAddr_: f7512000 -> 00000000:3d39c000
  get Phys(data[n=5+1000]=f7513000)
AtapiVirtToPhysAddr_: f7513000 -> 00000000:3d39d000
  get Phys(data[n=5+2000]=f7514000)
AtapiVirtToPhysAddr_: f7514000 -> 00000000:3d396000
  get Phys(data[n=6+1000]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:3d397000
  get Phys(data[n=6+2000]=f7516000)
AtapiVirtToPhysAddr_: f7516000 -> 00000000:3d398000
  get Phys(data[n=6+3000]=f7517000)
AtapiVirtToPhysAddr_: f7517000 -> 00000000:3d399000
  get Phys(data[n=6+4000]=f7518000)
AtapiVirtToPhysAddr_: f7518000 -> 00000000:3d3a2000
  get Phys(data[n=7+1000]=f7519000)
AtapiVirtToPhysAddr_: f7519000 -> 00000000:3d39b000
  get Phys(data[n=8+1000]=f751a000)
AtapiVirtToPhysAddr_: f751a000 -> 00000000:3d394000
  get Phys(data[n=9+1000]=f751b000)
AtapiVirtToPhysAddr_: f751b000 -> 00000000:3d395000
  get Phys(data[n=9+2000]=f751c000)
AtapiVirtToPhysAddr_: f751c000 -> 00000000:3d38e000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x4df, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x4df count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 55f, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 55f, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f751c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f751c020)
AtapiVirtToPhysAddr_: f751c020 -> 00000000:3d38e020
  get Phys(data[n=1+fe0]=f751d000)
AtapiVirtToPhysAddr_: f751d000 -> 00000000:3d38f000
  get Phys(data[n=1+1fe0]=f751e000)
AtapiVirtToPhysAddr_: f751e000 -> 00000000:3d390000
  get Phys(data[n=2+1000]=f751f000)
AtapiVirtToPhysAddr_: f751f000 -> 00000000:3d391000
  get Phys(data[n=2+2000]=f7520000)
AtapiVirtToPhysAddr_: f7520000 -> 00000000:3d39a000
  get Phys(data[n=3+1000]=f7521000)
AtapiVirtToPhysAddr_: f7521000 -> 00000000:3d393000
  get Phys(data[n=4+1000]=f7522000)
AtapiVirtToPhysAddr_: f7522000 -> 00000000:3d38c000
  get Phys(data[n=5+1000]=f7523000)
AtapiVirtToPhysAddr_: f7523000 -> 00000000:3d38d000
  get Phys(data[n=5+2000]=f7524000)
AtapiVirtToPhysAddr_: f7524000 -> 00000000:3d386000
  get Phys(data[n=6+1000]=f7525000)
AtapiVirtToPhysAddr_: f7525000 -> 00000000:3d387000
  get Phys(data[n=6+2000]=f7526000)
AtapiVirtToPhysAddr_: f7526000 -> 00000000:3d388000
  get Phys(data[n=6+3000]=f7527000)
AtapiVirtToPhysAddr_: f7527000 -> 00000000:3d389000
  get Phys(data[n=6+4000]=f7528000)
AtapiVirtToPhysAddr_: f7528000 -> 00000000:3d392000
  get Phys(data[n=7+1000]=f7529000)
AtapiVirtToPhysAddr_: f7529000 -> 00000000:3d38b000
  get Phys(data[n=8+1000]=f752a000)
AtapiVirtToPhysAddr_: f752a000 -> 00000000:3f3d4000
  get Phys(data[n=9+1000]=f752b000)
AtapiVirtToPhysAddr_: f752b000 -> 00000000:3f3d5000
  get Phys(data[n=9+2000]=f752c000)
AtapiVirtToPhysAddr_: f752c000 -> 00000000:3f3d6000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x55f, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x55f count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 5df, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 5df, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f752c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f752c020)
AtapiVirtToPhysAddr_: f752c020 -> 00000000:3f3d6020
  get Phys(data[n=1+fe0]=f752d000)
AtapiVirtToPhysAddr_: f752d000 -> 00000000:3f17f000
  get Phys(data[n=2+1000]=f752e000)
AtapiVirtToPhysAddr_: f752e000 -> 00000000:3f180000
  get Phys(data[n=3+1000]=f752f000)
AtapiVirtToPhysAddr_: f752f000 -> 00000000:3f3d9000
  get Phys(data[n=4+1000]=f7530000)
AtapiVirtToPhysAddr_: f7530000 -> 00000000:3f3da000
  get Phys(data[n=4+2000]=f7531000)
AtapiVirtToPhysAddr_: f7531000 -> 00000000:3f3e3000
  get Phys(data[n=5+1000]=f7532000)
AtapiVirtToPhysAddr_: f7532000 -> 00000000:3f3cc000
  get Phys(data[n=6+1000]=f7533000)
AtapiVirtToPhysAddr_: f7533000 -> 00000000:3f3cd000
  get Phys(data[n=6+2000]=f7534000)
AtapiVirtToPhysAddr_: f7534000 -> 00000000:3f3ce000
  get Phys(data[n=6+3000]=f7535000)
AtapiVirtToPhysAddr_: f7535000 -> 00000000:3f3d7000
  get Phys(data[n=7+1000]=f7536000)
AtapiVirtToPhysAddr_: f7536000 -> 00000000:3f3d8000
  get Phys(data[n=7+2000]=f7537000)
AtapiVirtToPhysAddr_: f7537000 -> 00000000:3f3d1000
  get Phys(data[n=8+1000]=f7538000)
AtapiVirtToPhysAddr_: f7538000 -> 00000000:3f3d2000
  get Phys(data[n=8+2000]=f7539000)
AtapiVirtToPhysAddr_: f7539000 -> 00000000:3f3db000
  get Phys(data[n=9+1000]=f753a000)
AtapiVirtToPhysAddr_: f753a000 -> 00000000:3f3c4000
  get Phys(data[n=10+1000]=f753b000)
AtapiVirtToPhysAddr_: f753b000 -> 00000000:3f3c5000
  get Phys(data[n=10+2000]=f753c000)
AtapiVirtToPhysAddr_: f753c000 -> 00000000:3f3c6000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x5df, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x5df count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 65f, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 65f, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f753c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f753c020)
AtapiVirtToPhysAddr_: f753c020 -> 00000000:3f3c6020
  get Phys(data[n=1+fe0]=f753d000)
AtapiVirtToPhysAddr_: f753d000 -> 00000000:3f3cf000
  get Phys(data[n=2+1000]=f753e000)
AtapiVirtToPhysAddr_: f753e000 -> 00000000:3f3d0000
  get Phys(data[n=3+1000]=f753f000)
AtapiVirtToPhysAddr_: f753f000 -> 00000000:3f3c9000
  get Phys(data[n=4+1000]=f7540000)
AtapiVirtToPhysAddr_: f7540000 -> 00000000:3f3ca000
  get Phys(data[n=4+2000]=f7541000)
AtapiVirtToPhysAddr_: f7541000 -> 00000000:3f3d3000
  get Phys(data[n=5+1000]=f7542000)
AtapiVirtToPhysAddr_: f7542000 -> 00000000:3f3bc000
  get Phys(data[n=6+1000]=f7543000)
AtapiVirtToPhysAddr_: f7543000 -> 00000000:3f3bd000
  get Phys(data[n=6+2000]=f7544000)
AtapiVirtToPhysAddr_: f7544000 -> 00000000:3f3be000
  get Phys(data[n=6+3000]=f7545000)
AtapiVirtToPhysAddr_: f7545000 -> 00000000:3f3c7000
  get Phys(data[n=7+1000]=f7546000)
AtapiVirtToPhysAddr_: f7546000 -> 00000000:3f3c8000
  get Phys(data[n=7+2000]=f7547000)
AtapiVirtToPhysAddr_: f7547000 -> 00000000:3f3c1000
  get Phys(data[n=8+1000]=f7548000)
AtapiVirtToPhysAddr_: f7548000 -> 00000000:3f3c2000
  get Phys(data[n=8+2000]=f7549000)
AtapiVirtToPhysAddr_: f7549000 -> 00000000:3f3cb000
  get Phys(data[n=9+1000]=f754a000)
AtapiVirtToPhysAddr_: f754a000 -> 00000000:3f3b4000
  get Phys(data[n=10+1000]=f754b000)
AtapiVirtToPhysAddr_: f754b000 -> 00000000:3f3b5000
  get Phys(data[n=10+2000]=f754c000)
AtapiVirtToPhysAddr_: f754c000 -> 00000000:3f3b6000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x65f, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x65f count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 6df, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 6df, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f754c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f754c020)
AtapiVirtToPhysAddr_: f754c020 -> 00000000:3f3b6020
  get Phys(data[n=1+fe0]=f754d000)
AtapiVirtToPhysAddr_: f754d000 -> 00000000:3f3bf000
  get Phys(data[n=2+1000]=f754e000)
AtapiVirtToPhysAddr_: f754e000 -> 00000000:3f3c0000
  get Phys(data[n=3+1000]=f754f000)
AtapiVirtToPhysAddr_: f754f000 -> 00000000:3f3b9000
  get Phys(data[n=4+1000]=f7550000)
AtapiVirtToPhysAddr_: f7550000 -> 00000000:3f3ba000
  get Phys(data[n=4+2000]=f7551000)
AtapiVirtToPhysAddr_: f7551000 -> 00000000:3f3c3000
  get Phys(data[n=5+1000]=f7552000)
AtapiVirtToPhysAddr_: f7552000 -> 00000000:3f3ac000
  get Phys(data[n=6+1000]=f7553000)
AtapiVirtToPhysAddr_: f7553000 -> 00000000:3f3ad000
  get Phys(data[n=6+2000]=f7554000)
AtapiVirtToPhysAddr_: f7554000 -> 00000000:3f3ae000
  get Phys(data[n=6+3000]=f7555000)
AtapiVirtToPhysAddr_: f7555000 -> 00000000:3f3b7000
  get Phys(data[n=7+1000]=f7556000)
AtapiVirtToPhysAddr_: f7556000 -> 00000000:3f3b8000
  get Phys(data[n=7+2000]=f7557000)
AtapiVirtToPhysAddr_: f7557000 -> 00000000:3f3b1000
  get Phys(data[n=8+1000]=f7558000)
AtapiVirtToPhysAddr_: f7558000 -> 00000000:3f3b2000
  get Phys(data[n=8+2000]=f7559000)
AtapiVirtToPhysAddr_: f7559000 -> 00000000:3f3bb000
  get Phys(data[n=9+1000]=f755a000)
AtapiVirtToPhysAddr_: f755a000 -> 00000000:3f3a4000
  get Phys(data[n=10+1000]=f755b000)
AtapiVirtToPhysAddr_: f755b000 -> 00000000:3f3a5000
  get Phys(data[n=10+2000]=f755c000)
AtapiVirtToPhysAddr_: f755c000 -> 00000000:3f3a6000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x6df, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x6df count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 75f, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 75f, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f755c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f755c020)
AtapiVirtToPhysAddr_: f755c020 -> 00000000:3f3a6020
  get Phys(data[n=1+fe0]=f755d000)
AtapiVirtToPhysAddr_: f755d000 -> 00000000:3f3af000
  get Phys(data[n=2+1000]=f755e000)
AtapiVirtToPhysAddr_: f755e000 -> 00000000:3f3b0000
  get Phys(data[n=3+1000]=f755f000)
AtapiVirtToPhysAddr_: f755f000 -> 00000000:3f3a9000
  get Phys(data[n=4+1000]=f7560000)
AtapiVirtToPhysAddr_: f7560000 -> 00000000:3f3aa000
  get Phys(data[n=4+2000]=f7561000)
AtapiVirtToPhysAddr_: f7561000 -> 00000000:3f3b3000
  get Phys(data[n=5+1000]=f7562000)
AtapiVirtToPhysAddr_: f7562000 -> 00000000:3f39c000
  get Phys(data[n=6+1000]=f7563000)
AtapiVirtToPhysAddr_: f7563000 -> 00000000:3f39d000
  get Phys(data[n=6+2000]=f7564000)
AtapiVirtToPhysAddr_: f7564000 -> 00000000:3f39e000
  get Phys(data[n=6+3000]=f7565000)
AtapiVirtToPhysAddr_: f7565000 -> 00000000:3f3a7000
  get Phys(data[n=7+1000]=f7566000)
AtapiVirtToPhysAddr_: f7566000 -> 00000000:3f3a8000
  get Phys(data[n=7+2000]=f7567000)
AtapiVirtToPhysAddr_: f7567000 -> 00000000:3f3a1000
  get Phys(data[n=8+1000]=f7568000)
AtapiVirtToPhysAddr_: f7568000 -> 00000000:3f3a2000
  get Phys(data[n=8+2000]=f7569000)
AtapiVirtToPhysAddr_: f7569000 -> 00000000:3f3ab000
  get Phys(data[n=9+1000]=f756a000)
AtapiVirtToPhysAddr_: f756a000 -> 00000000:3f1c4000
  get Phys(data[n=10+1000]=f756b000)
AtapiVirtToPhysAddr_: f756b000 -> 00000000:3f1bd000
  get Phys(data[n=11+1000]=f756c000)
AtapiVirtToPhysAddr_: f756c000 -> 00000000:3f1be000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x75f, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x75f count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7df, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 7df, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f756c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f756c020)
AtapiVirtToPhysAddr_: f756c020 -> 00000000:3f1be020
  get Phys(data[n=1+fe0]=f756d000)
AtapiVirtToPhysAddr_: f756d000 -> 00000000:3f39f000
  get Phys(data[n=2+1000]=f756e000)
AtapiVirtToPhysAddr_: f756e000 -> 00000000:3f3a0000
  get Phys(data[n=3+1000]=f756f000)
AtapiVirtToPhysAddr_: f756f000 -> 00000000:3f1c1000
  get Phys(data[n=4+1000]=f7570000)
AtapiVirtToPhysAddr_: f7570000 -> 00000000:3f1c2000
  get Phys(data[n=4+2000]=f7571000)
AtapiVirtToPhysAddr_: f7571000 -> 00000000:3f1c3000
  get Phys(data[n=4+3000]=f7572000)
AtapiVirtToPhysAddr_: f7572000 -> 00000000:3f1bc000
  get Phys(data[n=5+1000]=f7573000)
AtapiVirtToPhysAddr_: f7573000 -> 00000000:3f1b5000
  get Phys(data[n=6+1000]=f7574000)
AtapiVirtToPhysAddr_: f7574000 -> 00000000:3f1b6000
  get Phys(data[n=6+2000]=f7575000)
AtapiVirtToPhysAddr_: f7575000 -> 00000000:3f1bf000
  get Phys(data[n=7+1000]=f7576000)
AtapiVirtToPhysAddr_: f7576000 -> 00000000:3f1c0000
  get Phys(data[n=8+1000]=f7577000)
AtapiVirtToPhysAddr_: f7577000 -> 00000000:3f1b9000
  get Phys(data[n=9+1000]=f7578000)
AtapiVirtToPhysAddr_: f7578000 -> 00000000:3f1ba000
  get Phys(data[n=9+2000]=f7579000)
AtapiVirtToPhysAddr_: f7579000 -> 00000000:3f1bb000
  get Phys(data[n=9+3000]=f757a000)
AtapiVirtToPhysAddr_: f757a000 -> 00000000:3f1b4000
  get Phys(data[n=10+1000]=f757b000)
AtapiVirtToPhysAddr_: f757b000 -> 00000000:3f1ad000
  get Phys(data[n=11+1000]=f757c000)
AtapiVirtToPhysAddr_: f757c000 -> 00000000:3f1ae000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x7df, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x7df count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 85f, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 85f, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f757c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f757c020)
AtapiVirtToPhysAddr_: f757c020 -> 00000000:3f1ae020
  get Phys(data[n=1+fe0]=f757d000)
AtapiVirtToPhysAddr_: f757d000 -> 00000000:3f1b7000
  get Phys(data[n=2+1000]=f757e000)
AtapiVirtToPhysAddr_: f757e000 -> 00000000:3f1b8000
  get Phys(data[n=2+2000]=f757f000)
AtapiVirtToPhysAddr_: f757f000 -> 00000000:3f1b1000
  get Phys(data[n=3+1000]=f7580000)
AtapiVirtToPhysAddr_: f7580000 -> 00000000:3f1b2000
  get Phys(data[n=3+2000]=f7581000)
AtapiVirtToPhysAddr_: f7581000 -> 00000000:3f1b3000
  get Phys(data[n=3+3000]=f7582000)
AtapiVirtToPhysAddr_: f7582000 -> 00000000:3f1ac000
  get Phys(data[n=4+1000]=f7583000)
AtapiVirtToPhysAddr_: f7583000 -> 00000000:3f1a5000
  get Phys(data[n=5+1000]=f7584000)
AtapiVirtToPhysAddr_: f7584000 -> 00000000:3f1a6000
  get Phys(data[n=5+2000]=f7585000)
AtapiVirtToPhysAddr_: f7585000 -> 00000000:3f1af000
  get Phys(data[n=6+1000]=f7586000)
AtapiVirtToPhysAddr_: f7586000 -> 00000000:3f1b0000
  get Phys(data[n=7+1000]=f7587000)
AtapiVirtToPhysAddr_: f7587000 -> 00000000:3f1a9000
  get Phys(data[n=8+1000]=f7588000)
AtapiVirtToPhysAddr_: f7588000 -> 00000000:3f1aa000
  get Phys(data[n=8+2000]=f7589000)
AtapiVirtToPhysAddr_: f7589000 -> 00000000:3f1ab000
  get Phys(data[n=8+3000]=f758a000)
AtapiVirtToPhysAddr_: f758a000 -> 00000000:3f1a4000
  get Phys(data[n=9+1000]=f758b000)
AtapiVirtToPhysAddr_: f758b000 -> 00000000:3f19d000
  get Phys(data[n=10+1000]=f758c000)
AtapiVirtToPhysAddr_: f758c000 -> 00000000:3f19e000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x85f, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x85f count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 8df, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 8df, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f758c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f758c020)
AtapiVirtToPhysAddr_: f758c020 -> 00000000:3f19e020
  get Phys(data[n=1+fe0]=f758d000)
AtapiVirtToPhysAddr_: f758d000 -> 00000000:3f1a7000
  get Phys(data[n=2+1000]=f758e000)
AtapiVirtToPhysAddr_: f758e000 -> 00000000:3f1a8000
  get Phys(data[n=2+2000]=f758f000)
AtapiVirtToPhysAddr_: f758f000 -> 00000000:3f1a1000
  get Phys(data[n=3+1000]=f7590000)
AtapiVirtToPhysAddr_: f7590000 -> 00000000:3f1a2000
  get Phys(data[n=3+2000]=f7591000)
AtapiVirtToPhysAddr_: f7591000 -> 00000000:3f1a3000
  get Phys(data[n=3+3000]=f7592000)
AtapiVirtToPhysAddr_: f7592000 -> 00000000:3f19c000
  get Phys(data[n=4+1000]=f7593000)
AtapiVirtToPhysAddr_: f7593000 -> 00000000:3f195000
  get Phys(data[n=5+1000]=f7594000)
AtapiVirtToPhysAddr_: f7594000 -> 00000000:3f196000
  get Phys(data[n=5+2000]=f7595000)
AtapiVirtToPhysAddr_: f7595000 -> 00000000:3f19f000
  get Phys(data[n=6+1000]=f7596000)
AtapiVirtToPhysAddr_: f7596000 -> 00000000:3f1a0000
  get Phys(data[n=7+1000]=f7597000)
AtapiVirtToPhysAddr_: f7597000 -> 00000000:3f199000
  get Phys(data[n=8+1000]=f7598000)
AtapiVirtToPhysAddr_: f7598000 -> 00000000:3f19a000
  get Phys(data[n=8+2000]=f7599000)
AtapiVirtToPhysAddr_: f7599000 -> 00000000:3f19b000
  get Phys(data[n=8+3000]=f759a000)
AtapiVirtToPhysAddr_: f759a000 -> 00000000:3f194000
  get Phys(data[n=9+1000]=f759b000)
AtapiVirtToPhysAddr_: f759b000 -> 00000000:3f18d000
  get Phys(data[n=10+1000]=f759c000)
AtapiVirtToPhysAddr_: f759c000 -> 00000000:3f18e000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x8df, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x8df count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 95f, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 95f, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f759c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f759c020)
AtapiVirtToPhysAddr_: f759c020 -> 00000000:3f18e020
  get Phys(data[n=1+fe0]=f759d000)
AtapiVirtToPhysAddr_: f759d000 -> 00000000:3f197000
  get Phys(data[n=2+1000]=f759e000)
AtapiVirtToPhysAddr_: f759e000 -> 00000000:3f198000
  get Phys(data[n=2+2000]=f759f000)
AtapiVirtToPhysAddr_: f759f000 -> 00000000:3f191000
  get Phys(data[n=3+1000]=f75a0000)
AtapiVirtToPhysAddr_: f75a0000 -> 00000000:3f192000
  get Phys(data[n=3+2000]=f75a1000)
AtapiVirtToPhysAddr_: f75a1000 -> 00000000:3f193000
  get Phys(data[n=3+3000]=f75a2000)
AtapiVirtToPhysAddr_: f75a2000 -> 00000000:3f18c000
  get Phys(data[n=4+1000]=f75a3000)
AtapiVirtToPhysAddr_: f75a3000 -> 00000000:3f185000
  get Phys(data[n=5+1000]=f75a4000)
AtapiVirtToPhysAddr_: f75a4000 -> 00000000:3f186000
  get Phys(data[n=5+2000]=f75a5000)
AtapiVirtToPhysAddr_: f75a5000 -> 00000000:3f18f000
  get Phys(data[n=6+1000]=f75a6000)
AtapiVirtToPhysAddr_: f75a6000 -> 00000000:3f190000
  get Phys(data[n=7+1000]=f75a7000)
AtapiVirtToPhysAddr_: f75a7000 -> 00000000:3f189000
  get Phys(data[n=8+1000]=f75a8000)
AtapiVirtToPhysAddr_: f75a8000 -> 00000000:3f18a000
  get Phys(data[n=8+2000]=f75a9000)
AtapiVirtToPhysAddr_: f75a9000 -> 00000000:3f18b000
  get Phys(data[n=8+3000]=f75aa000)
AtapiVirtToPhysAddr_: f75aa000 -> 00000000:3f384000
  get Phys(data[n=9+1000]=f75ab000)
AtapiVirtToPhysAddr_: f75ab000 -> 00000000:3f385000
  get Phys(data[n=9+2000]=f75ac000)
AtapiVirtToPhysAddr_: f75ac000 -> 00000000:3f386000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x95f, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x95f count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 9df, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 9df, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f75ac020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f75ac020)
AtapiVirtToPhysAddr_: f75ac020 -> 00000000:3f386020
  get Phys(data[n=1+fe0]=f75ad000)
AtapiVirtToPhysAddr_: f75ad000 -> 00000000:3f187000
  get Phys(data[n=2+1000]=f75ae000)
AtapiVirtToPhysAddr_: f75ae000 -> 00000000:3f188000
  get Phys(data[n=2+2000]=f75af000)
AtapiVirtToPhysAddr_: f75af000 -> 00000000:3f179000
  get Phys(data[n=3+1000]=f75b0000)
AtapiVirtToPhysAddr_: f75b0000 -> 00000000:3f17a000
  get Phys(data[n=3+2000]=f75b1000)
AtapiVirtToPhysAddr_: f75b1000 -> 00000000:3f383000
  get Phys(data[n=4+1000]=f75b2000)
AtapiVirtToPhysAddr_: f75b2000 -> 00000000:01174000
  get Phys(data[n=5+1000]=f75b3000)
AtapiVirtToPhysAddr_: f75b3000 -> 00000000:0117d000
  get Phys(data[n=6+1000]=f75b4000)
AtapiVirtToPhysAddr_: f75b4000 -> 00000000:0116e000
  get Phys(data[n=7+1000]=f75b5000)
AtapiVirtToPhysAddr_: f75b5000 -> 00000000:3f37f000
  get Phys(data[n=8+1000]=f75b6000)
AtapiVirtToPhysAddr_: f75b6000 -> 00000000:3f380000
  get Phys(data[n=9+1000]=f75b7000)
AtapiVirtToPhysAddr_: f75b7000 -> 00000000:3f381000
  get Phys(data[n=9+2000]=f75b8000)
AtapiVirtToPhysAddr_: f75b8000 -> 00000000:3f382000
  get Phys(data[n=9+3000]=f75b9000)
AtapiVirtToPhysAddr_: f75b9000 -> 00000000:0117b000
  get Phys(data[n=10+1000]=f75ba000)
AtapiVirtToPhysAddr_: f75ba000 -> 00000000:0116c000
  get Phys(data[n=11+1000]=f75bb000)
AtapiVirtToPhysAddr_: f75bb000 -> 00000000:01175000
  get Phys(data[n=12+1000]=f75bc000)
AtapiVirtToPhysAddr_: f75bc000 -> 00000000:01166000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x9df, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x9df count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector a5f, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is a5f, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f75bc020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f75bc020)
AtapiVirtToPhysAddr_: f75bc020 -> 00000000:01166020
  get Phys(data[n=1+fe0]=f75bd000)
AtapiVirtToPhysAddr_: f75bd000 -> 00000000:3f387000
  get Phys(data[n=2+1000]=f75be000)
AtapiVirtToPhysAddr_: f75be000 -> 00000000:3f388000
  get Phys(data[n=2+2000]=f75bf000)
AtapiVirtToPhysAddr_: f75bf000 -> 00000000:3f389000
  get Phys(data[n=2+3000]=f75c0000)
AtapiVirtToPhysAddr_: f75c0000 -> 00000000:3f38a000
  get Phys(data[n=2+4000]=f75c1000)
AtapiVirtToPhysAddr_: f75c1000 -> 00000000:01173000
  get Phys(data[n=3+1000]=f75c2000)
AtapiVirtToPhysAddr_: f75c2000 -> 00000000:01164000
  get Phys(data[n=4+1000]=f75c3000)
AtapiVirtToPhysAddr_: f75c3000 -> 00000000:0116d000
  get Phys(data[n=5+1000]=f75c4000)
AtapiVirtToPhysAddr_: f75c4000 -> 00000000:0115e000
  get Phys(data[n=6+1000]=f75c5000)
AtapiVirtToPhysAddr_: f75c5000 -> 00000000:0116f000
  get Phys(data[n=7+1000]=f75c6000)
AtapiVirtToPhysAddr_: f75c6000 -> 00000000:01170000
  get Phys(data[n=8+1000]=f75c7000)
AtapiVirtToPhysAddr_: f75c7000 -> 00000000:01171000
  get Phys(data[n=8+2000]=f75c8000)
AtapiVirtToPhysAddr_: f75c8000 -> 00000000:01172000
  get Phys(data[n=8+3000]=f75c9000)
AtapiVirtToPhysAddr_: f75c9000 -> 00000000:0116b000
  get Phys(data[n=9+1000]=f75ca000)
AtapiVirtToPhysAddr_: f75ca000 -> 00000000:0115c000
  get Phys(data[n=10+1000]=f75cb000)
AtapiVirtToPhysAddr_: f75cb000 -> 00000000:01165000
  get Phys(data[n=11+1000]=f75cc000)
AtapiVirtToPhysAddr_: f75cc000 -> 00000000:01156000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0xa5f, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0xa5f count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector adf, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is adf, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f75cc020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f75cc020)
AtapiVirtToPhysAddr_: f75cc020 -> 00000000:01156020
  get Phys(data[n=1+fe0]=f75cd000)
AtapiVirtToPhysAddr_: f75cd000 -> 00000000:01167000
  get Phys(data[n=2+1000]=f75ce000)
AtapiVirtToPhysAddr_: f75ce000 -> 00000000:01168000
  get Phys(data[n=2+2000]=f75cf000)
AtapiVirtToPhysAddr_: f75cf000 -> 00000000:01169000
  get Phys(data[n=2+3000]=f75d0000)
AtapiVirtToPhysAddr_: f75d0000 -> 00000000:0116a000
  get Phys(data[n=2+4000]=f75d1000)
AtapiVirtToPhysAddr_: f75d1000 -> 00000000:01163000
  get Phys(data[n=3+1000]=f75d2000)
AtapiVirtToPhysAddr_: f75d2000 -> 00000000:01154000
  get Phys(data[n=4+1000]=f75d3000)
AtapiVirtToPhysAddr_: f75d3000 -> 00000000:0115d000
  get Phys(data[n=5+1000]=f75d4000)
AtapiVirtToPhysAddr_: f75d4000 -> 00000000:0114e000
  get Phys(data[n=6+1000]=f75d5000)
AtapiVirtToPhysAddr_: f75d5000 -> 00000000:0115f000
  get Phys(data[n=7+1000]=f75d6000)
AtapiVirtToPhysAddr_: f75d6000 -> 00000000:01160000
  get Phys(data[n=8+1000]=f75d7000)
AtapiVirtToPhysAddr_: f75d7000 -> 00000000:01161000
  get Phys(data[n=8+2000]=f75d8000)
AtapiVirtToPhysAddr_: f75d8000 -> 00000000:01162000
  get Phys(data[n=8+3000]=f75d9000)
AtapiVirtToPhysAddr_: f75d9000 -> 00000000:0115b000
  get Phys(data[n=9+1000]=f75da000)
AtapiVirtToPhysAddr_: f75da000 -> 00000000:0114c000
  get Phys(data[n=10+1000]=f75db000)
AtapiVirtToPhysAddr_: f75db000 -> 00000000:01155000
  get Phys(data[n=11+1000]=f75dc000)
AtapiVirtToPhysAddr_: f75dc000 -> 00000000:01146000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0xadf, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0xadf count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector b5f, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is b5f, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f75dc020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f75dc020)
AtapiVirtToPhysAddr_: f75dc020 -> 00000000:01146020
  get Phys(data[n=1+fe0]=f75dd000)
AtapiVirtToPhysAddr_: f75dd000 -> 00000000:01157000
  get Phys(data[n=2+1000]=f75de000)
AtapiVirtToPhysAddr_: f75de000 -> 00000000:01158000
  get Phys(data[n=2+2000]=f75df000)
AtapiVirtToPhysAddr_: f75df000 -> 00000000:01159000
  get Phys(data[n=2+3000]=f75e0000)
AtapiVirtToPhysAddr_: f75e0000 -> 00000000:0115a000
  get Phys(data[n=2+4000]=f75e1000)
AtapiVirtToPhysAddr_: f75e1000 -> 00000000:01153000
  get Phys(data[n=3+1000]=f75e2000)
AtapiVirtToPhysAddr_: f75e2000 -> 00000000:01144000
  get Phys(data[n=4+1000]=f75e3000)
AtapiVirtToPhysAddr_: f75e3000 -> 00000000:0114d000
  get Phys(data[n=5+1000]=f75e4000)
AtapiVirtToPhysAddr_: f75e4000 -> 00000000:0113e000
  get Phys(data[n=6+1000]=f75e5000)
AtapiVirtToPhysAddr_: f75e5000 -> 00000000:0114f000
  get Phys(data[n=7+1000]=f75e6000)
AtapiVirtToPhysAddr_: f75e6000 -> 00000000:01150000
  get Phys(data[n=8+1000]=f75e7000)
AtapiVirtToPhysAddr_: f75e7000 -> 00000000:01151000
  get Phys(data[n=8+2000]=f75e8000)
AtapiVirtToPhysAddr_: f75e8000 -> 00000000:01152000
  get Phys(data[n=8+3000]=f75e9000)
AtapiVirtToPhysAddr_: f75e9000 -> 00000000:0114b000
  get Phys(data[n=9+1000]=f75ea000)
AtapiVirtToPhysAddr_: f75ea000 -> 00000000:0113c000
  get Phys(data[n=10+1000]=f75eb000)
AtapiVirtToPhysAddr_: f75eb000 -> 00000000:01145000
  get Phys(data[n=11+1000]=f75ec000)
AtapiVirtToPhysAddr_: f75ec000 -> 00000000:01136000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0xb5f, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0xb5f count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector bdf, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is bdf, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f75ec020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f75ec020)
AtapiVirtToPhysAddr_: f75ec020 -> 00000000:01136020
  get Phys(data[n=1+fe0]=f75ed000)
AtapiVirtToPhysAddr_: f75ed000 -> 00000000:01147000
  get Phys(data[n=2+1000]=f75ee000)
AtapiVirtToPhysAddr_: f75ee000 -> 00000000:01148000
  get Phys(data[n=2+2000]=f75ef000)
AtapiVirtToPhysAddr_: f75ef000 -> 00000000:01149000
  get Phys(data[n=2+3000]=f75f0000)
AtapiVirtToPhysAddr_: f75f0000 -> 00000000:0114a000
  get Phys(data[n=2+4000]=f75f1000)
AtapiVirtToPhysAddr_: f75f1000 -> 00000000:01143000
  get Phys(data[n=3+1000]=f75f2000)
AtapiVirtToPhysAddr_: f75f2000 -> 00000000:01134000
  get Phys(data[n=4+1000]=f75f3000)
AtapiVirtToPhysAddr_: f75f3000 -> 00000000:01135000
  get Phys(data[n=4+2000]=f75f4000)
AtapiVirtToPhysAddr_: f75f4000 -> 00000000:0112e000
  get Phys(data[n=5+1000]=f75f5000)
AtapiVirtToPhysAddr_: f75f5000 -> 00000000:0113f000
  get Phys(data[n=6+1000]=f75f6000)
AtapiVirtToPhysAddr_: f75f6000 -> 00000000:01140000
  get Phys(data[n=7+1000]=f75f7000)
AtapiVirtToPhysAddr_: f75f7000 -> 00000000:01141000
  get Phys(data[n=7+2000]=f75f8000)
AtapiVirtToPhysAddr_: f75f8000 -> 00000000:01142000
  get Phys(data[n=7+3000]=f75f9000)
AtapiVirtToPhysAddr_: f75f9000 -> 00000000:3f3a3000
  get Phys(data[n=8+1000]=f75fa000)
AtapiVirtToPhysAddr_: f75fa000 -> 00000000:0112c000
  get Phys(data[n=9+1000]=f75fb000)
AtapiVirtToPhysAddr_: f75fb000 -> 00000000:0112d000
  get Phys(data[n=9+2000]=f75fc000)
AtapiVirtToPhysAddr_: f75fc000 -> 00000000:01126000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0xbdf, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0xbdf count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector c5f, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is c5f, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f75fc020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f75fc020)
AtapiVirtToPhysAddr_: f75fc020 -> 00000000:01126020
  get Phys(data[n=1+fe0]=f75fd000)
AtapiVirtToPhysAddr_: f75fd000 -> 00000000:01137000
  get Phys(data[n=2+1000]=f75fe000)
AtapiVirtToPhysAddr_: f75fe000 -> 00000000:01138000
  get Phys(data[n=2+2000]=f75ff000)
AtapiVirtToPhysAddr_: f75ff000 -> 00000000:01139000
  get Phys(data[n=2+3000]=f7600000)
AtapiVirtToPhysAddr_: f7600000 -> 00000000:0113a000
  get Phys(data[n=2+4000]=f7601000)
AtapiVirtToPhysAddr_: f7601000 -> 00000000:0113b000
  get Phys(data[n=2+5000]=f7602000)
AtapiVirtToPhysAddr_: f7602000 -> 00000000:01124000
  get Phys(data[n=3+1000]=f7603000)
AtapiVirtToPhysAddr_: f7603000 -> 00000000:01125000
  get Phys(data[n=3+2000]=f7604000)
AtapiVirtToPhysAddr_: f7604000 -> 00000000:0111e000
  get Phys(data[n=4+1000]=f7605000)
AtapiVirtToPhysAddr_: f7605000 -> 00000000:3f74f000
  get Phys(data[n=5+1000]=f7606000)
AtapiVirtToPhysAddr_: f7606000 -> 00000000:3f750000
  get Phys(data[n=6+1000]=f7607000)
AtapiVirtToPhysAddr_: f7607000 -> 00000000:01131000
  get Phys(data[n=7+1000]=f7608000)
AtapiVirtToPhysAddr_: f7608000 -> 00000000:01132000
  get Phys(data[n=7+2000]=f7609000)
AtapiVirtToPhysAddr_: f7609000 -> 00000000:01133000
  get Phys(data[n=7+3000]=f760a000)
AtapiVirtToPhysAddr_: f760a000 -> 00000000:0111c000
  get Phys(data[n=8+1000]=f760b000)
AtapiVirtToPhysAddr_: f760b000 -> 00000000:0111d000
  get Phys(data[n=8+2000]=f760c000)
AtapiVirtToPhysAddr_: f760c000 -> 00000000:01116000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0xc5f, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0xc5f count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector cdf, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is cdf, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f760c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f760c020)
AtapiVirtToPhysAddr_: f760c020 -> 00000000:01116020
  get Phys(data[n=1+fe0]=f760d000)
AtapiVirtToPhysAddr_: f760d000 -> 00000000:0112f000
  get Phys(data[n=2+1000]=f760e000)
AtapiVirtToPhysAddr_: f760e000 -> 00000000:01130000
  get Phys(data[n=3+1000]=f760f000)
AtapiVirtToPhysAddr_: f760f000 -> 00000000:01129000
  get Phys(data[n=4+1000]=f7610000)
AtapiVirtToPhysAddr_: f7610000 -> 00000000:0112a000
  get Phys(data[n=4+2000]=f7611000)
AtapiVirtToPhysAddr_: f7611000 -> 00000000:0112b000
  get Phys(data[n=4+3000]=f7612000)
AtapiVirtToPhysAddr_: f7612000 -> 00000000:01114000
  get Phys(data[n=5+1000]=f7613000)
AtapiVirtToPhysAddr_: f7613000 -> 00000000:01115000
  get Phys(data[n=5+2000]=f7614000)
AtapiVirtToPhysAddr_: f7614000 -> 00000000:0110e000
  get Phys(data[n=6+1000]=f7615000)
AtapiVirtToPhysAddr_: f7615000 -> 00000000:01127000
  get Phys(data[n=7+1000]=f7616000)
AtapiVirtToPhysAddr_: f7616000 -> 00000000:01128000
  get Phys(data[n=7+2000]=f7617000)
AtapiVirtToPhysAddr_: f7617000 -> 00000000:01121000
  get Phys(data[n=8+1000]=f7618000)
AtapiVirtToPhysAddr_: f7618000 -> 00000000:01122000
  get Phys(data[n=8+2000]=f7619000)
AtapiVirtToPhysAddr_: f7619000 -> 00000000:01123000
  get Phys(data[n=8+3000]=f761a000)
AtapiVirtToPhysAddr_: f761a000 -> 00000000:0110c000
  get Phys(data[n=9+1000]=f761b000)
AtapiVirtToPhysAddr_: f761b000 -> 00000000:0110d000
  get Phys(data[n=9+2000]=f761c000)
AtapiVirtToPhysAddr_: f761c000 -> 00000000:01106000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0xcdf, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0xcdf count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector d5f, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is d5f, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f761c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f761c020)
AtapiVirtToPhysAddr_: f761c020 -> 00000000:01106020
  get Phys(data[n=1+fe0]=f761d000)
AtapiVirtToPhysAddr_: f761d000 -> 00000000:0111f000
  get Phys(data[n=2+1000]=f761e000)
AtapiVirtToPhysAddr_: f761e000 -> 00000000:01120000
  get Phys(data[n=3+1000]=f761f000)
AtapiVirtToPhysAddr_: f761f000 -> 00000000:01119000
  get Phys(data[n=4+1000]=f7620000)
AtapiVirtToPhysAddr_: f7620000 -> 00000000:0111a000
  get Phys(data[n=4+2000]=f7621000)
AtapiVirtToPhysAddr_: f7621000 -> 00000000:0111b000
  get Phys(data[n=4+3000]=f7622000)
AtapiVirtToPhysAddr_: f7622000 -> 00000000:01104000
  get Phys(data[n=5+1000]=f7623000)
AtapiVirtToPhysAddr_: f7623000 -> 00000000:01105000
  get Phys(data[n=5+2000]=f7624000)
AtapiVirtToPhysAddr_: f7624000 -> 00000000:010fe000
  get Phys(data[n=6+1000]=f7625000)
AtapiVirtToPhysAddr_: f7625000 -> 00000000:01117000
  get Phys(data[n=7+1000]=f7626000)
AtapiVirtToPhysAddr_: f7626000 -> 00000000:01118000
  get Phys(data[n=7+2000]=f7627000)
AtapiVirtToPhysAddr_: f7627000 -> 00000000:01111000
  get Phys(data[n=8+1000]=f7628000)
AtapiVirtToPhysAddr_: f7628000 -> 00000000:01112000
  get Phys(data[n=8+2000]=f7629000)
AtapiVirtToPhysAddr_: f7629000 -> 00000000:01113000
  get Phys(data[n=8+3000]=f762a000)
AtapiVirtToPhysAddr_: f762a000 -> 00000000:010fc000
  get Phys(data[n=9+1000]=f762b000)
AtapiVirtToPhysAddr_: f762b000 -> 00000000:010fd000
  get Phys(data[n=9+2000]=f762c000)
AtapiVirtToPhysAddr_: f762c000 -> 00000000:010f6000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0xd5f, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0xd5f count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector ddf, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is ddf, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f762c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f762c020)
AtapiVirtToPhysAddr_: f762c020 -> 00000000:010f6020
  get Phys(data[n=1+fe0]=f762d000)
AtapiVirtToPhysAddr_: f762d000 -> 00000000:0110f000
  get Phys(data[n=2+1000]=f762e000)
AtapiVirtToPhysAddr_: f762e000 -> 00000000:01110000
  get Phys(data[n=3+1000]=f762f000)
AtapiVirtToPhysAddr_: f762f000 -> 00000000:01109000
  get Phys(data[n=4+1000]=f7630000)
AtapiVirtToPhysAddr_: f7630000 -> 00000000:0110a000
  get Phys(data[n=4+2000]=f7631000)
AtapiVirtToPhysAddr_: f7631000 -> 00000000:0110b000
  get Phys(data[n=4+3000]=f7632000)
AtapiVirtToPhysAddr_: f7632000 -> 00000000:010ec000
  get Phys(data[n=5+1000]=f7633000)
AtapiVirtToPhysAddr_: f7633000 -> 00000000:010e5000
  get Phys(data[n=6+1000]=f7634000)
AtapiVirtToPhysAddr_: f7634000 -> 00000000:010e6000
  get Phys(data[n=6+2000]=f7635000)
AtapiVirtToPhysAddr_: f7635000 -> 00000000:01107000
  get Phys(data[n=7+1000]=f7636000)
AtapiVirtToPhysAddr_: f7636000 -> 00000000:01108000
  get Phys(data[n=7+2000]=f7637000)
AtapiVirtToPhysAddr_: f7637000 -> 00000000:01101000
  get Phys(data[n=8+1000]=f7638000)
AtapiVirtToPhysAddr_: f7638000 -> 00000000:01102000
  get Phys(data[n=8+2000]=f7639000)
AtapiVirtToPhysAddr_: f7639000 -> 00000000:01103000
  get Phys(data[n=8+3000]=f763a000)
AtapiVirtToPhysAddr_: f763a000 -> 00000000:00ea4000
  get Phys(data[n=9+1000]=f763b000)
AtapiVirtToPhysAddr_: f763b000 -> 00000000:00ea5000
  get Phys(data[n=9+2000]=f763c000)
AtapiVirtToPhysAddr_: f763c000 -> 00000000:00eae000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0xddf, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0xddf count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector e5f, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is e5f, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f763c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f763c020)
AtapiVirtToPhysAddr_: f763c020 -> 00000000:00eae020
  get Phys(data[n=1+fe0]=f763d000)
AtapiVirtToPhysAddr_: f763d000 -> 00000000:010ff000
  get Phys(data[n=2+1000]=f763e000)
AtapiVirtToPhysAddr_: f763e000 -> 00000000:01100000
  get Phys(data[n=3+1000]=f763f000)
AtapiVirtToPhysAddr_: f763f000 -> 00000000:010f9000
  get Phys(data[n=4+1000]=f7640000)
AtapiVirtToPhysAddr_: f7640000 -> 00000000:010fa000
  get Phys(data[n=4+2000]=f7641000)
AtapiVirtToPhysAddr_: f7641000 -> 00000000:00e8b000
  get Phys(data[n=5+1000]=f7642000)
AtapiVirtToPhysAddr_: f7642000 -> 00000000:00eac000
  get Phys(data[n=6+1000]=f7643000)
AtapiVirtToPhysAddr_: f7643000 -> 00000000:00ead000
  get Phys(data[n=6+2000]=f7644000)
AtapiVirtToPhysAddr_: f7644000 -> 00000000:00eb6000
  get Phys(data[n=7+1000]=f7645000)
AtapiVirtToPhysAddr_: f7645000 -> 00000000:010f7000
  get Phys(data[n=8+1000]=f7646000)
AtapiVirtToPhysAddr_: f7646000 -> 00000000:010f8000
  get Phys(data[n=8+2000]=f7647000)
AtapiVirtToPhysAddr_: f7647000 -> 00000000:010e1000
  get Phys(data[n=9+1000]=f7648000)
AtapiVirtToPhysAddr_: f7648000 -> 00000000:010e2000
  get Phys(data[n=9+2000]=f7649000)
AtapiVirtToPhysAddr_: f7649000 -> 00000000:00e93000
  get Phys(data[n=10+1000]=f764a000)
AtapiVirtToPhysAddr_: f764a000 -> 00000000:00eb4000
  get Phys(data[n=11+1000]=f764b000)
AtapiVirtToPhysAddr_: f764b000 -> 00000000:00eb5000
  get Phys(data[n=11+2000]=f764c000)
AtapiVirtToPhysAddr_: f764c000 -> 00000000:00ebe000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0xe5f, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0xe5f count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector edf, OrigWordsRequested 0x3d00, DevSize 0x3d
IdeReadWrite (REQ): Starting sector is edf, Number of WORDS 0x3d00, DevSize 0x3d
AtapiDmaSetup: mode 0x44, data f764c020, count 7a00, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f764c020)
AtapiVirtToPhysAddr_: f764c020 -> 00000000:00ebe020
  get Phys(data[n=1+fe0]=f764d000)
AtapiVirtToPhysAddr_: f764d000 -> 00000000:010e7000
  get Phys(data[n=2+1000]=f764e000)
AtapiVirtToPhysAddr_: f764e000 -> 00000000:010e8000
  get Phys(data[n=2+2000]=f764f000)
AtapiVirtToPhysAddr_: f764f000 -> 00000000:00e99000
  get Phys(data[n=3+1000]=f7650000)
AtapiVirtToPhysAddr_: f7650000 -> 00000000:00e9a000
  get Phys(data[n=3+2000]=f7651000)
AtapiVirtToPhysAddr_: f7651000 -> 00000000:00e9b000
  get Phys(data[n=3+3000]=f7652000)
AtapiVirtToPhysAddr_: f7652000 -> 00000000:00ebc000
  get Phys(data[n=4+1000]=f7653000)
AtapiVirtToPhysAddr_: f7653000 -> 00000000:00ebd000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0xedf, Count 0x3d(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0xedf count 0x3d feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 7a00, full size 7a00
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector f1c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is f1c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f747c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f747c020)
AtapiVirtToPhysAddr_: f747c020 -> 00000000:00bee020
  get Phys(data[n=1+fe0]=f747d000)
AtapiVirtToPhysAddr_: f747d000 -> 00000000:00c0f000
  get Phys(data[n=2+1000]=f747e000)
AtapiVirtToPhysAddr_: f747e000 -> 00000000:00bf8000
  get Phys(data[n=3+1000]=f747f000)
AtapiVirtToPhysAddr_: f747f000 -> 00000000:00c11000
  get Phys(data[n=4+1000]=f7480000)
AtapiVirtToPhysAddr_: f7480000 -> 00000000:00c0a000
  get Phys(data[n=5+1000]=f7481000)
AtapiVirtToPhysAddr_: f7481000 -> 00000000:00beb000
  get Phys(data[n=6+1000]=f7482000)
AtapiVirtToPhysAddr_: f7482000 -> 00000000:00bec000
  get Phys(data[n=6+2000]=f7483000)
AtapiVirtToPhysAddr_: f7483000 -> 00000000:00bed000
  get Phys(data[n=6+3000]=f7484000)
AtapiVirtToPhysAddr_: f7484000 -> 00000000:00be6000
  get Phys(data[n=7+1000]=f7485000)
AtapiVirtToPhysAddr_: f7485000 -> 00000000:00c07000
  get Phys(data[n=8+1000]=f7486000)
AtapiVirtToPhysAddr_: f7486000 -> 00000000:00bf0000
  get Phys(data[n=9+1000]=f7487000)
AtapiVirtToPhysAddr_: f7487000 -> 00000000:00c09000
  get Phys(data[n=10+1000]=f7488000)
AtapiVirtToPhysAddr_: f7488000 -> 00000000:00c02000
  get Phys(data[n=11+1000]=f7489000)
AtapiVirtToPhysAddr_: f7489000 -> 00000000:00be3000
  get Phys(data[n=12+1000]=f748a000)
AtapiVirtToPhysAddr_: f748a000 -> 00000000:00be4000
  get Phys(data[n=12+2000]=f748b000)
AtapiVirtToPhysAddr_: f748b000 -> 00000000:00be5000
  get Phys(data[n=12+3000]=f748c000)
AtapiVirtToPhysAddr_: f748c000 -> 00000000:00bde000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0xf1c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0xf1c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector f9c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is f9c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f748c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f748c020)
AtapiVirtToPhysAddr_: f748c020 -> 00000000:00bde020
  get Phys(data[n=1+fe0]=f748d000)
AtapiVirtToPhysAddr_: f748d000 -> 00000000:00bff000
  get Phys(data[n=2+1000]=f748e000)
AtapiVirtToPhysAddr_: f748e000 -> 00000000:00be8000
  get Phys(data[n=3+1000]=f748f000)
AtapiVirtToPhysAddr_: f748f000 -> 00000000:00c01000
  get Phys(data[n=4+1000]=f7490000)
AtapiVirtToPhysAddr_: f7490000 -> 00000000:00bfa000
  get Phys(data[n=5+1000]=f7491000)
AtapiVirtToPhysAddr_: f7491000 -> 00000000:00bdb000
  get Phys(data[n=6+1000]=f7492000)
AtapiVirtToPhysAddr_: f7492000 -> 00000000:00bdc000
  get Phys(data[n=6+2000]=f7493000)
AtapiVirtToPhysAddr_: f7493000 -> 00000000:00bdd000
  get Phys(data[n=6+3000]=f7494000)
AtapiVirtToPhysAddr_: f7494000 -> 00000000:00bd6000
  get Phys(data[n=7+1000]=f7495000)
AtapiVirtToPhysAddr_: f7495000 -> 00000000:00bf7000
  get Phys(data[n=8+1000]=f7496000)
AtapiVirtToPhysAddr_: f7496000 -> 00000000:00be0000
  get Phys(data[n=9+1000]=f7497000)
AtapiVirtToPhysAddr_: f7497000 -> 00000000:00bf9000
  get Phys(data[n=10+1000]=f7498000)
AtapiVirtToPhysAddr_: f7498000 -> 00000000:00bf2000
  get Phys(data[n=11+1000]=f7499000)
AtapiVirtToPhysAddr_: f7499000 -> 00000000:00bd3000
  get Phys(data[n=12+1000]=f749a000)
AtapiVirtToPhysAddr_: f749a000 -> 00000000:00bd4000
  get Phys(data[n=12+2000]=f749b000)
AtapiVirtToPhysAddr_: f749b000 -> 00000000:00bd5000
  get Phys(data[n=12+3000]=f749c000)
AtapiVirtToPhysAddr_: f749c000 -> 00000000:00bce000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0xf9c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0xf9c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 101c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 101c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f749c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f749c020)
AtapiVirtToPhysAddr_: f749c020 -> 00000000:00bce020
  get Phys(data[n=1+fe0]=f749d000)
AtapiVirtToPhysAddr_: f749d000 -> 00000000:00bef000
  get Phys(data[n=2+1000]=f749e000)
AtapiVirtToPhysAddr_: f749e000 -> 00000000:00bd8000
  get Phys(data[n=3+1000]=f749f000)
AtapiVirtToPhysAddr_: f749f000 -> 00000000:00bf1000
  get Phys(data[n=4+1000]=f74a0000)
AtapiVirtToPhysAddr_: f74a0000 -> 00000000:00bea000
  get Phys(data[n=5+1000]=f74a1000)
AtapiVirtToPhysAddr_: f74a1000 -> 00000000:00bcb000
  get Phys(data[n=6+1000]=f74a2000)
AtapiVirtToPhysAddr_: f74a2000 -> 00000000:00bcc000
  get Phys(data[n=6+2000]=f74a3000)
AtapiVirtToPhysAddr_: f74a3000 -> 00000000:00bcd000
  get Phys(data[n=6+3000]=f74a4000)
AtapiVirtToPhysAddr_: f74a4000 -> 00000000:00bc6000
  get Phys(data[n=7+1000]=f74a5000)
AtapiVirtToPhysAddr_: f74a5000 -> 00000000:00be7000
  get Phys(data[n=8+1000]=f74a6000)
AtapiVirtToPhysAddr_: f74a6000 -> 00000000:00bd0000
  get Phys(data[n=9+1000]=f74a7000)
AtapiVirtToPhysAddr_: f74a7000 -> 00000000:00be9000
  get Phys(data[n=10+1000]=f74a8000)
AtapiVirtToPhysAddr_: f74a8000 -> 00000000:00be2000
  get Phys(data[n=11+1000]=f74a9000)
AtapiVirtToPhysAddr_: f74a9000 -> 00000000:00bc3000
  get Phys(data[n=12+1000]=f74aa000)
AtapiVirtToPhysAddr_: f74aa000 -> 00000000:00bc4000
  get Phys(data[n=12+2000]=f74ab000)
AtapiVirtToPhysAddr_: f74ab000 -> 00000000:00bc5000
  get Phys(data[n=12+3000]=f74ac000)
AtapiVirtToPhysAddr_: f74ac000 -> 00000000:00bbe000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x101c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x101c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 109c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 109c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f74ac020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f74ac020)
AtapiVirtToPhysAddr_: f74ac020 -> 00000000:00bbe020
  get Phys(data[n=1+fe0]=f74ad000)
AtapiVirtToPhysAddr_: f74ad000 -> 00000000:00bdf000
  get Phys(data[n=2+1000]=f74ae000)
AtapiVirtToPhysAddr_: f74ae000 -> 00000000:00bc8000
  get Phys(data[n=3+1000]=f74af000)
AtapiVirtToPhysAddr_: f74af000 -> 00000000:00be1000
  get Phys(data[n=4+1000]=f74b0000)
AtapiVirtToPhysAddr_: f74b0000 -> 00000000:00bda000
  get Phys(data[n=5+1000]=f74b1000)
AtapiVirtToPhysAddr_: f74b1000 -> 00000000:00bbb000
  get Phys(data[n=6+1000]=f74b2000)
AtapiVirtToPhysAddr_: f74b2000 -> 00000000:00bbc000
  get Phys(data[n=6+2000]=f74b3000)
AtapiVirtToPhysAddr_: f74b3000 -> 00000000:00bbd000
  get Phys(data[n=6+3000]=f74b4000)
AtapiVirtToPhysAddr_: f74b4000 -> 00000000:00bb6000
  get Phys(data[n=7+1000]=f74b5000)
AtapiVirtToPhysAddr_: f74b5000 -> 00000000:00bd7000
  get Phys(data[n=8+1000]=f74b6000)
AtapiVirtToPhysAddr_: f74b6000 -> 00000000:00bc0000
  get Phys(data[n=9+1000]=f74b7000)
AtapiVirtToPhysAddr_: f74b7000 -> 00000000:00bd9000
  get Phys(data[n=10+1000]=f74b8000)
AtapiVirtToPhysAddr_: f74b8000 -> 00000000:00bd2000
  get Phys(data[n=11+1000]=f74b9000)
AtapiVirtToPhysAddr_: f74b9000 -> 00000000:00bb3000
  get Phys(data[n=12+1000]=f74ba000)
AtapiVirtToPhysAddr_: f74ba000 -> 00000000:00bb4000
  get Phys(data[n=12+2000]=f74bb000)
AtapiVirtToPhysAddr_: f74bb000 -> 00000000:00bb5000
  get Phys(data[n=12+3000]=f74bc000)
AtapiVirtToPhysAddr_: f74bc000 -> 00000000:00bae000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x109c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x109c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 111c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 111c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f74bc020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f74bc020)
AtapiVirtToPhysAddr_: f74bc020 -> 00000000:00bae020
  get Phys(data[n=1+fe0]=f74bd000)
AtapiVirtToPhysAddr_: f74bd000 -> 00000000:00bcf000
  get Phys(data[n=2+1000]=f74be000)
AtapiVirtToPhysAddr_: f74be000 -> 00000000:00bb8000
  get Phys(data[n=3+1000]=f74bf000)
AtapiVirtToPhysAddr_: f74bf000 -> 00000000:00bd1000
  get Phys(data[n=4+1000]=f74c0000)
AtapiVirtToPhysAddr_: f74c0000 -> 00000000:00bca000
  get Phys(data[n=5+1000]=f74c1000)
AtapiVirtToPhysAddr_: f74c1000 -> 00000000:00bab000
  get Phys(data[n=6+1000]=f74c2000)
AtapiVirtToPhysAddr_: f74c2000 -> 00000000:00bac000
  get Phys(data[n=6+2000]=f74c3000)
AtapiVirtToPhysAddr_: f74c3000 -> 00000000:00bad000
  get Phys(data[n=6+3000]=f74c4000)
AtapiVirtToPhysAddr_: f74c4000 -> 00000000:00ba6000
  get Phys(data[n=7+1000]=f74c5000)
AtapiVirtToPhysAddr_: f74c5000 -> 00000000:00bc7000
  get Phys(data[n=8+1000]=f74c6000)
AtapiVirtToPhysAddr_: f74c6000 -> 00000000:00bb0000
  get Phys(data[n=9+1000]=f74c7000)
AtapiVirtToPhysAddr_: f74c7000 -> 00000000:00bc9000
  get Phys(data[n=10+1000]=f74c8000)
AtapiVirtToPhysAddr_: f74c8000 -> 00000000:00bc2000
  get Phys(data[n=11+1000]=f74c9000)
AtapiVirtToPhysAddr_: f74c9000 -> 00000000:00ba3000
  get Phys(data[n=12+1000]=f74ca000)
AtapiVirtToPhysAddr_: f74ca000 -> 00000000:00ba4000
  get Phys(data[n=12+2000]=f74cb000)
AtapiVirtToPhysAddr_: f74cb000 -> 00000000:00ba5000
  get Phys(data[n=12+3000]=f74cc000)
AtapiVirtToPhysAddr_: f74cc000 -> 00000000:00b9e000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x111c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x111c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 119c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 119c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f74cc020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f74cc020)
AtapiVirtToPhysAddr_: f74cc020 -> 00000000:00b9e020
  get Phys(data[n=1+fe0]=f74cd000)
AtapiVirtToPhysAddr_: f74cd000 -> 00000000:00bbf000
  get Phys(data[n=2+1000]=f74ce000)
AtapiVirtToPhysAddr_: f74ce000 -> 00000000:00ba8000
  get Phys(data[n=3+1000]=f74cf000)
AtapiVirtToPhysAddr_: f74cf000 -> 00000000:00bc1000
  get Phys(data[n=4+1000]=f74d0000)
AtapiVirtToPhysAddr_: f74d0000 -> 00000000:00bba000
  get Phys(data[n=5+1000]=f74d1000)
AtapiVirtToPhysAddr_: f74d1000 -> 00000000:00b9b000
  get Phys(data[n=6+1000]=f74d2000)
AtapiVirtToPhysAddr_: f74d2000 -> 00000000:00b9c000
  get Phys(data[n=6+2000]=f74d3000)
AtapiVirtToPhysAddr_: f74d3000 -> 00000000:00b9d000
  get Phys(data[n=6+3000]=f74d4000)
AtapiVirtToPhysAddr_: f74d4000 -> 00000000:00b96000
  get Phys(data[n=7+1000]=f74d5000)
AtapiVirtToPhysAddr_: f74d5000 -> 00000000:00bb7000
  get Phys(data[n=8+1000]=f74d6000)
AtapiVirtToPhysAddr_: f74d6000 -> 00000000:00ba0000
  get Phys(data[n=9+1000]=f74d7000)
AtapiVirtToPhysAddr_: f74d7000 -> 00000000:00bb9000
  get Phys(data[n=10+1000]=f74d8000)
AtapiVirtToPhysAddr_: f74d8000 -> 00000000:00bb2000
  get Phys(data[n=11+1000]=f74d9000)
AtapiVirtToPhysAddr_: f74d9000 -> 00000000:00b93000
  get Phys(data[n=12+1000]=f74da000)
AtapiVirtToPhysAddr_: f74da000 -> 00000000:00b94000
  get Phys(data[n=12+2000]=f74db000)
AtapiVirtToPhysAddr_: f74db000 -> 00000000:00b95000
  get Phys(data[n=12+3000]=f74dc000)
AtapiVirtToPhysAddr_: f74dc000 -> 00000000:00baf000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x119c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x119c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 121c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 121c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f74dc020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f74dc020)
AtapiVirtToPhysAddr_: f74dc020 -> 00000000:00baf020
  get Phys(data[n=1+fe0]=f74dd000)
AtapiVirtToPhysAddr_: f74dd000 -> 00000000:00b98000
  get Phys(data[n=2+1000]=f74de000)
AtapiVirtToPhysAddr_: f74de000 -> 00000000:00bb1000
  get Phys(data[n=3+1000]=f74df000)
AtapiVirtToPhysAddr_: f74df000 -> 00000000:00baa000
  get Phys(data[n=4+1000]=f74e0000)
AtapiVirtToPhysAddr_: f74e0000 -> 00000000:00b8b000
  get Phys(data[n=5+1000]=f74e1000)
AtapiVirtToPhysAddr_: f74e1000 -> 00000000:00b8c000
  get Phys(data[n=5+2000]=f74e2000)
AtapiVirtToPhysAddr_: f74e2000 -> 00000000:00b8d000
  get Phys(data[n=5+3000]=f74e3000)
AtapiVirtToPhysAddr_: f74e3000 -> 00000000:00b86000
  get Phys(data[n=6+1000]=f74e4000)
AtapiVirtToPhysAddr_: f74e4000 -> 00000000:00ba7000
  get Phys(data[n=7+1000]=f74e5000)
AtapiVirtToPhysAddr_: f74e5000 -> 00000000:00b90000
  get Phys(data[n=8+1000]=f74e6000)
AtapiVirtToPhysAddr_: f74e6000 -> 00000000:00ba9000
  get Phys(data[n=9+1000]=f74e7000)
AtapiVirtToPhysAddr_: f74e7000 -> 00000000:00ba2000
  get Phys(data[n=10+1000]=f74e8000)
AtapiVirtToPhysAddr_: f74e8000 -> 00000000:00b83000
  get Phys(data[n=11+1000]=f74e9000)
AtapiVirtToPhysAddr_: f74e9000 -> 00000000:00b84000
  get Phys(data[n=11+2000]=f74ea000)
AtapiVirtToPhysAddr_: f74ea000 -> 00000000:00b85000
  get Phys(data[n=11+3000]=f74eb000)
AtapiVirtToPhysAddr_: f74eb000 -> 00000000:00b7e000
  get Phys(data[n=12+1000]=f74ec000)
AtapiVirtToPhysAddr_: f74ec000 -> 00000000:00b9f000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x121c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x121c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 129c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 129c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f74ec020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f74ec020)
AtapiVirtToPhysAddr_: f74ec020 -> 00000000:00b9f020
  get Phys(data[n=1+fe0]=f74ed000)
AtapiVirtToPhysAddr_: f74ed000 -> 00000000:00b88000
  get Phys(data[n=2+1000]=f74ee000)
AtapiVirtToPhysAddr_: f74ee000 -> 00000000:00ba1000
  get Phys(data[n=3+1000]=f74ef000)
AtapiVirtToPhysAddr_: f74ef000 -> 00000000:00b9a000
  get Phys(data[n=4+1000]=f74f0000)
AtapiVirtToPhysAddr_: f74f0000 -> 00000000:00b7b000
  get Phys(data[n=5+1000]=f74f1000)
AtapiVirtToPhysAddr_: f74f1000 -> 00000000:00b7c000
  get Phys(data[n=5+2000]=f74f2000)
AtapiVirtToPhysAddr_: f74f2000 -> 00000000:00b7d000
  get Phys(data[n=5+3000]=f74f3000)
AtapiVirtToPhysAddr_: f74f3000 -> 00000000:00b76000
  get Phys(data[n=6+1000]=f74f4000)
AtapiVirtToPhysAddr_: f74f4000 -> 00000000:00b97000
  get Phys(data[n=7+1000]=f74f5000)
AtapiVirtToPhysAddr_: f74f5000 -> 00000000:00b80000
  get Phys(data[n=8+1000]=f74f6000)
AtapiVirtToPhysAddr_: f74f6000 -> 00000000:00b99000
  get Phys(data[n=9+1000]=f74f7000)
AtapiVirtToPhysAddr_: f74f7000 -> 00000000:00b92000
  get Phys(data[n=10+1000]=f74f8000)
AtapiVirtToPhysAddr_: f74f8000 -> 00000000:00b73000
  get Phys(data[n=11+1000]=f74f9000)
AtapiVirtToPhysAddr_: f74f9000 -> 00000000:00b74000
  get Phys(data[n=11+2000]=f74fa000)
AtapiVirtToPhysAddr_: f74fa000 -> 00000000:00b75000
  get Phys(data[n=11+3000]=f74fb000)
AtapiVirtToPhysAddr_: f74fb000 -> 00000000:00b6e000
  get Phys(data[n=12+1000]=f74fc000)
AtapiVirtToPhysAddr_: f74fc000 -> 00000000:00b8f000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x129c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x129c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 131c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 131c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f74fc020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f74fc020)
AtapiVirtToPhysAddr_: f74fc020 -> 00000000:00b8f020
  get Phys(data[n=1+fe0]=f74fd000)
AtapiVirtToPhysAddr_: f74fd000 -> 00000000:00b78000
  get Phys(data[n=2+1000]=f74fe000)
AtapiVirtToPhysAddr_: f74fe000 -> 00000000:00b91000
  get Phys(data[n=3+1000]=f74ff000)
AtapiVirtToPhysAddr_: f74ff000 -> 00000000:00b8a000
  get Phys(data[n=4+1000]=f7500000)
AtapiVirtToPhysAddr_: f7500000 -> 00000000:00b6b000
  get Phys(data[n=5+1000]=f7501000)
AtapiVirtToPhysAddr_: f7501000 -> 00000000:00b6c000
  get Phys(data[n=5+2000]=f7502000)
AtapiVirtToPhysAddr_: f7502000 -> 00000000:00b6d000
  get Phys(data[n=5+3000]=f7503000)
AtapiVirtToPhysAddr_: f7503000 -> 00000000:00b66000
  get Phys(data[n=6+1000]=f7504000)
AtapiVirtToPhysAddr_: f7504000 -> 00000000:00b87000
  get Phys(data[n=7+1000]=f7505000)
AtapiVirtToPhysAddr_: f7505000 -> 00000000:00b70000
  get Phys(data[n=8+1000]=f7506000)
AtapiVirtToPhysAddr_: f7506000 -> 00000000:00b89000
  get Phys(data[n=9+1000]=f7507000)
AtapiVirtToPhysAddr_: f7507000 -> 00000000:00b82000
  get Phys(data[n=10+1000]=f7508000)
AtapiVirtToPhysAddr_: f7508000 -> 00000000:00b63000
  get Phys(data[n=11+1000]=f7509000)
AtapiVirtToPhysAddr_: f7509000 -> 00000000:00b64000
  get Phys(data[n=11+2000]=f750a000)
AtapiVirtToPhysAddr_: f750a000 -> 00000000:00b65000
  get Phys(data[n=11+3000]=f750b000)
AtapiVirtToPhysAddr_: f750b000 -> 00000000:00b5e000
  get Phys(data[n=12+1000]=f750c000)
AtapiVirtToPhysAddr_: f750c000 -> 00000000:00b7f000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x131c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x131c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 139c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 139c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f750c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f750c020)
AtapiVirtToPhysAddr_: f750c020 -> 00000000:00b7f020
  get Phys(data[n=1+fe0]=f750d000)
AtapiVirtToPhysAddr_: f750d000 -> 00000000:00b68000
  get Phys(data[n=2+1000]=f750e000)
AtapiVirtToPhysAddr_: f750e000 -> 00000000:00b81000
  get Phys(data[n=3+1000]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:00b7a000
  get Phys(data[n=4+1000]=f7510000)
AtapiVirtToPhysAddr_: f7510000 -> 00000000:00b5b000
  get Phys(data[n=5+1000]=f7511000)
AtapiVirtToPhysAddr_: f7511000 -> 00000000:00b5c000
  get Phys(data[n=5+2000]=f7512000)
AtapiVirtToPhysAddr_: f7512000 -> 00000000:00b5d000
  get Phys(data[n=5+3000]=f7513000)
AtapiVirtToPhysAddr_: f7513000 -> 00000000:00b56000
  get Phys(data[n=6+1000]=f7514000)
AtapiVirtToPhysAddr_: f7514000 -> 00000000:00b77000
  get Phys(data[n=7+1000]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:00b60000
  get Phys(data[n=8+1000]=f7516000)
AtapiVirtToPhysAddr_: f7516000 -> 00000000:00b79000
  get Phys(data[n=9+1000]=f7517000)
AtapiVirtToPhysAddr_: f7517000 -> 00000000:00b72000
  get Phys(data[n=10+1000]=f7518000)
AtapiVirtToPhysAddr_: f7518000 -> 00000000:00b53000
  get Phys(data[n=11+1000]=f7519000)
AtapiVirtToPhysAddr_: f7519000 -> 00000000:00b54000
  get Phys(data[n=11+2000]=f751a000)
AtapiVirtToPhysAddr_: f751a000 -> 00000000:00b55000
  get Phys(data[n=11+3000]=f751b000)
AtapiVirtToPhysAddr_: f751b000 -> 00000000:00b4e000
  get Phys(data[n=12+1000]=f751c000)
AtapiVirtToPhysAddr_: f751c000 -> 00000000:00b6f000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x139c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x139c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 141c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 141c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f751c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f751c020)
AtapiVirtToPhysAddr_: f751c020 -> 00000000:00b6f020
  get Phys(data[n=1+fe0]=f751d000)
AtapiVirtToPhysAddr_: f751d000 -> 00000000:00b58000
  get Phys(data[n=2+1000]=f751e000)
AtapiVirtToPhysAddr_: f751e000 -> 00000000:00b71000
  get Phys(data[n=3+1000]=f751f000)
AtapiVirtToPhysAddr_: f751f000 -> 00000000:00b6a000
  get Phys(data[n=4+1000]=f7520000)
AtapiVirtToPhysAddr_: f7520000 -> 00000000:00b4b000
  get Phys(data[n=5+1000]=f7521000)
AtapiVirtToPhysAddr_: f7521000 -> 00000000:00b4c000
  get Phys(data[n=5+2000]=f7522000)
AtapiVirtToPhysAddr_: f7522000 -> 00000000:00b4d000
  get Phys(data[n=5+3000]=f7523000)
AtapiVirtToPhysAddr_: f7523000 -> 00000000:00b46000
  get Phys(data[n=6+1000]=f7524000)
AtapiVirtToPhysAddr_: f7524000 -> 00000000:00b67000
  get Phys(data[n=7+1000]=f7525000)
AtapiVirtToPhysAddr_: f7525000 -> 00000000:00b50000
  get Phys(data[n=8+1000]=f7526000)
AtapiVirtToPhysAddr_: f7526000 -> 00000000:00b69000
  get Phys(data[n=9+1000]=f7527000)
AtapiVirtToPhysAddr_: f7527000 -> 00000000:00b62000
  get Phys(data[n=10+1000]=f7528000)
AtapiVirtToPhysAddr_: f7528000 -> 00000000:00b43000
  get Phys(data[n=11+1000]=f7529000)
AtapiVirtToPhysAddr_: f7529000 -> 00000000:00b44000
  get Phys(data[n=11+2000]=f752a000)
AtapiVirtToPhysAddr_: f752a000 -> 00000000:00b45000
  get Phys(data[n=11+3000]=f752b000)
AtapiVirtToPhysAddr_: f752b000 -> 00000000:00b3e000
  get Phys(data[n=12+1000]=f752c000)
AtapiVirtToPhysAddr_: f752c000 -> 00000000:00b5f000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x141c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x141c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 149c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 149c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f752c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f752c020)
AtapiVirtToPhysAddr_: f752c020 -> 00000000:00b5f020
  get Phys(data[n=1+fe0]=f752d000)
AtapiVirtToPhysAddr_: f752d000 -> 00000000:00b48000
  get Phys(data[n=2+1000]=f752e000)
AtapiVirtToPhysAddr_: f752e000 -> 00000000:00b61000
  get Phys(data[n=3+1000]=f752f000)
AtapiVirtToPhysAddr_: f752f000 -> 00000000:00b5a000
  get Phys(data[n=4+1000]=f7530000)
AtapiVirtToPhysAddr_: f7530000 -> 00000000:00b3b000
  get Phys(data[n=5+1000]=f7531000)
AtapiVirtToPhysAddr_: f7531000 -> 00000000:00b3c000
  get Phys(data[n=5+2000]=f7532000)
AtapiVirtToPhysAddr_: f7532000 -> 00000000:00b3d000
  get Phys(data[n=5+3000]=f7533000)
AtapiVirtToPhysAddr_: f7533000 -> 00000000:00b36000
  get Phys(data[n=6+1000]=f7534000)
AtapiVirtToPhysAddr_: f7534000 -> 00000000:00b57000
  get Phys(data[n=7+1000]=f7535000)
AtapiVirtToPhysAddr_: f7535000 -> 00000000:00b40000
  get Phys(data[n=8+1000]=f7536000)
AtapiVirtToPhysAddr_: f7536000 -> 00000000:00b59000
  get Phys(data[n=9+1000]=f7537000)
AtapiVirtToPhysAddr_: f7537000 -> 00000000:00b52000
  get Phys(data[n=10+1000]=f7538000)
AtapiVirtToPhysAddr_: f7538000 -> 00000000:00b33000
  get Phys(data[n=11+1000]=f7539000)
AtapiVirtToPhysAddr_: f7539000 -> 00000000:00b34000
  get Phys(data[n=11+2000]=f753a000)
AtapiVirtToPhysAddr_: f753a000 -> 00000000:00b35000
  get Phys(data[n=11+3000]=f753b000)
AtapiVirtToPhysAddr_: f753b000 -> 00000000:00b2e000
  get Phys(data[n=12+1000]=f753c000)
AtapiVirtToPhysAddr_: f753c000 -> 00000000:00b4f000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x149c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x149c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 151c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 151c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f753c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f753c020)
AtapiVirtToPhysAddr_: f753c020 -> 00000000:00b4f020
  get Phys(data[n=1+fe0]=f753d000)
AtapiVirtToPhysAddr_: f753d000 -> 00000000:00b38000
  get Phys(data[n=2+1000]=f753e000)
AtapiVirtToPhysAddr_: f753e000 -> 00000000:00b51000
  get Phys(data[n=3+1000]=f753f000)
AtapiVirtToPhysAddr_: f753f000 -> 00000000:00b4a000
  get Phys(data[n=4+1000]=f7540000)
AtapiVirtToPhysAddr_: f7540000 -> 00000000:00b2b000
  get Phys(data[n=5+1000]=f7541000)
AtapiVirtToPhysAddr_: f7541000 -> 00000000:00b2c000
  get Phys(data[n=5+2000]=f7542000)
AtapiVirtToPhysAddr_: f7542000 -> 00000000:00b2d000
  get Phys(data[n=5+3000]=f7543000)
AtapiVirtToPhysAddr_: f7543000 -> 00000000:00b26000
  get Phys(data[n=6+1000]=f7544000)
AtapiVirtToPhysAddr_: f7544000 -> 00000000:00b47000
  get Phys(data[n=7+1000]=f7545000)
AtapiVirtToPhysAddr_: f7545000 -> 00000000:00b30000
  get Phys(data[n=8+1000]=f7546000)
AtapiVirtToPhysAddr_: f7546000 -> 00000000:00b49000
  get Phys(data[n=9+1000]=f7547000)
AtapiVirtToPhysAddr_: f7547000 -> 00000000:00b42000
  get Phys(data[n=10+1000]=f7548000)
AtapiVirtToPhysAddr_: f7548000 -> 00000000:00b23000
  get Phys(data[n=11+1000]=f7549000)
AtapiVirtToPhysAddr_: f7549000 -> 00000000:00b24000
  get Phys(data[n=11+2000]=f754a000)
AtapiVirtToPhysAddr_: f754a000 -> 00000000:00b25000
  get Phys(data[n=11+3000]=f754b000)
AtapiVirtToPhysAddr_: f754b000 -> 00000000:00b1e000
  get Phys(data[n=12+1000]=f754c000)
AtapiVirtToPhysAddr_: f754c000 -> 00000000:00b3f000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x151c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x151c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 159c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 159c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f754c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f754c020)
AtapiVirtToPhysAddr_: f754c020 -> 00000000:00b3f020
  get Phys(data[n=1+fe0]=f754d000)
AtapiVirtToPhysAddr_: f754d000 -> 00000000:00b28000
  get Phys(data[n=2+1000]=f754e000)
AtapiVirtToPhysAddr_: f754e000 -> 00000000:00b41000
  get Phys(data[n=3+1000]=f754f000)
AtapiVirtToPhysAddr_: f754f000 -> 00000000:00b3a000
  get Phys(data[n=4+1000]=f7550000)
AtapiVirtToPhysAddr_: f7550000 -> 00000000:00b1b000
  get Phys(data[n=5+1000]=f7551000)
AtapiVirtToPhysAddr_: f7551000 -> 00000000:00b1c000
  get Phys(data[n=5+2000]=f7552000)
AtapiVirtToPhysAddr_: f7552000 -> 00000000:00b1d000
  get Phys(data[n=5+3000]=f7553000)
AtapiVirtToPhysAddr_: f7553000 -> 00000000:00b16000
  get Phys(data[n=6+1000]=f7554000)
AtapiVirtToPhysAddr_: f7554000 -> 00000000:00b37000
  get Phys(data[n=7+1000]=f7555000)
AtapiVirtToPhysAddr_: f7555000 -> 00000000:00b20000
  get Phys(data[n=8+1000]=f7556000)
AtapiVirtToPhysAddr_: f7556000 -> 00000000:00b39000
  get Phys(data[n=9+1000]=f7557000)
AtapiVirtToPhysAddr_: f7557000 -> 00000000:00b32000
  get Phys(data[n=10+1000]=f7558000)
AtapiVirtToPhysAddr_: f7558000 -> 00000000:00b13000
  get Phys(data[n=11+1000]=f7559000)
AtapiVirtToPhysAddr_: f7559000 -> 00000000:00b14000
  get Phys(data[n=11+2000]=f755a000)
AtapiVirtToPhysAddr_: f755a000 -> 00000000:00b15000
  get Phys(data[n=11+3000]=f755b000)
AtapiVirtToPhysAddr_: f755b000 -> 00000000:00b0e000
  get Phys(data[n=12+1000]=f755c000)
AtapiVirtToPhysAddr_: f755c000 -> 00000000:00b2f000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x159c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x159c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 161c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 161c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f755c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f755c020)
AtapiVirtToPhysAddr_: f755c020 -> 00000000:00b2f020
  get Phys(data[n=1+fe0]=f755d000)
AtapiVirtToPhysAddr_: f755d000 -> 00000000:00b18000
  get Phys(data[n=2+1000]=f755e000)
AtapiVirtToPhysAddr_: f755e000 -> 00000000:00b31000
  get Phys(data[n=3+1000]=f755f000)
AtapiVirtToPhysAddr_: f755f000 -> 00000000:00b2a000
  get Phys(data[n=4+1000]=f7560000)
AtapiVirtToPhysAddr_: f7560000 -> 00000000:00b0b000
  get Phys(data[n=5+1000]=f7561000)
AtapiVirtToPhysAddr_: f7561000 -> 00000000:00b0c000
  get Phys(data[n=5+2000]=f7562000)
AtapiVirtToPhysAddr_: f7562000 -> 00000000:00b0d000
  get Phys(data[n=5+3000]=f7563000)
AtapiVirtToPhysAddr_: f7563000 -> 00000000:00b06000
  get Phys(data[n=6+1000]=f7564000)
AtapiVirtToPhysAddr_: f7564000 -> 00000000:00b27000
  get Phys(data[n=7+1000]=f7565000)
AtapiVirtToPhysAddr_: f7565000 -> 00000000:00b10000
  get Phys(data[n=8+1000]=f7566000)
AtapiVirtToPhysAddr_: f7566000 -> 00000000:00b29000
  get Phys(data[n=9+1000]=f7567000)
AtapiVirtToPhysAddr_: f7567000 -> 00000000:00b22000
  get Phys(data[n=10+1000]=f7568000)
AtapiVirtToPhysAddr_: f7568000 -> 00000000:00b03000
  get Phys(data[n=11+1000]=f7569000)
AtapiVirtToPhysAddr_: f7569000 -> 00000000:00b04000
  get Phys(data[n=11+2000]=f756a000)
AtapiVirtToPhysAddr_: f756a000 -> 00000000:00b05000
  get Phys(data[n=11+3000]=f756b000)
AtapiVirtToPhysAddr_: f756b000 -> 00000000:00afe000
  get Phys(data[n=12+1000]=f756c000)
AtapiVirtToPhysAddr_: f756c000 -> 00000000:00b1f000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x161c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x161c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 169c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 169c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f756c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f756c020)
AtapiVirtToPhysAddr_: f756c020 -> 00000000:00b1f020
  get Phys(data[n=1+fe0]=f756d000)
AtapiVirtToPhysAddr_: f756d000 -> 00000000:00b08000
  get Phys(data[n=2+1000]=f756e000)
AtapiVirtToPhysAddr_: f756e000 -> 00000000:00b21000
  get Phys(data[n=3+1000]=f756f000)
AtapiVirtToPhysAddr_: f756f000 -> 00000000:00b1a000
  get Phys(data[n=4+1000]=f7570000)
AtapiVirtToPhysAddr_: f7570000 -> 00000000:00afb000
  get Phys(data[n=5+1000]=f7571000)
AtapiVirtToPhysAddr_: f7571000 -> 00000000:00afc000
  get Phys(data[n=5+2000]=f7572000)
AtapiVirtToPhysAddr_: f7572000 -> 00000000:00afd000
  get Phys(data[n=5+3000]=f7573000)
AtapiVirtToPhysAddr_: f7573000 -> 00000000:00af6000
  get Phys(data[n=6+1000]=f7574000)
AtapiVirtToPhysAddr_: f7574000 -> 00000000:00b17000
  get Phys(data[n=7+1000]=f7575000)
AtapiVirtToPhysAddr_: f7575000 -> 00000000:00b00000
  get Phys(data[n=8+1000]=f7576000)
AtapiVirtToPhysAddr_: f7576000 -> 00000000:00b19000
  get Phys(data[n=9+1000]=f7577000)
AtapiVirtToPhysAddr_: f7577000 -> 00000000:00b12000
  get Phys(data[n=10+1000]=f7578000)
AtapiVirtToPhysAddr_: f7578000 -> 00000000:00af3000
  get Phys(data[n=11+1000]=f7579000)
AtapiVirtToPhysAddr_: f7579000 -> 00000000:00af4000
  get Phys(data[n=11+2000]=f757a000)
AtapiVirtToPhysAddr_: f757a000 -> 00000000:00af5000
  get Phys(data[n=11+3000]=f757b000)
AtapiVirtToPhysAddr_: f757b000 -> 00000000:00aee000
  get Phys(data[n=12+1000]=f757c000)
AtapiVirtToPhysAddr_: f757c000 -> 00000000:00b0f000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x169c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x169c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 171c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 171c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f757c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f757c020)
AtapiVirtToPhysAddr_: f757c020 -> 00000000:00b0f020
  get Phys(data[n=1+fe0]=f757d000)
AtapiVirtToPhysAddr_: f757d000 -> 00000000:00af8000
  get Phys(data[n=2+1000]=f757e000)
AtapiVirtToPhysAddr_: f757e000 -> 00000000:00b11000
  get Phys(data[n=3+1000]=f757f000)
AtapiVirtToPhysAddr_: f757f000 -> 00000000:00b0a000
  get Phys(data[n=4+1000]=f7580000)
AtapiVirtToPhysAddr_: f7580000 -> 00000000:00aeb000
  get Phys(data[n=5+1000]=f7581000)
AtapiVirtToPhysAddr_: f7581000 -> 00000000:00aec000
  get Phys(data[n=5+2000]=f7582000)
AtapiVirtToPhysAddr_: f7582000 -> 00000000:00aed000
  get Phys(data[n=5+3000]=f7583000)
AtapiVirtToPhysAddr_: f7583000 -> 00000000:00ae6000
  get Phys(data[n=6+1000]=f7584000)
AtapiVirtToPhysAddr_: f7584000 -> 00000000:00b07000
  get Phys(data[n=7+1000]=f7585000)
AtapiVirtToPhysAddr_: f7585000 -> 00000000:00af0000
  get Phys(data[n=8+1000]=f7586000)
AtapiVirtToPhysAddr_: f7586000 -> 00000000:00b09000
  get Phys(data[n=9+1000]=f7587000)
AtapiVirtToPhysAddr_: f7587000 -> 00000000:00b02000
  get Phys(data[n=10+1000]=f7588000)
AtapiVirtToPhysAddr_: f7588000 -> 00000000:00ae3000
  get Phys(data[n=11+1000]=f7589000)
AtapiVirtToPhysAddr_: f7589000 -> 00000000:00ae4000
  get Phys(data[n=11+2000]=f758a000)
AtapiVirtToPhysAddr_: f758a000 -> 00000000:00ae5000
  get Phys(data[n=11+3000]=f758b000)
AtapiVirtToPhysAddr_: f758b000 -> 00000000:00ade000
  get Phys(data[n=12+1000]=f758c000)
AtapiVirtToPhysAddr_: f758c000 -> 00000000:00aff000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x171c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x171c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 179c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 179c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f758c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f758c020)
AtapiVirtToPhysAddr_: f758c020 -> 00000000:00aff020
  get Phys(data[n=1+fe0]=f758d000)
AtapiVirtToPhysAddr_: f758d000 -> 00000000:00ae8000
  get Phys(data[n=2+1000]=f758e000)
AtapiVirtToPhysAddr_: f758e000 -> 00000000:00b01000
  get Phys(data[n=3+1000]=f758f000)
AtapiVirtToPhysAddr_: f758f000 -> 00000000:00afa000
  get Phys(data[n=4+1000]=f7590000)
AtapiVirtToPhysAddr_: f7590000 -> 00000000:00adb000
  get Phys(data[n=5+1000]=f7591000)
AtapiVirtToPhysAddr_: f7591000 -> 00000000:00adc000
  get Phys(data[n=5+2000]=f7592000)
AtapiVirtToPhysAddr_: f7592000 -> 00000000:00add000
  get Phys(data[n=5+3000]=f7593000)
AtapiVirtToPhysAddr_: f7593000 -> 00000000:00ad6000
  get Phys(data[n=6+1000]=f7594000)
AtapiVirtToPhysAddr_: f7594000 -> 00000000:00af7000
  get Phys(data[n=7+1000]=f7595000)
AtapiVirtToPhysAddr_: f7595000 -> 00000000:00ae0000
  get Phys(data[n=8+1000]=f7596000)
AtapiVirtToPhysAddr_: f7596000 -> 00000000:00af9000
  get Phys(data[n=9+1000]=f7597000)
AtapiVirtToPhysAddr_: f7597000 -> 00000000:00af2000
  get Phys(data[n=10+1000]=f7598000)
AtapiVirtToPhysAddr_: f7598000 -> 00000000:00ad3000
  get Phys(data[n=11+1000]=f7599000)
AtapiVirtToPhysAddr_: f7599000 -> 00000000:00ad4000
  get Phys(data[n=11+2000]=f759a000)
AtapiVirtToPhysAddr_: f759a000 -> 00000000:00ad5000
  get Phys(data[n=11+3000]=f759b000)
AtapiVirtToPhysAddr_: f759b000 -> 00000000:00ace000
  get Phys(data[n=12+1000]=f759c000)
AtapiVirtToPhysAddr_: f759c000 -> 00000000:00aef000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x179c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x179c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 181c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 181c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f759c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f759c020)
AtapiVirtToPhysAddr_: f759c020 -> 00000000:00aef020
  get Phys(data[n=1+fe0]=f759d000)
AtapiVirtToPhysAddr_: f759d000 -> 00000000:00ad8000
  get Phys(data[n=2+1000]=f759e000)
AtapiVirtToPhysAddr_: f759e000 -> 00000000:00af1000
  get Phys(data[n=3+1000]=f759f000)
AtapiVirtToPhysAddr_: f759f000 -> 00000000:00aea000
  get Phys(data[n=4+1000]=f75a0000)
AtapiVirtToPhysAddr_: f75a0000 -> 00000000:00acb000
  get Phys(data[n=5+1000]=f75a1000)
AtapiVirtToPhysAddr_: f75a1000 -> 00000000:00acc000
  get Phys(data[n=5+2000]=f75a2000)
AtapiVirtToPhysAddr_: f75a2000 -> 00000000:00acd000
  get Phys(data[n=5+3000]=f75a3000)
AtapiVirtToPhysAddr_: f75a3000 -> 00000000:00ac6000
  get Phys(data[n=6+1000]=f75a4000)
AtapiVirtToPhysAddr_: f75a4000 -> 00000000:00ae7000
  get Phys(data[n=7+1000]=f75a5000)
AtapiVirtToPhysAddr_: f75a5000 -> 00000000:00ad0000
  get Phys(data[n=8+1000]=f75a6000)
AtapiVirtToPhysAddr_: f75a6000 -> 00000000:00ae9000
  get Phys(data[n=9+1000]=f75a7000)
AtapiVirtToPhysAddr_: f75a7000 -> 00000000:00ae2000
  get Phys(data[n=10+1000]=f75a8000)
AtapiVirtToPhysAddr_: f75a8000 -> 00000000:00ac3000
  get Phys(data[n=11+1000]=f75a9000)
AtapiVirtToPhysAddr_: f75a9000 -> 00000000:00ac4000
  get Phys(data[n=11+2000]=f75aa000)
AtapiVirtToPhysAddr_: f75aa000 -> 00000000:00ac5000
  get Phys(data[n=11+3000]=f75ab000)
AtapiVirtToPhysAddr_: f75ab000 -> 00000000:00abe000
  get Phys(data[n=12+1000]=f75ac000)
AtapiVirtToPhysAddr_: f75ac000 -> 00000000:00adf000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x181c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x181c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 189c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 189c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f75ac020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f75ac020)
AtapiVirtToPhysAddr_: f75ac020 -> 00000000:00adf020
  get Phys(data[n=1+fe0]=f75ad000)
AtapiVirtToPhysAddr_: f75ad000 -> 00000000:00ac8000
  get Phys(data[n=2+1000]=f75ae000)
AtapiVirtToPhysAddr_: f75ae000 -> 00000000:00ae1000
  get Phys(data[n=3+1000]=f75af000)
AtapiVirtToPhysAddr_: f75af000 -> 00000000:00ada000
  get Phys(data[n=4+1000]=f75b0000)
AtapiVirtToPhysAddr_: f75b0000 -> 00000000:00abb000
  get Phys(data[n=5+1000]=f75b1000)
AtapiVirtToPhysAddr_: f75b1000 -> 00000000:00abc000
  get Phys(data[n=5+2000]=f75b2000)
AtapiVirtToPhysAddr_: f75b2000 -> 00000000:00abd000
  get Phys(data[n=5+3000]=f75b3000)
AtapiVirtToPhysAddr_: f75b3000 -> 00000000:00ab6000
  get Phys(data[n=6+1000]=f75b4000)
AtapiVirtToPhysAddr_: f75b4000 -> 00000000:00ad7000
  get Phys(data[n=7+1000]=f75b5000)
AtapiVirtToPhysAddr_: f75b5000 -> 00000000:00ac0000
  get Phys(data[n=8+1000]=f75b6000)
AtapiVirtToPhysAddr_: f75b6000 -> 00000000:00ad9000
  get Phys(data[n=9+1000]=f75b7000)
AtapiVirtToPhysAddr_: f75b7000 -> 00000000:00ad2000
  get Phys(data[n=10+1000]=f75b8000)
AtapiVirtToPhysAddr_: f75b8000 -> 00000000:00ab3000
  get Phys(data[n=11+1000]=f75b9000)
AtapiVirtToPhysAddr_: f75b9000 -> 00000000:00ab4000
  get Phys(data[n=11+2000]=f75ba000)
AtapiVirtToPhysAddr_: f75ba000 -> 00000000:00ab5000
  get Phys(data[n=11+3000]=f75bb000)
AtapiVirtToPhysAddr_: f75bb000 -> 00000000:00aae000
  get Phys(data[n=12+1000]=f75bc000)
AtapiVirtToPhysAddr_: f75bc000 -> 00000000:00acf000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x189c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x189c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 191c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 191c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f75bc020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f75bc020)
AtapiVirtToPhysAddr_: f75bc020 -> 00000000:00acf020
  get Phys(data[n=1+fe0]=f75bd000)
AtapiVirtToPhysAddr_: f75bd000 -> 00000000:00ab8000
  get Phys(data[n=2+1000]=f75be000)
AtapiVirtToPhysAddr_: f75be000 -> 00000000:00ad1000
  get Phys(data[n=3+1000]=f75bf000)
AtapiVirtToPhysAddr_: f75bf000 -> 00000000:00aca000
  get Phys(data[n=4+1000]=f75c0000)
AtapiVirtToPhysAddr_: f75c0000 -> 00000000:00aab000
  get Phys(data[n=5+1000]=f75c1000)
AtapiVirtToPhysAddr_: f75c1000 -> 00000000:00aac000
  get Phys(data[n=5+2000]=f75c2000)
AtapiVirtToPhysAddr_: f75c2000 -> 00000000:00aad000
  get Phys(data[n=5+3000]=f75c3000)
AtapiVirtToPhysAddr_: f75c3000 -> 00000000:00aa6000
  get Phys(data[n=6+1000]=f75c4000)
AtapiVirtToPhysAddr_: f75c4000 -> 00000000:00ac7000
  get Phys(data[n=7+1000]=f75c5000)
AtapiVirtToPhysAddr_: f75c5000 -> 00000000:00ab0000
  get Phys(data[n=8+1000]=f75c6000)
AtapiVirtToPhysAddr_: f75c6000 -> 00000000:00ac9000
  get Phys(data[n=9+1000]=f75c7000)
AtapiVirtToPhysAddr_: f75c7000 -> 00000000:00ac2000
  get Phys(data[n=10+1000]=f75c8000)
AtapiVirtToPhysAddr_: f75c8000 -> 00000000:00aa3000
  get Phys(data[n=11+1000]=f75c9000)
AtapiVirtToPhysAddr_: f75c9000 -> 00000000:00aa4000
  get Phys(data[n=11+2000]=f75ca000)
AtapiVirtToPhysAddr_: f75ca000 -> 00000000:00aa5000
  get Phys(data[n=11+3000]=f75cb000)
AtapiVirtToPhysAddr_: f75cb000 -> 00000000:00a9e000
  get Phys(data[n=12+1000]=f75cc000)
AtapiVirtToPhysAddr_: f75cc000 -> 00000000:00abf000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x191c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x191c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 199c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 199c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f75cc020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f75cc020)
AtapiVirtToPhysAddr_: f75cc020 -> 00000000:00abf020
  get Phys(data[n=1+fe0]=f75cd000)
AtapiVirtToPhysAddr_: f75cd000 -> 00000000:00aa8000
  get Phys(data[n=2+1000]=f75ce000)
AtapiVirtToPhysAddr_: f75ce000 -> 00000000:00ac1000
  get Phys(data[n=3+1000]=f75cf000)
AtapiVirtToPhysAddr_: f75cf000 -> 00000000:00aba000
  get Phys(data[n=4+1000]=f75d0000)
AtapiVirtToPhysAddr_: f75d0000 -> 00000000:00a9b000
  get Phys(data[n=5+1000]=f75d1000)
AtapiVirtToPhysAddr_: f75d1000 -> 00000000:00a9c000
  get Phys(data[n=5+2000]=f75d2000)
AtapiVirtToPhysAddr_: f75d2000 -> 00000000:00a9d000
  get Phys(data[n=5+3000]=f75d3000)
AtapiVirtToPhysAddr_: f75d3000 -> 00000000:00a96000
  get Phys(data[n=6+1000]=f75d4000)
AtapiVirtToPhysAddr_: f75d4000 -> 00000000:00ab7000
  get Phys(data[n=7+1000]=f75d5000)
AtapiVirtToPhysAddr_: f75d5000 -> 00000000:00aa0000
  get Phys(data[n=8+1000]=f75d6000)
AtapiVirtToPhysAddr_: f75d6000 -> 00000000:00ab9000
  get Phys(data[n=9+1000]=f75d7000)
AtapiVirtToPhysAddr_: f75d7000 -> 00000000:00ab2000
  get Phys(data[n=10+1000]=f75d8000)
AtapiVirtToPhysAddr_: f75d8000 -> 00000000:00a93000
  get Phys(data[n=11+1000]=f75d9000)
AtapiVirtToPhysAddr_: f75d9000 -> 00000000:00a94000
  get Phys(data[n=11+2000]=f75da000)
AtapiVirtToPhysAddr_: f75da000 -> 00000000:00a95000
  get Phys(data[n=11+3000]=f75db000)
AtapiVirtToPhysAddr_: f75db000 -> 00000000:00a8e000
  get Phys(data[n=12+1000]=f75dc000)
AtapiVirtToPhysAddr_: f75dc000 -> 00000000:00aaf000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x199c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x199c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1a1c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 1a1c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f75dc020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f75dc020)
AtapiVirtToPhysAddr_: f75dc020 -> 00000000:00aaf020
  get Phys(data[n=1+fe0]=f75dd000)
AtapiVirtToPhysAddr_: f75dd000 -> 00000000:00a98000
  get Phys(data[n=2+1000]=f75de000)
AtapiVirtToPhysAddr_: f75de000 -> 00000000:00ab1000
  get Phys(data[n=3+1000]=f75df000)
AtapiVirtToPhysAddr_: f75df000 -> 00000000:00aaa000
  get Phys(data[n=4+1000]=f75e0000)
AtapiVirtToPhysAddr_: f75e0000 -> 00000000:00a8b000
  get Phys(data[n=5+1000]=f75e1000)
AtapiVirtToPhysAddr_: f75e1000 -> 00000000:00a8c000
  get Phys(data[n=5+2000]=f75e2000)
AtapiVirtToPhysAddr_: f75e2000 -> 00000000:00a8d000
  get Phys(data[n=5+3000]=f75e3000)
AtapiVirtToPhysAddr_: f75e3000 -> 00000000:00a86000
  get Phys(data[n=6+1000]=f75e4000)
AtapiVirtToPhysAddr_: f75e4000 -> 00000000:00aa7000
  get Phys(data[n=7+1000]=f75e5000)
AtapiVirtToPhysAddr_: f75e5000 -> 00000000:00a90000
  get Phys(data[n=8+1000]=f75e6000)
AtapiVirtToPhysAddr_: f75e6000 -> 00000000:00aa9000
  get Phys(data[n=9+1000]=f75e7000)
AtapiVirtToPhysAddr_: f75e7000 -> 00000000:00aa2000
  get Phys(data[n=10+1000]=f75e8000)
AtapiVirtToPhysAddr_: f75e8000 -> 00000000:00a83000
  get Phys(data[n=11+1000]=f75e9000)
AtapiVirtToPhysAddr_: f75e9000 -> 00000000:00a84000
  get Phys(data[n=11+2000]=f75ea000)
AtapiVirtToPhysAddr_: f75ea000 -> 00000000:00a85000
  get Phys(data[n=11+3000]=f75eb000)
AtapiVirtToPhysAddr_: f75eb000 -> 00000000:00a7e000
  get Phys(data[n=12+1000]=f75ec000)
AtapiVirtToPhysAddr_: f75ec000 -> 00000000:00a9f000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1a1c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1a1c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1a9c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 1a9c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f75ec020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f75ec020)
AtapiVirtToPhysAddr_: f75ec020 -> 00000000:00a9f020
  get Phys(data[n=1+fe0]=f75ed000)
AtapiVirtToPhysAddr_: f75ed000 -> 00000000:00a88000
  get Phys(data[n=2+1000]=f75ee000)
AtapiVirtToPhysAddr_: f75ee000 -> 00000000:00aa1000
  get Phys(data[n=3+1000]=f75ef000)
AtapiVirtToPhysAddr_: f75ef000 -> 00000000:00a9a000
  get Phys(data[n=4+1000]=f75f0000)
AtapiVirtToPhysAddr_: f75f0000 -> 00000000:00a7b000
  get Phys(data[n=5+1000]=f75f1000)
AtapiVirtToPhysAddr_: f75f1000 -> 00000000:00a7c000
  get Phys(data[n=5+2000]=f75f2000)
AtapiVirtToPhysAddr_: f75f2000 -> 00000000:00a7d000
  get Phys(data[n=5+3000]=f75f3000)
AtapiVirtToPhysAddr_: f75f3000 -> 00000000:00a76000
  get Phys(data[n=6+1000]=f75f4000)
AtapiVirtToPhysAddr_: f75f4000 -> 00000000:00a97000
  get Phys(data[n=7+1000]=f75f5000)
AtapiVirtToPhysAddr_: f75f5000 -> 00000000:00a80000
  get Phys(data[n=8+1000]=f75f6000)
AtapiVirtToPhysAddr_: f75f6000 -> 00000000:00a99000
  get Phys(data[n=9+1000]=f75f7000)
AtapiVirtToPhysAddr_: f75f7000 -> 00000000:00a92000
  get Phys(data[n=10+1000]=f75f8000)
AtapiVirtToPhysAddr_: f75f8000 -> 00000000:00a73000
  get Phys(data[n=11+1000]=f75f9000)
AtapiVirtToPhysAddr_: f75f9000 -> 00000000:00a74000
  get Phys(data[n=11+2000]=f75fa000)
AtapiVirtToPhysAddr_: f75fa000 -> 00000000:00a75000
  get Phys(data[n=11+3000]=f75fb000)
AtapiVirtToPhysAddr_: f75fb000 -> 00000000:00a6e000
  get Phys(data[n=12+1000]=f75fc000)
AtapiVirtToPhysAddr_: f75fc000 -> 00000000:00a8f000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1a9c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1a9c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1b1c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 1b1c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f75fc020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f75fc020)
AtapiVirtToPhysAddr_: f75fc020 -> 00000000:00a8f020
  get Phys(data[n=1+fe0]=f75fd000)
AtapiVirtToPhysAddr_: f75fd000 -> 00000000:00a78000
  get Phys(data[n=2+1000]=f75fe000)
AtapiVirtToPhysAddr_: f75fe000 -> 00000000:00a91000
  get Phys(data[n=3+1000]=f75ff000)
AtapiVirtToPhysAddr_: f75ff000 -> 00000000:00a8a000
  get Phys(data[n=4+1000]=f7600000)
AtapiVirtToPhysAddr_: f7600000 -> 00000000:00a6b000
  get Phys(data[n=5+1000]=f7601000)
AtapiVirtToPhysAddr_: f7601000 -> 00000000:00a6c000
  get Phys(data[n=5+2000]=f7602000)
AtapiVirtToPhysAddr_: f7602000 -> 00000000:00a6d000
  get Phys(data[n=5+3000]=f7603000)
AtapiVirtToPhysAddr_: f7603000 -> 00000000:00a66000
  get Phys(data[n=6+1000]=f7604000)
AtapiVirtToPhysAddr_: f7604000 -> 00000000:00a87000
  get Phys(data[n=7+1000]=f7605000)
AtapiVirtToPhysAddr_: f7605000 -> 00000000:00a70000
  get Phys(data[n=8+1000]=f7606000)
AtapiVirtToPhysAddr_: f7606000 -> 00000000:00a89000
  get Phys(data[n=9+1000]=f7607000)
AtapiVirtToPhysAddr_: f7607000 -> 00000000:00a82000
  get Phys(data[n=10+1000]=f7608000)
AtapiVirtToPhysAddr_: f7608000 -> 00000000:00a63000
  get Phys(data[n=11+1000]=f7609000)
AtapiVirtToPhysAddr_: f7609000 -> 00000000:00a64000
  get Phys(data[n=11+2000]=f760a000)
AtapiVirtToPhysAddr_: f760a000 -> 00000000:00a65000
  get Phys(data[n=11+3000]=f760b000)
AtapiVirtToPhysAddr_: f760b000 -> 00000000:00a5e000
  get Phys(data[n=12+1000]=f760c000)
AtapiVirtToPhysAddr_: f760c000 -> 00000000:00a7f000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1b1c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1b1c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1b9c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 1b9c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f760c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f760c020)
AtapiVirtToPhysAddr_: f760c020 -> 00000000:00a7f020
  get Phys(data[n=1+fe0]=f760d000)
AtapiVirtToPhysAddr_: f760d000 -> 00000000:00a68000
  get Phys(data[n=2+1000]=f760e000)
AtapiVirtToPhysAddr_: f760e000 -> 00000000:00a81000
  get Phys(data[n=3+1000]=f760f000)
AtapiVirtToPhysAddr_: f760f000 -> 00000000:00a7a000
  get Phys(data[n=4+1000]=f7610000)
AtapiVirtToPhysAddr_: f7610000 -> 00000000:00a5b000
  get Phys(data[n=5+1000]=f7611000)
AtapiVirtToPhysAddr_: f7611000 -> 00000000:00a5c000
  get Phys(data[n=5+2000]=f7612000)
AtapiVirtToPhysAddr_: f7612000 -> 00000000:00a5d000
  get Phys(data[n=5+3000]=f7613000)
AtapiVirtToPhysAddr_: f7613000 -> 00000000:00a56000
  get Phys(data[n=6+1000]=f7614000)
AtapiVirtToPhysAddr_: f7614000 -> 00000000:00a77000
  get Phys(data[n=7+1000]=f7615000)
AtapiVirtToPhysAddr_: f7615000 -> 00000000:00a60000
  get Phys(data[n=8+1000]=f7616000)
AtapiVirtToPhysAddr_: f7616000 -> 00000000:00a79000
  get Phys(data[n=9+1000]=f7617000)
AtapiVirtToPhysAddr_: f7617000 -> 00000000:00a72000
  get Phys(data[n=10+1000]=f7618000)
AtapiVirtToPhysAddr_: f7618000 -> 00000000:00a53000
  get Phys(data[n=11+1000]=f7619000)
AtapiVirtToPhysAddr_: f7619000 -> 00000000:00a54000
  get Phys(data[n=11+2000]=f761a000)
AtapiVirtToPhysAddr_: f761a000 -> 00000000:00a55000
  get Phys(data[n=11+3000]=f761b000)
AtapiVirtToPhysAddr_: f761b000 -> 00000000:00a4e000
  get Phys(data[n=12+1000]=f761c000)
AtapiVirtToPhysAddr_: f761c000 -> 00000000:00a6f000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1b9c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1b9c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1c1c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 1c1c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f761c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f761c020)
AtapiVirtToPhysAddr_: f761c020 -> 00000000:00a6f020
  get Phys(data[n=1+fe0]=f761d000)
AtapiVirtToPhysAddr_: f761d000 -> 00000000:00a58000
  get Phys(data[n=2+1000]=f761e000)
AtapiVirtToPhysAddr_: f761e000 -> 00000000:00a71000
  get Phys(data[n=3+1000]=f761f000)
AtapiVirtToPhysAddr_: f761f000 -> 00000000:00a6a000
  get Phys(data[n=4+1000]=f7620000)
AtapiVirtToPhysAddr_: f7620000 -> 00000000:00a4b000
  get Phys(data[n=5+1000]=f7621000)
AtapiVirtToPhysAddr_: f7621000 -> 00000000:00a4c000
  get Phys(data[n=5+2000]=f7622000)
AtapiVirtToPhysAddr_: f7622000 -> 00000000:00a4d000
  get Phys(data[n=5+3000]=f7623000)
AtapiVirtToPhysAddr_: f7623000 -> 00000000:00a46000
  get Phys(data[n=6+1000]=f7624000)
AtapiVirtToPhysAddr_: f7624000 -> 00000000:00a67000
  get Phys(data[n=7+1000]=f7625000)
AtapiVirtToPhysAddr_: f7625000 -> 00000000:00a50000
  get Phys(data[n=8+1000]=f7626000)
AtapiVirtToPhysAddr_: f7626000 -> 00000000:00a69000
  get Phys(data[n=9+1000]=f7627000)
AtapiVirtToPhysAddr_: f7627000 -> 00000000:00a62000
  get Phys(data[n=10+1000]=f7628000)
AtapiVirtToPhysAddr_: f7628000 -> 00000000:00a43000
  get Phys(data[n=11+1000]=f7629000)
AtapiVirtToPhysAddr_: f7629000 -> 00000000:00a44000
  get Phys(data[n=11+2000]=f762a000)
AtapiVirtToPhysAddr_: f762a000 -> 00000000:00a45000
  get Phys(data[n=11+3000]=f762b000)
AtapiVirtToPhysAddr_: f762b000 -> 00000000:00a3e000
  get Phys(data[n=12+1000]=f762c000)
AtapiVirtToPhysAddr_: f762c000 -> 00000000:00a5f000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1c1c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1c1c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1c9c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 1c9c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f762c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f762c020)
AtapiVirtToPhysAddr_: f762c020 -> 00000000:00a5f020
  get Phys(data[n=1+fe0]=f762d000)
AtapiVirtToPhysAddr_: f762d000 -> 00000000:00a48000
  get Phys(data[n=2+1000]=f762e000)
AtapiVirtToPhysAddr_: f762e000 -> 00000000:00a61000
  get Phys(data[n=3+1000]=f762f000)
AtapiVirtToPhysAddr_: f762f000 -> 00000000:00a5a000
  get Phys(data[n=4+1000]=f7630000)
AtapiVirtToPhysAddr_: f7630000 -> 00000000:00a3b000
  get Phys(data[n=5+1000]=f7631000)
AtapiVirtToPhysAddr_: f7631000 -> 00000000:00a3c000
  get Phys(data[n=5+2000]=f7632000)
AtapiVirtToPhysAddr_: f7632000 -> 00000000:00a3d000
  get Phys(data[n=5+3000]=f7633000)
AtapiVirtToPhysAddr_: f7633000 -> 00000000:00a36000
  get Phys(data[n=6+1000]=f7634000)
AtapiVirtToPhysAddr_: f7634000 -> 00000000:00a57000
  get Phys(data[n=7+1000]=f7635000)
AtapiVirtToPhysAddr_: f7635000 -> 00000000:00a40000
  get Phys(data[n=8+1000]=f7636000)
AtapiVirtToPhysAddr_: f7636000 -> 00000000:00a59000
  get Phys(data[n=9+1000]=f7637000)
AtapiVirtToPhysAddr_: f7637000 -> 00000000:00a52000
  get Phys(data[n=10+1000]=f7638000)
AtapiVirtToPhysAddr_: f7638000 -> 00000000:00a33000
  get Phys(data[n=11+1000]=f7639000)
AtapiVirtToPhysAddr_: f7639000 -> 00000000:00a34000
  get Phys(data[n=11+2000]=f763a000)
AtapiVirtToPhysAddr_: f763a000 -> 00000000:00a35000
  get Phys(data[n=11+3000]=f763b000)
AtapiVirtToPhysAddr_: f763b000 -> 00000000:00a2e000
  get Phys(data[n=12+1000]=f763c000)
AtapiVirtToPhysAddr_: f763c000 -> 00000000:00a4f000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1c9c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1c9c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1d1c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 1d1c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f763c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f763c020)
AtapiVirtToPhysAddr_: f763c020 -> 00000000:00a4f020
  get Phys(data[n=1+fe0]=f763d000)
AtapiVirtToPhysAddr_: f763d000 -> 00000000:00a38000
  get Phys(data[n=2+1000]=f763e000)
AtapiVirtToPhysAddr_: f763e000 -> 00000000:00a51000
  get Phys(data[n=3+1000]=f763f000)
AtapiVirtToPhysAddr_: f763f000 -> 00000000:00a4a000
  get Phys(data[n=4+1000]=f7640000)
AtapiVirtToPhysAddr_: f7640000 -> 00000000:00a2b000
  get Phys(data[n=5+1000]=f7641000)
AtapiVirtToPhysAddr_: f7641000 -> 00000000:00a2c000
  get Phys(data[n=5+2000]=f7642000)
AtapiVirtToPhysAddr_: f7642000 -> 00000000:00a2d000
  get Phys(data[n=5+3000]=f7643000)
AtapiVirtToPhysAddr_: f7643000 -> 00000000:00a26000
  get Phys(data[n=6+1000]=f7644000)
AtapiVirtToPhysAddr_: f7644000 -> 00000000:00a47000
  get Phys(data[n=7+1000]=f7645000)
AtapiVirtToPhysAddr_: f7645000 -> 00000000:00a30000
  get Phys(data[n=8+1000]=f7646000)
AtapiVirtToPhysAddr_: f7646000 -> 00000000:00a49000
  get Phys(data[n=9+1000]=f7647000)
AtapiVirtToPhysAddr_: f7647000 -> 00000000:00a42000
  get Phys(data[n=10+1000]=f7648000)
AtapiVirtToPhysAddr_: f7648000 -> 00000000:00a23000
  get Phys(data[n=11+1000]=f7649000)
AtapiVirtToPhysAddr_: f7649000 -> 00000000:00a24000
  get Phys(data[n=11+2000]=f764a000)
AtapiVirtToPhysAddr_: f764a000 -> 00000000:00a25000
  get Phys(data[n=11+3000]=f764b000)
AtapiVirtToPhysAddr_: f764b000 -> 00000000:00a1e000
  get Phys(data[n=12+1000]=f764c000)
AtapiVirtToPhysAddr_: f764c000 -> 00000000:00a3f000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1d1c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1d1c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1d9c, OrigWordsRequested 0x3d00, DevSize 0x3d
IdeReadWrite (REQ): Starting sector is 1d9c, Number of WORDS 0x3d00, DevSize 0x3d
AtapiDmaSetup: mode 0x44, data f764c020, count 7a00, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f764c020)
AtapiVirtToPhysAddr_: f764c020 -> 00000000:00a3f020
  get Phys(data[n=1+fe0]=f764d000)
AtapiVirtToPhysAddr_: f764d000 -> 00000000:00a28000
  get Phys(data[n=2+1000]=f764e000)
AtapiVirtToPhysAddr_: f764e000 -> 00000000:00a41000
  get Phys(data[n=3+1000]=f764f000)
AtapiVirtToPhysAddr_: f764f000 -> 00000000:00a3a000
  get Phys(data[n=4+1000]=f7650000)
AtapiVirtToPhysAddr_: f7650000 -> 00000000:00a1b000
  get Phys(data[n=5+1000]=f7651000)
AtapiVirtToPhysAddr_: f7651000 -> 00000000:00a1c000
  get Phys(data[n=5+2000]=f7652000)
AtapiVirtToPhysAddr_: f7652000 -> 00000000:00a1d000
  get Phys(data[n=5+3000]=f7653000)
AtapiVirtToPhysAddr_: f7653000 -> 00000000:00a16000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1d9c, Count 0x3d(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1d9c count 0x3d feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 7a00, full size 7a00
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dd9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dd9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f7685540, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f7685540)
AtapiVirtToPhysAddr_: f7685540 -> 00000000:00ee0540
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dd9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dd9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dd9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dd9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dd9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dd9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dd9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dd9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dd9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dd9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dd9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dd9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dd9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dd9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dd9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dd9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dd9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dd9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dd9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dd9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dd9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dd9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dd9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dd9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dd9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dd9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dd9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dd9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dd9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dd9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dd9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dd9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dd9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dd9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dd9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dd9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dd9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dd9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dd9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dd9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dd9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dd9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dd9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dd9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dd9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dd9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dd9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dd9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dd9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dd9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dd9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dd9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dd9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dd9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dd9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dd9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dd9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dd9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dd9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dd9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dd9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dd9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dda, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dda, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dda, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dda count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dda, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dda, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dda, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dda count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dda, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dda, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dda, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dda count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dda, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dda, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dda, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dda count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dda, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dda, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dda, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dda count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dda, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dda, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dda, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dda count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dda, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dda, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dda, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dda count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dda, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dda, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dda, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dda count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dda, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dda, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dda, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dda count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dda, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dda, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dda, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dda count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dda, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dda, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dda, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dda count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dda, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dda, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dda, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dda count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dda, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dda, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dda, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dda count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dda, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dda, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dda, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dda count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dda, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dda, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dda, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dda count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dda, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dda, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dda, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dda count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddc, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddc, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddc count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddc, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddc, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddc count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddc, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddc, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddc count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddc, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddc, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddc count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddc, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddc, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddc count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddc, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddc, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddc count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddc, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddc, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddc count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddc, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddc, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddc count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddc, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddc, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddc count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddc, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddc, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddc count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddc, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddc, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddc count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddc, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddc, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddc count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddc, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddc, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddc count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddc, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddc, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddc count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddc, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddc, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddc count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddc, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddc, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddc count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddd, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddd, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddd count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddd, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddd, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddd count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddd, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddd, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddd count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddd, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddd, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddd count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddd, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddd, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddd count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddd, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddd, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddd count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddd, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddd, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddd count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddd, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddd, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddd count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddd, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddd, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddd count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddd, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddd, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddd count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddd, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddd, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddd count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddd, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddd, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddd count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddd, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddd, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddd count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddd, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddd, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddd count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddd, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddd, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddd count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddd, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddd, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddd count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dde, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dde, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dde, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dde count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dde, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dde, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dde, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dde count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dde, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dde, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dde, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dde count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dde, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dde, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dde, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dde count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dde, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dde, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dde, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dde count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dde, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dde, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dde, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dde count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dde, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dde, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dde, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dde count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dde, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dde, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dde, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dde count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dde, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dde, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dde, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dde count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dde, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dde, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dde, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dde count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dde, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dde, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dde, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dde count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dde, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dde, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dde, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dde count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dde, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dde, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dde, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dde count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dde, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dde, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dde, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dde count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dde, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dde, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dde, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dde count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dde, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dde, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dde, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dde count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddf, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddf, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddf count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddf, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddf, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddf count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddf, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddf, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddf count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddf, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddf, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddf count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddf, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddf, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddf count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddf, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddf, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddf count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddf, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddf, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddf count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddf, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddf, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddf count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddf, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddf, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddf count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddf, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddf, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddf count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddf, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddf, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddf count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddf, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddf, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddf count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddf, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddf, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddf count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddf, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddf, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddf count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddf, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddf, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddf count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddf, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddf, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddf count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dea, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dea, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dea, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dea count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dea, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dea, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dea, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dea count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dea, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dea, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dea, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dea count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dea, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dea, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dea, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dea count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dea, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dea, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dea, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dea count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dea, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dea, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dea, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dea count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dea, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dea, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dea, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dea count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dea, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dea, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dea, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dea count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dea, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dea, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dea, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dea count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dea, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dea, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dea, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dea count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dea, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dea, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dea, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dea count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dea, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dea, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dea, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dea count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dea, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dea, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dea, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dea count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dea, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dea, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dea, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dea count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dea, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dea, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dea, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dea count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dea, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dea, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dea, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dea count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1deb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1deb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1deb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1deb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1deb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1deb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1deb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1deb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1deb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1deb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1deb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1deb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1deb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1deb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1deb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1deb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1deb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1deb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1deb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1deb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1deb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1deb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1deb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1deb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1deb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1deb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1deb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1deb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1deb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1deb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1deb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1deb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1deb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1deb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1deb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1deb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1deb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1deb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1deb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1deb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1deb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1deb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1deb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1deb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1deb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1deb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1deb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1deb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1deb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1deb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1deb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1deb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1deb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1deb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1deb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1deb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1deb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1deb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1deb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1deb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1deb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1deb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1deb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1deb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dec, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dec, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dec, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dec count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dec, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dec, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dec, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dec count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dec, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dec, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dec, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dec count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dec, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dec, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dec, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dec count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dec, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dec, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dec, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dec count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dec, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dec, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dec, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dec count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dec, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dec, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dec, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dec count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dec, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dec, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dec, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dec count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dec, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dec, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dec, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dec count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dec, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dec, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dec, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dec count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dec, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dec, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dec, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dec count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dec, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dec, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dec, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dec count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dec, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dec, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dec, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dec count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dec, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dec, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dec, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dec count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dec, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dec, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dec, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dec count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dec, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dec, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dec, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dec count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ded, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ded, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ded, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ded count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ded, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ded, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ded, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ded count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ded, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ded, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ded, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ded count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ded, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ded, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ded, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ded count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ded, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ded, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ded, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ded count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ded, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ded, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ded, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ded count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ded, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ded, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ded, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ded count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ded, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ded, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ded, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ded count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ded, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ded, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ded, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ded count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ded, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ded, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ded, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ded count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ded, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ded, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ded, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ded count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ded, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ded, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ded, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ded count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ded, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ded, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ded, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ded count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ded, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ded, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ded, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ded count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ded, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ded, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ded, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ded count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ded, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ded, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ded, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ded count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dee, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dee, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dee, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dee count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dee, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dee, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dee, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dee count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dee, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dee, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dee, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dee count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dee, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dee, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dee, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dee count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dee, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dee, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dee, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dee count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dee, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dee, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dee, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dee count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dee, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dee, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dee, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dee count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dee, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dee, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dee, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dee count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dee, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dee, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dee, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dee count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dee, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dee, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dee, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dee count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dee, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dee, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dee, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dee count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dee, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dee, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dee, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dee count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dee, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dee, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dee, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dee count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dee, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dee, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dee, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dee count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dee, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dee, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dee, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dee count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dee, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dee, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dee, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dee count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1def, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1def, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1def, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1def count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1def, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1def, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1def, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1def count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1def, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1def, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1def, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1def count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1def, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1def, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1def, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1def count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1def, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1def, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1def, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1def count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1def, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1def, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1def, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1def count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1def, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1def, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1def, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1def count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1def, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1def, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1def, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1def count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1def, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1def, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1def, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1def count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1def, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1def, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1def, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1def count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1def, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1def, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1def, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1def count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1def, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1def, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1def, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1def count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1def, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1def, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1def, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1def count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1def, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1def, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1def, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1def count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1def, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1def, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1def, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1def count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1def, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1def, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1def, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1def count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(../sdk/lib/fslib/vfatlib/vfatlib.c:354) VfatPrint -- Starting verification pass.
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 5f, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 5f, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f747c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f747c020)
AtapiVirtToPhysAddr_: f747c020 -> 00000000:06151020
  get Phys(data[n=1+fe0]=f747d000)
AtapiVirtToPhysAddr_: f747d000 -> 00000000:06152000
  get Phys(data[n=1+1fe0]=f747e000)
AtapiVirtToPhysAddr_: f747e000 -> 00000000:0616b000
  get Phys(data[n=2+1000]=f747f000)
AtapiVirtToPhysAddr_: f747f000 -> 00000000:0616c000
  get Phys(data[n=2+2000]=f7480000)
AtapiVirtToPhysAddr_: f7480000 -> 00000000:0614d000
  get Phys(data[n=3+1000]=f7481000)
AtapiVirtToPhysAddr_: f7481000 -> 00000000:06166000
  get Phys(data[n=4+1000]=f7482000)
AtapiVirtToPhysAddr_: f7482000 -> 00000000:06157000
  get Phys(data[n=5+1000]=f7483000)
AtapiVirtToPhysAddr_: f7483000 -> 00000000:06160000
  get Phys(data[n=6+1000]=f7484000)
AtapiVirtToPhysAddr_: f7484000 -> 00000000:06159000
  get Phys(data[n=7+1000]=f7485000)
AtapiVirtToPhysAddr_: f7485000 -> 00000000:0615a000
  get Phys(data[n=7+2000]=f7486000)
AtapiVirtToPhysAddr_: f7486000 -> 00000000:06173000
  get Phys(data[n=8+1000]=f7487000)
AtapiVirtToPhysAddr_: f7487000 -> 00000000:06174000
  get Phys(data[n=8+2000]=f7488000)
AtapiVirtToPhysAddr_: f7488000 -> 00000000:06155000
  get Phys(data[n=9+1000]=f7489000)
AtapiVirtToPhysAddr_: f7489000 -> 00000000:0616e000
  get Phys(data[n=10+1000]=f748a000)
AtapiVirtToPhysAddr_: f748a000 -> 00000000:0615f000
  get Phys(data[n=11+1000]=f748b000)
AtapiVirtToPhysAddr_: f748b000 -> 00000000:06168000
  get Phys(data[n=12+1000]=f748c000)
AtapiVirtToPhysAddr_: f748c000 -> 00000000:06161000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x5f, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x5f count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector df, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is df, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f748c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f748c020)
AtapiVirtToPhysAddr_: f748c020 -> 00000000:06161020
  get Phys(data[n=1+fe0]=f748d000)
AtapiVirtToPhysAddr_: f748d000 -> 00000000:06162000
  get Phys(data[n=1+1fe0]=f748e000)
AtapiVirtToPhysAddr_: f748e000 -> 00000000:0617b000
  get Phys(data[n=2+1000]=f748f000)
AtapiVirtToPhysAddr_: f748f000 -> 00000000:0617c000
  get Phys(data[n=2+2000]=f7490000)
AtapiVirtToPhysAddr_: f7490000 -> 00000000:0615d000
  get Phys(data[n=3+1000]=f7491000)
AtapiVirtToPhysAddr_: f7491000 -> 00000000:06176000
  get Phys(data[n=4+1000]=f7492000)
AtapiVirtToPhysAddr_: f7492000 -> 00000000:06167000
  get Phys(data[n=5+1000]=f7493000)
AtapiVirtToPhysAddr_: f7493000 -> 00000000:06170000
  get Phys(data[n=6+1000]=f7494000)
AtapiVirtToPhysAddr_: f7494000 -> 00000000:06169000
  get Phys(data[n=7+1000]=f7495000)
AtapiVirtToPhysAddr_: f7495000 -> 00000000:0616a000
  get Phys(data[n=7+2000]=f7496000)
AtapiVirtToPhysAddr_: f7496000 -> 00000000:06183000
  get Phys(data[n=8+1000]=f7497000)
AtapiVirtToPhysAddr_: f7497000 -> 00000000:06184000
  get Phys(data[n=8+2000]=f7498000)
AtapiVirtToPhysAddr_: f7498000 -> 00000000:06165000
  get Phys(data[n=9+1000]=f7499000)
AtapiVirtToPhysAddr_: f7499000 -> 00000000:0617e000
  get Phys(data[n=10+1000]=f749a000)
AtapiVirtToPhysAddr_: f749a000 -> 00000000:0616f000
  get Phys(data[n=11+1000]=f749b000)
AtapiVirtToPhysAddr_: f749b000 -> 00000000:06178000
  get Phys(data[n=12+1000]=f749c000)
AtapiVirtToPhysAddr_: f749c000 -> 00000000:06171000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0xdf, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0xdf count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 15f, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 15f, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f749c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f749c020)
AtapiVirtToPhysAddr_: f749c020 -> 00000000:06171020
  get Phys(data[n=1+fe0]=f749d000)
AtapiVirtToPhysAddr_: f749d000 -> 00000000:06172000
  get Phys(data[n=1+1fe0]=f749e000)
AtapiVirtToPhysAddr_: f749e000 -> 00000000:0618b000
  get Phys(data[n=2+1000]=f749f000)
AtapiVirtToPhysAddr_: f749f000 -> 00000000:0618c000
  get Phys(data[n=2+2000]=f74a0000)
AtapiVirtToPhysAddr_: f74a0000 -> 00000000:0616d000
  get Phys(data[n=3+1000]=f74a1000)
AtapiVirtToPhysAddr_: f74a1000 -> 00000000:06186000
  get Phys(data[n=4+1000]=f74a2000)
AtapiVirtToPhysAddr_: f74a2000 -> 00000000:06177000
  get Phys(data[n=5+1000]=f74a3000)
AtapiVirtToPhysAddr_: f74a3000 -> 00000000:06180000
  get Phys(data[n=6+1000]=f74a4000)
AtapiVirtToPhysAddr_: f74a4000 -> 00000000:06179000
  get Phys(data[n=7+1000]=f74a5000)
AtapiVirtToPhysAddr_: f74a5000 -> 00000000:0617a000
  get Phys(data[n=7+2000]=f74a6000)
AtapiVirtToPhysAddr_: f74a6000 -> 00000000:06193000
  get Phys(data[n=8+1000]=f74a7000)
AtapiVirtToPhysAddr_: f74a7000 -> 00000000:06194000
  get Phys(data[n=8+2000]=f74a8000)
AtapiVirtToPhysAddr_: f74a8000 -> 00000000:06175000
  get Phys(data[n=9+1000]=f74a9000)
AtapiVirtToPhysAddr_: f74a9000 -> 00000000:0618e000
  get Phys(data[n=10+1000]=f74aa000)
AtapiVirtToPhysAddr_: f74aa000 -> 00000000:0617f000
  get Phys(data[n=11+1000]=f74ab000)
AtapiVirtToPhysAddr_: f74ab000 -> 00000000:06188000
  get Phys(data[n=12+1000]=f74ac000)
AtapiVirtToPhysAddr_: f74ac000 -> 00000000:06181000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x15f, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x15f count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 1df, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f74ac020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f74ac020)
AtapiVirtToPhysAddr_: f74ac020 -> 00000000:06181020
  get Phys(data[n=1+fe0]=f74ad000)
AtapiVirtToPhysAddr_: f74ad000 -> 00000000:06182000
  get Phys(data[n=1+1fe0]=f74ae000)
AtapiVirtToPhysAddr_: f74ae000 -> 00000000:0619b000
  get Phys(data[n=2+1000]=f74af000)
AtapiVirtToPhysAddr_: f74af000 -> 00000000:0619c000
  get Phys(data[n=2+2000]=f74b0000)
AtapiVirtToPhysAddr_: f74b0000 -> 00000000:0617d000
  get Phys(data[n=3+1000]=f74b1000)
AtapiVirtToPhysAddr_: f74b1000 -> 00000000:06196000
  get Phys(data[n=4+1000]=f74b2000)
AtapiVirtToPhysAddr_: f74b2000 -> 00000000:06187000
  get Phys(data[n=5+1000]=f74b3000)
AtapiVirtToPhysAddr_: f74b3000 -> 00000000:06190000
  get Phys(data[n=6+1000]=f74b4000)
AtapiVirtToPhysAddr_: f74b4000 -> 00000000:06189000
  get Phys(data[n=7+1000]=f74b5000)
AtapiVirtToPhysAddr_: f74b5000 -> 00000000:0618a000
  get Phys(data[n=7+2000]=f74b6000)
AtapiVirtToPhysAddr_: f74b6000 -> 00000000:061a3000
  get Phys(data[n=8+1000]=f74b7000)
AtapiVirtToPhysAddr_: f74b7000 -> 00000000:061a4000
  get Phys(data[n=8+2000]=f74b8000)
AtapiVirtToPhysAddr_: f74b8000 -> 00000000:06185000
  get Phys(data[n=9+1000]=f74b9000)
AtapiVirtToPhysAddr_: f74b9000 -> 00000000:0619e000
  get Phys(data[n=10+1000]=f74ba000)
AtapiVirtToPhysAddr_: f74ba000 -> 00000000:0618f000
  get Phys(data[n=11+1000]=f74bb000)
AtapiVirtToPhysAddr_: f74bb000 -> 00000000:06198000
  get Phys(data[n=12+1000]=f74bc000)
AtapiVirtToPhysAddr_: f74bc000 -> 00000000:06191000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 25f, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 25f, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f74bc020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f74bc020)
AtapiVirtToPhysAddr_: f74bc020 -> 00000000:06191020
  get Phys(data[n=1+fe0]=f74bd000)
AtapiVirtToPhysAddr_: f74bd000 -> 00000000:06192000
  get Phys(data[n=1+1fe0]=f74be000)
AtapiVirtToPhysAddr_: f74be000 -> 00000000:061ab000
  get Phys(data[n=2+1000]=f74bf000)
AtapiVirtToPhysAddr_: f74bf000 -> 00000000:061ac000
  get Phys(data[n=2+2000]=f74c0000)
AtapiVirtToPhysAddr_: f74c0000 -> 00000000:0618d000
  get Phys(data[n=3+1000]=f74c1000)
AtapiVirtToPhysAddr_: f74c1000 -> 00000000:061a6000
  get Phys(data[n=4+1000]=f74c2000)
AtapiVirtToPhysAddr_: f74c2000 -> 00000000:06197000
  get Phys(data[n=5+1000]=f74c3000)
AtapiVirtToPhysAddr_: f74c3000 -> 00000000:061a0000
  get Phys(data[n=6+1000]=f74c4000)
AtapiVirtToPhysAddr_: f74c4000 -> 00000000:06199000
  get Phys(data[n=7+1000]=f74c5000)
AtapiVirtToPhysAddr_: f74c5000 -> 00000000:0619a000
  get Phys(data[n=7+2000]=f74c6000)
AtapiVirtToPhysAddr_: f74c6000 -> 00000000:061b3000
  get Phys(data[n=8+1000]=f74c7000)
AtapiVirtToPhysAddr_: f74c7000 -> 00000000:061b4000
  get Phys(data[n=8+2000]=f74c8000)
AtapiVirtToPhysAddr_: f74c8000 -> 00000000:06195000
  get Phys(data[n=9+1000]=f74c9000)
AtapiVirtToPhysAddr_: f74c9000 -> 00000000:061ae000
  get Phys(data[n=10+1000]=f74ca000)
AtapiVirtToPhysAddr_: f74ca000 -> 00000000:0619f000
  get Phys(data[n=11+1000]=f74cb000)
AtapiVirtToPhysAddr_: f74cb000 -> 00000000:061a8000
  get Phys(data[n=12+1000]=f74cc000)
AtapiVirtToPhysAddr_: f74cc000 -> 00000000:061a1000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x25f, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x25f count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 2df, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 2df, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f74cc020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f74cc020)
AtapiVirtToPhysAddr_: f74cc020 -> 00000000:061a1020
  get Phys(data[n=1+fe0]=f74cd000)
AtapiVirtToPhysAddr_: f74cd000 -> 00000000:061a2000
  get Phys(data[n=1+1fe0]=f74ce000)
AtapiVirtToPhysAddr_: f74ce000 -> 00000000:061bb000
  get Phys(data[n=2+1000]=f74cf000)
AtapiVirtToPhysAddr_: f74cf000 -> 00000000:061bc000
  get Phys(data[n=2+2000]=f74d0000)
AtapiVirtToPhysAddr_: f74d0000 -> 00000000:0619d000
  get Phys(data[n=3+1000]=f74d1000)
AtapiVirtToPhysAddr_: f74d1000 -> 00000000:061b6000
  get Phys(data[n=4+1000]=f74d2000)
AtapiVirtToPhysAddr_: f74d2000 -> 00000000:061a7000
  get Phys(data[n=5+1000]=f74d3000)
AtapiVirtToPhysAddr_: f74d3000 -> 00000000:061b0000
  get Phys(data[n=6+1000]=f74d4000)
AtapiVirtToPhysAddr_: f74d4000 -> 00000000:061a9000
  get Phys(data[n=7+1000]=f74d5000)
AtapiVirtToPhysAddr_: f74d5000 -> 00000000:061aa000
  get Phys(data[n=7+2000]=f74d6000)
AtapiVirtToPhysAddr_: f74d6000 -> 00000000:061c3000
  get Phys(data[n=8+1000]=f74d7000)
AtapiVirtToPhysAddr_: f74d7000 -> 00000000:061c4000
  get Phys(data[n=8+2000]=f74d8000)
AtapiVirtToPhysAddr_: f74d8000 -> 00000000:061a5000
  get Phys(data[n=9+1000]=f74d9000)
AtapiVirtToPhysAddr_: f74d9000 -> 00000000:061be000
  get Phys(data[n=10+1000]=f74da000)
AtapiVirtToPhysAddr_: f74da000 -> 00000000:061af000
  get Phys(data[n=11+1000]=f74db000)
AtapiVirtToPhysAddr_: f74db000 -> 00000000:061b8000
  get Phys(data[n=12+1000]=f74dc000)
AtapiVirtToPhysAddr_: f74dc000 -> 00000000:061b1000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x2df, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x2df count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 35f, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 35f, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f74dc020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f74dc020)
AtapiVirtToPhysAddr_: f74dc020 -> 00000000:061b1020
  get Phys(data[n=1+fe0]=f74dd000)
AtapiVirtToPhysAddr_: f74dd000 -> 00000000:061b2000
  get Phys(data[n=1+1fe0]=f74de000)
AtapiVirtToPhysAddr_: f74de000 -> 00000000:061cb000
  get Phys(data[n=2+1000]=f74df000)
AtapiVirtToPhysAddr_: f74df000 -> 00000000:061cc000
  get Phys(data[n=2+2000]=f74e0000)
AtapiVirtToPhysAddr_: f74e0000 -> 00000000:061ad000
  get Phys(data[n=3+1000]=f74e1000)
AtapiVirtToPhysAddr_: f74e1000 -> 00000000:061c6000
  get Phys(data[n=4+1000]=f74e2000)
AtapiVirtToPhysAddr_: f74e2000 -> 00000000:061b7000
  get Phys(data[n=5+1000]=f74e3000)
AtapiVirtToPhysAddr_: f74e3000 -> 00000000:061c0000
  get Phys(data[n=6+1000]=f74e4000)
AtapiVirtToPhysAddr_: f74e4000 -> 00000000:061b9000
  get Phys(data[n=7+1000]=f74e5000)
AtapiVirtToPhysAddr_: f74e5000 -> 00000000:061ba000
  get Phys(data[n=7+2000]=f74e6000)
AtapiVirtToPhysAddr_: f74e6000 -> 00000000:061d3000
  get Phys(data[n=8+1000]=f74e7000)
AtapiVirtToPhysAddr_: f74e7000 -> 00000000:061d4000
  get Phys(data[n=8+2000]=f74e8000)
AtapiVirtToPhysAddr_: f74e8000 -> 00000000:061b5000
  get Phys(data[n=9+1000]=f74e9000)
AtapiVirtToPhysAddr_: f74e9000 -> 00000000:061ce000
  get Phys(data[n=10+1000]=f74ea000)
AtapiVirtToPhysAddr_: f74ea000 -> 00000000:061bf000
  get Phys(data[n=11+1000]=f74eb000)
AtapiVirtToPhysAddr_: f74eb000 -> 00000000:061c8000
  get Phys(data[n=12+1000]=f74ec000)
AtapiVirtToPhysAddr_: f74ec000 -> 00000000:061c1000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x35f, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x35f count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3df, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3df, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f74ec020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f74ec020)
AtapiVirtToPhysAddr_: f74ec020 -> 00000000:061c1020
  get Phys(data[n=1+fe0]=f74ed000)
AtapiVirtToPhysAddr_: f74ed000 -> 00000000:061c2000
  get Phys(data[n=1+1fe0]=f74ee000)
AtapiVirtToPhysAddr_: f74ee000 -> 00000000:061db000
  get Phys(data[n=2+1000]=f74ef000)
AtapiVirtToPhysAddr_: f74ef000 -> 00000000:061dc000
  get Phys(data[n=2+2000]=f74f0000)
AtapiVirtToPhysAddr_: f74f0000 -> 00000000:061bd000
  get Phys(data[n=3+1000]=f74f1000)
AtapiVirtToPhysAddr_: f74f1000 -> 00000000:061d6000
  get Phys(data[n=4+1000]=f74f2000)
AtapiVirtToPhysAddr_: f74f2000 -> 00000000:061c7000
  get Phys(data[n=5+1000]=f74f3000)
AtapiVirtToPhysAddr_: f74f3000 -> 00000000:061d0000
  get Phys(data[n=6+1000]=f74f4000)
AtapiVirtToPhysAddr_: f74f4000 -> 00000000:061c9000
  get Phys(data[n=7+1000]=f74f5000)
AtapiVirtToPhysAddr_: f74f5000 -> 00000000:061ca000
  get Phys(data[n=7+2000]=f74f6000)
AtapiVirtToPhysAddr_: f74f6000 -> 00000000:061e3000
  get Phys(data[n=8+1000]=f74f7000)
AtapiVirtToPhysAddr_: f74f7000 -> 00000000:061e4000
  get Phys(data[n=8+2000]=f74f8000)
AtapiVirtToPhysAddr_: f74f8000 -> 00000000:061c5000
  get Phys(data[n=9+1000]=f74f9000)
AtapiVirtToPhysAddr_: f74f9000 -> 00000000:061de000
  get Phys(data[n=10+1000]=f74fa000)
AtapiVirtToPhysAddr_: f74fa000 -> 00000000:061cf000
  get Phys(data[n=11+1000]=f74fb000)
AtapiVirtToPhysAddr_: f74fb000 -> 00000000:061d8000
  get Phys(data[n=12+1000]=f74fc000)
AtapiVirtToPhysAddr_: f74fc000 -> 00000000:061d1000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x3df, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x3df count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 45f, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 45f, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f74fc020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f74fc020)
AtapiVirtToPhysAddr_: f74fc020 -> 00000000:061d1020
  get Phys(data[n=1+fe0]=f74fd000)
AtapiVirtToPhysAddr_: f74fd000 -> 00000000:061d2000
  get Phys(data[n=1+1fe0]=f74fe000)
AtapiVirtToPhysAddr_: f74fe000 -> 00000000:061eb000
  get Phys(data[n=2+1000]=f74ff000)
AtapiVirtToPhysAddr_: f74ff000 -> 00000000:061ec000
  get Phys(data[n=2+2000]=f7500000)
AtapiVirtToPhysAddr_: f7500000 -> 00000000:061cd000
  get Phys(data[n=3+1000]=f7501000)
AtapiVirtToPhysAddr_: f7501000 -> 00000000:061e6000
  get Phys(data[n=4+1000]=f7502000)
AtapiVirtToPhysAddr_: f7502000 -> 00000000:061d7000
  get Phys(data[n=5+1000]=f7503000)
AtapiVirtToPhysAddr_: f7503000 -> 00000000:061e0000
  get Phys(data[n=6+1000]=f7504000)
AtapiVirtToPhysAddr_: f7504000 -> 00000000:061d9000
  get Phys(data[n=7+1000]=f7505000)
AtapiVirtToPhysAddr_: f7505000 -> 00000000:061da000
  get Phys(data[n=7+2000]=f7506000)
AtapiVirtToPhysAddr_: f7506000 -> 00000000:061f3000
  get Phys(data[n=8+1000]=f7507000)
AtapiVirtToPhysAddr_: f7507000 -> 00000000:061f4000
  get Phys(data[n=8+2000]=f7508000)
AtapiVirtToPhysAddr_: f7508000 -> 00000000:061d5000
  get Phys(data[n=9+1000]=f7509000)
AtapiVirtToPhysAddr_: f7509000 -> 00000000:061ee000
  get Phys(data[n=10+1000]=f750a000)
AtapiVirtToPhysAddr_: f750a000 -> 00000000:061df000
  get Phys(data[n=11+1000]=f750b000)
AtapiVirtToPhysAddr_: f750b000 -> 00000000:061e8000
  get Phys(data[n=12+1000]=f750c000)
AtapiVirtToPhysAddr_: f750c000 -> 00000000:061e1000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x45f, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x45f count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 4df, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 4df, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f750c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f750c020)
AtapiVirtToPhysAddr_: f750c020 -> 00000000:061e1020
  get Phys(data[n=1+fe0]=f750d000)
AtapiVirtToPhysAddr_: f750d000 -> 00000000:061e2000
  get Phys(data[n=1+1fe0]=f750e000)
AtapiVirtToPhysAddr_: f750e000 -> 00000000:061fb000
  get Phys(data[n=2+1000]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:061fc000
  get Phys(data[n=2+2000]=f7510000)
AtapiVirtToPhysAddr_: f7510000 -> 00000000:061dd000
  get Phys(data[n=3+1000]=f7511000)
AtapiVirtToPhysAddr_: f7511000 -> 00000000:061f6000
  get Phys(data[n=4+1000]=f7512000)
AtapiVirtToPhysAddr_: f7512000 -> 00000000:061e7000
  get Phys(data[n=5+1000]=f7513000)
AtapiVirtToPhysAddr_: f7513000 -> 00000000:061f0000
  get Phys(data[n=6+1000]=f7514000)
AtapiVirtToPhysAddr_: f7514000 -> 00000000:061e9000
  get Phys(data[n=7+1000]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:061ea000
  get Phys(data[n=7+2000]=f7516000)
AtapiVirtToPhysAddr_: f7516000 -> 00000000:06203000
  get Phys(data[n=8+1000]=f7517000)
AtapiVirtToPhysAddr_: f7517000 -> 00000000:06204000
  get Phys(data[n=8+2000]=f7518000)
AtapiVirtToPhysAddr_: f7518000 -> 00000000:061e5000
  get Phys(data[n=9+1000]=f7519000)
AtapiVirtToPhysAddr_: f7519000 -> 00000000:061fe000
  get Phys(data[n=10+1000]=f751a000)
AtapiVirtToPhysAddr_: f751a000 -> 00000000:061ef000
  get Phys(data[n=11+1000]=f751b000)
AtapiVirtToPhysAddr_: f751b000 -> 00000000:061f8000
  get Phys(data[n=12+1000]=f751c000)
AtapiVirtToPhysAddr_: f751c000 -> 00000000:061f1000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x4df, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x4df count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 55f, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 55f, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f751c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f751c020)
AtapiVirtToPhysAddr_: f751c020 -> 00000000:061f1020
  get Phys(data[n=1+fe0]=f751d000)
AtapiVirtToPhysAddr_: f751d000 -> 00000000:061f2000
  get Phys(data[n=1+1fe0]=f751e000)
AtapiVirtToPhysAddr_: f751e000 -> 00000000:0620b000
  get Phys(data[n=2+1000]=f751f000)
AtapiVirtToPhysAddr_: f751f000 -> 00000000:0620c000
  get Phys(data[n=2+2000]=f7520000)
AtapiVirtToPhysAddr_: f7520000 -> 00000000:061ed000
  get Phys(data[n=3+1000]=f7521000)
AtapiVirtToPhysAddr_: f7521000 -> 00000000:06206000
  get Phys(data[n=4+1000]=f7522000)
AtapiVirtToPhysAddr_: f7522000 -> 00000000:061f7000
  get Phys(data[n=5+1000]=f7523000)
AtapiVirtToPhysAddr_: f7523000 -> 00000000:06200000
  get Phys(data[n=6+1000]=f7524000)
AtapiVirtToPhysAddr_: f7524000 -> 00000000:061f9000
  get Phys(data[n=7+1000]=f7525000)
AtapiVirtToPhysAddr_: f7525000 -> 00000000:061fa000
  get Phys(data[n=7+2000]=f7526000)
AtapiVirtToPhysAddr_: f7526000 -> 00000000:06213000
  get Phys(data[n=8+1000]=f7527000)
AtapiVirtToPhysAddr_: f7527000 -> 00000000:06214000
  get Phys(data[n=8+2000]=f7528000)
AtapiVirtToPhysAddr_: f7528000 -> 00000000:061f5000
  get Phys(data[n=9+1000]=f7529000)
AtapiVirtToPhysAddr_: f7529000 -> 00000000:0620e000
  get Phys(data[n=10+1000]=f752a000)
AtapiVirtToPhysAddr_: f752a000 -> 00000000:061ff000
  get Phys(data[n=11+1000]=f752b000)
AtapiVirtToPhysAddr_: f752b000 -> 00000000:06208000
  get Phys(data[n=12+1000]=f752c000)
AtapiVirtToPhysAddr_: f752c000 -> 00000000:06201000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x55f, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x55f count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 5df, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 5df, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f752c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f752c020)
AtapiVirtToPhysAddr_: f752c020 -> 00000000:06201020
  get Phys(data[n=1+fe0]=f752d000)
AtapiVirtToPhysAddr_: f752d000 -> 00000000:06202000
  get Phys(data[n=1+1fe0]=f752e000)
AtapiVirtToPhysAddr_: f752e000 -> 00000000:0621b000
  get Phys(data[n=2+1000]=f752f000)
AtapiVirtToPhysAddr_: f752f000 -> 00000000:0621c000
  get Phys(data[n=2+2000]=f7530000)
AtapiVirtToPhysAddr_: f7530000 -> 00000000:061fd000
  get Phys(data[n=3+1000]=f7531000)
AtapiVirtToPhysAddr_: f7531000 -> 00000000:06216000
  get Phys(data[n=4+1000]=f7532000)
AtapiVirtToPhysAddr_: f7532000 -> 00000000:06207000
  get Phys(data[n=5+1000]=f7533000)
AtapiVirtToPhysAddr_: f7533000 -> 00000000:06210000
  get Phys(data[n=6+1000]=f7534000)
AtapiVirtToPhysAddr_: f7534000 -> 00000000:06209000
  get Phys(data[n=7+1000]=f7535000)
AtapiVirtToPhysAddr_: f7535000 -> 00000000:0620a000
  get Phys(data[n=7+2000]=f7536000)
AtapiVirtToPhysAddr_: f7536000 -> 00000000:06223000
  get Phys(data[n=8+1000]=f7537000)
AtapiVirtToPhysAddr_: f7537000 -> 00000000:06224000
  get Phys(data[n=8+2000]=f7538000)
AtapiVirtToPhysAddr_: f7538000 -> 00000000:06205000
  get Phys(data[n=9+1000]=f7539000)
AtapiVirtToPhysAddr_: f7539000 -> 00000000:0621e000
  get Phys(data[n=10+1000]=f753a000)
AtapiVirtToPhysAddr_: f753a000 -> 00000000:0620f000
  get Phys(data[n=11+1000]=f753b000)
AtapiVirtToPhysAddr_: f753b000 -> 00000000:06218000
  get Phys(data[n=12+1000]=f753c000)
AtapiVirtToPhysAddr_: f753c000 -> 00000000:06211000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x5df, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x5df count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 65f, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 65f, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f753c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f753c020)
AtapiVirtToPhysAddr_: f753c020 -> 00000000:06211020
  get Phys(data[n=1+fe0]=f753d000)
AtapiVirtToPhysAddr_: f753d000 -> 00000000:06212000
  get Phys(data[n=1+1fe0]=f753e000)
AtapiVirtToPhysAddr_: f753e000 -> 00000000:0622b000
  get Phys(data[n=2+1000]=f753f000)
AtapiVirtToPhysAddr_: f753f000 -> 00000000:0622c000
  get Phys(data[n=2+2000]=f7540000)
AtapiVirtToPhysAddr_: f7540000 -> 00000000:0620d000
  get Phys(data[n=3+1000]=f7541000)
AtapiVirtToPhysAddr_: f7541000 -> 00000000:06226000
  get Phys(data[n=4+1000]=f7542000)
AtapiVirtToPhysAddr_: f7542000 -> 00000000:06217000
  get Phys(data[n=5+1000]=f7543000)
AtapiVirtToPhysAddr_: f7543000 -> 00000000:06220000
  get Phys(data[n=6+1000]=f7544000)
AtapiVirtToPhysAddr_: f7544000 -> 00000000:06219000
  get Phys(data[n=7+1000]=f7545000)
AtapiVirtToPhysAddr_: f7545000 -> 00000000:0621a000
  get Phys(data[n=7+2000]=f7546000)
AtapiVirtToPhysAddr_: f7546000 -> 00000000:06233000
  get Phys(data[n=8+1000]=f7547000)
AtapiVirtToPhysAddr_: f7547000 -> 00000000:06234000
  get Phys(data[n=8+2000]=f7548000)
AtapiVirtToPhysAddr_: f7548000 -> 00000000:06215000
  get Phys(data[n=9+1000]=f7549000)
AtapiVirtToPhysAddr_: f7549000 -> 00000000:0622e000
  get Phys(data[n=10+1000]=f754a000)
AtapiVirtToPhysAddr_: f754a000 -> 00000000:0621f000
  get Phys(data[n=11+1000]=f754b000)
AtapiVirtToPhysAddr_: f754b000 -> 00000000:06228000
  get Phys(data[n=12+1000]=f754c000)
AtapiVirtToPhysAddr_: f754c000 -> 00000000:06221000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x65f, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x65f count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 6df, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 6df, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f754c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f754c020)
AtapiVirtToPhysAddr_: f754c020 -> 00000000:06221020
  get Phys(data[n=1+fe0]=f754d000)
AtapiVirtToPhysAddr_: f754d000 -> 00000000:06222000
  get Phys(data[n=1+1fe0]=f754e000)
AtapiVirtToPhysAddr_: f754e000 -> 00000000:0623b000
  get Phys(data[n=2+1000]=f754f000)
AtapiVirtToPhysAddr_: f754f000 -> 00000000:0623c000
  get Phys(data[n=2+2000]=f7550000)
AtapiVirtToPhysAddr_: f7550000 -> 00000000:0621d000
  get Phys(data[n=3+1000]=f7551000)
AtapiVirtToPhysAddr_: f7551000 -> 00000000:06236000
  get Phys(data[n=4+1000]=f7552000)
AtapiVirtToPhysAddr_: f7552000 -> 00000000:06227000
  get Phys(data[n=5+1000]=f7553000)
AtapiVirtToPhysAddr_: f7553000 -> 00000000:06230000
  get Phys(data[n=6+1000]=f7554000)
AtapiVirtToPhysAddr_: f7554000 -> 00000000:06229000
  get Phys(data[n=7+1000]=f7555000)
AtapiVirtToPhysAddr_: f7555000 -> 00000000:0622a000
  get Phys(data[n=7+2000]=f7556000)
AtapiVirtToPhysAddr_: f7556000 -> 00000000:06243000
  get Phys(data[n=8+1000]=f7557000)
AtapiVirtToPhysAddr_: f7557000 -> 00000000:06244000
  get Phys(data[n=8+2000]=f7558000)
AtapiVirtToPhysAddr_: f7558000 -> 00000000:06225000
  get Phys(data[n=9+1000]=f7559000)
AtapiVirtToPhysAddr_: f7559000 -> 00000000:0623e000
  get Phys(data[n=10+1000]=f755a000)
AtapiVirtToPhysAddr_: f755a000 -> 00000000:0622f000
  get Phys(data[n=11+1000]=f755b000)
AtapiVirtToPhysAddr_: f755b000 -> 00000000:06238000
  get Phys(data[n=12+1000]=f755c000)
AtapiVirtToPhysAddr_: f755c000 -> 00000000:06231000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x6df, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x6df count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 75f, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 75f, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f755c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f755c020)
AtapiVirtToPhysAddr_: f755c020 -> 00000000:06231020
  get Phys(data[n=1+fe0]=f755d000)
AtapiVirtToPhysAddr_: f755d000 -> 00000000:06232000
  get Phys(data[n=1+1fe0]=f755e000)
AtapiVirtToPhysAddr_: f755e000 -> 00000000:0624b000
  get Phys(data[n=2+1000]=f755f000)
AtapiVirtToPhysAddr_: f755f000 -> 00000000:0624c000
  get Phys(data[n=2+2000]=f7560000)
AtapiVirtToPhysAddr_: f7560000 -> 00000000:0622d000
  get Phys(data[n=3+1000]=f7561000)
AtapiVirtToPhysAddr_: f7561000 -> 00000000:06246000
  get Phys(data[n=4+1000]=f7562000)
AtapiVirtToPhysAddr_: f7562000 -> 00000000:06237000
  get Phys(data[n=5+1000]=f7563000)
AtapiVirtToPhysAddr_: f7563000 -> 00000000:06240000
  get Phys(data[n=6+1000]=f7564000)
AtapiVirtToPhysAddr_: f7564000 -> 00000000:06239000
  get Phys(data[n=7+1000]=f7565000)
AtapiVirtToPhysAddr_: f7565000 -> 00000000:0623a000
  get Phys(data[n=7+2000]=f7566000)
AtapiVirtToPhysAddr_: f7566000 -> 00000000:06253000
  get Phys(data[n=8+1000]=f7567000)
AtapiVirtToPhysAddr_: f7567000 -> 00000000:06254000
  get Phys(data[n=8+2000]=f7568000)
AtapiVirtToPhysAddr_: f7568000 -> 00000000:06235000
  get Phys(data[n=9+1000]=f7569000)
AtapiVirtToPhysAddr_: f7569000 -> 00000000:0624e000
  get Phys(data[n=10+1000]=f756a000)
AtapiVirtToPhysAddr_: f756a000 -> 00000000:0623f000
  get Phys(data[n=11+1000]=f756b000)
AtapiVirtToPhysAddr_: f756b000 -> 00000000:06248000
  get Phys(data[n=12+1000]=f756c000)
AtapiVirtToPhysAddr_: f756c000 -> 00000000:06241000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x75f, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x75f count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7df, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 7df, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f756c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f756c020)
AtapiVirtToPhysAddr_: f756c020 -> 00000000:06241020
  get Phys(data[n=1+fe0]=f756d000)
AtapiVirtToPhysAddr_: f756d000 -> 00000000:06242000
  get Phys(data[n=1+1fe0]=f756e000)
AtapiVirtToPhysAddr_: f756e000 -> 00000000:0625b000
  get Phys(data[n=2+1000]=f756f000)
AtapiVirtToPhysAddr_: f756f000 -> 00000000:0625c000
  get Phys(data[n=2+2000]=f7570000)
AtapiVirtToPhysAddr_: f7570000 -> 00000000:0623d000
  get Phys(data[n=3+1000]=f7571000)
AtapiVirtToPhysAddr_: f7571000 -> 00000000:06256000
  get Phys(data[n=4+1000]=f7572000)
AtapiVirtToPhysAddr_: f7572000 -> 00000000:06247000
  get Phys(data[n=5+1000]=f7573000)
AtapiVirtToPhysAddr_: f7573000 -> 00000000:06250000
  get Phys(data[n=6+1000]=f7574000)
AtapiVirtToPhysAddr_: f7574000 -> 00000000:06249000
  get Phys(data[n=7+1000]=f7575000)
AtapiVirtToPhysAddr_: f7575000 -> 00000000:0624a000
  get Phys(data[n=7+2000]=f7576000)
AtapiVirtToPhysAddr_: f7576000 -> 00000000:06263000
  get Phys(data[n=8+1000]=f7577000)
AtapiVirtToPhysAddr_: f7577000 -> 00000000:06264000
  get Phys(data[n=8+2000]=f7578000)
AtapiVirtToPhysAddr_: f7578000 -> 00000000:06245000
  get Phys(data[n=9+1000]=f7579000)
AtapiVirtToPhysAddr_: f7579000 -> 00000000:0625e000
  get Phys(data[n=10+1000]=f757a000)
AtapiVirtToPhysAddr_: f757a000 -> 00000000:0624f000
  get Phys(data[n=11+1000]=f757b000)
AtapiVirtToPhysAddr_: f757b000 -> 00000000:06258000
  get Phys(data[n=12+1000]=f757c000)
AtapiVirtToPhysAddr_: f757c000 -> 00000000:06251000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x7df, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x7df count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 85f, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 85f, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f757c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f757c020)
AtapiVirtToPhysAddr_: f757c020 -> 00000000:06251020
  get Phys(data[n=1+fe0]=f757d000)
AtapiVirtToPhysAddr_: f757d000 -> 00000000:06252000
  get Phys(data[n=1+1fe0]=f757e000)
AtapiVirtToPhysAddr_: f757e000 -> 00000000:0626b000
  get Phys(data[n=2+1000]=f757f000)
AtapiVirtToPhysAddr_: f757f000 -> 00000000:0626c000
  get Phys(data[n=2+2000]=f7580000)
AtapiVirtToPhysAddr_: f7580000 -> 00000000:0624d000
  get Phys(data[n=3+1000]=f7581000)
AtapiVirtToPhysAddr_: f7581000 -> 00000000:06266000
  get Phys(data[n=4+1000]=f7582000)
AtapiVirtToPhysAddr_: f7582000 -> 00000000:06257000
  get Phys(data[n=5+1000]=f7583000)
AtapiVirtToPhysAddr_: f7583000 -> 00000000:06260000
  get Phys(data[n=6+1000]=f7584000)
AtapiVirtToPhysAddr_: f7584000 -> 00000000:06259000
  get Phys(data[n=7+1000]=f7585000)
AtapiVirtToPhysAddr_: f7585000 -> 00000000:0625a000
  get Phys(data[n=7+2000]=f7586000)
AtapiVirtToPhysAddr_: f7586000 -> 00000000:06273000
  get Phys(data[n=8+1000]=f7587000)
AtapiVirtToPhysAddr_: f7587000 -> 00000000:06274000
  get Phys(data[n=8+2000]=f7588000)
AtapiVirtToPhysAddr_: f7588000 -> 00000000:06255000
  get Phys(data[n=9+1000]=f7589000)
AtapiVirtToPhysAddr_: f7589000 -> 00000000:0626e000
  get Phys(data[n=10+1000]=f758a000)
AtapiVirtToPhysAddr_: f758a000 -> 00000000:0625f000
  get Phys(data[n=11+1000]=f758b000)
AtapiVirtToPhysAddr_: f758b000 -> 00000000:06268000
  get Phys(data[n=12+1000]=f758c000)
AtapiVirtToPhysAddr_: f758c000 -> 00000000:06261000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x85f, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x85f count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 8df, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 8df, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f758c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f758c020)
AtapiVirtToPhysAddr_: f758c020 -> 00000000:06261020
  get Phys(data[n=1+fe0]=f758d000)
AtapiVirtToPhysAddr_: f758d000 -> 00000000:06262000
  get Phys(data[n=1+1fe0]=f758e000)
AtapiVirtToPhysAddr_: f758e000 -> 00000000:0627b000
  get Phys(data[n=2+1000]=f758f000)
AtapiVirtToPhysAddr_: f758f000 -> 00000000:0627c000
  get Phys(data[n=2+2000]=f7590000)
AtapiVirtToPhysAddr_: f7590000 -> 00000000:0625d000
  get Phys(data[n=3+1000]=f7591000)
AtapiVirtToPhysAddr_: f7591000 -> 00000000:06276000
  get Phys(data[n=4+1000]=f7592000)
AtapiVirtToPhysAddr_: f7592000 -> 00000000:06267000
  get Phys(data[n=5+1000]=f7593000)
AtapiVirtToPhysAddr_: f7593000 -> 00000000:06270000
  get Phys(data[n=6+1000]=f7594000)
AtapiVirtToPhysAddr_: f7594000 -> 00000000:06269000
  get Phys(data[n=7+1000]=f7595000)
AtapiVirtToPhysAddr_: f7595000 -> 00000000:0626a000
  get Phys(data[n=7+2000]=f7596000)
AtapiVirtToPhysAddr_: f7596000 -> 00000000:06283000
  get Phys(data[n=8+1000]=f7597000)
AtapiVirtToPhysAddr_: f7597000 -> 00000000:06284000
  get Phys(data[n=8+2000]=f7598000)
AtapiVirtToPhysAddr_: f7598000 -> 00000000:06265000
  get Phys(data[n=9+1000]=f7599000)
AtapiVirtToPhysAddr_: f7599000 -> 00000000:0627e000
  get Phys(data[n=10+1000]=f759a000)
AtapiVirtToPhysAddr_: f759a000 -> 00000000:0626f000
  get Phys(data[n=11+1000]=f759b000)
AtapiVirtToPhysAddr_: f759b000 -> 00000000:06278000
  get Phys(data[n=12+1000]=f759c000)
AtapiVirtToPhysAddr_: f759c000 -> 00000000:06271000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x8df, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x8df count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 95f, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 95f, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f759c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f759c020)
AtapiVirtToPhysAddr_: f759c020 -> 00000000:06271020
  get Phys(data[n=1+fe0]=f759d000)
AtapiVirtToPhysAddr_: f759d000 -> 00000000:06272000
  get Phys(data[n=1+1fe0]=f759e000)
AtapiVirtToPhysAddr_: f759e000 -> 00000000:0628b000
  get Phys(data[n=2+1000]=f759f000)
AtapiVirtToPhysAddr_: f759f000 -> 00000000:0628c000
  get Phys(data[n=2+2000]=f75a0000)
AtapiVirtToPhysAddr_: f75a0000 -> 00000000:0626d000
  get Phys(data[n=3+1000]=f75a1000)
AtapiVirtToPhysAddr_: f75a1000 -> 00000000:06286000
  get Phys(data[n=4+1000]=f75a2000)
AtapiVirtToPhysAddr_: f75a2000 -> 00000000:06277000
  get Phys(data[n=5+1000]=f75a3000)
AtapiVirtToPhysAddr_: f75a3000 -> 00000000:06280000
  get Phys(data[n=6+1000]=f75a4000)
AtapiVirtToPhysAddr_: f75a4000 -> 00000000:06279000
  get Phys(data[n=7+1000]=f75a5000)
AtapiVirtToPhysAddr_: f75a5000 -> 00000000:0627a000
  get Phys(data[n=7+2000]=f75a6000)
AtapiVirtToPhysAddr_: f75a6000 -> 00000000:06293000
  get Phys(data[n=8+1000]=f75a7000)
AtapiVirtToPhysAddr_: f75a7000 -> 00000000:06294000
  get Phys(data[n=8+2000]=f75a8000)
AtapiVirtToPhysAddr_: f75a8000 -> 00000000:06275000
  get Phys(data[n=9+1000]=f75a9000)
AtapiVirtToPhysAddr_: f75a9000 -> 00000000:0628e000
  get Phys(data[n=10+1000]=f75aa000)
AtapiVirtToPhysAddr_: f75aa000 -> 00000000:0627f000
  get Phys(data[n=11+1000]=f75ab000)
AtapiVirtToPhysAddr_: f75ab000 -> 00000000:06288000
  get Phys(data[n=12+1000]=f75ac000)
AtapiVirtToPhysAddr_: f75ac000 -> 00000000:06281000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x95f, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x95f count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 9df, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 9df, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f75ac020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f75ac020)
AtapiVirtToPhysAddr_: f75ac020 -> 00000000:06281020
  get Phys(data[n=1+fe0]=f75ad000)
AtapiVirtToPhysAddr_: f75ad000 -> 00000000:06282000
  get Phys(data[n=1+1fe0]=f75ae000)
AtapiVirtToPhysAddr_: f75ae000 -> 00000000:0629b000
  get Phys(data[n=2+1000]=f75af000)
AtapiVirtToPhysAddr_: f75af000 -> 00000000:0629c000
  get Phys(data[n=2+2000]=f75b0000)
AtapiVirtToPhysAddr_: f75b0000 -> 00000000:0627d000
  get Phys(data[n=3+1000]=f75b1000)
AtapiVirtToPhysAddr_: f75b1000 -> 00000000:06296000
  get Phys(data[n=4+1000]=f75b2000)
AtapiVirtToPhysAddr_: f75b2000 -> 00000000:06287000
  get Phys(data[n=5+1000]=f75b3000)
AtapiVirtToPhysAddr_: f75b3000 -> 00000000:06290000
  get Phys(data[n=6+1000]=f75b4000)
AtapiVirtToPhysAddr_: f75b4000 -> 00000000:06289000
  get Phys(data[n=7+1000]=f75b5000)
AtapiVirtToPhysAddr_: f75b5000 -> 00000000:0628a000
  get Phys(data[n=7+2000]=f75b6000)
AtapiVirtToPhysAddr_: f75b6000 -> 00000000:062a3000
  get Phys(data[n=8+1000]=f75b7000)
AtapiVirtToPhysAddr_: f75b7000 -> 00000000:062a4000
  get Phys(data[n=8+2000]=f75b8000)
AtapiVirtToPhysAddr_: f75b8000 -> 00000000:06285000
  get Phys(data[n=9+1000]=f75b9000)
AtapiVirtToPhysAddr_: f75b9000 -> 00000000:0629e000
  get Phys(data[n=10+1000]=f75ba000)
AtapiVirtToPhysAddr_: f75ba000 -> 00000000:0628f000
  get Phys(data[n=11+1000]=f75bb000)
AtapiVirtToPhysAddr_: f75bb000 -> 00000000:06298000
  get Phys(data[n=12+1000]=f75bc000)
AtapiVirtToPhysAddr_: f75bc000 -> 00000000:06291000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x9df, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x9df count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector a5f, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is a5f, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f75bc020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f75bc020)
AtapiVirtToPhysAddr_: f75bc020 -> 00000000:06291020
  get Phys(data[n=1+fe0]=f75bd000)
AtapiVirtToPhysAddr_: f75bd000 -> 00000000:06292000
  get Phys(data[n=1+1fe0]=f75be000)
AtapiVirtToPhysAddr_: f75be000 -> 00000000:062ab000
  get Phys(data[n=2+1000]=f75bf000)
AtapiVirtToPhysAddr_: f75bf000 -> 00000000:062ac000
  get Phys(data[n=2+2000]=f75c0000)
AtapiVirtToPhysAddr_: f75c0000 -> 00000000:0628d000
  get Phys(data[n=3+1000]=f75c1000)
AtapiVirtToPhysAddr_: f75c1000 -> 00000000:062a6000
  get Phys(data[n=4+1000]=f75c2000)
AtapiVirtToPhysAddr_: f75c2000 -> 00000000:06297000
  get Phys(data[n=5+1000]=f75c3000)
AtapiVirtToPhysAddr_: f75c3000 -> 00000000:062a0000
  get Phys(data[n=6+1000]=f75c4000)
AtapiVirtToPhysAddr_: f75c4000 -> 00000000:06299000
  get Phys(data[n=7+1000]=f75c5000)
AtapiVirtToPhysAddr_: f75c5000 -> 00000000:0629a000
  get Phys(data[n=7+2000]=f75c6000)
AtapiVirtToPhysAddr_: f75c6000 -> 00000000:062b3000
  get Phys(data[n=8+1000]=f75c7000)
AtapiVirtToPhysAddr_: f75c7000 -> 00000000:062b4000
  get Phys(data[n=8+2000]=f75c8000)
AtapiVirtToPhysAddr_: f75c8000 -> 00000000:06295000
  get Phys(data[n=9+1000]=f75c9000)
AtapiVirtToPhysAddr_: f75c9000 -> 00000000:062ae000
  get Phys(data[n=10+1000]=f75ca000)
AtapiVirtToPhysAddr_: f75ca000 -> 00000000:0629f000
  get Phys(data[n=11+1000]=f75cb000)
AtapiVirtToPhysAddr_: f75cb000 -> 00000000:062a8000
  get Phys(data[n=12+1000]=f75cc000)
AtapiVirtToPhysAddr_: f75cc000 -> 00000000:062a1000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0xa5f, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0xa5f count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector adf, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is adf, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f75cc020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f75cc020)
AtapiVirtToPhysAddr_: f75cc020 -> 00000000:062a1020
  get Phys(data[n=1+fe0]=f75cd000)
AtapiVirtToPhysAddr_: f75cd000 -> 00000000:062a2000
  get Phys(data[n=1+1fe0]=f75ce000)
AtapiVirtToPhysAddr_: f75ce000 -> 00000000:062bb000
  get Phys(data[n=2+1000]=f75cf000)
AtapiVirtToPhysAddr_: f75cf000 -> 00000000:062bc000
  get Phys(data[n=2+2000]=f75d0000)
AtapiVirtToPhysAddr_: f75d0000 -> 00000000:0629d000
  get Phys(data[n=3+1000]=f75d1000)
AtapiVirtToPhysAddr_: f75d1000 -> 00000000:062b6000
  get Phys(data[n=4+1000]=f75d2000)
AtapiVirtToPhysAddr_: f75d2000 -> 00000000:062a7000
  get Phys(data[n=5+1000]=f75d3000)
AtapiVirtToPhysAddr_: f75d3000 -> 00000000:062b0000
  get Phys(data[n=6+1000]=f75d4000)
AtapiVirtToPhysAddr_: f75d4000 -> 00000000:062a9000
  get Phys(data[n=7+1000]=f75d5000)
AtapiVirtToPhysAddr_: f75d5000 -> 00000000:062aa000
  get Phys(data[n=7+2000]=f75d6000)
AtapiVirtToPhysAddr_: f75d6000 -> 00000000:062c3000
  get Phys(data[n=8+1000]=f75d7000)
AtapiVirtToPhysAddr_: f75d7000 -> 00000000:062c4000
  get Phys(data[n=8+2000]=f75d8000)
AtapiVirtToPhysAddr_: f75d8000 -> 00000000:062a5000
  get Phys(data[n=9+1000]=f75d9000)
AtapiVirtToPhysAddr_: f75d9000 -> 00000000:062be000
  get Phys(data[n=10+1000]=f75da000)
AtapiVirtToPhysAddr_: f75da000 -> 00000000:062af000
  get Phys(data[n=11+1000]=f75db000)
AtapiVirtToPhysAddr_: f75db000 -> 00000000:062b8000
  get Phys(data[n=12+1000]=f75dc000)
AtapiVirtToPhysAddr_: f75dc000 -> 00000000:062b1000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0xadf, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0xadf count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector b5f, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is b5f, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f75dc020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f75dc020)
AtapiVirtToPhysAddr_: f75dc020 -> 00000000:062b1020
  get Phys(data[n=1+fe0]=f75dd000)
AtapiVirtToPhysAddr_: f75dd000 -> 00000000:062b2000
  get Phys(data[n=1+1fe0]=f75de000)
AtapiVirtToPhysAddr_: f75de000 -> 00000000:062cb000
  get Phys(data[n=2+1000]=f75df000)
AtapiVirtToPhysAddr_: f75df000 -> 00000000:062cc000
  get Phys(data[n=2+2000]=f75e0000)
AtapiVirtToPhysAddr_: f75e0000 -> 00000000:062ad000
  get Phys(data[n=3+1000]=f75e1000)
AtapiVirtToPhysAddr_: f75e1000 -> 00000000:062c6000
  get Phys(data[n=4+1000]=f75e2000)
AtapiVirtToPhysAddr_: f75e2000 -> 00000000:062b7000
  get Phys(data[n=5+1000]=f75e3000)
AtapiVirtToPhysAddr_: f75e3000 -> 00000000:062c0000
  get Phys(data[n=6+1000]=f75e4000)
AtapiVirtToPhysAddr_: f75e4000 -> 00000000:062b9000
  get Phys(data[n=7+1000]=f75e5000)
AtapiVirtToPhysAddr_: f75e5000 -> 00000000:062ba000
  get Phys(data[n=7+2000]=f75e6000)
AtapiVirtToPhysAddr_: f75e6000 -> 00000000:062d3000
  get Phys(data[n=8+1000]=f75e7000)
AtapiVirtToPhysAddr_: f75e7000 -> 00000000:062d4000
  get Phys(data[n=8+2000]=f75e8000)
AtapiVirtToPhysAddr_: f75e8000 -> 00000000:062b5000
  get Phys(data[n=9+1000]=f75e9000)
AtapiVirtToPhysAddr_: f75e9000 -> 00000000:062ce000
  get Phys(data[n=10+1000]=f75ea000)
AtapiVirtToPhysAddr_: f75ea000 -> 00000000:062bf000
  get Phys(data[n=11+1000]=f75eb000)
AtapiVirtToPhysAddr_: f75eb000 -> 00000000:062c8000
  get Phys(data[n=12+1000]=f75ec000)
AtapiVirtToPhysAddr_: f75ec000 -> 00000000:062c1000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0xb5f, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0xb5f count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector bdf, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is bdf, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f75ec020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f75ec020)
AtapiVirtToPhysAddr_: f75ec020 -> 00000000:062c1020
  get Phys(data[n=1+fe0]=f75ed000)
AtapiVirtToPhysAddr_: f75ed000 -> 00000000:062c2000
  get Phys(data[n=1+1fe0]=f75ee000)
AtapiVirtToPhysAddr_: f75ee000 -> 00000000:062db000
  get Phys(data[n=2+1000]=f75ef000)
AtapiVirtToPhysAddr_: f75ef000 -> 00000000:062dc000
  get Phys(data[n=2+2000]=f75f0000)
AtapiVirtToPhysAddr_: f75f0000 -> 00000000:062bd000
  get Phys(data[n=3+1000]=f75f1000)
AtapiVirtToPhysAddr_: f75f1000 -> 00000000:062d6000
  get Phys(data[n=4+1000]=f75f2000)
AtapiVirtToPhysAddr_: f75f2000 -> 00000000:062c7000
  get Phys(data[n=5+1000]=f75f3000)
AtapiVirtToPhysAddr_: f75f3000 -> 00000000:062d0000
  get Phys(data[n=6+1000]=f75f4000)
AtapiVirtToPhysAddr_: f75f4000 -> 00000000:062c9000
  get Phys(data[n=7+1000]=f75f5000)
AtapiVirtToPhysAddr_: f75f5000 -> 00000000:062ca000
  get Phys(data[n=7+2000]=f75f6000)
AtapiVirtToPhysAddr_: f75f6000 -> 00000000:062e3000
  get Phys(data[n=8+1000]=f75f7000)
AtapiVirtToPhysAddr_: f75f7000 -> 00000000:062e4000
  get Phys(data[n=8+2000]=f75f8000)
AtapiVirtToPhysAddr_: f75f8000 -> 00000000:062c5000
  get Phys(data[n=9+1000]=f75f9000)
AtapiVirtToPhysAddr_: f75f9000 -> 00000000:062de000
  get Phys(data[n=10+1000]=f75fa000)
AtapiVirtToPhysAddr_: f75fa000 -> 00000000:062cf000
  get Phys(data[n=11+1000]=f75fb000)
AtapiVirtToPhysAddr_: f75fb000 -> 00000000:062d8000
  get Phys(data[n=12+1000]=f75fc000)
AtapiVirtToPhysAddr_: f75fc000 -> 00000000:062d1000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0xbdf, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0xbdf count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector c5f, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is c5f, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f75fc020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f75fc020)
AtapiVirtToPhysAddr_: f75fc020 -> 00000000:062d1020
  get Phys(data[n=1+fe0]=f75fd000)
AtapiVirtToPhysAddr_: f75fd000 -> 00000000:062d2000
  get Phys(data[n=1+1fe0]=f75fe000)
AtapiVirtToPhysAddr_: f75fe000 -> 00000000:062eb000
  get Phys(data[n=2+1000]=f75ff000)
AtapiVirtToPhysAddr_: f75ff000 -> 00000000:062ec000
  get Phys(data[n=2+2000]=f7600000)
AtapiVirtToPhysAddr_: f7600000 -> 00000000:062cd000
  get Phys(data[n=3+1000]=f7601000)
AtapiVirtToPhysAddr_: f7601000 -> 00000000:062e6000
  get Phys(data[n=4+1000]=f7602000)
AtapiVirtToPhysAddr_: f7602000 -> 00000000:062d7000
  get Phys(data[n=5+1000]=f7603000)
AtapiVirtToPhysAddr_: f7603000 -> 00000000:062e0000
  get Phys(data[n=6+1000]=f7604000)
AtapiVirtToPhysAddr_: f7604000 -> 00000000:062d9000
  get Phys(data[n=7+1000]=f7605000)
AtapiVirtToPhysAddr_: f7605000 -> 00000000:062da000
  get Phys(data[n=7+2000]=f7606000)
AtapiVirtToPhysAddr_: f7606000 -> 00000000:062f3000
  get Phys(data[n=8+1000]=f7607000)
AtapiVirtToPhysAddr_: f7607000 -> 00000000:062f4000
  get Phys(data[n=8+2000]=f7608000)
AtapiVirtToPhysAddr_: f7608000 -> 00000000:062d5000
  get Phys(data[n=9+1000]=f7609000)
AtapiVirtToPhysAddr_: f7609000 -> 00000000:062ee000
  get Phys(data[n=10+1000]=f760a000)
AtapiVirtToPhysAddr_: f760a000 -> 00000000:062df000
  get Phys(data[n=11+1000]=f760b000)
AtapiVirtToPhysAddr_: f760b000 -> 00000000:062e8000
  get Phys(data[n=12+1000]=f760c000)
AtapiVirtToPhysAddr_: f760c000 -> 00000000:062e1000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0xc5f, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0xc5f count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector cdf, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is cdf, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f760c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f760c020)
AtapiVirtToPhysAddr_: f760c020 -> 00000000:062e1020
  get Phys(data[n=1+fe0]=f760d000)
AtapiVirtToPhysAddr_: f760d000 -> 00000000:062e2000
  get Phys(data[n=1+1fe0]=f760e000)
AtapiVirtToPhysAddr_: f760e000 -> 00000000:062fb000
  get Phys(data[n=2+1000]=f760f000)
AtapiVirtToPhysAddr_: f760f000 -> 00000000:062fc000
  get Phys(data[n=2+2000]=f7610000)
AtapiVirtToPhysAddr_: f7610000 -> 00000000:062dd000
  get Phys(data[n=3+1000]=f7611000)
AtapiVirtToPhysAddr_: f7611000 -> 00000000:062f6000
  get Phys(data[n=4+1000]=f7612000)
AtapiVirtToPhysAddr_: f7612000 -> 00000000:062e7000
  get Phys(data[n=5+1000]=f7613000)
AtapiVirtToPhysAddr_: f7613000 -> 00000000:062f0000
  get Phys(data[n=6+1000]=f7614000)
AtapiVirtToPhysAddr_: f7614000 -> 00000000:062e9000
  get Phys(data[n=7+1000]=f7615000)
AtapiVirtToPhysAddr_: f7615000 -> 00000000:062ea000
  get Phys(data[n=7+2000]=f7616000)
AtapiVirtToPhysAddr_: f7616000 -> 00000000:06303000
  get Phys(data[n=8+1000]=f7617000)
AtapiVirtToPhysAddr_: f7617000 -> 00000000:06304000
  get Phys(data[n=8+2000]=f7618000)
AtapiVirtToPhysAddr_: f7618000 -> 00000000:062e5000
  get Phys(data[n=9+1000]=f7619000)
AtapiVirtToPhysAddr_: f7619000 -> 00000000:062fe000
  get Phys(data[n=10+1000]=f761a000)
AtapiVirtToPhysAddr_: f761a000 -> 00000000:062ef000
  get Phys(data[n=11+1000]=f761b000)
AtapiVirtToPhysAddr_: f761b000 -> 00000000:062f8000
  get Phys(data[n=12+1000]=f761c000)
AtapiVirtToPhysAddr_: f761c000 -> 00000000:062f1000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0xcdf, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0xcdf count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector d5f, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is d5f, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f761c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f761c020)
AtapiVirtToPhysAddr_: f761c020 -> 00000000:062f1020
  get Phys(data[n=1+fe0]=f761d000)
AtapiVirtToPhysAddr_: f761d000 -> 00000000:062f2000
  get Phys(data[n=1+1fe0]=f761e000)
AtapiVirtToPhysAddr_: f761e000 -> 00000000:0630b000
  get Phys(data[n=2+1000]=f761f000)
AtapiVirtToPhysAddr_: f761f000 -> 00000000:0630c000
  get Phys(data[n=2+2000]=f7620000)
AtapiVirtToPhysAddr_: f7620000 -> 00000000:062ed000
  get Phys(data[n=3+1000]=f7621000)
AtapiVirtToPhysAddr_: f7621000 -> 00000000:06306000
  get Phys(data[n=4+1000]=f7622000)
AtapiVirtToPhysAddr_: f7622000 -> 00000000:062f7000
  get Phys(data[n=5+1000]=f7623000)
AtapiVirtToPhysAddr_: f7623000 -> 00000000:06300000
  get Phys(data[n=6+1000]=f7624000)
AtapiVirtToPhysAddr_: f7624000 -> 00000000:062f9000
  get Phys(data[n=7+1000]=f7625000)
AtapiVirtToPhysAddr_: f7625000 -> 00000000:062fa000
  get Phys(data[n=7+2000]=f7626000)
AtapiVirtToPhysAddr_: f7626000 -> 00000000:06313000
  get Phys(data[n=8+1000]=f7627000)
AtapiVirtToPhysAddr_: f7627000 -> 00000000:06314000
  get Phys(data[n=8+2000]=f7628000)
AtapiVirtToPhysAddr_: f7628000 -> 00000000:062f5000
  get Phys(data[n=9+1000]=f7629000)
AtapiVirtToPhysAddr_: f7629000 -> 00000000:0630e000
  get Phys(data[n=10+1000]=f762a000)
AtapiVirtToPhysAddr_: f762a000 -> 00000000:062ff000
  get Phys(data[n=11+1000]=f762b000)
AtapiVirtToPhysAddr_: f762b000 -> 00000000:06308000
  get Phys(data[n=12+1000]=f762c000)
AtapiVirtToPhysAddr_: f762c000 -> 00000000:06301000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0xd5f, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0xd5f count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector ddf, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is ddf, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f762c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f762c020)
AtapiVirtToPhysAddr_: f762c020 -> 00000000:06301020
  get Phys(data[n=1+fe0]=f762d000)
AtapiVirtToPhysAddr_: f762d000 -> 00000000:06302000
  get Phys(data[n=1+1fe0]=f762e000)
AtapiVirtToPhysAddr_: f762e000 -> 00000000:0631b000
  get Phys(data[n=2+1000]=f762f000)
AtapiVirtToPhysAddr_: f762f000 -> 00000000:0631c000
  get Phys(data[n=2+2000]=f7630000)
AtapiVirtToPhysAddr_: f7630000 -> 00000000:062fd000
  get Phys(data[n=3+1000]=f7631000)
AtapiVirtToPhysAddr_: f7631000 -> 00000000:06316000
  get Phys(data[n=4+1000]=f7632000)
AtapiVirtToPhysAddr_: f7632000 -> 00000000:06307000
  get Phys(data[n=5+1000]=f7633000)
AtapiVirtToPhysAddr_: f7633000 -> 00000000:06310000
  get Phys(data[n=6+1000]=f7634000)
AtapiVirtToPhysAddr_: f7634000 -> 00000000:06309000
  get Phys(data[n=7+1000]=f7635000)
AtapiVirtToPhysAddr_: f7635000 -> 00000000:0630a000
  get Phys(data[n=7+2000]=f7636000)
AtapiVirtToPhysAddr_: f7636000 -> 00000000:06323000
  get Phys(data[n=8+1000]=f7637000)
AtapiVirtToPhysAddr_: f7637000 -> 00000000:06324000
  get Phys(data[n=8+2000]=f7638000)
AtapiVirtToPhysAddr_: f7638000 -> 00000000:06305000
  get Phys(data[n=9+1000]=f7639000)
AtapiVirtToPhysAddr_: f7639000 -> 00000000:0631e000
  get Phys(data[n=10+1000]=f763a000)
AtapiVirtToPhysAddr_: f763a000 -> 00000000:0630f000
  get Phys(data[n=11+1000]=f763b000)
AtapiVirtToPhysAddr_: f763b000 -> 00000000:06318000
  get Phys(data[n=12+1000]=f763c000)
AtapiVirtToPhysAddr_: f763c000 -> 00000000:06311000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0xddf, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0xddf count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector e5f, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is e5f, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f763c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f763c020)
AtapiVirtToPhysAddr_: f763c020 -> 00000000:06311020
  get Phys(data[n=1+fe0]=f763d000)
AtapiVirtToPhysAddr_: f763d000 -> 00000000:06312000
  get Phys(data[n=1+1fe0]=f763e000)
AtapiVirtToPhysAddr_: f763e000 -> 00000000:0632b000
  get Phys(data[n=2+1000]=f763f000)
AtapiVirtToPhysAddr_: f763f000 -> 00000000:0632c000
  get Phys(data[n=2+2000]=f7640000)
AtapiVirtToPhysAddr_: f7640000 -> 00000000:0630d000
  get Phys(data[n=3+1000]=f7641000)
AtapiVirtToPhysAddr_: f7641000 -> 00000000:06326000
  get Phys(data[n=4+1000]=f7642000)
AtapiVirtToPhysAddr_: f7642000 -> 00000000:06317000
  get Phys(data[n=5+1000]=f7643000)
AtapiVirtToPhysAddr_: f7643000 -> 00000000:06320000
  get Phys(data[n=6+1000]=f7644000)
AtapiVirtToPhysAddr_: f7644000 -> 00000000:06319000
  get Phys(data[n=7+1000]=f7645000)
AtapiVirtToPhysAddr_: f7645000 -> 00000000:0631a000
  get Phys(data[n=7+2000]=f7646000)
AtapiVirtToPhysAddr_: f7646000 -> 00000000:06333000
  get Phys(data[n=8+1000]=f7647000)
AtapiVirtToPhysAddr_: f7647000 -> 00000000:06334000
  get Phys(data[n=8+2000]=f7648000)
AtapiVirtToPhysAddr_: f7648000 -> 00000000:06315000
  get Phys(data[n=9+1000]=f7649000)
AtapiVirtToPhysAddr_: f7649000 -> 00000000:0632e000
  get Phys(data[n=10+1000]=f764a000)
AtapiVirtToPhysAddr_: f764a000 -> 00000000:0631f000
  get Phys(data[n=11+1000]=f764b000)
AtapiVirtToPhysAddr_: f764b000 -> 00000000:06328000
  get Phys(data[n=12+1000]=f764c000)
AtapiVirtToPhysAddr_: f764c000 -> 00000000:06321000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0xe5f, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0xe5f count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector edf, OrigWordsRequested 0x3d00, DevSize 0x3d
IdeReadWrite (REQ): Starting sector is edf, Number of WORDS 0x3d00, DevSize 0x3d
AtapiDmaSetup: mode 0x44, data f764c020, count 7a00, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f764c020)
AtapiVirtToPhysAddr_: f764c020 -> 00000000:06321020
  get Phys(data[n=1+fe0]=f764d000)
AtapiVirtToPhysAddr_: f764d000 -> 00000000:06322000
  get Phys(data[n=1+1fe0]=f764e000)
AtapiVirtToPhysAddr_: f764e000 -> 00000000:0633b000
  get Phys(data[n=2+1000]=f764f000)
AtapiVirtToPhysAddr_: f764f000 -> 00000000:0633c000
  get Phys(data[n=2+2000]=f7650000)
AtapiVirtToPhysAddr_: f7650000 -> 00000000:0631d000
  get Phys(data[n=3+1000]=f7651000)
AtapiVirtToPhysAddr_: f7651000 -> 00000000:06336000
  get Phys(data[n=4+1000]=f7652000)
AtapiVirtToPhysAddr_: f7652000 -> 00000000:06327000
  get Phys(data[n=5+1000]=f7653000)
AtapiVirtToPhysAddr_: f7653000 -> 00000000:06330000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0xedf, Count 0x3d(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0xedf count 0x3d feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 7a00, full size 7a00
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector f1c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is f1c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f747c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f747c020)
AtapiVirtToPhysAddr_: f747c020 -> 00000000:06501020
  get Phys(data[n=1+fe0]=f747d000)
AtapiVirtToPhysAddr_: f747d000 -> 00000000:06502000
  get Phys(data[n=1+1fe0]=f747e000)
AtapiVirtToPhysAddr_: f747e000 -> 00000000:0651b000
  get Phys(data[n=2+1000]=f747f000)
AtapiVirtToPhysAddr_: f747f000 -> 00000000:0651c000
  get Phys(data[n=2+2000]=f7480000)
AtapiVirtToPhysAddr_: f7480000 -> 00000000:064fd000
  get Phys(data[n=3+1000]=f7481000)
AtapiVirtToPhysAddr_: f7481000 -> 00000000:06516000
  get Phys(data[n=4+1000]=f7482000)
AtapiVirtToPhysAddr_: f7482000 -> 00000000:06507000
  get Phys(data[n=5+1000]=f7483000)
AtapiVirtToPhysAddr_: f7483000 -> 00000000:06510000
  get Phys(data[n=6+1000]=f7484000)
AtapiVirtToPhysAddr_: f7484000 -> 00000000:06509000
  get Phys(data[n=7+1000]=f7485000)
AtapiVirtToPhysAddr_: f7485000 -> 00000000:0650a000
  get Phys(data[n=7+2000]=f7486000)
AtapiVirtToPhysAddr_: f7486000 -> 00000000:06523000
  get Phys(data[n=8+1000]=f7487000)
AtapiVirtToPhysAddr_: f7487000 -> 00000000:06524000
  get Phys(data[n=8+2000]=f7488000)
AtapiVirtToPhysAddr_: f7488000 -> 00000000:06505000
  get Phys(data[n=9+1000]=f7489000)
AtapiVirtToPhysAddr_: f7489000 -> 00000000:0651e000
  get Phys(data[n=10+1000]=f748a000)
AtapiVirtToPhysAddr_: f748a000 -> 00000000:0650f000
  get Phys(data[n=11+1000]=f748b000)
AtapiVirtToPhysAddr_: f748b000 -> 00000000:06518000
  get Phys(data[n=12+1000]=f748c000)
AtapiVirtToPhysAddr_: f748c000 -> 00000000:06511000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0xf1c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0xf1c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector f9c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is f9c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f748c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f748c020)
AtapiVirtToPhysAddr_: f748c020 -> 00000000:06511020
  get Phys(data[n=1+fe0]=f748d000)
AtapiVirtToPhysAddr_: f748d000 -> 00000000:06512000
  get Phys(data[n=1+1fe0]=f748e000)
AtapiVirtToPhysAddr_: f748e000 -> 00000000:0652b000
  get Phys(data[n=2+1000]=f748f000)
AtapiVirtToPhysAddr_: f748f000 -> 00000000:0652c000
  get Phys(data[n=2+2000]=f7490000)
AtapiVirtToPhysAddr_: f7490000 -> 00000000:0650d000
  get Phys(data[n=3+1000]=f7491000)
AtapiVirtToPhysAddr_: f7491000 -> 00000000:06526000
  get Phys(data[n=4+1000]=f7492000)
AtapiVirtToPhysAddr_: f7492000 -> 00000000:06517000
  get Phys(data[n=5+1000]=f7493000)
AtapiVirtToPhysAddr_: f7493000 -> 00000000:06520000
  get Phys(data[n=6+1000]=f7494000)
AtapiVirtToPhysAddr_: f7494000 -> 00000000:06519000
  get Phys(data[n=7+1000]=f7495000)
AtapiVirtToPhysAddr_: f7495000 -> 00000000:0651a000
  get Phys(data[n=7+2000]=f7496000)
AtapiVirtToPhysAddr_: f7496000 -> 00000000:06533000
  get Phys(data[n=8+1000]=f7497000)
AtapiVirtToPhysAddr_: f7497000 -> 00000000:06534000
  get Phys(data[n=8+2000]=f7498000)
AtapiVirtToPhysAddr_: f7498000 -> 00000000:06515000
  get Phys(data[n=9+1000]=f7499000)
AtapiVirtToPhysAddr_: f7499000 -> 00000000:0652e000
  get Phys(data[n=10+1000]=f749a000)
AtapiVirtToPhysAddr_: f749a000 -> 00000000:0651f000
  get Phys(data[n=11+1000]=f749b000)
AtapiVirtToPhysAddr_: f749b000 -> 00000000:06528000
  get Phys(data[n=12+1000]=f749c000)
AtapiVirtToPhysAddr_: f749c000 -> 00000000:06521000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0xf9c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0xf9c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 101c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 101c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f749c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f749c020)
AtapiVirtToPhysAddr_: f749c020 -> 00000000:06521020
  get Phys(data[n=1+fe0]=f749d000)
AtapiVirtToPhysAddr_: f749d000 -> 00000000:06522000
  get Phys(data[n=1+1fe0]=f749e000)
AtapiVirtToPhysAddr_: f749e000 -> 00000000:0653b000
  get Phys(data[n=2+1000]=f749f000)
AtapiVirtToPhysAddr_: f749f000 -> 00000000:0653c000
  get Phys(data[n=2+2000]=f74a0000)
AtapiVirtToPhysAddr_: f74a0000 -> 00000000:0651d000
  get Phys(data[n=3+1000]=f74a1000)
AtapiVirtToPhysAddr_: f74a1000 -> 00000000:06536000
  get Phys(data[n=4+1000]=f74a2000)
AtapiVirtToPhysAddr_: f74a2000 -> 00000000:06527000
  get Phys(data[n=5+1000]=f74a3000)
AtapiVirtToPhysAddr_: f74a3000 -> 00000000:06530000
  get Phys(data[n=6+1000]=f74a4000)
AtapiVirtToPhysAddr_: f74a4000 -> 00000000:06529000
  get Phys(data[n=7+1000]=f74a5000)
AtapiVirtToPhysAddr_: f74a5000 -> 00000000:0652a000
  get Phys(data[n=7+2000]=f74a6000)
AtapiVirtToPhysAddr_: f74a6000 -> 00000000:06543000
  get Phys(data[n=8+1000]=f74a7000)
AtapiVirtToPhysAddr_: f74a7000 -> 00000000:06544000
  get Phys(data[n=8+2000]=f74a8000)
AtapiVirtToPhysAddr_: f74a8000 -> 00000000:06525000
  get Phys(data[n=9+1000]=f74a9000)
AtapiVirtToPhysAddr_: f74a9000 -> 00000000:0653e000
  get Phys(data[n=10+1000]=f74aa000)
AtapiVirtToPhysAddr_: f74aa000 -> 00000000:0652f000
  get Phys(data[n=11+1000]=f74ab000)
AtapiVirtToPhysAddr_: f74ab000 -> 00000000:06538000
  get Phys(data[n=12+1000]=f74ac000)
AtapiVirtToPhysAddr_: f74ac000 -> 00000000:06531000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x101c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x101c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 109c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 109c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f74ac020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f74ac020)
AtapiVirtToPhysAddr_: f74ac020 -> 00000000:06531020
  get Phys(data[n=1+fe0]=f74ad000)
AtapiVirtToPhysAddr_: f74ad000 -> 00000000:06532000
  get Phys(data[n=1+1fe0]=f74ae000)
AtapiVirtToPhysAddr_: f74ae000 -> 00000000:0654b000
  get Phys(data[n=2+1000]=f74af000)
AtapiVirtToPhysAddr_: f74af000 -> 00000000:0654c000
  get Phys(data[n=2+2000]=f74b0000)
AtapiVirtToPhysAddr_: f74b0000 -> 00000000:0652d000
  get Phys(data[n=3+1000]=f74b1000)
AtapiVirtToPhysAddr_: f74b1000 -> 00000000:06546000
  get Phys(data[n=4+1000]=f74b2000)
AtapiVirtToPhysAddr_: f74b2000 -> 00000000:06537000
  get Phys(data[n=5+1000]=f74b3000)
AtapiVirtToPhysAddr_: f74b3000 -> 00000000:06540000
  get Phys(data[n=6+1000]=f74b4000)
AtapiVirtToPhysAddr_: f74b4000 -> 00000000:06539000
  get Phys(data[n=7+1000]=f74b5000)
AtapiVirtToPhysAddr_: f74b5000 -> 00000000:0653a000
  get Phys(data[n=7+2000]=f74b6000)
AtapiVirtToPhysAddr_: f74b6000 -> 00000000:06553000
  get Phys(data[n=8+1000]=f74b7000)
AtapiVirtToPhysAddr_: f74b7000 -> 00000000:06554000
  get Phys(data[n=8+2000]=f74b8000)
AtapiVirtToPhysAddr_: f74b8000 -> 00000000:06535000
  get Phys(data[n=9+1000]=f74b9000)
AtapiVirtToPhysAddr_: f74b9000 -> 00000000:0654e000
  get Phys(data[n=10+1000]=f74ba000)
AtapiVirtToPhysAddr_: f74ba000 -> 00000000:0653f000
  get Phys(data[n=11+1000]=f74bb000)
AtapiVirtToPhysAddr_: f74bb000 -> 00000000:06548000
  get Phys(data[n=12+1000]=f74bc000)
AtapiVirtToPhysAddr_: f74bc000 -> 00000000:06541000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x109c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x109c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 111c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 111c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f74bc020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f74bc020)
AtapiVirtToPhysAddr_: f74bc020 -> 00000000:06541020
  get Phys(data[n=1+fe0]=f74bd000)
AtapiVirtToPhysAddr_: f74bd000 -> 00000000:06542000
  get Phys(data[n=1+1fe0]=f74be000)
AtapiVirtToPhysAddr_: f74be000 -> 00000000:0655b000
  get Phys(data[n=2+1000]=f74bf000)
AtapiVirtToPhysAddr_: f74bf000 -> 00000000:0655c000
  get Phys(data[n=2+2000]=f74c0000)
AtapiVirtToPhysAddr_: f74c0000 -> 00000000:0653d000
  get Phys(data[n=3+1000]=f74c1000)
AtapiVirtToPhysAddr_: f74c1000 -> 00000000:06556000
  get Phys(data[n=4+1000]=f74c2000)
AtapiVirtToPhysAddr_: f74c2000 -> 00000000:06547000
  get Phys(data[n=5+1000]=f74c3000)
AtapiVirtToPhysAddr_: f74c3000 -> 00000000:06550000
  get Phys(data[n=6+1000]=f74c4000)
AtapiVirtToPhysAddr_: f74c4000 -> 00000000:06549000
  get Phys(data[n=7+1000]=f74c5000)
AtapiVirtToPhysAddr_: f74c5000 -> 00000000:0654a000
  get Phys(data[n=7+2000]=f74c6000)
AtapiVirtToPhysAddr_: f74c6000 -> 00000000:06563000
  get Phys(data[n=8+1000]=f74c7000)
AtapiVirtToPhysAddr_: f74c7000 -> 00000000:06564000
  get Phys(data[n=8+2000]=f74c8000)
AtapiVirtToPhysAddr_: f74c8000 -> 00000000:06545000
  get Phys(data[n=9+1000]=f74c9000)
AtapiVirtToPhysAddr_: f74c9000 -> 00000000:0655e000
  get Phys(data[n=10+1000]=f74ca000)
AtapiVirtToPhysAddr_: f74ca000 -> 00000000:0654f000
  get Phys(data[n=11+1000]=f74cb000)
AtapiVirtToPhysAddr_: f74cb000 -> 00000000:06558000
  get Phys(data[n=12+1000]=f74cc000)
AtapiVirtToPhysAddr_: f74cc000 -> 00000000:06551000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x111c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x111c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 119c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 119c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f74cc020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f74cc020)
AtapiVirtToPhysAddr_: f74cc020 -> 00000000:06551020
  get Phys(data[n=1+fe0]=f74cd000)
AtapiVirtToPhysAddr_: f74cd000 -> 00000000:06552000
  get Phys(data[n=1+1fe0]=f74ce000)
AtapiVirtToPhysAddr_: f74ce000 -> 00000000:0656b000
  get Phys(data[n=2+1000]=f74cf000)
AtapiVirtToPhysAddr_: f74cf000 -> 00000000:0656c000
  get Phys(data[n=2+2000]=f74d0000)
AtapiVirtToPhysAddr_: f74d0000 -> 00000000:0654d000
  get Phys(data[n=3+1000]=f74d1000)
AtapiVirtToPhysAddr_: f74d1000 -> 00000000:06566000
  get Phys(data[n=4+1000]=f74d2000)
AtapiVirtToPhysAddr_: f74d2000 -> 00000000:06557000
  get Phys(data[n=5+1000]=f74d3000)
AtapiVirtToPhysAddr_: f74d3000 -> 00000000:06560000
  get Phys(data[n=6+1000]=f74d4000)
AtapiVirtToPhysAddr_: f74d4000 -> 00000000:06559000
  get Phys(data[n=7+1000]=f74d5000)
AtapiVirtToPhysAddr_: f74d5000 -> 00000000:0655a000
  get Phys(data[n=7+2000]=f74d6000)
AtapiVirtToPhysAddr_: f74d6000 -> 00000000:06573000
  get Phys(data[n=8+1000]=f74d7000)
AtapiVirtToPhysAddr_: f74d7000 -> 00000000:06574000
  get Phys(data[n=8+2000]=f74d8000)
AtapiVirtToPhysAddr_: f74d8000 -> 00000000:06555000
  get Phys(data[n=9+1000]=f74d9000)
AtapiVirtToPhysAddr_: f74d9000 -> 00000000:0656e000
  get Phys(data[n=10+1000]=f74da000)
AtapiVirtToPhysAddr_: f74da000 -> 00000000:0655f000
  get Phys(data[n=11+1000]=f74db000)
AtapiVirtToPhysAddr_: f74db000 -> 00000000:06568000
  get Phys(data[n=12+1000]=f74dc000)
AtapiVirtToPhysAddr_: f74dc000 -> 00000000:06562000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x119c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x119c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 121c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 121c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f74dc020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f74dc020)
AtapiVirtToPhysAddr_: f74dc020 -> 00000000:06562020
  get Phys(data[n=1+fe0]=f74dd000)
AtapiVirtToPhysAddr_: f74dd000 -> 00000000:0657b000
  get Phys(data[n=2+1000]=f74de000)
AtapiVirtToPhysAddr_: f74de000 -> 00000000:0657c000
  get Phys(data[n=2+2000]=f74df000)
AtapiVirtToPhysAddr_: f74df000 -> 00000000:0655d000
  get Phys(data[n=3+1000]=f74e0000)
AtapiVirtToPhysAddr_: f74e0000 -> 00000000:06576000
  get Phys(data[n=4+1000]=f74e1000)
AtapiVirtToPhysAddr_: f74e1000 -> 00000000:06567000
  get Phys(data[n=5+1000]=f74e2000)
AtapiVirtToPhysAddr_: f74e2000 -> 00000000:06570000
  get Phys(data[n=6+1000]=f74e3000)
AtapiVirtToPhysAddr_: f74e3000 -> 00000000:06569000
  get Phys(data[n=7+1000]=f74e4000)
AtapiVirtToPhysAddr_: f74e4000 -> 00000000:0656a000
  get Phys(data[n=7+2000]=f74e5000)
AtapiVirtToPhysAddr_: f74e5000 -> 00000000:06583000
  get Phys(data[n=8+1000]=f74e6000)
AtapiVirtToPhysAddr_: f74e6000 -> 00000000:06584000
  get Phys(data[n=8+2000]=f74e7000)
AtapiVirtToPhysAddr_: f74e7000 -> 00000000:06565000
  get Phys(data[n=9+1000]=f74e8000)
AtapiVirtToPhysAddr_: f74e8000 -> 00000000:0657e000
  get Phys(data[n=10+1000]=f74e9000)
AtapiVirtToPhysAddr_: f74e9000 -> 00000000:0656f000
  get Phys(data[n=11+1000]=f74ea000)
AtapiVirtToPhysAddr_: f74ea000 -> 00000000:06578000
  get Phys(data[n=12+1000]=f74eb000)
AtapiVirtToPhysAddr_: f74eb000 -> 00000000:06571000
  get Phys(data[n=13+1000]=f74ec000)
AtapiVirtToPhysAddr_: f74ec000 -> 00000000:06572000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x121c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x121c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 129c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 129c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f74ec020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f74ec020)
AtapiVirtToPhysAddr_: f74ec020 -> 00000000:06572020
  get Phys(data[n=1+fe0]=f74ed000)
AtapiVirtToPhysAddr_: f74ed000 -> 00000000:0658b000
  get Phys(data[n=2+1000]=f74ee000)
AtapiVirtToPhysAddr_: f74ee000 -> 00000000:0658c000
  get Phys(data[n=2+2000]=f74ef000)
AtapiVirtToPhysAddr_: f74ef000 -> 00000000:0656d000
  get Phys(data[n=3+1000]=f74f0000)
AtapiVirtToPhysAddr_: f74f0000 -> 00000000:06586000
  get Phys(data[n=4+1000]=f74f1000)
AtapiVirtToPhysAddr_: f74f1000 -> 00000000:06577000
  get Phys(data[n=5+1000]=f74f2000)
AtapiVirtToPhysAddr_: f74f2000 -> 00000000:06580000
  get Phys(data[n=6+1000]=f74f3000)
AtapiVirtToPhysAddr_: f74f3000 -> 00000000:06579000
  get Phys(data[n=7+1000]=f74f4000)
AtapiVirtToPhysAddr_: f74f4000 -> 00000000:0657a000
  get Phys(data[n=7+2000]=f74f5000)
AtapiVirtToPhysAddr_: f74f5000 -> 00000000:06593000
  get Phys(data[n=8+1000]=f74f6000)
AtapiVirtToPhysAddr_: f74f6000 -> 00000000:06594000
  get Phys(data[n=8+2000]=f74f7000)
AtapiVirtToPhysAddr_: f74f7000 -> 00000000:06575000
  get Phys(data[n=9+1000]=f74f8000)
AtapiVirtToPhysAddr_: f74f8000 -> 00000000:0658e000
  get Phys(data[n=10+1000]=f74f9000)
AtapiVirtToPhysAddr_: f74f9000 -> 00000000:0657f000
  get Phys(data[n=11+1000]=f74fa000)
AtapiVirtToPhysAddr_: f74fa000 -> 00000000:06588000
  get Phys(data[n=12+1000]=f74fb000)
AtapiVirtToPhysAddr_: f74fb000 -> 00000000:06581000
  get Phys(data[n=13+1000]=f74fc000)
AtapiVirtToPhysAddr_: f74fc000 -> 00000000:06582000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x129c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x129c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 131c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 131c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f74fc020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f74fc020)
AtapiVirtToPhysAddr_: f74fc020 -> 00000000:06582020
  get Phys(data[n=1+fe0]=f74fd000)
AtapiVirtToPhysAddr_: f74fd000 -> 00000000:0659b000
  get Phys(data[n=2+1000]=f74fe000)
AtapiVirtToPhysAddr_: f74fe000 -> 00000000:0659c000
  get Phys(data[n=2+2000]=f74ff000)
AtapiVirtToPhysAddr_: f74ff000 -> 00000000:0657d000
  get Phys(data[n=3+1000]=f7500000)
AtapiVirtToPhysAddr_: f7500000 -> 00000000:06596000
  get Phys(data[n=4+1000]=f7501000)
AtapiVirtToPhysAddr_: f7501000 -> 00000000:06587000
  get Phys(data[n=5+1000]=f7502000)
AtapiVirtToPhysAddr_: f7502000 -> 00000000:06590000
  get Phys(data[n=6+1000]=f7503000)
AtapiVirtToPhysAddr_: f7503000 -> 00000000:06589000
  get Phys(data[n=7+1000]=f7504000)
AtapiVirtToPhysAddr_: f7504000 -> 00000000:0658a000
  get Phys(data[n=7+2000]=f7505000)
AtapiVirtToPhysAddr_: f7505000 -> 00000000:065a3000
  get Phys(data[n=8+1000]=f7506000)
AtapiVirtToPhysAddr_: f7506000 -> 00000000:065a4000
  get Phys(data[n=8+2000]=f7507000)
AtapiVirtToPhysAddr_: f7507000 -> 00000000:06585000
  get Phys(data[n=9+1000]=f7508000)
AtapiVirtToPhysAddr_: f7508000 -> 00000000:0659e000
  get Phys(data[n=10+1000]=f7509000)
AtapiVirtToPhysAddr_: f7509000 -> 00000000:0658f000
  get Phys(data[n=11+1000]=f750a000)
AtapiVirtToPhysAddr_: f750a000 -> 00000000:06598000
  get Phys(data[n=12+1000]=f750b000)
AtapiVirtToPhysAddr_: f750b000 -> 00000000:06591000
  get Phys(data[n=13+1000]=f750c000)
AtapiVirtToPhysAddr_: f750c000 -> 00000000:06592000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x131c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x131c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 139c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 139c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f750c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f750c020)
AtapiVirtToPhysAddr_: f750c020 -> 00000000:06592020
  get Phys(data[n=1+fe0]=f750d000)
AtapiVirtToPhysAddr_: f750d000 -> 00000000:065ab000
  get Phys(data[n=2+1000]=f750e000)
AtapiVirtToPhysAddr_: f750e000 -> 00000000:065ac000
  get Phys(data[n=2+2000]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:0658d000
  get Phys(data[n=3+1000]=f7510000)
AtapiVirtToPhysAddr_: f7510000 -> 00000000:065a6000
  get Phys(data[n=4+1000]=f7511000)
AtapiVirtToPhysAddr_: f7511000 -> 00000000:06597000
  get Phys(data[n=5+1000]=f7512000)
AtapiVirtToPhysAddr_: f7512000 -> 00000000:065a0000
  get Phys(data[n=6+1000]=f7513000)
AtapiVirtToPhysAddr_: f7513000 -> 00000000:06599000
  get Phys(data[n=7+1000]=f7514000)
AtapiVirtToPhysAddr_: f7514000 -> 00000000:0659a000
  get Phys(data[n=7+2000]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:065b3000
  get Phys(data[n=8+1000]=f7516000)
AtapiVirtToPhysAddr_: f7516000 -> 00000000:065b4000
  get Phys(data[n=8+2000]=f7517000)
AtapiVirtToPhysAddr_: f7517000 -> 00000000:06595000
  get Phys(data[n=9+1000]=f7518000)
AtapiVirtToPhysAddr_: f7518000 -> 00000000:065ae000
  get Phys(data[n=10+1000]=f7519000)
AtapiVirtToPhysAddr_: f7519000 -> 00000000:0659f000
  get Phys(data[n=11+1000]=f751a000)
AtapiVirtToPhysAddr_: f751a000 -> 00000000:065a8000
  get Phys(data[n=12+1000]=f751b000)
AtapiVirtToPhysAddr_: f751b000 -> 00000000:065a1000
  get Phys(data[n=13+1000]=f751c000)
AtapiVirtToPhysAddr_: f751c000 -> 00000000:065a2000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x139c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x139c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 141c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 141c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f751c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f751c020)
AtapiVirtToPhysAddr_: f751c020 -> 00000000:065a2020
  get Phys(data[n=1+fe0]=f751d000)
AtapiVirtToPhysAddr_: f751d000 -> 00000000:065bb000
  get Phys(data[n=2+1000]=f751e000)
AtapiVirtToPhysAddr_: f751e000 -> 00000000:065bc000
  get Phys(data[n=2+2000]=f751f000)
AtapiVirtToPhysAddr_: f751f000 -> 00000000:0659d000
  get Phys(data[n=3+1000]=f7520000)
AtapiVirtToPhysAddr_: f7520000 -> 00000000:065b6000
  get Phys(data[n=4+1000]=f7521000)
AtapiVirtToPhysAddr_: f7521000 -> 00000000:065a7000
  get Phys(data[n=5+1000]=f7522000)
AtapiVirtToPhysAddr_: f7522000 -> 00000000:065b0000
  get Phys(data[n=6+1000]=f7523000)
AtapiVirtToPhysAddr_: f7523000 -> 00000000:065a9000
  get Phys(data[n=7+1000]=f7524000)
AtapiVirtToPhysAddr_: f7524000 -> 00000000:065aa000
  get Phys(data[n=7+2000]=f7525000)
AtapiVirtToPhysAddr_: f7525000 -> 00000000:065c3000
  get Phys(data[n=8+1000]=f7526000)
AtapiVirtToPhysAddr_: f7526000 -> 00000000:065c4000
  get Phys(data[n=8+2000]=f7527000)
AtapiVirtToPhysAddr_: f7527000 -> 00000000:065a5000
  get Phys(data[n=9+1000]=f7528000)
AtapiVirtToPhysAddr_: f7528000 -> 00000000:065be000
  get Phys(data[n=10+1000]=f7529000)
AtapiVirtToPhysAddr_: f7529000 -> 00000000:065af000
  get Phys(data[n=11+1000]=f752a000)
AtapiVirtToPhysAddr_: f752a000 -> 00000000:065b8000
  get Phys(data[n=12+1000]=f752b000)
AtapiVirtToPhysAddr_: f752b000 -> 00000000:065b1000
  get Phys(data[n=13+1000]=f752c000)
AtapiVirtToPhysAddr_: f752c000 -> 00000000:065b2000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x141c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x141c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 149c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 149c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f752c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f752c020)
AtapiVirtToPhysAddr_: f752c020 -> 00000000:065b2020
  get Phys(data[n=1+fe0]=f752d000)
AtapiVirtToPhysAddr_: f752d000 -> 00000000:065cb000
  get Phys(data[n=2+1000]=f752e000)
AtapiVirtToPhysAddr_: f752e000 -> 00000000:065cc000
  get Phys(data[n=2+2000]=f752f000)
AtapiVirtToPhysAddr_: f752f000 -> 00000000:065ad000
  get Phys(data[n=3+1000]=f7530000)
AtapiVirtToPhysAddr_: f7530000 -> 00000000:065c6000
  get Phys(data[n=4+1000]=f7531000)
AtapiVirtToPhysAddr_: f7531000 -> 00000000:065b7000
  get Phys(data[n=5+1000]=f7532000)
AtapiVirtToPhysAddr_: f7532000 -> 00000000:065c0000
  get Phys(data[n=6+1000]=f7533000)
AtapiVirtToPhysAddr_: f7533000 -> 00000000:065b9000
  get Phys(data[n=7+1000]=f7534000)
AtapiVirtToPhysAddr_: f7534000 -> 00000000:065ba000
  get Phys(data[n=7+2000]=f7535000)
AtapiVirtToPhysAddr_: f7535000 -> 00000000:065d3000
  get Phys(data[n=8+1000]=f7536000)
AtapiVirtToPhysAddr_: f7536000 -> 00000000:065d4000
  get Phys(data[n=8+2000]=f7537000)
AtapiVirtToPhysAddr_: f7537000 -> 00000000:065b5000
  get Phys(data[n=9+1000]=f7538000)
AtapiVirtToPhysAddr_: f7538000 -> 00000000:065ce000
  get Phys(data[n=10+1000]=f7539000)
AtapiVirtToPhysAddr_: f7539000 -> 00000000:065bf000
  get Phys(data[n=11+1000]=f753a000)
AtapiVirtToPhysAddr_: f753a000 -> 00000000:065c8000
  get Phys(data[n=12+1000]=f753b000)
AtapiVirtToPhysAddr_: f753b000 -> 00000000:065c1000
  get Phys(data[n=13+1000]=f753c000)
AtapiVirtToPhysAddr_: f753c000 -> 00000000:065c2000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x149c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x149c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 151c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 151c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f753c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f753c020)
AtapiVirtToPhysAddr_: f753c020 -> 00000000:065c2020
  get Phys(data[n=1+fe0]=f753d000)
AtapiVirtToPhysAddr_: f753d000 -> 00000000:065db000
  get Phys(data[n=2+1000]=f753e000)
AtapiVirtToPhysAddr_: f753e000 -> 00000000:065dc000
  get Phys(data[n=2+2000]=f753f000)
AtapiVirtToPhysAddr_: f753f000 -> 00000000:065bd000
  get Phys(data[n=3+1000]=f7540000)
AtapiVirtToPhysAddr_: f7540000 -> 00000000:065d6000
  get Phys(data[n=4+1000]=f7541000)
AtapiVirtToPhysAddr_: f7541000 -> 00000000:065c7000
  get Phys(data[n=5+1000]=f7542000)
AtapiVirtToPhysAddr_: f7542000 -> 00000000:065d0000
  get Phys(data[n=6+1000]=f7543000)
AtapiVirtToPhysAddr_: f7543000 -> 00000000:065c9000
  get Phys(data[n=7+1000]=f7544000)
AtapiVirtToPhysAddr_: f7544000 -> 00000000:065ca000
  get Phys(data[n=7+2000]=f7545000)
AtapiVirtToPhysAddr_: f7545000 -> 00000000:065e3000
  get Phys(data[n=8+1000]=f7546000)
AtapiVirtToPhysAddr_: f7546000 -> 00000000:065e4000
  get Phys(data[n=8+2000]=f7547000)
AtapiVirtToPhysAddr_: f7547000 -> 00000000:065c5000
  get Phys(data[n=9+1000]=f7548000)
AtapiVirtToPhysAddr_: f7548000 -> 00000000:065de000
  get Phys(data[n=10+1000]=f7549000)
AtapiVirtToPhysAddr_: f7549000 -> 00000000:065cf000
  get Phys(data[n=11+1000]=f754a000)
AtapiVirtToPhysAddr_: f754a000 -> 00000000:065d8000
  get Phys(data[n=12+1000]=f754b000)
AtapiVirtToPhysAddr_: f754b000 -> 00000000:065d1000
  get Phys(data[n=13+1000]=f754c000)
AtapiVirtToPhysAddr_: f754c000 -> 00000000:065d2000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x151c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x151c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 159c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 159c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f754c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f754c020)
AtapiVirtToPhysAddr_: f754c020 -> 00000000:065d2020
  get Phys(data[n=1+fe0]=f754d000)
AtapiVirtToPhysAddr_: f754d000 -> 00000000:065eb000
  get Phys(data[n=2+1000]=f754e000)
AtapiVirtToPhysAddr_: f754e000 -> 00000000:065ec000
  get Phys(data[n=2+2000]=f754f000)
AtapiVirtToPhysAddr_: f754f000 -> 00000000:065cd000
  get Phys(data[n=3+1000]=f7550000)
AtapiVirtToPhysAddr_: f7550000 -> 00000000:065e6000
  get Phys(data[n=4+1000]=f7551000)
AtapiVirtToPhysAddr_: f7551000 -> 00000000:065d7000
  get Phys(data[n=5+1000]=f7552000)
AtapiVirtToPhysAddr_: f7552000 -> 00000000:065e0000
  get Phys(data[n=6+1000]=f7553000)
AtapiVirtToPhysAddr_: f7553000 -> 00000000:065d9000
  get Phys(data[n=7+1000]=f7554000)
AtapiVirtToPhysAddr_: f7554000 -> 00000000:065da000
  get Phys(data[n=7+2000]=f7555000)
AtapiVirtToPhysAddr_: f7555000 -> 00000000:065f3000
  get Phys(data[n=8+1000]=f7556000)
AtapiVirtToPhysAddr_: f7556000 -> 00000000:065f4000
  get Phys(data[n=8+2000]=f7557000)
AtapiVirtToPhysAddr_: f7557000 -> 00000000:065d5000
  get Phys(data[n=9+1000]=f7558000)
AtapiVirtToPhysAddr_: f7558000 -> 00000000:065ee000
  get Phys(data[n=10+1000]=f7559000)
AtapiVirtToPhysAddr_: f7559000 -> 00000000:065df000
  get Phys(data[n=11+1000]=f755a000)
AtapiVirtToPhysAddr_: f755a000 -> 00000000:065e8000
  get Phys(data[n=12+1000]=f755b000)
AtapiVirtToPhysAddr_: f755b000 -> 00000000:065e1000
  get Phys(data[n=13+1000]=f755c000)
AtapiVirtToPhysAddr_: f755c000 -> 00000000:065e2000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x159c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x159c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 161c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 161c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f755c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f755c020)
AtapiVirtToPhysAddr_: f755c020 -> 00000000:065e2020
  get Phys(data[n=1+fe0]=f755d000)
AtapiVirtToPhysAddr_: f755d000 -> 00000000:065fb000
  get Phys(data[n=2+1000]=f755e000)
AtapiVirtToPhysAddr_: f755e000 -> 00000000:065fc000
  get Phys(data[n=2+2000]=f755f000)
AtapiVirtToPhysAddr_: f755f000 -> 00000000:065dd000
  get Phys(data[n=3+1000]=f7560000)
AtapiVirtToPhysAddr_: f7560000 -> 00000000:065f6000
  get Phys(data[n=4+1000]=f7561000)
AtapiVirtToPhysAddr_: f7561000 -> 00000000:065e7000
  get Phys(data[n=5+1000]=f7562000)
AtapiVirtToPhysAddr_: f7562000 -> 00000000:065f0000
  get Phys(data[n=6+1000]=f7563000)
AtapiVirtToPhysAddr_: f7563000 -> 00000000:065e9000
  get Phys(data[n=7+1000]=f7564000)
AtapiVirtToPhysAddr_: f7564000 -> 00000000:065ea000
  get Phys(data[n=7+2000]=f7565000)
AtapiVirtToPhysAddr_: f7565000 -> 00000000:06603000
  get Phys(data[n=8+1000]=f7566000)
AtapiVirtToPhysAddr_: f7566000 -> 00000000:06604000
  get Phys(data[n=8+2000]=f7567000)
AtapiVirtToPhysAddr_: f7567000 -> 00000000:065e5000
  get Phys(data[n=9+1000]=f7568000)
AtapiVirtToPhysAddr_: f7568000 -> 00000000:065fe000
  get Phys(data[n=10+1000]=f7569000)
AtapiVirtToPhysAddr_: f7569000 -> 00000000:065ef000
  get Phys(data[n=11+1000]=f756a000)
AtapiVirtToPhysAddr_: f756a000 -> 00000000:065f8000
  get Phys(data[n=12+1000]=f756b000)
AtapiVirtToPhysAddr_: f756b000 -> 00000000:065f1000
  get Phys(data[n=13+1000]=f756c000)
AtapiVirtToPhysAddr_: f756c000 -> 00000000:065f2000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x161c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x161c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 169c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 169c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f756c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f756c020)
AtapiVirtToPhysAddr_: f756c020 -> 00000000:065f2020
  get Phys(data[n=1+fe0]=f756d000)
AtapiVirtToPhysAddr_: f756d000 -> 00000000:0660b000
  get Phys(data[n=2+1000]=f756e000)
AtapiVirtToPhysAddr_: f756e000 -> 00000000:0660c000
  get Phys(data[n=2+2000]=f756f000)
AtapiVirtToPhysAddr_: f756f000 -> 00000000:065ed000
  get Phys(data[n=3+1000]=f7570000)
AtapiVirtToPhysAddr_: f7570000 -> 00000000:06606000
  get Phys(data[n=4+1000]=f7571000)
AtapiVirtToPhysAddr_: f7571000 -> 00000000:065f7000
  get Phys(data[n=5+1000]=f7572000)
AtapiVirtToPhysAddr_: f7572000 -> 00000000:06600000
  get Phys(data[n=6+1000]=f7573000)
AtapiVirtToPhysAddr_: f7573000 -> 00000000:065f9000
  get Phys(data[n=7+1000]=f7574000)
AtapiVirtToPhysAddr_: f7574000 -> 00000000:065fa000
  get Phys(data[n=7+2000]=f7575000)
AtapiVirtToPhysAddr_: f7575000 -> 00000000:06613000
  get Phys(data[n=8+1000]=f7576000)
AtapiVirtToPhysAddr_: f7576000 -> 00000000:06614000
  get Phys(data[n=8+2000]=f7577000)
AtapiVirtToPhysAddr_: f7577000 -> 00000000:065f5000
  get Phys(data[n=9+1000]=f7578000)
AtapiVirtToPhysAddr_: f7578000 -> 00000000:0660e000
  get Phys(data[n=10+1000]=f7579000)
AtapiVirtToPhysAddr_: f7579000 -> 00000000:065ff000
  get Phys(data[n=11+1000]=f757a000)
AtapiVirtToPhysAddr_: f757a000 -> 00000000:06608000
  get Phys(data[n=12+1000]=f757b000)
AtapiVirtToPhysAddr_: f757b000 -> 00000000:06601000
  get Phys(data[n=13+1000]=f757c000)
AtapiVirtToPhysAddr_: f757c000 -> 00000000:06602000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x169c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x169c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 171c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 171c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f757c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f757c020)
AtapiVirtToPhysAddr_: f757c020 -> 00000000:06602020
  get Phys(data[n=1+fe0]=f757d000)
AtapiVirtToPhysAddr_: f757d000 -> 00000000:0661b000
  get Phys(data[n=2+1000]=f757e000)
AtapiVirtToPhysAddr_: f757e000 -> 00000000:0661c000
  get Phys(data[n=2+2000]=f757f000)
AtapiVirtToPhysAddr_: f757f000 -> 00000000:065fd000
  get Phys(data[n=3+1000]=f7580000)
AtapiVirtToPhysAddr_: f7580000 -> 00000000:06616000
  get Phys(data[n=4+1000]=f7581000)
AtapiVirtToPhysAddr_: f7581000 -> 00000000:06607000
  get Phys(data[n=5+1000]=f7582000)
AtapiVirtToPhysAddr_: f7582000 -> 00000000:06610000
  get Phys(data[n=6+1000]=f7583000)
AtapiVirtToPhysAddr_: f7583000 -> 00000000:06609000
  get Phys(data[n=7+1000]=f7584000)
AtapiVirtToPhysAddr_: f7584000 -> 00000000:0660a000
  get Phys(data[n=7+2000]=f7585000)
AtapiVirtToPhysAddr_: f7585000 -> 00000000:06623000
  get Phys(data[n=8+1000]=f7586000)
AtapiVirtToPhysAddr_: f7586000 -> 00000000:06624000
  get Phys(data[n=8+2000]=f7587000)
AtapiVirtToPhysAddr_: f7587000 -> 00000000:06605000
  get Phys(data[n=9+1000]=f7588000)
AtapiVirtToPhysAddr_: f7588000 -> 00000000:0661e000
  get Phys(data[n=10+1000]=f7589000)
AtapiVirtToPhysAddr_: f7589000 -> 00000000:0660f000
  get Phys(data[n=11+1000]=f758a000)
AtapiVirtToPhysAddr_: f758a000 -> 00000000:06618000
  get Phys(data[n=12+1000]=f758b000)
AtapiVirtToPhysAddr_: f758b000 -> 00000000:06611000
  get Phys(data[n=13+1000]=f758c000)
AtapiVirtToPhysAddr_: f758c000 -> 00000000:06612000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x171c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x171c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 179c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 179c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f758c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f758c020)
AtapiVirtToPhysAddr_: f758c020 -> 00000000:06612020
  get Phys(data[n=1+fe0]=f758d000)
AtapiVirtToPhysAddr_: f758d000 -> 00000000:0662b000
  get Phys(data[n=2+1000]=f758e000)
AtapiVirtToPhysAddr_: f758e000 -> 00000000:0662c000
  get Phys(data[n=2+2000]=f758f000)
AtapiVirtToPhysAddr_: f758f000 -> 00000000:0660d000
  get Phys(data[n=3+1000]=f7590000)
AtapiVirtToPhysAddr_: f7590000 -> 00000000:06626000
  get Phys(data[n=4+1000]=f7591000)
AtapiVirtToPhysAddr_: f7591000 -> 00000000:06617000
  get Phys(data[n=5+1000]=f7592000)
AtapiVirtToPhysAddr_: f7592000 -> 00000000:06620000
  get Phys(data[n=6+1000]=f7593000)
AtapiVirtToPhysAddr_: f7593000 -> 00000000:06619000
  get Phys(data[n=7+1000]=f7594000)
AtapiVirtToPhysAddr_: f7594000 -> 00000000:0661a000
  get Phys(data[n=7+2000]=f7595000)
AtapiVirtToPhysAddr_: f7595000 -> 00000000:06633000
  get Phys(data[n=8+1000]=f7596000)
AtapiVirtToPhysAddr_: f7596000 -> 00000000:06634000
  get Phys(data[n=8+2000]=f7597000)
AtapiVirtToPhysAddr_: f7597000 -> 00000000:06615000
  get Phys(data[n=9+1000]=f7598000)
AtapiVirtToPhysAddr_: f7598000 -> 00000000:0662e000
  get Phys(data[n=10+1000]=f7599000)
AtapiVirtToPhysAddr_: f7599000 -> 00000000:0661f000
  get Phys(data[n=11+1000]=f759a000)
AtapiVirtToPhysAddr_: f759a000 -> 00000000:06628000
  get Phys(data[n=12+1000]=f759b000)
AtapiVirtToPhysAddr_: f759b000 -> 00000000:06621000
  get Phys(data[n=13+1000]=f759c000)
AtapiVirtToPhysAddr_: f759c000 -> 00000000:06622000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x179c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x179c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 181c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 181c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f759c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f759c020)
AtapiVirtToPhysAddr_: f759c020 -> 00000000:06622020
  get Phys(data[n=1+fe0]=f759d000)
AtapiVirtToPhysAddr_: f759d000 -> 00000000:0663b000
  get Phys(data[n=2+1000]=f759e000)
AtapiVirtToPhysAddr_: f759e000 -> 00000000:0663c000
  get Phys(data[n=2+2000]=f759f000)
AtapiVirtToPhysAddr_: f759f000 -> 00000000:0661d000
  get Phys(data[n=3+1000]=f75a0000)
AtapiVirtToPhysAddr_: f75a0000 -> 00000000:06636000
  get Phys(data[n=4+1000]=f75a1000)
AtapiVirtToPhysAddr_: f75a1000 -> 00000000:06627000
  get Phys(data[n=5+1000]=f75a2000)
AtapiVirtToPhysAddr_: f75a2000 -> 00000000:06630000
  get Phys(data[n=6+1000]=f75a3000)
AtapiVirtToPhysAddr_: f75a3000 -> 00000000:06629000
  get Phys(data[n=7+1000]=f75a4000)
AtapiVirtToPhysAddr_: f75a4000 -> 00000000:0662a000
  get Phys(data[n=7+2000]=f75a5000)
AtapiVirtToPhysAddr_: f75a5000 -> 00000000:06643000
  get Phys(data[n=8+1000]=f75a6000)
AtapiVirtToPhysAddr_: f75a6000 -> 00000000:06644000
  get Phys(data[n=8+2000]=f75a7000)
AtapiVirtToPhysAddr_: f75a7000 -> 00000000:06625000
  get Phys(data[n=9+1000]=f75a8000)
AtapiVirtToPhysAddr_: f75a8000 -> 00000000:0663e000
  get Phys(data[n=10+1000]=f75a9000)
AtapiVirtToPhysAddr_: f75a9000 -> 00000000:0662f000
  get Phys(data[n=11+1000]=f75aa000)
AtapiVirtToPhysAddr_: f75aa000 -> 00000000:06638000
  get Phys(data[n=12+1000]=f75ab000)
AtapiVirtToPhysAddr_: f75ab000 -> 00000000:06631000
  get Phys(data[n=13+1000]=f75ac000)
AtapiVirtToPhysAddr_: f75ac000 -> 00000000:06632000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x181c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x181c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 189c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 189c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f75ac020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f75ac020)
AtapiVirtToPhysAddr_: f75ac020 -> 00000000:06632020
  get Phys(data[n=1+fe0]=f75ad000)
AtapiVirtToPhysAddr_: f75ad000 -> 00000000:0664b000
  get Phys(data[n=2+1000]=f75ae000)
AtapiVirtToPhysAddr_: f75ae000 -> 00000000:0664c000
  get Phys(data[n=2+2000]=f75af000)
AtapiVirtToPhysAddr_: f75af000 -> 00000000:0662d000
  get Phys(data[n=3+1000]=f75b0000)
AtapiVirtToPhysAddr_: f75b0000 -> 00000000:06646000
  get Phys(data[n=4+1000]=f75b1000)
AtapiVirtToPhysAddr_: f75b1000 -> 00000000:06637000
  get Phys(data[n=5+1000]=f75b2000)
AtapiVirtToPhysAddr_: f75b2000 -> 00000000:06640000
  get Phys(data[n=6+1000]=f75b3000)
AtapiVirtToPhysAddr_: f75b3000 -> 00000000:06639000
  get Phys(data[n=7+1000]=f75b4000)
AtapiVirtToPhysAddr_: f75b4000 -> 00000000:0663a000
  get Phys(data[n=7+2000]=f75b5000)
AtapiVirtToPhysAddr_: f75b5000 -> 00000000:06653000
  get Phys(data[n=8+1000]=f75b6000)
AtapiVirtToPhysAddr_: f75b6000 -> 00000000:06654000
  get Phys(data[n=8+2000]=f75b7000)
AtapiVirtToPhysAddr_: f75b7000 -> 00000000:06635000
  get Phys(data[n=9+1000]=f75b8000)
AtapiVirtToPhysAddr_: f75b8000 -> 00000000:0664e000
  get Phys(data[n=10+1000]=f75b9000)
AtapiVirtToPhysAddr_: f75b9000 -> 00000000:0663f000
  get Phys(data[n=11+1000]=f75ba000)
AtapiVirtToPhysAddr_: f75ba000 -> 00000000:06648000
  get Phys(data[n=12+1000]=f75bb000)
AtapiVirtToPhysAddr_: f75bb000 -> 00000000:06641000
  get Phys(data[n=13+1000]=f75bc000)
AtapiVirtToPhysAddr_: f75bc000 -> 00000000:06642000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x189c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x189c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 191c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 191c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f75bc020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f75bc020)
AtapiVirtToPhysAddr_: f75bc020 -> 00000000:06642020
  get Phys(data[n=1+fe0]=f75bd000)
AtapiVirtToPhysAddr_: f75bd000 -> 00000000:0665b000
  get Phys(data[n=2+1000]=f75be000)
AtapiVirtToPhysAddr_: f75be000 -> 00000000:0665c000
  get Phys(data[n=2+2000]=f75bf000)
AtapiVirtToPhysAddr_: f75bf000 -> 00000000:0663d000
  get Phys(data[n=3+1000]=f75c0000)
AtapiVirtToPhysAddr_: f75c0000 -> 00000000:06656000
  get Phys(data[n=4+1000]=f75c1000)
AtapiVirtToPhysAddr_: f75c1000 -> 00000000:06647000
  get Phys(data[n=5+1000]=f75c2000)
AtapiVirtToPhysAddr_: f75c2000 -> 00000000:06650000
  get Phys(data[n=6+1000]=f75c3000)
AtapiVirtToPhysAddr_: f75c3000 -> 00000000:06649000
  get Phys(data[n=7+1000]=f75c4000)
AtapiVirtToPhysAddr_: f75c4000 -> 00000000:0664a000
  get Phys(data[n=7+2000]=f75c5000)
AtapiVirtToPhysAddr_: f75c5000 -> 00000000:06663000
  get Phys(data[n=8+1000]=f75c6000)
AtapiVirtToPhysAddr_: f75c6000 -> 00000000:06664000
  get Phys(data[n=8+2000]=f75c7000)
AtapiVirtToPhysAddr_: f75c7000 -> 00000000:06645000
  get Phys(data[n=9+1000]=f75c8000)
AtapiVirtToPhysAddr_: f75c8000 -> 00000000:0665e000
  get Phys(data[n=10+1000]=f75c9000)
AtapiVirtToPhysAddr_: f75c9000 -> 00000000:0664f000
  get Phys(data[n=11+1000]=f75ca000)
AtapiVirtToPhysAddr_: f75ca000 -> 00000000:06658000
  get Phys(data[n=12+1000]=f75cb000)
AtapiVirtToPhysAddr_: f75cb000 -> 00000000:06651000
  get Phys(data[n=13+1000]=f75cc000)
AtapiVirtToPhysAddr_: f75cc000 -> 00000000:06652000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x191c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x191c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 199c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 199c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f75cc020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f75cc020)
AtapiVirtToPhysAddr_: f75cc020 -> 00000000:06652020
  get Phys(data[n=1+fe0]=f75cd000)
AtapiVirtToPhysAddr_: f75cd000 -> 00000000:0666b000
  get Phys(data[n=2+1000]=f75ce000)
AtapiVirtToPhysAddr_: f75ce000 -> 00000000:0666c000
  get Phys(data[n=2+2000]=f75cf000)
AtapiVirtToPhysAddr_: f75cf000 -> 00000000:0664d000
  get Phys(data[n=3+1000]=f75d0000)
AtapiVirtToPhysAddr_: f75d0000 -> 00000000:06666000
  get Phys(data[n=4+1000]=f75d1000)
AtapiVirtToPhysAddr_: f75d1000 -> 00000000:06657000
  get Phys(data[n=5+1000]=f75d2000)
AtapiVirtToPhysAddr_: f75d2000 -> 00000000:06660000
  get Phys(data[n=6+1000]=f75d3000)
AtapiVirtToPhysAddr_: f75d3000 -> 00000000:06659000
  get Phys(data[n=7+1000]=f75d4000)
AtapiVirtToPhysAddr_: f75d4000 -> 00000000:0665a000
  get Phys(data[n=7+2000]=f75d5000)
AtapiVirtToPhysAddr_: f75d5000 -> 00000000:06673000
  get Phys(data[n=8+1000]=f75d6000)
AtapiVirtToPhysAddr_: f75d6000 -> 00000000:06674000
  get Phys(data[n=8+2000]=f75d7000)
AtapiVirtToPhysAddr_: f75d7000 -> 00000000:06655000
  get Phys(data[n=9+1000]=f75d8000)
AtapiVirtToPhysAddr_: f75d8000 -> 00000000:0666e000
  get Phys(data[n=10+1000]=f75d9000)
AtapiVirtToPhysAddr_: f75d9000 -> 00000000:0665f000
  get Phys(data[n=11+1000]=f75da000)
AtapiVirtToPhysAddr_: f75da000 -> 00000000:06668000
  get Phys(data[n=12+1000]=f75db000)
AtapiVirtToPhysAddr_: f75db000 -> 00000000:06661000
  get Phys(data[n=13+1000]=f75dc000)
AtapiVirtToPhysAddr_: f75dc000 -> 00000000:06662000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x199c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x199c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1a1c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 1a1c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f75dc020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f75dc020)
AtapiVirtToPhysAddr_: f75dc020 -> 00000000:06662020
  get Phys(data[n=1+fe0]=f75dd000)
AtapiVirtToPhysAddr_: f75dd000 -> 00000000:0667b000
  get Phys(data[n=2+1000]=f75de000)
AtapiVirtToPhysAddr_: f75de000 -> 00000000:0667c000
  get Phys(data[n=2+2000]=f75df000)
AtapiVirtToPhysAddr_: f75df000 -> 00000000:0665d000
  get Phys(data[n=3+1000]=f75e0000)
AtapiVirtToPhysAddr_: f75e0000 -> 00000000:06676000
  get Phys(data[n=4+1000]=f75e1000)
AtapiVirtToPhysAddr_: f75e1000 -> 00000000:06667000
  get Phys(data[n=5+1000]=f75e2000)
AtapiVirtToPhysAddr_: f75e2000 -> 00000000:06670000
  get Phys(data[n=6+1000]=f75e3000)
AtapiVirtToPhysAddr_: f75e3000 -> 00000000:06669000
  get Phys(data[n=7+1000]=f75e4000)
AtapiVirtToPhysAddr_: f75e4000 -> 00000000:0666a000
  get Phys(data[n=7+2000]=f75e5000)
AtapiVirtToPhysAddr_: f75e5000 -> 00000000:06683000
  get Phys(data[n=8+1000]=f75e6000)
AtapiVirtToPhysAddr_: f75e6000 -> 00000000:06684000
  get Phys(data[n=8+2000]=f75e7000)
AtapiVirtToPhysAddr_: f75e7000 -> 00000000:06665000
  get Phys(data[n=9+1000]=f75e8000)
AtapiVirtToPhysAddr_: f75e8000 -> 00000000:0667e000
  get Phys(data[n=10+1000]=f75e9000)
AtapiVirtToPhysAddr_: f75e9000 -> 00000000:0666f000
  get Phys(data[n=11+1000]=f75ea000)
AtapiVirtToPhysAddr_: f75ea000 -> 00000000:06678000
  get Phys(data[n=12+1000]=f75eb000)
AtapiVirtToPhysAddr_: f75eb000 -> 00000000:06671000
  get Phys(data[n=13+1000]=f75ec000)
AtapiVirtToPhysAddr_: f75ec000 -> 00000000:06672000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1a1c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1a1c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1a9c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 1a9c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f75ec020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f75ec020)
AtapiVirtToPhysAddr_: f75ec020 -> 00000000:06672020
  get Phys(data[n=1+fe0]=f75ed000)
AtapiVirtToPhysAddr_: f75ed000 -> 00000000:0668b000
  get Phys(data[n=2+1000]=f75ee000)
AtapiVirtToPhysAddr_: f75ee000 -> 00000000:0668c000
  get Phys(data[n=2+2000]=f75ef000)
AtapiVirtToPhysAddr_: f75ef000 -> 00000000:0666d000
  get Phys(data[n=3+1000]=f75f0000)
AtapiVirtToPhysAddr_: f75f0000 -> 00000000:06686000
  get Phys(data[n=4+1000]=f75f1000)
AtapiVirtToPhysAddr_: f75f1000 -> 00000000:06677000
  get Phys(data[n=5+1000]=f75f2000)
AtapiVirtToPhysAddr_: f75f2000 -> 00000000:06680000
  get Phys(data[n=6+1000]=f75f3000)
AtapiVirtToPhysAddr_: f75f3000 -> 00000000:06679000
  get Phys(data[n=7+1000]=f75f4000)
AtapiVirtToPhysAddr_: f75f4000 -> 00000000:0667a000
  get Phys(data[n=7+2000]=f75f5000)
AtapiVirtToPhysAddr_: f75f5000 -> 00000000:06693000
  get Phys(data[n=8+1000]=f75f6000)
AtapiVirtToPhysAddr_: f75f6000 -> 00000000:06694000
  get Phys(data[n=8+2000]=f75f7000)
AtapiVirtToPhysAddr_: f75f7000 -> 00000000:06675000
  get Phys(data[n=9+1000]=f75f8000)
AtapiVirtToPhysAddr_: f75f8000 -> 00000000:0668e000
  get Phys(data[n=10+1000]=f75f9000)
AtapiVirtToPhysAddr_: f75f9000 -> 00000000:0667f000
  get Phys(data[n=11+1000]=f75fa000)
AtapiVirtToPhysAddr_: f75fa000 -> 00000000:06688000
  get Phys(data[n=12+1000]=f75fb000)
AtapiVirtToPhysAddr_: f75fb000 -> 00000000:06681000
  get Phys(data[n=13+1000]=f75fc000)
AtapiVirtToPhysAddr_: f75fc000 -> 00000000:06682000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1a9c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1a9c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1b1c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 1b1c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f75fc020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f75fc020)
AtapiVirtToPhysAddr_: f75fc020 -> 00000000:06682020
  get Phys(data[n=1+fe0]=f75fd000)
AtapiVirtToPhysAddr_: f75fd000 -> 00000000:0669b000
  get Phys(data[n=2+1000]=f75fe000)
AtapiVirtToPhysAddr_: f75fe000 -> 00000000:0669c000
  get Phys(data[n=2+2000]=f75ff000)
AtapiVirtToPhysAddr_: f75ff000 -> 00000000:0667d000
  get Phys(data[n=3+1000]=f7600000)
AtapiVirtToPhysAddr_: f7600000 -> 00000000:06696000
  get Phys(data[n=4+1000]=f7601000)
AtapiVirtToPhysAddr_: f7601000 -> 00000000:06687000
  get Phys(data[n=5+1000]=f7602000)
AtapiVirtToPhysAddr_: f7602000 -> 00000000:06690000
  get Phys(data[n=6+1000]=f7603000)
AtapiVirtToPhysAddr_: f7603000 -> 00000000:06689000
  get Phys(data[n=7+1000]=f7604000)
AtapiVirtToPhysAddr_: f7604000 -> 00000000:0668a000
  get Phys(data[n=7+2000]=f7605000)
AtapiVirtToPhysAddr_: f7605000 -> 00000000:066a3000
  get Phys(data[n=8+1000]=f7606000)
AtapiVirtToPhysAddr_: f7606000 -> 00000000:066a4000
  get Phys(data[n=8+2000]=f7607000)
AtapiVirtToPhysAddr_: f7607000 -> 00000000:06685000
  get Phys(data[n=9+1000]=f7608000)
AtapiVirtToPhysAddr_: f7608000 -> 00000000:0669e000
  get Phys(data[n=10+1000]=f7609000)
AtapiVirtToPhysAddr_: f7609000 -> 00000000:0668f000
  get Phys(data[n=11+1000]=f760a000)
AtapiVirtToPhysAddr_: f760a000 -> 00000000:06698000
  get Phys(data[n=12+1000]=f760b000)
AtapiVirtToPhysAddr_: f760b000 -> 00000000:06691000
  get Phys(data[n=13+1000]=f760c000)
AtapiVirtToPhysAddr_: f760c000 -> 00000000:06692000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1b1c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1b1c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1b9c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 1b9c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f760c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f760c020)
AtapiVirtToPhysAddr_: f760c020 -> 00000000:06692020
  get Phys(data[n=1+fe0]=f760d000)
AtapiVirtToPhysAddr_: f760d000 -> 00000000:066ab000
  get Phys(data[n=2+1000]=f760e000)
AtapiVirtToPhysAddr_: f760e000 -> 00000000:066ac000
  get Phys(data[n=2+2000]=f760f000)
AtapiVirtToPhysAddr_: f760f000 -> 00000000:0668d000
  get Phys(data[n=3+1000]=f7610000)
AtapiVirtToPhysAddr_: f7610000 -> 00000000:066a6000
  get Phys(data[n=4+1000]=f7611000)
AtapiVirtToPhysAddr_: f7611000 -> 00000000:06697000
  get Phys(data[n=5+1000]=f7612000)
AtapiVirtToPhysAddr_: f7612000 -> 00000000:066a0000
  get Phys(data[n=6+1000]=f7613000)
AtapiVirtToPhysAddr_: f7613000 -> 00000000:06699000
  get Phys(data[n=7+1000]=f7614000)
AtapiVirtToPhysAddr_: f7614000 -> 00000000:0669a000
  get Phys(data[n=7+2000]=f7615000)
AtapiVirtToPhysAddr_: f7615000 -> 00000000:066b3000
  get Phys(data[n=8+1000]=f7616000)
AtapiVirtToPhysAddr_: f7616000 -> 00000000:066b4000
  get Phys(data[n=8+2000]=f7617000)
AtapiVirtToPhysAddr_: f7617000 -> 00000000:06695000
  get Phys(data[n=9+1000]=f7618000)
AtapiVirtToPhysAddr_: f7618000 -> 00000000:066ae000
  get Phys(data[n=10+1000]=f7619000)
AtapiVirtToPhysAddr_: f7619000 -> 00000000:0669f000
  get Phys(data[n=11+1000]=f761a000)
AtapiVirtToPhysAddr_: f761a000 -> 00000000:066a8000
  get Phys(data[n=12+1000]=f761b000)
AtapiVirtToPhysAddr_: f761b000 -> 00000000:066a1000
  get Phys(data[n=13+1000]=f761c000)
AtapiVirtToPhysAddr_: f761c000 -> 00000000:066a2000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1b9c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1b9c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1c1c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 1c1c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f761c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f761c020)
AtapiVirtToPhysAddr_: f761c020 -> 00000000:066a2020
  get Phys(data[n=1+fe0]=f761d000)
AtapiVirtToPhysAddr_: f761d000 -> 00000000:066bb000
  get Phys(data[n=2+1000]=f761e000)
AtapiVirtToPhysAddr_: f761e000 -> 00000000:066bc000
  get Phys(data[n=2+2000]=f761f000)
AtapiVirtToPhysAddr_: f761f000 -> 00000000:0669d000
  get Phys(data[n=3+1000]=f7620000)
AtapiVirtToPhysAddr_: f7620000 -> 00000000:066b6000
  get Phys(data[n=4+1000]=f7621000)
AtapiVirtToPhysAddr_: f7621000 -> 00000000:066a7000
  get Phys(data[n=5+1000]=f7622000)
AtapiVirtToPhysAddr_: f7622000 -> 00000000:066b0000
  get Phys(data[n=6+1000]=f7623000)
AtapiVirtToPhysAddr_: f7623000 -> 00000000:066a9000
  get Phys(data[n=7+1000]=f7624000)
AtapiVirtToPhysAddr_: f7624000 -> 00000000:066aa000
  get Phys(data[n=7+2000]=f7625000)
AtapiVirtToPhysAddr_: f7625000 -> 00000000:066c3000
  get Phys(data[n=8+1000]=f7626000)
AtapiVirtToPhysAddr_: f7626000 -> 00000000:066c4000
  get Phys(data[n=8+2000]=f7627000)
AtapiVirtToPhysAddr_: f7627000 -> 00000000:066a5000
  get Phys(data[n=9+1000]=f7628000)
AtapiVirtToPhysAddr_: f7628000 -> 00000000:066be000
  get Phys(data[n=10+1000]=f7629000)
AtapiVirtToPhysAddr_: f7629000 -> 00000000:066af000
  get Phys(data[n=11+1000]=f762a000)
AtapiVirtToPhysAddr_: f762a000 -> 00000000:066b8000
  get Phys(data[n=12+1000]=f762b000)
AtapiVirtToPhysAddr_: f762b000 -> 00000000:066b1000
  get Phys(data[n=13+1000]=f762c000)
AtapiVirtToPhysAddr_: f762c000 -> 00000000:066b2000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1c1c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1c1c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1c9c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 1c9c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f762c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f762c020)
AtapiVirtToPhysAddr_: f762c020 -> 00000000:066b2020
  get Phys(data[n=1+fe0]=f762d000)
AtapiVirtToPhysAddr_: f762d000 -> 00000000:066cb000
  get Phys(data[n=2+1000]=f762e000)
AtapiVirtToPhysAddr_: f762e000 -> 00000000:066cc000
  get Phys(data[n=2+2000]=f762f000)
AtapiVirtToPhysAddr_: f762f000 -> 00000000:066ad000
  get Phys(data[n=3+1000]=f7630000)
AtapiVirtToPhysAddr_: f7630000 -> 00000000:066c6000
  get Phys(data[n=4+1000]=f7631000)
AtapiVirtToPhysAddr_: f7631000 -> 00000000:066b7000
  get Phys(data[n=5+1000]=f7632000)
AtapiVirtToPhysAddr_: f7632000 -> 00000000:066c0000
  get Phys(data[n=6+1000]=f7633000)
AtapiVirtToPhysAddr_: f7633000 -> 00000000:066b9000
  get Phys(data[n=7+1000]=f7634000)
AtapiVirtToPhysAddr_: f7634000 -> 00000000:066ba000
  get Phys(data[n=7+2000]=f7635000)
AtapiVirtToPhysAddr_: f7635000 -> 00000000:066d3000
  get Phys(data[n=8+1000]=f7636000)
AtapiVirtToPhysAddr_: f7636000 -> 00000000:066d4000
  get Phys(data[n=8+2000]=f7637000)
AtapiVirtToPhysAddr_: f7637000 -> 00000000:066b5000
  get Phys(data[n=9+1000]=f7638000)
AtapiVirtToPhysAddr_: f7638000 -> 00000000:066ce000
  get Phys(data[n=10+1000]=f7639000)
AtapiVirtToPhysAddr_: f7639000 -> 00000000:066bf000
  get Phys(data[n=11+1000]=f763a000)
AtapiVirtToPhysAddr_: f763a000 -> 00000000:066c8000
  get Phys(data[n=12+1000]=f763b000)
AtapiVirtToPhysAddr_: f763b000 -> 00000000:066c1000
  get Phys(data[n=13+1000]=f763c000)
AtapiVirtToPhysAddr_: f763c000 -> 00000000:066c2000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1c9c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1c9c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1d1c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 1d1c, Number of WORDS 0x8000, DevSize 0x80
AtapiDmaSetup: mode 0x44, data f763c020, count 10000, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f763c020)
AtapiVirtToPhysAddr_: f763c020 -> 00000000:066c2020
  get Phys(data[n=1+fe0]=f763d000)
AtapiVirtToPhysAddr_: f763d000 -> 00000000:066db000
  get Phys(data[n=2+1000]=f763e000)
AtapiVirtToPhysAddr_: f763e000 -> 00000000:066dc000
  get Phys(data[n=2+2000]=f763f000)
AtapiVirtToPhysAddr_: f763f000 -> 00000000:066bd000
  get Phys(data[n=3+1000]=f7640000)
AtapiVirtToPhysAddr_: f7640000 -> 00000000:066d6000
  get Phys(data[n=4+1000]=f7641000)
AtapiVirtToPhysAddr_: f7641000 -> 00000000:066c7000
  get Phys(data[n=5+1000]=f7642000)
AtapiVirtToPhysAddr_: f7642000 -> 00000000:066d0000
  get Phys(data[n=6+1000]=f7643000)
AtapiVirtToPhysAddr_: f7643000 -> 00000000:066c9000
  get Phys(data[n=7+1000]=f7644000)
AtapiVirtToPhysAddr_: f7644000 -> 00000000:066ca000
  get Phys(data[n=7+2000]=f7645000)
AtapiVirtToPhysAddr_: f7645000 -> 00000000:066e3000
  get Phys(data[n=8+1000]=f7646000)
AtapiVirtToPhysAddr_: f7646000 -> 00000000:066e4000
  get Phys(data[n=8+2000]=f7647000)
AtapiVirtToPhysAddr_: f7647000 -> 00000000:066c5000
  get Phys(data[n=9+1000]=f7648000)
AtapiVirtToPhysAddr_: f7648000 -> 00000000:066de000
  get Phys(data[n=10+1000]=f7649000)
AtapiVirtToPhysAddr_: f7649000 -> 00000000:066cf000
  get Phys(data[n=11+1000]=f764a000)
AtapiVirtToPhysAddr_: f764a000 -> 00000000:066d8000
  get Phys(data[n=12+1000]=f764b000)
AtapiVirtToPhysAddr_: f764b000 -> 00000000:066d1000
  get Phys(data[n=13+1000]=f764c000)
AtapiVirtToPhysAddr_: f764c000 -> 00000000:066d2000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1d1c, Count 0x80(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1d1c count 0x80 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3914
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1d9c, OrigWordsRequested 0x3d00, DevSize 0x3d
IdeReadWrite (REQ): Starting sector is 1d9c, Number of WORDS 0x3d00, DevSize 0x3d
AtapiDmaSetup: mode 0x44, data f764c020, count 7a00, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f764c020)
AtapiVirtToPhysAddr_: f764c020 -> 00000000:066d2020
  get Phys(data[n=1+fe0]=f764d000)
AtapiVirtToPhysAddr_: f764d000 -> 00000000:066eb000
  get Phys(data[n=2+1000]=f764e000)
AtapiVirtToPhysAddr_: f764e000 -> 00000000:066ec000
  get Phys(data[n=2+2000]=f764f000)
AtapiVirtToPhysAddr_: f764f000 -> 00000000:066cd000
  get Phys(data[n=3+1000]=f7650000)
AtapiVirtToPhysAddr_: f7650000 -> 00000000:066e6000
  get Phys(data[n=4+1000]=f7651000)
AtapiVirtToPhysAddr_: f7651000 -> 00000000:066d7000
  get Phys(data[n=5+1000]=f7652000)
AtapiVirtToPhysAddr_: f7652000 -> 00000000:066e0000
  get Phys(data[n=6+1000]=f7653000)
AtapiVirtToPhysAddr_: f7653000 -> 00000000:066d9000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1d9c, Count 0x3d(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1d9c count 0x3d feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 7a00, full size 7a00
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dd9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dd9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f7685540, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f7685540)
AtapiVirtToPhysAddr_: f7685540 -> 00000000:00ee0540
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dd9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dd9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dd9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dd9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dd9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dd9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dd9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dd9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dd9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dd9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dd9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dd9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dd9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dd9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dd9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dd9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dd9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dd9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dd9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dd9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dd9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dd9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dd9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dd9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dd9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dd9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dd9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dd9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dd9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dd9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dd9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dd9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dd9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dd9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dd9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dd9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dd9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dd9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dd9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dd9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dd9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dd9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dd9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dd9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dd9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dd9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dd9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dd9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dd9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dd9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dd9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dd9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dd9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dd9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dd9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dd9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dd9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dd9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dd9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dd9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dd9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dd9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dda, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dda, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dda, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dda count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dda, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dda, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dda, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dda count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dda, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dda, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dda, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dda count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dda, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dda, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dda, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dda count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dda, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dda, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dda, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dda count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dda, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dda, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dda, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dda count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dda, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dda, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dda, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dda count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dda, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dda, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dda, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dda count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dda, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dda, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dda, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dda count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dda, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dda, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dda, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dda count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dda, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dda, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dda, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dda count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dda, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dda, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dda, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dda count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dda, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dda, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dda, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dda count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dda, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dda, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dda, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dda count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dda, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dda, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dda, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dda count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dda, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dda, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dda, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dda count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddc, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddc, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddc count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddc, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddc, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddc count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddc, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddc, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddc count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddc, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddc, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddc count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddc, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddc, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddc count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddc, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddc, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddc count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddc, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddc, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddc count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddc, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddc, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddc count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddc, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddc, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddc count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddc, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddc, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddc count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddc, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddc, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddc count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddc, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddc, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddc count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddc, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddc, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddc count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddc, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddc, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddc count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddc, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddc, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddc count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddc, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddc, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddc count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddd, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddd, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddd count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddd, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddd, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddd count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddd, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddd, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddd count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddd, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddd, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddd count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddd, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddd, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddd count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddd, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddd, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddd count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddd, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddd, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddd count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddd, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddd, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddd count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddd, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddd, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddd count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddd, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddd, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddd count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddd, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddd, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddd count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddd, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddd, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddd count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddd, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddd, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddd count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddd, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddd, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddd count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddd, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddd, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddd count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddd, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddd, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddd count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dde, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dde, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dde, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dde count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dde, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dde, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dde, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dde count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dde, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dde, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dde, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dde count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dde, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dde, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dde, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dde count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dde, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dde, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dde, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dde count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dde, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dde, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dde, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dde count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dde, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dde, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dde, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dde count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dde, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dde, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dde, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dde count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dde, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dde, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dde, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dde count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dde, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dde, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dde, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dde count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dde, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dde, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dde, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dde count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dde, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dde, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dde, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dde count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dde, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dde, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dde, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dde count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dde, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dde, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dde, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dde count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dde, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dde, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dde, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dde count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dde, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dde, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dde, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dde count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddf, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddf, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddf count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddf, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddf, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddf count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddf, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddf, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddf count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddf, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddf, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddf count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddf, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddf, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddf count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddf, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddf, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddf count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddf, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddf, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddf count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddf, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddf, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddf count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddf, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddf, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddf count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddf, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddf, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddf count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddf, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddf, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddf count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddf, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddf, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddf count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddf, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddf, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddf count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddf, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddf, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddf count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddf, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddf, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddf count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ddf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ddf, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ddf, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ddf count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1de9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1de9, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1de9, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1de9 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dea, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dea, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dea, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dea count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dea, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dea, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dea, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dea count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dea, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dea, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dea, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dea count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dea, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dea, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dea, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dea count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dea, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dea, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dea, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dea count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dea, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dea, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dea, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dea count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dea, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dea, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dea, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dea count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dea, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dea, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dea, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dea count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dea, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dea, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dea, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dea count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dea, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dea, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dea, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dea count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dea, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dea, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dea, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dea count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dea, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dea, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dea, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dea count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dea, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dea, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dea, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dea count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dea, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dea, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dea, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dea count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dea, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dea, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dea, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dea count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dea, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dea, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dea, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dea count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1deb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1deb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1deb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1deb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1deb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1deb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1deb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1deb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1deb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1deb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1deb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1deb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1deb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1deb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1deb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1deb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1deb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1deb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1deb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1deb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1deb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1deb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1deb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1deb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1deb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1deb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1deb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1deb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1deb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1deb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1deb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1deb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1deb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1deb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1deb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1deb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1deb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1deb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1deb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1deb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1deb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1deb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1deb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1deb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1deb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1deb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1deb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1deb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1deb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1deb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1deb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1deb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1deb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1deb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1deb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1deb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1deb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1deb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1deb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1deb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1deb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1deb, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1deb, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1deb count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dec, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dec, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dec, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dec count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dec, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dec, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dec, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dec count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dec, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dec, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dec, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dec count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dec, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dec, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dec, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dec count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dec, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dec, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dec, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dec count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dec, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dec, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dec, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dec count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dec, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dec, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dec, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dec count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dec, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dec, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dec, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dec count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dec, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dec, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dec, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dec count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dec, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dec, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dec, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dec count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dec, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dec, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dec, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dec count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dec, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dec, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dec, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dec count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dec, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dec, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dec, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dec count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dec, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dec, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dec, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dec count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dec, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dec, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dec, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dec count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dec, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dec, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dec, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dec count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ded, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ded, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ded, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ded count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ded, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ded, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ded, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ded count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ded, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ded, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ded, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ded count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ded, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ded, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ded, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ded count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ded, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ded, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ded, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ded count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ded, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ded, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ded, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ded count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ded, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ded, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ded, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ded count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ded, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ded, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ded, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ded count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ded, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ded, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ded, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ded count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ded, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ded, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ded, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ded count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ded, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ded, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ded, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ded count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ded, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ded, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ded, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ded count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ded, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ded, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ded, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ded count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ded, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ded, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ded, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ded count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ded, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ded, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ded, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ded count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1ded, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1ded, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1ded, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1ded count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dee, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dee, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dee, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dee count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dee, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dee, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dee, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dee count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dee, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dee, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dee, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dee count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dee, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dee, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dee, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dee count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dee, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dee, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dee, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dee count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dee, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dee, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dee, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dee count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dee, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dee, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dee, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dee count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dee, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dee, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dee, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dee count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dee, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dee, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dee, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dee count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dee, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dee, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dee, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dee count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dee, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dee, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dee, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dee count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dee, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dee, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dee, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dee count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dee, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dee, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dee, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dee count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dee, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dee, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dee, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dee count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dee, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dee, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dee, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dee count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1dee, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1dee, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1dee, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1dee count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1def, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1def, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1def, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1def count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1def, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1def, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1def, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1def count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1def, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1def, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1def, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1def count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1def, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1def, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1def, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1def count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1def, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1def, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1def, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1def count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1def, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1def, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1def, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1def count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1def, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1def, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1def, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1def count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1def, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1def, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1def, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1def count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1def, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1def, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1def, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1def count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1def, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1def, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1def, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1def count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1def, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1def, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1def, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1def count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1def, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1def, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1def, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1def count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1def, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1def, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1def, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1def count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1def, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1def, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1def, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1def count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1def, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1def, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1def, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1def count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1def, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1def, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1def, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1def count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df1, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df1, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df1 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df2, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df2, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df2 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df3, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df3, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df3 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df4, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df4, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df4 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df5, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df5, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df5 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df6, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df6, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df6 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df7, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df7, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df7 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1df8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 1df8, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f76855a0, count 200, lCh 0, dev 0
  get Phys(PRD=b23a8060)
AtapiVirtToPhysAddr_: b23a8060 -> 00000000:04ca7060
  get Phys(data[0]=f76855a0)
AtapiVirtToPhysAddr_: f76855a0 -> 00000000:00ee05a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1df8, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1df8 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b2383180
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x16, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2383180, status 1
AtapiInterrupt: RequestComplete, srb 0xb2383180
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb2383180, CDB 0xb23831b0, AtaReq 0xb23a8000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb2383180
TopLevel (3), AtaReq 0xb23a8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf76a3964
** Ide: Command AtaReq 0xb23a8000
** --