(drivers/usb/usbehci/hardware.cpp:272) Controller has Extended Capabilities Support
(drivers/usb/usbehci/hardware.cpp:287) Controller uses 64-Bit Addressing
(drivers/usb/usbehci/hardware.cpp:489) Starting Controller
(drivers/usb/usbehci/hardware.cpp:563) [EHCI] Extended Caps Support detected!
(drivers/usb/usbehci/hardware.cpp:581) [EHCI] Controller is BIOS owned, acquiring control
(drivers/usb/usbehci/hardware.cpp:626) [EHCI] acquired ownership
(drivers/usb/usbehci/hardware.cpp:714) Interrupt Mask 37
(drivers/usb/usbehci/hardware.cpp:813) UsbSts c000
(drivers/usb/usbehci/hardware.cpp:816) UsbCmd.PeriodicEnable 1
(drivers/usb/usbehci/hardware.cpp:817) UsbCmd.AsyncEnable 1
(drivers/usb/usbehci/hardware.cpp:818) UsbCmd.IntThreshold 8
(drivers/usb/usbehci/hardware.cpp:819) UsbCmd.Run 1
(drivers/usb/usbehci/hardware.cpp:820) UsbCmd.FrameListSize 0
(drivers/usb/usbehci/hardware.cpp:827) EHCI Started!(drivers/usb/usbehci/hardware.cpp:1394) Device connected on port 0
(drivers/usb/usbehci/hardware.cpp:1104) Waiting 100 milliseconds for port to stabilize after connection
(drivers/usb/usbehci/hardware.cpp:919) Waiting 50 milliseconds for port reset
(sdk/lib/drivers/libusb/hub_controller.cpp:334) [USBEHCI] Change state on port 0
(drivers/usb/usbehci/hardware.cpp:1051) Waiting 50 milliseconds for port to recover after reset
(ntoskrnl/mm/ARM3/sysldr.c:3025) ZwOpenFile failed for '\SystemRoot\system32\drivers\vbemp.sys' with status 0xc000003a
(drivers/storage/class/disk/disk.c:2251) HACK: Handling partition 0 request!
(ntoskrnl/io/iomgr/iomgr.c:566) IopCreateArcNames failed: c0000034

*** Fatal System Error: 0x00000069
                       (0x00000000,0x00000000,0x00000000,0x00000000)


Entered debugger on embedded INT3 at 0x0008:0x80945f84.