OnCreate(../ntoskrnl/kd/kdio.c:384) -----------------------------------------------------
(../ntoskrnl/kd/kdio.c:385) ReactOS 0.5-SVN (Build 20161121-r73323)
(../ntoskrnl/kd/kdio.c:387) 1 System Processor [1023 MB Memory]
(../ntoskrnl/kd/kdio.c:388) Command Line: NOGUIBOOT KDSERIAL DEBUGPORT=COM1 FIRSTCHANCE
(../ntoskrnl/kd/kdio.c:392) ARC Paths: multi(0)disk(0)cdrom(31) \ multi(0)disk(0)cdrom(31) \reactos\
(../ntoskrnl/ke/i386/cpu.c:450) Supported CPU features : KF_V86_VIS KF_RDTSC KF_CR4 KF_CMOV KF_GLOBAL_PAGE KF_LARGE_PAGE KF_MTRR KF_CMPXCHG8B KF_MMX KF_WORKING_PTE KF_PAT KF_FXSR KF_FAST_SYSCALL KF_XMMI       
(../ntoskrnl/ke/i386/cpu.c:722) Prefetch Cache: 32 bytesL2 Cache: 262144 bytesL2 Cache Line: 64 bytesL2 Cache Associativity: 8
(../ntoskrnl/mm/ARM3/mminit.c:1442) HAL I/O Mapping at FFFE0000 is unsafe
(../ntoskrnl/mm/mminit.c:134)           0x80000000 - 0x83000000Boot Loaded Image
(../ntoskrnl/mm/mminit.c:138)           0xB0000000 - 0xB0701000PFN Database
(../ntoskrnl/mm/mminit.c:142)           0xB0701000 - 0xB26B1000ARM3 Non Paged Pool
(../ntoskrnl/mm/mminit.c:146)           0xB9400000 - 0xBB400000System View Space
(../ntoskrnl/mm/mminit.c:150)           0xBB400000 - 0xC0000000Session Space
(../ntoskrnl/mm/mminit.c:153)           0xC0000000 - 0xC03FFFFFPage Tables
(../ntoskrnl/mm/mminit.c:156)           0xC0300000 - 0xC0300FFFPage Directories
(../ntoskrnl/mm/mminit.c:159)           0xC0400000 - 0xC07FFFFFHyperspace
(../ntoskrnl/mm/mminit.c:163)           0xE1000000 - 0xECC00000ARM3 Paged Pool
(../ntoskrnl/mm/mminit.c:166)           0xECC00000 - 0xF7BE0000System PTE Space
(../ntoskrnl/mm/mminit.c:169)           0xF7BE0000 - 0xFFBE0000Non Paged Pool Expansion PTE Space
(../ntoskrnl/config/cmsysini.c:513) CmpCreateHardwareProfile() done
(../ntoskrnl/config/cmhvlist.c:158) CmpAddToHiveFileList: Creation or opening of the hive list failed, status = c0000034
(../hal/halx86/legacy/bussupp.c:688) Your machine has a PCI-to-PCI or CardBUS Bridge. PCI devices may fail!
(../hal/halx86/legacy/bussupp.c:717) Found parent bus (indicating PCI Bridge). PCI devices may fail!

====== PCI BUS HARDWARE DETECTION =======

00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge [8086:7190] (rev 03)
Subsystem: Unknown [0000:0000]
Flags: bus master, medium devsel, latency 64
Memory at e4000000 (32-bit, prefetchable) [size=64M]

00:01.0 PCI bridge [0604]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge [8086:7191] (rev 03)
Subsystem: Unknown [0000:0000]
Flags: bus master, 66MHz, medium devsel, latency 64
Memory at 40010100 (32-bit, non-prefetchable) [size=256]
Memory at 22a0d0e0 (32-bit, non-prefetchable) [size=4K]
Memory at cfd0ce00 (32-bit, non-prefetchable) [size=512]
Memory at e3f0cff0 (32-bit, non-prefetchable) [size=256]

00:04.0 ISA bridge [0601]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] (rev 02)
Subsystem: Unknown [0000:0000]
Flags: bus master, medium devsel, latency 0

00:04.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01)
Subsystem: Unknown [0000:0000]
Flags: bus master, medium devsel, latency 32
I/O ports at d800 [size=2K]

00:04.2 USB controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB [8086:7112] (rev 01)
Subsystem: Unknown [0000:0000]
Flags: bus master, medium devsel, latency 32, IRQ 09
I/O ports at d400 [size=1K]
Device is using IRQ 9! ISA Cards using that IRQ may fail!
Device is an Intel UHCI (USB) Controller. Turn off Legacy USB in your BIOS!

00:04.3 Secondary bus towards host CPU [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 02)
Subsystem: Unknown [0000:0000]
Flags: medium devsel, latency 0

00:06.0 SCSI storage controller [0100]: Adaptec AHA-2940U2/U2W / 7890/7891 [9005:001f] (rev 00)
Subsystem: 2940U2W SCSI Controller [9005:000f]
Flags: bus master, medium devsel, latency 32, IRQ 09
I/O ports at d000 [size=4K]
Memory at cd800000 (64-bit, non-prefetchable) [size=8M]
Device is using IRQ 9! ISA Cards using that IRQ may fail!

00:0a.0 Mass storage controller [0180]: Promise Technology, Inc. PDC20262 (FastTrak66/Ultra66) [105a:4d38] (rev 01)
Subsystem: Ultra66 [105a:4d33]
Flags: bus master, medium devsel, latency 32, IRQ 09
I/O ports at b800 [size=2K]
I/O ports at b400 [size=1K]
I/O ports at b000 [size=4K]
I/O ports at a800 [size=2K]
I/O ports at a400 [size=1K]
Memory at cd000000 (32-bit, non-prefetchable) [size=16M]
Device is using IRQ 9! ISA Cards using that IRQ may fail!

00:0b.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M [Tornado] [10b7:9200] (rev 74)
Subsystem: 3C905CX-TX/TX-M Fast Etherlink for PC Management NIC [10b7:1000]
Flags: bus master, medium devsel, latency 32, IRQ 10
I/O ports at a000 [size=8K]
Memory at cc800000 (32-bit, non-prefetchable) [size=8M]
Device is using IRQ 10! ISA Cards using that IRQ may fail!

00:0c.0 Multimedia audio controller [0401]: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio Accelerator] [1013:6003] (rev 01)
Subsystem: DMX XFire 1024 [153b:112e]
Flags: bus master, slow devsel, latency 32, IRQ 11
Memory at cc000000 (32-bit, non-prefetchable) [size=64M]
Memory at cb800000 (32-bit, non-prefetchable) [size=8M]
Device is using IRQ 11! ISA Cards using that IRQ may fail!

01:00.0 VGA compatible controller [0300]: NVIDIA Corporation NV34 [GeForce FX 5500] [10de:0326] (rev a1)
Subsystem: Unknown [10b0:0403]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
Memory at ce000000 (32-bit, non-prefetchable) [size=32M]
Memory at d0000000 (32-bit, prefetchable) [size=256M]
Device is using IRQ 11! ISA Cards using that IRQ may fail!

====== PCI BUS DETECTION COMPLETE =======

PC Compatible Eisa/Isa HAL Detected
(../ntoskrnl/io/pnpmgr/pnpinit.c:62) WARNING!! In PiInitCacheGroupInformation, using ReactOS HACK for SETUPLDR!!
(../ntoskrnl/io/pnpmgr/pnpinit.c:455) Need to build DACL
(../ntoskrnl/io/pnpmgr/pnpmgr.c:3212) ZwOpenKey(\Registry\Machine\SYSTEM\CURRENTCONTROLSET\Control\Pnp) failed with status 0xc0000034
(../ntoskrnl/ps/apphelp.c:318) SHIMS: ApphelpCacheRead could not even open Session Manager\AppCompatCache (0xc0000034)
(../ntoskrnl/wmi/wmi.c:72) IoWMIRegistrationControl() called for DO B2680E18, requesting 1 action, returning success
(../sdk/lib/rtl/image.c:171) Invalid base address: 00000000
(../ntoskrnl/io/iomgr/driver.c:1648) '\Driver\sacdrv' initialization failed, status (0xc0000037)
(../ntoskrnl/io/iomgr/driver.c:64) Deleting driver object '\Driver\sacdrv'


ATAPI IDE MiniPort Driver (UniATA) v 0.46d7
 Parameter PrintLogo
 Parameter PrintLogo = 0x0
 Parameter IgnoreIsaCompatiblePci
 Parameter IgnoreIsaCompatiblePci = 0x0
 Parameter IgnoreNativePci
 Parameter IgnoreNativePci = 0x0
UniATA Init: OS should be ReactOS
UniATA Init: OS ver 4.1 (1), 1 CPU(s)
Performance calibration: dt=14995, counter=410475
InitBadBlocks general
InitBadBlocks returned: 0xc0000034
 Parameter SkipRaids
 Parameter SkipRaids = 0x1
 Parameter ForceSimplex
 Parameter ForceSimplex = 0x0
 Parameter LogToDisplay
 Parameter LogToDisplay = 0x0
HwInitializationDataSize = 50
set NeedPhysicalAddresses = TRUE
set AtapiAdapterControl() ptr


UniATA init... (0)
 Parameter VirtualMachineType
 Parameter VirtualMachineType = 0x0
 Parameter VirtualBox
 Parameter VirtualBox = 0x0

ATAPI IDE enum supported PCI BusMaster Devices
UniataEnumBusMasterController__: maxPciBus=16
  pass 0
DevId = 71908086 Class = 0006/0000, SubVen/Sys 0000/0000
DevId = 71918086 Class = 0006/0004, SubVen/Sys 0000/0000
DevId = 71108086 Class = 0006/0001, SubVen/Sys 0000/0000
DevId = 71118086 Class = 0001/0001, SubVen/Sys 0000/0000
-- BusID: 0x0:0x4:0x1
Storage Class
DevId = 71118086 Class = 0001/0001, ProgIf 80
 Parameter Include
 Parameter Include = 0x0
No force include, check exclude
 Parameter Exclude
 Parameter Exclude = 0x0
Default device
found, pass 0
InterruptPin = 0x0
InterruptLine = 0x0
Enabling Mem/Io spaces and busmastering...
Initial pciData.Command = 0x5
PCI_ENABLE_IO_SPACE
PCI_ENABLE_MEMORY_SPACE
New pciData.Command = 0x5
PCI_ENABLE_BUS_MASTER
InterruptLine = 0x0
Final pciData.Command = 0x5
Range 4 = 0xd801
count: BMListLen++
DevId = 71128086 Class = 000C/0003, SubVen/Sys 0000/0000
DevId = 71138086 Class = 0006/0080, SubVen/Sys 0000/0000
DevId = 001F9005 Class = 0001/0000, SubVen/Sys 9005/000f
-- BusID: 0x0:0x6:0x0
Storage Class
DevId = 001F9005 Class = 0001/0000, ProgIf 00
 Parameter Include
 Parameter Include = 0x0
No force include, check exclude
 Parameter Exclude
 Parameter Exclude = 0x0
unknown
Subclass not supported
Subclass not supported
DevId = 4D38105A Class = 0001/0080, SubVen/Sys 105a/4d33
-- BusID: 0x0:0xa:0x0
Storage Class
DevId = 4D38105A Class = 0001/0080, ProgIf 00
 Parameter Include
 Parameter Include = 0x0
No force include, check exclude
 Parameter Exclude
 Parameter Exclude = 0x0
Default device
found, pass 0
InterruptPin = 0x1
InterruptLine = 0x9
Enabling Mem/Io spaces and busmastering...
Initial pciData.Command = 0x7
PCI_ENABLE_IO_SPACE
PCI_ENABLE_MEMORY_SPACE
PCI_ENABLE_BUS_MASTER
InterruptLine = 0x9
Final pciData.Command = 0x7
Range 0 = 0xb801
Range 1 = 0xb401
Range 2 = 0xb001
Range 3 = 0xa801
Range 4 = 0xa401
Range 5 = 0xcd000000
count: BMListLen++
DevId = 920010B7 Class = 0002/0000, SubVen/Sys 10b7/1000
DevId = 60031013 Class = 0004/0001, SubVen/Sys 153b/112e
DevId = 032610DE Class = 0003/0000, SubVen/Sys 10b0/0403
  pass 1
DevId = 71118086 Class = 0001/0001, SubVen/Sys 0000/0000
-- BusID: 0x0:0x4:0x1
Storage Class
DevId = 71118086 Class = 0001/0001, ProgIf 80
 Parameter Include
 Parameter Include = 0x0
No force include, check exclude
 Parameter Exclude
 Parameter Exclude = 0x0
Default device
found, pass 1
InterruptPin = 0x0
InterruptLine = 0x0
Range 4 = 0xd801
found suitable device
 Parameter NativePCIMode
 Parameter NativePCIMode = 0x0
Add to BMList, AltInit 0
DevId = 4D38105A Class = 0001/0080, SubVen/Sys 105a/4d33
-- BusID: 0x0:0xa:0x0
Storage Class
DevId = 4D38105A Class = 0001/0080, ProgIf 00
 Parameter Include
 Parameter Include = 0x0
No force include, check exclude
 Parameter Exclude
 Parameter Exclude = 0x0
Default device
found, pass 1
InterruptPin = 0x1
InterruptLine = 0x9
Range 0 = 0xb801
Range 1 = 0xb401
Range 2 = 0xb001
Range 3 = 0xa801
Range 4 = 0xa401
Range 5 = 0xcd000000
found suitable device
  pass 2
DevId = 71118086 Class = 0001/0001, SubVen/Sys 0000/0000
-- BusID: 0x0:0x4:0x1
Storage Class
DevId = 71118086 Class = 0001/0001, ProgIf 80
 Parameter Include
 Parameter Include = 0x0
No force include, check exclude
 Parameter Exclude
 Parameter Exclude = 0x0
Default device
found, pass 2
InterruptPin = 0x0
InterruptLine = 0x0
Range 4 = 0xd801
found suitable device
DevId = 4D38105A Class = 0001/0080, SubVen/Sys 105a/4d33
-- BusID: 0x0:0xa:0x0
Storage Class
DevId = 4D38105A Class = 0001/0080, ProgIf 00
 Parameter Include
 Parameter Include = 0x0
No force include, check exclude
 Parameter Exclude
 Parameter Exclude = 0x0
Default device
found, pass 2
InterruptPin = 0x1
InterruptLine = 0x9
Range 0 = 0xb801
Range 1 = 0xb401
Range 2 = 0xb001
Range 3 = 0xa801
Range 4 = 0xa401
Range 5 = 0xcd000000
found suitable device
Add to BMList, AltInit 0
  BMListLen=2
 Parameter WaitBusyCount
 Parameter WaitBusyCount = 0xc8
 Parameter WaitBusyDelay
 Parameter WaitBusyDelay = 0xa
 Parameter WaitDrqDelay
 Parameter WaitDrqDelay = 0xa
 Parameter WaitBusyLongCount
 Parameter WaitBusyLongCount = 0x7d0
 Parameter WaitBusyLongDelay
 Parameter WaitBusyLongDelay = 0xfa
 Parameter AtapiSendDisableIntr
 Parameter AtapiSendDisableIntr = 0x0
 Parameter AtapiDmaRawRead
 Parameter AtapiDmaRawRead = 0x1
 Parameter AtapiNoDma
 Parameter AtapiNoDma = 0x0
 Parameter MaxIsrWait
 Parameter MaxIsrWait = 0x28
 Parameter DriveSelectNanoDelay
 Parameter DriveSelectNanoDelay = 0x0


ATAPI IDE: Look for legacy ISA-bridged PCI IDE controller (onboard)


ATAPI IDE: BMListLen 2
UniataClaimLegacyPCIIDE:
(../hal/halx86/legacy/bussupp.c:1253) Slot assignment for 5 on bus 0
(../hal/halx86/legacy/bus/pcibus.c:727) WARNING: PCI Slot Resource Assignment is FOOBAR
ok 0x0
 Parameter IgnoreIsaCompatiblePci
 Parameter IgnoreIsaCompatiblePci = 0x0
Try init channel 0, method 0
UniataFindBusMasterController: Context=0, BMListLen=2
ConfigInfo->Length 8c
AdapterInterfaceType: Isa
bm_offset 0, channel 0 
AdapterInterfaceType=0x1
IoBusNumber=0x0
slotNumber=0x24
busDataRead
DevId = 71118086 Class = 0001/0001
Storage Class
MasterDev (1)
Check exclude
 Parameter Exclude
 Parameter Exclude = 0x0
UniataChipDetect:
HwFlags: 0x0
 Parameter ForceSimplex
 Parameter ForceSimplex = 0x0
i: 0x34
VendorID/DeviceID/Rev 0x8086/0x7111/0x1
i: 0x2
HwFlags: 0x0
 Parameter HwFlagsOverride
 Parameter HwFlagsOverride = 0x0
HwFlagsOverride: 0x0
 Parameter HwFlagsAdd
 Parameter HwFlagsAdd = 0x0
HwFlagsAdd: 0x0
HwFlags (final): 0x0
MaxTransferMode: 0x42
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x42
MaxTransferMode (overriden): 0x42
UniataChipDetectChannels:
MasterDev -> 1 chan
 Parameter Exclude
 Parameter Exclude = 0x0
PortMask 0x1
 Parameter PortMask
 Parameter PortMask = 0x1
Force PortMask 0x1
mask -> 1 chans
 Parameter NumberChannels
 Parameter NumberChannels = 0x1
reg -> 1 chans
Final PortMask 0x1
allocate 2 Luns for 1 channels
ForceSimplex = 0
HwFlags = 0
 (0)HwFlags = 0
 (1)HwFlags = 0
 (2)found suitable device
HwFlags = 0
 (3)Range 4 = 0xd801
IsBusMaster == TRUE
  AtapiGetIoRange:
  AtapiGetIoRange: rid 0x4, start 0x0, offs 0x0, len 0x8, mem 0x0
  AtapiGetIoRange: (2) 0xd800
  BusMasterAddress (base): 0xd800
AtapiReadChipConfig: devExt 0xb267f2b4
AtapiReadChipConfig: dev 0x0, ph chan -1
 Parameter ForceSimplex
 Parameter ForceSimplex = 0x0
MaxTransferMode (base): 0x42
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x42
MaxTransferMode (overriden): 0x42
 Parameter Force80pin
 Parameter Force80pin = 0x0
 Parameter AtapiDmaZeroTransfer
 Parameter AtapiDmaZeroTransfer = 0x0
 Parameter AtapiDmaControlCmd
 Parameter AtapiDmaControlCmd = 0x0
 Parameter AtapiDmaRawRead
 Parameter AtapiDmaRawRead = 0x1
 Parameter AtapiDmaReadWrite
 Parameter AtapiDmaReadWrite = 0x1
AtapiChipInit: dev 0x0, ph chan -2, c -1
HwFlags: 0x0
VendorID/DeviceID/Rev 0x8086/0x7111/0x1
  re-enable IO resources of MasterDev
Enabling Mem/Io spaces and busmastering...
Initial pciData.Command = 0x5
PCI_ENABLE_IO_SPACE
PCI_ENABLE_MEMORY_SPACE
New pciData.Command = 0x5
PCI_ENABLE_BUS_MASTER
InterruptLine = 0x0
Final pciData.Command = 0x5
AtapiChipInit: dev 0x0, ph chan 0, c 0
HwFlags: 0x0
VendorID/DeviceID/Rev 0x8086/0x7111/0x1
simplexOnly = 0 (2)MasterDev (2)
1 channels & 1 irq for 1 controller
update ConfigInfo->nt4
using AtaReq sz 1000
update ConfigInfo->w2k: 64bit 0
chan[0] InterruptMode: 1, Level 14, Level2 0, Vector 0, Vector2 0
Reconstruct ConfigInfo
BMList[i].channel 0x0, NumberChannels 0x1, channel 0x0
de 0xb267f2b4, Channel 0x0
chan = 0xb267f758
AtapiSetupLunPtrs for channel 0 of 1, 2 luns 
  Chan 0xb267f758
  Lun 0x0
  Lun ptr 0xb243d008
  Lun 0x1
  Lun ptr 0xb243d320
AtapiReadChipConfig: devExt 0xb267f2b4
AtapiReadChipConfig: dev 0x0, ph chan 0
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x42
MaxTransferMode (overriden): 0x42
 Parameter ReorderEnable
 Parameter ReorderEnable = 0x1
 Parameter Force80pin
 Parameter Force80pin = 0x0
 Parameter ReadCacheEnable
 Parameter ReadCacheEnable = 0x1
 Parameter WriteCacheEnable
 Parameter WriteCacheEnable = 0x1
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x42
 Parameter PreferedTransferMode
 Parameter PreferedTransferMode = 0xffffffff
 Parameter AdvancedPowerMode
 Parameter AdvancedPowerMode = 0x80
 Parameter AcousticMgmt
 Parameter AcousticMgmt = 0x80
 Parameter StandbyTimer
 Parameter StandbyTimer = 0x0
 Parameter ReadOnly
 Parameter ReadOnly = 0x0
 Parameter GeomType
 Parameter GeomType = 0xffffffff
 Parameter Hidden
 Parameter Hidden = 0x0
 Parameter Exclude
 Parameter Exclude = 0x0
 Parameter ReadCacheEnable
 Parameter ReadCacheEnable = 0x1
 Parameter WriteCacheEnable
 Parameter WriteCacheEnable = 0x1
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x42
 Parameter PreferedTransferMode
 Parameter PreferedTransferMode = 0xffffffff
 Parameter AdvancedPowerMode
 Parameter AdvancedPowerMode = 0x80
 Parameter AcousticMgmt
 Parameter AcousticMgmt = 0x80
 Parameter StandbyTimer
 Parameter StandbyTimer = 0x0
 Parameter ReadOnly
 Parameter ReadOnly = 0x0
 Parameter GeomType
 Parameter GeomType = 0xffffffff
 Parameter Hidden
 Parameter Hidden = 0x0
 Parameter Exclude
 Parameter Exclude = 0x0
set AccessRanges
Getting IO ranges
IO range 1 0x1f0
IO range 2 0x3f6
  IO_0x0 (0x1f0), IO:
  IO_0x10 (0x3f6), IO:
  IO_0x12 (0xd800), IO:
  IO_0x17 (0x0), IO:
  AltStatus (0x50)
  Reg_0x1 (0x1f1) = 0x0
  Reg_0x2 (0x1f2) = 0x3
  Reg_0x3 (0x1f3) = 0x1
  Reg_0x4 (0x1f4) = 0x0
  Reg_0x5 (0x1f5) = 0x8
  Reg_0x6 (0x1f6) = 0xa0
  Reg_0x7 (0x1f7) = 0x50
  BM_0x0 (0xd800) = 0x0
  BM_0x1 (0xd801) = 0x0
  BM_0x2 (0xd802) = 0x64
  BM_0x3 (0xd803) = 0x0
clean IDE intr 0
clean IDE intr 1
  DMA status 0x64
  clear unexpected DMA intr
AtapiDmaDone: dev 0
claim Compatible controller
claim Primary
AtapiDmaAlloc: allocate tmp buffers below 4Gb
AtapiVirtToPhysAddr_: b267e008 -> 00000000:04f7d008
AtapiVirtToPhysAddr_: b241d000 -> 00000000:04d1c000
exit: init spinlock
MasterDev=0x1, NumberChannels=0x1, Isr2DevObj=0xb243e348
Init ISR:
Unnecessary
MasterDev=0x1, NumberChannels=0x1, Isr2DevObj=0xb243e348
do not tell system, that we know about PCI IO ranges
final chan[1] InterruptMode: 1, Level 14, Level2 0, Vector 0, Vector2 0
return SP_RETURN_FOUND
Attempt 0 of MasterDev ok
(../ntoskrnl/io/iomgr/iorsrce.c:874) IoReportResourceUsage is halfplemented!
AtapiHwInitialize: (base)
  mark chan 0 of master controller [0] as inited
AtapiChipInit: dev 0xffffffff, ph chan -1, c -1
HwFlags: 0x0
VendorID/DeviceID/Rev 0x8086/0x7111/0x1
  re-enable IO resources of MasterDev
Enabling Mem/Io spaces and busmastering...
Initial pciData.Command = 0x5
PCI_ENABLE_IO_SPACE
PCI_ENABLE_MEMORY_SPACE
New pciData.Command = 0x5
PCI_ENABLE_BUS_MASTER
InterruptLine = 0x0
Final pciData.Command = 0x5
AtapiChipInit: dev 0xffffffff, ph chan 0, c 0
HwFlags: 0x0
VendorID/DeviceID/Rev 0x8086/0x7111/0x1
FindDevices:
AtapiDisableInterrupts_0: 0
  max_ldev 2
CheckDevice: Device 0x0
CheckDevice: reset dev
AtapiSoftReset:
  statusByte2 50:
 set DFLAGS_REINIT_DMA
  DMA status 0x4
  clear unexpected DMA intr on ATAPI reset
AtapiDmaDone: dev 0
  ATAPI at home
  ATAPI at home
CheckDevice: status 0x0
CheckDevice: ATAPI signature found
IssueIdentify: Checking for ATAPI. Status (0x0)
IssueIdentify: Checking for ATAPI (2). Status (0x0)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0
IssueIdentify: IDE_STATUS_DRQ (0x58)
IssueIdentify: Status before read words 0x58
IssueIdentify: statusByte 0x58
IssueIdentify: BASE statusByte 0x58
IssueIdentify: iReason 2
IssueIdentify: wCount 200
  use 16bit IO
IssueIdentify: suck data port
IssueIdentify: statusByte 0x50
IssueIdentify: statusByte 0x50
IssueIdentify: Status after read words 0x50
Model: LHD--TTSVD-DAR MHG22
FW:    .120
S/N:                       
Pio:   2
APio:  3
SWDMA: 0
MWDMA: 0
UDMA:  4/1f
SATA:  0
SATA support: 0, CAPs 0x0
OrigTransferMode: 44, Active: 42
Accoustic 0, cur 0
AdvPowerMode 0
PowerMngt 0/0, APM 0/0
InitBadBlocks local
LunExt 0xb243d008
S/N:HL-DT-STDVD-RAM_GH22LP20________________-____________________
IssueIdentify: Device does not interrupt on assertion of DRQ.
IssueIdentify: Device is CD/Optical drive.
IssueIdentify: AtapiCmdSize 0x0
IssueIdentify: final Status on exit (0x50)
CheckDevice: Device 0x0 is ATAPI
CheckDevice: check status: found
CheckDevice: Device 0x1
CheckDevice: reset dev
AtapiSoftReset:
  statusByte2 50:
 set DFLAGS_REINIT_DMA
  DMA status 0x0
  ATAPI at home
  ATAPI at home
CheckDevice: status 0x0
CheckDevice: ATAPI signature found
IssueIdentify: Checking for ATAPI. Status (0x0)
IssueIdentify: Checking for ATAPI (2). Status (0x0)
AtaCommand48: cntrlr 0x0:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0
IssueIdentify: IDE_STATUS_DRQ (0x58)
IssueIdentify: Status before read words 0x58
IssueIdentify: statusByte 0x58
IssueIdentify: BASE statusByte 0x58
IssueIdentify: iReason 2
IssueIdentify: wCount 200
  use 16bit IO
IssueIdentify: suck data port
IssueIdentify: statusByte 0x50
IssueIdentify: statusByte 0x50
IssueIdentify: Status after read words 0x50
Model: DT K    DCWR042184 B
FW:    7Z4S
S/N:                       
Pio:   2
APio:  3
SWDMA: 0
MWDMA: 0
UDMA:  4/7
SATA:  0
SATA support: 0, CAPs 0x0
OrigTransferMode: 42, Active: 42
Accoustic 0, cur 0
AdvPowerMode 0
PowerMngt 0/0, APM 0/0
InitBadBlocks local
LunExt 0xb243d320
S/N:TDK_____CDRW401248B_____________________-____________________
IssueIdentify: Device does not interrupt on assertion of DRQ.
IssueIdentify: Device is CD/Optical drive.
IssueIdentify: AtapiCmdSize 0x0
IssueIdentify: final Status on exit (0x50)
CheckDevice: Device 0x1 is ATAPI
CheckDevice: check status: found
FindDevices: select 0 dev to clear INTR
FindDevices: statusByte=0x50
FindDevices: select 1 dev to clear INTR
FindDevices: statusByte=0x50
FindDevices: select 0 dev on exit
AtapiEnableInterrupts_0: 1
FindDevices: returning 1
AtapiHwInitialize: lChannel 0x0, dev 0
AtapiDisableInterrupts_0: 0
AtapiHwInitialize: ATAPI/Changer branch
  try mode 0x42
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
Intel 0
AtaSetTransferMode: Set 0x42 on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x42 feature 0x3
  0x40 3300/2300, 0x44 0/0
Using 0x42 mode
AtapiEnableInterrupts_0: 1
AtapiHwInitialize: lChannel 0x0, dev 1
AtapiDisableInterrupts_0: 0
AtapiHwInitialize: ATAPI/Changer branch
  try mode 0x42
AtapiDmaInit__: Set (U)DMA on Device 1
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
Intel 0
AtaSetTransferMode: Set 0x42 on Device 0/1
AtaCommand48: cntrlr 0x0:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0x42 feature 0x3
  0x40 ff/0, 0x44 f/b
Using 0x42 mode
AtapiEnableInterrupts_0: 1
AtapiHwInitialize: (base) done
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 2
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf7580200, CDB 0xf7580230, AtaReq 0xb266d000, SCmd 0x12
UniataNeedQueueing: TopLevel, qd=0
Send to device 12
TopLevel (2), srb 0xf7580200
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 12
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 12 (Cdb f7580230)
  assume IN
AtapiSendCommand: zero/unaligned transfer 24, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 12
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiDmaReinit: set PIO mode on Device 0 (42 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
Intel 0
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f7580230 Command 0x12 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x24.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f7580200
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x24
IdeIntr: Read 0x12 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf750cc30, srb->DataBuffer 0xf750cc30
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf750cc54, srb->DataBuffer 0xf750cc30, len 0x24
   Transfered 24, full size 24
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xf7580200, status 1
AtapiInterrupt: RequestComplete, srb 0xf7580200
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x1:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xf7580200 complete with status 0xa
AtapiStartIo: UniataRemoveRequest(0, f7580200)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf7580200, CDB 0xf7580230, AtaReq 0xb266d000, SCmd 0x12
UniataNeedQueueing: TopLevel, qd=0
Send to device 12
TopLevel (2), srb 0xf7580200
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 12
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 12 (Cdb f7580230)
  assume IN
AtapiSendCommand: zero/unaligned transfer 24, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 12
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiDmaReinit: set PIO mode on Device 1 (42 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
Intel 0
AtaSetTransferMode: Set 0xc on Device 0/1
AtaCommand48: cntrlr 0x0:0x0 dev 0x1, cmd 0xef, lba 0x0 count 0xc feature 0x3
  0x40 ff/0, 0x44 f/b
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f7580230 Command 0x12 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x24.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0xd, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f7580200
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x24
IdeIntr: Read 0x12 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf750cc30, srb->DataBuffer 0xf750cc30
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf750cc54, srb->DataBuffer 0xf750cc30, len 0x24
   Transfered 24, full size 24
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xf7580200, status 1
AtapiInterrupt: RequestComplete, srb 0xf7580200
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x1:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xf7580200 complete with status 0xa
AtapiStartIo: UniataRemoveRequest(0, f7580200)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
AtapiStartIo: Communication port
  INQUIRY
AtapiStartIo: Srb 0xf7580200 complete with status 0x1
AtapiStartIo: UniataRemoveRequest(0, f7580200)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x1:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xf7580200 complete with status 0xa
AtapiStartIo: UniataRemoveRequest(0, f7580200)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xf7580200 complete with status 0xa
AtapiStartIo: UniataRemoveRequest(0, f7580200)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
ScsiPortInitialize Status 0x0
 Parameter IgnoreIsaCompatiblePci
 Parameter IgnoreIsaCompatiblePci = 0x0
Try init channel 1, method 0
UniataFindBusMasterController: Context=0, BMListLen=2
ConfigInfo->Length 8c
AdapterInterfaceType: Isa
bm_offset 8, channel 1 
AdapterInterfaceType=0x1
IoBusNumber=0x0
slotNumber=0x24
busDataRead
DevId = 71118086 Class = 0001/0001
Storage Class
MasterDev (1)
Check exclude
 Parameter Exclude
 Parameter Exclude = 0x0
UniataChipDetect:
HwFlags: 0x0
 Parameter ForceSimplex
 Parameter ForceSimplex = 0x0
i: 0x34
VendorID/DeviceID/Rev 0x8086/0x7111/0x1
i: 0x2
HwFlags: 0x0
 Parameter HwFlagsOverride
 Parameter HwFlagsOverride = 0x0
HwFlagsOverride: 0x0
 Parameter HwFlagsAdd
 Parameter HwFlagsAdd = 0x0
HwFlagsAdd: 0x0
HwFlags (final): 0x0
MaxTransferMode: 0x42
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x42
MaxTransferMode (overriden): 0x42
UniataChipDetectChannels:
MasterDev -> 1 chan
 Parameter Exclude
 Parameter Exclude = 0x0
PortMask 0x1
 Parameter PortMask
 Parameter PortMask = 0x1
Force PortMask 0x1
mask -> 1 chans
 Parameter NumberChannels
 Parameter NumberChannels = 0x1
reg -> 1 chans
Final PortMask 0x1
allocate 2 Luns for 1 channels
ForceSimplex = 0
HwFlags = 0
 (0)HwFlags = 0
 (1)HwFlags = 0
 (2)found suitable device
HwFlags = 0
 (3)Range 4 = 0xd801
IsBusMaster == TRUE
  AtapiGetIoRange:
  AtapiGetIoRange: rid 0x4, start 0x0, offs 0x8, len 0x8, mem 0x0
  AtapiGetIoRange: (2) 0xd808
  BusMasterAddress (base): 0xd808
AtapiReadChipConfig: devExt 0xb266c7dc
AtapiReadChipConfig: dev 0x0, ph chan -1
 Parameter ForceSimplex
 Parameter ForceSimplex = 0x0
MaxTransferMode (base): 0x42
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x42
MaxTransferMode (overriden): 0x42
 Parameter Force80pin
 Parameter Force80pin = 0x0
 Parameter AtapiDmaZeroTransfer
 Parameter AtapiDmaZeroTransfer = 0x0
 Parameter AtapiDmaControlCmd
 Parameter AtapiDmaControlCmd = 0x0
 Parameter AtapiDmaRawRead
 Parameter AtapiDmaRawRead = 0x1
 Parameter AtapiDmaReadWrite
 Parameter AtapiDmaReadWrite = 0x1
AtapiChipInit: dev 0x0, ph chan -2, c -1
HwFlags: 0x0
VendorID/DeviceID/Rev 0x8086/0x7111/0x1
  re-enable IO resources of MasterDev
Enabling Mem/Io spaces and busmastering...
Initial pciData.Command = 0x5
PCI_ENABLE_IO_SPACE
PCI_ENABLE_MEMORY_SPACE
New pciData.Command = 0x5
PCI_ENABLE_BUS_MASTER
InterruptLine = 0x0
Final pciData.Command = 0x5
AtapiChipInit: dev 0x0, ph chan 0, c 0
HwFlags: 0x0
VendorID/DeviceID/Rev 0x8086/0x7111/0x1
simplexOnly = 0 (2)MasterDev (2)
1 channels & 1 irq for 1 controller
update ConfigInfo->nt4
using AtaReq sz 1000
update ConfigInfo->w2k: 64bit 0
chan[1] InterruptMode: 1, Level 15, Level2 0, Vector 0, Vector2 0
Reconstruct ConfigInfo
BMList[i].channel 0x1, NumberChannels 0x1, channel 0x1
de 0xb266c7dc, Channel 0x1
chan = 0xb266b008
AtapiSetupLunPtrs for channel 0 of 1, 2 luns 
  Chan 0xb266b008
  Lun 0x0
  Lun ptr 0xb241a008
  Lun 0x1
  Lun ptr 0xb241a320
AtapiReadChipConfig: devExt 0xb266c7dc
AtapiReadChipConfig: dev 0x0, ph chan 1
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x42
MaxTransferMode (overriden): 0x42
 Parameter ReorderEnable
 Parameter ReorderEnable = 0x1
 Parameter Force80pin
 Parameter Force80pin = 0x0
 Parameter ReadCacheEnable
 Parameter ReadCacheEnable = 0x1
 Parameter WriteCacheEnable
 Parameter WriteCacheEnable = 0x1
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x42
 Parameter PreferedTransferMode
 Parameter PreferedTransferMode = 0xffffffff
 Parameter AdvancedPowerMode
 Parameter AdvancedPowerMode = 0x80
 Parameter AcousticMgmt
 Parameter AcousticMgmt = 0x80
 Parameter StandbyTimer
 Parameter StandbyTimer = 0x0
 Parameter ReadOnly
 Parameter ReadOnly = 0x0
 Parameter GeomType
 Parameter GeomType = 0xffffffff
 Parameter Hidden
 Parameter Hidden = 0x0
 Parameter Exclude
 Parameter Exclude = 0x0
 Parameter ReadCacheEnable
 Parameter ReadCacheEnable = 0x1
 Parameter WriteCacheEnable
 Parameter WriteCacheEnable = 0x1
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x42
 Parameter PreferedTransferMode
 Parameter PreferedTransferMode = 0xffffffff
 Parameter AdvancedPowerMode
 Parameter AdvancedPowerMode = 0x80
 Parameter AcousticMgmt
 Parameter AcousticMgmt = 0x80
 Parameter StandbyTimer
 Parameter StandbyTimer = 0x0
 Parameter ReadOnly
 Parameter ReadOnly = 0x0
 Parameter GeomType
 Parameter GeomType = 0xffffffff
 Parameter Hidden
 Parameter Hidden = 0x0
 Parameter Exclude
 Parameter Exclude = 0x0
set AccessRanges
Getting IO ranges
IO range 1 0x170
IO range 2 0x376
  IO_0x0 (0x170), IO:
  IO_0x10 (0x376), IO:
  IO_0x12 (0xd808), IO:
  IO_0x17 (0x0), IO:
  AltStatus (0x50)
  Reg_0x1 (0x171) = 0x0
  Reg_0x2 (0x172) = 0xb
  Reg_0x3 (0x173) = 0x1
  Reg_0x4 (0x174) = 0x0
  Reg_0x5 (0x175) = 0x2
  Reg_0x6 (0x176) = 0xb0
  Reg_0x7 (0x177) = 0x50
  BM_0x0 (0xd808) = 0x0
  BM_0x1 (0xd809) = 0x0
  BM_0x2 (0xd80a) = 0x64
  BM_0x3 (0xd80b) = 0x0
clean IDE intr 0
clean IDE intr 1
  DMA status 0x64
  clear unexpected DMA intr
AtapiDmaDone: dev 0
claim Compatible controller
claim Secondary
AtapiDmaAlloc: allocate tmp buffers below 4Gb
AtapiVirtToPhysAddr_: b266b800 -> 00000000:04f6a800
AtapiVirtToPhysAddr_: b23fa000 -> 00000000:04cf9000
exit: init spinlock
MasterDev=0x1, NumberChannels=0x1, Isr2DevObj=0xb243e348
Init ISR:
Unnecessary
MasterDev=0x1, NumberChannels=0x1, Isr2DevObj=0xb243e348
do not tell system, that we know about PCI IO ranges
final chan[2] InterruptMode: 1, Level 15, Level2 0, Vector 0, Vector2 0
return SP_RETURN_FOUND
Attempt 0 of MasterDev ok
(../ntoskrnl/io/iomgr/iorsrce.c:874) IoReportResourceUsage is halfplemented!
AtapiHwInitialize: (base)
  mark chan 1 of master controller [0] as inited
AtapiChipInit: dev 0xffffffff, ph chan -1, c -1
HwFlags: 0x0
VendorID/DeviceID/Rev 0x8086/0x7111/0x1
  re-enable IO resources of MasterDev
Enabling Mem/Io spaces and busmastering...
Initial pciData.Command = 0x5
PCI_ENABLE_IO_SPACE
PCI_ENABLE_MEMORY_SPACE
New pciData.Command = 0x5
PCI_ENABLE_BUS_MASTER
InterruptLine = 0x0
Final pciData.Command = 0x5
AtapiChipInit: dev 0xffffffff, ph chan 1, c 0
HwFlags: 0x0
VendorID/DeviceID/Rev 0x8086/0x7111/0x1
FindDevices:
AtapiDisableInterrupts_0: 0
  max_ldev 2
CheckDevice: Device 0x0
CheckDevice: reset dev
AtapiSoftReset:
  statusByte2 50:
 set DFLAGS_REINIT_DMA
  DMA status 0x4
  clear unexpected DMA intr on ATAPI reset
AtapiDmaDone: dev 0
  ATAPI at home
  ATAPI at home
CheckDevice: status 0x0
CheckDevice: ATAPI signature found
IssueIdentify: Checking for ATAPI. Status (0x0)
IssueIdentify: Checking for ATAPI (2). Status (0x0)
AtaCommand48: cntrlr 0x0:0x1 dev 0x0, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0
IssueIdentify: IDE_STATUS_DRQ (0x58)
IssueIdentify: Status before read words 0x58
IssueIdentify: statusByte 0x58
IssueIdentify: BASE statusByte 0x58
IssueIdentify: iReason 2
IssueIdentify: wCount 200
  use 16bit IO
IssueIdentify: suck data port
IssueIdentify: statusByte 0x50
IssueIdentify: statusByte 0x50
IssueIdentify: Status after read words 0x50
Model: eSgata eTS8T00A0    
FW:    .544
S/N:                       
Pio:   2
APio:  3
SWDMA: 4
MWDMA: 4
SATA:  0
SATA support: 0, CAPs 0x0
OrigTransferMode: 22, Active: 22
Accoustic 0, cur 0
AdvPowerMode 0
PowerMngt 0/0, APM 0/0
InitBadBlocks local
LunExt 0xb241a008
S/N:Seagate_STT8000A________________________-________
IssueIdentify: Device does not interrupt on assertion of DRQ.
IssueIdentify: Device is a tape drive.
IssueIdentify: AtapiCmdSize 0x0
IssueIdentify: final Status on exit (0x50)
CheckDevice: Device 0x0 is ATAPI
CheckDevice: check status: found
CheckDevice: Device 0x1
CheckDevice: reset dev
AtapiSoftReset:
  statusByte2 50:
 set DFLAGS_REINIT_DMA
  DMA status 0x0
  ATAPI at home
  ATAPI at home
CheckDevice: status 0x0
CheckDevice: ATAPI signature found
IssueIdentify: Checking for ATAPI. Status (0x0)
IssueIdentify: Checking for ATAPI (2). Status (0x0)
AtaCommand48: cntrlr 0x0:0x1 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0
IssueIdentify: IDE_STATUS_DRQ (0x58)
IssueIdentify: Status before read words 0x58
IssueIdentify: statusByte 0x58
IssueIdentify: BASE statusByte 0x58
IssueIdentify: iReason 2
IssueIdentify: wCount 200
  use 16bit IO
IssueIdentify: suck data port
IssueIdentify: statusByte 0x50
IssueIdentify: statusByte 0x50
IssueIdentify: Status after read words 0x50
Model: SL1-02V RE 5  00    
FW:    5F51
S/N:   29809M0A9056        
Pio:   2
APio:  1
SWDMA: 0
MWDMA: 2
SATA:  0
SATA support: 0, CAPs 0x0
OrigTransferMode: 21, Active: 21
Accoustic 0, cur 0
AdvPowerMode 0
PowerMngt 0/0, APM 0/0
IssueIdentify: Marking drive 1 as removable. SFE = 257
InitBadBlocks local
LunExt 0xb241a320
S/N:LS-120_VER5___00______________UHD_Floppy-9208M9A00965________
IssueIdentify: Device does not interrupt on assertion of DRQ.
IssueIdentify: ATAPI drive type 0x0.
IssueIdentify: AtapiCmdSize 0x0
IssueIdentify: final Status on exit (0x50)
CheckDevice: Device 0x1 is ATAPI
CheckDevice: check status: found
FindDevices: select 0 dev to clear INTR
FindDevices: statusByte=0x50
FindDevices: select 1 dev to clear INTR
FindDevices: statusByte=0x50
FindDevices: select 0 dev on exit
AtapiEnableInterrupts_0: 1
FindDevices: returning 1
AtapiHwInitialize: lChannel 0x0, dev 0
AtapiDisableInterrupts_0: 0
AtapiHwInitialize: ATAPI/Changer branch
  try mode 0x42
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:2:-1
Intel 1
AtaSetTransferMode: Set 0x22 on Device 0/0
AtaCommand48: cntrlr 0x0:0x1 dev 0x0, cmd 0xef, lba 0x0 count 0x22 feature 0x3
  0x40 33000000/23000000, 0x44 0/0
Using 0x22 mode
AtapiEnableInterrupts_0: 1
AtapiHwInitialize: lChannel 0x0, dev 1
AtapiDisableInterrupts_0: 0
AtapiHwInitialize: ATAPI/Changer branch
  try mode 0x42
AtapiDmaInit__: Set (U)DMA on Device 1
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=3:1:-1
Intel 1
AtaSetTransferMode: Set 0x21 on Device 0/1
AtaCommand48: cntrlr 0x0:0x1 dev 0x1, cmd 0xef, lba 0x0 count 0x21 feature 0x3
  0x40 ff0000/0, 0x44 f0/90
Using 0x21 mode
AtapiEnableInterrupts_0: 1
AtapiHwInitialize: (base) done
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 1
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf7580200, CDB 0xf7580230, AtaReq 0xb23e9000, SCmd 0x12
UniataNeedQueueing: TopLevel, qd=0
Send to device 12
TopLevel (2), srb 0xf7580200
TopLevel (3), AtaReq 0xb23e9000
Try ATAPI send 12
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 12 (Cdb f7580230)
  assume IN
AtapiSendCommand: zero/unaligned transfer 24, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 12
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiDmaReinit: set PIO mode on Device 0 (22 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x22
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_WDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
Intel 1
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x0:0x1 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
  0x40 33000000/23000000, 0x44 0/0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f7580230 Command 0x12 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x24.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f7580200
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x24
IdeIntr: Read 0x12 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf750cc30, srb->DataBuffer 0xf750cc30
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf750cc54, srb->DataBuffer 0xf750cc30, len 0x24
   Transfered 24, full size 24
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xf7580200, status 1
AtapiInterrupt: RequestComplete, srb 0xf7580200
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x1:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xf7580200 complete with status 0xa
AtapiStartIo: UniataRemoveRequest(0, f7580200)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf7580200, CDB 0xf7580230, AtaReq 0xb23e9000, SCmd 0x12
UniataNeedQueueing: TopLevel, qd=0
Send to device 12
TopLevel (2), srb 0xf7580200
TopLevel (3), AtaReq 0xb23e9000
Try ATAPI send 12
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 12 (Cdb f7580230)
  assume IN
AtapiSendCommand: zero/unaligned transfer 24, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 12
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiDmaReinit: set PIO mode on Device 1 (21 -> b)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x21
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_WDMA   =>   0xffffffff
Setup chip a:w:u=3:-1:-1
Intel 1
AtaSetTransferMode: Set 0xb on Device 0/1
AtaCommand48: cntrlr 0x0:0x1 dev 0x1, cmd 0xef, lba 0x0 count 0xb feature 0x3
  0x40 ff0000/0, 0x44 f0/90
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f7580230 Command 0x12 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x24.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f7580200
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x24
IdeIntr: Read 0x12 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf750cc30, srb->DataBuffer 0xf750cc30
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf750cc54, srb->DataBuffer 0xf750cc30, len 0x24
   Transfered 24, full size 24
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xf7580200, status 1
AtapiInterrupt: RequestComplete, srb 0xf7580200
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x1:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xf7580200 complete with status 0xa
AtapiStartIo: UniataRemoveRequest(0, f7580200)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
AtapiStartIo: Communication port
  INQUIRY
AtapiStartIo: Srb 0xf7580200 complete with status 0x1
AtapiStartIo: UniataRemoveRequest(0, f7580200)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x1:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xf7580200 complete with status 0xa
AtapiStartIo: UniataRemoveRequest(0, f7580200)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xf7580200 complete with status 0xa
AtapiStartIo: UniataRemoveRequest(0, f7580200)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
ScsiPortInitialize Status 0x0
Ok, no more retries required
!BMList[i].MasterDev


ATAPI IDE: Look for PCI IDE controller


ATAPI IDE: i 1, BMListLen 2
Try init 105a 4d38 
(../hal/halx86/legacy/bussupp.c:1253) Slot assignment for 5 on bus 0
(../hal/halx86/legacy/bus/pcibus.c:727) WARNING: PCI Slot Resource Assignment is FOOBAR
UniataFindBusMasterController: Context=1, BMListLen=2
ConfigInfo->Length 8c
bm_offset 0, channel 0 
AdapterInterfaceType=0x5
IoBusNumber=0x0
slotNumber=0xa
busDataRead
DevId = 4D38105A Class = 0001/0080
Storage Class
UniataChipDetect:
HwFlags: 0x0
 Parameter ForceSimplex
 Parameter ForceSimplex = 0x0
i: 0x11b
VendorID/DeviceID/Rev 0x105a/0x4d38/0x1
i: 0x1
HwFlags: 0x1
 Parameter HwFlagsOverride
 Parameter HwFlagsOverride = 0x1
HwFlagsOverride: 0x1
 Parameter HwFlagsAdd
 Parameter HwFlagsAdd = 0x0
HwFlagsAdd: 0x0
HwFlags (final): 0x1
MaxTransferMode: 0x44
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x44
MaxTransferMode (overriden): 0x44
UniataChipDetectChannels:
 Parameter Exclude
 Parameter Exclude = 0x0
 Parameter Exclude
 Parameter Exclude = 0x0
PortMask 0x3
 Parameter PortMask
 Parameter PortMask = 0x3
Force PortMask 0x3
mask -> 2 chans
 Parameter NumberChannels
 Parameter NumberChannels = 0x2
reg -> 2 chans
Final PortMask 0x3
allocate 2 Luns for 2 channels
ForceSimplex = 0
HwFlags = 1
 (0)HwFlags = 1
 (1)HwFlags = 1
 (2)found suitable device
HwFlags = 1
 (3)Range 0 = 0xb801
Range 1 = 0xb401
Range 2 = 0xb001
Range 3 = 0xa801
Range 4 = 0xa401
Range 5 = 0xcd000000
IsBusMaster == TRUE
  AtapiGetIoRange:
  AtapiGetIoRange: rid 0x4, start 0xa400, offs 0x0, len 0x10, mem 0x0
  AtapiGetIoRange: (2) 0xa400
  BusMasterAddress (base): 0xa400
IsBusMaster == TRUE && !MasterDev
  BM statusByte = 4
AtapiReadChipConfig: devExt 0xb26682b4
AtapiReadChipConfig: dev 0x1, ph chan -1
 Parameter ForceSimplex
 Parameter ForceSimplex = 0x0
MaxTransferMode (base): 0x44
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x44
MaxTransferMode (overriden): 0x44
 Parameter Force80pin
 Parameter Force80pin = 0x0
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x44
MaxTransferMode (overriden): 0x44
 Parameter Force80pin
 Parameter Force80pin = 0x0
 Parameter AtapiDmaZeroTransfer
 Parameter AtapiDmaZeroTransfer = 0x0
 Parameter AtapiDmaControlCmd
 Parameter AtapiDmaControlCmd = 0x0
 Parameter AtapiDmaRawRead
 Parameter AtapiDmaRawRead = 0x1
 Parameter AtapiDmaReadWrite
 Parameter AtapiDmaReadWrite = 0x1
AtapiChipInit: dev 0x1, ph chan -2, c -1
HwFlags: 0x1
VendorID/DeviceID/Rev 0x105a/0x4d38/0x1
AtapiChipInit: dev 0x1, ph chan 0, c 0
HwFlags: 0x1
VendorID/DeviceID/Rev 0x105a/0x4d38/0x1
AtapiChipInit: dev 0x1, ph chan 1, c 1
HwFlags: 0x1
VendorID/DeviceID/Rev 0x105a/0x4d38/0x1
simplexOnly = 0 (2)!MasterDev
update ConfigInfo->nt4
using AtaReq sz 1000
update ConfigInfo->w2k: 64bit 0
chan[0] InterruptMode: 0, Level 9, Level2 0, Vector 9, Vector2 0
Reconstruct ConfigInfo
set Dma32BitAddresses
BMList[i].channel 0x0, NumberChannels 0x2, channel 0x0
de 0xb26682b4, Channel 0x0
chan = 0xb26688e0
AtapiSetupLunPtrs for channel 0 of 2, 2 luns 
  Chan 0xb26688e0
  Lun 0x0
  Lun ptr 0xb23e6000
  Lun 0x1
  Lun ptr 0xb23e6318
AtapiReadChipConfig: devExt 0xb26682b4
AtapiReadChipConfig: dev 0x1, ph chan 0
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x44
MaxTransferMode (overriden): 0x44
 Parameter ReorderEnable
 Parameter ReorderEnable = 0x1
 Parameter Force80pin
 Parameter Force80pin = 0x0
 Parameter ReadCacheEnable
 Parameter ReadCacheEnable = 0x1
 Parameter WriteCacheEnable
 Parameter WriteCacheEnable = 0x1
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x44
 Parameter PreferedTransferMode
 Parameter PreferedTransferMode = 0xffffffff
 Parameter AdvancedPowerMode
 Parameter AdvancedPowerMode = 0x80
 Parameter AcousticMgmt
 Parameter AcousticMgmt = 0x80
 Parameter StandbyTimer
 Parameter StandbyTimer = 0x0
 Parameter ReadOnly
 Parameter ReadOnly = 0x0
 Parameter GeomType
 Parameter GeomType = 0xffffffff
 Parameter Hidden
 Parameter Hidden = 0x0
 Parameter Exclude
 Parameter Exclude = 0x0
 Parameter ReadCacheEnable
 Parameter ReadCacheEnable = 0x1
 Parameter WriteCacheEnable
 Parameter WriteCacheEnable = 0x1
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x44
 Parameter PreferedTransferMode
 Parameter PreferedTransferMode = 0xffffffff
 Parameter AdvancedPowerMode
 Parameter AdvancedPowerMode = 0x80
 Parameter AcousticMgmt
 Parameter AcousticMgmt = 0x80
 Parameter StandbyTimer
 Parameter StandbyTimer = 0x0
 Parameter ReadOnly
 Parameter ReadOnly = 0x0
 Parameter GeomType
 Parameter GeomType = 0xffffffff
 Parameter Hidden
 Parameter Hidden = 0x0
 Parameter Exclude
 Parameter Exclude = 0x0
Getting IO ranges
!MasterDev mode
IO range 1 0xb800
IO range 2 0xb402
  IO_0x0 (0xb800), IO:
  IO_0x10 (0xb402), IO:
  IO_0x12 (0xa400), IO:
  IO_0x17 (0x0), IO:
  AltStatus (0x50)
  Reg_0x1 (0xb801) = 0x0
  Reg_0x2 (0xb802) = 0x0
  Reg_0x3 (0xb803) = 0x0
  Reg_0x4 (0xb804) = 0x0
  Reg_0x5 (0xb805) = 0x0
  Reg_0x6 (0xb806) = 0xe0
  Reg_0x7 (0xb807) = 0x50
  BM_0x0 (0xa400) = 0x8
  BM_0x1 (0xa401) = 0x0
  BM_0x2 (0xa402) = 0x4
  BM_0x3 (0xa403) = 0x0
clean IDE intr 0
clean IDE intr 1
  DMA status 0x4
  clear unexpected DMA intr
AtapiDmaDone: dev 0
AtapiDmaAlloc: allocate tmp buffers below 4Gb
AtapiVirtToPhysAddr_: b2667008 -> 00000000:04f66008
AtapiVirtToPhysAddr_: b23c6000 -> 00000000:04cc5000
de 0xb26682b4, Channel 0x1
chan = 0xb2668b40
AtapiSetupLunPtrs for channel 1 of 2, 2 luns 
  Chan 0xb2668b40
  Lun 0x0
  Lun ptr 0xb23e6630
  Lun 0x1
  Lun ptr 0xb23e6948
AtapiReadChipConfig: devExt 0xb26682b4
AtapiReadChipConfig: dev 0x1, ph chan 1
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x44
MaxTransferMode (overriden): 0x44
 Parameter ReorderEnable
 Parameter ReorderEnable = 0x1
 Parameter Force80pin
 Parameter Force80pin = 0x0
 Parameter ReadCacheEnable
 Parameter ReadCacheEnable = 0x1
 Parameter WriteCacheEnable
 Parameter WriteCacheEnable = 0x1
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x44
 Parameter PreferedTransferMode
 Parameter PreferedTransferMode = 0xffffffff
 Parameter AdvancedPowerMode
 Parameter AdvancedPowerMode = 0x80
 Parameter AcousticMgmt
 Parameter AcousticMgmt = 0x80
 Parameter StandbyTimer
 Parameter StandbyTimer = 0x0
 Parameter ReadOnly
 Parameter ReadOnly = 0x0
 Parameter GeomType
 Parameter GeomType = 0xffffffff
 Parameter Hidden
 Parameter Hidden = 0x0
 Parameter Exclude
 Parameter Exclude = 0x0
 Parameter ReadCacheEnable
 Parameter ReadCacheEnable = 0x1
 Parameter WriteCacheEnable
 Parameter WriteCacheEnable = 0x1
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x44
 Parameter PreferedTransferMode
 Parameter PreferedTransferMode = 0xffffffff
 Parameter AdvancedPowerMode
 Parameter AdvancedPowerMode = 0x80
 Parameter AcousticMgmt
 Parameter AcousticMgmt = 0x80
 Parameter StandbyTimer
 Parameter StandbyTimer = 0x0
 Parameter ReadOnly
 Parameter ReadOnly = 0x0
 Parameter GeomType
 Parameter GeomType = 0xffffffff
 Parameter Hidden
 Parameter Hidden = 0x0
 Parameter Exclude
 Parameter Exclude = 0x0
Getting IO ranges
!MasterDev mode
IO range 1 0xb000
IO range 2 0xa802
  IO_0x0 (0xb000), IO:
  IO_0x10 (0xa802), IO:
  IO_0x12 (0xa408), IO:
  IO_0x17 (0x0), IO:
  AltStatus (0x0)
  Reg_0x1 (0xb001) = 0x0
  Reg_0x2 (0xb002) = 0x0
  Reg_0x3 (0xb003) = 0x0
  Reg_0x4 (0xb004) = 0x0
  Reg_0x5 (0xb005) = 0x0
  Reg_0x6 (0xb006) = 0x0
  Reg_0x7 (0xb007) = 0x0
  BM_0x0 (0xa408) = 0x8
  BM_0x1 (0xa409) = 0x0
  BM_0x2 (0xa40a) = 0x2
  BM_0x3 (0xa40b) = 0x0
clean IDE intr 0
clean IDE intr 1
  DMA status 0x2
AtapiDmaAlloc: allocate tmp buffers below 4Gb
AtapiVirtToPhysAddr_: b2666008 -> 00000000:04f65008
AtapiVirtToPhysAddr_: b23a6000 -> 00000000:04ca5000
exit: init spinlock
MasterDev=0x0, NumberChannels=0x2, Isr2DevObj=0x0
Init ISR:
Multichannel native mode, go...
Create DO
DO name:  len(38, 38), \Device\uniata1_2ch
HalGetInterruptVector
  OrigAdapterInterfaceType=5
  SystemIoBusNumber=0
  BusInterruptLevel=9
  BusInterruptVector=9
isr2_de 0xb241aed0
isr2_vector 0x39
isr2_irql 0x12
isr2_affinity 0x1
IoConnectInterrupt
MasterDev=0x0, NumberChannels=0x2, Isr2DevObj=0xb241ae18
final chan[2] InterruptMode: 0, Level 9, Level2 0, Vector 9, Vector2 0
return SP_RETURN_FOUND
AtapiHwInitialize: (base)
AtapiChipInit: dev 0xffffffff, ph chan -1, c -1
HwFlags: 0x1
VendorID/DeviceID/Rev 0x105a/0x4d38/0x1
AtapiChipInit: dev 0xffffffff, ph chan 0, c 0
HwFlags: 0x1
VendorID/DeviceID/Rev 0x105a/0x4d38/0x1
FindDevices:
AtapiDisableInterrupts_0: 0
  max_ldev 2
CheckDevice: Device 0x0
CheckDevice: reset dev
AtapiSoftReset:
  statusByte2 50:
 set DFLAGS_REINIT_DMA
  DMA status 0x0
  HDD at home
  HDD at home
CheckDevice: status 0x51
CheckDevice: IDE device check
IssueIdentify: Checking for IDE. Status (0x50)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0
IssueIdentify: IDE_STATUS_DRQ (0x58)
IssueIdentify: Status before read words 0x58
IssueIdentify: statusByte 0x58
IssueIdentify: BASE statusByte 0x58
  use 16bit IO
IssueIdentify: suck data port
IssueIdentify: statusByte 0x50
IssueIdentify: statusByte 0x50
IssueIdentify: Status after read words 0x50
Model: TS830022 A          
FW:    .333
S/N:   K31BK1XP            
Pio:   2
APio:  3
SWDMA: 0
MWDMA: 0
UDMA:  10/3f
SATA:  0
SATA support: 0, CAPs 0x0
OrigTransferMode: 45, Active: 44
Accoustic 128, cur 128
AdvPowerMode 0
PowerMngt 1/1, APM 0/0
PhysLogSectorSize 0x0, 0x0, offset 0x0
NV PM_Sup 0, PM_En 0, En 0, PM ver 0x0 ver 0x0
R-rate 0
WC 1/1, LA 1/1, WB 1/1, RB 1/1, Q 0/0
Protected 1/1 status 0x1, rev 0x0
CHS 0x3fff:0x10:0x3f
NumOfSectors 0xfbfc10
NumberOfCylinders == 0x3fff
cylinders 0x25db5
NumOfSectors 0x950f8b0
SupportLba flag 0x1
SupportDMA flag 0x1
SoftReset 0x0
SupportIordy 0x1, DisableIordy 0x1
MajorRevision 0x7e
UserAddressableSectors 0x950f8b0
LBA mode
requested LunExt->GeomType=ffffffff
tmp_cylinders = 0x25db5
Use GEOM_STD, CHS=2601/ff/3f
Geometry: C 0x2601 (0x2601)
Geometry: H 0xff (0xff)
Geometry: S 0x3f (0x3f)
InitBadBlocks local
LunExt 0xb23e6000
S/N:ST380022A_______________________________-3KB11KPX____________
IssueIdentify: Device does not interrupt on assertion of DRQ.
IssueIdentify: hard drive.
IssueIdentify: final Status on exit (0x50)
CheckDevice: Device 0x0 is IDE
CheckDevice: check status: found
CheckDevice: Device 0x1
CheckDevice: reset dev
AtapiSoftReset:
  statusByte2 50:
 set DFLAGS_REINIT_DMA
  DMA status 0x0
  HDD at home
  HDD at home
CheckDevice: status 0x0
CheckDevice: IDE device check
IssueIdentify: Checking for IDE. Status (0x0)
IssueIdentify: statusByte != IDE_STATUS_IDLE
IssueIdentify: no dev (dev 1)
CheckDevice: try ATAPI 0x1, status 0x0
IssueIdentify: Checking for ATAPI. Status (0x0)
IssueIdentify: Checking for ATAPI (2). Status (0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
IssueIdentify: 0-status, not present
CheckDevice: Device 0x1 not responding
CheckDevice: check status: not found
FindDevices: select 0 dev to clear INTR
FindDevices: statusByte=0x50
FindDevices: select 1 dev to clear INTR
FindDevices: statusByte=0x0
FindDevices: select 0 dev on exit
AtapiEnableInterrupts_0: 1
FindDevices: returning 1
AtapiHwInitialize: lChannel 0x0, dev 0
AtapiDisableInterrupts_0: 0
AtapiHwInitialize: IDE branch
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0
AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16
  Try Enable Read Cache
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa
  Try Enable Write Cache
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2
  Try Enable Acoustic Mgmt
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42
  try mode 0x44
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x44
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x4
Setup chip a:w:u=4:2:4
AtaSetTransferMode: Set 0x44 on Device 0/0
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x44 feature 0x3
Using 0x44 mode
AtapiEnableInterrupts_0: 1
AtapiHwInitialize: lChannel 0x0, dev 1
AtapiChipInit: dev 0xffffffff, ph chan 1, c 1
HwFlags: 0x1
VendorID/DeviceID/Rev 0x105a/0x4d38/0x1
FindDevices:
AtapiDisableInterrupts_1: 0
  max_ldev 2
CheckDevice: Device 0x0
CheckDevice: reset dev
AtapiSoftReset:
  statusByte2 0:
 set DFLAGS_REINIT_DMA
  DMA status 0x2
  nobody home! 0x0 != 0x55
CheckDevice: Device 0x1
CheckDevice: reset dev
AtapiSoftReset:
  statusByte2 0:
 set DFLAGS_REINIT_DMA
  DMA status 0x2
  nobody home! 0x0 != 0x55
AtapiEnableInterrupts_1: 1
FindDevices: returning 0
AtapiHwInitialize: lChannel 0x1, dev 0
AtapiHwInitialize: lChannel 0x1, dev 1
AtapiHwInitialize: (base) done
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xf7580200, CDB 0xf7580230, AtaReq 0xb2395000, SCmd 0x12
UniataNeedQueueing: TopLevel, qd=0
Send to device 12
TopLevel (2), srb 0xf7580200
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf757fee8
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_INQUIRY PATH:LUN:TID = 0x0:0x0:0x0
IdeSendCommand: SCSIOP_INQUIRY ok
  HDD at home
RelativeAddressing
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xf7580200 complete with status 0x1
AtapiStartIo: AtapiDmaDBSync(b26688e0, f7580200)
AtapiStartIo: UniataRemoveRequest(b26688e0, f7580200)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26688e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x1:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xf7580200 complete with status 0xa
AtapiStartIo: UniataRemoveRequest(0, f7580200)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x4d38105a/0x1
UniataNeedQueueing: TopLevel, qd=0
Send to device 12
TopLevel (2), srb 0xf7580200
TopLevel (3), AtaReq 0xb2395000
  HDD at home
CheckDevice: Device 0x1
CheckDevice: reset dev
AtapiSoftReset:
  statusByte2 0:
 set DFLAGS_REINIT_DMA
  DMA status 0x0
  HDD at home
  HDD at home
CheckDevice: status 0x0
CheckDevice: IDE device check
IssueIdentify: Checking for IDE. Status (0x0)
IssueIdentify: statusByte != IDE_STATUS_IDLE
IssueIdentify: no dev (dev 1)
CheckDevice: try ATAPI 0x1, status 0x0
IssueIdentify: Checking for ATAPI. Status (0x0)
IssueIdentify: Checking for ATAPI (2). Status (0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
IssueIdentify: 0-status, not present
CheckDevice: Device 0x1 not responding
CheckDevice: check status: not found
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xf7580200 complete with status 0xa
AtapiStartIo: AtapiDmaDBSync(b26688e0, f7580200)
AtapiStartIo: UniataRemoveRequest(b26688e0, f7580200)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26688e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
UniataNeedQueueing: TopLevel, qd=0
Send to device 12
TopLevel (2), srb 0xf7580200
TopLevel (3), AtaReq 0xb2395000
  nobody home! 0x0 != 0x55
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xf7580200 complete with status 0xa
AtapiStartIo: AtapiDmaDBSync(b2668b40, f7580200)
AtapiStartIo: UniataRemoveRequest(b2668b40, f7580200)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b2668b40, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1
   DeviceID+VendorID/Rev 0x4d38105a/0x1
UniataNeedQueueing: TopLevel, qd=0
Send to device 12
TopLevel (2), srb 0xf7580200
TopLevel (3), AtaReq 0xb2395000
  nobody home! 0x0 != 0x55
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xf7580200 complete with status 0xa
AtapiStartIo: AtapiDmaDBSync(b2668b40, f7580200)
AtapiStartIo: UniataRemoveRequest(b2668b40, f7580200)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b2668b40, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
AtapiStartIo: Communication port
  INQUIRY
AtapiStartIo: Srb 0xf7580200 complete with status 0x1
AtapiStartIo: UniataRemoveRequest(0, f7580200)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x1:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xf7580200 complete with status 0xa
AtapiStartIo: UniataRemoveRequest(0, f7580200)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x0:0x1
   DeviceID+VendorID/Rev 0x4d38105a/0x1
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xf7580200 complete with status 0xa
AtapiStartIo: UniataRemoveRequest(0, f7580200)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
ScsiPortInitialize Status 0x0
 Parameter IgnoreIsa
 Parameter IgnoreIsa = 0x0


ATAPI IDE: Look for ISA Controllers
AtapiFindIsaController (ISA):
  assume max PIO4
allocate 2 Luns for 1 channels
AtapiSetupLunPtrs for channel 0 of 1, 2 luns 
  Chan 0xb2394b40
  Lun 0x0
  Lun ptr 0xb2663008
  Lun 0x1
  Lun ptr 0xb2663320
AtapiReadChipConfig: devExt 0xb23942b4
AtapiReadChipConfig: dev 0xffffffff, ph chan -1
 Parameter ForceSimplex
 Parameter ForceSimplex = 0x0
MaxTransferMode (base): 0xc
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0xc
MaxTransferMode (overriden): 0xc
 Parameter Force80pin
 Parameter Force80pin = 0x0
 Parameter AtapiDmaZeroTransfer
 Parameter AtapiDmaZeroTransfer = 0x0
 Parameter AtapiDmaControlCmd
 Parameter AtapiDmaControlCmd = 0x0
 Parameter AtapiDmaRawRead
 Parameter AtapiDmaRawRead = 0x1
 Parameter AtapiDmaReadWrite
 Parameter AtapiDmaReadWrite = 0x1
AtapiChipInit: dev 0xffffffff, ph chan -1, c -1
HwFlags: 0x0
VendorID/DeviceID/Rev 0x0/0x0/0x0
AtapiFindIsaController: adapterCount=0
portBase[0]=1f0
 Parameter PortBase
 Parameter PortBase = 0x1f0
 Parameter Irq
 Parameter Irq = 0x0
AtapiCheckIOInterference: AtdiskPrimaryClaimed
AtapiFindIsaController: !ioSpace
AtapiFindIsaController: adapterCount=1
portBase[1]=170
 Parameter PortBase
 Parameter PortBase = 0x170
 Parameter Irq
 Parameter Irq = 0x0
AtapiCheckIOInterference: AtdiskSecondaryClaimed
AtapiFindIsaController: !ioSpace
AtapiFindIsaController: adapterCount=2
portBase[2]=1e8
 Parameter PortBase
 Parameter PortBase = 0x1e8
 Parameter Irq
 Parameter Irq = 0x0
  BaseIoAddress1=1e8
  BaseIoAddress2=3ee
  expected InterruptLevel=b
  AltStatus (0xff)
  Reg_0x1 (0x1e9) = 0xff
  Reg_0x2 (0x1ea) = 0xff
  Reg_0x3 (0x1eb) = 0xff
  Reg_0x4 (0x1ec) = 0xff
  Reg_0x5 (0x1ed) = 0xff
  Reg_0x6 (0x1ee) = 0xff
  Reg_0x7 (0x1ef) = 0xff
AtapiFindIsaController: Identifier read back from Master (0xff)
AtapiFindIsaController: Identifier read back from Slave (0xff)
AtapiFindIsaController: cleanup AccessRanges 0
AtapiFindIsaController: cleanup AccessRanges 1
AtapiFindIsaController: adapterCount=3
portBase=1e8
 Parameter PortBase
 Parameter PortBase = 0x1e8
 Parameter Irq
 Parameter Irq = 0x0
  BaseIoAddress1=1e8
  BaseIoAddress2=3ee
  expected InterruptLevel=a
  AltStatus (0xff)
  Reg_0x1 (0x1e9) = 0xff
  Reg_0x2 (0x1ea) = 0xff
  Reg_0x3 (0x1eb) = 0xff
  Reg_0x4 (0x1ec) = 0xff
  Reg_0x5 (0x1ed) = 0xff
  Reg_0x6 (0x1ee) = 0xff
  Reg_0x7 (0x1ef) = 0xff
AtapiFindIsaController: Identifier read back from Master (0xff)
AtapiFindIsaController: Identifier read back from Slave (0xff)
AtapiFindIsaController: cleanup AccessRanges 0
AtapiFindIsaController: cleanup AccessRanges 1
AtapiFindIsaController: return SP_RETURN_NOT_FOUND
ScsiPortInitialize Status 0xc00000c0
 Parameter IgnoreMca
 Parameter IgnoreMca = 0x0


ATAPI IDE: Look for MCA Controllers
ScsiPortInitialize Status 0xc00000c0


Leave UNIATA MiniPort DriverEntry with status 0x0
(../ntoskrnl/io/iomgr/driver.c:1648) '\Driver\buslogic' initialization failed, status (0xc00000c0)
(../ntoskrnl/io/iomgr/driver.c:64) Deleting driver object '\Driver\buslogic'
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf75805d0, CDB 0xf7580600, AtaReq 0xb266d000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf75805d0
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 25
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f7580600)
  assume IN
AtapiSendCommand: zero/unaligned transfer 8, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 25
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f7580600 Command 0x25 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x8.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f75805d0
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x51
  base status 0x51
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x51)
AtapiInterrupt: iReason 3
AtapiInterrupt: Error 0x60
  Bad Lba 0x0
  wait 10 ready after ATAPI error
  Intr on DRQ 0
AtapiInterrupt: ATAPI Error, int reason 3
Errors in PIO mode
AtapiInterrupt: Error
AtapiInterrupt: CompleteRequest, srbstatus 4
AtapiInterrupt: Error. Begin mapping...
MapError: Error register is 0x60
ATAPI: Unit attention
AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xf75805d0, status 4
AtapiInterrupt: RequestComplete, srb 0xf75805d0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb26685e0, CDB 0xb2668610, AtaReq 0xb266d000, SCmd 0x3
UniataNeedQueueing: TopLevel, qd=0
Send to device 3
TopLevel (2), srb 0xb26685e0
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 3
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b2668610)
  assume IN
AtapiSendCommand: SCSIOP_REQUEST_SENSE, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 3
AtapiSendCommand: SCSIOP_REQUEST_SENSE -> no dma setup (2)
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b2668610 Command 0x3 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x51
  continue with SCSIOP_REQUEST_SENSE
AtapiSendCommand: Entry Status (0x51)
AtapiSendCommand: F:0x0, CntHL:0x0:0x12.
AtapiSendCommand: Poll for int. to send packet. Status (0x51)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b26685e0
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x12
IdeIntr: Read 0x9 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf750b818, srb->DataBuffer 0xf750b818
70 00 06 00 00 00 00 0a 00 00 00 00 29 00 00 00 
00 00 
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf750b82a, srb->DataBuffer 0xf750b818, len 0x12
   Transfered 12, full size 12
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xb26685e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb26685e0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf75805d0, CDB 0xf7580600, AtaReq 0xb266d000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf75805d0
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 25
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f7580600)
  assume IN
AtapiSendCommand: zero/unaligned transfer 8, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 25
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f7580600 Command 0x25 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x8.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f75805d0
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x8
IdeIntr: Read 0x4 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf750c830, srb->DataBuffer 0xf750c830
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf750c838, srb->DataBuffer 0xf750c830, len 0x8
   Transfered 8, full size 8
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xf75805d0, status 1
AtapiInterrupt: RequestComplete, srb 0xf75805d0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf75805d4, CDB 0xf7580604, AtaReq 0xb266d000, SCmd 0xbd
UniataNeedQueueing: TopLevel, qd=0
Send to device bd
TopLevel (2), srb 0xf75805d4
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send bd
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f7580604)
  assume IN
AtapiSendCommand: zero/unaligned transfer 8, no DMA setup
AtapiSendCommand: use_dma=0, Cmd bd
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f7580604 Command 0xbd to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x8.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f75805d4
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x8
IdeIntr: Read 0x4 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf750c830, srb->DataBuffer 0xf750c830
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: SCSIOP_MECHANISM_STATUS status 0x1
  set DFLAGS_CHANGER_INITED
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf750c838, srb->DataBuffer 0xf750c830, len 0x8
   Transfered 8, full size 8
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xf75805d4, status 1
AtapiInterrupt: RequestComplete, srb 0xf75805d4
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf758065c, CDB 0xf758068c, AtaReq 0xb266d000, SCmd 0x1a
UniataNeedQueueing: TopLevel, qd=0
Send to device 1a
TopLevel (2), srb 0xf758065c
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 1a
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f758068c)
  assume IN
AtapiSendCommand: zero/unaligned transfer 14, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 1a
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f758068c Command 0x1a to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x14.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f758065c
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x51
  base status 0x51
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x51)
AtapiInterrupt: iReason 3
AtapiInterrupt: Error 0x50
  Bad Lba 0x0
  wait 10 ready after ATAPI error
  Intr on DRQ 0
AtapiInterrupt: ATAPI Error, int reason 3
Errors in PIO mode
AtapiInterrupt: Error
AtapiInterrupt: CompleteRequest, srbstatus 4
AtapiInterrupt: Error. Begin mapping...
MapError: Error register is 0x50
ATAPI: Illegal request
AtapiInterrupt: Check for underflow, AtaReq->WordsLeft a
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xf758065c, status 4
AtapiInterrupt: RequestComplete, srb 0xf758065c
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb26685e0, CDB 0xb2668610, AtaReq 0xb266d000, SCmd 0x3
UniataNeedQueueing: TopLevel, qd=0
Send to device 3
TopLevel (2), srb 0xb26685e0
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 3
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b2668610)
  assume IN
AtapiSendCommand: SCSIOP_REQUEST_SENSE, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 3
AtapiSendCommand: SCSIOP_REQUEST_SENSE -> no dma setup (2)
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b2668610 Command 0x3 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x51
  continue with SCSIOP_REQUEST_SENSE
AtapiSendCommand: Entry Status (0x51)
AtapiSendCommand: F:0x0, CntHL:0x0:0x12.
AtapiSendCommand: Poll for int. to send packet. Status (0x51)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b26685e0
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x12
IdeIntr: Read 0x9 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf750b628, srb->DataBuffer 0xf750b628
70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00 
00 00 
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf750b63a, srb->DataBuffer 0xf750b628, len 0x12
   Transfered 12, full size 12
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xb26685e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb26685e0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf758065c, CDB 0xf758068c, AtaReq 0xb266d000, SCmd 0x5a
UniataNeedQueueing: TopLevel, qd=0
Send to device 5a
TopLevel (2), srb 0xf758065c
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 5a
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f758068c)
  assume IN
AtapiSendCommand: zero/unaligned transfer 18, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 5a
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f758068c Command 0x5a to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x18.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f758065c
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x14
AtapiInterrupt: 12 words requested; 10 words xferred
IdeIntr: Read 0xa words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf750c818, srb->DataBuffer 0xf750c818
  status re-check 0x50
AtapiInterrupt: early complete + underrun ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
WordsLeft 0x2 -> SRB_STATUS_DATA_OVERRUN
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf750c82c, srb->DataBuffer 0xf750c818, len 0x18
AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 2
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xf758065c, status 12
AtapiInterrupt: RequestComplete, srb 0xf758065c
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf758065c, CDB 0xf758068c, AtaReq 0xb266d000, SCmd 0xbe
UniataNeedQueueing: TopLevel, qd=0
Send to device be
TopLevel (2), srb 0xf758065c
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send be
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD be (Cdb f758068c)
  assume 0-transfer
AtapiSendCommand: zero/unaligned transfer 0, no DMA setup
AtapiSendCommand: use_dma=0, Cmd be
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f758068c Command 0xbe to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f758065c
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: wordCount 0x0, WordsTransfered 0x0
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0x0, srb->DataBuffer 0x0, len 0x0
   Transfered 0, full size 0
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xf758065c, status 1
AtapiInterrupt: RequestComplete, srb 0xf758065c
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf75805d0, CDB 0xf7580600, AtaReq 0xb266d000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf75805d0
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 25
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f7580600)
  assume IN
AtapiSendCommand: zero/unaligned transfer 8, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 25
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f7580600 Command 0x25 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x8.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f75805d0
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x51
  base status 0x51
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x51)
AtapiInterrupt: iReason 3
AtapiInterrupt: Error 0x60
  Bad Lba 0x0
  wait 10 ready after ATAPI error
  Intr on DRQ 0
AtapiInterrupt: ATAPI Error, int reason 3
Errors in PIO mode
AtapiInterrupt: Error
AtapiInterrupt: CompleteRequest, srbstatus 4
AtapiInterrupt: Error. Begin mapping...
MapError: Error register is 0x60
ATAPI: Unit attention
AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xf75805d0, status 4
AtapiInterrupt: RequestComplete, srb 0xf75805d0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb266b4e0, CDB 0xb266b510, AtaReq 0xb266d000, SCmd 0x3
UniataNeedQueueing: TopLevel, qd=0
Send to device 3
TopLevel (2), srb 0xb266b4e0
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 3
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b266b510)
  assume IN
AtapiSendCommand: SCSIOP_REQUEST_SENSE, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 3
AtapiSendCommand: SCSIOP_REQUEST_SENSE -> no dma setup (2)
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b266b510 Command 0x3 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x51
  continue with SCSIOP_REQUEST_SENSE
AtapiSendCommand: Entry Status (0x51)
AtapiSendCommand: F:0x0, CntHL:0x0:0x12.
AtapiSendCommand: Poll for int. to send packet. Status (0x51)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b266b4e0
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x12
IdeIntr: Read 0x9 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf750b608, srb->DataBuffer 0xf750b608
70 00 06 00 00 00 00 0a 00 00 00 00 29 00 00 00 
00 00 
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf750b61a, srb->DataBuffer 0xf750b608, len 0x12
   Transfered 12, full size 12
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xb266b4e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb266b4e0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf75805d0, CDB 0xf7580600, AtaReq 0xb266d000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf75805d0
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 25
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f7580600)
  assume IN
AtapiSendCommand: zero/unaligned transfer 8, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 25
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f7580600 Command 0x25 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x8.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f75805d0
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x51
  base status 0x51
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x51)
AtapiInterrupt: iReason 3
AtapiInterrupt: Error 0x20
  Bad Lba 0x0
  wait 10 ready after ATAPI error
  Intr on DRQ 0
AtapiInterrupt: ATAPI Error, int reason 3
Errors in PIO mode
AtapiInterrupt: Error
AtapiInterrupt: CompleteRequest, srbstatus 4
AtapiInterrupt: Error. Begin mapping...
MapError: Error register is 0x20
ATAPI: Device not ready
AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xf75805d0, status 4
AtapiInterrupt: RequestComplete, srb 0xf75805d0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb266b4e0, CDB 0xb266b510, AtaReq 0xb266d000, SCmd 0x3
UniataNeedQueueing: TopLevel, qd=0
Send to device 3
TopLevel (2), srb 0xb266b4e0
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 3
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b266b510)
  assume IN
AtapiSendCommand: SCSIOP_REQUEST_SENSE, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 3
AtapiSendCommand: SCSIOP_REQUEST_SENSE -> no dma setup (2)
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b266b510 Command 0x3 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x51
  continue with SCSIOP_REQUEST_SENSE
AtapiSendCommand: Entry Status (0x51)
AtapiSendCommand: F:0x0, CntHL:0x0:0x12.
AtapiSendCommand: Poll for int. to send packet. Status (0x51)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b266b4e0
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x12
IdeIntr: Read 0x9 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf750b608, srb->DataBuffer 0xf750b608
70 00 02 00 00 00 00 0a 00 00 00 00 3a 00 00 00 
00 00 
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf750b61a, srb->DataBuffer 0xf750b608, len 0x12
   Transfered 12, full size 12
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xb266b4e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb266b4e0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf75805d4, CDB 0xf7580604, AtaReq 0xb266d000, SCmd 0xbd
UniataNeedQueueing: TopLevel, qd=0
Send to device bd
TopLevel (2), srb 0xf75805d4
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send bd
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f7580604)
  assume IN
AtapiSendCommand: zero/unaligned transfer 8, no DMA setup
AtapiSendCommand: use_dma=0, Cmd bd
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f7580604 Command 0xbd to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x8.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f75805d4
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x8
IdeIntr: Read 0x4 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf750c830, srb->DataBuffer 0xf750c830
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: SCSIOP_MECHANISM_STATUS status 0x1
  set DFLAGS_CHANGER_INITED
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf750c838, srb->DataBuffer 0xf750c830, len 0x8
   Transfered 8, full size 8
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xf75805d4, status 1
AtapiInterrupt: RequestComplete, srb 0xf75805d4
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf758065c, CDB 0xf758068c, AtaReq 0xb266d000, SCmd 0x1a
UniataNeedQueueing: TopLevel, qd=0
Send to device 1a
TopLevel (2), srb 0xf758065c
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 1a
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f758068c)
  assume IN
AtapiSendCommand: zero/unaligned transfer 14, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 1a
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f758068c Command 0x1a to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x14.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f758065c
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x51
  base status 0x51
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x51)
AtapiInterrupt: iReason 3
AtapiInterrupt: Error 0x20
  Bad Lba 0x0
  wait 10 ready after ATAPI error
  Intr on DRQ 0
AtapiInterrupt: ATAPI Error, int reason 3
Errors in PIO mode
AtapiInterrupt: Error
AtapiInterrupt: CompleteRequest, srbstatus 4
AtapiInterrupt: Error. Begin mapping...
MapError: Error register is 0x20
ATAPI: Device not ready
AtapiInterrupt: Check for underflow, AtaReq->WordsLeft a
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xf758065c, status 4
AtapiInterrupt: RequestComplete, srb 0xf758065c
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb266b4e0, CDB 0xb266b510, AtaReq 0xb266d000, SCmd 0x3
UniataNeedQueueing: TopLevel, qd=0
Send to device 3
TopLevel (2), srb 0xb266b4e0
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 3
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b266b510)
  assume IN
AtapiSendCommand: SCSIOP_REQUEST_SENSE, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 3
AtapiSendCommand: SCSIOP_REQUEST_SENSE -> no dma setup (2)
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b266b510 Command 0x3 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x51
  continue with SCSIOP_REQUEST_SENSE
AtapiSendCommand: Entry Status (0x51)
AtapiSendCommand: F:0x0, CntHL:0x0:0x12.
AtapiSendCommand: Poll for int. to send packet. Status (0x51)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b266b4e0
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x12
IdeIntr: Read 0x9 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf750b5e8, srb->DataBuffer 0xf750b5e8
70 00 02 00 00 00 00 0a 00 00 00 00 3a 00 00 00 
00 00 
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf750b5fa, srb->DataBuffer 0xf750b5e8, len 0x12
   Transfered 12, full size 12
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xb266b4e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb266b4e0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf758065c, CDB 0xf758068c, AtaReq 0xb266d000, SCmd 0x5a
UniataNeedQueueing: TopLevel, qd=0
Send to device 5a
TopLevel (2), srb 0xf758065c
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 5a
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f758068c)
  assume IN
AtapiSendCommand: zero/unaligned transfer 18, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 5a
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f758068c Command 0x5a to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x18.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f758065c
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x14
AtapiInterrupt: 12 words requested; 10 words xferred
IdeIntr: Read 0xa words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf750c608, srb->DataBuffer 0xf750c608
  status re-check 0x50
AtapiInterrupt: early complete + underrun ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
WordsLeft 0x2 -> SRB_STATUS_DATA_OVERRUN
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf750c61c, srb->DataBuffer 0xf750c608, len 0x18
AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 2
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xf758065c, status 12
AtapiInterrupt: RequestComplete, srb 0xf758065c
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf758065c, CDB 0xf758068c, AtaReq 0xb266d000, SCmd 0xbe
UniataNeedQueueing: TopLevel, qd=0
Send to device be
TopLevel (2), srb 0xf758065c
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send be
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD be (Cdb f758068c)
  assume 0-transfer
AtapiSendCommand: zero/unaligned transfer 0, no DMA setup
AtapiSendCommand: use_dma=0, Cmd be
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f758068c Command 0xbe to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f758065c
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x51
  base status 0x51
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x51)
AtapiInterrupt: iReason 3
AtapiInterrupt: Error 0x20
  Bad Lba 0x0
  wait 10 ready after ATAPI error
  Intr on DRQ 0
AtapiInterrupt: ATAPI Error, int reason 3
Errors in PIO mode
AtapiInterrupt: Error
AtapiInterrupt: CompleteRequest, srbstatus 4
AtapiInterrupt: Error. Begin mapping...
MapError: Error register is 0x20
ATAPI: Device not ready
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xf758065c, status 4
AtapiInterrupt: RequestComplete, srb 0xf758065c
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb266b4e0, CDB 0xb266b510, AtaReq 0xb266d000, SCmd 0x3
UniataNeedQueueing: TopLevel, qd=0
Send to device 3
TopLevel (2), srb 0xb266b4e0
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 3
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b266b510)
  assume IN
AtapiSendCommand: SCSIOP_REQUEST_SENSE, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 3
AtapiSendCommand: SCSIOP_REQUEST_SENSE -> no dma setup (2)
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b266b510 Command 0x3 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x51
  continue with SCSIOP_REQUEST_SENSE
AtapiSendCommand: Entry Status (0x51)
AtapiSendCommand: F:0x0, CntHL:0x0:0x12.
AtapiSendCommand: Poll for int. to send packet. Status (0x51)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b266b4e0
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x12
IdeIntr: Read 0x9 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf750c5e8, srb->DataBuffer 0xf750c5e8
70 00 02 00 00 00 00 0a 00 00 00 00 3a 00 00 00 
00 00 
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf750c5fa, srb->DataBuffer 0xf750c5e8, len 0x12
   Transfered 12, full size 12
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xb266b4e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb266b4e0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf758050c, CDB 0xf758053c, AtaReq 0xb23e9000, SCmd 0x1a
UniataNeedQueueing: TopLevel, qd=0
Send to device 1a
TopLevel (2), srb 0xf758050c
TopLevel (3), AtaReq 0xb23e9000
Try ATAPI send 1a
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f758053c)
  assume IN
AtapiSendCommand: try DMA setup
AtapiSendCommand: use_dma=0, Cmd 1a
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f758053c Command 0x1a to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0xc0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f758050c
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x51
  base status 0x51
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x51)
AtapiInterrupt: iReason 3
AtapiInterrupt: Error 0x64
  Bad Lba 0x0
  wait 10 ready after ATAPI error
  Intr on DRQ 0
AtapiInterrupt: ATAPI Error, int reason 3
Errors in PIO mode
AtapiInterrupt: Error
AtapiInterrupt: CompleteRequest, srbstatus 4
AtapiInterrupt: Error. Begin mapping...
MapError: Error register is 0x64
ATAPI: Unit attention
AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 60
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xf758050c, status 4
AtapiInterrupt: RequestComplete, srb 0xf758050c
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb2393008, CDB 0xb2393038, AtaReq 0xb23e9000, SCmd 0x3
UniataNeedQueueing: TopLevel, qd=0
Send to device 3
TopLevel (2), srb 0xb2393008
TopLevel (3), AtaReq 0xb23e9000
Try ATAPI send 3
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b2393038)
  assume IN
AtapiSendCommand: SCSIOP_REQUEST_SENSE, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 3
AtapiSendCommand: SCSIOP_REQUEST_SENSE -> no dma setup (2)
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b2393038 Command 0x3 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x51
  continue with SCSIOP_REQUEST_SENSE
AtapiSendCommand: Entry Status (0x51)
AtapiSendCommand: F:0x0, CntHL:0x0:0x12.
AtapiSendCommand: Poll for int. to send packet. Status (0x51)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b2393008
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x12
IdeIntr: Read 0x9 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf750b288, srb->DataBuffer 0xf750b288
70 00 06 00 00 00 00 0a 00 00 00 00 29 00 00 00 
00 00 
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf750b29a, srb->DataBuffer 0xf750b288, len 0x12
   Transfered 12, full size 12
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xb2393008, status 1
AtapiInterrupt: RequestComplete, srb 0xb2393008
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf758050c, CDB 0xf758053c, AtaReq 0xb23e9000, SCmd 0x1a
UniataNeedQueueing: TopLevel, qd=0
Send to device 1a
TopLevel (2), srb 0xf758050c
TopLevel (3), AtaReq 0xb23e9000
Try ATAPI send 1a
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f758053c)
  assume IN
AtapiSendCommand: try DMA setup
AtapiSendCommand: use_dma=0, Cmd 1a
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f758053c Command 0x1a to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0xc0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f758050c
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x51
  base status 0x51
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x51)
AtapiInterrupt: iReason 3
AtapiInterrupt: Error 0x54
  Bad Lba 0x0
  wait 10 ready after ATAPI error
  Intr on DRQ 0
AtapiInterrupt: ATAPI Error, int reason 3
Errors in PIO mode
AtapiInterrupt: Error
AtapiInterrupt: CompleteRequest, srbstatus 4
AtapiInterrupt: Error. Begin mapping...
MapError: Error register is 0x54
ATAPI: Illegal request
AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 60
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xf758050c, status 4
AtapiInterrupt: RequestComplete, srb 0xf758050c
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb2393008, CDB 0xb2393038, AtaReq 0xb23e9000, SCmd 0x3
UniataNeedQueueing: TopLevel, qd=0
Send to device 3
TopLevel (2), srb 0xb2393008
TopLevel (3), AtaReq 0xb23e9000
Try ATAPI send 3
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b2393038)
  assume IN
AtapiSendCommand: SCSIOP_REQUEST_SENSE, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 3
AtapiSendCommand: SCSIOP_REQUEST_SENSE -> no dma setup (2)
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b2393038 Command 0x3 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x51
  continue with SCSIOP_REQUEST_SENSE
AtapiSendCommand: Entry Status (0x51)
AtapiSendCommand: F:0x0, CntHL:0x0:0x12.
AtapiSendCommand: Poll for int. to send packet. Status (0x51)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b2393008
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x12
IdeIntr: Read 0x9 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf750b288, srb->DataBuffer 0xf750b288
70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00 
00 00 
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf750b29a, srb->DataBuffer 0xf750b288, len 0x12
   Transfered 12, full size 12
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xb2393008, status 1
AtapiInterrupt: RequestComplete, srb 0xb2393008
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf758050c, CDB 0xf758053c, AtaReq 0xb23e9000, SCmd 0x1a
UniataNeedQueueing: TopLevel, qd=0
Send to device 1a
TopLevel (2), srb 0xf758050c
TopLevel (3), AtaReq 0xb23e9000
Try ATAPI send 1a
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f758053c)
  assume IN
AtapiSendCommand: try DMA setup
AtapiSendCommand: use_dma=0, Cmd 1a
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f758053c Command 0x1a to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0xc0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f758050c
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x51
  base status 0x51
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x51)
AtapiInterrupt: iReason 3
AtapiInterrupt: Error 0x54
  Bad Lba 0x0
  wait 10 ready after ATAPI error
  Intr on DRQ 0
AtapiInterrupt: ATAPI Error, int reason 3
Errors in PIO mode
AtapiInterrupt: Error
AtapiInterrupt: CompleteRequest, srbstatus 4
AtapiInterrupt: Error. Begin mapping...
MapError: Error register is 0x54
ATAPI: Illegal request
AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 60
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xf758050c, status 4
AtapiInterrupt: RequestComplete, srb 0xf758050c
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb2393008, CDB 0xb2393038, AtaReq 0xb23e9000, SCmd 0x3
UniataNeedQueueing: TopLevel, qd=0
Send to device 3
TopLevel (2), srb 0xb2393008
TopLevel (3), AtaReq 0xb23e9000
Try ATAPI send 3
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b2393038)
  assume IN
AtapiSendCommand: SCSIOP_REQUEST_SENSE, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 3
AtapiSendCommand: SCSIOP_REQUEST_SENSE -> no dma setup (2)
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b2393038 Command 0x3 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x51
  continue with SCSIOP_REQUEST_SENSE
AtapiSendCommand: Entry Status (0x51)
AtapiSendCommand: F:0x0, CntHL:0x0:0x12.
AtapiSendCommand: Poll for int. to send packet. Status (0x51)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b2393008
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x12
IdeIntr: Read 0x9 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf750b288, srb->DataBuffer 0xf750b288
70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00 
00 00 
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf750b29a, srb->DataBuffer 0xf750b288, len 0x12
   Transfered 12, full size 12
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xb2393008, status 1
AtapiInterrupt: RequestComplete, srb 0xb2393008
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf7580530, CDB 0xf7580560, AtaReq 0xb23e9000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf7580530
TopLevel (3), AtaReq 0xb23e9000
Try ATAPI send 25
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f7580560)
  assume IN
AtapiSendCommand: zero/unaligned transfer 8, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 25
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f7580560 Command 0x25 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x8.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f7580530
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x51
  base status 0x51
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x51)
AtapiInterrupt: iReason 3
AtapiInterrupt: Error 0x24
  Bad Lba 0x0
  wait 10 ready after ATAPI error
  Intr on DRQ 0
AtapiInterrupt: ATAPI Error, int reason 3
Errors in PIO mode
AtapiInterrupt: Error
AtapiInterrupt: CompleteRequest, srbstatus 4
AtapiInterrupt: Error. Begin mapping...
MapError: Error register is 0x24
ATAPI: Device not ready
AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xf7580530, status 4
AtapiInterrupt: RequestComplete, srb 0xf7580530
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb2393008, CDB 0xb2393038, AtaReq 0xb23e9000, SCmd 0x3
UniataNeedQueueing: TopLevel, qd=0
Send to device 3
TopLevel (2), srb 0xb2393008
TopLevel (3), AtaReq 0xb23e9000
Try ATAPI send 3
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b2393038)
  assume IN
AtapiSendCommand: SCSIOP_REQUEST_SENSE, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 3
AtapiSendCommand: SCSIOP_REQUEST_SENSE -> no dma setup (2)
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b2393038 Command 0x3 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x51
  continue with SCSIOP_REQUEST_SENSE
AtapiSendCommand: Entry Status (0x51)
AtapiSendCommand: F:0x0, CntHL:0x0:0x12.
AtapiSendCommand: Poll for int. to send packet. Status (0x51)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b2393008
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x12
IdeIntr: Read 0x9 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf750b288, srb->DataBuffer 0xf750b288
70 00 02 00 00 00 00 0a 00 00 00 00 3a 00 00 00 
00 00 
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf750b29a, srb->DataBuffer 0xf750b288, len 0x12
   Transfered 12, full size 12
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xb2393008, status 1
AtapiInterrupt: RequestComplete, srb 0xb2393008
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
(../drivers/storage/class/disk/disk.c:1561) Reading beyond partition end! startingOffset: 512, PartitionLength: 0
(../drivers/storage/class/disk/disk.c:1561) Reading beyond partition end! startingOffset: 512, PartitionLength: 0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf75801b0, CDB 0xf75801e0, AtaReq 0xb23e9000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf75801b0
TopLevel (3), AtaReq 0xb23e9000
Try ATAPI send 25
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f75801e0)
  assume IN
AtapiSendCommand: zero/unaligned transfer 8, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 25
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f75801e0 Command 0x25 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x8.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f75801b0
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x51
  base status 0x51
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x51)
AtapiInterrupt: iReason 3
AtapiInterrupt: Error 0x24
  Bad Lba 0x0
  wait 10 ready after ATAPI error
  Intr on DRQ 0
AtapiInterrupt: ATAPI Error, int reason 3
Errors in PIO mode
AtapiInterrupt: Error
AtapiInterrupt: CompleteRequest, srbstatus 4
AtapiInterrupt: Error. Begin mapping...
MapError: Error register is 0x24
ATAPI: Device not ready
AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xf75801b0, status 4
AtapiInterrupt: RequestComplete, srb 0xf75801b0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb2393008, CDB 0xb2393038, AtaReq 0xb23e9000, SCmd 0x3
UniataNeedQueueing: TopLevel, qd=0
Send to device 3
TopLevel (2), srb 0xb2393008
TopLevel (3), AtaReq 0xb23e9000
Try ATAPI send 3
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b2393038)
  assume IN
AtapiSendCommand: SCSIOP_REQUEST_SENSE, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 3
AtapiSendCommand: SCSIOP_REQUEST_SENSE -> no dma setup (2)
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b2393038 Command 0x3 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x51
  continue with SCSIOP_REQUEST_SENSE
AtapiSendCommand: Entry Status (0x51)
AtapiSendCommand: F:0x0, CntHL:0x0:0x12.
AtapiSendCommand: Poll for int. to send packet. Status (0x51)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b2393008
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x12
IdeIntr: Read 0x9 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf750b268, srb->DataBuffer 0xf750b268
70 00 02 00 00 00 00 0a 00 00 00 00 3a 00 00 00 
00 00 
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf750b27a, srb->DataBuffer 0xf750b268, len 0x12
   Transfered 12, full size 12
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xb2393008, status 1
AtapiInterrupt: RequestComplete, srb 0xb2393008
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
(../drivers/storage/class/disk/disk.c:1561) Reading beyond partition end! startingOffset: 512, PartitionLength: 0
(../drivers/storage/class/disk/disk.c:1569) Failing due to device not ready!
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xf758050c, CDB 0xf758053c, AtaReq 0xb2395000, SCmd 0x1a
UniataNeedQueueing: TopLevel, qd=0
Send to device 1a
TopLevel (2), srb 0xf758050c
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7580278
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_MODE_SENSE PATH:LUN:TID = 0x0:0x0:0x0
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xf758050c complete with status 0x6
AtapiStartIo: AtapiDmaDBSync(b26688e0, f758050c)
AtapiStartIo: UniataRemoveRequest(b26688e0, f758050c)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26688e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xf758050c, CDB 0xf758053c, AtaReq 0xb2395000, SCmd 0x1a
UniataNeedQueueing: TopLevel, qd=0
Send to device 1a
TopLevel (2), srb 0xf758050c
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7580278
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_MODE_SENSE PATH:LUN:TID = 0x0:0x0:0x0
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xf758050c complete with status 0x6
AtapiStartIo: AtapiDmaDBSync(b26688e0, f758050c)
AtapiStartIo: UniataRemoveRequest(b26688e0, f758050c)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26688e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xf7580530, CDB 0xf7580560, AtaReq 0xb2395000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf7580530
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7580298
** Ide: Command AtaReq 0xb2395000
** --- **
** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x0:0x0:0x0
** IDE disk 0x0 - #sectors 0x3f, #heads 0xff, #cylinders 0x2601
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xf7580530 complete with status 0x1
AtapiStartIo: AtapiDmaDBSync(b26688e0, f7580530)
AtapiStartIo: UniataRemoveRequest(b26688e0, f7580530)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26688e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23937b8, CDB 0xb23937e8, AtaReq 0xb2395000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23937b8
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7580168
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f750c000, count 200, lCh 0, dev 0
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f750c000)
AtapiVirtToPhysAddr_: f750c000 -> 00000000:04f5f000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b23937b8
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x12, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23937b8, status 1
AtapiInterrupt: RequestComplete, srb 0xb23937b8
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23937b8, CDB 0xb23937e8, AtaReq 0xb2395000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23937b8
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7580078
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f750c000, count 200, lCh 0, dev 0
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f750c000)
AtapiVirtToPhysAddr_: f750c000 -> 00000000:04f5e000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b23937b8
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x12, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23937b8, status 1
AtapiInterrupt: RequestComplete, srb 0xb23937b8
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xf75801b0, CDB 0xf75801e0, AtaReq 0xb2395000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf75801b0
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf757ff18
** Ide: Command AtaReq 0xb2395000
** --- **
** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x0:0x0:0x0
** IDE disk 0x0 - #sectors 0x3f, #heads 0xff, #cylinders 0x2601
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xf75801b0 complete with status 0x1
AtapiStartIo: AtapiDmaDBSync(b26688e0, f75801b0)
AtapiStartIo: UniataRemoveRequest(b26688e0, f75801b0)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26688e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
(../drivers/storage/class/disk/disk.c:2251) HACK: Handling partition 0 request!
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23937b8, CDB 0xb23937e8, AtaReq 0xb2395000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23937b8
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75800e0
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f750ce00, count 200, lCh 0, dev 0
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f750ce00)
AtapiVirtToPhysAddr_: f750ce00 -> 00000000:04f5fe00
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b23937b8
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x12, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23937b8, status 1
AtapiInterrupt: RequestComplete, srb 0xb23937b8
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23937b8, CDB 0xb23937e8, AtaReq 0xb2395000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23937b8
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75800e0
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f750c000, count 200, lCh 0, dev 0
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f750c000)
AtapiVirtToPhysAddr_: f750c000 -> 00000000:04f5e000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b23937b8
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x12, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23937b8, status 1
AtapiInterrupt: RequestComplete, srb 0xb23937b8
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(../ntoskrnl/io/iomgr/driver.c:1648) '\Driver\floppy' initialization failed, status (0xc000000e)
(../ntoskrnl/io/iomgr/driver.c:64) Deleting driver object '\Driver\floppy'
(../drivers/storage/class/ramdisk/ramdisk.c:2438) FIXME: Installing from RamDisk is UNSUPPORTED!
Ext2Fsd -- Version 0.68 Checked -- Nov 20 2016 19:14:09.
Ext2Fsd:~0: 00:16:37:303 b265db18:   Ext2QueryParameters: CodePage not specified.
Ext2Fsd:~0: 00:16:37:318 b265db18:   Ext2QueryParameters: HidingPrefix not specified.
Ext2Fsd:~0: 00:16:37:318 b265db18:   Ext2QueryParameters: HidingSuffix not specified.
Btrfs ERR : read_mappings : ZwCreateKey returned c0000034
Btrfs ERR : read_registry : ZwCreateKey returned c0000034
(../ntoskrnl/io/iomgr/file.c:554) Using IopParseDevice() hack. Requested invalid attributes: 0
(../drivers/storage/class/disk/disk.c:1561) Reading beyond partition end! startingOffset: 69632, PartitionLength: 0
(../ntoskrnl/io/iomgr/file.c:554) Using IopParseDevice() hack. Requested invalid attributes: 0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23930d0, CDB 0xb2393100, AtaReq 0xb2395000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23930d0
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75804c8
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 37dd080, OrigWordsRequested 0x800, DevSize 0x8
IdeReadWrite (REQ): Starting sector is 37dd080, Number of WORDS 0x800, DevSize 0x8
AtapiDmaSetup: mode 0x44, data f74fc000, count 1000, lCh 0, dev 0
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74fc000)
AtapiVirtToPhysAddr_: f74fc000 -> 00000000:04c8d000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x37dd080, Count 0x8(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x37dd080 count 0x8 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b23930d0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x12, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 1000, full size 1000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23930d0, status 1
AtapiInterrupt: RequestComplete, srb 0xb23930d0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(../ntoskrnl/io/iomgr/file.c:554) Using IopParseDevice() hack. Requested invalid attributes: 0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23908e0, CDB 0xb2390910, AtaReq 0xb2395000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23908e0
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75804c8
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector bf, OrigWordsRequested 0x800, DevSize 0x8
IdeReadWrite (REQ): Starting sector is bf, Number of WORDS 0x800, DevSize 0x8
AtapiDmaSetup: mode 0x44, data f74fc000, count 1000, lCh 0, dev 0
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74fc000)
AtapiVirtToPhysAddr_: f74fc000 -> 00000000:04c8d000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0xbf, Count 0x8(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0xbf count 0x8 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b23908e0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x12, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 1000, full size 1000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23908e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb23908e0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(../ntoskrnl/io/iomgr/file.c:554) Using IopParseDevice() hack. Requested invalid attributes: 0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb238f5e8, CDB 0xb238f618, AtaReq 0xb2395000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238f5e8
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75804c8
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3b1080, OrigWordsRequested 0x800, DevSize 0x8
IdeReadWrite (REQ): Starting sector is 3b1080, Number of WORDS 0x800, DevSize 0x8
AtapiDmaSetup: mode 0x44, data f74fc000, count 1000, lCh 0, dev 0
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74fc000)
AtapiVirtToPhysAddr_: f74fc000 -> 00000000:04c8d000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x3b1080, Count 0x8(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x3b1080 count 0x8 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b238f5e8
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x12, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 1000, full size 1000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238f5e8, status 1
AtapiInterrupt: RequestComplete, srb 0xb238f5e8
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(../ntoskrnl/io/iomgr/file.c:554) Using IopParseDevice() hack. Requested invalid attributes: 0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb238f5a0, CDB 0xb238f5d0, AtaReq 0xb2395000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238f5a0
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75804c8
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 1294880, OrigWordsRequested 0x800, DevSize 0x8
IdeReadWrite (REQ): Starting sector is 1294880, Number of WORDS 0x800, DevSize 0x8
AtapiDmaSetup: mode 0x44, data f74fc000, count 1000, lCh 0, dev 0
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74fc000)
AtapiVirtToPhysAddr_: f74fc000 -> 00000000:04c8d000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x1294880, Count 0x8(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x1294880 count 0x8 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b238f5a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x12, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 1000, full size 1000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238f5a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb238f5a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Rfsd 0.26 read-only checked Nov 20 2016 19:14:30
Copyright (C) 1999-2015 Mark Piper, Matt Wu, Bo Branten.
Rfsd: RfsdQueryParameters: WritingSupport=0h
Rfsd: RfsdQueryParameters: CheckingBitmap=0h
Rfsd: RfsdQueryParameters: Ext3ForceWriting=0h
Rfsd: RfsdQueryParameters: CodePage not specified.
RfsdLoadAllNls: succeed to load all codepages ...
Rfsd: User specified codepage (default) was not found.
         Defulat system OEM codepage will be adopted.
ffsdrv -- Version 0.5.2 (ReadOnly) Checked - Built at Nov 20 2016 19:14:20.
FFS: 00:16:38:278 b265db18:   FFSQueryParameters: WritingSupport=0h
FFS: 00:16:38:278 b265db18:   FFSQueryParameters: CheckingBitmap=0h
FFS: 00:16:38:278 b265db18:   FFSQueryParameters: PartitionNumber=0h
(../hal/halx86/legacy/halpnpdd.c:793) Illegal IRP: c
(../hal/halx86/legacy/halpnpdd.c:793) Illegal IRP: c
(../hal/halx86/legacy/halpnpdd.c:793) Illegal IRP: 15
(../ntoskrnl/io/iomgr/file.c:554) Using IopParseDevice() hack. Requested invalid attributes: 0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf7580728, CDB 0xf7580758, AtaReq 0xb23e9000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf7580728
TopLevel (3), AtaReq 0xb23e9000
Try ATAPI send 25
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f7580758)
  assume IN
AtapiSendCommand: zero/unaligned transfer 8, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 25
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f7580758 Command 0x25 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x8.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f7580728
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x51
  base status 0x51
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x51)
AtapiInterrupt: iReason 3
AtapiInterrupt: Error 0x24
  Bad Lba 0x0
  wait 10 ready after ATAPI error
  Intr on DRQ 0
AtapiInterrupt: ATAPI Error, int reason 3
Errors in PIO mode
AtapiInterrupt: Error
AtapiInterrupt: CompleteRequest, srbstatus 4
AtapiInterrupt: Error. Begin mapping...
MapError: Error register is 0x24
ATAPI: Device not ready
AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xf7580728, status 4
AtapiInterrupt: RequestComplete, srb 0xf7580728
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb2390ad8, CDB 0xb2390b08, AtaReq 0xb23e9000, SCmd 0x3
UniataNeedQueueing: TopLevel, qd=0
Send to device 3
TopLevel (2), srb 0xb2390ad8
TopLevel (3), AtaReq 0xb23e9000
Try ATAPI send 3
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b2390b08)
  assume IN
AtapiSendCommand: SCSIOP_REQUEST_SENSE, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 3
AtapiSendCommand: SCSIOP_REQUEST_SENSE -> no dma setup (2)
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b2390b08 Command 0x3 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x51
  continue with SCSIOP_REQUEST_SENSE
AtapiSendCommand: Entry Status (0x51)
AtapiSendCommand: F:0x0, CntHL:0x0:0x12.
AtapiSendCommand: Poll for int. to send packet. Status (0x51)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b2390ad8
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x12
IdeIntr: Read 0x9 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf74fb200, srb->DataBuffer 0xf74fb200
70 00 02 00 00 00 00 0a 00 00 00 00 3a 00 00 00 
00 00 
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf74fb212, srb->DataBuffer 0xf74fb200, len 0x12
   Transfered 12, full size 12
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xb2390ad8, status 1
AtapiInterrupt: RequestComplete, srb 0xb2390ad8
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
(../ntoskrnl/io/iomgr/file.c:554) Using IopParseDevice() hack. Requested invalid attributes: 0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23937b8, CDB 0xb23937e8, AtaReq 0xb2395000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23937b8
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7580538
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f74fc008, count 200, lCh 0, dev 0
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74fc008)
AtapiVirtToPhysAddr_: f74fc008 -> 00000000:04c8c008
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b23937b8
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x12, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23937b8, status 1
AtapiInterrupt: RequestComplete, srb 0xb23937b8
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23937b8, CDB 0xb23937e8, AtaReq 0xb2395000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23937b8
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7580438
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f74fc000, count 200, lCh 0, dev 0
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74fc000)
AtapiVirtToPhysAddr_: f74fc000 -> 00000000:04c8b000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b23937b8
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x12, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23937b8, status 1
AtapiInterrupt: RequestComplete, srb 0xb23937b8
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(../drivers/storage/class/disk/disk.c:2251) HACK: Handling partition 0 request!
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23937b8, CDB 0xb23937e8, AtaReq 0xb2395000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23937b8
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75804a0
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f74fc5f8, count 200, lCh 0, dev 0
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74fc5f8)
AtapiVirtToPhysAddr_: f74fc5f8 -> 00000000:04c8c5f8
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b23937b8
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x12, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23937b8, status 1
AtapiInterrupt: RequestComplete, srb 0xb23937b8
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23937b8, CDB 0xb23937e8, AtaReq 0xb2395000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23937b8
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7580588
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f74fc000, count 200, lCh 0, dev 0
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74fc000)
AtapiVirtToPhysAddr_: f74fc000 -> 00000000:04c8b000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b23937b8
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x12, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23937b8, status 1
AtapiInterrupt: RequestComplete, srb 0xb23937b8
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23937b8, CDB 0xb23937e8, AtaReq 0xb2395000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23937b8
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75805f0
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f74fc008, count 200, lCh 0, dev 0
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74fc008)
AtapiVirtToPhysAddr_: f74fc008 -> 00000000:04c8c008
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b23937b8
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x12, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23937b8, status 1
AtapiInterrupt: RequestComplete, srb 0xb23937b8
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238f280, CDB 0xb238f2b0, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238f280
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238f2b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0xc, data f74fc008, count 800, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74fc008)
AtapiVirtToPhysAddr_: f74fc008 -> 00000000:04c8c008
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 1 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: restore IO mode on Device 0, last dev 1
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
Intel 0
AtaSetTransferMode: Set 0x42 on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x42 feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238f2b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x8:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x41, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238f280
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  DmaTransfer + !BM_STATUS_INTR (1)
  getting status...
  status 0xc0
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 800, full size 800
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238f280, status 1
AtapiInterrupt: RequestComplete, srb 0xb238f280
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238e140, CDB 0xb238e170, AtaReq 0xb266d000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xb238e140
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 25
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb b238e170)
  assume IN
AtapiSendCommand: zero/unaligned transfer 8, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 25
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiDmaReinit: set PIO mode on Device 0 (42 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
Intel 0
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238e170 Command 0x25 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x8.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238e140
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x8
IdeIntr: Read 0x4 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xb267f5d8, srb->DataBuffer 0xb267f5d8
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xb267f5e0, srb->DataBuffer 0xb267f5d8, len 0x8
   Transfered 8, full size 8
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238e140, status 1
AtapiInterrupt: RequestComplete, srb 0xb238e140
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238f280, CDB 0xb238f2b0, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238f280
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238f2b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0xc, data f74fc018, count 800, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74fc018)
AtapiVirtToPhysAddr_: f74fc018 -> 00000000:001d7018
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 1 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
Intel 0
AtaSetTransferMode: Set 0x42 on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x42 feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238f2b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x8:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x41, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238f280
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 800, full size 800
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238f280, status 1
AtapiInterrupt: RequestComplete, srb 0xb238f280
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238e140, CDB 0xb238e170, AtaReq 0xb266d000, SCmd 0x43
UniataNeedQueueing: TopLevel, qd=0
Send to device 43
TopLevel (2), srb 0xb238e140
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 43
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 43 (Cdb b238e170)
  assume IN
AtapiSendCommand: zero/unaligned transfer 324, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 43
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiDmaReinit: set PIO mode on Device 0 (42 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
Intel 0
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238e170 Command 0x43 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x3:0x24.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238e140
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x14
AtapiInterrupt: 402 words requested; 10 words xferred
IdeIntr: Read 0xa words
IdeIntr: PIO Read AtaReq->DataBuffer 0xb238c900, srb->DataBuffer 0xb238c900
  status re-check 0x50
AtapiInterrupt: early complete + underrun ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
WordsLeft 0x188 -> SRB_STATUS_DATA_OVERRUN
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xb238c914, srb->DataBuffer 0xb238c900, len 0x324
AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 188
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xb238e140, status 12
AtapiInterrupt: RequestComplete, srb 0xb238e140
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238f280, CDB 0xb238f2b0, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238f280
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238f2b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0xc, data f74fc008, count 800, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74fc008)
AtapiVirtToPhysAddr_: f74fc008 -> 00000000:04c8a008
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 1 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
Intel 0
AtaSetTransferMode: Set 0x42 on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x42 feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238f2b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x8:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x41, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238f280
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 800, full size 800
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238f280, status 1
AtapiInterrupt: RequestComplete, srb 0xb238f280
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238f280, CDB 0xb238f2b0, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238f280
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238f2b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f74fc008, count 800, lCh 0, dev 0
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74fc008)
AtapiVirtToPhysAddr_: f74fc008 -> 00000000:04c8a008
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 1 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238f2b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x8:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238f280
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 800, full size 800
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238f280, status 1
AtapiInterrupt: RequestComplete, srb 0xb238f280
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238f280, CDB 0xb238f2b0, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238f280
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238f2b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f74fc008, count 800, lCh 0, dev 0
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74fc008)
AtapiVirtToPhysAddr_: f74fc008 -> 00000000:04c8a008
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 1 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238f2b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x8:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238f280
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 800, full size 800
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238f280, status 1
AtapiInterrupt: RequestComplete, srb 0xb238f280
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238f280, CDB 0xb238f2b0, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238f280
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238f2b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f74fc008, count 800, lCh 0, dev 0
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74fc008)
AtapiVirtToPhysAddr_: f74fc008 -> 00000000:04c8a008
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 1 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238f2b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x8:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238f280
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 800, full size 800
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238f280, status 1
AtapiInterrupt: RequestComplete, srb 0xb238f280
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238e140, CDB 0xb238e170, AtaReq 0xb266d000, SCmd 0x0
UniataNeedQueueing: TopLevel, qd=0
Send to device 0
TopLevel (2), srb 0xb238e140
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 0
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b238e170)
  assume 0-transfer
AtapiSendCommand: zero/unaligned transfer 0, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 0
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiDmaReinit: set PIO mode on Device 0 (42 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
Intel 0
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238e170 Command 0x0 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238e140
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: wordCount 0x0, WordsTransfered 0x0
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0x0, srb->DataBuffer 0x0, len 0x0
   Transfered 0, full size 0
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238e140, status 1
AtapiInterrupt: RequestComplete, srb 0xb238e140
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238f280, CDB 0xb238f2b0, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238f280
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238f2b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0xc, data f74bd000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74bd000)
AtapiVirtToPhysAddr_: f74bd000 -> 00000000:001b8000
  get Phys(data[n=1+1000]=f74be000)
AtapiVirtToPhysAddr_: f74be000 -> 00000000:001d2000
  get Phys(data[n=2+1000]=f74bf000)
AtapiVirtToPhysAddr_: f74bf000 -> 00000000:001cb000
  get Phys(data[n=3+1000]=f74c0000)
AtapiVirtToPhysAddr_: f74c0000 -> 00000000:001cc000
  get Phys(data[n=3+2000]=f74c1000)
AtapiVirtToPhysAddr_: f74c1000 -> 00000000:001cd000
  get Phys(data[n=3+3000]=f74c2000)
AtapiVirtToPhysAddr_: f74c2000 -> 00000000:001ce000
  get Phys(data[n=3+4000]=f74c3000)
AtapiVirtToPhysAddr_: f74c3000 -> 00000000:001cf000
  get Phys(data[n=3+5000]=f74c4000)
AtapiVirtToPhysAddr_: f74c4000 -> 00000000:001b0000
  get Phys(data[n=4+1000]=f74c5000)
AtapiVirtToPhysAddr_: f74c5000 -> 00000000:001c1000
  get Phys(data[n=5+1000]=f74c6000)
AtapiVirtToPhysAddr_: f74c6000 -> 00000000:001ca000
  get Phys(data[n=6+1000]=f74c7000)
AtapiVirtToPhysAddr_: f74c7000 -> 00000000:001c3000
  get Phys(data[n=7+1000]=f74c8000)
AtapiVirtToPhysAddr_: f74c8000 -> 00000000:001c4000
  get Phys(data[n=7+2000]=f74c9000)
AtapiVirtToPhysAddr_: f74c9000 -> 00000000:001c5000
  get Phys(data[n=7+3000]=f74ca000)
AtapiVirtToPhysAddr_: f74ca000 -> 00000000:001c6000
  get Phys(data[n=7+4000]=f74cb000)
AtapiVirtToPhysAddr_: f74cb000 -> 00000000:001c7000
  get Phys(data[n=7+5000]=f74cc000)
AtapiVirtToPhysAddr_: f74cc000 -> 00000000:001a8000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 8 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
Intel 0
AtaSetTransferMode: Set 0x42 on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x42 feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238f2b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x41, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238f280
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  DmaTransfer + !BM_STATUS_INTR (1)
  getting status...
  status 0xd0
  special case DMA + ATAPI + IDE_STATUS_DSC -> our
  ATAPI status 0xd0
  ATAPI additional check
  status re-check 0xd0
  Error reg (0xd0)
  still BUSY, seems it is not our
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238f280, status 1
AtapiInterrupt: RequestComplete, srb 0xb238f280
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238e140, CDB 0xb238e170, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238e140
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238e170)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f74cd000, count 10000, lCh 0, dev 0
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74cd000)
AtapiVirtToPhysAddr_: f74cd000 -> 00000000:001b9000
  get Phys(data[n=1+1000]=f74ce000)
AtapiVirtToPhysAddr_: f74ce000 -> 00000000:001c2000
  get Phys(data[n=2+1000]=f74cf000)
AtapiVirtToPhysAddr_: f74cf000 -> 00000000:001bb000
  get Phys(data[n=3+1000]=f74d0000)
AtapiVirtToPhysAddr_: f74d0000 -> 00000000:001bc000
  get Phys(data[n=3+2000]=f74d1000)
AtapiVirtToPhysAddr_: f74d1000 -> 00000000:001bd000
  get Phys(data[n=3+3000]=f74d2000)
AtapiVirtToPhysAddr_: f74d2000 -> 00000000:001be000
  get Phys(data[n=3+4000]=f74d3000)
AtapiVirtToPhysAddr_: f74d3000 -> 00000000:001bf000
  get Phys(data[n=3+5000]=f74d4000)
AtapiVirtToPhysAddr_: f74d4000 -> 00000000:001a0000
  get Phys(data[n=4+1000]=f74d5000)
AtapiVirtToPhysAddr_: f74d5000 -> 00000000:001b1000
  get Phys(data[n=5+1000]=f74d6000)
AtapiVirtToPhysAddr_: f74d6000 -> 00000000:001ba000
  get Phys(data[n=6+1000]=f74d7000)
AtapiVirtToPhysAddr_: f74d7000 -> 00000000:001b3000
  get Phys(data[n=7+1000]=f74d8000)
AtapiVirtToPhysAddr_: f74d8000 -> 00000000:001b4000
  get Phys(data[n=7+2000]=f74d9000)
AtapiVirtToPhysAddr_: f74d9000 -> 00000000:001b5000
  get Phys(data[n=7+3000]=f74da000)
AtapiVirtToPhysAddr_: f74da000 -> 00000000:001b6000
  get Phys(data[n=7+4000]=f74db000)
AtapiVirtToPhysAddr_: f74db000 -> 00000000:001b7000
  get Phys(data[n=7+5000]=f74dc000)
AtapiVirtToPhysAddr_: f74dc000 -> 00000000:00198000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 8 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238e170 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238e140
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238e140, status 1
AtapiInterrupt: RequestComplete, srb 0xb238e140
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238c638, CDB 0xb238c668, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238c638
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238c668)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f74dd000, count 10000, lCh 0, dev 0
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74dd000)
AtapiVirtToPhysAddr_: f74dd000 -> 00000000:001a9000
  get Phys(data[n=1+1000]=f74de000)
AtapiVirtToPhysAddr_: f74de000 -> 00000000:001b2000
  get Phys(data[n=2+1000]=f74df000)
AtapiVirtToPhysAddr_: f74df000 -> 00000000:001ab000
  get Phys(data[n=3+1000]=f74e0000)
AtapiVirtToPhysAddr_: f74e0000 -> 00000000:001ac000
  get Phys(data[n=3+2000]=f74e1000)
AtapiVirtToPhysAddr_: f74e1000 -> 00000000:001ad000
  get Phys(data[n=3+3000]=f74e2000)
AtapiVirtToPhysAddr_: f74e2000 -> 00000000:001ae000
  get Phys(data[n=3+4000]=f74e3000)
AtapiVirtToPhysAddr_: f74e3000 -> 00000000:001af000
  get Phys(data[n=3+5000]=f74e4000)
AtapiVirtToPhysAddr_: f74e4000 -> 00000000:00190000
  get Phys(data[n=4+1000]=f74e5000)
AtapiVirtToPhysAddr_: f74e5000 -> 00000000:001a1000
  get Phys(data[n=5+1000]=f74e6000)
AtapiVirtToPhysAddr_: f74e6000 -> 00000000:001aa000
  get Phys(data[n=6+1000]=f74e7000)
AtapiVirtToPhysAddr_: f74e7000 -> 00000000:001a3000
  get Phys(data[n=7+1000]=f74e8000)
AtapiVirtToPhysAddr_: f74e8000 -> 00000000:001a4000
  get Phys(data[n=7+2000]=f74e9000)
AtapiVirtToPhysAddr_: f74e9000 -> 00000000:001a5000
  get Phys(data[n=7+3000]=f74ea000)
AtapiVirtToPhysAddr_: f74ea000 -> 00000000:001a6000
  get Phys(data[n=7+4000]=f74eb000)
AtapiVirtToPhysAddr_: f74eb000 -> 00000000:001a7000
  get Phys(data[n=7+5000]=f74ec000)
AtapiVirtToPhysAddr_: f74ec000 -> 00000000:00188000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 8 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238c668 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238c638
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238c638, status 1
AtapiInterrupt: RequestComplete, srb 0xb238c638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238c998, CDB 0xb238c9c8, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238c998
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238c9c8)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f74ed000, count 10000, lCh 0, dev 0
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74ed000)
AtapiVirtToPhysAddr_: f74ed000 -> 00000000:00199000
  get Phys(data[n=1+1000]=f74ee000)
AtapiVirtToPhysAddr_: f74ee000 -> 00000000:001a2000
  get Phys(data[n=2+1000]=f74ef000)
AtapiVirtToPhysAddr_: f74ef000 -> 00000000:0019b000
  get Phys(data[n=3+1000]=f74f0000)
AtapiVirtToPhysAddr_: f74f0000 -> 00000000:0019c000
  get Phys(data[n=3+2000]=f74f1000)
AtapiVirtToPhysAddr_: f74f1000 -> 00000000:0019d000
  get Phys(data[n=3+3000]=f74f2000)
AtapiVirtToPhysAddr_: f74f2000 -> 00000000:0019e000
  get Phys(data[n=3+4000]=f74f3000)
AtapiVirtToPhysAddr_: f74f3000 -> 00000000:0019f000
  get Phys(data[n=3+5000]=f74f4000)
AtapiVirtToPhysAddr_: f74f4000 -> 00000000:00180000
  get Phys(data[n=4+1000]=f74f5000)
AtapiVirtToPhysAddr_: f74f5000 -> 00000000:00191000
  get Phys(data[n=5+1000]=f74f6000)
AtapiVirtToPhysAddr_: f74f6000 -> 00000000:0019a000
  get Phys(data[n=6+1000]=f74f7000)
AtapiVirtToPhysAddr_: f74f7000 -> 00000000:00193000
  get Phys(data[n=7+1000]=f74f8000)
AtapiVirtToPhysAddr_: f74f8000 -> 00000000:00194000
  get Phys(data[n=7+2000]=f74f9000)
AtapiVirtToPhysAddr_: f74f9000 -> 00000000:00195000
  get Phys(data[n=7+3000]=f74fa000)
AtapiVirtToPhysAddr_: f74fa000 -> 00000000:00196000
  get Phys(data[n=7+4000]=f74fb000)
AtapiVirtToPhysAddr_: f74fb000 -> 00000000:00197000
  get Phys(data[n=7+5000]=f74fc000)
AtapiVirtToPhysAddr_: f74fc000 -> 00000000:00178000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 8 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238c9c8 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238c998
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238c998, status 1
AtapiInterrupt: RequestComplete, srb 0xb238c998
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(../ntoskrnl/io/iomgr/file.c:554) Using IopParseDevice() hack. Requested invalid attributes: 1
(../ntoskrnl/io/iomgr/file.c:554) Using IopParseDevice() hack. Requested invalid attributes: 1
(../ntoskrnl/io/iomgr/file.c:554) Using IopParseDevice() hack. Requested invalid attributes: 0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf75808f8, CDB 0xf7580928, AtaReq 0xb23e9000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf75808f8
TopLevel (3), AtaReq 0xb23e9000
Try ATAPI send 25
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f7580928)
  assume IN
AtapiSendCommand: zero/unaligned transfer 8, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 25
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f7580928 Command 0x25 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x8.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f75808f8
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x51
  base status 0x51
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x51)
AtapiInterrupt: iReason 3
AtapiInterrupt: Error 0x24
  Bad Lba 0x0
  wait 10 ready after ATAPI error
  Intr on DRQ 0
AtapiInterrupt: ATAPI Error, int reason 3
Errors in PIO mode
AtapiInterrupt: Error
AtapiInterrupt: CompleteRequest, srbstatus 4
AtapiInterrupt: Error. Begin mapping...
MapError: Error register is 0x24
ATAPI: Device not ready
AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xf75808f8, status 4
AtapiInterrupt: RequestComplete, srb 0xf75808f8
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238c210, CDB 0xb238c240, AtaReq 0xb23e9000, SCmd 0x3
UniataNeedQueueing: TopLevel, qd=0
Send to device 3
TopLevel (2), srb 0xb238c210
TopLevel (3), AtaReq 0xb23e9000
Try ATAPI send 3
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b238c240)
  assume IN
AtapiSendCommand: SCSIOP_REQUEST_SENSE, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 3
AtapiSendCommand: SCSIOP_REQUEST_SENSE -> no dma setup (2)
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238c240 Command 0x3 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x51
  continue with SCSIOP_REQUEST_SENSE
AtapiSendCommand: Entry Status (0x51)
AtapiSendCommand: F:0x0, CntHL:0x0:0x12.
AtapiSendCommand: Poll for int. to send packet. Status (0x51)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238c210
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x12
IdeIntr: Read 0x9 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf74fb200, srb->DataBuffer 0xf74fb200
70 00 02 00 00 00 00 0a 00 00 00 00 3a 00 00 00 
00 00 
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf74fb212, srb->DataBuffer 0xf74fb200, len 0x12
   Transfered 12, full size 12
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xb238c210, status 1
AtapiInterrupt: RequestComplete, srb 0xb238c210
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
(../ntoskrnl/io/iomgr/file.c:554) Using IopParseDevice() hack. Requested invalid attributes: 0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23937b8, CDB 0xb23937e8, AtaReq 0xb2395000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23937b8
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7580668
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f74fc000, count 200, lCh 0, dev 0
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74fc000)
AtapiVirtToPhysAddr_: f74fc000 -> 00000000:04c88000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b23937b8
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x12, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23937b8, status 1
AtapiInterrupt: RequestComplete, srb 0xb23937b8
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(../drivers/storage/class/disk/disk.c:2251) HACK: Handling partition 0 request!
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23937b8, CDB 0xb23937e8, AtaReq 0xb2395000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23937b8
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75806d0
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f74fca28, count 200, lCh 0, dev 0
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74fca28)
AtapiVirtToPhysAddr_: f74fca28 -> 00000000:04c8ba28
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b23937b8
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x12, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23937b8, status 1
AtapiInterrupt: RequestComplete, srb 0xb23937b8
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb2680820, CDB 0xb2680850, AtaReq 0xb266d000, SCmd 0x0
UniataNeedQueueing: TopLevel, qd=0
Send to device 0
TopLevel (2), srb 0xb2680820
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 0
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2680850)
  assume 0-transfer
AtapiSendCommand: zero/unaligned transfer 0, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 0
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiDmaReinit: set PIO mode on Device 0 (42 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
Intel 0
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b2680850 Command 0x0 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b2680820
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: wordCount 0x0, WordsTransfered 0x0
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0x0, srb->DataBuffer 0x0, len 0x0
   Transfered 0, full size 0
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb2680820, status 1
AtapiInterrupt: RequestComplete, srb 0xb2680820
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238c998, CDB 0xb238c9c8, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238c998
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238c9c8)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0xc, data f74bc000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74bc000)
AtapiVirtToPhysAddr_: f74bc000 -> 00000000:0018e000
  get Phys(data[n=1+1000]=f74bd000)
AtapiVirtToPhysAddr_: f74bd000 -> 00000000:0018f000
  get Phys(data[n=1+2000]=f74be000)
AtapiVirtToPhysAddr_: f74be000 -> 00000000:00170000
  get Phys(data[n=2+1000]=f74bf000)
AtapiVirtToPhysAddr_: f74bf000 -> 00000000:00181000
  get Phys(data[n=3+1000]=f74c0000)
AtapiVirtToPhysAddr_: f74c0000 -> 00000000:0018a000
  get Phys(data[n=4+1000]=f74c1000)
AtapiVirtToPhysAddr_: f74c1000 -> 00000000:00183000
  get Phys(data[n=5+1000]=f74c2000)
AtapiVirtToPhysAddr_: f74c2000 -> 00000000:00184000
  get Phys(data[n=5+2000]=f74c3000)
AtapiVirtToPhysAddr_: f74c3000 -> 00000000:00185000
  get Phys(data[n=5+3000]=f74c4000)
AtapiVirtToPhysAddr_: f74c4000 -> 00000000:00186000
  get Phys(data[n=5+4000]=f74c5000)
AtapiVirtToPhysAddr_: f74c5000 -> 00000000:00187000
  get Phys(data[n=5+5000]=f74c6000)
AtapiVirtToPhysAddr_: f74c6000 -> 00000000:00168000
  get Phys(data[n=6+1000]=f74c7000)
AtapiVirtToPhysAddr_: f74c7000 -> 00000000:00179000
  get Phys(data[n=7+1000]=f74c8000)
AtapiVirtToPhysAddr_: f74c8000 -> 00000000:00182000
  get Phys(data[n=8+1000]=f74c9000)
AtapiVirtToPhysAddr_: f74c9000 -> 00000000:0017b000
  get Phys(data[n=9+1000]=f74ca000)
AtapiVirtToPhysAddr_: f74ca000 -> 00000000:0017c000
  get Phys(data[n=9+2000]=f74cb000)
AtapiVirtToPhysAddr_: f74cb000 -> 00000000:0017d000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 9 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
Intel 0
AtaSetTransferMode: Set 0x42 on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x42 feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238c9c8 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x41, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238c998
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  DmaTransfer + !BM_STATUS_INTR (1)
  getting status...
  status 0xc0
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238c998, status 1
AtapiInterrupt: RequestComplete, srb 0xb238c998
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238c638, CDB 0xb238c668, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238c638
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238c668)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f74cc000, count 10000, lCh 0, dev 0
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74cc000)
AtapiVirtToPhysAddr_: f74cc000 -> 00000000:0017e000
  get Phys(data[n=1+1000]=f74cd000)
AtapiVirtToPhysAddr_: f74cd000 -> 00000000:0017f000
  get Phys(data[n=1+2000]=f74ce000)
AtapiVirtToPhysAddr_: f74ce000 -> 00000000:00160000
  get Phys(data[n=2+1000]=f74cf000)
AtapiVirtToPhysAddr_: f74cf000 -> 00000000:00171000
  get Phys(data[n=3+1000]=f74d0000)
AtapiVirtToPhysAddr_: f74d0000 -> 00000000:0017a000
  get Phys(data[n=4+1000]=f74d1000)
AtapiVirtToPhysAddr_: f74d1000 -> 00000000:00173000
  get Phys(data[n=5+1000]=f74d2000)
AtapiVirtToPhysAddr_: f74d2000 -> 00000000:00174000
  get Phys(data[n=5+2000]=f74d3000)
AtapiVirtToPhysAddr_: f74d3000 -> 00000000:00175000
  get Phys(data[n=5+3000]=f74d4000)
AtapiVirtToPhysAddr_: f74d4000 -> 00000000:00176000
  get Phys(data[n=5+4000]=f74d5000)
AtapiVirtToPhysAddr_: f74d5000 -> 00000000:00177000
  get Phys(data[n=5+5000]=f74d6000)
AtapiVirtToPhysAddr_: f74d6000 -> 00000000:00158000
  get Phys(data[n=6+1000]=f74d7000)
AtapiVirtToPhysAddr_: f74d7000 -> 00000000:00169000
  get Phys(data[n=7+1000]=f74d8000)
AtapiVirtToPhysAddr_: f74d8000 -> 00000000:00172000
  get Phys(data[n=8+1000]=f74d9000)
AtapiVirtToPhysAddr_: f74d9000 -> 00000000:0016b000
  get Phys(data[n=9+1000]=f74da000)
AtapiVirtToPhysAddr_: f74da000 -> 00000000:0016c000
  get Phys(data[n=9+2000]=f74db000)
AtapiVirtToPhysAddr_: f74db000 -> 00000000:0016d000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 9 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238c668 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238c638
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238c638, status 1
AtapiInterrupt: RequestComplete, srb 0xb238c638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238e140, CDB 0xb238e170, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238e140
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238e170)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f74dc000, count 10000, lCh 0, dev 0
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74dc000)
AtapiVirtToPhysAddr_: f74dc000 -> 00000000:0016e000
  get Phys(data[n=1+1000]=f74dd000)
AtapiVirtToPhysAddr_: f74dd000 -> 00000000:0016f000
  get Phys(data[n=1+2000]=f74de000)
AtapiVirtToPhysAddr_: f74de000 -> 00000000:00150000
  get Phys(data[n=2+1000]=f74df000)
AtapiVirtToPhysAddr_: f74df000 -> 00000000:00161000
  get Phys(data[n=3+1000]=f74e0000)
AtapiVirtToPhysAddr_: f74e0000 -> 00000000:0016a000
  get Phys(data[n=4+1000]=f74e1000)
AtapiVirtToPhysAddr_: f74e1000 -> 00000000:00163000
  get Phys(data[n=5+1000]=f74e2000)
AtapiVirtToPhysAddr_: f74e2000 -> 00000000:00164000
  get Phys(data[n=5+2000]=f74e3000)
AtapiVirtToPhysAddr_: f74e3000 -> 00000000:00165000
  get Phys(data[n=5+3000]=f74e4000)
AtapiVirtToPhysAddr_: f74e4000 -> 00000000:00166000
  get Phys(data[n=5+4000]=f74e5000)
AtapiVirtToPhysAddr_: f74e5000 -> 00000000:00167000
  get Phys(data[n=5+5000]=f74e6000)
AtapiVirtToPhysAddr_: f74e6000 -> 00000000:00148000
  get Phys(data[n=6+1000]=f74e7000)
AtapiVirtToPhysAddr_: f74e7000 -> 00000000:00159000
  get Phys(data[n=7+1000]=f74e8000)
AtapiVirtToPhysAddr_: f74e8000 -> 00000000:00162000
  get Phys(data[n=8+1000]=f74e9000)
AtapiVirtToPhysAddr_: f74e9000 -> 00000000:0015b000
  get Phys(data[n=9+1000]=f74ea000)
AtapiVirtToPhysAddr_: f74ea000 -> 00000000:0015c000
  get Phys(data[n=9+2000]=f74eb000)
AtapiVirtToPhysAddr_: f74eb000 -> 00000000:0015d000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 9 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238e170 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238e140
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238e140, status 1
AtapiInterrupt: RequestComplete, srb 0xb238e140
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238f280, CDB 0xb238f2b0, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238f280
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238f2b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f74ec000, count 10000, lCh 0, dev 0
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74ec000)
AtapiVirtToPhysAddr_: f74ec000 -> 00000000:0015e000
  get Phys(data[n=1+1000]=f74ed000)
AtapiVirtToPhysAddr_: f74ed000 -> 00000000:0015f000
  get Phys(data[n=1+2000]=f74ee000)
AtapiVirtToPhysAddr_: f74ee000 -> 00000000:00140000
  get Phys(data[n=2+1000]=f74ef000)
AtapiVirtToPhysAddr_: f74ef000 -> 00000000:00151000
  get Phys(data[n=3+1000]=f74f0000)
AtapiVirtToPhysAddr_: f74f0000 -> 00000000:0015a000
  get Phys(data[n=4+1000]=f74f1000)
AtapiVirtToPhysAddr_: f74f1000 -> 00000000:00153000
  get Phys(data[n=5+1000]=f74f2000)
AtapiVirtToPhysAddr_: f74f2000 -> 00000000:00154000
  get Phys(data[n=5+2000]=f74f3000)
AtapiVirtToPhysAddr_: f74f3000 -> 00000000:00155000
  get Phys(data[n=5+3000]=f74f4000)
AtapiVirtToPhysAddr_: f74f4000 -> 00000000:00156000
  get Phys(data[n=5+4000]=f74f5000)
AtapiVirtToPhysAddr_: f74f5000 -> 00000000:00157000
  get Phys(data[n=5+5000]=f74f6000)
AtapiVirtToPhysAddr_: f74f6000 -> 00000000:00138000
  get Phys(data[n=6+1000]=f74f7000)
AtapiVirtToPhysAddr_: f74f7000 -> 00000000:00149000
  get Phys(data[n=7+1000]=f74f8000)
AtapiVirtToPhysAddr_: f74f8000 -> 00000000:00152000
  get Phys(data[n=8+1000]=f74f9000)
AtapiVirtToPhysAddr_: f74f9000 -> 00000000:0014b000
  get Phys(data[n=9+1000]=f74fa000)
AtapiVirtToPhysAddr_: f74fa000 -> 00000000:0014c000
  get Phys(data[n=9+2000]=f74fb000)
AtapiVirtToPhysAddr_: f74fb000 -> 00000000:0014d000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 9 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238f2b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238f280
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238f280, status 1
AtapiInterrupt: RequestComplete, srb 0xb238f280
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238f280, CDB 0xb238f2b0, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238f280
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238f2b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f74f9000, count 2000, lCh 0, dev 0
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74f9000)
AtapiVirtToPhysAddr_: f74f9000 -> 00000000:0014e000
  get Phys(data[n=1+1000]=f74fa000)
AtapiVirtToPhysAddr_: f74fa000 -> 00000000:0014f000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 1 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238f2b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x20:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238f280
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238f280, status 1
AtapiInterrupt: RequestComplete, srb 0xb238f280
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238f280, CDB 0xb238f2b0, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238f280
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238f2b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f74bd000, count 10000, lCh 0, dev 0
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74bd000)
AtapiVirtToPhysAddr_: f74bd000 -> 00000000:0013b000
  get Phys(data[n=1+1000]=f74be000)
AtapiVirtToPhysAddr_: f74be000 -> 00000000:00144000
  get Phys(data[n=2+1000]=f74bf000)
AtapiVirtToPhysAddr_: f74bf000 -> 00000000:00145000
  get Phys(data[n=2+2000]=f74c0000)
AtapiVirtToPhysAddr_: f74c0000 -> 00000000:00146000
  get Phys(data[n=2+3000]=f74c1000)
AtapiVirtToPhysAddr_: f74c1000 -> 00000000:00147000
  get Phys(data[n=2+4000]=f74c2000)
AtapiVirtToPhysAddr_: f74c2000 -> 00000000:00128000
  get Phys(data[n=3+1000]=f74c3000)
AtapiVirtToPhysAddr_: f74c3000 -> 00000000:00139000
  get Phys(data[n=4+1000]=f74c4000)
AtapiVirtToPhysAddr_: f74c4000 -> 00000000:0013a000
  get Phys(data[n=4+2000]=f74c5000)
AtapiVirtToPhysAddr_: f74c5000 -> 00000000:00133000
  get Phys(data[n=5+1000]=f74c6000)
AtapiVirtToPhysAddr_: f74c6000 -> 00000000:0013c000
  get Phys(data[n=6+1000]=f74c7000)
AtapiVirtToPhysAddr_: f74c7000 -> 00000000:0013d000
  get Phys(data[n=6+2000]=f74c8000)
AtapiVirtToPhysAddr_: f74c8000 -> 00000000:0013e000
  get Phys(data[n=6+3000]=f74c9000)
AtapiVirtToPhysAddr_: f74c9000 -> 00000000:0013f000
  get Phys(data[n=6+4000]=f74ca000)
AtapiVirtToPhysAddr_: f74ca000 -> 00000000:00120000
  get Phys(data[n=7+1000]=f74cb000)
AtapiVirtToPhysAddr_: f74cb000 -> 00000000:00131000
  get Phys(data[n=8+1000]=f74cc000)
AtapiVirtToPhysAddr_: f74cc000 -> 00000000:00132000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 8 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238f2b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238f280
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238f280, status 1
AtapiInterrupt: RequestComplete, srb 0xb238f280
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238e140, CDB 0xb238e170, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238e140
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238e170)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f74cd000, count 10000, lCh 0, dev 0
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74cd000)
AtapiVirtToPhysAddr_: f74cd000 -> 00000000:0012b000
  get Phys(data[n=1+1000]=f74ce000)
AtapiVirtToPhysAddr_: f74ce000 -> 00000000:00134000
  get Phys(data[n=2+1000]=f74cf000)
AtapiVirtToPhysAddr_: f74cf000 -> 00000000:00135000
  get Phys(data[n=2+2000]=f74d0000)
AtapiVirtToPhysAddr_: f74d0000 -> 00000000:00136000
  get Phys(data[n=2+3000]=f74d1000)
AtapiVirtToPhysAddr_: f74d1000 -> 00000000:00137000
  get Phys(data[n=2+4000]=f74d2000)
AtapiVirtToPhysAddr_: f74d2000 -> 00000000:00118000
  get Phys(data[n=3+1000]=f74d3000)
AtapiVirtToPhysAddr_: f74d3000 -> 00000000:00129000
  get Phys(data[n=4+1000]=f74d4000)
AtapiVirtToPhysAddr_: f74d4000 -> 00000000:0012a000
  get Phys(data[n=4+2000]=f74d5000)
AtapiVirtToPhysAddr_: f74d5000 -> 00000000:00123000
  get Phys(data[n=5+1000]=f74d6000)
AtapiVirtToPhysAddr_: f74d6000 -> 00000000:0012c000
  get Phys(data[n=6+1000]=f74d7000)
AtapiVirtToPhysAddr_: f74d7000 -> 00000000:0012d000
  get Phys(data[n=6+2000]=f74d8000)
AtapiVirtToPhysAddr_: f74d8000 -> 00000000:0012e000
  get Phys(data[n=6+3000]=f74d9000)
AtapiVirtToPhysAddr_: f74d9000 -> 00000000:0012f000
  get Phys(data[n=6+4000]=f74da000)
AtapiVirtToPhysAddr_: f74da000 -> 00000000:00110000
  get Phys(data[n=7+1000]=f74db000)
AtapiVirtToPhysAddr_: f74db000 -> 00000000:00121000
  get Phys(data[n=8+1000]=f74dc000)
AtapiVirtToPhysAddr_: f74dc000 -> 00000000:00122000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 8 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238e170 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238e140
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238e140, status 1
AtapiInterrupt: RequestComplete, srb 0xb238e140
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238c638, CDB 0xb238c668, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238c638
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238c668)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f74dd000, count 10000, lCh 0, dev 0
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74dd000)
AtapiVirtToPhysAddr_: f74dd000 -> 00000000:0011b000
  get Phys(data[n=1+1000]=f74de000)
AtapiVirtToPhysAddr_: f74de000 -> 00000000:00124000
  get Phys(data[n=2+1000]=f74df000)
AtapiVirtToPhysAddr_: f74df000 -> 00000000:00125000
  get Phys(data[n=2+2000]=f74e0000)
AtapiVirtToPhysAddr_: f74e0000 -> 00000000:00126000
  get Phys(data[n=2+3000]=f74e1000)
AtapiVirtToPhysAddr_: f74e1000 -> 00000000:00127000
  get Phys(data[n=2+4000]=f74e2000)
AtapiVirtToPhysAddr_: f74e2000 -> 00000000:00108000
  get Phys(data[n=3+1000]=f74e3000)
AtapiVirtToPhysAddr_: f74e3000 -> 00000000:00119000
  get Phys(data[n=4+1000]=f74e4000)
AtapiVirtToPhysAddr_: f74e4000 -> 00000000:0011a000
  get Phys(data[n=4+2000]=f74e5000)
AtapiVirtToPhysAddr_: f74e5000 -> 00000000:00113000
  get Phys(data[n=5+1000]=f74e6000)
AtapiVirtToPhysAddr_: f74e6000 -> 00000000:0011c000
  get Phys(data[n=6+1000]=f74e7000)
AtapiVirtToPhysAddr_: f74e7000 -> 00000000:0011d000
  get Phys(data[n=6+2000]=f74e8000)
AtapiVirtToPhysAddr_: f74e8000 -> 00000000:0011e000
  get Phys(data[n=6+3000]=f74e9000)
AtapiVirtToPhysAddr_: f74e9000 -> 00000000:0011f000
  get Phys(data[n=6+4000]=f74ea000)
AtapiVirtToPhysAddr_: f74ea000 -> 00000000:007f8000
  get Phys(data[n=7+1000]=f74eb000)
AtapiVirtToPhysAddr_: f74eb000 -> 00000000:00111000
  get Phys(data[n=8+1000]=f74ec000)
AtapiVirtToPhysAddr_: f74ec000 -> 00000000:00112000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 8 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238c668 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238c638
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238c638, status 1
AtapiInterrupt: RequestComplete, srb 0xb238c638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238c998, CDB 0xb238c9c8, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238c998
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238c9c8)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f74ed000, count 10000, lCh 0, dev 0
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74ed000)
AtapiVirtToPhysAddr_: f74ed000 -> 00000000:0010b000
  get Phys(data[n=1+1000]=f74ee000)
AtapiVirtToPhysAddr_: f74ee000 -> 00000000:00114000
  get Phys(data[n=2+1000]=f74ef000)
AtapiVirtToPhysAddr_: f74ef000 -> 00000000:00115000
  get Phys(data[n=2+2000]=f74f0000)
AtapiVirtToPhysAddr_: f74f0000 -> 00000000:00116000
  get Phys(data[n=2+3000]=f74f1000)
AtapiVirtToPhysAddr_: f74f1000 -> 00000000:00117000
  get Phys(data[n=2+4000]=f74f2000)
AtapiVirtToPhysAddr_: f74f2000 -> 00000000:007f0000
  get Phys(data[n=3+1000]=f74f3000)
AtapiVirtToPhysAddr_: f74f3000 -> 00000000:00109000
  get Phys(data[n=4+1000]=f74f4000)
AtapiVirtToPhysAddr_: f74f4000 -> 00000000:0010a000
  get Phys(data[n=4+2000]=f74f5000)
AtapiVirtToPhysAddr_: f74f5000 -> 00000000:007fb000
  get Phys(data[n=5+1000]=f74f6000)
AtapiVirtToPhysAddr_: f74f6000 -> 00000000:0010c000
  get Phys(data[n=6+1000]=f74f7000)
AtapiVirtToPhysAddr_: f74f7000 -> 00000000:0010d000
  get Phys(data[n=6+2000]=f74f8000)
AtapiVirtToPhysAddr_: f74f8000 -> 00000000:0010e000
  get Phys(data[n=6+3000]=f74f9000)
AtapiVirtToPhysAddr_: f74f9000 -> 00000000:0010f000
  get Phys(data[n=6+4000]=f74fa000)
AtapiVirtToPhysAddr_: f74fa000 -> 00000000:007e8000
  get Phys(data[n=7+1000]=f74fb000)
AtapiVirtToPhysAddr_: f74fb000 -> 00000000:007f9000
  get Phys(data[n=8+1000]=f74fc000)
AtapiVirtToPhysAddr_: f74fc000 -> 00000000:007fa000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 8 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238c9c8 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238c998
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238c998, status 1
AtapiInterrupt: RequestComplete, srb 0xb238c998
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238ca18, CDB 0xb238ca48, AtaReq 0xb266d000, SCmd 0x0
UniataNeedQueueing: TopLevel, qd=0
Send to device 0
TopLevel (2), srb 0xb238ca18
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 0
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b238ca48)
  assume 0-transfer
AtapiSendCommand: zero/unaligned transfer 0, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 0
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiDmaReinit: set PIO mode on Device 0 (42 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
Intel 0
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238ca48 Command 0x0 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238ca18
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: wordCount 0x0, WordsTransfered 0x0
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0x0, srb->DataBuffer 0x0, len 0x0
   Transfered 0, full size 0
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238ca18, status 1
AtapiInterrupt: RequestComplete, srb 0xb238ca18
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238c998, CDB 0xb238c9c8, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238c998
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238c9c8)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0xc, data f74b8000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74b8000)
AtapiVirtToPhysAddr_: f74b8000 -> 00000000:007ed000
  get Phys(data[n=1+1000]=f74b9000)
AtapiVirtToPhysAddr_: f74b9000 -> 00000000:007fe000
  get Phys(data[n=2+1000]=f74ba000)
AtapiVirtToPhysAddr_: f74ba000 -> 00000000:007ff000
  get Phys(data[n=2+2000]=f74bb000)
AtapiVirtToPhysAddr_: f74bb000 -> 00000000:007d8000
  get Phys(data[n=3+1000]=f74bc000)
AtapiVirtToPhysAddr_: f74bc000 -> 00000000:007e9000
  get Phys(data[n=4+1000]=f74bd000)
AtapiVirtToPhysAddr_: f74bd000 -> 00000000:007ea000
  get Phys(data[n=4+2000]=f74be000)
AtapiVirtToPhysAddr_: f74be000 -> 00000000:007e3000
  get Phys(data[n=5+1000]=f74bf000)
AtapiVirtToPhysAddr_: f74bf000 -> 00000000:007e4000
  get Phys(data[n=5+2000]=f74c0000)
AtapiVirtToPhysAddr_: f74c0000 -> 00000000:007e5000
  get Phys(data[n=5+3000]=f74c1000)
AtapiVirtToPhysAddr_: f74c1000 -> 00000000:007f6000
  get Phys(data[n=6+1000]=f74c2000)
AtapiVirtToPhysAddr_: f74c2000 -> 00000000:007f7000
  get Phys(data[n=6+2000]=f74c3000)
AtapiVirtToPhysAddr_: f74c3000 -> 00000000:007d0000
  get Phys(data[n=7+1000]=f74c4000)
AtapiVirtToPhysAddr_: f74c4000 -> 00000000:007e1000
  get Phys(data[n=8+1000]=f74c5000)
AtapiVirtToPhysAddr_: f74c5000 -> 00000000:007e2000
  get Phys(data[n=8+2000]=f74c6000)
AtapiVirtToPhysAddr_: f74c6000 -> 00000000:007db000
  get Phys(data[n=9+1000]=f74c7000)
AtapiVirtToPhysAddr_: f74c7000 -> 00000000:007dc000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 9 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
Intel 0
AtaSetTransferMode: Set 0x42 on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x42 feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238c9c8 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x41, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238c998
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  DmaTransfer + !BM_STATUS_INTR (1)
  getting status...
  status 0xc0
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238c998, status 1
AtapiInterrupt: RequestComplete, srb 0xb238c998
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238c638, CDB 0xb238c668, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238c638
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238c668)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f74c8000, count 10000, lCh 0, dev 0
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74c8000)
AtapiVirtToPhysAddr_: f74c8000 -> 00000000:007dd000
  get Phys(data[n=1+1000]=f74c9000)
AtapiVirtToPhysAddr_: f74c9000 -> 00000000:007ee000
  get Phys(data[n=2+1000]=f74ca000)
AtapiVirtToPhysAddr_: f74ca000 -> 00000000:007ef000
  get Phys(data[n=2+2000]=f74cb000)
AtapiVirtToPhysAddr_: f74cb000 -> 00000000:00fe8000
  get Phys(data[n=3+1000]=f74cc000)
AtapiVirtToPhysAddr_: f74cc000 -> 00000000:007d9000
  get Phys(data[n=4+1000]=f74cd000)
AtapiVirtToPhysAddr_: f74cd000 -> 00000000:007da000
  get Phys(data[n=4+2000]=f74ce000)
AtapiVirtToPhysAddr_: f74ce000 -> 00000000:007d3000
  get Phys(data[n=5+1000]=f74cf000)
AtapiVirtToPhysAddr_: f74cf000 -> 00000000:007d4000
  get Phys(data[n=5+2000]=f74d0000)
AtapiVirtToPhysAddr_: f74d0000 -> 00000000:007d5000
  get Phys(data[n=5+3000]=f74d1000)
AtapiVirtToPhysAddr_: f74d1000 -> 00000000:007e6000
  get Phys(data[n=6+1000]=f74d2000)
AtapiVirtToPhysAddr_: f74d2000 -> 00000000:007e7000
  get Phys(data[n=6+2000]=f74d3000)
AtapiVirtToPhysAddr_: f74d3000 -> 00000000:00fe0000
  get Phys(data[n=7+1000]=f74d4000)
AtapiVirtToPhysAddr_: f74d4000 -> 00000000:007d1000
  get Phys(data[n=8+1000]=f74d5000)
AtapiVirtToPhysAddr_: f74d5000 -> 00000000:007d2000
  get Phys(data[n=8+2000]=f74d6000)
AtapiVirtToPhysAddr_: f74d6000 -> 00000000:00feb000
  get Phys(data[n=9+1000]=f74d7000)
AtapiVirtToPhysAddr_: f74d7000 -> 00000000:00fec000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 9 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238c668 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238c638
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238c638, status 1
AtapiInterrupt: RequestComplete, srb 0xb238c638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238e140, CDB 0xb238e170, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238e140
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238e170)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f74d8000, count 10000, lCh 0, dev 0
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74d8000)
AtapiVirtToPhysAddr_: f74d8000 -> 00000000:007cd000
  get Phys(data[n=1+1000]=f74d9000)
AtapiVirtToPhysAddr_: f74d9000 -> 00000000:007de000
  get Phys(data[n=2+1000]=f74da000)
AtapiVirtToPhysAddr_: f74da000 -> 00000000:007df000
  get Phys(data[n=2+2000]=f74db000)
AtapiVirtToPhysAddr_: f74db000 -> 00000000:00fd8000
  get Phys(data[n=3+1000]=f74dc000)
AtapiVirtToPhysAddr_: f74dc000 -> 00000000:00fe9000
  get Phys(data[n=4+1000]=f74dd000)
AtapiVirtToPhysAddr_: f74dd000 -> 00000000:00fea000
  get Phys(data[n=4+2000]=f74de000)
AtapiVirtToPhysAddr_: f74de000 -> 00000000:00fe3000
  get Phys(data[n=5+1000]=f74df000)
AtapiVirtToPhysAddr_: f74df000 -> 00000000:00fe4000
  get Phys(data[n=5+2000]=f74e0000)
AtapiVirtToPhysAddr_: f74e0000 -> 00000000:00fed000
  get Phys(data[n=6+1000]=f74e1000)
AtapiVirtToPhysAddr_: f74e1000 -> 00000000:007d6000
  get Phys(data[n=7+1000]=f74e2000)
AtapiVirtToPhysAddr_: f74e2000 -> 00000000:007d7000
  get Phys(data[n=7+2000]=f74e3000)
AtapiVirtToPhysAddr_: f74e3000 -> 00000000:00fd0000
  get Phys(data[n=8+1000]=f74e4000)
AtapiVirtToPhysAddr_: f74e4000 -> 00000000:00fe1000
  get Phys(data[n=9+1000]=f74e5000)
AtapiVirtToPhysAddr_: f74e5000 -> 00000000:00fe2000
  get Phys(data[n=9+2000]=f74e6000)
AtapiVirtToPhysAddr_: f74e6000 -> 00000000:00fdb000
  get Phys(data[n=10+1000]=f74e7000)
AtapiVirtToPhysAddr_: f74e7000 -> 00000000:00fdc000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 10 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238e170 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238e140
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238e140, status 1
AtapiInterrupt: RequestComplete, srb 0xb238e140
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238f280, CDB 0xb238f2b0, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238f280
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238f2b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f74e8000, count 10000, lCh 0, dev 0
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74e8000)
AtapiVirtToPhysAddr_: f74e8000 -> 00000000:00fe5000
  get Phys(data[n=1+1000]=f74e9000)
AtapiVirtToPhysAddr_: f74e9000 -> 00000000:007ce000
  get Phys(data[n=2+1000]=f74ea000)
AtapiVirtToPhysAddr_: f74ea000 -> 00000000:007cf000
  get Phys(data[n=2+2000]=f74eb000)
AtapiVirtToPhysAddr_: f74eb000 -> 00000000:00fc8000
  get Phys(data[n=3+1000]=f74ec000)
AtapiVirtToPhysAddr_: f74ec000 -> 00000000:00fd9000
  get Phys(data[n=4+1000]=f74ed000)
AtapiVirtToPhysAddr_: f74ed000 -> 00000000:00fda000
  get Phys(data[n=4+2000]=f74ee000)
AtapiVirtToPhysAddr_: f74ee000 -> 00000000:00fd3000
  get Phys(data[n=5+1000]=f74ef000)
AtapiVirtToPhysAddr_: f74ef000 -> 00000000:00fd4000
  get Phys(data[n=5+2000]=f74f0000)
AtapiVirtToPhysAddr_: f74f0000 -> 00000000:00fdd000
  get Phys(data[n=6+1000]=f74f1000)
AtapiVirtToPhysAddr_: f74f1000 -> 00000000:00fe6000
  get Phys(data[n=7+1000]=f74f2000)
AtapiVirtToPhysAddr_: f74f2000 -> 00000000:00fe7000
  get Phys(data[n=7+2000]=f74f3000)
AtapiVirtToPhysAddr_: f74f3000 -> 00000000:00fc0000
  get Phys(data[n=8+1000]=f74f4000)
AtapiVirtToPhysAddr_: f74f4000 -> 00000000:00fd1000
  get Phys(data[n=9+1000]=f74f5000)
AtapiVirtToPhysAddr_: f74f5000 -> 00000000:00fd2000
  get Phys(data[n=9+2000]=f74f6000)
AtapiVirtToPhysAddr_: f74f6000 -> 00000000:00fcb000
  get Phys(data[n=10+1000]=f74f7000)
AtapiVirtToPhysAddr_: f74f7000 -> 00000000:00fcc000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 10 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238f2b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238f280
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238f280, status 1
AtapiInterrupt: RequestComplete, srb 0xb238f280
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238f280, CDB 0xb238f2b0, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238f280
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238f2b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f74f5000, count 2000, lCh 0, dev 0
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74f5000)
AtapiVirtToPhysAddr_: f74f5000 -> 00000000:00fd5000
  get Phys(data[n=1+1000]=f74f6000)
AtapiVirtToPhysAddr_: f74f6000 -> 00000000:00fde000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 2 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238f2b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x20:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238f280
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238f280, status 1
AtapiInterrupt: RequestComplete, srb 0xb238f280
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238f280, CDB 0xb238f2b0, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238f280
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238f2b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f74b4000, count 10000, lCh 0, dev 0
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74b4000)
AtapiVirtToPhysAddr_: f74b4000 -> 00000000:00f9a000
  get Phys(data[n=1+1000]=f74b5000)
AtapiVirtToPhysAddr_: f74b5000 -> 00000000:00f8b000
  get Phys(data[n=2+1000]=f74b6000)
AtapiVirtToPhysAddr_: f74b6000 -> 00000000:00f8c000
  get Phys(data[n=2+2000]=f74b7000)
AtapiVirtToPhysAddr_: f74b7000 -> 00000000:00f95000
  get Phys(data[n=3+1000]=f74b8000)
AtapiVirtToPhysAddr_: f74b8000 -> 00000000:00f9e000
  get Phys(data[n=4+1000]=f74b9000)
AtapiVirtToPhysAddr_: f74b9000 -> 00000000:00f9f000
  get Phys(data[n=4+2000]=f74ba000)
AtapiVirtToPhysAddr_: f74ba000 -> 00000000:00f80000
  get Phys(data[n=5+1000]=f74bb000)
AtapiVirtToPhysAddr_: f74bb000 -> 00000000:00f91000
  get Phys(data[n=6+1000]=f74bc000)
AtapiVirtToPhysAddr_: f74bc000 -> 00000000:00f92000
  get Phys(data[n=6+2000]=f74bd000)
AtapiVirtToPhysAddr_: f74bd000 -> 00000000:00f83000
  get Phys(data[n=7+1000]=f74be000)
AtapiVirtToPhysAddr_: f74be000 -> 00000000:00f84000
  get Phys(data[n=7+2000]=f74bf000)
AtapiVirtToPhysAddr_: f74bf000 -> 00000000:00f8d000
  get Phys(data[n=8+1000]=f74c0000)
AtapiVirtToPhysAddr_: f74c0000 -> 00000000:00f96000
  get Phys(data[n=9+1000]=f74c1000)
AtapiVirtToPhysAddr_: f74c1000 -> 00000000:00f97000
  get Phys(data[n=9+2000]=f74c2000)
AtapiVirtToPhysAddr_: f74c2000 -> 00000000:00f78000
  get Phys(data[n=10+1000]=f74c3000)
AtapiVirtToPhysAddr_: f74c3000 -> 00000000:00f89000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 11 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238f2b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238f280
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238f280, status 1
AtapiInterrupt: RequestComplete, srb 0xb238f280
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238e140, CDB 0xb238e170, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238e140
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238e170)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f74c4000, count 10000, lCh 0, dev 0
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74c4000)
AtapiVirtToPhysAddr_: f74c4000 -> 00000000:00f8a000
  get Phys(data[n=1+1000]=f74c5000)
AtapiVirtToPhysAddr_: f74c5000 -> 00000000:00f7b000
  get Phys(data[n=2+1000]=f74c6000)
AtapiVirtToPhysAddr_: f74c6000 -> 00000000:00f7c000
  get Phys(data[n=2+2000]=f74c7000)
AtapiVirtToPhysAddr_: f74c7000 -> 00000000:00f85000
  get Phys(data[n=3+1000]=f74c8000)
AtapiVirtToPhysAddr_: f74c8000 -> 00000000:00f8e000
  get Phys(data[n=4+1000]=f74c9000)
AtapiVirtToPhysAddr_: f74c9000 -> 00000000:00f8f000
  get Phys(data[n=4+2000]=f74ca000)
AtapiVirtToPhysAddr_: f74ca000 -> 00000000:00f70000
  get Phys(data[n=5+1000]=f74cb000)
AtapiVirtToPhysAddr_: f74cb000 -> 00000000:00f81000
  get Phys(data[n=6+1000]=f74cc000)
AtapiVirtToPhysAddr_: f74cc000 -> 00000000:00f82000
  get Phys(data[n=6+2000]=f74cd000)
AtapiVirtToPhysAddr_: f74cd000 -> 00000000:00f73000
  get Phys(data[n=7+1000]=f74ce000)
AtapiVirtToPhysAddr_: f74ce000 -> 00000000:00f74000
  get Phys(data[n=7+2000]=f74cf000)
AtapiVirtToPhysAddr_: f74cf000 -> 00000000:00f7d000
  get Phys(data[n=8+1000]=f74d0000)
AtapiVirtToPhysAddr_: f74d0000 -> 00000000:00f86000
  get Phys(data[n=9+1000]=f74d1000)
AtapiVirtToPhysAddr_: f74d1000 -> 00000000:00f87000
  get Phys(data[n=9+2000]=f74d2000)
AtapiVirtToPhysAddr_: f74d2000 -> 00000000:00f68000
  get Phys(data[n=10+1000]=f74d3000)
AtapiVirtToPhysAddr_: f74d3000 -> 00000000:00f79000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 11 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238e170 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238e140
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238e140, status 1
AtapiInterrupt: RequestComplete, srb 0xb238e140
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238c638, CDB 0xb238c668, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238c638
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238c668)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f74d4000, count 10000, lCh 0, dev 0
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74d4000)
AtapiVirtToPhysAddr_: f74d4000 -> 00000000:00f7a000
  get Phys(data[n=1+1000]=f74d5000)
AtapiVirtToPhysAddr_: f74d5000 -> 00000000:00f6b000
  get Phys(data[n=2+1000]=f74d6000)
AtapiVirtToPhysAddr_: f74d6000 -> 00000000:00f6c000
  get Phys(data[n=2+2000]=f74d7000)
AtapiVirtToPhysAddr_: f74d7000 -> 00000000:00f75000
  get Phys(data[n=3+1000]=f74d8000)
AtapiVirtToPhysAddr_: f74d8000 -> 00000000:00f7e000
  get Phys(data[n=4+1000]=f74d9000)
AtapiVirtToPhysAddr_: f74d9000 -> 00000000:00f7f000
  get Phys(data[n=4+2000]=f74da000)
AtapiVirtToPhysAddr_: f74da000 -> 00000000:00f60000
  get Phys(data[n=5+1000]=f74db000)
AtapiVirtToPhysAddr_: f74db000 -> 00000000:00f71000
  get Phys(data[n=6+1000]=f74dc000)
AtapiVirtToPhysAddr_: f74dc000 -> 00000000:00f72000
  get Phys(data[n=6+2000]=f74dd000)
AtapiVirtToPhysAddr_: f74dd000 -> 00000000:00f63000
  get Phys(data[n=7+1000]=f74de000)
AtapiVirtToPhysAddr_: f74de000 -> 00000000:00f64000
  get Phys(data[n=7+2000]=f74df000)
AtapiVirtToPhysAddr_: f74df000 -> 00000000:00f6d000
  get Phys(data[n=8+1000]=f74e0000)
AtapiVirtToPhysAddr_: f74e0000 -> 00000000:00f76000
  get Phys(data[n=9+1000]=f74e1000)
AtapiVirtToPhysAddr_: f74e1000 -> 00000000:00f77000
  get Phys(data[n=9+2000]=f74e2000)
AtapiVirtToPhysAddr_: f74e2000 -> 00000000:00f58000
  get Phys(data[n=10+1000]=f74e3000)
AtapiVirtToPhysAddr_: f74e3000 -> 00000000:00f69000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 11 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238c668 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238c638
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238c638, status 1
AtapiInterrupt: RequestComplete, srb 0xb238c638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238c998, CDB 0xb238c9c8, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238c998
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238c9c8)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f74e4000, count 10000, lCh 0, dev 0
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74e4000)
AtapiVirtToPhysAddr_: f74e4000 -> 00000000:00f6a000
  get Phys(data[n=1+1000]=f74e5000)
AtapiVirtToPhysAddr_: f74e5000 -> 00000000:00f5b000
  get Phys(data[n=2+1000]=f74e6000)
AtapiVirtToPhysAddr_: f74e6000 -> 00000000:00f5c000
  get Phys(data[n=2+2000]=f74e7000)
AtapiVirtToPhysAddr_: f74e7000 -> 00000000:00f65000
  get Phys(data[n=3+1000]=f74e8000)
AtapiVirtToPhysAddr_: f74e8000 -> 00000000:00f6e000
  get Phys(data[n=4+1000]=f74e9000)
AtapiVirtToPhysAddr_: f74e9000 -> 00000000:00f6f000
  get Phys(data[n=4+2000]=f74ea000)
AtapiVirtToPhysAddr_: f74ea000 -> 00000000:00f50000
  get Phys(data[n=5+1000]=f74eb000)
AtapiVirtToPhysAddr_: f74eb000 -> 00000000:00f61000
  get Phys(data[n=6+1000]=f74ec000)
AtapiVirtToPhysAddr_: f74ec000 -> 00000000:00f62000
  get Phys(data[n=6+2000]=f74ed000)
AtapiVirtToPhysAddr_: f74ed000 -> 00000000:00f53000
  get Phys(data[n=7+1000]=f74ee000)
AtapiVirtToPhysAddr_: f74ee000 -> 00000000:00f54000
  get Phys(data[n=7+2000]=f74ef000)
AtapiVirtToPhysAddr_: f74ef000 -> 00000000:00f5d000
  get Phys(data[n=8+1000]=f74f0000)
AtapiVirtToPhysAddr_: f74f0000 -> 00000000:00f66000
  get Phys(data[n=9+1000]=f74f1000)
AtapiVirtToPhysAddr_: f74f1000 -> 00000000:00f67000
  get Phys(data[n=9+2000]=f74f2000)
AtapiVirtToPhysAddr_: f74f2000 -> 00000000:00f48000
  get Phys(data[n=10+1000]=f74f3000)
AtapiVirtToPhysAddr_: f74f3000 -> 00000000:00f59000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 11 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238c9c8 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238c998
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238c998, status 1
AtapiInterrupt: RequestComplete, srb 0xb238c998
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238ca18, CDB 0xb238ca48, AtaReq 0xb266d000, SCmd 0x0
UniataNeedQueueing: TopLevel, qd=0
Send to device 0
TopLevel (2), srb 0xb238ca18
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 0
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b238ca48)
  assume 0-transfer
AtapiSendCommand: zero/unaligned transfer 0, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 0
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiDmaReinit: set PIO mode on Device 0 (42 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
Intel 0
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238ca48 Command 0x0 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238ca18
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: wordCount 0x0, WordsTransfered 0x0
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0x0, srb->DataBuffer 0x0, len 0x0
   Transfered 0, full size 0
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238ca18, status 1
AtapiInterrupt: RequestComplete, srb 0xb238ca18
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238ca18, CDB 0xb238ca48, AtaReq 0xb266d000, SCmd 0x0
UniataNeedQueueing: TopLevel, qd=0
Send to device 0
TopLevel (2), srb 0xb238ca18
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 0
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b238ca48)
  assume 0-transfer
AtapiSendCommand: zero/unaligned transfer 0, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 0
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238ca48 Command 0x0 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238ca18
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: wordCount 0x0, WordsTransfered 0x0
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0x0, srb->DataBuffer 0x0, len 0x0
   Transfered 0, full size 0
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238ca18, status 1
AtapiInterrupt: RequestComplete, srb 0xb238ca18
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238c998, CDB 0xb238c9c8, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238c998
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238c9c8)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0xc, data f74b0000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74b0000)
AtapiVirtToPhysAddr_: f74b0000 -> 00000000:00f3d000
  get Phys(data[n=1+1000]=f74b1000)
AtapiVirtToPhysAddr_: f74b1000 -> 00000000:00f46000
  get Phys(data[n=2+1000]=f74b2000)
AtapiVirtToPhysAddr_: f74b2000 -> 00000000:00f47000
  get Phys(data[n=2+2000]=f74b3000)
AtapiVirtToPhysAddr_: f74b3000 -> 00000000:00f20000
  get Phys(data[n=3+1000]=f74b4000)
AtapiVirtToPhysAddr_: f74b4000 -> 00000000:00f31000
  get Phys(data[n=4+1000]=f74b5000)
AtapiVirtToPhysAddr_: f74b5000 -> 00000000:00f3a000
  get Phys(data[n=5+1000]=f74b6000)
AtapiVirtToPhysAddr_: f74b6000 -> 00000000:00f2b000
  get Phys(data[n=6+1000]=f74b7000)
AtapiVirtToPhysAddr_: f74b7000 -> 00000000:00f2c000
  get Phys(data[n=6+2000]=f74b8000)
AtapiVirtToPhysAddr_: f74b8000 -> 00000000:00f35000
  get Phys(data[n=7+1000]=f74b9000)
AtapiVirtToPhysAddr_: f74b9000 -> 00000000:00f3e000
  get Phys(data[n=8+1000]=f74ba000)
AtapiVirtToPhysAddr_: f74ba000 -> 00000000:00f3f000
  get Phys(data[n=8+2000]=f74bb000)
AtapiVirtToPhysAddr_: f74bb000 -> 00000000:00f18000
  get Phys(data[n=9+1000]=f74bc000)
AtapiVirtToPhysAddr_: f74bc000 -> 00000000:00f29000
  get Phys(data[n=10+1000]=f74bd000)
AtapiVirtToPhysAddr_: f74bd000 -> 00000000:00f32000
  get Phys(data[n=11+1000]=f74be000)
AtapiVirtToPhysAddr_: f74be000 -> 00000000:00f23000
  get Phys(data[n=12+1000]=f74bf000)
AtapiVirtToPhysAddr_: f74bf000 -> 00000000:00f24000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 12 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
Intel 0
AtaSetTransferMode: Set 0x42 on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x42 feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238c9c8 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x41, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238c998
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  DmaTransfer + !BM_STATUS_INTR (1)
  getting status...
  status 0xd0
  special case DMA + ATAPI + IDE_STATUS_DSC -> our
  ATAPI status 0xd0
  ATAPI additional check
  status re-check 0xd0
  Error reg (0xd0)
  still BUSY, seems it is not our
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238c998, status 1
AtapiInterrupt: RequestComplete, srb 0xb238c998
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238c638, CDB 0xb238c668, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238c638
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238c668)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f74c0000, count 10000, lCh 0, dev 0
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74c0000)
AtapiVirtToPhysAddr_: f74c0000 -> 00000000:00f2d000
  get Phys(data[n=1+1000]=f74c1000)
AtapiVirtToPhysAddr_: f74c1000 -> 00000000:00f36000
  get Phys(data[n=2+1000]=f74c2000)
AtapiVirtToPhysAddr_: f74c2000 -> 00000000:00f37000
  get Phys(data[n=2+2000]=f74c3000)
AtapiVirtToPhysAddr_: f74c3000 -> 00000000:00f10000
  get Phys(data[n=3+1000]=f74c4000)
AtapiVirtToPhysAddr_: f74c4000 -> 00000000:00f21000
  get Phys(data[n=4+1000]=f74c5000)
AtapiVirtToPhysAddr_: f74c5000 -> 00000000:00f2a000
  get Phys(data[n=5+1000]=f74c6000)
AtapiVirtToPhysAddr_: f74c6000 -> 00000000:00f1b000
  get Phys(data[n=6+1000]=f74c7000)
AtapiVirtToPhysAddr_: f74c7000 -> 00000000:00f1c000
  get Phys(data[n=6+2000]=f74c8000)
AtapiVirtToPhysAddr_: f74c8000 -> 00000000:00f25000
  get Phys(data[n=7+1000]=f74c9000)
AtapiVirtToPhysAddr_: f74c9000 -> 00000000:00f2e000
  get Phys(data[n=8+1000]=f74ca000)
AtapiVirtToPhysAddr_: f74ca000 -> 00000000:00f2f000
  get Phys(data[n=8+2000]=f74cb000)
AtapiVirtToPhysAddr_: f74cb000 -> 00000000:00f08000
  get Phys(data[n=9+1000]=f74cc000)
AtapiVirtToPhysAddr_: f74cc000 -> 00000000:00f19000
  get Phys(data[n=10+1000]=f74cd000)
AtapiVirtToPhysAddr_: f74cd000 -> 00000000:00f22000
  get Phys(data[n=11+1000]=f74ce000)
AtapiVirtToPhysAddr_: f74ce000 -> 00000000:00f13000
  get Phys(data[n=12+1000]=f74cf000)
AtapiVirtToPhysAddr_: f74cf000 -> 00000000:00f14000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 12 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238c668 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238c638
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238c638, status 1
AtapiInterrupt: RequestComplete, srb 0xb238c638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238e140, CDB 0xb238e170, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238e140
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238e170)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f74d0000, count 10000, lCh 0, dev 0
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74d0000)
AtapiVirtToPhysAddr_: f74d0000 -> 00000000:00f1d000
  get Phys(data[n=1+1000]=f74d1000)
AtapiVirtToPhysAddr_: f74d1000 -> 00000000:00f26000
  get Phys(data[n=2+1000]=f74d2000)
AtapiVirtToPhysAddr_: f74d2000 -> 00000000:00f27000
  get Phys(data[n=2+2000]=f74d3000)
AtapiVirtToPhysAddr_: f74d3000 -> 00000000:00f00000
  get Phys(data[n=3+1000]=f74d4000)
AtapiVirtToPhysAddr_: f74d4000 -> 00000000:00f11000
  get Phys(data[n=4+1000]=f74d5000)
AtapiVirtToPhysAddr_: f74d5000 -> 00000000:00f1a000
  get Phys(data[n=5+1000]=f74d6000)
AtapiVirtToPhysAddr_: f74d6000 -> 00000000:00f0b000
  get Phys(data[n=6+1000]=f74d7000)
AtapiVirtToPhysAddr_: f74d7000 -> 00000000:00f0c000
  get Phys(data[n=6+2000]=f74d8000)
AtapiVirtToPhysAddr_: f74d8000 -> 00000000:00f15000
  get Phys(data[n=7+1000]=f74d9000)
AtapiVirtToPhysAddr_: f74d9000 -> 00000000:00f1e000
  get Phys(data[n=8+1000]=f74da000)
AtapiVirtToPhysAddr_: f74da000 -> 00000000:00f1f000
  get Phys(data[n=8+2000]=f74db000)
AtapiVirtToPhysAddr_: f74db000 -> 00000000:00ef8000
  get Phys(data[n=9+1000]=f74dc000)
AtapiVirtToPhysAddr_: f74dc000 -> 00000000:00f09000
  get Phys(data[n=10+1000]=f74dd000)
AtapiVirtToPhysAddr_: f74dd000 -> 00000000:00f12000
  get Phys(data[n=11+1000]=f74de000)
AtapiVirtToPhysAddr_: f74de000 -> 00000000:00f03000
  get Phys(data[n=12+1000]=f74df000)
AtapiVirtToPhysAddr_: f74df000 -> 00000000:00f04000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 12 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238e170 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238e140
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238e140, status 1
AtapiInterrupt: RequestComplete, srb 0xb238e140
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238f280, CDB 0xb238f2b0, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238f280
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238f2b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f74e0000, count 10000, lCh 0, dev 0
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74e0000)
AtapiVirtToPhysAddr_: f74e0000 -> 00000000:00f0d000
  get Phys(data[n=1+1000]=f74e1000)
AtapiVirtToPhysAddr_: f74e1000 -> 00000000:00f16000
  get Phys(data[n=2+1000]=f74e2000)
AtapiVirtToPhysAddr_: f74e2000 -> 00000000:00f17000
  get Phys(data[n=2+2000]=f74e3000)
AtapiVirtToPhysAddr_: f74e3000 -> 00000000:00ef0000
  get Phys(data[n=3+1000]=f74e4000)
AtapiVirtToPhysAddr_: f74e4000 -> 00000000:00f01000
  get Phys(data[n=4+1000]=f74e5000)
AtapiVirtToPhysAddr_: f74e5000 -> 00000000:00f0a000
  get Phys(data[n=5+1000]=f74e6000)
AtapiVirtToPhysAddr_: f74e6000 -> 00000000:00efb000
  get Phys(data[n=6+1000]=f74e7000)
AtapiVirtToPhysAddr_: f74e7000 -> 00000000:00efc000
  get Phys(data[n=6+2000]=f74e8000)
AtapiVirtToPhysAddr_: f74e8000 -> 00000000:00f05000
  get Phys(data[n=7+1000]=f74e9000)
AtapiVirtToPhysAddr_: f74e9000 -> 00000000:00f0e000
  get Phys(data[n=8+1000]=f74ea000)
AtapiVirtToPhysAddr_: f74ea000 -> 00000000:00f0f000
  get Phys(data[n=8+2000]=f74eb000)
AtapiVirtToPhysAddr_: f74eb000 -> 00000000:00ff8000
  get Phys(data[n=9+1000]=f74ec000)
AtapiVirtToPhysAddr_: f74ec000 -> 00000000:00ef9000
  get Phys(data[n=10+1000]=f74ed000)
AtapiVirtToPhysAddr_: f74ed000 -> 00000000:00f02000
  get Phys(data[n=11+1000]=f74ee000)
AtapiVirtToPhysAddr_: f74ee000 -> 00000000:00ef3000
  get Phys(data[n=12+1000]=f74ef000)
AtapiVirtToPhysAddr_: f74ef000 -> 00000000:00ef4000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 12 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238f2b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238f280
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238f280, status 1
AtapiInterrupt: RequestComplete, srb 0xb238f280
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238ca18, CDB 0xb238ca48, AtaReq 0xb266d000, SCmd 0x0
UniataNeedQueueing: TopLevel, qd=0
Send to device 0
TopLevel (2), srb 0xb238ca18
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 0
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b238ca48)
  assume 0-transfer
AtapiSendCommand: zero/unaligned transfer 0, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 0
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiDmaReinit: set PIO mode on Device 0 (42 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
Intel 0
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238ca48 Command 0x0 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238ca18
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: wordCount 0x0, WordsTransfered 0x0
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0x0, srb->DataBuffer 0x0, len 0x0
   Transfered 0, full size 0
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238ca18, status 1
AtapiInterrupt: RequestComplete, srb 0xb238ca18
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238f280, CDB 0xb238f2b0, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238f280
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238f2b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0xc, data f74e5000, count 4000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74e5000)
AtapiVirtToPhysAddr_: f74e5000 -> 00000000:04c7d000
  get Phys(data[n=1+1000]=f74e6000)
AtapiVirtToPhysAddr_: f74e6000 -> 00000000:04c7e000
  get Phys(data[n=1+2000]=f74e7000)
AtapiVirtToPhysAddr_: f74e7000 -> 00000000:04c7f000
  get Phys(data[n=1+3000]=f74e8000)
AtapiVirtToPhysAddr_: f74e8000 -> 00000000:04c80000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 2 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
Intel 0
AtaSetTransferMode: Set 0x42 on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x42 feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238f2b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x40:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x41, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238f280
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  DmaTransfer + !BM_STATUS_INTR (1)
  getting status...
  status 0xc0
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 4000, full size 4000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238f280, status 1
AtapiInterrupt: RequestComplete, srb 0xb238f280
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238ca18, CDB 0xb238ca48, AtaReq 0xb266d000, SCmd 0x0
UniataNeedQueueing: TopLevel, qd=0
Send to device 0
TopLevel (2), srb 0xb238ca18
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 0
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b238ca48)
  assume 0-transfer
AtapiSendCommand: zero/unaligned transfer 0, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 0
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiDmaReinit: set PIO mode on Device 0 (42 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
Intel 0
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238ca48 Command 0x0 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238ca18
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: wordCount 0x0, WordsTransfered 0x0
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0x0, srb->DataBuffer 0x0, len 0x0
   Transfered 0, full size 0
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238ca18, status 1
AtapiInterrupt: RequestComplete, srb 0xb238ca18
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
(../base/setup/usetup/interface/devinst.c:95) Using driver 'pci.sys' for device 'PCI_HAL\PNP0A03\0'
(../ntoskrnl/io/pnpmgr/plugplay.c:766) A new driver will be loaded for 'PCI_HAL\PNP0A03\0' (no FDO above)
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238ca18, CDB 0xb238ca48, AtaReq 0xb266d000, SCmd 0x0
UniataNeedQueueing: TopLevel, qd=0
Send to device 0
TopLevel (2), srb 0xb238ca18
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 0
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b238ca48)
  assume 0-transfer
AtapiSendCommand: zero/unaligned transfer 0, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 0
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238ca48 Command 0x0 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238ca18
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: wordCount 0x0, WordsTransfered 0x0
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0x0, srb->DataBuffer 0x0, len 0x0
   Transfered 0, full size 0
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238ca18, status 1
AtapiInterrupt: RequestComplete, srb 0xb238ca18
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238ca18, CDB 0xb238ca48, AtaReq 0xb266d000, SCmd 0x0
UniataNeedQueueing: TopLevel, qd=0
Send to device 0
TopLevel (2), srb 0xb238ca18
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 0
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b238ca48)
  assume 0-transfer
AtapiSendCommand: zero/unaligned transfer 0, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 0
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238ca48 Command 0x0 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238ca18
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: wordCount 0x0, WordsTransfered 0x0
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0x0, srb->DataBuffer 0x0, len 0x0
   Transfered 0, full size 0
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238ca18, status 1
AtapiInterrupt: RequestComplete, srb 0xb238ca18
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238f280, CDB 0xb238f2b0, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238f280
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238f2b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0xc, data f74db000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74db000)
AtapiVirtToPhysAddr_: f74db000 -> 00000000:02fa9000
  get Phys(data[n=1+1000]=f74dc000)
AtapiVirtToPhysAddr_: f74dc000 -> 00000000:02faa000
  get Phys(data[n=1+2000]=f74dd000)
AtapiVirtToPhysAddr_: f74dd000 -> 00000000:02f9b000
  get Phys(data[n=2+1000]=f74de000)
AtapiVirtToPhysAddr_: f74de000 -> 00000000:02f9c000
  get Phys(data[n=2+2000]=f74df000)
AtapiVirtToPhysAddr_: f74df000 -> 00000000:02fad000
  get Phys(data[n=3+1000]=f74e0000)
AtapiVirtToPhysAddr_: f74e0000 -> 00000000:02fbe000
  get Phys(data[n=4+1000]=f74e1000)
AtapiVirtToPhysAddr_: f74e1000 -> 00000000:02fbf000
  get Phys(data[n=4+2000]=f74e2000)
AtapiVirtToPhysAddr_: f74e2000 -> 00000000:02f90000
  get Phys(data[n=5+1000]=f74e3000)
AtapiVirtToPhysAddr_: f74e3000 -> 00000000:02fa1000
  get Phys(data[n=6+1000]=f74e4000)
AtapiVirtToPhysAddr_: f74e4000 -> 00000000:02fa2000
  get Phys(data[n=6+2000]=f74e5000)
AtapiVirtToPhysAddr_: f74e5000 -> 00000000:02f93000
  get Phys(data[n=7+1000]=f74e6000)
AtapiVirtToPhysAddr_: f74e6000 -> 00000000:02f94000
  get Phys(data[n=7+2000]=f74e7000)
AtapiVirtToPhysAddr_: f74e7000 -> 00000000:02fa5000
  get Phys(data[n=8+1000]=f74e8000)
AtapiVirtToPhysAddr_: f74e8000 -> 00000000:02fb6000
  get Phys(data[n=9+1000]=f74e9000)
AtapiVirtToPhysAddr_: f74e9000 -> 00000000:02fb7000
  get Phys(data[n=9+2000]=f74ea000)
AtapiVirtToPhysAddr_: f74ea000 -> 00000000:02f88000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 10 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
Intel 0
AtaSetTransferMode: Set 0x42 on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x42 feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238f2b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x41, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238f280
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  DmaTransfer + !BM_STATUS_INTR (1)
  getting status...
  status 0xc0
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238f280, status 1
AtapiInterrupt: RequestComplete, srb 0xb238f280
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238e140, CDB 0xb238e170, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238e140
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238e170)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f74eb000, count 2000, lCh 0, dev 0
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74eb000)
AtapiVirtToPhysAddr_: f74eb000 -> 00000000:02f99000
  get Phys(data[n=1+1000]=f74ec000)
AtapiVirtToPhysAddr_: f74ec000 -> 00000000:02f9a000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 1 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238e170 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x20:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238e140
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238e140, status 1
AtapiInterrupt: RequestComplete, srb 0xb238e140
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238e140, CDB 0xb238e170, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238e140
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238e170)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f74ec800, count 800, lCh 0, dev 0
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74ec800)
AtapiVirtToPhysAddr_: f74ec800 -> 00000000:04c80800
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 1 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238e170 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x8:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238e140
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 800, full size 800
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238e140, status 1
AtapiInterrupt: RequestComplete, srb 0xb238e140
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238e140, CDB 0xb238e170, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238e140
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238e170)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f74e8000, count 2000, lCh 0, dev 0
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74e8000)
AtapiVirtToPhysAddr_: f74e8000 -> 00000000:02649000
  get Phys(data[n=1+1000]=f74e9000)
AtapiVirtToPhysAddr_: f74e9000 -> 00000000:0264a000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 1 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238e170 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x20:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238e140
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238e140, status 1
AtapiInterrupt: RequestComplete, srb 0xb238e140
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238ca18, CDB 0xb238ca48, AtaReq 0xb266d000, SCmd 0x0
UniataNeedQueueing: TopLevel, qd=0
Send to device 0
TopLevel (2), srb 0xb238ca18
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 0
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b238ca48)
  assume 0-transfer
AtapiSendCommand: zero/unaligned transfer 0, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 0
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiDmaReinit: set PIO mode on Device 0 (42 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
Intel 0
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238ca48 Command 0x0 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238ca18
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: wordCount 0x0, WordsTransfered 0x0
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0x0, srb->DataBuffer 0x0, len 0x0
   Transfered 0, full size 0
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238ca18, status 1
AtapiInterrupt: RequestComplete, srb 0xb238ca18
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
(../ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\System32\drivers\pci.sys at F74C6000 with 12 pages
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238e140, CDB 0xb238e170, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238e140
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238e170)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0xc, data f74c0000, count 6000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74c0000)
AtapiVirtToPhysAddr_: f74c0000 -> 00000000:04c77000
  get Phys(data[n=1+1000]=f74c1000)
AtapiVirtToPhysAddr_: f74c1000 -> 00000000:04c78000
  get Phys(data[n=1+2000]=f74c2000)
AtapiVirtToPhysAddr_: f74c2000 -> 00000000:04c79000
  get Phys(data[n=1+3000]=f74c3000)
AtapiVirtToPhysAddr_: f74c3000 -> 00000000:04c7a000
  get Phys(data[n=1+4000]=f74c4000)
AtapiVirtToPhysAddr_: f74c4000 -> 00000000:04c7b000
  get Phys(data[n=1+5000]=f74c5000)
AtapiVirtToPhysAddr_: f74c5000 -> 00000000:04c7c000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 1 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
Intel 0
AtaSetTransferMode: Set 0x42 on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x42 feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238e170 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x60:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x41, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238e140
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  DmaTransfer + !BM_STATUS_INTR (1)
  getting status...
  status 0xc0
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
(../hal/halx86/legacy/halpnpdd.c:793) Illegal IRP: d
(../hal/halx86/legacy/halpnpdd.c:793) Illegal IRP: 14
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 6000, full size 6000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238e140, status 1
AtapiInterrupt: RequestComplete, srb 0xb238e140
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(../ntoskrnl/io/pnpmgr/pnpmgr.c:4059) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb
(../base/setup/usetup/interface/devinst.c:95) Using driver 'i8042prt.sys' for device 'Root\*PNP0303\0000'
(../base/setup/usetup/interface/devinst.c:147) Installing keyboard class driver for 'Root\*PNP0303\0000'
(../ntoskrnl/io/pnpmgr/plugplay.c:766) A new driver will be loaded for 'Root\*PNP0303\0000' (no FDO above)
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238ca18, CDB 0xb238ca48, AtaReq 0xb266d000, SCmd 0x0
UniataNeedQueueing: TopLevel, qd=0
Send to device 0
TopLevel (2), srb 0xb238ca18
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 0
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b238ca48)
  assume 0-transfer
AtapiSendCommand: zero/unaligned transfer 0, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 0
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiDmaReinit: set PIO mode on Device 0 (42 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
Intel 0
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238ca48 Command 0x0 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238ca18
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: wordCount 0x0, WordsTransfered 0x0
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0x0, srb->DataBuffer 0x0, len 0x0
   Transfered 0, full size 0
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238ca18, status 1
AtapiInterrupt: RequestComplete, srb 0xb238ca18
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238e140, CDB 0xb238e170, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238e140
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238e170)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0xc, data f74ac000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74ac000)
AtapiVirtToPhysAddr_: f74ac000 -> 00000000:01195000
  get Phys(data[n=1+1000]=f74ad000)
AtapiVirtToPhysAddr_: f74ad000 -> 00000000:01196000
  get Phys(data[n=1+2000]=f74ae000)
AtapiVirtToPhysAddr_: f74ae000 -> 00000000:0118f000
  get Phys(data[n=2+1000]=f74af000)
AtapiVirtToPhysAddr_: f74af000 -> 00000000:01188000
  get Phys(data[n=3+1000]=f74b0000)
AtapiVirtToPhysAddr_: f74b0000 -> 00000000:01189000
  get Phys(data[n=3+2000]=f74b1000)
AtapiVirtToPhysAddr_: f74b1000 -> 00000000:01192000
  get Phys(data[n=4+1000]=f74b2000)
AtapiVirtToPhysAddr_: f74b2000 -> 00000000:0119b000
  get Phys(data[n=5+1000]=f74b3000)
AtapiVirtToPhysAddr_: f74b3000 -> 00000000:01194000
  get Phys(data[n=6+1000]=f74b4000)
AtapiVirtToPhysAddr_: f74b4000 -> 00000000:0119d000
  get Phys(data[n=7+1000]=f74b5000)
AtapiVirtToPhysAddr_: f74b5000 -> 00000000:0119e000
  get Phys(data[n=7+2000]=f74b6000)
AtapiVirtToPhysAddr_: f74b6000 -> 00000000:01197000
  get Phys(data[n=8+1000]=f74b7000)
AtapiVirtToPhysAddr_: f74b7000 -> 00000000:01190000
  get Phys(data[n=9+1000]=f74b8000)
AtapiVirtToPhysAddr_: f74b8000 -> 00000000:01191000
  get Phys(data[n=9+2000]=f74b9000)
AtapiVirtToPhysAddr_: f74b9000 -> 00000000:0119a000
  get Phys(data[n=10+1000]=f74ba000)
AtapiVirtToPhysAddr_: f74ba000 -> 00000000:011a3000
  get Phys(data[n=11+1000]=f74bb000)
AtapiVirtToPhysAddr_: f74bb000 -> 00000000:0119c000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 12 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
Intel 0
AtaSetTransferMode: Set 0x42 on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x42 feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238e170 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xff:0xff.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x41, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238e140
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  DmaTransfer + !BM_STATUS_INTR (1)
  getting status...
  status 0xc0
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238e140, status 1
AtapiInterrupt: RequestComplete, srb 0xb238e140
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238f280, CDB 0xb238f2b0, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238f280
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238f2b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f74bc000, count a000, lCh 0, dev 0
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74bc000)
AtapiVirtToPhysAddr_: f74bc000 -> 00000000:011a5000
  get Phys(data[n=1+1000]=f74bd000)
AtapiVirtToPhysAddr_: f74bd000 -> 00000000:011a6000
  get Phys(data[n=1+2000]=f74be000)
AtapiVirtToPhysAddr_: f74be000 -> 00000000:0119f000
  get Phys(data[n=2+1000]=f74bf000)
AtapiVirtToPhysAddr_: f74bf000 -> 00000000:01198000
  get Phys(data[n=3+1000]=f74c0000)
AtapiVirtToPhysAddr_: f74c0000 -> 00000000:01199000
  get Phys(data[n=3+2000]=f74c1000)
AtapiVirtToPhysAddr_: f74c1000 -> 00000000:011a2000
  get Phys(data[n=4+1000]=f74c2000)
AtapiVirtToPhysAddr_: f74c2000 -> 00000000:011ab000
  get Phys(data[n=5+1000]=f74c3000)
AtapiVirtToPhysAddr_: f74c3000 -> 00000000:011a4000
  get Phys(data[n=6+1000]=f74c4000)
AtapiVirtToPhysAddr_: f74c4000 -> 00000000:011ad000
  get Phys(data[n=7+1000]=f74c5000)
AtapiVirtToPhysAddr_: f74c5000 -> 00000000:011ae000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 7 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238f2b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xa0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238f280
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered a000, full size a000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238f280, status 1
AtapiInterrupt: RequestComplete, srb 0xb238f280
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238f280, CDB 0xb238f2b0, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238f280
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238f2b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f74ea000, count 2000, lCh 0, dev 0
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74ea000)
AtapiVirtToPhysAddr_: f74ea000 -> 00000000:3f67d000
  get Phys(data[n=1+1000]=f74eb000)
AtapiVirtToPhysAddr_: f74eb000 -> 00000000:3f67e000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 1 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238f2b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x20:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238f280
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238f280, status 1
AtapiInterrupt: RequestComplete, srb 0xb238f280
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(../ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\System32\drivers\i8042prt.sys at F74AC000 with 1a pages
(../ntoskrnl/wmi/smbios.c:172) Could not find the SMBIOS entry point
(../ntoskrnl/wmi/smbios.c:232) WmipGetRawSMBiosTableData failed: 0x08lx
(../drivers/input/i8042prt/hwhacks.c:250) IoWMIOpenBlock failed: 0xc0000225
(../drivers/input/i8042prt/pnp.c:755) IRP_MJ_PNP / unknown minor function 0x9
(../ntoskrnl/io/pnpmgr/pnproot.c:1198) IRP_MJ_PNP / Unknown minor function 0x14
(../ntoskrnl/io/pnpmgr/pnpmgr.c:4059) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb
(../base/setup/usetup/interface/devinst.c:95) Using driver 'pci.sys' for device 'PCI\VEN_8086&DEV_7191&SUBSYS_00000000&REV_03\2&b3ac4ede&01'
(../ntoskrnl/io/pnpmgr/plugplay.c:766) A new driver will be loaded for 'PCI\VEN_8086&DEV_7191&SUBSYS_00000000&REV_03\2&b3ac4ede&01' (no FDO above)
(../ntoskrnl/io/pnpmgr/pnpmgr.c:4059) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb
(../base/setup/usetup/interface/devinst.c:95) Using driver 'pciide.sys' for device 'PCI\VEN_8086&DEV_7111&SUBSYS_00000000&REV_01\2&b3ac4ede&24'
(../ntoskrnl/io/pnpmgr/plugplay.c:766) A new driver will be loaded for 'PCI\VEN_8086&DEV_7111&SUBSYS_00000000&REV_01\2&b3ac4ede&24' (no FDO above)
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238ca18, CDB 0xb238ca48, AtaReq 0xb266d000, SCmd 0x0
UniataNeedQueueing: TopLevel, qd=0
Send to device 0
TopLevel (2), srb 0xb238ca18
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 0
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b238ca48)
  assume 0-transfer
AtapiSendCommand: zero/unaligned transfer 0, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 0
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiDmaReinit: set PIO mode on Device 0 (42 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
Intel 0
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238ca48 Command 0x0 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238ca18
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: wordCount 0x0, WordsTransfered 0x0
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0x0, srb->DataBuffer 0x0, len 0x0
   Transfered 0, full size 0
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238ca18, status 1
AtapiInterrupt: RequestComplete, srb 0xb238ca18
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238ca18, CDB 0xb238ca48, AtaReq 0xb266d000, SCmd 0x0
UniataNeedQueueing: TopLevel, qd=0
Send to device 0
TopLevel (2), srb 0xb238ca18
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 0
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b238ca48)
  assume 0-transfer
AtapiSendCommand: zero/unaligned transfer 0, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 0
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238ca48 Command 0x0 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238ca18
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: wordCount 0x0, WordsTransfered 0x0
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0x0, srb->DataBuffer 0x0, len 0x0
   Transfered 0, full size 0
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238ca18, status 1
AtapiInterrupt: RequestComplete, srb 0xb238ca18
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238f280, CDB 0xb238f2b0, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238f280
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238f2b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0xc, data f74a6000, count 6000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74a6000)
AtapiVirtToPhysAddr_: f74a6000 -> 00000000:04c60000
  get Phys(data[n=1+1000]=f74a7000)
AtapiVirtToPhysAddr_: f74a7000 -> 00000000:04c61000
  get Phys(data[n=1+2000]=f74a8000)
AtapiVirtToPhysAddr_: f74a8000 -> 00000000:04c62000
  get Phys(data[n=1+3000]=f74a9000)
AtapiVirtToPhysAddr_: f74a9000 -> 00000000:04c63000
  get Phys(data[n=1+4000]=f74aa000)
AtapiVirtToPhysAddr_: f74aa000 -> 00000000:04c64000
  get Phys(data[n=1+5000]=f74ab000)
AtapiVirtToPhysAddr_: f74ab000 -> 00000000:04c65000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 1 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
Intel 0
AtaSetTransferMode: Set 0x42 on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x42 feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238f2b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x60:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x41, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238f280
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  DmaTransfer + !BM_STATUS_INTR (1)
  getting status...
  status 0xc0
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 6000, full size 6000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238f280, status 1
AtapiInterrupt: RequestComplete, srb 0xb238f280
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238f280, CDB 0xb238f2b0, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238f280
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238f2b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f749d000, count 9000, lCh 0, dev 0
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f749d000)
AtapiVirtToPhysAddr_: f749d000 -> 00000000:3f32c000
  get Phys(data[n=1+1000]=f749e000)
AtapiVirtToPhysAddr_: f749e000 -> 00000000:3f32d000
  get Phys(data[n=1+2000]=f749f000)
AtapiVirtToPhysAddr_: f749f000 -> 00000000:3f32e000
  get Phys(data[n=1+3000]=f74a0000)
AtapiVirtToPhysAddr_: f74a0000 -> 00000000:3f32f000
  get Phys(data[n=1+4000]=f74a1000)
AtapiVirtToPhysAddr_: f74a1000 -> 00000000:3f330000
  get Phys(data[n=2+1000]=f74a2000)
AtapiVirtToPhysAddr_: f74a2000 -> 00000000:3f331000
  get Phys(data[n=2+2000]=f74a3000)
AtapiVirtToPhysAddr_: f74a3000 -> 00000000:3f32a000
  get Phys(data[n=3+1000]=f74a4000)
AtapiVirtToPhysAddr_: f74a4000 -> 00000000:3f32b000
  get Phys(data[n=3+2000]=f74a5000)
AtapiVirtToPhysAddr_: f74a5000 -> 00000000:3f334000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 4 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238f2b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x90:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238f280
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 9000, full size 9000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238f280, status 1
AtapiInterrupt: RequestComplete, srb 0xb238f280
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238ca18, CDB 0xb238ca48, AtaReq 0xb266d000, SCmd 0x0
UniataNeedQueueing: TopLevel, qd=0
Send to device 0
TopLevel (2), srb 0xb238ca18
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 0
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b238ca48)
  assume 0-transfer
AtapiSendCommand: zero/unaligned transfer 0, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 0
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiDmaReinit: set PIO mode on Device 0 (42 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
Intel 0
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238ca48 Command 0x0 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238ca18
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: wordCount 0x0, WordsTransfered 0x0
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0x0, srb->DataBuffer 0x0, len 0x0
   Transfered 0, full size 0
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238ca18, status 1
AtapiInterrupt: RequestComplete, srb 0xb238ca18
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238f280, CDB 0xb238f2b0, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238f280
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238f2b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0xc, data f74a6000, count 6000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74a6000)
AtapiVirtToPhysAddr_: f74a6000 -> 00000000:04c60000
  get Phys(data[n=1+1000]=f74a7000)
AtapiVirtToPhysAddr_: f74a7000 -> 00000000:04c61000
  get Phys(data[n=1+2000]=f74a8000)
AtapiVirtToPhysAddr_: f74a8000 -> 00000000:04c62000
  get Phys(data[n=1+3000]=f74a9000)
AtapiVirtToPhysAddr_: f74a9000 -> 00000000:04c63000
  get Phys(data[n=1+4000]=f74aa000)
AtapiVirtToPhysAddr_: f74aa000 -> 00000000:04c64000
  get Phys(data[n=1+5000]=f74ab000)
AtapiVirtToPhysAddr_: f74ab000 -> 00000000:04c65000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 1 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
Intel 0
AtaSetTransferMode: Set 0x42 on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x42 feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238f2b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x60:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x41, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238f280
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  DmaTransfer + !BM_STATUS_INTR (1)
  getting status...
  status 0xc0
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 6000, full size 6000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238f280, status 1
AtapiInterrupt: RequestComplete, srb 0xb238f280
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238f280, CDB 0xb238f2b0, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238f280
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238f2b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f74d9000, count 2000, lCh 0, dev 0
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74d9000)
AtapiVirtToPhysAddr_: f74d9000 -> 00000000:3e42c000
  get Phys(data[n=1+1000]=f74da000)
AtapiVirtToPhysAddr_: f74da000 -> 00000000:3e42d000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 1 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238f2b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x20:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238f280
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238f280, status 1
AtapiInterrupt: RequestComplete, srb 0xb238f280
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238ca18, CDB 0xb238ca48, AtaReq 0xb266d000, SCmd 0x0
UniataNeedQueueing: TopLevel, qd=0
Send to device 0
TopLevel (2), srb 0xb238ca18
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 0
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b238ca48)
  assume 0-transfer
AtapiSendCommand: zero/unaligned transfer 0, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 0
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiDmaReinit: set PIO mode on Device 0 (42 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
Intel 0
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238ca48 Command 0x0 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238ca18
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: wordCount 0x0, WordsTransfered 0x0
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0x0, srb->DataBuffer 0x0, len 0x0
   Transfered 0, full size 0
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238ca18, status 1
AtapiInterrupt: RequestComplete, srb 0xb238ca18
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238f280, CDB 0xb238f2b0, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238f280
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238f2b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0xc, data f74a6000, count 6000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74a6000)
AtapiVirtToPhysAddr_: f74a6000 -> 00000000:04c60000
  get Phys(data[n=1+1000]=f74a7000)
AtapiVirtToPhysAddr_: f74a7000 -> 00000000:04c61000
  get Phys(data[n=1+2000]=f74a8000)
AtapiVirtToPhysAddr_: f74a8000 -> 00000000:04c62000
  get Phys(data[n=1+3000]=f74a9000)
AtapiVirtToPhysAddr_: f74a9000 -> 00000000:04c63000
  get Phys(data[n=1+4000]=f74aa000)
AtapiVirtToPhysAddr_: f74aa000 -> 00000000:04c64000
  get Phys(data[n=1+5000]=f74ab000)
AtapiVirtToPhysAddr_: f74ab000 -> 00000000:04c65000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 1 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
Intel 0
AtaSetTransferMode: Set 0x42 on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x42 feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238f2b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x60:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x41, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238f280
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  DmaTransfer + !BM_STATUS_INTR (1)
  getting status...
  status 0xc0
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
(../ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\System32\drivers\pciide.sys at F749E000 with 8 pages
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 6000, full size 6000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238f280, status 1
AtapiInterrupt: RequestComplete, srb 0xb238f280
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238ca18, CDB 0xb238ca48, AtaReq 0xb266d000, SCmd 0x0
UniataNeedQueueing: TopLevel, qd=0
Send to device 0
TopLevel (2), srb 0xb238ca18
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 0
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b238ca48)
  assume 0-transfer
AtapiSendCommand: zero/unaligned transfer 0, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 0
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiDmaReinit: set PIO mode on Device 0 (42 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
Intel 0
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238ca48 Command 0x0 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x9, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238ca18
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: wordCount 0x0, WordsTransfered 0x0
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0x0, srb->DataBuffer 0x0, len 0x0
   Transfered 0, full size 0
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238ca18, status 1
AtapiInterrupt: RequestComplete, srb 0xb238ca18
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238f280, CDB 0xb238f2b0, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238f280
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238f2b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0xc, data f74e1000, count d000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74e1000)
AtapiVirtToPhysAddr_: f74e1000 -> 00000000:3d001000
  get Phys(data[n=1+1000]=f74e2000)
AtapiVirtToPhysAddr_: f74e2000 -> 00000000:3d002000
  get Phys(data[n=1+2000]=f74e3000)
AtapiVirtToPhysAddr_: f74e3000 -> 00000000:3d003000
  get Phys(data[n=1+3000]=f74e4000)
AtapiVirtToPhysAddr_: f74e4000 -> 00000000:3d004000
  get Phys(data[n=1+4000]=f74e5000)
AtapiVirtToPhysAddr_: f74e5000 -> 00000000:3cffd000
  get Phys(data[n=2+1000]=f74e6000)
AtapiVirtToPhysAddr_: f74e6000 -> 00000000:3cffe000
  get Phys(data[n=2+2000]=f74e7000)
AtapiVirtToPhysAddr_: f74e7000 -> 00000000:3cfff000
  get Phys(data[n=2+3000]=f74e8000)
AtapiVirtToPhysAddr_: f74e8000 -> 00000000:3d000000
  get Phys(data[n=3+1000]=f74e9000)
AtapiVirtToPhysAddr_: f74e9000 -> 00000000:3d009000
  get Phys(data[n=4+1000]=f74ea000)
AtapiVirtToPhysAddr_: f74ea000 -> 00000000:3d00a000
  get Phys(data[n=4+2000]=f74eb000)
AtapiVirtToPhysAddr_: f74eb000 -> 00000000:3d00b000
  get Phys(data[n=4+3000]=f74ec000)
AtapiVirtToPhysAddr_: f74ec000 -> 00000000:3d00c000
  get Phys(data[n=4+4000]=f74ed000)
AtapiVirtToPhysAddr_: f74ed000 -> 00000000:3d005000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 5 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
Intel 0
AtaSetTransferMode: Set 0x42 on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x42 feature 0x3
  0x40 3300/2300, 0x44 0/0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238f2b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0xd0:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x41, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238f280
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  DmaTransfer + !BM_STATUS_INTR (1)
  getting status...
  status 0xc0
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered d000, full size d000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238f280, status 1
AtapiInterrupt: RequestComplete, srb 0xb238f280
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238f280, CDB 0xb238f2b0, AtaReq 0xb266d000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb238f280
TopLevel (3), AtaReq 0xb266d000
Try ATAPI send 28
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b238f2b0)
AtapiSendCommand: try DMA setup
AtapiDmaSetup: mode 0x42, data f74a8000, count 2000, lCh 0, dev 0
  get Phys(PRD=b266d060)
AtapiVirtToPhysAddr_: b266d060 -> 00000000:04f6c060
  get Phys(data[0]=f74a8000)
AtapiVirtToPhysAddr_: f74a8000 -> 00000000:3c672000
  get Phys(data[n=1+1000]=f74a9000)
AtapiVirtToPhysAddr_: f74a9000 -> 00000000:3c673000
  set TERM
AtapiDmaSetup: OK
AtapiSendCommand: use dma
AtapiDmaSetup: already setup, 1 entries
AtapiSendCommand: use dma
AtapiSendCommand: use_dma=1, Cmd 28
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: LimitedTransferMode == TransferMode = 42 (103), Device 0, last dev 0
AtapiSendCommand: use_dma=1
  REQ_FLAG_DMA_OPERATION
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238f2b0 Command 0x28 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x1, CntHL:0x20:0x0.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiDmaStart: lchan=0
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238f280
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  ATAPI status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type ATAPI
  OldReqState = 42
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was DmaTransfer
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb238f280, status 1
AtapiInterrupt: RequestComplete, srb 0xb238f280
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(../ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\System32\drivers\pciidex.sys at F74E2000 with c pages
(../hal/halx86/legacy/bus/pcibus.c:698) HAL: No PCI Resource Adjustment done! Hardware may malfunction
(../drivers/storage/ide/pciidex/fdo.c:467) IRP_MJ_PNP / Unknown minor function 0x9
(../base/setup/usetup/interface/devinst.c:95) Using driver 'usbuhci.sys' for device 'PCI\VEN_8086&DEV_7112&SUBSYS_00000000&REV_01\2&b3ac4ede&44'
(../ntoskrnl/io/pnpmgr/plugplay.c:766) A new driver will be loaded for 'PCI\VEN_8086&DEV_7112&SUBSYS_00000000&REV_01\2&b3ac4ede&44' (no FDO above)
(../hal/halx86/legacy/bus/pcibus.c:698) HAL: No PCI Resource Adjustment done! Hardware may malfunction
(../ntoskrnl/io/pnpmgr/pnpmgr.c:4059) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb
(../base/setup/usetup/interface/devinst.c:95) Using driver 'uniata.sys' for device 'PCIIDE\IDEChannel\3&8529cb0b&0'
(../sdk/lib/drivers/libusb/hub_controller.cpp:3991) There was no pending IRP for SCE. Did the usb hub 2.0 driver (usbhub2) load?
(../ntoskrnl/io/pnpmgr/plugplay.c:766) A new driver will be loaded for 'PCIIDE\IDEChannel\3&8529cb0b&0' (no FDO above)
(../base/setup/usetup/interface/devinst.c:95) Using driver 'uniata.sys' for device 'PCIIDE\IDEChannel\3&8529cb0b&1'
(../ntoskrnl/io/pnpmgr/plugplay.c:766) A new driver will be loaded for 'PCIIDE\IDEChannel\3&8529cb0b&1' (no FDO above)
(../base/setup/usetup/interface/devinst.c:95) Using driver 'usbhub.sys' for device 'USB\ROOT_HUB\3&e9f441d4'
(../ntoskrnl/io/pnpmgr/plugplay.c:766) A new driver will be loaded for 'USB\ROOT_HUB\3&e9f441d4' (no FDO above)
(../ntoskrnl/io/pnpmgr/pnpmgr.c:4059) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb
(../sdk/lib/drivers/libusb/hub_controller.cpp:334) [USBUHCI] Change state on port 1
(../sdk/lib/drivers/libusb/hub_controller.cpp:2705) USBHI_CreateUsbDevice
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x1 chan 0x1
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE
  DMA status 0x2
  perform generic check
  getting status...
  IDE status 0x0
  base status 0x0
  no DRQ/DRDY set
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
  Unexpected interrupt.
  OurInterrupt = 0
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
(../sdk/lib/drivers/libusb/usb_device.cpp:314) [USBUHCI] SetDeviceAddress> Address 1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x1
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE
  DMA status 0x2
  perform generic check
  getting status...
  IDE status 0x0
  base status 0x0
  no DRQ/DRDY set
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
  Unexpected interrupt.
  OurInterrupt = 0
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x1
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE
  DMA status 0x2
  perform generic check
  getting status...
  IDE status 0x0
  base status 0x0
  no DRQ/DRDY set
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
  Unexpected interrupt.
  OurInterrupt = 0
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
(../sdk/lib/drivers/libusb/usb_device.cpp:362) [USBUHCI] SetDeviceAddress> device returned bogus device descriptor
(../sdk/lib/drivers/libusb/usb_device.cpp:844) Dumping Device Descriptor B238F2F0
(../sdk/lib/drivers/libusb/usb_device.cpp:845) bLength 12
(../sdk/lib/drivers/libusb/usb_device.cpp:846) bDescriptorType 1
(../sdk/lib/drivers/libusb/usb_device.cpp:847) bcdUSB 110
(../sdk/lib/drivers/libusb/usb_device.cpp:848) bDeviceClass 9
(../sdk/lib/drivers/libusb/usb_device.cpp:849) bDeviceSubClass 0
(../sdk/lib/drivers/libusb/usb_device.cpp:850) bDeviceProtocol 0
(../sdk/lib/drivers/libusb/usb_device.cpp:851) bMaxPacketSize0 8
(../sdk/lib/drivers/libusb/usb_device.cpp:852) idVendor 0
(../sdk/lib/drivers/libusb/usb_device.cpp:853) idProduct 0
(../sdk/lib/drivers/libusb/usb_device.cpp:854) bcdDevice 0
(../sdk/lib/drivers/libusb/usb_device.cpp:855) iManufacturer 0
(../sdk/lib/drivers/libusb/usb_device.cpp:856) iProduct 0
(../sdk/lib/drivers/libusb/usb_device.cpp:857) iSerialNumber 0
(../sdk/lib/drivers/libusb/usb_device.cpp:858) bNumConfigurations 0
(../sdk/lib/drivers/libusb/usb_device.cpp:314) [USBUHCI] SetDeviceAddress> Address 1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x1
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE
  DMA status 0x2
  perform generic check
  getting status...
  IDE status 0x0
  base status 0x0
  no DRQ/DRDY set
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
  Unexpected interrupt.
  OurInterrupt = 0
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x1
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE
  DMA status 0x2
  perform generic check
  getting status...
  IDE status 0x0
  base status 0x0
  no DRQ/DRDY set
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
  Unexpected interrupt.
  OurInterrupt = 0
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
(../sdk/lib/drivers/libusb/usb_device.cpp:362) [USBUHCI] SetDeviceAddress> device returned bogus device descriptor
(../sdk/lib/drivers/libusb/usb_device.cpp:844) Dumping Device Descriptor B238F2F0
(../sdk/lib/drivers/libusb/usb_device.cpp:845) bLength 12
(../sdk/lib/drivers/libusb/usb_device.cpp:846) bDescriptorType 1
(../sdk/lib/drivers/libusb/usb_device.cpp:847) bcdUSB 110
(../sdk/lib/drivers/libusb/usb_device.cpp:848) bDeviceClass 9
(../sdk/lib/drivers/libusb/usb_device.cpp:849) bDeviceSubClass 0
(../sdk/lib/drivers/libusb/usb_device.cpp:850) bDeviceProtocol 0
(../sdk/lib/drivers/libusb/usb_device.cpp:851) bMaxPacketSize0 8
(../sdk/lib/drivers/libusb/usb_device.cpp:852) idVendor 0
(../sdk/lib/drivers/libusb/usb_device.cpp:853) idProduct 0
(../sdk/lib/drivers/libusb/usb_device.cpp:854) bcdDevice 0
(../sdk/lib/drivers/libusb/usb_device.cpp:855) iManufacturer 0
(../sdk/lib/drivers/libusb/usb_device.cpp:856) iProduct 0
(../sdk/lib/drivers/libusb/usb_device.cpp:857) iSerialNumber 0
(../sdk/lib/drivers/libusb/usb_device.cpp:858) bNumConfigurations 0
(../sdk/lib/drivers/libusb/usb_device.cpp:314) [USBUHCI] SetDeviceAddress> Address 1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x1
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE
  DMA status 0x2
  perform generic check
  getting status...
  IDE status 0x0
  base status 0x0
  no DRQ/DRDY set
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
  Unexpected interrupt.
  OurInterrupt = 0
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x1
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE
  DMA status 0x2
  perform generic check
  getting status...
  IDE status 0x0
  base status 0x0
  no DRQ/DRDY set
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
  Unexpected interrupt.
  OurInterrupt = 0
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
(../sdk/lib/drivers/libusb/usb_device.cpp:362) [USBUHCI] SetDeviceAddress> device returned bogus device descriptor
(../sdk/lib/drivers/libusb/usb_device.cpp:844) Dumping Device Descriptor B238F2F0
(../sdk/lib/drivers/libusb/usb_device.cpp:845) bLength 12
(../sdk/lib/drivers/libusb/usb_device.cpp:846) bDescriptorType 1
(../sdk/lib/drivers/libusb/usb_device.cpp:847) bcdUSB 110
(../sdk/lib/drivers/libusb/usb_device.cpp:848) bDeviceClass 9
(../sdk/lib/drivers/libusb/usb_device.cpp:849) bDeviceSubClass 0
(../sdk/lib/drivers/libusb/usb_device.cpp:850) bDeviceProtocol 0
(../sdk/lib/drivers/libusb/usb_device.cpp:851) bMaxPacketSize0 8
(../sdk/lib/drivers/libusb/usb_device.cpp:852) idVendor 0
(../sdk/lib/drivers/libusb/usb_device.cpp:853) idProduct 0
(../sdk/lib/drivers/libusb/usb_device.cpp:854) bcdDevice 0
(../sdk/lib/drivers/libusb/usb_device.cpp:855) iManufacturer 0
(../sdk/lib/drivers/libusb/usb_device.cpp:856) iProduct 0
(../sdk/lib/drivers/libusb/usb_device.cpp:857) iSerialNumber 0
(../sdk/lib/drivers/libusb/usb_device.cpp:858) bNumConfigurations 0
(../sdk/lib/drivers/libusb/usb_device.cpp:314) [USBUHCI] SetDeviceAddress> Address 1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x1
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE
  DMA status 0x2
  perform generic check
  getting status...
  IDE status 0x0
  base status 0x0
  no DRQ/DRDY set
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
  Unexpected interrupt.
  OurInterrupt = 0
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x1
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x1, lch 0x1 DmaTransfer = FALSE
  DMA status 0x2
  perform generic check
  getting status...
  IDE status 0x0
  base status 0x0
  no DRQ/DRDY set
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x0
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
  Unexpected interrupt.
  OurInterrupt = 0
AtapiInterrupt(base): set CHECK_INTR_IDLE (2)
AtapiInterrupt(base): exit with status 0x0
(../sdk/lib/drivers/libusb/usb_device.cpp:362) [USBUHCI] SetDeviceAddress> device returned bogus device descriptor
(../sdk/lib/drivers/libusb/usb_device.cpp:844) Dumping Device Descriptor B238F2F0
(../sdk/lib/drivers/libusb/usb_device.cpp:845) bLength 12
(../sdk/lib/drivers/libusb/usb_device.cpp:846) bDescriptorType 1
(../sdk/lib/drivers/libusb/usb_device.cpp:847) bcdUSB 110
(../sdk/lib/drivers/libusb/usb_device.cpp:848) bDeviceClass 9
(../sdk/lib/drivers/libusb/usb_device.cpp:849) bDeviceSubClass 0
(../sdk/lib/drivers/libusb/usb_device.cpp:850) bDeviceProtocol 0
(../sdk/lib/drivers/libusb/usb_device.cpp:851) bMaxPacketSize0 8
(../sdk/lib/drivers/libusb/usb_device.cpp:852) idVendor 0
(../sdk/lib/drivers/libusb/usb_device.cpp:853) idProduct 0
(../sdk/lib/drivers/libusb/usb_device.cpp:854) bcdDevice 0
(../sdk/lib/drivers/libusb/usb_device.cpp:855) iManufacturer 0
(../sdk/lib/drivers/libusb/usb_device.cpp:856) iProduct 0
(../sdk/lib/drivers/libusb/usb_device.cpp:857) iSerialNumber 0
(../sdk/lib/drivers/libusb/usb_device.cpp:858) bNumConfigurations 0
(../sdk/lib/drivers/libusb/hub_controller.cpp:2859) USBHI_InitializeUsbDevice failed to set address with c0000001
(../drivers/usb/usbhub/fdo.c:1259) USBHUB: InitializeUsbDevice failed with status c000009c
(../ntoskrnl/io/iomgr/file.c:554) Using IopParseDevice() hack. Requested invalid attributes: 1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xf74f7a30, CDB 0xf74f7a60, AtaReq 0xb23e9000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf74f7a30
TopLevel (3), AtaReq 0xb23e9000
Try ATAPI send 25
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f74f7a60)
  assume IN
AtapiSendCommand: zero/unaligned transfer 8, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 25
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f74f7a60 Command 0x25 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: F:0x0, CntHL:0x0:0x8.
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f74f7a30
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x51
  base status 0x51
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x51)
AtapiInterrupt: iReason 3
AtapiInterrupt: Error 0x24
  Bad Lba 0x0
  wait 10 ready after ATAPI error
  Intr on DRQ 0
AtapiInterrupt: ATAPI Error, int reason 3
Errors in PIO mode
AtapiInterrupt: Error
AtapiInterrupt: CompleteRequest, srbstatus 4
AtapiInterrupt: Error. Begin mapping...
MapError: Error register is 0x24
ATAPI: Device not ready
AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xf74f7a30, status 4
AtapiInterrupt: RequestComplete, srb 0xf74f7a30
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   DeviceID+VendorID/Rev 0x71118086/0x1
  SRB 0xb238c210, CDB 0xb238c240, AtaReq 0xb23e9000, SCmd 0x3
UniataNeedQueueing: TopLevel, qd=0
Send to device 3
TopLevel (2), srb 0xb238c210
TopLevel (3), AtaReq 0xb23e9000
Try ATAPI send 3
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b238c240)
  assume IN
AtapiSendCommand: SCSIOP_REQUEST_SENSE, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 3
AtapiSendCommand: SCSIOP_REQUEST_SENSE -> no dma setup (2)
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 1
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b238c240 Command 0x3 to TargetId 1 lun 0
AtapiSendCommand: Entered with status 0x51
  continue with SCSIOP_REQUEST_SENSE
AtapiSendCommand: Entry Status (0x51)
AtapiSendCommand: F:0x0, CntHL:0x0:0x12.
AtapiSendCommand: Poll for int. to send packet. Status (0x51)
AtapiSendCommand: status (0x58)
AtapiSendCommand: ready for packet, status 0x1, i=0
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b238c210
AtapiStartIo: query PORT for next request
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R byteCount 0x12
IdeIntr: Read 0x9 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf74a6aa0, srb->DataBuffer 0xf74a6aa0
70 00 02 00 00 00 00 0a 00 00 00 00 3a 00 00 00 
00 00 
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf74a6ab2, srb->DataBuffer 0xf74a6aa0, len 0x12
   Transfered 12, full size 12
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xb238c210, status 1
AtapiInterrupt: RequestComplete, srb 0xb238c210
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: DeviceID+VendorID/Rev 0x71118086/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 3
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
(../ntoskrnl/io/iomgr/file.c:554) Using IopParseDevice() hack. Requested invalid attributes: 1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23937b8, CDB 0xb23937e8, AtaReq 0xb2395000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23937b8
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74f7964
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f74a74a0, count 200, lCh 0, dev 0
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74a74a0)
AtapiVirtToPhysAddr_: f74a74a0 -> 00000000:02fde4a0
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b23937b8
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x12, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23937b8, status 1
AtapiInterrupt: RequestComplete, srb 0xb23937b8
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(../base/setup/usetup/partlist.c:1308) Buffer size: 136
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23937b8, CDB 0xb23937e8, AtaReq 0xb2395000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23937b8
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74f76d8
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f74a7000, count 200, lCh 0, dev 0
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74a7000)
AtapiVirtToPhysAddr_: f74a7000 -> 00000000:04c7b000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b23937b8
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x12, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23937b8, status 1
AtapiInterrupt: RequestComplete, srb 0xb23937b8
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(../drivers/storage/class/disk/disk.c:2251) HACK: Handling partition 0 request!
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23937b8, CDB 0xb23937e8, AtaReq 0xb2395000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23937b8
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74f7740
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f74a78b8, count 200, lCh 0, dev 0
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74a78b8)
AtapiVirtToPhysAddr_: f74a78b8 -> 00000000:04c7c8b8
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b23937b8
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x12, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23937b8, status 1
AtapiInterrupt: RequestComplete, srb 0xb23937b8
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(../base/setup/usetup/partlist.c:1342) PartitionCount: 4
(../base/setup/usetup/partlist.c:3159) We are here (1)!
(../base/setup/usetup/partlist.c:3201) We are here (2)!
(../base/setup/usetup/partlist.c:3248) We are here (3)!
(../base/setup/usetup/partlist.c:3274) Found active system partition 3 in disk 1, drive letter E
(../base/setup/usetup/fslist.c:105) File system not found, try to guess one...
(../base/setup/usetup/fslist.c:146) Recognized file system NTFS that doesn't support write support yet!
(../base/setup/usetup/fslist.c:149) GetFileSystem -- PartitionType: 0x07 ; FileSystemName (guessed): NTFS
(../base/setup/usetup/partlist.c:3313) System partition 3 in disk 1 with no FS?!
(../base/setup/usetup/partlist.c:3356) Use alternative active system partition 1 in disk 1, drive letter C
(../base/setup/usetup/interface/usetup.c:2618) FormatState: Start --> FormatInstallPartition
(../ntoskrnl/io/iomgr/file.c:554) Using IopParseDevice() hack. Requested invalid attributes: 11f
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23937b8, CDB 0xb23937e8, AtaReq 0xb2395000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23937b8
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74f76f0
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f74a7000, count 200, lCh 0, dev 0
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74a7000)
AtapiVirtToPhysAddr_: f74a7000 -> 00000000:04c7b000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b23937b8
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x12, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23937b8, status 1
AtapiInterrupt: RequestComplete, srb 0xb23937b8
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23937b8, CDB 0xb23937e8, AtaReq 0xb2395000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb23937b8
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74f7758
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f74a7000, count 200, lCh 0, dev 0
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74a7000)
AtapiVirtToPhysAddr_: f74a7000 -> 00000000:04c7b000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b23937b8
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x12, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb23937b8, status 1
AtapiInterrupt: RequestComplete, srb 0xb23937b8
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23937b8, CDB 0xb23937e8, AtaReq 0xb2395000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb23937b8
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74f7758
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f74a7000, count 200, lCh 0, dev 0
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74a7000)
AtapiVirtToPhysAddr_: f74a7000 -> 00000000:04c7b000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (1a01), Device 0, last dev 0
IdeReadWrite: Lba 0x0, Count 0x1(0x1)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xca, lba 0x0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b23937b8
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 2)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x51
  base status 0x51
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x12, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x51)
AtapiInterrupt: Error 0x84
  Bad Lba 0x0
  wait 100 ready after IDE error
  Intr on DRQ 0
Errors in DMA mode
AtapiInterrupt: NextRequest, srb=0xb23937b8
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23937b8, CDB 0xb23937e8, AtaReq 0xb2395000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809e0a9c
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: already setup, 1 entries
AtapiDmaReinit: FORCE_DOWNRATE on Device 0
AtapiDmaReinit: set MAX mode on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x44
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
IDE_STATUS_ERROR detected on entry, statusByte = 0x51
Setup chip a:w:u=4:2:2
AtaSetTransferMode: Set 0x42 on Device 0/0
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x42 feature 0x3
IdeReadWrite: Lba 0x0, Count 0x1(0x1)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xca, lba 0x0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b23937b8
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x4d38105a/0x1 (ex 1)
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x1:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x51
  base status 0x51
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x12, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x51)
AtapiInterrupt: Error 0x84
  Bad Lba 0x0
  wait 100 ready after IDE error
  Intr on DRQ 0
Errors in DMA mode
AtapiInterrupt: NextRequest, srb=0xb23937b8
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23937b8, CDB 0xb23937e8, AtaReq 0xb2395000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809e0a9c
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: already setup, 1 entries
AtapiDmaReinit: FORCE_DOWNRATE on Device 0
AtapiDmaReinit: set MAX mode on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x44
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
IDE_STATUS_ERROR detected on entry, statusByte = 0x51
Setup chip a:w:u=4:2:-1
AtaSetTransferMode: Set 0x22 on Device 0/0
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x22 feature 0x3
IdeReadWrite: Lba 0x0, Count 0x1(0x1)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xca, lba 0x0 count 0x1 feature 0x0
AtapiDmaStart: lchan=0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b23937b8
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiResetController(0)
AtapiResetController: Reset IDE 0x105a/0x4d38 @ 0xa
simplexOnly 0, VM 0
AtapiResetController: Reset lchannel 0[0]
  CompleteType 0x1, Luns 2, chan 0xb26688e0, sptr 0x809e0aec, flags 0x5
  Lun 0
AtapiResetController: pending SRB 0xb23937b8, chan 0xb26688e0
  senseBuffer 0xb2396000, chan 0xb26688e0, ReqFlags 0x7
AtapiResetController: report SCSI_SENSE_UNIT_ATTENTION + SCSI_ADSENSE_BUS_RESET
Save IDE retry status 2
do nothing
chan 0xb26688e0
  ATA path, chan 0xb26688e0
  disable intr (0)
AtapiDisableInterrupts_0: 0
  done
  check DMA engine
  DMA status 0x1
AtapiDmaDone: dev 0
  process connected devices 0 - 1
  Chan 0xb26688e0
  Lun 0x0
  Lun ptr 0xb23e6000
  HDD at home
AtapiResetController: IdeHardReset failed
 set DFLAGS_REINIT_DMA
  Chan 0xb26688e0
  Lun 0x1
  Lun ptr 0xb23e6318
  HDD at home
CheckDevice: Device 0x1
CheckDevice: reset dev
AtapiSoftReset:
  statusByte2 0:
 set DFLAGS_REINIT_DMA
  DMA status 0x0
  HDD at home
  HDD at home
CheckDevice: status 0x0
CheckDevice: IDE device check
IssueIdentify: Checking for IDE. Status (0x0)
IssueIdentify: statusByte != IDE_STATUS_IDLE
IssueIdentify: no dev (dev 1)
CheckDevice: try ATAPI 0x1, status 0x0
IssueIdentify: Checking for ATAPI. Status (0x0)
IssueIdentify: Checking for ATAPI (2). Status (0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
IssueIdentify: 0-status, not present
CheckDevice: Device 0x1 not responding
CheckDevice: check status: not found
AtapiResetController: deviceExtension->chan[0].DisableIntr 1 -> 1
AtapiEnableInterrupts_0: 1
AtapiChipInit: dev 0xffffffff, ph chan 0, c 0
HwFlags: 0x1
VendorID/DeviceID/Rev 0x105a/0x4d38/0x1
FindDevices:
AtapiDisableInterrupts_0: 0
  max_ldev 2
CheckDevice: Device 0x0
CheckDevice: reset dev
AtapiSoftReset:
  statusByte2 0:
 set DFLAGS_REINIT_DMA
  DMA status 0x0
  HDD at home
  HDD at home
CheckDevice: status 0x50
CheckDevice: IDE device check
IssueIdentify: Checking for IDE. Status (0x50)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0
  retry waiting DRQ, status 0xd0
  retry waiting DRQ, status 0xd0
  retry waiting DRQ, status 0xd0
  retry waiting DRQ, status 0xd0
IssueIdentify: !IDE_STATUS_DRQ (0xd0)
IssueIdentify: DRQ never asserted (0xd0). Error reg (0xd0)
AtapiSoftReset:
  statusByte2 d0:
 set DFLAGS_REINIT_DMA
  DMA status 0x0
AtapiDisableInterrupts_0: 1
AtapiEnableInterrupts_0: 2
IssueIdentify: Status after soft reset (0x58)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0
IssueIdentify: IDE_STATUS_DRQ (0x58)
IssueIdentify: Status before read words 0x58
IssueIdentify: statusByte 0x58
IssueIdentify: BASE statusByte 0x58
  use 16bit IO
IssueIdentify: suck data port
IssueIdentify: statusByte 0x50
IssueIdentify: statusByte 0x50
IssueIdentify: Status after read words 0x50
Model: TS830022 A          
FW:    .333
S/N:   K31BK1XP            
Pio:   2
APio:  3
SWDMA: 0
MWDMA: 4
UDMA:  0/3f
SATA:  0
SATA support: 0, CAPs 0x0
OrigTransferMode: 45, Active: 22
Accoustic 128, cur 128
AdvPowerMode 0
PowerMngt 1/1, APM 0/0
PhysLogSectorSize 0x0, 0x0, offset 0x0
NV PM_Sup 0, PM_En 0, En 0, PM ver 0x0 ver 0x0
R-rate 0
WC 1/1, LA 1/1, WB 1/1, RB 1/1, Q 0/0
Protected 1/1 status 0x1, rev 0x0
CHS 0x3fff:0x10:0x3f
NumOfSectors 0xfbfc10
NumberOfCylinders == 0x3fff
cylinders 0x25db5
NumOfSectors 0x950f8b0
SupportLba flag 0x1
SupportDMA flag 0x1
SoftReset 0x0
SupportIordy 0x1, DisableIordy 0x1
MajorRevision 0x7e
UserAddressableSectors 0x950f8b0
LBA mode
requested LunExt->GeomType=0
tmp_cylinders = 0x25db5
Use GEOM_STD, CHS=2601/ff/3f
Geometry: C 0x2601 (0x2601)
Geometry: H 0xff (0xff)
Geometry: S 0x3f (0x3f)
InitBadBlocks local
LunExt 0xb23e6000
S/N:ST380022A_______________________________-3KB11KPX____________
IssueIdentify: Device does not interrupt on assertion of DRQ.
IssueIdentify: hard drive.
IssueIdentify: final Status on exit (0x50)
CheckDevice: Device 0x0 is IDE
CheckDevice: check status: found
CheckDevice: Device 0x1
CheckDevice: reset dev
AtapiSoftReset:
  statusByte2 50:
 set DFLAGS_REINIT_DMA
  DMA status 0x0
  HDD at home
  HDD at home
CheckDevice: status 0x0
CheckDevice: IDE device check
IssueIdentify: Checking for IDE. Status (0x0)
IssueIdentify: statusByte != IDE_STATUS_IDLE
IssueIdentify: no dev (dev 1)
CheckDevice: try ATAPI 0x1, status 0x0
IssueIdentify: Checking for ATAPI. Status (0x0)
IssueIdentify: Checking for ATAPI (2). Status (0x0)
AtaCommand48: cntrlr 0x1:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
IssueIdentify: 0-status, not present
CheckDevice: Device 0x1 not responding
CheckDevice: check status: not found
FindDevices: select 0 dev to clear INTR
FindDevices: statusByte=0x50
FindDevices: select 1 dev to clear INTR
FindDevices: statusByte=0x0
FindDevices: select 0 dev on exit
AtapiEnableInterrupts_0: 1
FindDevices: returning 1
AtapiHwInitialize: lChannel 0x0, dev 0
AtapiDisableInterrupts_0: 0
AtapiHwInitialize: IDE branch
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x10 feature 0x0
AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 16
  Try Enable Read Cache
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa
  Try Enable Write Cache
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2
  Try Enable Acoustic Mgmt
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x80 feature 0x42
  try mode 0x44
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x44
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x4
Setup chip a:w:u=4:2:4
AtaSetTransferMode: Set 0x44 on Device 0/0
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x44 feature 0x3
Using 0x44 mode
AtapiEnableInterrupts_0: 1
AtapiHwInitialize: lChannel 0x0, dev 1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23937b8, CDB 0xb23937e8, AtaReq 0xb2395000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb23937b8
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809e0a2c
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
IdeReadWrite: Retry after BUS_RESET 3 @0x0 (0x1)
AtapiDmaSetup: mode 0x44, data f74a7000, count 200, lCh 0, dev 0
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74a7000)
AtapiVirtToPhysAddr_: f74a7000 -> 00000000:04c7b000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: FORCE_DOWNRATE on Device 0
AtapiDmaReinit: set MAX mode on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x44
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
IdeReadWrite: Lba 0x0, Count 0x1(0x1)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc5, lba 0x0 count 0x1 feature 0x0
  retry waiting DRQ, status 0xd0
  retry waiting DRQ, status 0xd0
  retry waiting DRQ, status 0xd0
  retry waiting DRQ, status 0xd0
IdeReadWrite: DRQ never asserted (0xd0)
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xb23937b8 complete with status 0x9
AtapiStartIo: AtapiDmaDBSync(b26688e0, b23937b8)
AtapiStartIo: UniataRemoveRequest(b26688e0, b23937b8)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26688e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23937b8, CDB 0xb23937e8, AtaReq 0xb2395000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb23937b8
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809e09bc
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0xc, data f74a7000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74a7000)
AtapiVirtToPhysAddr_: f74a7000 -> 00000000:04c7b000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x44
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x4
Can't setup transfer mode: statusByte = 0xd0
IdeReadWrite: Lba 0x0, Count 0x1(0x1)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc5, lba 0x0 count 0x1 feature 0x0
  Returning BUSY status
IdeReadWrite: DRQ never asserted (0xd0)
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xb23937b8 complete with status 0x9
AtapiStartIo: AtapiDmaDBSync(b26688e0, b23937b8)
AtapiStartIo: UniataRemoveRequest(b26688e0, b23937b8)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26688e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23937b8, CDB 0xb23937e8, AtaReq 0xb2395000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb23937b8
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809e09bc
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x0, data f74a7000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74a7000)
AtapiVirtToPhysAddr_: f74a7000 -> 00000000:04c7b000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x44
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x4
Can't setup transfer mode: statusByte = 0xd0
IdeReadWrite: Lba 0x0, Count 0x1(0x1)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc5, lba 0x0 count 0x1 feature 0x0
  Returning BUSY status
IdeReadWrite: DRQ never asserted (0xd0)
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xb23937b8 complete with status 0x9
AtapiStartIo: AtapiDmaDBSync(b26688e0, b23937b8)
AtapiStartIo: UniataRemoveRequest(b26688e0, b23937b8)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26688e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23937b8, CDB 0xb23937e8, AtaReq 0xb2395000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb23937b8
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809e09bc
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x0, data f74a7000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74a7000)
AtapiVirtToPhysAddr_: f74a7000 -> 00000000:04c7b000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x44
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x4
Can't setup transfer mode: statusByte = 0xd0
IdeReadWrite: Lba 0x0, Count 0x1(0x1)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc5, lba 0x0 count 0x1 feature 0x0
  Returning BUSY status
IdeReadWrite: DRQ never asserted (0xd0)
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xb23937b8 complete with status 0x9
AtapiStartIo: AtapiDmaDBSync(b26688e0, b23937b8)
AtapiStartIo: UniataRemoveRequest(b26688e0, b23937b8)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26688e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23937b8, CDB 0xb23937e8, AtaReq 0xb2395000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb23937b8
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809e09bc
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x0, data f74a7000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74a7000)
AtapiVirtToPhysAddr_: f74a7000 -> 00000000:04c7b000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x44
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x4
Can't setup transfer mode: statusByte = 0xd0
IdeReadWrite: Lba 0x0, Count 0x1(0x1)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc5, lba 0x0 count 0x1 feature 0x0
  Returning BUSY status
IdeReadWrite: DRQ never asserted (0xd0)
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xb23937b8 complete with status 0x9
AtapiStartIo: AtapiDmaDBSync(b26688e0, b23937b8)
AtapiStartIo: UniataRemoveRequest(b26688e0, b23937b8)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26688e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23937b8, CDB 0xb23937e8, AtaReq 0xb2395000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb23937b8
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809e09bc
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x0, data f74a7000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74a7000)
AtapiVirtToPhysAddr_: f74a7000 -> 00000000:04c7b000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x44
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x4
Can't setup transfer mode: statusByte = 0xd0
IdeReadWrite: Lba 0x0, Count 0x1(0x1)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc5, lba 0x0 count 0x1 feature 0x0
  Returning BUSY status
IdeReadWrite: DRQ never asserted (0xd0)
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xb23937b8 complete with status 0x9
AtapiStartIo: AtapiDmaDBSync(b26688e0, b23937b8)
AtapiStartIo: UniataRemoveRequest(b26688e0, b23937b8)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26688e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23937b8, CDB 0xb23937e8, AtaReq 0xb2395000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb23937b8
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809e09bc
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x0, data f74a7000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74a7000)
AtapiVirtToPhysAddr_: f74a7000 -> 00000000:04c7b000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x44
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x4
Can't setup transfer mode: statusByte = 0xd0
IdeReadWrite: Lba 0x0, Count 0x1(0x1)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc5, lba 0x0 count 0x1 feature 0x0
  Returning BUSY status
IdeReadWrite: DRQ never asserted (0xd0)
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xb23937b8 complete with status 0x9
AtapiStartIo: AtapiDmaDBSync(b26688e0, b23937b8)
AtapiStartIo: UniataRemoveRequest(b26688e0, b23937b8)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26688e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23937b8, CDB 0xb23937e8, AtaReq 0xb2395000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb23937b8
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809e09bc
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x0, data f74a7000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74a7000)
AtapiVirtToPhysAddr_: f74a7000 -> 00000000:04c7b000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x44
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x4
Can't setup transfer mode: statusByte = 0xd0
IdeReadWrite: Lba 0x0, Count 0x1(0x1)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc5, lba 0x0 count 0x1 feature 0x0
  Returning BUSY status
IdeReadWrite: DRQ never asserted (0xd0)
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xb23937b8 complete with status 0x9
AtapiStartIo: AtapiDmaDBSync(b26688e0, b23937b8)
AtapiStartIo: UniataRemoveRequest(b26688e0, b23937b8)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26688e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23937b8, CDB 0xb23937e8, AtaReq 0xb2395000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb23937b8
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809e09bc
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x0, data f74a7000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74a7000)
AtapiVirtToPhysAddr_: f74a7000 -> 00000000:04c7b000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x44
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x4
Can't setup transfer mode: statusByte = 0xd0
IdeReadWrite: Lba 0x0, Count 0x1(0x1)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc5, lba 0x0 count 0x1 feature 0x0
  Returning BUSY status
IdeReadWrite: DRQ never asserted (0xd0)
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xb23937b8 complete with status 0x9
AtapiStartIo: AtapiDmaDBSync(b26688e0, b23937b8)
AtapiStartIo: UniataRemoveRequest(b26688e0, b23937b8)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26688e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23937b8, CDB 0xb23937e8, AtaReq 0xb2395000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb23937b8
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809e09bc
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x0, data f74a7000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74a7000)
AtapiVirtToPhysAddr_: f74a7000 -> 00000000:04c7b000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x44
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x4
Can't setup transfer mode: statusByte = 0xd0
IdeReadWrite: Lba 0x0, Count 0x1(0x1)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc5, lba 0x0 count 0x1 feature 0x0
  Returning BUSY status
IdeReadWrite: DRQ never asserted (0xd0)
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xb23937b8 complete with status 0x9
AtapiStartIo: AtapiDmaDBSync(b26688e0, b23937b8)
AtapiStartIo: UniataRemoveRequest(b26688e0, b23937b8)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26688e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23937b8, CDB 0xb23937e8, AtaReq 0xb2395000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb23937b8
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809e09bc
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x0, data f74a7000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74a7000)
AtapiVirtToPhysAddr_: f74a7000 -> 00000000:04c7b000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x44
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x4
Can't setup transfer mode: statusByte = 0xd0
IdeReadWrite: Lba 0x0, Count 0x1(0x1)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc5, lba 0x0 count 0x1 feature 0x0
  Returning BUSY status
IdeReadWrite: DRQ never asserted (0xd0)
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xb23937b8 complete with status 0x9
AtapiStartIo: AtapiDmaDBSync(b26688e0, b23937b8)
AtapiStartIo: UniataRemoveRequest(b26688e0, b23937b8)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26688e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23937b8, CDB 0xb23937e8, AtaReq 0xb2395000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb23937b8
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809e09bc
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x0, data f74a7000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74a7000)
AtapiVirtToPhysAddr_: f74a7000 -> 00000000:04c7b000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x44
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x4
Can't setup transfer mode: statusByte = 0xd0
IdeReadWrite: Lba 0x0, Count 0x1(0x1)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc5, lba 0x0 count 0x1 feature 0x0
  Returning BUSY status
IdeReadWrite: DRQ never asserted (0xd0)
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xb23937b8 complete with status 0x9
AtapiStartIo: AtapiDmaDBSync(b26688e0, b23937b8)
AtapiStartIo: UniataRemoveRequest(b26688e0, b23937b8)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26688e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23937b8, CDB 0xb23937e8, AtaReq 0xb2395000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb23937b8
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809e09bc
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x0, data f74a7000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74a7000)
AtapiVirtToPhysAddr_: f74a7000 -> 00000000:04c7b000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x44
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x4
Can't setup transfer mode: statusByte = 0xd0
IdeReadWrite: Lba 0x0, Count 0x1(0x1)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc5, lba 0x0 count 0x1 feature 0x0
  Returning BUSY status
IdeReadWrite: DRQ never asserted (0xd0)
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xb23937b8 complete with status 0x9
AtapiStartIo: AtapiDmaDBSync(b26688e0, b23937b8)
AtapiStartIo: UniataRemoveRequest(b26688e0, b23937b8)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26688e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23937b8, CDB 0xb23937e8, AtaReq 0xb2395000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb23937b8
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809e09bc
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x0, data f74a7000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74a7000)
AtapiVirtToPhysAddr_: f74a7000 -> 00000000:04c7b000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x44
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x4
Can't setup transfer mode: statusByte = 0xd0
IdeReadWrite: Lba 0x0, Count 0x1(0x1)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc5, lba 0x0 count 0x1 feature 0x0
  Returning BUSY status
IdeReadWrite: DRQ never asserted (0xd0)
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xb23937b8 complete with status 0x9
AtapiStartIo: AtapiDmaDBSync(b26688e0, b23937b8)
AtapiStartIo: UniataRemoveRequest(b26688e0, b23937b8)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26688e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
(../base/setup/usetup/partlist.c:3424) IOCTL_DISK_SET_DRIVE_LAYOUT failed (Status 0xc00000b5)
(../ntoskrnl/io/iomgr/file.c:554) Using IopParseDevice() hack. Requested invalid attributes: 11f
(../sdk/lib/fslib/vfatlib/vfatlib.c:232) WARNING: Failed to lock volume for formatting! Format may fail! (Status: 0xc0000010)
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23908e0, CDB 0xb2390910, AtaReq 0xb2395000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb23908e0
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74f7954
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x0, data f74a7878, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74a7878)
AtapiVirtToPhysAddr_: f74a7878 -> 00000000:02fde878
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x44
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x4
Can't setup transfer mode: statusByte = 0xd0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
  Returning BUSY status
IdeReadWrite: DRQ never asserted (0xd0)
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xb23908e0 complete with status 0x9
AtapiStartIo: AtapiDmaDBSync(b26688e0, b23908e0)
AtapiStartIo: UniataRemoveRequest(b26688e0, b23908e0)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26688e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23908e0, CDB 0xb2390910, AtaReq 0xb2395000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb23908e0
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf757cc90
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x0, data f74a7878, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74a7878)
AtapiVirtToPhysAddr_: f74a7878 -> 00000000:02fde878
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x44
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x4
Can't setup transfer mode: statusByte = 0xd0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
  Returning BUSY status
IdeReadWrite: DRQ never asserted (0xd0)
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xb23908e0 complete with status 0x9
AtapiStartIo: AtapiDmaDBSync(b26688e0, b23908e0)
AtapiStartIo: UniataRemoveRequest(b26688e0, b23908e0)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26688e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23908e0, CDB 0xb2390910, AtaReq 0xb2395000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb23908e0
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf757cc90
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x0, data f74a7878, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74a7878)
AtapiVirtToPhysAddr_: f74a7878 -> 00000000:02fde878
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x44
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x4
Can't setup transfer mode: statusByte = 0xd0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
  Returning BUSY status
IdeReadWrite: DRQ never asserted (0xd0)
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xb23908e0 complete with status 0x9
AtapiStartIo: AtapiDmaDBSync(b26688e0, b23908e0)
AtapiStartIo: UniataRemoveRequest(b26688e0, b23908e0)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26688e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23908e0, CDB 0xb2390910, AtaReq 0xb2395000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb23908e0
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf757cc90
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x0, data f74a7878, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74a7878)
AtapiVirtToPhysAddr_: f74a7878 -> 00000000:02fde878
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x44
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x4
Can't setup transfer mode: statusByte = 0xd0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
  Returning BUSY status
IdeReadWrite: DRQ never asserted (0xd0)
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xb23908e0 complete with status 0x9
AtapiStartIo: AtapiDmaDBSync(b26688e0, b23908e0)
AtapiStartIo: UniataRemoveRequest(b26688e0, b23908e0)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26688e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23908e0, CDB 0xb2390910, AtaReq 0xb2395000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb23908e0
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf757cc90
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x0, data f74a7878, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74a7878)
AtapiVirtToPhysAddr_: f74a7878 -> 00000000:02fde878
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x44
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x4
Can't setup transfer mode: statusByte = 0xd0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
  Returning BUSY status
IdeReadWrite: DRQ never asserted (0xd0)
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xb23908e0 complete with status 0x9
AtapiStartIo: AtapiDmaDBSync(b26688e0, b23908e0)
AtapiStartIo: UniataRemoveRequest(b26688e0, b23908e0)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26688e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23908e0, CDB 0xb2390910, AtaReq 0xb2395000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb23908e0
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf757cc90
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x0, data f74a7878, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74a7878)
AtapiVirtToPhysAddr_: f74a7878 -> 00000000:02fde878
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x44
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x4
Can't setup transfer mode: statusByte = 0xd0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
  Returning BUSY status
IdeReadWrite: DRQ never asserted (0xd0)
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xb23908e0 complete with status 0x9
AtapiStartIo: AtapiDmaDBSync(b26688e0, b23908e0)
AtapiStartIo: UniataRemoveRequest(b26688e0, b23908e0)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26688e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23908e0, CDB 0xb2390910, AtaReq 0xb2395000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb23908e0
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf757cc90
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x0, data f74a7878, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74a7878)
AtapiVirtToPhysAddr_: f74a7878 -> 00000000:02fde878
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x44
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x4
Can't setup transfer mode: statusByte = 0xd0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
  Returning BUSY status
IdeReadWrite: DRQ never asserted (0xd0)
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xb23908e0 complete with status 0x9
AtapiStartIo: AtapiDmaDBSync(b26688e0, b23908e0)
AtapiStartIo: UniataRemoveRequest(b26688e0, b23908e0)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26688e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23908e0, CDB 0xb2390910, AtaReq 0xb2395000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb23908e0
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf757cc90
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x0, data f74a7878, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74a7878)
AtapiVirtToPhysAddr_: f74a7878 -> 00000000:02fde878
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x44
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x4
Can't setup transfer mode: statusByte = 0xd0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
  Returning BUSY status
IdeReadWrite: DRQ never asserted (0xd0)
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xb23908e0 complete with status 0x9
AtapiStartIo: AtapiDmaDBSync(b26688e0, b23908e0)
AtapiStartIo: UniataRemoveRequest(b26688e0, b23908e0)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26688e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23908e0, CDB 0xb2390910, AtaReq 0xb2395000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb23908e0
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf757cc90
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x0, data f74a7878, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74a7878)
AtapiVirtToPhysAddr_: f74a7878 -> 00000000:02fde878
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x44
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x4
Can't setup transfer mode: statusByte = 0xd0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
  Returning BUSY status
IdeReadWrite: DRQ never asserted (0xd0)
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xb23908e0 complete with status 0x9
AtapiStartIo: AtapiDmaDBSync(b26688e0, b23908e0)
AtapiStartIo: UniataRemoveRequest(b26688e0, b23908e0)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26688e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23908e0, CDB 0xb2390910, AtaReq 0xb2395000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb23908e0
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf757cc90
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x0, data f74a7878, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74a7878)
AtapiVirtToPhysAddr_: f74a7878 -> 00000000:02fde878
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x44
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x4
Can't setup transfer mode: statusByte = 0xd0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
  Returning BUSY status
IdeReadWrite: DRQ never asserted (0xd0)
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xb23908e0 complete with status 0x9
AtapiStartIo: AtapiDmaDBSync(b26688e0, b23908e0)
AtapiStartIo: UniataRemoveRequest(b26688e0, b23908e0)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26688e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23908e0, CDB 0xb2390910, AtaReq 0xb2395000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb23908e0
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf757cc90
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x0, data f74a7878, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74a7878)
AtapiVirtToPhysAddr_: f74a7878 -> 00000000:02fde878
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x44
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x4
Can't setup transfer mode: statusByte = 0xd0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
  Returning BUSY status
IdeReadWrite: DRQ never asserted (0xd0)
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xb23908e0 complete with status 0x9
AtapiStartIo: AtapiDmaDBSync(b26688e0, b23908e0)
AtapiStartIo: UniataRemoveRequest(b26688e0, b23908e0)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26688e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23908e0, CDB 0xb2390910, AtaReq 0xb2395000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb23908e0
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf757cc90
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x0, data f74a7878, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74a7878)
AtapiVirtToPhysAddr_: f74a7878 -> 00000000:02fde878
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x44
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x4
Can't setup transfer mode: statusByte = 0xd0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
  Returning BUSY status
IdeReadWrite: DRQ never asserted (0xd0)
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xb23908e0 complete with status 0x9
AtapiStartIo: AtapiDmaDBSync(b26688e0, b23908e0)
AtapiStartIo: UniataRemoveRequest(b26688e0, b23908e0)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26688e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23908e0, CDB 0xb2390910, AtaReq 0xb2395000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb23908e0
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf757cc90
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x0, data f74a7878, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74a7878)
AtapiVirtToPhysAddr_: f74a7878 -> 00000000:02fde878
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x44
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x4
Can't setup transfer mode: statusByte = 0xd0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
  Returning BUSY status
IdeReadWrite: DRQ never asserted (0xd0)
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xb23908e0 complete with status 0x9
AtapiStartIo: AtapiDmaDBSync(b26688e0, b23908e0)
AtapiStartIo: UniataRemoveRequest(b26688e0, b23908e0)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26688e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23908e0, CDB 0xb2390910, AtaReq 0xb2395000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb23908e0
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf757cc90
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x0, data f74a7878, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74a7878)
AtapiVirtToPhysAddr_: f74a7878 -> 00000000:02fde878
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x44
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x4
Can't setup transfer mode: statusByte = 0xd0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
  Returning BUSY status
IdeReadWrite: DRQ never asserted (0xd0)
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xb23908e0 complete with status 0x9
AtapiStartIo: AtapiDmaDBSync(b26688e0, b23908e0)
AtapiStartIo: UniataRemoveRequest(b26688e0, b23908e0)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26688e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x4d38105a/0x1
  SRB 0xb23908e0, CDB 0xb2390910, AtaReq 0xb2395000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb23908e0
TopLevel (3), AtaReq 0xb2395000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf757cc90
** Ide: Command AtaReq 0xb2395000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x0, data f74a7878, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(PRD=b2395060)
AtapiVirtToPhysAddr_: b2395060 -> 00000000:04c94060
  get Phys(data[0]=f74a7878)
AtapiVirtToPhysAddr_: f74a7878 -> 00000000:02fde878
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: restore IO mode on Device 0, last dev 0
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x44
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x4
Can't setup transfer mode: statusByte = 0xd0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x1:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
  Returning BUSY status
IdeReadWrite: DRQ never asserted (0xd0)
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xb23908e0 complete with status 0x9
AtapiStartIo: AtapiDmaDBSync(b26688e0, b23908e0)
AtapiStartIo: UniataRemoveRequest(b26688e0, b23908e0)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b26688e0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
(../sdk/lib/fslib/vfatlib/vfatlib.c:289) Failed to umount volume (Status: 0xc0000010)
(../sdk/lib/fslib/vfatlib/vfatlib.c:304) Failed to unlock volume (Status: 0xc0000010)
(../base/setup/usetup/interface/usetup.c:3053) FormatPartition() failed with status 0xc00000b5
WARNING:  HvHiveWillShrink at ../sdk/lib/cmlib/hivewrt.c:280 is UNIMPLEMENTED!
WARNING:  HvpWriteLog at ../sdk/lib/cmlib/hivewrt.c:29 is UNIMPLEMENTED!
WARNING:  HvHiveWillShrink at ../sdk/lib/cmlib/hivewrt.c:280 is UNIMPLEMENTED!
WARNING:  HvHiveWillShrink at ../sdk/lib/cmlib/hivewrt.c:280 is UNIMPLEMENTED!
(../ntoskrnl/po/poshtdwn.c:259)        smss.exe is still RUNNING (0000005C)
WARNING:  CcWaitForCurrentLazyWriterActivity at ../ntoskrnl/cc/copy.c:496 is UNIMPLEMENTED!
(../ntoskrnl/po/power.c:241) No system power driver available
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
(../hal/halx86/legacy/halpnpdd.c:825) HAL: PnP Driver Power!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
(../drivers/usb/usbhub/usbhub.c:193) Power Function 3
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
(../hal/halx86/legacy/halpnpdd.c:825) HAL: PnP Driver Power!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
(../drivers/usb/usbhub/usbhub.c:193) Power Function 2
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!
WARNING:  PoStartNextPowerIrp at ../ntoskrnl/po/power.c:621 is UNIMPLEMENTED!